Category Archives: Portable

Portable

Mark your calendars: The Portable Operations Challenge – October 3 & 4, 2020

Leave a comment

(Source: Fox Mike Hotel)

Ridgeland, Mississippi— August 10, 2020 — A new contest has been announced that will level the competitive playing field between the Big Guns and the Little Pistols who operate a portable station. It’s called the Fox Mike Hotel Portable Operations Challenge. “The scoring metric is the distance-per-power metric with multipliers for portable operators and the difficulty of the transmission mode,” said Ed Durrant DD5LP, a member of the Steering Committee for the POC. “We are using kilometres-per-watt as the score for a contact. But those using a more difficult transmission mode such as phone will get a higher multiplier than those using the more efficient modes of CW and digital. Being a portable station will receive an additional multiplier, especially when contacting another portable station.” The scoring system is based upon the golf metaphor of the handicap index used to equalize the opportunity for all players to win when they have unequal ability and play on courses with varying levels of difficulty.

The POC is being sponsored by ARRL’s National Contesting Journal, the UK DX Foundation (CDXC), the Hellenic Amateur Radio Association of Australia and the South African Amateur Radio League. NCJ Editor, Dr. Scott Wright K0MD, said, “NCJ is very pleased to be an official sponsor of this contest event. It will encourage activity by operators who are “limited by real-estate,” and do not have a full-blown contest station. Events like this stimulate more interest in contesting and it will have an international scope to give chances to snare some new DXCC entities.” Don Field G3XTT, Editor of Practical Wireless magazine and highly experienced DX contester who is President of the UK DX Foundation, added “This is an exciting new contest event. I’m happy to serve on the Steering Committee and help in any way I can!” A highly competitive contest operator from Australia, Tommy Horozakis VK2IR, was very enthusiastic to join the Steering Committee to help plan the POC: “I’m really excited to be part of the team and can’t wait to get started.” Tommy VK2IR added that the Hellenic Amateur Radio Association of Australia was pleased to be an award plaque sponsor for the event.

The Portable Ops Challenge is the brainchild of Frank Howell K4FMH who says his portable ops team was the inspiration. “I hear many operators who get outdoors and try to dip their hands in a conventional contest say two things. They enjoyed the competition. And it’s a shame that the Big Guns dominate the realistic chances of winning. That’s simply the way it is in the vast majority of contests but it made my portable ops team think: is there a way to level the playing field? I think the Steering Committee consisting of both veteran DX contest participants and some of the best portable operators in the world has come up with something worth giving a go,” Frank K4FMH said. “I’d say the question is, whether the Big Guns can win using the handicap system that the Steering Committee has produced. With this scoring metric, it’s more about radio sport than radio gear. But we won’t know until many of the Big Guns enter the Portable Ops Challenge. We are building it but will the Big Guns come?” Only time will tell but the first POC is nearing it’s inaugural launch.

Scheduled for October 3 and 4, 2020, the POC’s rules and other relevant documents are located at foxmikehotel.com/challenge.

Click here to download the full press release. (PDF)

Click here for rules and regs.

News, Portable, POTA

Snagging two state game lands in three days for Parks On The Air

Leave a comment
View from Waterrock Knob on the Blue Ridge Parkway (June 13, 2020).

The following article first appeared on our sister site, the SWLing Post.

You might have noticed from recent posts, I’ve been on a bit of a POTA (Parks On The Air) kick lately.

I’ve been enjoying taking the Xiegu G90 to the field and seeing just how well it performs under intensive use on battery power. So far, it has certainly proven itself to be a capable field rig.

Still, on two recent activations I also brought my trusty Elecraft KX2 along as well.  Without a doubt, it’s still my number one field rig. It will be difficult for another field transceiver to displace it.

With that said, the G90 is less than half the price of the KX2 (when the KX2 is configured with the optional ATU). The G90 can also pump out a full 20 watts of power–nearly double that of the KX2. I also love the G90’s spectrum display which makes it so easy to find free frequencies and hunt other parks. Its internal antenna tuner–like the KX2’s–can match almost anything very quickly.

