Category Archives: Portable

Digital Modes, Field Radio Kits, Guest Posts, News, Portable, POTA, QRP

Field Radio Kit Gallery: KI7URL’s (tr)USDx Ultralight Portable Kit

3 Comments

Many thanks to Jim (KI7URL) who shares the following article about his portable field radio kit which will be featured on our Field Kit Gallery page. If you would like to share your field kit with the QRPer community, read this post. Jim writes:

(tr)USDx Ultralight Portable Kit

by Jim (KI7URL)

I like to take amateur radio with me wherever I go. In my backpack, I keep a Yaesu FT-60 (powered by 18650 batteries, but that is a different discussion). But I do not like to limit myself to VHF/UHF.

My wife, on the other hand, does not think my “go bag” should take up a significant portion of our suitcase when we travel. I did build a slimmed-down go kit with my Yaesu 891, but that was still north of 12 pounds (vetoed by Wife). Then, I made a go kit with my Yaesu 818, but that was still near the 10-pound zone (again, vetoed). I needed a slimmer package.

I turned to the likes of the QCX mini or other CW-only radios. The problem is that I still am far from proficient with my code, so relying only on CW was a bit more frustrating than I wanted it to be. The (tr)USDx, an open-source radio about the size of two stacked decks of cards, interested me in both price point and functionality. It has SSB, CW, and digital capabilities….on five different bands! Once it was in my hands, I had to build a kit around this new radio!

I want to keep my radio protected, so I started with a small dry box. On the inside, I printed a ‘redneck laminated’ (see also: packing taped) a quick setup guide for using the radio on digital modes if I ever have an in-field case of “the dumb.”

The radio is powered by a small RC battery. I chose this for size, weight, and availability (had it lying around from another project). When fully charged, it reads 12.6 volts. I added powerpole connectors to it because who does love powerpoles (be careful not to short the battery when adding power poles)? I have a small power adapter that goes from powerpoles to the 1.3mm connector so I can use my bench supply or other power sources without making another cable.

I have two antennas that I use (a K6ARK end fed and a QRP Guys No-Tune end fed with 26 gauge wire for 20m). But I like the QRP Guys one because I mostly do 20m and I think it was slightly lighter than the K6ARK antenna (don’t quote me on that though, I loaned the K6ARK one out and have not gotten it back). Plus, not having a tuner lightens my load as well!

Deployed for digital modes.

I have a retired smartphone in my kit that I use for some logging and some other ham-related apps, but mostly for FT8 using the FT8CN app. I also have WoAD on there and soon I hope I can get WinLink functionality with a small TNC as per this video by OH8STN. HF WinLink would be a good benefit with a lighter load than packing in a laptop or Raspberry Pi.

The kit weighs in at 2 pounds 6 ounces (just over a kilogram). This could be stripped down if I only did an SSB, Digital, or, gasp, a CW activation. But as it stands, the small form factor and low weight make the wife happy!

73,
Jim
KI7URL

Equipment:

Antennas, Field Reports, News, Portable, POTA, QRP, QRP Radios, Videos

Amazing POTA Fun: Pairing the Elecraft KX1 and AX1…but first, a little lunch!

8 Comments

I was speaking with my buddy Joshua (N5FY) in mid September. He’d recently acquired an Elecraft KX1 and the topic came up about pairing the KX1 with the AX1 antenna. I realized that in all of my experimenting with the AX1, I’d never paired those two. What!?!

Time to fix that!

On Thursday, September 28, 2023, I had a nice midday window to play radio. After dropping my daughters off at their classes, I stopped by the French Broad Food Co-op and grabbed a container of their chicken noodle soup from the refrigerator section.

I then made my way up the Blue Ridge Parkway (K-3378) to the Craggy Gardens Picnic Area at Bearpin Gap–one of my favorite spots on the BRP.

