This granted me full HF privileges and I even obtained the callsign VY2SW within an hour of requesting it the following morning.
No visit to Ottawa would be complete without snagging this photo!
Of course, I was very eager to use the new callsign on the air!
Finding a park
A few weeks prior to our trip, I checked out all of the POTA sites within a short distance of our hotel in Ottawa.
Turns out, there are loads of parks in the Ottawa/Gatineau region so I was spoiled for choice!
Since Ottawa is the capital city of Canada, there’s no shortage of provincial and national parks in the area. (Washington DC is very similar in this regard.)
What, at first, surprised me was the number of parks that had either never been activated or had only been activated a handful of times. Taking a closer look in advance and with the assistance of Google Street View, I could see that many of these entities are simply historic buildings/sites or formal parks in the city with no easy means of activating without special permission.
Hog’s Back Conservation Reserve (VE-1596)
Shortly after noting on QRPer that I’d be in Ottawa a few days, a reader named Andrew reached out and offered advice about local parks. He suggested the Hog’s Back Conservation Reserve since it was only a 15 minute drive from our hotel. We made plans to meet up there for the activation.
If you’ve been following my field reports and activation videos, you’ll note that I’m almost twomonths behind posting them at present.
Much of this is due to the fact that I made numerous activations during a camping trip at New River State Park with my family in April and many more activations during a camping trip with WD8RIF and KD8KNC in West Virginia in May.
May was an extremely busy month for me family-wise and I was fitting in Canadian Basic Exam prep during any free time I had because my goal was to write the Canadian Basic exam within the first few days of arriving in Canada.
Looking at my field report back log, I’ve got a few more reports from both the NC and WV camping trips, but I’ve decided to put them on hold for a bit so that I can post more recent ones. Plus, it might be fun posting late spring field reports this fall!
One of the things I love about writing these field reports is re-living the activation.
Objectif Québec
We began our road trip to Canada on the morning of June 15, 2022.
Our first stop would be Pine Grove, Pennsylvania, the second stop Ottawa, Ontario (for three nights), and then our final destination of St-Ferréol-les-Neiges, Québec. All in all, we’d log 1,306 miles/2,102 km not including side trips.
Although I sort of fantasize about all of the amazing parks I could activate during our travels north, in reality this road trip was all about reaching the destination in fairly short order to save on hotel expenses en route.
The first leg of the trip equated to a good 10 hours on the road including stops to refuel, stretch our legs, and grab a bite to eat.
That first day, I’d completely written off the idea of performing a POTA activation assuming we’d arrive in Pine Grove, PA too late and too tired.
Turns out, though, we got an earlier start than we had anticipated, so arrived in Pine Grove around 16:00 local. That afternoon, everyone was eager to take a stroll or hike to shake off all of those hours of sitting in the car.
I checked my POTA Map and then cross-referenced it with my All Trails app to find the closest park with proper hiking trails. Turns out Swatara State Park met both criteria and was a mere 8 minutes from our hotel. Woo hoo!
Honestly: Swatara couldn’t have been more convenient for us.
During my West Virginia POTA expedition with Eric (WD8RIF), Miles (KD8KNC), and Theo (The “Great Warg”) dog, the last park we hit on Friday, May 20, 2022 was Gauley River National Recreation Area (the first park was New River Gorge and the second was Hawk’s Nest State Park).
Back in the days of National Parks On The Air (2016), I activated this site (the Gauley River, actually) but it was snowing, the winds were howling, and being on a tight schedule, I didn’t hang around to explore the site.
Gauley River National Recreation Area (K-0695)
Gauley River with the prominent Summersville Dam in the background.
On Friday, May 20, 2022, the weather was nearly ideal.
Eric, Miles, and I decided to venture down to the river for our activation.
We knew that it would compromise our signals to some degree setting up at the base of the Summersville Dam instead near the top, but how can you pass up scenery like this–?
The banks of the river were very rocky and there wasn’t a lot of space for Eric and I to separate our stations, so we knew our signals might interfere with each other.
Eric and Miles setting up.
Eric set up his trusty 31′ Jackite pole which supports a 28.5 vertical wire–the entire setup is attached to his folding chair. FYI: Eric tells me he’ll do a little write-up here on QRPer.com detailing his antenna setup in the near future.
As you might have guessed, I’m a bit of a QRP radio addict.
Over the years, I’ve owned and sold quite a few rigs; there are some models that gave me instant seller’s remorse.
