Well, to be honest, it was a purchase I planned to make, but not until much later this year or early next year.
Except I didn’t.
Don’t judge me.
Confession time
Last Sunday, I hopped over to the QTH.com Classifieds to price out a nice 100 watt radio for a friend whose daughter is new to the hobby.
Normally, I use the search functionality at QTH.com and seek out classified ads for particular radio models. Since I wanted to offer him several examples, I decided to simply load all ads for that day and skim through the list.
The very first item that came up on the list was a Yaesu FT-817ND. I opened the ad and looked at the photo.
The owner was selling the radio along with everything that originally accompanied it–the box, antenna, manuals, the whole lot–plus side rails he’d purchased and installed. He described it as “like new” with only five hours of operating time on it. He said he was selling it because, “I just can’t do QRP.”
The price was $350 shipped.
I bought it.
My justification
If you’ve been following this blog for long, you might recall that it was only last year when I purchased an FT-817ND from my buddy Don. I did this after realizing I missed the FT-817 I originally owned shortly after it was introduced to the market in 2001. It didn’t help that I really wanted to build and try the FT-817 Buddy Board by Andy (G7UHN). [Andy: V4 is next on my bench..I promise!]
I honestly think I appreciate the FT-817/818 now even more than I did after it initially hit the market. I’ve been enjoying the FT-817ND in the field and have used it in a number of park and summit activations.
A recent activation at Island Mountain Educational State Forest with the ‘817ND
But that’s not why I purchased this one.
I’ve been wanting to get in on a bit of satellite action as, perhaps, a bit of a stepping stone into QRP EME (I mean, the antennas point upwards, right?) and also my ham daughters are both interested in satellites.
My future QRP full-duplex portable satellite system
Ages ago, I’d seen and read about hams who’d paired two FT-817s or FT-818s to create a full duplex portable satellite station.
My buddy Eric (WD8RIF) reminded me about this earlier in the year, too, and it stuck in my head because I really liked the idea.
Why? Besides all of the advantages of using a full duplex station, two FT-817s is still a very portable set-up. Hypothetically, I could use it for both satellites and HF during a park activation. Plus, two portable HF radios, right? Right! What’s not to love–?
Seriously: I see the system as quite a value when compared to other full duplex systems including pricier HTs.
As described
I had not done research about FT-817ND pricing before pulling the trigger–indeed, I still haven’t–but I felt $350 shipped was fair. I know I’ll get $350 of fun out of it!
After taking delivery and unboxing it, I expected it to show normal signs of wear, but the seller described it accurately: it was like new. In fact, it still had the protective film on the screen (yes, I pulled it off) and I could tell the microphone had never even been taken from the box. It was flawless and included every single original accessory mostly in the original bags.
I like the side rails, too: They prop up the radio at a perfect viewing angle. I have no idea who made these, but they’re nice.
Speaking of side rails…
Dual Escort?
I’ve been very pleased with the Portable Zero side rails and bail that came with my first Yaesu FT-817ND.
Using a dual FT-817ND system in the field, though, I’ll require either a bag to hold them, or a dual side rail system.
Turns out, Portable Zero makes side rails that hold and space two FT-817/818s perfectly. I gulped a bit when I saw the price, though.
Still: they obviously make a great product and, for me, it’s an elegant solution. Before I bite the bullet, though, I might investigate homebrewing something or see if there are other options.
In fact, if you’ve seen other solutions–or have owned the Dual Escort yourself–please comment!
Or an affordable carry bag?
W9WSW’s Satellite Gear in this Amazon Basics DSLR bag (Photo swiped from W9WSW’s excellent site)
The bag would allow me to house both transceivers, a battery, cables, digital recorder and basically everything I’d need to operate full duplex portable in the field.
Another advantage of using the bag would be that I wouldn’t need to remove the side rails I already have on each FT-817ND (assuming the camera bag could accommodate them). In addition, the bag might make for less dangling cables as I operate.
The fact that numerous satellite gurus like Sean (KX9X) use this same bag is a pretty strong recommendation.
Arrow heading my way
On the advice of Eric, and numerous other portable satellite ops, I ordered an Arrow 146/437-10BP Satellite Antenna.
I assume I’ll use the the BNC connectors on the front of the radio rather than the SO-239 connectors on the back.
SSB filtered!
The FT-817ND I purchased last year came with a 2kHz Inrad SSB filter. I replaced it with a 500 Hz Collins filter I purchased from Steve (WG0AT)–thanks, Steve!
I opened the new FT-817ND yesterday morning and installed the SSB filter. It sounds great.
If I chased you in POTA or SOTA yesterday, and you logged me, it was with the new FT-817ND running 2.5 watts off of the included NiMH battery pack.
I gave the FT-817ND a thorough work-out and it seems everything functions as it should.
Any other dual FT-817/818 owners out there?
If you have any advice about mounting or packing dual FT-817/818s, I’m all ears. Also, if you use the FT-817/818 with an Arrow antenna, I’m curious what you use in terms of cable assemblies.
I’m a complete newbie to the world of amateur satellites, so any tips or hints are most welcome.
This weekend, I’m going to the first hamfest I’ve attended in 19 months. Let’s hope I can resist other impulse purchases! For what it’s worth, I’ve zero buyer’s remorse about this purchase!
In 2020, I easily spent a total of 100 hours outdoors with my radios activating a total of 82 sites for the Parks On The Air (POTA) program alone. This doesn’t include hours and hours of SWLing (shortwave radio listening). It’s been great.
Taking radios into the field is so much easier to do today than it was in, say, 1985 or earlier, because we have so many more options for powering our gear in the field. Not only have radios become more efficient in operating off of battery power, but we now have so many affordable and lightweight rechargeable battery choices on the market.
In the following article, let’s take a look at some portable battery power options for your radio gear. By “portable,” I’m talking power options for those of us who load a backpack or carry case and head to the field.
To keep the scope of this article in check, I’m also going to focus only on rechargeable battery options. And rather than get bogged down in the nuances of battery chemistries, we’ll focus on the end result––the pros and cons of each battery type, and how practical they might be for your field application.
In addition, I’ll also limit discussion to batteries that can be purchased of-the-shelf rather than addressing homebrew options. While I love building things, I’m very cautious when dealing with battery charging because if not done correctly, the results can be dangerous. I prefer obtaining products from trusted suppliers who thoroughly engineer and test their equipment.
Let’s take a look at several types of batteries, and speak to their advantages…as well as disadvantages. Then––as we summarize our findings––let’s discuss how to choose the right option for your needs.
Consumer-grade rechargeable batteries
Let’s begin by talking about the lowest-hanging fruit in terms of portable power: everyday rechargeables in the form of 9V, AA, AAA, C, and D cells.
While, admittedly, these batteries are not typically an option because of their limited capacity and energy density, they can still be a very practical power source for portable receivers and even a few QRP transceivers.
Rechargeable battery chemistries have improved with time, thus I no longer purchase nickel-cadmium (Ni-Cd or NiCad) or legacy nickel metal hydride (NiMH or Ni–MH) batteries.
These days I almost exclusively purchase low-self-discharge nickel metal hydride (LSD NiMH) batteries, specifically, Panasonic Eneloop batteries (Amazon affiliate link). Although they’re a pricey option compared with generic NiMH batteries, and might even be overkill for certain applications, I do love the shelf life of Eneloops.