Despite stunning weather and the beginnings of fall foliage, the parking lot was pretty empty. After all, it was a Thursday and a good week or two before leaf-lookers descend upon western North Carolina.

I pretty much had the picnic area to myself (there was one other person there). I picked a picnic table at the top of the hill under the trees.

Mahlzeit!

When my wife and I lived and worked in Munich, the salutation I learned before any other was “Mahlzeit!” At Siemens, I remember walking through the hallways and people I’d never met before exclaimed “Mahlzeit!” as I passed by.

I quickly learned that Mahlzeit essentially meant “Lunch Time!” and I still say it today to my family when I’m about to make or grab some lunch. Funny how these things stick with you.

Now where was I–? Oh yes…

First thing I did at Craggy was set up my stove to start heating the soup. I show this in my activation video below.

If interested, here are the components of my stove kit:

Quick continuity check!

Next, it dawned on me that I would need to attach the AX1 counterpoise to the KX1. I didn’t bring one of my copper clamps to attach to the outside of the AX1’s BNC connector, so I needed to find another grounding point on the KX1.

I then remembered that the KX1 has two thumb screws on the bottom of the radio. Knowing Elecraft, I assumed that these screws could be used as an attachment point for a counterpoise, but I wanted to confirm that the screw itself had a direct connection to ground.

Fortunately, I keep a small multimeter in my supplemental gear bag in my car. It’s an inexpensive Allosun Pocket Multimeter. I use it for things like this: testing.

I set the multimeter to read continuity and then placed one probe on the outside of the KX1’s female BNC and the other on one of the thumb screws. Sure enough, there was a direct connection to ground. I didn’t need to worry about the KX1 chassis paint insulating the connection to ground because the thumb screw had a direct connection. Perfect! Continue reading Amazing POTA Fun: Pairing the Elecraft KX1 and AX1…but first, a little lunch! →

Field Radio Kits, News, Portable, QRP, QRP Radios

Field Radio Kit Gallery: KF6IF’s Elecraft KX2 Field Radio Kit with Homebrew AX1

11 Comments

Many thanks to Phil (KF6IF) who shares the following article about his portable field radio kit which will be featured on our Field Kit Gallery page. If you would like to share your field kit with the QRPer community, read this post. Phil writes:

Hi Thomas,

As requested here is my Elecraft KX2 Field Kit:

Antenna Gear:

  • AX-1 homebrew clone
  • AXB1 Whip BiPod
  • 90 degree BNC connector
  • PL259 / BNC connector
  • 13′ ground wire with lug
  • K6ARK Winder  with two 25′ speaker wires, banana plugs, and plastic carabiners
  • Double Banana Jack to BNC female Adapter

Operating Accessories:

Field Radio Kits, News, Portable, QRP, QRP Radios

Field Radio Kit Gallery: WQ7O’s Simple QCX-Mini Field Kit

1 Comment

Many thanks to Dennis (WQ7O) who shares the following article about his portable field radio kit which will be featured on our Field Kit Gallery page. If you would like to share your field kit with the QRPer community, read this post. Check out Dennis’ field kit below:

Thomas,

Like you, I have a number of QRP radios with differing deployments. Some go in the trunk of the car, others go in my shirt pocket.

Here is a fully featured QCX-Mini station in a Tupperware container.

While I believe QRP operation and non resonant antennas should be mutually exclusive, I have the Elecraft T1 as an option. Also when I burn a hole in the sky going QRO, the TalentCell gives me full 5 watts. If needed they both fit in the antenna sack. The 9 volt rechargeable is for normal use.

Earbuds, key and EFHW and I am QRV.

Dennis, WQ7O

Antennas, Articles, Field Radio Kits, News, Portable, POTA, QRP, QRP Radios, Travel, Videos

Coffee, QRP, & Question: Is any field kit more portable and versatile that Elecraft’s KX2/AX1 combo?

