Tag Archives: Field Reports

Field Reports, Guest Posts, Hams, News, Portable, POTA

Mark finds an opportunity to introduce students to the world of POTA and Ham Radio!

7 Comments

Many thanks to Mark (W8EWH) who shares the following field report:

Right Place – Right Time

by Mark (W8EWH)

This is the story of how I was able to introduce about 40 elementary school kids to Ham Radio and more specifically, POTA.  All by just being at the right place at the right time.

I was activating K-1518 (Maybury State Park) on the morning of May 16th while my wife was at the dentist. As I pulled into the parking lot, I saw a yellow school bus (Holy Redeemer), but no kids.  I figured they must be on a hike or already at one of the many shelters.  So, I parked, grabbed my gear, and walked to the spot where I wanted to activate.  This is a spot I’ve used before – a picnic table under several tall, mature trees with great branches for hoisting a wire antenna.  The location is on the top of a rise at the far end of an open field surrounded by forest. Turns out the shelter at the near end is where the students were, busy with whatever the teachers had them doing.  My activation spot seemed available, so I walked back to it staying well clear of the class.

Set up was straight forward (KX3 and EFHW) and I was quickly on the air on 40M.  Band conditions were good, and I quickly had my 10 contacts to make the activation.  After about 20 contacts there was a break in the action, so I switched to 20M and decided to speak to one of the teachers which, while I was activating, had brought a group of about a dozen students to my end of the field for some sort of activity.  I waived to her and introduced myself, first asking if I was in their way.  She said no, and asked if she was in my way.  Of course not.  I explained what I was doing and offered a demonstration if she wanted to bring some or all the kids over.  She enthusiastically agreed to this.

So about 10 minutes later, the teachers brought the class over to me.  I had them stand behind me in a way that kept them from getting tangled in the antenna and coax.  I introduced myself and explained that I was an amateur radio operator using a portable radio and antenna to contact other people like me as part of an activity called Parks on the Air.

In this case I said, I’m set up here in this state park which makes me the “activator”, and everyone else the “hunters”.  They thought that was funny.  I then told them about the contacts I’d already made to various states around Michigan, and this seemed to get their attention.  I then explained that I was not speaking with them, but instead using Morse Code.  They all seemed to have heard of this before.  OK I said, I’m going to unplug my earbuds, turn up the speaker, and let’s see if we can make a couple contacts.

Before I started calling CQ POTA, I explained what I was going to be sending in morse code.  That I was letting anyone listening know that I was operating from a park, so please call me, and here is my call sign – my amateur radio name.  I also warned them that just like when you go fishing, you don’t catch a fish with every cast.  You must be patient.  They understood.  I was nervous – I’ve never had an audience like this before.  But then I thought, they won’t know if I make a mistake!

It took about 5 or 6 CQ’s before I got bite.  Yes, I was starting to get a little worried!  But then we had a catch and after I finished the back and forth of the contact I said – that was Georgia – and was greeted with a cheer.  Another I said?  Yes!  I sent another CQ and right away another bite.  The kids listened to the back and forth and then I said – Kansas!  Another cheer.

I this point I answered a couple of questions (including one about how I was it that I could understand the noises they were hearing) and then the teachers called an end to the demo so that they could start a nature hike.

I finished up the activation with a handful of additional contacts on 20, 30, and 17 meters, then called it a day.  See Figure 1.  My wife was on her way home from the dentist and she would stop by so we could go for a hike before going home.

I’m so glad I had the opportunity to conduct this demonstration.  I’ll never forget it.  I hope a least a couple of the kids will remember this and become hams in the future.  I only wish I had a handout or two that I could have given the teachers so if they wanted to explore amateur radio with the class later, they’d have some background info and links.  I’ll be ready next time.

Figure 1.  QSO Map for POTA activation of K-1518, via HAMRS..  The contact in Idaho was my one and only on 15M.

Mark Yergin

W8EWH

Accessories, Antenna Tuners, Field Reports, News, Portable, POTA, QRP, Reviews, Videos

POTA QRP: Testing the new JNCRadio CS-818 ATU with my upgraded Yaesu FT-818ND

2 Comments

I love testing new stuff in the field and on Tuesday, May 2, 2023 I had a great opportunity to test a number of new items.

FT-818ND Upgrades

I mentioned in a previous post that I purchased a new Yaesu FT-818ND from DX Engineering on December 28, 2022. It smacked of an impulse purchase only in that I had not planned to purchase the radio that very day.