Here are a couple of quick reports from my recent activations:

William H Silver State Game Land (K-6967)

Saturday, my family had planned a trip to visit my father-in-law. My wife encouraged me to find a nearby park to activate as there are so many between our house and his. I made it slightly more challenging by deciding to find a park or POTA entity I’d never visited.

Turns out the William H Silver State Game Land was only a 30 minute detour. I had never visited it and, in fact, it was even an ATNO (All Time New One) for Parks On The Air, meaning no one had yet activated it.

I had initially planned 1.5 to 2 hours for the activation, but we were running behind Saturday morning so I had to cut my time at the park to a total of about one hour–which included set-up, operation, and take-down.

We arrived at the site and I immediately deployed my EFT Trail-Friendly end-fed antenna.

My 12 year old daughter (who is studying for her ham radio license and is a great at digging callsigns out of the noise) helped me log contacts. I stuck with very brief exchanges so that I could work as many stations as possible. When activating an ATNO, I always want to give as many POTA “hunters” as possible the best opportunity to put the site in their log books.

I started on the 40 meter band and worked 20 stations in 25 minutes with the Xiegu G90.

I then moved up to the 20 meter band and switched over to the Elecraft KX2.

Turns out, 20 meters was pretty unstable, so I worked very few stations. I did work a station in California with 10 watts and a wire, though, so I’ll still call that a success.

I plan to visit this same site again later this year–it’s very accessible.

Buffalo Cove State Game Land (K-6886)

Monday morning, even though the weather outlook was dodgy, I scheduled another park activation which, like Saturday’s, was at a state game land which was another ATNO.

I like game lands. Unlike state parks, I don’t have to worry about crowds and I also usually get to take my Subaru or truck off-road. Access roads here in the mountains are typically steep, curvy, and washed-out in places. Finding the site can be very challenging, too. Still, I love adding a little off-road fun to a park activation!

The Buffalo Cove State Game Land is much larger than park K-6967 (above). I drove deep into the lands and found a large parking and camping area for hunters. I had the whole place to myself, so I found the best tree to support my end-fed antenna.

I operated the KX2 exclusively on this activation because I wanted to use its voice keyer and my Heil headset for hands-free VOX operation.

In the course of 90 minutes, I worked 51 stations from the trunk/boot of my car.

Many thanks to my good friend Mike (K8RAT) who made the whole process much smoother by spotting me on the POTA site.

Band conditions were actually pretty rough today, so I was very pleased with the results and intend to return here for a weekend activation later this year as well. This would actually be an ideal location for making low-noise portable SDR recordings while camping overnight.

This weekend, I decided I want to increase my portable field antenna arsenal. More about that in a future post!

Do you enjoy the QRPer & the SWLing Post?

Please consider supporting us via Patreon or our Coffee Fund!

Your support makes articles like this one possible. Thank you!

Portable, POTA, QRP, Reviews

An impromptu Parks On The Air (POTA) activation with the Xiegu G90

Leave a comment


Note: The following is a cross-post from the SWLing Post.

Yesterday, I was in my hometown helping my parents with a few projects. Around noon, I realized that I had a good four hour window of free time–a true rarity these days!

I had two fully-packed go bags in the car: one with my trusty Elecraft KX2, and one with my recently acquired Xiegu G90.  On the heels of a successful POTA activation this weekend, I was itching to activate a new POTA site.

I did a quick check of the POTA site map and decided a trip to the South Mountains State Park (K-2753) was in order. The park was a nice 30 minute drive on back roads, so why not?

I posted a quick announcement on the POTA website, and jumped in the car.

When I arrived at the park, I noted an excellent, easily accessible picnic site with a nearby tree to hang my EFT Trail-Friendly antenna. Since I hadn’t been to this park in many years, I continued driving to check out other potential POTA sites.

In the main parking lot, I spotted a ham radio operator’s car with a prominent callsign on the back window and a POTA bumper sticker. I couldn’t see their operating site from the parking lot and since we’re all trying to social distance these days, I didn’t bother searching for them to introduce myself.