Of course, the benefit here is Eneloops have that low self-discharge. They will maintain charge better at rest (i.e., when not in use) than legacy NiMH or NiCad batteries. From my real-word usage, I’m convinced that Eneloops also demonstrate better longevity over numerous charge/discharge cycles than many others.
All of my portable shortwave receivers that accept AA or AAA batteries are powered by Eneloops exclusively.
And although I’ve never done this myself, it is also possible to power highly-efficient QRP transceivers with Eneloop batteries, so long as you use a multiple battery holder to increase voltage and capacity to match both your rig and your desired amount of operating time.
WD8RIF’s AA battery holder
Keep in mind, though, that most transceivers will require a block of at least ten AA batteries to reach a voltage around 12 VDC. As you might imagine, it can be cumbersome after using your radio in the field to remove all ten of these batteries and charge them in a charger that can only hold, say, four batteries at a time. I personally prefer other options, but this one is certainly a fairly affordable, safe, and accessible option.
Note that in recent years, Panasonic started offering Eneloop Pros: while pricier than standard Eneloop batteries, they offer slightly higher capacity at the expense of overall longevity (roughly 500 versus 2100 total charge/discharge cycles). Since the voltage is the same, I’ve never felt the need to use higher-capacity Eneloop Pros.
Rechargeable Panasonic Eneloop AA batteries (non-Pro version):
Price: $2.25 – $4 US per battery, depending on the number in the package
Weight: 4 grams/.4 ounces per cell
Voltage: 1.2 V each
Longevity: Excellent, up to 2100 charge/discharge cycles
Ease of recharging: Simple via Eneloop OEM chargers
Solar- charging option: Eneloop originally marketed solar chargers, but doesn’t seem to do so presently
Sealed Lead Acid (SLA) Batteries
When I first became a licensed ham radio operator in the late 1990s, sealed lead acid batteries were the primary battery power source used for field radio operation.
At the time, these batteries were one of the best options for portable radio use because they could be purchased in a variety of sizes (based on amp hour capacity), and unlike flooded lead acid batteries, they required no maintenance––and being sealed, did not outgas.
While I’ve owned everything from 3 Ah to 15 Ah SLA batteries, I found the once-ubiquitous 7-8 Ah size to be the “sweet spot” in terms of portability and capacity.
SLA batteries are still among the most accessible high-capacity batteries on the planet. No matter where you travel, it’s likely you’ll be able to hunt them down in any hardware or electronics store. Our small local hardware store has a wide selection of these at their battery kiosk.
What are some of the pros of these batteries? In terms of “bang for buck,” the SLA is still hard to beat. You can purchase a quality 7.2 Ah 12-volt SLA battery for about $18-20 US (affiliate link). This would be more than enough battery to power a typical QRP transceiver for many hours on end. Chargers are also inexpensive––you can purchase a dedicated charger for about $10-15 US. Not bad.
In addition, 12-volt batteries are nearly ideal for amateur radio use since most transceivers are designed to operate with 12-13.8 volts DC +/- a modest margin.
There are some negatives compared with more modern battery chemistries, however. For one, SLA batteries are much heavier than the batteries we’ll discuss in the following sections. After all, they’re (still) made of lead! In addition, the battery’s longevity will be negatively impacted if you discharge it too deeply.
With that said, if you take care of an SLA battery, it can give you five or more years of service life in the field, yielding an excellent value for the modest investment. If you have an application that requires relatively little capacity from the battery, you might get a very long service life, indeed. In 2011, I built a remote antenna tuner box around an LDG Z11 Pro ATU and a discarded 7Ah 12V SLA battery. At the time, this battery could no longer hold voltage long enough to be reliable in the field, but I knew the Z11 Pro requires very little in the way of power, so I thought I’d try it as a power source anyway. Since the remote ATU box isn’t near an outlet, I charge the SLA battery with a 5-watt solar panel I purchased used at a hamfest with a Micro M+ charge controller. A decade has now passed, and that SLA battery continues to power the Z11 Pro even through seasonal temperature variances of -10F/-23C to 90F/32C. Not bad! Again, keep in mind this application works because the Z11 Pro is so flexible in terms of power requirements––it’ll operate on 6-16 volts DC at 300 mA with a 20 uA standby current.
Clearly, SLA batteries are affordable candidates for back-up power in the shack during occasional power outages.
Price: Most affordable option per Ah of the batteries listed here
Weight: By far, the heaviest of all the battery options in this article
Voltage: Various, but 12VDC is very common
Longevity: Very good if properly maintained
Ease of recharging: Easy, via simple charge controllers
Solar charging option: Multiple types of charge controllers can be used with SLA batteries; among the listed batteries, the easiest and least expensive to charge via solar
Lithium-Ion (Li-ion)
Without a doubt, lithium-ion batteries have revolutionized the consumer electronics world.
Why are they so popular?
First of all, their construction allows for a variety of form factors ranging from cylindrical cells to slim packs and pouches so thin they can fit in an ultra-thin mobile phone, eReader, or tablet. They’re the easiest type of battery to accommodate in compact consumer electronics, and indeed, they power most of the consumer electronics we’ve put to use in the last decade.
Secondly, they have a very high energy density, thus pack a lot of capacity for the size and weight. Indeed, if size and weight are your primary requirements, li-ion batteries should be high on your list.
In addition, Li-ion batteries are ubiquitous and affordable because they’re used in so very many applications.
There are negatives, though, with these power sources. First and foremost, they’re very sensitive to over-voltage and over-current events that initiate a thermal runaway. To prove this point, I’ll share some first-hand experience from the early days of large lithium-ion packs…
Li-ion Horror Story
In 2011, I evaluated a lithium-ion battery pack with integrated 5V USB chargers and even a simple one-outlet inverter from one of the big names in portable power systems. At the time, this was a new battery pack and a relatively new technology, at least in terms of the energy density and compact size. After receiving the battery, I charged and discharged it perhaps twice during testing. I had a flight scheduled from North Carolina to California, and decided I’d take it in my carry-on bag to power my laptop in flight. It worked fine on the flight to KSFO. Once there, I recharged it. On my return flight, it simply didn’t work. I thought perhaps I hadn’t plugged it in properly, or that the hotel outlet I used didn’t work. Upon arrival I emptied my travel pack onto the bed and plugged in the battery pack; it indicated it was taking a charge.
After doing a few projects around the house, I went back up to the bedroom and was greeted with an overpowering smell––almost like the pungent chemical odor of nail polish remover. I looked everywhere for the source of the odd smell. Finally, I located it: it seemed to be coming from the battery pack. Upon examination, I could tell the battery had begun to swell. As I lifted it up, I noticed that the bottom portion was essentially in a state of melting. As quickly as I could, I unplugged it and removed it from the room. I then discovered that in the thermal runaway process, it had begun burning through the sheets and mattress of the bed. Shocked, I suddenly realized it could have burned down my home.
Keep in mind, I was completely new to this battery technology, and this was years before thermal runaways made the news and airlines began restricting their transport. To my relief, the company from which I purchased the pack ended up pulling that model off the market, and even reimbursed me for the mattress and bedding. But it was a hard lesson learned.
