Category Archives: Field Reports

Field Radio Kits, Field Reports, Guest Posts, News, Portable, POTA, QRP

Field Radio Kit Gallery: N5FY’S Elecraft KX1 Minimal CW Kit

5 Comments

Many thanks to Joshua (N5FY) who shares the following article about his KX1 portable field radio kit which will be featured on our Field Kit Gallery page. If you would like to share your field kit with the QRPer community, read this post. 

N5FY’S Elecraft KX1 Minimal CW Kit

by Joshua (N5FY)

I started operating CW this past August and am having a blast! One great thing, or maybe its a bit of a problem for the budget, is that when you can work CW, there is a whole new world of HF radios to collect…I mean operate!

Not to mention the ability to pack out a small portable kit that can be thrown in a bag at the last minute when headed out the door. I have a few such kits but lacked a throw line for each. So, I picked up some more Arborist Throw Line from Atwood Rope Manufacture so I could finish out the first kit.

I just snagged a used, inoperable, KXPD1 paddle to complete my KX1 radio. I had to rebuild the jack on the key but did so in quick order and decided to make it out to my local park for a POTA activation. My plan was to finish up the kit with the throw line and then test out the new complete kit. Suffice to say, all went well!

N5FY Beautiful Morning View with the KX1

The KX1, now out of production, has been a pleasure to operate CW with. This unit has the internal ATU option, 6xAA battery pack, and I updated the internals to add 80 and 30m. So this rig will run 20/30/40/80m.

There are 2 message memories, built in keyer, and even includes RF, AF, and bandwidth knobs for quick adjustment while operating. I’m no experienced CW operator, but this rig is hard to beat in my opinion. Then again, my KH1 hasn’t show up yet!

N5FY KX1 Complete Compact Kit

The antenna of choice here is my Tufteln 2 Wire No Transformer with a 41ft radiator and 17ft counterpoise. The internal ATU makes working 20, 30, and 40m simple and with no coax needed. I would use a much longer wire if I needed to work 80m. This antenna packs away very nice and not needing the Coax is a space saver. I have one version or another of my QRP antennas in each of my radio kits! 

N5FY KX1 Complete Compact Kit Packed

Packing a kit with no room to spare is almost like playing Tetris. I have a good bit of gear from Go Ruck, its all fantastic. For this kit, the 3L would leave a bit more space for some additional gear. If you are looking for some pockets as well, I like the GR2 Field Pocket. For this KX1 though, with the cover installed, I happed to forgo the bit of extra protection for the lightweight small size.

N5FY KX1 Complete Compact Kit Closed Up with Pencil for Size Reference

Next Kit to finish up is the KX2 and TX-500. Both just lack the throw line.

Joshua N5FY, 72

Field Reports, News, Pedestrian Mobile, Portable, POTA, QRP, Videos

Elecraft KH1: A Quickie Pedestrian Mobile POTA Activation!

18 Comments

Thursday, November 9, 2023 was a typical “dad taxi” day for me.

By the time I got around to doing a POTA activation that afternoon (which was always on the docket) it was within 30 minutes of when I needed to pick up my daughters.

Fortunately, the Blue Ridge Parkway Folk Art Center was en route to town.

I had planned that day to pair up my Elecraft KH1 with a random wire antenna, but looking at the time, I realized that was being a little ambitious–the few minutes to deploy and pack up the antenna would cut into the activation.

Instead (since I had just received my KH1 logging tray/cover) I decided to put it to the test with a real pedestrian mobile activation using the KH1, its  whip antenna, the logging sheets I printed/cut, and the teeny space pen included with the logging tray. In theory, this all looked doable, but in practice I didn’t know if I would actually be able to log on a tray attached to the side of my radio!

I had planned to use my Zoom H1n recorder for the KH1 audio since I would be making an activation video (see below), but frankly, I simply didn’t have time to set it up. I had to make do with the KH1 wee speaker.

Speaking of the speaker…

After playing with the speaker for a few weeks now, I’ve found that it sounds much better when I run the KH1 with a wide CW filter.

I’d always assumed being a low-fidelity 1″ speaker that narrow audio would be best, but I was wrong about that. In the field, I tinker with the filter and attenuation settings for the best audio balance.

Still, it’s not perfect (the speaker is really a “bonus” feature) but it’s much improved over my initial POTA activation.

Of course, I would have been using earphones had I not been recording the activation on camera. Via earphones, the KH1 audio is excellent!

Gear:

Note: All Amazon links are affiliate links that support QRPer.com at no cost to you.