While it’s certainly allowed to have two activators running a park at the same time, I really didn’t want to impose and certainly didn’t want to cause any QRM by operating on the same meter band.

Contingency plan

I had a “Plan B” in mind in case the park wasn’t accessible.  On the west side of South Mountains State Park there was another POTA site: the South Mountains State Game Land (K-6952). I started driving in that direction, then used Google Maps to help me locate the entry road. Turns out, it was an additional 35 minutes of driving! Still, it was a beautiful day so no complaints from me.

The road was typical of game land roads: gravel and washed out in places. I had to ford one creek. My Subaru had no problem doing this, of course. (I actually love off-roading, so secretly I hoped the road would be more challenging!)

About four miles in, I found a pull-off that was big enough for my car and had an ideal tree to hang the antenna. I backed into the site, opened the hatch on the Subaru, and used the trunk/boot as my radio table.

Within ten minutes I had the G90 on the air.

I started calling CQ on the 40 meter band and thanks to buddies Mike (K8RAT) and Vlado (N3CZ) I was spotted on the POTA website.

Although there was a fair amount of QRN on 40 meters, now that the G90 has an RF Gain control (with latest firmware v 1.74), I could easily mitigate it.

I worked a number of stations on 40, then decided to move up to 20 meters.

I was very impressed with the response on 20 meters as well. Fading (QSB) was very deep, however, so I kept contacts brief. At times, stations would call me, I’d give them a 59 report, and when they’d reply I could barely hear them (and vise-versa). It took a little patience and good timing, but I believe I worked everyone who called me.

In the end, I had a total of 27 contact in the log with about one hour of operating. Here are my log sheets:

After transmitting steadily for an hour at a full 20 watts, the G90 body was pretty warm to the touch, but it had operated flawlessly.

A great field radio

The G90 is a gem of a transceiver and has some features that make it ideal for field use.

For one thing, I love being able to keep track of my battery voltage on the display:

Also, the G90 has excellent selectivity. On both 40 and 20 meters, at times I could see adjacent stations on the spectrum display that would have bled over and created QRM on less robust receivers.

I also like the ability to control all of the major transceiver functions without  having to dive into an embedded menu. Adjusting the filter, RF gain, attenuator, and pre-amp, for example, is super easy.

I love the spectrum display, too. In the field, it’s nice to be able to find an open frequency by simply watching the display for a minute or so before calling QRL or CQ. It also allows me to see when folks are tuning up nearby to make contact with me.

Although I’ve been using a resonant antenna in the field, the G90 has a very capable built-in ATU.  Back home, I’ve used it and have been very impressed with its ability to find good matches. Yesterday, for fun, I was even able to get it to tune up the EFT Trail Friendly antenna on 80 meters! I doubt it would be efficient, but the ATU did find a 2:1 match.

The only two features I feel like the G90 is missing are a notch filter (both manual and auto) and a voice keyer. I’m sure a notch filter could be added in a future firmware update (others have been asking for this as well), but I doubt a voice keyer could be added as easily. In truth, the voice keyer is a bit of a luxury, but it’s a feature I use without fail on my KX2 since park and summit activations often require constant CQ calls. Being able to record a CQ and have the radio automatically send it allows the op to drink water, eat lunch, and relax between contacts.

This is a lot of radio for $450 US shipped. I’ve also learned that the G90 has a very active community of users via this Groups.io email list.

I had planned to sell the Xiegu G90 after my upcoming review in The Spectrum Monitor. I must admit: this transceiver is growing on me. It might be hard to let go of it.

Please consider supporting us via Patreon or our Coffee Fund!

Your support makes articles like this one possible. Thank you!

Portable, POTA, QRP

First time in the field with the Xiegu G90 QRP transceiver

Leave a comment

(Note: this post first appeared on our sister site, the SWLing Post.)