If I’m being perfectly honest, this lesson had a major impact on my willingness to experiment with Li-ion battery packs.
The problem with the model of pack I had purchased was not the battery chemistry or construction, per se, but the charge controller). The fact is, Li-ion batteries require millivolt accuracy and a number of protections to detect and stop thermal runaway. Battery packs with multiple cells need a battery management system (BMS) that also balances the cells and monitors them closely. Fortunately, most manufacturers of the technology now understand this.
Modern Li-ion cells and chargers are much safer and more stable
Since then, Li-ion battery chargers have become both orders of magnitude safer and more effective. Still, I only charge these batteries on a surface which, should the battery be tempted to melt down, would be less likely to be damaged or serve as a fire hazard. I also never leave them unattended during charging.
With that said, I don’t think Li-ion batteries are to be feared. Obviously, many of us walk around with one tucked in our pocket all day––in our smartphones! They’re generally considered very safe now. Of course, I’d only buy the best and would steer away from the lowest-costs units you might find on eBay and Aliexpress, as many of these products are made in places with little oversight or regulation.
Another interesting fact about Li-ion battery packs is that since their voltages are usually available in multiples of approximately 3.6 volts (e.g., 3.6, 7.2, 10.8, 14.4 and 18 volts), they are not always ideally suited for radios that require 13.8V input power. Some packs, however, have circuitry that provides an output voltage closer to your desired amount.
One Lithium-ion battery pack I’ve been using with my Mountain Topper MTR-3B, Elecraft KX2 and KX3 transceivers is a (very affordable) TalentCell rechargeable 3000 mAh Li-ion battery pack that provides both 12V and 5V USB power. It has built-in charging circuitry and is very compact. I purchased mine for about $25 on Amazon.com, and have been very pleased with it so far.
Summits On The Air operators often place priority on smaller-sized and lighter-weight power sources, and thus turn to Li-ion battery packs. Many SOTA friends have invested in high-quality balance charger/dischargers to maximize the life of their batteries, and have been happy with the performance they receive. A quality charger may costs upwards of $60, but is worth the investment if you choose Li-ion batteries as your portable power of choice.
Price: From affordable to pricey, depending on capacity and charger investment
Weight: The lightest weight portable battery options in this list
Voltage: Often in multiples of approximately 3.6 volts: (3.6, 7.2, 10.8, 14.4 and 18VDC)
Longevity: Good. Typically around 400-500 charge cycles if properly maintained
Ease of recharging: Simple, if a self-contained pack; more complex, if using multiple cells that need balancing
Solar charging option: Not advised (yet). There are a number of homebrew Li-ion solar charging projects on the web, but I believe this battery chemistry fares better with a balance charger connected to a stable AC power supply.
Lithium Iron Phosphate (LiFePo4/LFP)
I typically use my 15 Ah LiFePo4 battery pack when powering transceivers like the Mission RGO One that can push 55 watts of output power. I also use this battery to power my Elecraft KXPA100 amplifier on Field Day.
The final type of battery chemistry we’ll cover here is my favorite of the bunch.
There are good reasons why Lithium Iron Phosphate batteries have become one of the choice rechargeable batteries for field radio use.
LiFePo batteries are inherently stable and safe
They offer a longer cycle life than that of other Li-ion, NiMH, NiCad, or Lead Acid batteries–thousands of charge cycles as opposed to hundreds
LiFePO batteries have an excellent constant discharge voltage
LiFePo batteries use phosphates––as opposed to cobalt or nickel, which are supply-constrained and carry heavier environmental concerns
LiFePo batteries have a lower self-discharge
LiFePo batteries are very lightweight compared to SLA batteries
3.2 V nominal output voltage means that four cells can be placed in series for a nominal voltage of 12.8 V, near ideal for most field radio gear
Any cons? Yes…while they’re lightweight, LiFePo4 batteries aren’t as compact as Li-ion battery packs. But the primary negative here is the price. At time of print, LiFePo4 batteries have the highest cost per Amp hour of the batteries discussed in this article. With that said, due to the excellent longevity of these batteries, the LiFePo may be the most cost effective option in the long term.
LiFePo4 battery systems sport built-in battery protection modules to address concerns like over-voltage and balancing.
How do LiFePo batteries stack up?
Price: One of the pricier options, when you include the battery and charger
Weight: Very light weight, but size tends to be larger than comparable Li-ion packs
Voltage: Excellent match for gear requiring 12V – 13.8 VDC
Longevity: Excellent. Thousands of charge/discharge cycles
Ease of recharging: Simple, using the provided charger (battery packs have a built-in charge controller)
Solar charging option: Bioenno sells charge controllers designed to work with LiFePo batteries, handy for the field
Without a doubt, the best-known LiFePo battery manufacturer in the world of ham radio is Bioenno Power. I’ve purchased their batteries exclusively and have been incredibly pleased with the quality, longevity, and performance of their products.
Choosing the right battery for you
Each one of these battery types have their pros and cons, and you can find lengthy, in-depth discussions online about the nuances of each battery chemistry. At the end of the day, however, what matters is which one best suits your particular application and provides your gear with the appropriate amount of voltage.
Here’s when I would reach for each of our types of batteries…
NiMH LSD AA batteries
WD8RIF uses Eneloop rechargeable AA batteries with his Elecraft KX3 field kit (Photo: WD8RIF)
If you’re willing to use a battery pack to run 8-12 cells in series to achieve your required nominal output voltage, Eneloop batteries are relatively affordable, lightweight, and of course, power an array of electronic devices in our world.
Of course, AA Eneloop batteries are also invaluable for those of us who have an arsenal of portable shortwave radios that accept AA cells!
Sealed Lead Acid Batteries
If you’re on a very tight budget and weight is less of a concern, SLA batteries are a great choice. They’re an especially affordable option if you plan to make a solar-powered battery pack since charge controllers are quite simple and affordable.
If you’re looking for a stationary back-up battery for home, these are an excellent choice, as long as you keep the charge topped up.
Li-ion Batteries
Backpacking or flying overseas, and size and weight really do matter? Purchase a Li-ion battery system. Li-ion cells and packs offer the highest energy density of any of the battery chemistries in this list. They’re incredibly compact––and as long as you use a quality charge controller with built-in protections, and you don’t damage or puncture an actual Li-ion pack––they should be quite safe, and you’ll be pleased with performance. Note: Keep in mind some airlines have regulations about the size of Li-ion battery pack you’ll be allowed to carry on board, so do check before departure.
LiFePo Batteries
The 9V 3Ah Bioenno LiFEPo4 pack is very compact and pairs beautifully with the Mountain Topper MTR-3B as this particular transceiver prefers voltages at 12 volts and below.
If you’re looking for a simple, effective portable battery solution that is almost custom-designed to power radio gear, invest in a LiFePo4 battery and charger. I have everything from a 15 Ah 12V LiFePo4 battery that can power my 50 watt Mission RGO One transceiver, to a 3 Ah 12V pack I now use for 2-3 hours in the field at a time with my QRP transceivers. Bioenno has recently sent me a 9 V 3 Ah battery pack to test with my Mountain Topper MTR-3B––it’s incredibly compact, since it only needs three 3.2V cells in series. LiFePo batteries are also the ones I suggest for those who are new to the world of battery packs and want something that is hassle-free and simply performs.