On The Air

I hopped on the air, started calling CQ POTA, and the stations started rolling in. Continue reading Elecraft KH1: A Quickie Pedestrian Mobile POTA Activation! →

Field Reports, News, Portable, POTA, Stealth, Travel, Videos

KX2/AX1 Travel: Two Quick POTA Activations on the South Carolina coast!

6 Comments

SC Coast: A Postcard Field Report

When life gets busy (it is now) I don’t always have the time to produce a full field report. This is especially the case when I have, not one, but two field reports and two activation videos!

This “Postcard” field report covers two activations on the evening of October 2, 2023. At the time, I was staying on the coast of South Carolina for a night. (You might recall I activated Lee State Park with friends earlier that afternoon.)

Instead of producing two full-format field reports, this will be one report with two activations.

Note that I used the same gear for both of these activations.

Gear:

Note: All Amazon links are affiliate links that support QRPer.com at no cost to you.

Myrtle Beach State Park (K-2907)

I arrived at my hotel in South Myrtle Beach around 17:30 local. I checked in (thank you, Hampton Inn for the room upgrade!), dropped off my bag in the room, then immediately made my way to what turned out to be my first of two parks.

As I purchased my park ticket at the entrance gate, the park employee told me that my ticket would also allow me into Huntington State Park (just 20 minutes down the road) until end of day.

At that point, I had no intention of hitting a second park…but of course I just couldn’t resist the temptation of that free entry!

I know that some South Carolina parks are picky about antenna deployments, etc. so I stuck with my low-impact, low-profile combo of the Elecraft KX2 and AX1. It doesn’t disturb the trees, the ground, nor any park visitors.

I parked at the pier and set up at a picnic area under the trees nearby. Early October is very much off-season on the coast, so the park was relatively quiet.

There was no one else in the picnic area, so I had the place to myself. Continue reading KX2/AX1 Travel: Two Quick POTA Activations on the South Carolina coast! →

Field Reports, Morse Code, News, Portable, POTA, QRP, Stealth, Travel

DITs and DAHs from Alcatraz

17 Comments

DITs and DAHs from Alcatraz

by Leo (DL2COM)

San Francisco Radio Diary – Part 1

“No way!” I said to myself when I saw that Alcatraz Island is an official Parks-on-the-air (POTA) reference which has only been activated four times by two operators.

Alcatraz Island
Alcatraz Island / POTA reference K-7888 & 2fer K-0647

It surprised me that such a historically relevant site hasn’t seen more ham radio activity in the past – or maybe it has, just not for POTA. I then got super excited as I was packing my bags for San Francisco.

I have missed this foggy beauty so much and it has been many years since I visited the city. I won’t bore you with the ordeal of our travel but it included canceled flights, multiple delays and rescheduling via Berlin and London the next day due to a hostage situation at Hamburg airport. So our already super short trip of 4.5 days shrunk into a good 3 days in SF. So which things to cross off the schedule now? It was clear that this unfortunate situation was certainly not going to eat into my activation budget. Hell no!

I admit since watching “The Rock” (1996) Alcatraz has always been a place of mystery and fascination to me. Those who are interested in reading more about the former fort, military prison and federal penitentiary can do so here.

After I learned that it was also a CW ATNO I instantly said: “Done deal. The ink is dry. I will activate with morse code in the shadows of Sean Connery, Nicolas Cage and Ed Harris”. Of course I would do it plain vanilla style throwing good ol’ wires in trees and staking pointy things in the ground. Yeah right. Sometimes passion does tend to carry you away a wee bit so a little later I gathered myself and started doing some research.

K-7888 log so far

Apparently the first POTA pioneer on Alcatraz was KC1MIJ who managed to get 5 QSOs in with an FM HT in July 2021. I’d say that’s pretty awesome for a location almost as low as sea level. The first successful activation was done on December 3rd 2021 by Elizabeth “Liz” N6LY and her husband Kevin K6YD. Since then both of them had only been back one time in December 2022 for another day to achieve a whopping cumulative 761 phone QSOs in only two days of total operation. Wow! What an achievement. No other hams have tried to activate Alcatraz since.

National Park Service Badge
The entire island is under management of the National Park Service (NPS)

I didn’t hesitate to write Liz an email and ask about her experience operating from the island as I knew it would probably require some preparation. The POTA website also stated that a permit from the National Park Service (NPS) is required. Luckily Liz replied swiftly with a lot of helpful information and I am very thankful for the email exchange. She specifically pointed out that it is in fact necessary to get a permit (even for simple HT activity) and that she had already applied in July for another day activity this coming December. They are still waiting to hear back from NPS’s office so it does seem quite hard to get approval for a “proper” activation. It is understandable that folks there want to have control over an organized operation where antennas, 100w radios, chairs etc. might need to be set up. With so many tourists visiting each day they also want to make sure that any activity doesn’t interfere with their core business especially on weekends.