In the past, I sold good QRP radios to buy “better” ones: transceivers that had a more compact form factor, better feature set, better battery management, or other desirable updates/upgrades.
Boomerang!
In almost every case when I experienced seller’s remorse, that particular model of radio has eventually found its way back into my field kit.
I sold my Elecraft K2/100 to fund the purchase of my Elecraft KXPA100. I don’t regret purchasing the KXPA100 in the slightest (even though I so rarely use it), but I do regret selling not one, but two K2s over the years! I’ll snap one up if I find a good deal.
I also sold my Elecraft K1 to help fund the purchase of my Elecraft KX3 in 2013.
At the time, the seller’s remorse wasn’t immediate because the KX3 was such a revolutionary portable radio in almost every respect. The K1 seemed so limited in comparison.
Still, since I started doing CW POTA and SOTA activations, I’ve been keeping an eye out for a good deal on another 4 band/ATU Elecraft K1.
Why does the K1 have appeal when I have so many “superior” radios at my disposal–?
Good question! I reckon I just like it.
(Image via WD8RIF)
The K1 feels more like an analog radio rather than a digital one; no doubt, this is due to its VFO’s limited range. It’s more akin to an analog radio with a digital frequency display.
The K1 is also super compact for a radio with a traditional tabletop form factor. The menus and features take a bit of time to learn–they’re cleverly implemented, but you definitely need an owner’s manual or cheat sheet to master them.
The K1 is not general coverage; it can only be configured to operate on a maximum of four CW bands. It does have an internal ATU option, but I don’t think it’s on par with the KX-series internal ATUs in terms of matching range. It works well with a variety of field antennas, though!
The K1 does have a very low noise floor and wonderful audio. Those are perhaps the two things I love most about it.
Hawks Nest State Park (K-1813)
During my West Virginia POTA expedition with Eric (WD8RIF), Miles (KD8KNC), and Theo (The “Great Warg”) dog we hit Hawk’s Nest State Park on Friday, May 20, 2022; this was our second park of the day (New River Gorge was our first).
En route to the site, Eric suggested I use his Elecraft K1 travel kit during this activation and I quickly accepted the offer!
I used everything in Eric’s Kit save the antenna.
Photo courtesy of WD8RIF.com
Instead, I paired the K1 with the homemade 40M End-Fed Half-Wave MW0SAW kindly sent me.
I also used a 50′ of feedline so that I could move the antenna as far away as possible from the picnic shelter Eric and I would both be using during the activation.
The long feedline also made it possible to set up the antenna in a way that it wouldn’t interfere with any park guests who might walk by.
The separation/distance from Eric’s Tri-Bander antenna worked a charm: there was very little interference between our two stations.
I started the activation by calling CQ POTA on 20 meters. Funny: I actually thought I was on 40 meters; the K1 display (much like that of the KX1) only shows the last three digits of the frequency display; when I saw “61.1” I assumed “7061.1” but of course it was actually 14061.1. I realized this as I later changed meter bands.
Although the propagation forecast was pretty dismal, the EFHW performed very well.
Within 18 minutes, I logged 16 hunters (including WD8RIF some 20 feet away).
I then moved to the 40 meter band (so Eric could move to 20) and worked an additional six stations in six minutes!
The final contact was both an HF and eyeball QSO with WD8RIF. I got that on video–very much a fun first for me!
QSO Map
Here’s what my five watts into an end-fed half-wave looked like on a QSO Map:
Activation video
Here’s my real-time, real-life video of the entire activation with WD8RIF. I include a bit about Eric’s station and also his QRPguys Tri-Bander antenna after I go QRT. As with all of my videos, there are no ads and I don’t edit out any of the activation:
Make sure to check out Eric’s field report which includes details about his KX3 set-up that you’ll see in the video above.
Thank you!
We spotted this little guy on a hike after completing the Hawks Nest activation.
Thank you for joining me (and Eric, Miles, & Theo) on this POTA activation.
Although detailed field reports take a few hours to write-up and publish (along with activation videos), I truly enjoy the process. It gives me a chance to re-live an activation and share the whole experience with kindred spirits. This was such a fun activation.
Of course, I’d also like to send a special thanks to those of you who have been supporting the site and channel through Patreon and the Coffee Fund. While certainly not a requirement as my content will always be free, I really appreciate the support.