I admit, I’m being transparent here about why I own a total of three LiFePo4 batteries from Bioenno Energy––they’re amazing and I know I can rely on them.
In summary…
…I would offer this final piece of battery-usage advice: whatever you do, don’t “cheap out” on your battery and charging system. No matter what chemistry you decide to purchase, buy the best quality you can afford. If using any variant of a Li-ion battery, heed my tale, and be sure any separate charge controllers you employ will protect your battery (and your home)!
And now…Go out there and have fun. I assure you: when you take your radios––whether portable shortwave radios or ham radio transceivers––to the field, you’ll find you can escape all of the noises that so often plague us indoors. And out there, you, too, may find your radio bliss.
To quote the W4C association manager Pat, KI4SVM, “Anderson is a drive-up with no other redeeming qualities.” This perfectly describes the mountain. It is easy to get to, at the top of Tower Road, right off of Route 16. The road to the top get a bit rough in places, but is passable in any car.
He had me at “no other redeeming qualities”–!
I must admit that all of the summits I’ve activated so far have been pretty amazing: offering up spectacular views, wildlife, and wonderful hiking opportunities. All of them were also on protected public lands like state/national/county parks.
Anderson Mountain (W4C/WP-012)
Earlier this year, I made a spreadsheet of summits I planned to activate. Anderson Mountain was one of them because of its convenient location in my travels to visit family each week. I had also been saving it for the day that I planned to activate a nearby park–Tuesday, July 6, 2021 was that day!
The mountain is directly off of US 16–the main highway between Newton/Conover and Charlotte.
You turn off of the highway onto a dead end road that leads to the summit. About halfway up, it turns into a single lane privately-maintained road that, as AA6XA noted above, is rough but passable in any car (well, save a Lamborghini but I’m guessing most SOTA ops don’t own one of those!).
The road to the summit is a straight–there’re no confusing forks in the road and it’s impossible to get lost.
Once on top, you’re greeted by a few clusters of communications towers. This is actually pretty common sight with smaller one point summits because they typically have superb line-of-sight to populated areas and are easily accessible by vehicle.
When you look around, you can understand why Pat would say it has no redeeming qualities: towers, rusty transmitter buildings, razor wire on chain link fences, and litter all over the place.
Not the sort of spot that would inspire Ansel Adams.
Judgement call
It’s worth noting here that, unlike POTA, you’re not allowed to operate from a vehicle during a SOTA activation–even at a “drive-up” summit. There’s no such thing as a mobile SOTA activation.
Indeed, you’re not supposed to operate in “the vicinity” of your vehicle either (although, there’s no distance noted and I’m guessing this is on purpose to allow leeway and the op to make a judgement call).
I set up in a little island of trees in the middle of a road loop on the summit. While I wouldn’t call it a hike, I did walk the entire summit after arriving to check for other operating spots, but decided to set up near where I parked the car. In fact, it’s really the only safe spot I noted in the activation zone to park since the road is single lane and you would otherwise block access to one of the transmitter sites. I thought about parking further down the road next to one of the transmitter fences, but I felt like that would have been on private property.
Side note: SOTA forbids operators from trespassing on private property without the owner’s permission. I checked the road very carefully for “no trespassing” signs, but the only ones I found were to keep people out of and away from the fenced-in transmitter sites.
I also thought about trying to operate in a spot on that little island where I couldn’t see my car as easily in the cluster of trees–to remove myself from the “vicinity” of the car–but that would have been awkward, too and only separated me an additional 10-15 meters or so. I chose the option where others could see me and I could see them if, for example, a Duke Energy service vehicle approached.
I was fully outside of my car, though, and not using it to support my antenna or any equipment–another important factor.
Sometimes as an operator you have to make a judgement call when you arrive at a site to stay within the rules and the spirit of the program. I’ve never had a SOTA or POTA activation where I felt I was splitting hairs until this one. I decided that this was the best scenario to activate Anderson Mountain in a way that wouldn’t inconvenience other property owners, nor cause suspicion that might lead to a future no trespassing sign on the road. It was the safest set up and I’m willing to bet most previous activators did exactly the same thing. I felt it was within the spirit of the program.
Since I used the speaker wire antenna at Mountain Island, I used it on Anderson Mountain as well. I deployed the entire station within 5 minutes max: herein lies the advantage of using an arborist throw line, a shack-in-a-box transceiver like the KX2, and a simple wire antenna.
I first hopped on 20 meters CW, spotted myself to the SOTA network (mobile phone reception was superb, by the way) and started calling CQ SOTA.
Within three minutes I logged K6YK, KT5X, W5GDW, and K0LAF which already validated this SOTA activation.
Wow–validating this activation was, as my daughters used to say, “easy peasy lemon squeezy.” 🙂
I added WB6POT and N0RZ for a total of six stations on 20 meters within five minutes.
I then moved to 40 meters SSB and worked K8RAT, W4NA, and WN4AT all within about three minutes.
Finally, I moved up to the 17 meter band and worked F4WBN (our well-known French SOTA chaser) and K2LT.
Packing up my gear was as quick as setting it up.
Video
I did make one of my real-time, real-life videos of the entire Anderson Mountain activation with no edits. If you need a cure for insomnia, I encourage you to watch or listen to it:
At least one redeeming quality…
I mention in the video that some readers and subscribers have confessed that they feel SOTA is less accessible to them than POTA or WWFF. I would have to agree that summit activations are much less accessible than park activations.
For one thing, there are flat regions on our planet that lack prominences that qualify for the SOTA program. If you live in the middle of a prairie state, you may have to drive a great distance to reach the closest qualifying summit (although you might have a number of POTA and WWFF parks nearby).
In addition, summit activating generally involves hiking–which is actually the motivating factor for many of us (certainly for me as I love hiking).
Some would-be SOTA activators have mobility issues, however, and simply can’t hike great distances with gear on their backs.
This is where “drive-up” summits like Anderson Mountain come in: they’re much more accessible for those with health considerations.
If you live in an area with SOTA summits, but haven’t attempted an activation because you can’t do strenuous hikes, connect with local SOTA activators and ask for a list of “drive-up” summits. There are many of these around–some, like Anderson, are accessible because there are radio towers on top, other are accessible because they’re on a park with accessible vistas, or some are even in a mountaintop neighborhood.
Thank you
I’d like to thank all of you for reading this field report and I’d especially like to thank those of you who contribute to QRPer.com via Patreon and our Coffee Fund. While my content will always be free and QRPer is very much a labor of love, your support helps me purchase gear and supports my radio travels. With that said, if you’re saving up for your first radio or need to invest in your own kit, I’d rather you support yourself!
My goal with QRPer is to champion field radio operations and encourage others to discover the benefits of playing radio outdoors!
When it comes to parks, I haven’t picked up many new-to-me “uniques” lately.
In truth, though, I’ve put more effort into activating unique summits which takes more time to plan, plot, and activate. SOTA has taken a bite out of my park uniques, but I’m good with that because to me it’s less about my park/summit numbers and more about the exploration and outdoor radio time.
On Tuesday (July 6, 2021) however, I added one more unique to my 2021 park count: Mountain Island Educational State Forest (K-4858).