34 Comments


Lately, I’ve been kitting out another fully self-contained field radio kit that would be small enough to fit in my EDC (everyday carry) laptop bag–something super compact.

I’ve been getting some great ideas from those of you who have added your kits to the Field Radio Kit Gallery.

[By the way, if you’ve submitted your kit to the gallery and haven’t seen it yet, note that I’m posting these in the order received and there are many in the pipeline!]

I’ll likely build my EDC field kit around the Elecraft KX1 or the Mountain Topper MTR-3B, then pair it with a good wire antenna.

My EDC laptop bag: the Tom Bihn Stowaway

But this process got me thinking: if money was no object, and I wanted the most compact and versatile multi-band field kit, what radio and antenna system would I choose?

My answer? A kit built around the Elecraft KX2 and AX1 antenna.

In my experience, the KX2 AX1 combo is hard to beat. It’s compact, effective, low-profile, and you can set it up pretty much anywhere.

Let’s explore my reasoning here keeping in mind–in my world–this is a very deep rabbit hole to go down. I’ll do my best–no promises–to keep this as concise as possible:

Compact, Low-Profile, Self-Supporting, and Simple

Here are all of the components of my typical KX2 AX1 field kit:

This is all that is needed for a field activation.

And if you’re an SSB operator? You don’t really need a microphone because one is built into the KX2 (that said, I’d suggest you build a compact mic if you plan to do a lot of SSB operating).

If I wanted to make this kit even a bit more versatile? I’d add a kneeboard to the list. This gives one the ability to operate without a picnic table.

I recently published a video showing how the KX1 and AX1 can fit on a kneeboard.

Portable and Versatile

What makes this field kit so portable is that the KX2 is one of the most compact general coverage HF transceivers on the market.

It’s certainly the most compact (at time of posting) when you realize that two important components–the battery and ATU–are internal options.

The AX1 antenna is also incredibly compact–it comes apart in such a way that no one component is longer than about 6 inches. What you see in the photo above is the entire radio and antenna system.

Yes: A Compromise

Sure–and let’s get this out of the way right up-front–the AX1 is a compromised antenna, and being a massive fan of simple wire antennas myself, I know a properly deployed wire in a tree is going to provide better gain each and every time.

Also, people who live in more remote parts of the world–say, Hawaii, the Yukon, or Perth, Australia–where the amateur radio density is sparse within their propagation footprint, the AX1 will not be as productive as it is for me here in the eastern half of North America. Continue reading Coffee, QRP, & Question: Is any field kit more portable and versatile that Elecraft’s KX2/AX1 combo? →

New Products, News, Portable, QRP, QRP Radios, SOTA, Videos

Video: Wayne (N6KR) demonstrates the Elecraft KH1 at Pacificon SOTA Luncheon

7 Comments

Many thanks to Rex (KE6MT) who shares the following video made at the at the Pacificon SOTA Luncheon (2023):

Click here to view on YouTube.

Events, Guest Posts, News, Portable, QRP, SOTA

The Arizona 10-Point Madness Summit-to-Summit Event

9 Comments

The Arizona 10-Point Madness Summit-to-Summit Event

by Charlie Brown (NJ7V)

“How can I accumulate a bunch of summit-to-summit points all at once, for Summits on the Air?”  This was a question Pete Scola WA7JTM had been pondering for years.  He initially thought it might be fun to choose several 10-point summits that were near each other, have a person operate on each summit, and then rotate to a new summit every so often.  Eventually, this idea gave way to the Arizona 10-Point Madness Summit to Summit event.  With an invitation from Pete, all willing SOTA participants gathered on a 10-point summit on September 19th, 2018, and 10-Point Madness was born!

The Arizona 10-Point Madness Summit to Summit event is a casual on-air gathering, where Summits on the Air participants set up their ham radio station on the top of summit . . .  at approximately the same time.  Operators are on simultaneously so that there is an overwhelming availability of summit-to-summit contacts to be made.  This event occurs every year on the first Saturday of October.