Oh, and if you have a four band Elecraft K1 with ATU you’d like to part with? Get in touch with me! 🙂
More specifically, I wanted to activate the park by way of the scenic one-way road that starts near the New River Gorge Visitor’s Center and descends down to the Tunney Hunsaker Bridge (the “old” New River bridge).
Why? Because in December 2016 during the National Parks On The Air (NPOTA) program, I passed through West Virginia and activated some very rare parks on my way to a multi-day park run with Eric in Ohio. I fully intended to activate the New River at this very spot (underneath the “new” New River Bridge) after hearing how amazing the drive was from Eric.
Unfortunately, I happened to time my trip through West Virginia on a day when we received about an inch of snow. Even though (at the time) I was driving a Toyota minivan with nearly bald tires, the snow didn’t pose a problem at any other site, save this one. I had to change my plans and activate the New River in a spot where the access had less elevation change on a narrow snow-covered road. With my Subaru, this wouldn’t have been an obstacle in the slightest.
I was looking forward to going back to this site and was very pleased to see that Eric and his son, Miles, had already planned this trip in the draft itinerary!
New River Gorge National Park (K-0696)
On the morning of May 20, 2022, Eric, Miles, Theo the dog, and I left our campsite at Babcock State Forest and made our way to the New River Gorge Visitor’s center next to the New River Bridge.
If you’re ever in this area, I’d highly recommend checking out this visitor’s center as it has some well-designed exhibits detailing the impressive engineering that went into the construction of the New River Gorge Bridge.
There are also some fantastic views from the visitor’s center and from its short gorge overlook trail.
From the trail overlook at the visitor’s center we could see the spot where we planned to activate near the Tunney Hunsaker Bridge deep in the gorge (see photo above).
The drive into the gorge was quite scenic with a number of spots to park and take in the enormity of the New River bridge.At the bottom of the gorge, the view was pretty spectacular as well!
My partners in crime: Eric, Miles and “The Great Warg” (Theo the dog)
Tufteln 9:1 EFRW (End-Fed Random Wire) antenna
I mentioned in a previous post that long-time QRPer.com reader and supporter, Joshua (KO4AWH), runs an Etsy store with a wide range of products primarily designed for field operators.
Besides the Elecraft T1 protection case I mentioned previously, he also sent a couple of his QRP field antennas for testing and evaluation (to be clear: free of charge). Thanks, Joshua!
This year, instead of attending the 2022 Hamvention, my buddy Eric (WD8RIF) and I hatched another plan.
Eric and I–along with his son Miles (KD8KNC) and sometimes Mike (K8RAT)–attend Hamvention every year it’s held. We’d planned to do the same this year especially with it being the first in-person Hamvention since 2019.
As Hamvention approached though, we both had a lot going on in our lives and decided to save a little money, a lot of travel time, and meet in West Virginia for several days of POTA activations and just hanging out. I explain a bit more about the decision in this previous post.
On the afternoon of Thursday, May 19, 2022, we (Eric, Miles, Theo the dog, and I) met at Babcock State Park and set up our tents at the adjoining campsites we’d reserved.
Babcock would serve as our home base for the entire WV POTA expedition.
As a bonus, Babcock State Park (K-1798) is also a POTA entity, so we activated it in the late shift after dinner each evening.
As soon as the tents were deployed that afternoon, we all jumped into Mile’s Subaru with our radio gear and hit our first park!
Beury Mountain Wildlife Management Area (K-7036)
Beury Mountain WMA is so close to Babcock State Park, I have to assume they share a common boundary.
Looking back at last year (2021), if I had to pick out one of the easiest SOTA activations I made, Mount Jefferson would be near the top of the list. It’s a very accessible summit although not technically a “drive-up” summit because you will need to walk a short distance up a service road to the activation zone (AZ).
Mount Jefferson (W4C/EM-021) is located on and protected by the Mount Jefferson State Natural Area (K-3846), so when you activate Mount Jefferson for Summits On The Air, you can also claim the activation for Parks On The Air and World-Wide Flora and Fauna as long as you work at least 10 contacts.
What I love about POTA and SOTA “2-fer” sites like this is that you can set things up to be spotted in both systems (and often the WWFF system, too!) which increases your audience of hunters and chasers, thus increasing your odds of achieving a valid activation in all programs. It’s especially desirable if you’re a CW op and know you may potentially be in a spot with no mobile phone service for self-spotting; if, for some reason, RBN auto-spotting functionality is down with one program, the other serves as a backup.