This park is actually a modest detour during my weekly travels, but I’ve never popped by for an activation. You see, unlike other state parks I visit, Mountain Island isn’t yet open to the public on a daily basis. On their website, they state that visits must be arranged in advance, so I reached out to them the morning of July 6 and they promptly replied, welcoming me for a visit and activation that very same day!
Off the beaten path
Since this state park isn’t yet open to the public, I didn’t see the typical brown highway signs pointing me to the park entrance, but Google Maps steered me right to the front gate where there’s a sign.
The gates were unlocked and open, so I pulled into the property and met with two of the park staff who were incredibly kind and accommodating. They were both familiar with the Parks On The Air (POTA) program which made it much easier for me to ask about spots where I could set up my station.
First, though, I wanted to know more about Mountain Island Educational State Forest so I asked ranger Laura about the history of the site.
Turns out, Mountain Island is the newest Educational State Forest in North Carolina and has been in the works for more than 20 years.
The Forest is a vast conservation area that protects 12 miles of shoreline on Mountain Island Lake in the Catawba River Basin. This lake is the primary drinking water supply area for Charlotte, Mecklenburg and Gaston Counties. She told me that one in 23 North Carolinians rely on this area for their source of water.
Much of the land was originally owned by Duke Power who put it up for sale in 1998. Conservation groups purchased the land from Duke’s real estate agency in 1998 and put it into a conservation easement. The land is actually in two counties (Gaston and Lincoln) and a portion in the city limits of Gastonia.
The NC Forest Service now manages the forest and supports the public-private partnership with the counties, municipalities, and conservation groups.
Mountain Island has been actively educating school groups and the public about the river basin and local flora/fauna for many years by appointment. Currently, a new education center is being built on the property and will soon be open to the public with regular business hours. Being so close to population centers, I imagine they’ll stay busy!
Shade
Park ranger Laura was kind enough to allow me to set up under a huge tree in front of their ranger station.
I was grateful for the shade: it was 92F (33.3C) and humid.
There were no picnic tables under the tree, but I happened to have two folding chairs in my car. I used one as a table and the other as a chair. I flipped over my GoRuck GR1 backpack to make a stable base for the Yaesu FT-817ND.
I was super pleased to put the Yaesu FT-817ND back on the air. It’s been a while since I’d used it in the field because my review radios (TX-500, X5105, etc.) have taken priority.
I love the FT-817ND and believe it’s actually an exceptional transceiver for CW and SSB ops. The CW full break-in QSK is wonderful and I actually like the mechanical sound of the T/R relay switching (if you like pin diode switching, you should look the other way, though!). With the 500Hz CW filter installed, the front end is pretty bullet-proof, too!
This was the first time I had paired the FT-817ND with my 28.5 foot speaker wire antenna. The random wire antenna needs a good ATU to match impedance, so I employed the Elecraft T1 this time (soon I’ll also try the LDG Z-100A).
I had planned to do a little SSB work, but quickly realized I’d forgotten the FT-817ND microphone. A shame because this site actually has excellent mobile phone service so I could have spotted myself to the network. Next time–!
I started on 40 meters CW and worked ten stations in 21 minutes. That’s a perfect pace for me!
Next, I moved to 20 meters where I worked six more in 9 minutes.
I was incredibly pleased with how well the speaker wire antenna performed–especially on 20 meters.
From the Piedmont of North Carolina, I worked Montana, Texas, New Hampshire, and Italy with 5 watts into $4 worth of speaker wire.
I did a quick back-of-the-envelop calculation and discovered that I yielded about 943 miles per watt!
To be clear, IK4IDF did all of the heavy lifting in our contact with his 9 element Yagi, but still it’s awfully exciting to put DX in the logs with only fair propagation.
Video
Of course, I made a real-time, real-life video of the entire activation (save the set-up and take-down):
I packed up quickly because I had a SOTA activation planned that afternoon on Anderson Mountain. I’ll post a field report and video of that activation soon.
Rev 4 FT-817 Buddy Board
Also, I’m about to start soldering together G7UHN’s new Rev 4 FT-817 Buddy Board! Revision 2 worked wonderfully, but revision 4 now includes a CW memory keyer among other upgrades! (Woo hoo!) All of the components are now in the shack–just a matter of soldering them together and programing the Arduino Nano. Andy, if you’re reading this, expect a call from me soon, OM!
Thank you!
I’d like to thank all of you for reading this field report and I’d especially like to thank those of you who contribute to QRPer.com via Patreon and our Coffee Fund. While my content will always be free and QRPer is very much a labor of love, your support helps me purchase gear and supports my radio travels. With that said, if you’re saving up for your first radio or need to invest in your own kit, I’d rather you support yourself.
My goal with QRPer is to champion field radio operations and encourage others to discover the benefits of playing radio outdoors!
Lab599 have informed me that Nevada Radio will be the exclusive distributor of the TX-500 in the UK.
In addition, Waters and Stanton will be a TX-500 dealer and distrubutor.
The price will be £899 and both retailers are taking deposits (Nevada a £83.33 deposit, Waters and Stanton a £100 deposit) for the first delivery due in September 2021.
Many thanks to Jim Cluett (W1PID) who has kindly allowed me to share this recent post from his website:
Field Day – 200 QSOs with a Flashlight Battery
June 2021
by Jim Cluett (W1PID)
Field Day was an experiment this year. I operated for nine hours using a 5V 18650 battery and made 200 QSOs before calling it quits.
I operated on the deck with an MTR 4-B designed by KD1JV. The antenna was an 88 foot doublet up about 45 feet. I used the ZM-2 tuner. For power I used the PowerFilm LightSaver. This is a 5 watt roll-up solar panel that charges a 3.7V 18650 battery rated at 3.2 Ahr. The battery inside the Powerfilm product is commonly used in flashlights. The combination of the rig and the power supply is crucial.
The MTR rigs will operate from 6 to 12 volts. The Powerfilm puts out 5V to a USB socket. The secret ingredient required to bring the USB voltage up to the operating voltage of the rig is a Baofeng USB charging dongle. This device takes a 5V input and outputs 10.3 volts… perfect for the MTR transceiver. With this voltage the MTR puts out a little less than 3 watts.
The PowerFilm LightSaver is designed to charge cell phones for hikers and campers. It weighs only about 5 oz. and rolls up into a tiny package. Any USB 5V cell phone charging battery could be used with the Baofeng dongle.
This year my whole station operated on 5V. I used a Samsung tablet for logging.
In New Hampshire it was cloudy for most of Field Day, but fortunately the amorphous solar panel provides some charging even when it’s cloudy. I’m guessing that after 9 hours of operating the battery was down to about half capacity. The beauty of this system is that one could operate indefinitely with moderate sunshine.
I’ve been experimenting with this setup during hikes and bike rides for the last couple of months with a view to using it for Field Day. This year’s emergency exercise proves that it is viable for an extended grid-down power outage.
What a brilliant challenge and test for Field Day, Jim! Thank you for allowing me to share it here on QRPer. Also, a hat tip to Eric (WD8RIF) for bringing this article to my attention!
Until 2016, I had never purchased a commercial field antenna; I built all the ones I had ever used.
These days, I take a number of commercial antennas to the field and use them in my real-time videos and I really enjoy deploying and using them. My buddy Eric (WD8RIF) reminded me, though, that I hadn’t actually used a homebrew antenna in ages. He was right!