Earlier this week, I took delivery of a new Xiegu G90 general coverage QRP transceiver. I’m reviewing this portable rig for The Spectrum Monitor magazine. Although this Chinese manufacturer has been around for a few years, this was my first purchase of a Xiegu product.

I’ve had the G90 on the air from home for a couple days, but I feel like the best way to test a QRP transceiver is in the field!

Due to the Covid-19 lock-down and a number of our regional parks either being closed or severely limiting visitors, I haven’t made many POTA (Parks On The Air) activations this year.

Recently, however, North Carolina has been opening state parks and allowing visitor access to hiking trails and picnic areas, but keeping all facilities (stores, cafes, visitor centers, and restrooms) closed to the public.

Yesterday, our family decided to pack a picnic lunch and head to Mt. Mitchell State Park (POTA site K-2747). My wife knew I was chomping at the bit to play radio in the field and actually made the suggestion. (She’s a keeper!) 🙂

There were only a dozen people at the park so we essentially had the place to ourselves. Better yet, it gave me the opportunity to pick out the most ideal picnic site to set up and deploy my EFT Trail-Friendly 40/20/10 antenna.

The G90’s backlit color display was actually quite easy to read in the field. My phone’s camera filter made it look darker than it actually was.

My POTA activation was unannounced and I didn’t have Internet access to self-spot on the POTA website, so I started the activation old school by calling “CQ POTA” until someone happened upon 7286 kHz.

After perhaps 10 minutes of calling CQ, Greg (KE0HTG)–a helpful POTA chaser–finally found me and spotted me on the network.

I worked a few stations in succession, but summer QRN levels were incredibly high and I believed static crashes were cloaking would-be contacts. The G90 has no RF Gain [Actually, thanks to this feedback, I now know the G90 does indeed have an RF Gain control (firmware version 1.73 and higher).] I asked one kind operator if he would hold while I switched over to my trusty Elecraft KX2.

The KX2 did a much better job managing the noise and that same op was easily readable where with the G90 I could barely copy him. I suspect I could have tinkered with the G90’s AGC levels to better mitigate the noise, but I didn’t want to do this in the middle of an activation.

I worked about fifteen stations with the Elecraft KX2 on 40 meters.

One real advantage of the KX2 during a POTA activation on SSB is its voice memory keyer (of course, it also has a CW memory keyer). I simply record my CQ and have the KX2 repeat it until someone replies, then I hit the PTT to stop the recording. Not only does this save my voice, but it also gives me an opportunity to eat my lunch while calling CQ!

I eventually moved up to the 20 meter band and switched back to the Xiegu G90.

On the 20 meter band, the G90 handled conditions like a champ.

Someone eventually spotted me on 20 and I worked a few stations.

The 20 meter band was very fickle and unstable yesterday. For example, I struggled to finish a contact with an operator in Massachusetts, yet got a solid 59 report from Spain with only 20 watts.

No activation is complete without brewing a cup of coffee on the alcohol burner!

I had a great time with the G90 in the field. I can see why it’s become such a popular transceiver as it offers incredible bang-for-buck (it can be purchased new as low as $450 US shipped).

This week, the noise levels on the 40 meter band should be very high here in North America, so I plan to spend more time with the G90 settings and see if I can mitigate the QRN a little better. I’d welcome any tips from G90 owners.

And yes, I’m already eyeing a couple of parks to activate next week!

Post Readers: Please comment if you’re familiar with the Xiegu G90 or any of the other Xiegu transceivers.

News, Portable, QRP Radios

The Yaesu FT-70G: Where the FT line met Milcom

4 Comments

Note: this is a cross-post from the SWLing Post.

Earlier today, I stumbled upon a very unique transceiver in Universal Radio archives: the Yaesu FT-70G.

Here’s the description from Universal:

The Yaesu FT-70G is a portable HF transceiver covering 2 to 30 MHz transmit. Receive is from 500 kHz to 30 MHz. Frequency selection is via BCD switches to 100 Hz. There is a clarifier for fine tuning. Optional FNB-70 NiCad Battery. Please note that the optional 10F-2.4DL filter is required for LSB opeation. The Yaesu FT-70F is similar, but is a channelized fixed version offering up to 11 frequencies.