Fred (N7PN) 2023 10-Point Madness

There was a focus on 2-meter contacts the first year we did this.  We learned quickly during the 2018 inaugural event that it was true madness for 31 ham radio stations to contact 26 nearby summits all at the same time, especially on 2 meters.  We tried alternate 2-meter frequencies and even considered a net control operator.  However, in the end, we learned to just wait patiently for our turn to call for contacts on 2-meters, or if it was extra busy, we just moved off to HF for a while and returned later.  As a courtesy, we now monitor 2 meters and return to it throughout the event to give the operators a chance to come and go.

Adam (K6ARK) 2022 10-Point Madness

That first year was amazing.

We collectively made 1104 contacts, 354 of which were VHF.  And yes, we scored a lot of summit-to-summit points.  We averaged 140 points each, with a grand total of 4324 s2s points for all the Arizona stations.  We announced the event to several online platforms and invited others to participate, and had a few people join us from outside of Arizona. All of them had fun and saw good results as well.

Our 6th annual event concluded a few weeks ago.  Participation has been steady in Arizona but we have seen an increase outside of Arizona.  We had about the same number of Arizona participants as years past, but total contacts increased to 1403.  The average s2s points per participant increased to 169, with a grand total of 4906 s2s points.  I was amazed that Keith KR7RK earned 400 s2s points this year for this event – a new record, I think.  These are only numbers for Arizona participants.

I read on social media that Josh WU7H, who was participating from Washington state, had 55 total s2s contacts and only a fourth of them were from Arizona.  We received some statistics from stations in Georgia, South Carolina, Wisconsin, Texas, Nevada, Washington, Oregon and more.  It is a lot of effort to compile the statistics but it would be interesting to include people outside of Arizona in the future.

Joe (KE9AJ) 2022 10-Point Madness

Here are a few things that have stood out to me over the past 5 years for this event:

In 2019, Josh WU7H and DJ WW7D participated from Washington.  They won the award for most challenging activation in my opinion, operating from a snow packed summit in below freezing temperatures.  But that didn’t deter them!  They continue to come back year after year.  They are tough!

In 2022 my friend Adam K6ARK was participating on a summit in California.  I was able to make a 2-meter CW and SSB contact with him from my summit, 327 miles away.

Several others in Arizona also made contact with him.  While not record breaking, this is long haul for 2-meters.  And this year, I was able to make 19 DX contacts with one summit-to-summit into Germany.  It seems like there are a lot of DX contacts to be made every year, but this was a record for me.

Finally, this year Pete WA7JTM made a contact on every single band from 1296 MHz down to 1.8 MHz.  That’s 16 different bands.  How amazing is that?

The point is, you can make this event into whatever you want.  Experiment and try new things because there are people listening.  And of course, you do get a ton of summit-to-summit points.

WW7D on High Rock 2019 10-Point Madness
Josh WU7H and DJ WW7D operated from High Rock

Dave AE9Q sent an email out to the Arizona participants and inquired about the radios, antennas, and power sources used for the event and as you can probably guess, the list was very diverse.  I’m not exaggerating.  Just about every QRP HF radio, VHF/UHF handheld, Antenna, and power source you can think of was used – Log periodicals, mono-band double-bazookas, double zepps, whips, Yagi’s, end-feds, QRP and QRO HF radios of all types, HT’s with microwave capabilities, mobile vhf radios, amplifiers, lipo and lifepo batteries.  The list is long.

Sandy (W7NRS) 2023 10-Point Madness
Ray (W7USA) 2023 10-Point Madness

We recognize that other SOTA associations do similar events, like the Colorado 14er event and the Pacific Northwest Not Quite Fourteener event, to name a couple.  These are all great opportunities to get on the air and have fun with QRP radio in the field.