You see, while I believe commercial field antennas can be incredibly durable and compact, it’s important to note that antennas are one of the easiest components of an amateur radio system to build yourself. They require only the most simple of tools and are very affordable. And the best part? They can perform as well as those that are available commercially.
I also get a great deal of pleasure out of building things.
A simple goal
I’ve mentioned in previous posts that I often set a little goal that runs in the back of my mind for each park or summit activation I make.
On Monday, June 14, 2021, I made a simple goal: buy my antenna wire en route to Lake James State Park, build the antenna on site, and complete a valid Parks On The Air (POTA) activation.
A very simple antenna
I also decided to employ my Xiegu X5105 since 1.) it’s one of the most affordable general coverage QRP transceivers I own and 2.) it has a built-in antenna tuner (ATU).
One of the cool things about having an ATU is that, if it has the matching range, you can allow it to do the “heavy lifting” in terms of matching impedance.
Although I’d never put the X5105 to the test, I suspected its internal ATU would have the matching range to forgo building a 4:1 or 9:1 transformer and simply pair it directly with a random wire.
All I would need was a 28.5 foot length of wire for a radiator, at least a 17 foot length for a counterpoise, and a BNC to binding post adapter.
The antenna would benefit from multiple 17′ counterpoises, but I really wanted to keep this setup dead simple to prove that anyone can build an effective field antenna with a very minimum amount of components.
Even though I have plenty of wire lying around the house to build this simple antenna, I wanted to pretend I had none to prove that any wire would work.
And to add just a wee bit more challenge, I also limited myself to shopping for antenna wire between my home and the park without making a serious detour from my route. That really limited my options because there isn’t much in terms of commercial areas between me and Lake James State Park.
The wire
As I left the QTH, I decided that the best spot to shop was a Walmart in Marion, NC. It would only be a four minute round-trip detour at most. I had a hunch that Walmart would even have speaker wire which would be ideal for this application.
In my head, I imagined I would have at least three or four choices in speaker wire (various gauges and lengths), but turns out I had a difficult time finding some at Walmart. We live in such a Bluetooth world, I suppose there isn’t much demand for it these days. A store associate helped me find the only speaker wire they had which was basically a 100 foot roll of the “premium” stuff for $17 US.
While I would like to have paid a fraction of that, in the end it’s not a bad price because once you separate the two conductors, you have double the amount of wire: 200 feet.
Although the frugal guy in me cringed, I bit the bullet and purchased their speaker wire. To be clear, though, I could have found another source of wire in that Walmart, but I preferred speaker wire for this application. And $17 to (hopefully!) prove a point? That’s a deal! 🙂
Lake James State Park (K-2739)
Once I arrived on site, I found a picnic site I’d used before with some tall trees around it.
Here’s how I prepared the antenna:
First, I cut 28.5 feet of the speaker wire from the roll and split the paired wires so that I’d have two full 28.5 foot lengths.
Next, I stripped the ends of the wire and attached banana jacks I found in my junk drawer. Although these aren’t necessary as the binding post adapter can pair directly with the wire, I though it might make for a cleaner install. In the end, though, I wasn’t pleased with the connection to the radiator, so dispensed with one of the banana jacks on site, and later dispensed with the other one as well. The connection is actually stronger without the banana jacks.
I then deployed the 28.5 radiator with my arborist throw line, and laid the other 28.5 half on the ground (the ground of this antenna would pair with the black binding post, the radiator with the red post). I only needed 17 feet of counterpoise, but once it couples with the ground, I don’t think any extra length makes a difference (although less than 17 feet likely would).
The antenna was essentially set up as a vertical random wire with one counterpoise.
I then plugged the BNC binding post adapter into the rig, hit the ATU button, and was on the air.
I’ll admit: I was a bit nervous putting this antenna on the air. Although I felt the X5105 ATU *should* match this antenna, I had no idea if it actually would.
Fortunately? It did.
At this point, if you don’t want any spoilers, I suggest you watch my real-time, real-life, no-edit, no-ad, video of the entire activation (including buying and building the antenna!).
I was very pleased that the X5105 found a match on the 40 meter band.
I started calling CQ in CW and validated my activation by logging 10 stations in 13 minutes.
Honestly: it doesn’t get much better than this.
I logged three more stations on 40 meters CW, then moved up to the 30 meter band where the X5105 easily found a match.
I worked one station on 30 meters before heading back down to the 40 meter band to do a little SSB. I logged three SSB stations in five minutes.
Mission accomplished!
In the end, I logged a total of 17 stations including a P2P with K4NYM.
Not bad at all for speaker wire!
After the activation, I tested the X5105 ATU by trying to find matches on other bands–I was able to find great matches from 60 meters to 6 meters. Most impressive!
All I can say is that I’m incredibly impressed with the X5105 internal battery. This was my fourth activation from one initial charge on May 16. The battery lasted for 20 minutes, taking me well beyond the 10 contacts needed to validate this park. I’ll now consider taking the X5105 on a multiple SOTA summit run!
Short Hike
Even thought the heat was intense and the humidity even more intense, I decided to take in a 2 mile hike post-activation. I snapped a few shots along the way.
This is the Christmas Fern which derives its name from a few characteristics: its resilience to early season snows maintaining a dark green color beyond Christmas, and because folks believe its leaves are shaped like Santa’s boots or even Santa on his sleigh.
Improvements
I’ll plan to add more counterpoises to the speaker wire antenna as I know this will only help efficiency.
In addition, I’ll plan to build even more antennas with this roll of speaker wire. If you have some suggestions, feel free to comment!
Like many I’ve taken the plunge on an Icom IC-705. Even though I sold off an old Yaesu 817 to finance part of it, it still cost a very pretty penny and I didn’t want to shell out more for a tilt stand or bail.
Especially at the rather extravagant prices they’re going for now. $30, $40? No thank you. (Really, the radio, at $1300, should have come with one in the box, but why beat that dead horse – it is what it is.)
In any case, I looked around the house for something to DIY one with. I found a couple of metal angle brackets, screws that fit the mounting holes, and some tiny rubber bumpers to shield from nicking up the radio’s plastic case. Voila! Instant tilt stand. See pics:
And just the right angle too. My plan is to plastic-dip the brackets so I can get rid of the bumpers as well as not nick up any softer surface the radio sits on.
IC-705 Bluetooth Question
Meanwhile, a question for you and other owners of this radio.
What’s up with the Bluetooth function? I have three bluetooth speakers and a small audio amp with built in BT, and I can’t get audio to play through them. The unit sees the accessories and connects. But no sound. I’d updated the firmware to 1.24, just in case they might have addressed any issue. Still no joy.
That being said, I can control the radio via BT with android apps, etc, but no audio. A very disappointing development for such an expensive radio.
Oh well. The good with the bad and all that…
Joe Patti (KD2QBK)
Thank you for sharing this, Joe! That’s a very clever and simple solution for the IC-705 stand.
As for the Bluetooth functionality, I’ve yet to use it. Hopefully, someone here can chime in and comment with advice!
Each time I head to a park or summit, I have a goal in mind.
With summits, it’s getting to the summit and activating it because, sometimes, that can be a challenge in and of itself. I’m not exactly Sir Edmund Hillary, so I’m happy when I make it to the top of any summit!