Thing is, Yaesu announced they were discontinuing the FT-818 and I always planned to purchase one to replace out one of my two FT-817NDs. I didn’t want to miss the opportunity to buy a new one under warranty, so I bit the bullet on short notice.

Within a few days of purchasing the FT-818ND, I also purchased another 500 kHz CW filter, a WINDCAMP 3000mAh LIPO battery and a WINDCAMP Anderson PowerPole Adapter.

I planned to make the FT-818ND my primary HF radio and use the other FT-817(s) for full duplex satellite work (and HF too, of course, especially since one is now in a TPA-817 pack frame).

I had all of the upgrades in hand by mid-February, but that Yaesu FT-818ND sat in its box under my radio bench until late April. I was so busy evaluating other gear and keeping up with my busy family life,  it had almost slipped my mind. Well, that and I received the incorrect narrow Collins filter from a seller on eBay; instead of sourcing a replacement, I decided to steal an original 500 Hz filter from one of my other radios while waiting on a replacement.

Those narrow Collins filters? They’ve become pure unobtainium over the past couple of months. At one point, eBay was chock full of them. No longer…

It had actually been a very long time since I pulled out a brand new (non-loaner) radio from the box. It’s funny because I remember opening my first FT-817 back in…what…2001? The box and packaging were identical some twenty one years later!

I unboxed then immediately opened the chassis of the FT-818ND to add the Collins filter, attach my Portable Zero side rails (stolen from my FT-817), add the Windcamp battery pack, and add the Windcamp Anderson PP adapter.

JNCRadio CS-818 ATU

Around the same time, Jesse, with Chelegance, also sent me his latest ATU: the CS-818 which is specifically designed to work with the FT-817 and FT-818 series radios. To be clear, Jesse sent the MC-818 at no cost to me to evaluate.

The CS-818 actually works with any radio, but it ships with the command cable for the FT-817/818 for full integration.

The CS-818 can handle up to 30 watts of power, so it’ll pair nicely with any QRP radio. If using it with a QRO radio, you’d have to be very careful not to push more than 30 watts.

NOTE: Due to the frame rate of my camera and the refresh rate of the OLED display, only a portion of the display shows up in my shots.

In truth, ATUs don’t get me terribly excited. I’m quite content with my Elecraft T1 and Emtech ZM-2; these two portable ATUs match anything and everything I use in the field. Continue reading POTA QRP: Testing the new JNCRadio CS-818 ATU with my upgraded Yaesu FT-818ND →

Field Reports, Guest Posts, Portable, POTA, QRP, SOTA

My One Day Mini-DXpedition to Switzerland

8 Comments
View from the Swiss Radegg castle over the valley towards Germany

My wife and kids were with her parents for some days, the weather forecast 25° C / 77° F and the following Monday was a public holiday in Germany – perfect condition for an activation day trip during the weekend. With France and the Czech Republic already visited this year, there were two other neighbor countries waiting to be visited: Switzerland and Austria (the one without kangaroos).  Austria is on my schedule for the Ham Radio fair in Friedrichshafen, so it became Switzerland.

The area northwest of the Swiss town Schaffhausen was perfect.

The region has been inhabited for more than 10,000 years.  Schaffhausen started as an independent city-state around 1000 AD and became a Canton later. A canton is a type of administrative division similar to a state, but in European dimensions. The Swiss Confederation, as a whole, is smaller in size compared to West Virginia and has a slightly smaller population than New Jersey. Anyways, in 1330, the town lost all its lands and its independence, but regained its independence back in 1418. Schaffhausen joined the Swiss Confederation as the twelfth member in 1501. In 1944, Schaffhausen experienced a bombing raid by aircrafts from the US Air Forces, which misidentified the town in the neutral Switzerland as their target Ludwigshafen in Nazi-Germany.

The region is not too far from my home, it has a SOTA summit, which is in a POTA and WWFF area, is history-rich and has a second, although German, SOTA summit not too far away.

OpenTopoMap, OpenStreetMap CC-BY-SA, STRM

I started early on that Sunday morning at 8 a.m. The autobahn was nearly empty and just like an invitation to drive a bit faster. Since Corona, I haven’t been using my car very often, so I still had winter tires on, which are limited to 160 kmh / 100 mph.