Two hours ago, I was not aware that the FT-70G existed.  Now? I want one!

I’m a real sucker for vintage rugged field radio gear, so I never discovered the FT-70G until today. Turns out, they’re relatively rare. A little light research reveals that it’s a highly-desired transceiver in the world of HF Packers–those radio enthusiast who like “manpack” commercial and military gear.

The FT-70G has a distinct military look and feel with the BCD switches to change frequency, rugged toggle switches, chassis extensions to protect the front panel, and attached screw-on connector caps.

What’s really surprising is that the FT-70G has a general coverage receiver (500 kHz to 30 MHz). Admittedly, it would not be fun band-scanning with those BCD switches…but still!

This website has a number of photos. They also have a product description likely from the original Yaesu/Vertex Standard FT-70G description:

“The FT-70 series HF field portable manpack transceivers are designed to provide reliable communications under rugged conditions in the military and commercial environment. The frequency synthesized, all solid-state circuitry and die-cast anodized aluminum enclosure and battery pack make a highly portable, weatherproof station. Flexible operation for optimum communications under a wide range of propagation conditions are assured by SSB (USB, LSB), semi break-in CW, AM, or audio interfaced Data modes. All controls, antenna, and interface ports are available and selectable via the front panel for maximum effectiveness and ergonomics in field, base, and manpack applications. The companion antenna tuner FC-70 is compatible with walking manpack, field portable, or base configurations. The highly effective vertical tripod mount antenna system YA-70 is deployed and stowed easily and quickly, pulling double duty by converting to manpack whip while on manuevers. High quality handset YH-70 provides communications privacy and clarity.”

Again, check out the excellent photos of the full manpack kit.

As I researched pricing, I discovered this FT-70 with accompanying FC-70M antenna tuner on eBay right now with only 6 hours left of bidding:

At time of posting, the bids are at $520. I fear this will soar well above my comfort level before bidding ends. (Like I need another field radio anyway, right?)

Post readers: Please comment if you’re familiar with the FT-70G and especially if you’ve ever owned one.  I’d love to hear about your experience with this unique rig.

Announcements, Hamvention, Kits, Portable, Product Announcements, QRP, QRP Radios

QRP Labs new QCX+ QRP CW/WSPR transceiver kit

1 Comment

Many thanks to Pete (WB9FLW) who writes:

Hi Thomas,

QRP Labs has just announced the QCX+ which as the name implies is an upgraded version of the very popular QCX line of transceivers

To date almost 10,000 kits have been sold, here’s a brief overview of the the differences and new features made to this popular Transceiver.

The QCX+ is the almost same circuit as the QCX, with two very minor changes. QCX+ runs the same firmware as QCX, and has identical operational and performance characteristics. QCX/QCX+ firmware will always be compatible with both the QCX and QCX+. The evolution of QCX to QCX+ provides several improved features in physical layout, as follows:

1) Physical layout of controls and connectors

2) Optional enclosure

3) Additional and changed connectors

4) More spacious PCB, more than double the board area, with less densely packed components, and more test/modification points

5) Improved heatsinking

6) Three minor circuit changes

7) No microswitch key

Price has gone up slightly to $55, still no other QRP Transceiver on the market today comes close to the features offered by the QCX+ at this price point.

More Info:

https://qrp-labs.com/qcxp.html

Thank you so much Pete! You’re an enabler! Since I’m not at Hamvention right now, those radio bucks are burning a hole in my pocket. The QCX+ looks like a fun transceiver to build! Thanks for the tip.

Events, News, Portable

K-5589: Attempting rare POTA activation Tuesday

Leave a comment

If you’re involved with the Parks On The Air program, you may be interested in a park I plan to activate on Tuesday, February 25, 2020.

I plan to activate K-5589, Seneca State Forest in West Virginia.

I thought I’d give a heads-up here in case you need this park–it’s only been activated once before and only a handful of contacts logged.