Parks, however, offer me the chance to experiment with transceiver/antenna combos, test gear, and explore hikes. Parks tend to be more accessible and spacious than summits and even have shelter options if weather is questionable.
I don’t even attempt afternoon summit activations if they require a decent hike and there’s a good chance of pop-up thunder storms.
On Monday, June 7, 2021, it was hot and incredibly humid in the Piedmont of North Carolina. That early afternoon, little patches of showers were passing through the region delivering brief, isolated downpours.
The weather forecast also predicted a high likelihood of thunderstorms that afternoon. (Turns out, they were correct.)
Those were not conditions for a SOTA activation, rather, I decided to pick out a park I knew could offer up some shelter options. Lake Norman was an obvious choice–there’s a very nice covered area at their visitor’s center and also two large picnic shelters at the other side of the park. Lake Norman it was!
Goal
I drove to Lake Norman State Park with one goal in mind: deplete the Xiegu X5105 internal battery. I had assumed the battery would only power the X5105 for perhaps two activations on one charge.
Now three full weeks later, I decided I would deplete the battery at Lake Norman because that afternoon I had a decent amount of time to play radio in the field. In my head, I was prepared to squeeze perhaps 30-45 minutes more air time out of that one May 16 battery charge.
Lake Norman (K-2740)
I arrived at Lake Norman State Park and scouted out a site. Fortunately–it being a Monday in the early afternoon–it wasn’t busy and all three shelters were available.
I chose to set up at a shelter at the far end of the main picnic area.
The humidity was so thick that day, I was sweating just walking around the site. I noticed in my activation video (see below), I was breathing as hard as I would hiking to a summit even though I was just tooling around the picnic shelter.
I had no doubt in my mind that if a thunderstorm developed, it would be a doozie! (I was right about that, too–keep reading.)
On The Air
I paired the Xiegu X5105 with my Chameleon MPAS 2.0 mainly because I wanted to see how easily the X5105 ATU could match this multi-band vertical. Turns out? Quite easily.
I expected the X5105’s battery to deplete to the point that I would need to use an external power source to complete the activation, so I connected my QRP Ranger battery pack, but didn’t turn it on. I knew that when the radio died, I could flip the QRP Ranger’s power switch and perhaps only lose a few seconds of air time.
I hopped on the air and started calling CQ. I planned to operate the X5105 until the internal battery died, then (if needed) continue operating with the QRP Ranger until I logged my 10 contacts for a valid activation. Post activation, I planned to hike one of the Lake Norman loop trails.
Normally, I would mention the number of contacts I made perhaps noting the bands that were most productive. Instead, if you’d like to experience this activation with me, you might consider watching the activation video.
Please note that this is the longest video I’ve ever published, so don’t feel any pressure to watch it in its entiretity:
Impressed
Let’s just say that the X5105 sold me.
The activation was incredibly fun and I logged 20 stations (18 CW and 2 phone) from Alaska to Spain with my 5 watts and the MPAS 2.0 vertical. Propagation conditions were only “meh” but since I had the time to play radio longer, I was able to take advantages of little openings as they happened.
X5105 Battery
The X5105 won.
I simply gave up on trying to deplete the internal battery because I was running out of time to fit the activation and a much needed hike that afternoon before thunderstorms moved in.
I operated over 90 minutes with constant CQ calls and the battery never made it below 10.2 volts.
A most welcome surprise.
No mic, no problem!
During the activation, I remembered that I had been asked by readers and viewers to include more SSB work.
Problem was, I left my X5105 mic at the QTH (nearly 2 hours away by car).
I remembered though that, like the Elecraft KX2, the X5105 has a built-in microphone.
I decided to give that mic a trial by fire and, by golly, it worked!
Not only did it work, but it worked well.
The X5105? A keeper.
It was at Lake Norman that day, I decided the X5105 was a keeper.
That evening, I reached out to Radioddity–who lent this X5105 to me–and offered to pay full retail price for it either in cash or via ad credit
Since Radioddity is a sponsor on my other radio site–the SWLing Post–we decided that, since their ad was coming up for renewal soon, I would simply extend their ad time an equivalent amount of months as the full value of the X5105 ($550 US). This saved them from having to cut a check in two months. Worked for both of us.
I have much, much more to say about the X5105 and will do so in an upcoming review.
In short, though? It’s not a perfect radio by any means, but I feel like it really hits a sweet spot for the QRP field operator.
I enjoy putting it on the air and it’s an incredibly capable little transceiver.
I’m very pleased to now put it in rotation with my other field radios. Look for it in future reports!
QSO Map
Here’s the QSO Map for this activation (click to enlarge):
Hike and dodgy weather
After packing up my gear, I walked over to a nearby trailhead and checked out the trail map. I was prepared to take a very long hike that afternoon despite the heat and humidity, but I also knew conditions were ripe for a thunderstorm.
I decided to take what appeared to be a fairly short loop trail along the lake. Looking at the map, I assumed the trail might be 1 mile or so long.
The hike is well-worn and well-marked, so there’s no getting lost here. That’s one of the reasons I didn’t bother looking at my GPS map or even consulting the trailhead map in detail.
Instead, I simply started hiking the Lake Shore Trail loop. It was gorgeous. Here are a few photos (click to enlarge):
The skies started getting dark, though, and I heard a little distant thunder.
I decided it might make sense to consult my phone for the weather map.
A line of thunderstorms had developed and they were sweeping toward me. Time to pick up the pace of hiking!
It was at this point I realized I had underestimated the length of this loop trail. Part of me was quite pleased that it was longer than I anticipated, but the part of me that didn’t want to be caught out in a t-storm wanted to get back to the car ASAP.
I checked another weather map a few minutes later.
I decided that jogging the rest of the trail made sense!
Turns out the 1 mile loop was something closer to 3 miles when I included the walk back to the car.
I did make it back to the car in time, though, right before the heavens opened.
It’s no exaggeration to say that I was sincerely concerned about the possibility of tornadoes in that storm front.
The skies were dark enough that streetlights turned on and the rain was incredibly heavy with strong wind gusts. I saw flash flooding and driving conditions were nearly impossible. I parked next to a brick building in the town of Catawba and waited for the strongest part of the storm to pass. I was also very grateful I wasn’t still on the trail by the lake!
Of course, the storm passed and I expected conditions to be a little drier behind that front, but I was wrong. I think the humidity level increased to 150%. Ha ha! No worries, though, as I was on my way to air conditioned space!
Thanks so much for reading this field report and stay safe out there!
Here in the Asheville, NC area, there’s one mountain that almost anyone can recognize by sight: Mount Pisgah.
Mount Pisgah is prominent because not only is it one of the taller summits bordering the Asheville basin, but it’s also home to the WLOS TV tower and and a cluster of public service and amateur radio repeaters.
I’ve been eager to activate Mount Pisgah for Summits On The Air (SOTA). Along with Bearwallow Mountain, and Mount Mitchell, it’s one of the most popular SOTA summits in the Asheville area.
Being so accessible from the BRP, the Mount Pisgah trail also receives a heavy amount of foot traffic. Being locals, our family tends to skip this trail when we’re venturing along the BRP because it can be so congested at times.