I’m sure you have heard about how amazing the SOTA community is.  If you get out on the summits or frequently chase, your call sign becomes familiar to others.  So much so that you feel a personal connection and sense of comradery every time you make contact with them.  During these events you see many of your good on-air radio friends.  It’s like a reunion.

The Arizona SOTA association thanks the many chasers and participants outside of Arizona who make this event more and more exciting every year.  We hope to see even more participate next year.  Just pick a summit, put your alert on the sotawatch.sota.org.uk web page, get on top of the summit and have a blast!

Readers: Do yourself a favor and subscribe to Charlie’s YouTube channel Red Summit RF. It’s chock-full of SOTA radio goodness. I’m also a fan of the All Portable Discussion Zone podcast–subscribe if you haven’t already!

Grab And Go, New Products, News, Portable, QRP, QRP Radios

Introducing the new Elecraft KH1 handheld-portable CW QRP transceiver

74 Comments
WG0AT holding the Elecraft KH1

From Elecraft:  something BIG, in an incredibly small package…!

Just this morning, Elecraft introduced the new Elecraft KH1.

In brief, the KH1 is a five-band (40, 30, 20, 17, and 15 meter) handheld QRP CW transceiver with options for an internal battery, internal ATU, whip antenna, and fold-out logging pad.

Exciting!  And if you’d like to get the scoop on this new handheld radio–– along with photos––we’ve got it here.

Q: What is the Elecraft KH1?

WG0AT with the KH1 making contacts pedestrian mobile.

A:  The Elecraft KH1 is a compact, five-band CW QRP transceiver designed for both handheld and tabletop operation. Indeed, the “H” in the model number signifies “Handheld.”

To be clear, although it is quite small, the KH1 isn’t just a tiny radio:  it’s ergonomically purpose-designed, to be a pedestrian-mobile CW station.  It’s lightweight, easy to hold and use, and will fit both right and left-handed operators. With the optional “Edgewood Package,” it also includes a fold-out logging pad.

Q: How much does the Elecraft KH1 weigh?

A: With all options (ATU, Antenna, Battery, and logging pad) the KH1 weighs in at a featherweight 13 oz.

Q: What features does the Elecraft KH1 offer?

A:  Here’s a feature list from the Elecraft brochure:

KH1 features:

  • 40-15 meter ham bands
  • 6-22 MHz for shortwave broadcast band listening
  • CW mode; 5 watts, all bands
  • ATU includes whip & high-Q inductor for 20/17/15 m
  • 2.5 AH Li-Ion battery & internal charger
  • CW decode & 32K TX log
  • Scan/mini-pan feature
  • RTC [Real-Time Clock]
  • Full remote control
  • Speaker
  • RIT, XIT, & VFO lock
  • Light gray case stays cool even in bright sunlight
  • Three CW message memories with chain and repeat functions

Like nothing else on the market…

The KH1 design is all Elecraft and built on several years worth of design iterations. It is, no doubt, fueled by Wayne’s passion for handheld portable HF.

Again, the KH1 focuses on ergonomics that would make handheld operation not only easy, but enjoyable.

The two main multi-function controls (the AF Gain and Encoder), for example, are located on the bottom of the radio. This gives the operator easy and ergonomic access to the controls while the radio is in-hand.

The four buttons on the top of the radio default to the most useful functions one would need while operating portable. Using them to dig deeper into the menu levels, however, is also intuitive and well thought-through.

While the KH1 menus and features are naturally not as deep as those of the KX2 and KX3, it’s impressively well-equipped for a radio this size. At the end of the day, it’s a much more simple field radio––by design––than its KX2 and KX3 predecessors. If anything, it’s more akin to the venerable KX1!

(Source: Elecraft)

The KH1’s paddles (KHPD1) are located at the bottom of the radio––they flip down for transport, and up during use, so your fingers are well away from the AF and Encoder knobs.

The KH1 has an optional internal ATU that is not as wide-range as that of the KX3, KX2, or T1, but is much better than that of the KX1. I understand that it’ll match most of what you throw at it.