Since 2008, Switzerland is in the European Schengen Area, so there are no regular border checks. Even before, it was a so-called “Green Border”, i.e. you could often pass it without checks. Without this old, unused border station, you would barely notice that you have crossed the line.

Some minutes later I approached the area, where the first summit is located.

The Wannenberg / Wannebärg (HB/SH-002) is a wooded mountain with an elevation of 661 m / 2168 ft. The peak is rather flat and also wooded. The way from the parking place at the foot of the mountain to the top is rather short and easy, with 2.1 km / 1.3 mi and an ascent of 140 m / 460 ft. Continue reading My One Day Mini-DXpedition to Switzerland →

Articles, Field Reports, Guest Posts, Morse Code, News, Portable, QRP, QRP Radios, QRPp

Guest Post: Lake Thunderbird (K-2792) with a homebrew transmitter!

16 Comments

Activating (sort of) Lake Thunderbird (K-2792) with a homebrew transmitter

Sam Duwe WN5C

When I dove into radio a couple years ago a few sub-hobbies caught my attention: QRP, portable ops, CW, and homebrew. Of course, these all fit nicely together, but in my mind there was a huge leap between soldering an unun and a building a radio. But why not try? What’s the worst that could happen by melting solder and then sitting at a picnic table? This is how I built a simple transmitter and kind of activated a park.

The Michigan Mighty Mite

Nearly everyone has heard about the Michigan Mighty Mite (MMM), a QRPp transmitter popularized by the Solder Smoke blog. There are countless YouTube videos and posts across the internet. It’s very simple: a single transistor, a variable cap, a coil, a crystal and some resistors and a cap. Supposedly one can get up to half a watt of output (I couldn’t). But with a small purchase from Mouser one can oscillate. That seemed pretty cool.

I hadn’t touched an iron until I started playing radio. But I’ve been drawn to homebrew projects. I built a regenerative receiver last year which was very rewarding. I’ve also put together kits (a QCX mini and a TR-35). But my dream has always been to construct a transmitter/receiver combo, or a transceiver. I thought a good place to start was the MMM.

I built the transmitter based on the common schematic for the 40-meter band. The MMM is crystal controlled but I opted to solder in a socket and buy a handful of crystals, so I have the luxury of operating on 7056, 7040, and 7030 kHz. I made a few other improvements, too. The first was to build a low pass filter to attenuate harmonics. Second, although I haven’t finished it yet, the switch on the right will be to choose between multiple crystals. And third, I added a BNC jack to connect a receiver, with a transmit switch. When not in use the transmitter will dump into a dummy load. This receiver switching idea was lifted from the design of the MMM that QRP Guys produces.

When I tested the transmitter at home the best I could get with my charged Bioenno 3 Ah battery was about 300 mW output. The filter is reducing things somewhat, but maybe I need to look into a different transistor or rewind the coil. But I was able to get a 339 signal report from Illinois (no sked) in the midst of distance lightning crashes, so I had a little confidence going forwards. School is out for me this summer, so I decided to head to the park. Continue reading Guest Post: Lake Thunderbird (K-2792) with a homebrew transmitter! →

Field Reports, Morse Code, News, Portable, QRP, SOTA

SOTA on Hibriten Mountain: Testing my new backpack and working a little QRP DX!

5 Comments

On Friday, April 28, 2023, the clouds lifted and I was eager to fit in a brisk hike.

We’d had a few days of wet weather and, in fact, the previous day I performed a POTA activation with my entire station and antenna under the roof of a picnic shelter.

I was visiting my parents and didn’t want to venture too far afield, but still wanted to fit in a good summit activation. The goal was to stretch my legs and to test my Mystery Ranch Scree 32 backpack. Before taking this pack on a difficult summit hike, I thought it might make sense to check the pack’s suspension and fit with it loaded down a bit heavier than I normally would.

This would actually be my second SOTA activation with the Scree 32 pack (here’s the first) but on that first hike, the pack was so light, I barely noticed it was on my back.

Hibriten Mountain (W4C/EM-093)

Hibriten was an easy choice for the day. It’s only a 25 minute drive from my parents’ home and the trail has modest elevation change over the 5.6 mile round trip hike.

The trail is basically a wide, gravel access road for the crews who maintain the communication towers on Hibriten’s summit.

I remembered from my previous activation of Hibriten that the hike was very pleasant.

It certainly was that Friday!