Mount Jefferson is at least a two hour drive from my QTH, but it was easy pickings on April 29, 2022 because it happened to be within spitting distance of New River State Park where I was camping with my family.
Mount Jefferson (W4C/EM-021)
The drive to Mount Jefferson took all of 20 minutes which was a good thing because our family had other activities in store that day including some extended hikes!
Regular readers of QRPer.com might question the wording in my title since I’ve already posted several field reports and even a full review of the Xiegu X6100. So why would this X6100 be considered a “new” radio–?
Since I go over this in more detail in the activation video (linked and embedded below), I’ll give you the nutshell version here:
My activations with the X6100 early this year (2022) were all performed using a loaner unit sent to me by Radioddity. I kept that unit for a few weeks, shipped it on, and purchased one of my own.
In February, when I received the X6100 I purchased, I immediately noticed a small mechanical issue with the encoder.
This is the X6100 open. You can see the back of the encoder to the right of the ribbon cable.
I tried fixing it (with instructions received from Xiegu) but in the end had to return the transceiver for replacement.
The X6100 unit in this field report is my replacement–technically, the third X6100 I’ve had in my hands, and this was my first activation using it.
Many of you have asked why I haven’t taken the X6100 to the field more often this year and this is why. I basically didn’t have a functioning unit for most of February, March, and April. Radioddity was quite responsive to my issues with the X6100, but frankly I had a lot going on during that time frame so it took longer than normal to troubleshoot, modify, test, and send back the faulty unit.
Fortunately, the replacement X6100 has no encoder issues other than the brake is very tight. I’m not willing to break the warranty seal on this unit to adjust it, so I’ll just live with a much-tighter-than-I’d-like encoder.
[Update: Bob (W0BNC) points out that the tight brake is due to friction caused by a felt pad under the X6100 encoder knob. The remedy is to pull off the rubber ring around the encoder knob, loosen the set screw, lift the knob slightly off the body, and retighten. I’ll do this when I’m back with the X6100 after summer travels. Thanks, Bob!]
X6100 field kit test
This activation was also the perfect opportunity to test all of the components of a dedicated field kit I’m building around the X6100.
Eventually, I’ll replace the speaker wire with some thinner Wireman stuff and it should all fit in the Hound pack, albeit snuggly!
I’ve decided that the X6100 will live at my parents’ home in the NC foothills, so I’ll always have a field radio kit available while staying there overnight.
I took the family on a multi-day camping trip at New River State Park in April 2022. During that trip, I made an activation of New River each day and also fit in a quick SOTA activation (click here to read an overview). I didn’t film all of my on-the-air because some of that radio time was spent sitting around chatting with my family and even some neighbors at the campground.
Since I’ve already posted a summary of that fine trip, and since I’m traveling today, I’ll keep this field report brief(er).
Morning POTA
One thing I love about POTA while camping is how effortless it is to do morning activations. You simply roll out of bed and get on the air. That easy.
The following field report was for an activation session on the morning of April 29, 2022.
I spent the early morning that day brewing a couple cups of coffee and catching up on my QRP Quarterly and QST, then I took Hazel on a short hike.
The weather in/around Québec City has been amazing lately; nice cool mornings and warm, clear days. I know this probably won’t last, so we’ve been taking advantage of it as much as possible (il faut en profiter, as francophones like to say).
Yesterday, we had a few errands to run in town: we needed to pick up some groceries, order a tarte au citron for my birthday (today!) from our favorite patisserie Pralines & Chocolatin Château-Richer, and yes, enjoy the great outdoors.
I wasn’t entirely sure if I’d be able to fit in an activation, but I tucked my KX2 radio pack in the car just in case. I didn’t take the camera because it was family time and if I managed an activation, I didn’t want to film it this time. That, and I have a huge backlog of activation videos I need to publish; I sidelined a lot of my field reports while studying for the Canadian Basic exam over the past month.
Le Domaine Maizerets (VE-5020)
We decided to hit one of our favorite little parks conveniently located on the east end of Québec City (Beauport): Le Domaine Maizerets.
We’ve been to this park a few times in the past to attend a Celtic festival and to meet with friends.
The grounds are beautiful and there are loads of foot paths.
I was a bit surprised it had never been activated because this is a very popular park and even has free entry with free parking.