Wayne told me that one of the most complicated parts of the KH1 design was the fold-out logging pad. He wanted the logging pad to be functional for one-handed operation. The indents around the loose-leaf logging sheets allow you to pull out a completed sheet and slip it behind the others in the stack.

The logging sheets are available as a PDF download; simply print and cut. No doubt, the format would be easy to modify.

Whipped!

This is the part I love: the KH1 is designed to operate with a telescoping whip antenna.

Basically, you unclip the whip from the side of the radio (assuming you have the ATU/whip option) and screw it on the top of the top. The ATU will match the whip antenna––there’s a mechanical slide switch that selects 15/17 m or 20 m high-Q inductance for whip––or an external antenna on the BNC port.

If you’ve been reading my field reports and watching my videos, you know I’m a huge fan of the Elecraft AX1 antenna. The KH1 basically has the option of a built-in AX1 antenna…Just take my money!

Speed…and stealth

If the counterpoise is already attached and wrapped around the body of the KH1, you will be able to deploy the station and be on the air in about 20 seconds.

As many of you know, I’ve always said that the secret power of the AX1 and AX2 antennas is speed of deployment. The KH1 allows for an even speedier deployment.

This will be most especially appreciated when activating summits in the winter where exposure to the elements from simply setting up the antenna and station will often make your hands go numb.

Also, the KH1 is so low-impact and low-profile, you’ll be able to activate parks that might otherwise be off limits to an HF field installation. I know of one urban park that, with permission, I’ll definitely use the KH1 to activate; it has no park benches and no trees, just a strip of grass around a historic building in the middle of a city. Perfect for the KH1!

KH1 versus KX2?

The KH1 and KX2 are very different animals. Elecraft actually produced this comparison chart to help potential customers make a purchase decision.

KX2 & KH1 Comparison Chart (PDF)

My advice? If you have a KX2 on order, don’t cancel it.

The KH1 is not a KX2 replacement. The KX2 is a much more capable radio. The KH1, however, is a radio focused on ultra lightweight, low-profile, pedestrian-portable, CW HF field operation.

A KH1 review?

Yes, it’s coming! I will purchase and review the KH1 “Edgewood” package. My unit should ship next week, so look for updates and photos, and I will push those field reports and videos to the front of the line.

To be completely transparent:  I have been in a volunteer group of testers for the KH1. Other than this, the only real affiliation I have with Elecraft––besides knowing Wayne, Eric, and some of their staff––is being a long-time customer. I own, or have owned, every radio they’ve ever made, save the K3 and K4 lines. And it’s Elecraft that makes my favorite field radios.

Product Brochure

Click here to download the KH1 product brochure.

Pricing & Availability

As with all Elecraft products, you’ve many options in terms of pricing.

Basic KH1 ($549.95 US):  Including the KH1, power cable, USB cable, manual

KH1 Edgewood Package ($1,099.95): Includes all BASIC KH1 items, plus all options (KHATU1 Antenna Tuner, KHPD1 Keyer Paddle, KHLOG1 Logbook Tray w/mini-ballpoint pen, KXBT2 rechargeable Li-Ion battery, KHIBC1 Internal Battery Charger,  and ES20 Custom zippered carrying case)

Click here to view the Elecraft KH1 on the Elecraft website.

Field Radio Kits, News, Portable, QRP

Field Radio Kit Gallery: K6ARK’s Ultra Lightweight QRP Field Kit

12 Comments

Many thanks to Adam (K6ARK) who shares the following article about his portable field radio kit which will be featured on our Field Kit Gallery page. If you would like to share your field kit with the QRPer community, check out this post.

by Adam (K6ARK)

To me, the pinnacle of portable amateur radio involves Summits On The Air (SOTA) activations in particularly remote and hard-to-reach areas.  Many require long approaches, difficult climbs, and high-altitude travel to get there, so minimizing the size and weight of my portable radio kit is of utmost importance.  To that end, I’ve managed to refine my smallest fully functional kit down to quite a compact and light-weight package.