I plan to start around 22:00 UTC (Feb 25). Time is approximate as this activation will take place after a long day of driving. This activation is in the middle of the National Radio Quiet Zone thus I will have no mobile phone reception to self-spot or provide tips to chasers. I do have approval from the NRQZ coordinator to operate, however.

I will pack my Elecraft KX2 and Mission RGO One transceivers. I plan to deploy a long wire antenna with the idea that perhaps I can serve up 80 meters as well. I will also bring the W4OP loop in the unlikely event I’m not allowed to use a tree to support my wire antenna (this would certainly restrict me to 40 and 20 meters).

Look for me on 3,986, 7,286, and 14,286 kHz.

If, for some reason, I can’t activate this site due to access, I will attempt to activate K-1808 (Cass Scenic Railroad State Park) instead. Both are rare.

If time allows, I’ll attempt both!

Portable, QRP, QRP Radios, Software Defined Radio

Initial impressions of the ALT-512 QRP transceiver

Leave a comment

(Note: This is a cross-post from my other radio blog, the SWLing Post.)

So the ALT-512 QRP SDR transceiver has landed at SWLing Post HQ. This little rig is on loan from Aerial-51 and I’ll be spending the next month or so putting it through the paces.

I can already tell that the ALT-512 has some strong points:

  • It’s incredibly portable and easy to take to the field, providing you have a battery and resonant antenna (or external ATU).
  • The color backlit display is quite readable at any angle despite being rather information-dense.
  • I really like the waterfall display. It’s large enough to be quite useful.
  • The ALT-512 can connect directly to your computer for digital modes like FT-8. No external sound card needed.
  • The menu system contains a wide array of features and options for granular tweaks and modifications.
  • The ALT-512 includes the European 4 meter band.
  • Although I prefer using headphones with small radios, the ALT-512’s small internal speaker does a fine job.
  • Rob Sherwood tested the ALT-512 (indeed, this very unit) recently and added it to his receiver test data. It performed quite well especially considering the price.

Any negatives so far?  Nothing major:

  • No internal ATU or battery options. At this price point (799 EUR), I wouldn’t expect either of these.
  • The ALT-512 is not general coverage. This is a negative for those of us who like SWLing, but a positive for ham radio use as the ALT-512 sports band-specific bandpass filters to reject out-of-band strong stations. You can tune to some stations above the 40M band and also the full mediumwave band and below (down to 100 kHz), although I wouldn’t expect stellar performance in those regions.

So far, I’m very pleased with the ALT-512’s performance.

Next, I’ll be taking it to the field and see how easily I can activate a few POTA (Parks On The Air) sites! Stay tuned!

Click here to check out the ALT-512 at Aerial-51.

Grab And Go, News, Portable, Product Announcements, QRP, QRP Radios, Software Defined Radio

Icom Introduces the IC-705 portable QRP transceiver

7 Comments

Note: this is a cross-post from our other radio blog, the SWLing Post.

This weekend at Tokyo’s Ham Fair 2019, Icom announced an innovative transceiver to their line-up: the Icom IC-705 QRP transceiver.

The IC-705 introduces several industry firsts for a backpack portable radio:

  • It uses the same BP-272 Li-ion Battery pack as the ID-51 and ID-31 series D-Star handy talkies. To my knowledge, this is the only HF transceiver that uses battery packs that can be swapped so easily in the field–like one would swap an HT battery pack
  • It has a general coverage receiver that spans a whopping 0.5 to 148 MHz
  • It sports a full color, touch screen with spectrum and waterfall displays
  • It includes the D-Star digital voice mode
  • A GPS receiver
  • Bluetooth connectivity
  • A MicroSD card slot for memory storage, screen captures and recordings

All of this appears to be included, not add-on options.

The only IC-705 omission, in my opinion, is an internal ATU (antenna tuner). Something I would have expected, but not a deal-breaker for those of us who could really benefit from the amount of features this radio offers.

Side and back panel view noting ports and connections.