It wasn’t a terribly hot day, but it was very humid as the sun burned off all of the rain we’d received over previous days.

I hiked at a brisk clip to make the most of my workout and, if I’m being honest, I was pretty darn happy to see the summit. Continue reading SOTA on Hibriten Mountain: Testing my new backpack and working a little QRP DX! →

Antennas, Field Reports, POTA, QRP

Pit Stop Style Activation with Elecraft KX3 and AX1

10 Comments

(As is my usual, this article has a bunch of links – click on as many as you wish to receive the full experience)

by Vince (VE6LK)

In May of 2023 I embarked on a two week vacation to Hamilton Ontario, the city of Waterfalls. And I found myself with a spare 30 minutes so I decided to squeeze in an activation.

And as I am an opportunist, I made this decision at 23:25’ish z and I had not yet arrived at the park but the target was only a few minutes away! I would have until 23:59:59z to complete it if I were to be successful. “It’s time to break out the Elecraft AX1 antenna I bought at Hamvention last week“ I think to myself. It would be my first time using the antenna. I had pre-read the instructions and knew what had to be done in order to set it up.

The whole thing would unfold like a Formula 1 pit stop, albeit a wee bit slower <grin>.

Battlefield House

I arrived at VE-5351, The Battle of Stoney Creek National Historic Site and began to scout a location. Pausing only long enough to snap a few photos, I parked and immediately got to work. Continue reading Pit Stop Style Activation with Elecraft KX3 and AX1 →

Antennas, Field Reports, Morse Code, News, Portable, POTA, QRP, Videos

Rainy Day POTA: Setting up the Chelegance MC-750 Vertical Antenna Inside a Picnic Shelter?

7 Comments

On Thursday, April 27, 2023, it was pouring rain, so the perfect time for a little POTA, right–?

Right!

Actually, I had an idea: in the past, I’ve been known to play POTA under the roof of a picnic shelter on rainy days. I’ve even been known to use my AX1 antenna inside the shelter, under a metal roof. Quite a few times, actually.

Of course, it’s not optimal to operate with your antenna under a metal roof, but with POTA? Let’s just say that you can get away with a lot of less-than-optimal antenna deployments.

That’s the benefit of being the DX!

The MC-750 Tripod

An in-the-shelter activation was also the perfect opportunity to test the new Chelegance tripod that fits both the MC-750 and the JPC-12.

A number of readers have reached out asking about this tripod, so when Jesse at Chelegance asked if I’d like to test it, I agreed to do so.

To be clear, he sent this to me at no cost for evaluation. It’s actually quite affordable ($30 on the Chelegance website, $40 at DX Engineering, for example) so purchasing it would have been easy enough, but Jesse also wanted me to evaluate their new FT-818 ATU, so he sent both at the same time (you’ll see the ATU in a future field report).

The tripod feels very sturdy and is simple to deploy. It’s also a little heavy, so keep that in mind if you plan to pack it in for a long SOTA hike.

A number of you have purchased this tripod and have only had positive comments. I now see why.

I speak about this in more detail in the activation video below.

Lake Norman State Park (K-2740)

I decided that it had been too long since I had activated Lake Norman State Park, so I hopped in the car and headed to Troutman, NC! Lake Norman has a number of picnic shelters and covered areas thus a very safe bet.

It was a rainy day so, of course, I pulled into the Lake Norman picnic area only to find one other car there. In fact, by the time I had taken my backpack to the picnic shelter, that other park visitor appeared at a trailhead, hopped in her car, and left.

The picnic shelter sign wasn’t set to “reserved” either, so it looked like I had a green light to claim it for POTA! Continue reading Rainy Day POTA: Setting up the Chelegance MC-750 Vertical Antenna Inside a Picnic Shelter? →

Field Reports, Guest Posts, Portable, QRP

Park and Castle activation at the medieval Helfenstein castle

7 Comments

by Thomas (DM1TBE)

The last weekend was too rainy to operate outdoors. So I welcomed the public holiday on Thursday, which allowed me to take a day off on Friday and have four days off. We call such days “Bridge Day” in Germany, they “bridge” a public holiday to the weekend.

Some time ago, I have suggested a new protected area to the WWFF, the World Wide Flora and Fauna program. The nature reserve Eybtal covers an area of over 1331 hectares / 3300 acres and is the largest nature reserve in the Stuttgart administrative district. The nature reserve is on the edge of the Swabian Alb, and the ruins of the medieval castle Helfenstein are well within the WWFF activation zone.