An MTR2B which operates on 20 m and 40 m.  It has been repackaged into a custom-designed 3d printed case is the core of the system.  It has been repackaged into a 3d printed case which cuts the weight of the radio by about 60% from the original aluminum and steel case, and shrinks it in thickness by about 50%.

The key is built-in to the rig – a capacitive touch design I adapted from the M0UKD design.

Brass cap nuts installed on the corner of the case provide the capacitive sense touch points for the left and right paddles.

A 9v form-factor rechargeable lithium-ion battery with a USB-C charge port powers the system.  The lower voltage reduces my transmit power to 2.5 or 3 watts, but also provides a bit more protection for the final amplifier transistors when my antenna setup is less than ideal.  It has sufficient capacity to run this power-efficient little rig for a few hours from a summit.

The antenna is a 40m End Fed Half-wave with a matching unit built from an FT50-43 size toroid directly onto an RCA connector and protected with heat shrink tubing.  28 ga PTFE insulated stranded copper wire forms the radiating element, and it’s stored on a down-sized 3d printed winder of my own design.

The primary components of the kit weigh in at just 4.8 oz (136 g), and the padded camera case adds another 1.8 oz (51 g).   Although the case isn’t particularly light, it provides excellent protection to the rig.

And because most of the summits I bring this rig to are void of trees, a compact telescopic pole is an essential addition.  The one I typically bring packs small and weighs in at just 5.5 oz (156 g) but provides about 10 ft of elevation above the ground.  The cap is leashed so I can’t lose it, and the tube is coated in heat shrink for protection when I cram it into the rocks for support.

In the end, it’s quite a capable kit for just 12.1 oz (343 g) of pack weight.

Check out my ‘Sierra Solitude’ video series as a prime example of a trip where this setup is perfect for my needs.

73 DE K6ARK

Readers, do yourself a favor and bookmark Adam’s YouTube channel which is chock-full of SOTA and ultralight radio goodness!

Field Reports, Morse Code, News, Portable, POTA, QRP

The prettiest activation ever – Spray Valley Provincial Park

4 Comments

As always there are lots of links within the article. Click one! Click them all! Learn all the things! ?

Ahhh .. few things in life compare to the view one sees while lakeside in the mountains. The flat water is a stark contrast to the towering mountains nearby. There is at least a 4000′ difference in height between the two at my destination in this story. For me, nothing so succinctly tells me where I fit in the world as when I stand among these giants.

So It was with that big goal in mind that a drive through the mountains of Alberta’s Kananaskis Country region was called for. The drive would take me through sweeping vistas, over high mountain road passes, along nearly 100km of gravel roads in no-cell-service backcountry while racking up nearly 400km of travel in one day.

Along the way I activated two never-before done parks in the POTA system and scouted out one more to be done at a future date. This is the story of the lakeside activation… but first, watch the short video to understand why I’m gushing on the beauty of this particular spot and written this atypical (for me) article about the activation itself.

The Drive to the activation

Overview of the trip. Darker lines indicate gravel roads. First activation is along the westernmost gravel road along the lakeshore.

For those of you that want to replicate this trip, here’s the route I took shown on the map above.

From just before when I turned north off Highway 541 to Highway 40, and until I reached Canmore, there is zero cell service. Same again turning onto Highway 68 from 40 until Bragg Creek.

Alberta has much backcountry that is well beyond cellular range. Working at The Candy Store(tm) as I do, I have access to items like the Zoleo Satellite Communicator to give me text messaging and SOS capabilities should I need them. Before I discovered SOTAmat, I used the Zoleo for all of my spotting in backcountry.

Continue reading The prettiest activation ever – Spray Valley Provincial Park →