There is no word yet on pricing or availability, but you can count on us to post these details once they’re available. If you would like to follow updates, bookmark the tag: IC-705

We will also review on the Icom IC-705 as soon as it’s available.

Video from Amateur Logic/Ham College

Ray Novak (N9JA) with Icom America did a live video interview with Amateur Logic/Ham College TV yesterday. The video includes a full announcement in English from the Icom Booth:

Click here to view on YouTube.

IC-705 Pre-Release brochure

Many thanks to Ray Novak for snapping a few photos of the pre-release brochure:

Update: click here to download the full IC-705 brochure. Hat tip to Dave Zantow!

A surprise from one of the “Big Three”

The “Big Three” transceiver manufactures–Icom, Yaesu and Kenwood–have not shown a lot of interest in backpackable QRP radios over the past two decades.

By “backpackable” I mean QRP transceivers specifically designed for portable use in the field–radios that typically have built-in battery options, internal ATUs, and designed to be lightweight shack-in-a-box units.

Yaesu introduced the FT-817 almost twenty years ago and it lives on today (with modest upgrades) as the FT-818. Kenwood has no portable/backpackable HF QRP radio at this point.

I bet the IC-705 is being introduced today because Icom sees a strong market among field-portable operators who enjoy travel and outdoor radio activities like SOTA (Summits On The Air) and POTA (Parks On The Air).  In addition, many ham radio operators live in neighborhoods that are either plagued with radio interference (RFI) or don’t allow antennas to be installed outdoors. Portable radios liberate ham radio ops from their shacks and allow them to set up a station far away from noise or home owner’s associations.

Looking forward…

Again, I’ll be in touch with Icom about the IC-705 and will share updates here when they’re available. I’m looking forward to evaluation this rig when it hits the market!

Do you enjoy QRPer and the SWLing Post?

Please consider supporting us via Patreon or our Coffee Fund!

Your support makes articles like this one possible. Thank you!

Announcements, News, Portable, Product Announcements, QRP Radios

The Discovery TX-500 QRP Transceiver

Leave a comment

Please note: This is a cross-post from our other radio site, the SWLing Post.

Many thanks to SWLing Post contributor, Vlad, who shares some images and a video of a new QRP transceiver in development: the Discovery TX-500 by a company called lab599.

Specifications have not been published yet, but we have confirmed a few details from the manufacturer:

  • 10 watts PEP
  • HF plus 6 meters
  • Weight 570 grams (1.25 pounds)
  • Voltage 9 – 14 VDC
  • 105 milliamps at 13.8 VDC and with backlit display on
  • CAT control via USB and using Kenwood codes
  • I/Q outputs
  • Weatherized
  • Expected availability autumn 2019
  • Target retail price is $700 US
  • Product website is forthcoming

All of the following images came from the Discovery TX-500 gallery on Instagram:

Here are a few videos:

Click here to view on Instagram.

Click here to view on Instagram.

Click here to view on Instagram.

For someone, like me, who loves playing radio in the field (Parks On The Air and Summits On The Air) this looks like an ideal rig. It’s one of the only ham radio transceivers I’ve seen that is weatherized to some degree (how much, we don’t know yet).

I don’t see a speaker on the TX-500, so I’m guessing it might require a mic/speaker combo or an external speaker of some sort? I also don’t see a built-in ATU, but at $700, I certainly wouldn’t expect one.

With a power consumption of 110 milliamps at 13.8 VDC, this little transceiver should run for ages on a modest battery pack.

This is certainly a fascinating prototype QRP transceiver. If the Discovery TX-500 transceiver can be produced and marketed at $700 with all of the features mentioned so far, it should certainly fly off the shelves. They can certainly take my money!

Of course, I will plan to grab one of these for review. I’m also eager to see how this little SDR transceiver might perform on the broadcast bands.

We will post post TX-500 updates and details as they become available. Bookmark the tag Discovery TX-500 and stay tuned!

Do you enjoy QRPer.com?

Please consider supporting us via Patreon or our Coffee Fund!

Your support makes articles like this one possible. Thank you!