The Helfenstein Castle is a historic fortress can be traced back to around 1100 AD when it was constructed as a strategic stronghold to protect the surrounding territories.

Coat of Arms

During the 13th and 14th century it was the seat of the Earls of Helfenstein. After a lost battle in 1372 things went south and in 1396 the family of Helfenstein had to sell a large part of its territory, including its family seat.

The new owners expanded the castle into a formidable fortress. They extended the castle walls to include a fortified tower and a second ring of walls.

Around the year 1400, a tower was built on the nearby rock. It served as a lookout and was intended to prevent the castle from being cannon-fired from that location.

During the Second Margrave War in the 16th century, Helfenstein Castle was besieged and heavily damaged. It was subsequently abandoned and fell into ruins.  In the 19th century, there was a renewed interest in medieval architecture, and efforts were made to preserve and restore Helfenstein Castle. The ruins were partially reconstructed, and today, visitors can explore the restored sections. Continue reading Park and Castle activation at the medieval Helfenstein castle →

Field Reports, Morse Code, News, Portable, POTA, QRP

Postcard Field Report: Pairing the Elecraft KX2 and MM0OPX EFHW to face dubious propagation

2 Comments

Welcome to another Postcard Field Report!

I’m still in Dayton after Hamvention weekend, but didn’t want to skip my field report and activation video, so a hope you enjoy the slightly shorter report below:

Zebulon Vance Historic Birthplace (K-6856)

On Tuesday, April 25, 2023, I once again stopped by my weekly POTA spot, the Vance Birthplace.  By mid-May, I will no longer be passing by this excellent little POTA site on a weekly basis, so my activations here will be much less frequent. A shame because I do love this site and its staff!

For this particular activation, I’d planned to test my almost perfectly trimmed QRPguys Tunable EFHW antenna, but I left it at home. Not a problem, actually, because after this activation, I discovered it’s not as resonant as I’d like on the 20, 15, and 10 meter bands, so I may tinker with the toroid windings a bit–perhaps removing one.

Instead, I deployed my MM0OPX EFHW which I thought was actually a great choice considering propagation had been incredibly unstable the previous few days.

Since I also had my Elecraft KX2, I knew I could use its built-in ATU to move to non-resonant bands like 17 and 30 meters.

This activation video is a long one because I had quite a lot of time to play radio and, frankly, it was nice taking things at a casual pace.

After deploying the antenna (twice!) I set up the radio, connected my Begali Traveler, and hopped on the air! Continue reading Postcard Field Report: Pairing the Elecraft KX2 and MM0OPX EFHW to face dubious propagation →

Field Reports, Hacks and Hints, Kits, Portable, Skills

Are you prepared for Radio First Aid?

10 Comments

by Vince (VE6LK)

(As is Vince’s usual, this article has a bunch of links – click on as many as you wish for the full experience)

Before I go too far into this topic, I wish to first offer hearty congratulations to Thomas Witherspoon for having one thousand posts on QRPer.com! Woo-Hoo!

Do you pack a Radio Field First Aid kit?

On my recent trip to VE3-land I had a few opportunities to practice set-up with my gear–away from the safe place that is my truck–to ensure I’d brought everything for my trip to Hamvention and activations along the way. I did forget an audio cable, however a visit to a local dollar store solved that problem inexpensively.

So, unless you pack two of everything -because two is one and one is none– you should expect that something’s going to fail or break along the way. What you never know is when or how that’s going to happen. I wouldn’t be writing this story if it had not happened to me before.

This time it was on a Sunday outing to VE-1512, the McLaughlin Bay Reserve Wildlife Area in Oshawa Ontario and far away from the comforts of my shop at home. Tucked away not far off of the 401 Highway, this nature reserve is a calm and peaceful oasis just minutes from urban life. I saw kayakers, hikers and trail runners during my visit.

Setting up my Comet HFJ-350M, I added the jumper cable to set the antenna for 20m and then I started to push the antenna down into the ground onto the stake. And that’s when my hand slipped and I broke the jumper cable connector, busted off in the hole.

Broken pin that triggered my outward potty mouth

For the inquisitive among you, my inner potty mouth made a brief outward appearance, ahem. Continue reading Are you prepared for Radio First Aid? →