Keeping it Stealthy
I decided I wanted to stay fairly low-profile while doing this activation. I wasn’t worried about permissions (families, friends and groups meet here for all sorts of activities) but I wanted to see just how stealthy I could be while operating from a park bench in a city park. I don’t get this opportunity a lot because, back home, I’m usually operating from rural state/national parka and in remote game lands.
We found a couple of benches at the edge of the park that very conveniently had perfect antenna trees behind them.
While no one was watching, I deployed the PackTenna 9:1 random wire antenna; the jacket on its radiator is black and simply disappears with trees and flora in the background.
The wire is next to impossible to see from even 5 meters away
The more conspicuous parts of the antenna–the feed point and RG-316–were tucked away behind the park bench.
My high-visibility arborist throw line was hidden behind the tree and out of sight from those walking on the footpath.
From the footpath, you couldn’t see the antenna, coax, nor the throw line unless you were looking for it.
From behind the bench, you could though; in the very unlikely event someone would have walked behind us, it was pretty conspicuous (always avoid antenna tripping points). That and my family would have warned anyone coming near.
The Elecraft KX2 was a natural choice for this activation: it’s all-in-one and incredibly compact. I can also operate it and log using the knee board Carolanne (N0RNM) kindly made for me last year. No picnic table needed.
Operating CW with earphones is insanely stealthy. A CW op makes almost no noise whatsoever.
One of my daughters (K4TLI) was kind enough to log for me on my Microsoft Surface Go (using N3FJP’s AC Log).
Here’s what I looked like to anyone passing by:
Click to enlarge – Photo courtesy of K4TLI
My wife (K4MOI) and other daughter (K4GRL) were on the bench next to us sketching and painting. We looked like any other family at the park simply enjoying the amazing weather.
On the air
This was only my third activation here in Canada using my new Canadian callsign: VY2SW.
I’m still getting use to sending the new call; it flows well for me, but my muscle memory keeps kicking in and I find myself accidentally sending K4SWL. 🙂
Since I’m in Québec but have a Prince Edward Island callsign, I do intermittently add a /VE2 to the end of my call. It’s a fistful (VY2SW/VE2) so I don’t use it with every exchange or CQ.
Conditions lately have been absolutely in the dumps and yesterday was no exception.
When a propagation path opened, it was great, but conditions were very unstable with severe QSB.
I spent the better part of an hour hopping between 30, 40, and 20 meters to scrape together enough contacts for a valid park activation.
40 meters was absolutely dead due to flaring. I tried hunting a few CW and SSB stations there, but if I could hear them, they were barely audible.
20 and 30 meters served me better, but the QSB was so deep and frequent, I had to repeat my exchange on a number of occasions. Some stations would call me with a 599+ signal and after my reply with signal report, they were then barely audible.
Still, I managed to snag my ten with a couple to spare. 🙂
Many thanks to all of you who waded through the ether to reach me on the other end.
QSO Map
It’s interesting looking at the QSO map post-activation. My best DX (EA4B) was easily the strongest station I worked with my 5 watts.
Click to enlarge the map:
This activation was so much fun.
Sure, contacts weren’t frequent but they were all meaningful and, frankly, none of us minded spending time outdoors on such a gorgeous day! It added an extra dimension keeping things very stealthy, too.
Thank you
Thanks for reading this field report. Now that my Canadian exam is in the books, I’ll have time to catch up on the numerous activation videos in the backlog!
Of course, I’d also like to send a special thanks to those of you who have been supporting the site and channel through Patreon and the Coffee Fund. While certainly not a requirement as my content will always be free, I really appreciate the support which allows me to open up my work life to write more field reports and film more activation videos.
I hope you get a chance this week to play radio outdoors or chase/hint some park, island, or summit activators!
QRP radios, product announcements, reviews, news and more. Low power amateur radio fun!
Please support QRPer by adding us to your whitelist in your ad blocker. Ads are what helps us stay online. All of our ads are ham radio related--no junk, we promise! Thank you!
As I mentioned in my previous field report, the afternoon I arrived in Canada, I somehow managed to pass my Basic exam with honors.
Since Ottawa is the capital city of Canada, there’s no shortage of provincial and national parks in the area. (Washington DC is very similar in this regard.)
Shortly after noting on QRPer that I’d be in Ottawa a few days, a reader named Andrew reached out and offered advice about local parks. He suggested the Hog’s Back Conservation Reserve since it was only a 15 minute drive from our hotel. We made plans to meet up there for the activation.