Mount Pisgah (W4C/CM-011)
On Tuesday, June 1, 2021, Hazel and I decided to hit Mount Pisgah fairly early and avoid the crowds.
We arrived at the trailhead around 8:15 AM and there were very few cars there–a good sign indeed!
Hazel was chomping at the bit to start our hike!
The trail is only about 1.5 miles with a 700 foot elevation gain, so not strenuous.
It was blissfully quiet and we only passed two other groups of hikers on the way up.
I’ll admit that I was keeping an eye out for black bears, though. We saw bears very close to the trailhead entrance on the BRP that morning. I may have mentioned before that black bears are not something to be feared here in western North Carolina; they typically avoid people and your chances of being fatally injured by a black bear are incredibly slim–right there with being struck by lightening.Still, the black bears that wonder near populated spots like Pisgah along the parkway are often fed by tourists and lose their fear of humans. Not only that, but they even expect people to be food dispensers. Not good. As we say around here, “a fed bear is a dead bear” because feeding bears leads to aggressive behavior and the poor creature’s eventual euthanization.
But I digress!
Hazel and I reached the summit and were happy to find that we were alone. Pisgah’s summit can get very crowded as there really isn’t a lot of space–only a large viewing platform next to the massive tower.
When we arrived on site, the summit was surrounded in clouds.
I briefly considered operating from the viewing platform, but knew I would have to cope with a lot of curious hikers while trying to operate CW. Since I’m not a good multitasker, I decided to do what many SOTA activators do: carefully pass under the tower and find an activation spot on the other side of the summit.
Hazel and I found a small overgrown trail used primarily by those working on the tower. I deployed my station in a small clearing.
For this activation, I chose my Elecraft KX2 and paired it with the Chameleon CHA MPAS Lite which has quickly become one of my favorite SOTA antennas.
I deployed the CHA MPAS Lite perhaps 15 feet away from my operating spot, in the middle of a spur trail. I was able to extend the 17′ vertical without touching any branches. I rolled out about 20-25′ of counterpoise wire along the ground.
After setting up, it dawned on me that I’d forgotten my clipboard. No worries, though! I simply flipped over my GoRuck GR1 pack and used the back as an operating surface.
On The Air
Not only was this a summit activation, but also a park activation–indeed, a two-fer park activation at that! The summit of Mount Pisgah is in both Pisgah National Forest (K-4510) and Pisgah State Game Land (K-6937).
If I’m being honest here–since I’m not a “numbers guy” and don’t follow my activation counts closely each year–it’s very tempting not to announce or count this activation in both the SOTA and POTA programs since K-4510 and K-6937 aren’t rare entities. The main reason for this is because, back home, I end up doing double entry with my logs: loading them via the SOTA online log submission tool, then entering them in N3FJP or TQSL for submission to the POTA and WWFF programs. It can be very time-consuming doing this.
I am working on a way to “massage” the ADIF file data so that I can submit it to both programs with less effort.
But, of course, I announced the activation on both SOTAwatch and the POTA site. At the end of the day, I’ve never *not* announced a dual SOTA and POTA activation because I can’t help but think it might offer up the sites to a new POTA hunter. It’s worth the extra log entry later.
Another plus with activating a site in two programs is that you’ll likely be spotted in both thus increasing your odds of logging the necessary contacts to validate your activations.
Turns out, snagging valid activations that Tuesday morning was incredibly easy. And fun!
Fabulous conditions!
I started on 20 meters CW and logged fifteen stations in eighteen minutes. The band was energized because not only did I easily work stations from France, Slovenia, and Spain in Europe, but also stations all over North America from the west coast to as close as the Ohio valley and into Canada.
I wanted to play a little SSB, so I moved to the phone portion of 20 meters and spotted myself on the SOTA network. I worked five stations in eight minutes. Fun!
Next, I moved up to the 17 meter band and stayed in SSB mode. I worked five more stations in nine minutes. Had I only activated this site in SSB on 20 and 17 meters, I could have obtained both a valid SOTA and POTA activation in 17 minutes.
Even though I knew I needed to pack up soon, I decided to hit the CW portion of 17 meters before signing off. I started calling CQ and was rewarded with sixteen additional stations in eighteen minutes.
Phenomenal!
All in all, I logged 41 stations.
Here’s the QSO Map of my my contacts–green polylines are CW contacts, red are SSB (click to enlarge):
A welcome interruption!
If you watch my activation video, you’ll note that as I moved to the 17 meter band and started calling CQ, another hiker popped in and introduced himself.
Turns out it was Steve (WD4CFN).
As Steve was setting up his own SOTA activation on Mount Pisgah next to the observation deck, his wife, Patty, heard my voice off in the distance giving a signal report.
Steve and I had a quick chat and coordinated frequencies so we wouldn’t be on the same band at the same time and interfere with each other.
After finishing my activation, I stopped by the observation deck and spent some time with Steve and Patty as Steve finished his SOTA activation and packed up his gear.
Steve was also using an Elecraft KX2 and strapped his telescoping fiber glass mast to the side of the observation deck to support a wire antenna. Very effective!
Hazel and I hiked back to the trailhead with Steve and Patty. It was so much fun talking ham radio, QRP and SOTA with kindred spirits. What an amazing couple!
Steve and Patty were actually on a multi-day camping trip in WNC and planned to hit two more summits by end of day. In fact, I got back to the QTH *just* in time to work Steve (ground wave!) at his second summit of the day. It was fun hunting someone I had just spent time with on a summit!
Steve and Patty: Again, it was a pleasure to meet you both!
Hazel and I both needed a little trail time that Tuesday morning. Hiking to the summit in the low clouds, taking in the views, enjoying a stellar activation and then meeting new friends? It doesn’t get any better than this.
I’ll say that I do love the Elecraft KX2 and CHA MPAS Lite combo. It makes for a compact and effective SOTA pairing that can be deployed so quickly.
A couple months ago, I ordered a SOTAbeams Tactical Mini fiberglass telescoping pole. I plan to pair it with my QRPguys tri-bander kit antenna.
If I’m being honest, though, I find that the CHA MPAS Lite is so quick to deploy–like 2-3 minutes tops–I’ve yet to take the Tactical Mini and Tri-Bander to a summit. No worries, though, as I will eventually deploy this pair on a summit. Admittedly, I need to work on my mast guying skills in advance–let’s just say that I’m still in that awkward stage of struggling to manage each guy line as I try to keep the Tacmini vertical during deployment. I welcome any tips!
QRP radios, product announcements, reviews, news and more. Low power amateur radio fun!
Please support QRPer by adding us to your whitelist in your ad blocker. Ads are what helps us stay online. All of our ads are ham radio related--no junk, we promise! Thank you!
If you’ve been following this blog for long, you might recall that it was only last year when I purchased an FT-817ND from my buddy Don. I did this after realizing I missed the FT-817 I originally owned shortly after it was introduced to the market in 2001. It didn’t help that I really wanted to build and try the FT-817 Buddy Board by Andy (G7UHN). [Andy: V4 is next on my bench..I promise!]
Speaking of side rails…
The FT-817ND I purchased last year came with a 2kHz Inrad SSB filter. I replaced it with a 500 Hz Collins filter I purchased from Steve (WG0AT)–thanks, Steve!
