Tag Archives: Castle Clinton National Monument (K-0913)

Conrad packs the Elecraft KX3 and AX1 for a New York City POTA Rove

Many thanks to Conrad (N2YCH) who shares the following field report:


New York City Park Rove, December 30, 2022

Conrad Trautmann, N2YCH

After being bitten by the Parks On The Air (POTA) bug, I became an activator in early 2022. I was hooked. Digital, and specifically FT8 & FT4, is the mode I prefer. A lot of experimentation ensued until I was able to refine my POTA setup to an Icom IC-7300 powered by a Bioenno 20ah battery mounted in a four rack unit Gator case and a Buddipole dipole antenna on a push up mast.

As a radio broadcast engineer by trade, I was very focused on maximizing performance and coverage and after much refinement and trying different things, I feel like my POTA kit performs well. I’ve made contacts as far away as Indonesia, Japan and Israel using the POTA setup in a park… so mission accomplished.


The POTA kit above is not something I can easily take with me on a business trip however, especially by air, so I turned my sites to a Xiegu G90 and various end fed half wave antennas and fiberglass masts and more Buddipole parts to pack into my carry-on luggage. Now I could activate parks wherever I could fly to and I’ve completed successful activations in Wisconsin and Georgia.

Still, I needed to pack a second bag and check the luggage to do these trips. What I really wanted was something I could carry on the plane with me.

I knew I had to change my point of view on what I could achieve using a portable kit. A small radio and antenna wasn’t going to get me contacts in Indonesia, but I could transmit far enough to have someone hear me and get my ten contacts to activate a park. Researching my options online constantly brought me to videos and blog posts here on QRPer.com. Thomas loves his Elecraft KX2 and in a few field report videos he demonstrates an Elecraft AX1 antenna connected directly to the radio for some fast CW POTA activations. This setup was appealing because of the size and he always has a successful activation.

I researched the Elecraft options and the KX3 seemed like the right radio for my digital activations. It has a DATA mode, it can run split operation, it’s got a wideband filter setting and while Elecraft only recommends 5 watts for data modes, it can do up to 10 watts. I managed to find and purchase one gently used on eBay.

I installed the Pro Audio Engineering Kx32 aftermarket heat sink to be sure I protected the final output transistors from overheating and use a Signalink model USB SLUSBKX3 as a sound card interface to the computer. The Signalink can key the radio using the audio keying feature, but I chose to use the Elecraft KXUSB cable to use CAT control and let WSJT-X key it instead. It also allows WSJT-X to read and control the radio’s frequency for easy band changes. I have a Bioenno BLF-1209A 9Ah battery to run it rather than use the internal batteries and I haven’t come close to running the battery out on an activation yet.

Then I bought the Elecraft AX1 antenna with the 40 meter AXE1 optional antenna extender and the AXT1 tripod adapter. It is tiny. There’s really no other way to describe it. It’s a little, baby antenna. Fully extended, it is about four feet tall. I was highly skeptical of how this might perform given its size. I’m using a 25’ Buddipole RG-58 A/U 50 ohm MILSPEC-17 cable terminated to BNC connectors to get the antenna away from my computer because I’ve found that RF and USB do not play well together. I typically try to get the antenna situated in a nearby spot, with a little distance between it and the computer. I bought the Maxpedition Fatty Pocket Organizer Thomas suggested on QRPer.com and a little Amazon Basics Lightweight Mini Tripod.

The AX1, the adapter and tripod all fit in the organizer with room to spare and it fits into a backpack with the radio, battery, cables and my Lenovo Thinkpad 3 laptop. I’m also able to fit in the the Bioenno battery and laptop chargers. At the urging of my XYL, I also have a printed copy of my license in the backpack, too. I haven’t had to show it to anyone yet, but I’m ready, just in case. The backpack is a Mindshift model 18L, designed for photographers, but is easily adapted to contain all of the components I need for a portable activation. Here’s a photo…

So now I’ve got a completely self contained POTA kit in a backpack that can be carried aboard a plane. Continue reading Conrad packs the Elecraft KX3 and AX1 for a New York City POTA Rove