Since I really didn’t want to spoil any of the hard preparatory work with NPS that Liz and Kevin had done for the ham radio community as well as respect local processes I wrote an email to the Alcatraz Rangers Office asking for a permit only a few days before my arrival. I knew it was a long shot and highly unlikely that they’d get back to me in time. So I called them every morning and afternoon the days after to follow up but was unsuccessful reaching them on any channel. By that point I had almost given up. However there were plenty of other options for activations so I had a blast in/on several SOTA/POTA references in SF which I will report on later.

Alcatraz Island Ferry
Alcatraz Island Ferry @ Pier 33

On our last day I woke up and thought “Man, I can’t just leave the Bay Area and not activate Alcatraz.” Since one of my appointments got canceled short-term I didn’t think long, jumped on an Uber to Pier 33 and off I was (yeeeees, online tickets were still available).  Continue reading DITs and DAHs from Alcatraz →

Field Reports, News, People, Portable, POTA, QRP, Travel, Videos

A welcome POTA layover with friends at Lee State Park in South Carolina

1 Comment

On September 30, 2023, my uncle Reggie passed away at the age of 83. I was incredibly fond of him. His funeral was to take place in Georgetown, South Carolina on Tuesday, October 3rd.

The funeral time was confirmed on Sunday evening (Oct 1), so I made all of my travel plans that night. I decided to leave early Monday morning and drive to Myrtle Beach where I’d reserved a hotel room for one night. I’d then attend the funeral the following day and drive back to my home in the mountains. Round trip, this would amount to about 12 hours of driving.

This, of course, was a pretty somber reason to take a road trip–although it would be nice to spend time with my SC family. I wanted to make the most of my travels and fit in a little “radio therapy” along the way. I glanced over the POTA map for a park that might make for a nice break from travels.

Before hitting the sack Sunday evening, I remembered that many months ago Keith (KY4KK) told me to give him a heads-up anytime I planned to pass by Florence, SC. I knew that Florence would be a simple detour on my journey, so I reached out to Keith and asked if he and his POTA buddies Tommy (N4GS) and Steve (W4JM) might, by some chance, be available for a quick POTA activation. Of course, this was very late notice.

Keith wrote back and recommended that I activate Lee State Park–he and Tommy were both available but, unfortunately, Steve had other plans.

Monday morning, I hit the road and arrived at Lee State Park in the early afternoon.

Lee State Park (K-2905)

I pulled into the park driveway and was greeted by a number of Halloween displays. Evidently, the park staff loves decorating for holidays.

At first glance, this looks like a POTA activator that never never got their ten logged.

I pulled into the visitor’s center parking lot and immediately met Keith and Tommy.

After a quick greeting, Keith said, “Thomas, our job here is to get you on the air as smoothly as possible so you can continue your trip.”

Keith, KY4KK (left) Tommy, N4GS (right)

Herein lies what I love about amateur radio and POTA specifically: even though Keith, Tommy, and I had only just met in person, they were instant friends.

I must say, Lee State Park is the perfect POTA park; there are loads of tall trees, covered picnic areas, open spaces, ample parking, and ham-friendly staff. It just doesn’t get better than this!

We walked to a large covered picnic area and Keith suggested that we deploy his 40 meter EFHW antenna.

I agreed without hesitation!

Unlike me, Keith is adept at using a slingshot to deploy his antennas.

As I started setting up the radio, Keith aimed his slingshot and snagged a really high branch on the first go. This 40M EFHW was being deployed as a vertical!

I decided to bring along my Penntek TR-45L on this trip. I’m glad I did: it was ideal for this sort of POTA activation! Continue reading A welcome POTA layover with friends at Lee State Park in South Carolina →

Field Reports, News, Portable, QRP, SOTA, Videos

Elecraft KH1 + Speaker Wire = Pileup Madness on Bakers Mountain!

11 Comments

Since the beginning of November, I’ve been pushing my Elecraft KH1 activations to the front of the line so that readers and subscribers who are considering this wee handheld radio might get a chance to see and hear it in action.

So far, I’ve used the KH1 for what it was designed to do: pedestrian mobile/handheld using the built-in whip antenna. I’ve activated a park, a summit, and even did a little parking lot POTA hunting.

I’ve decided that November is KH1 month–this is the only radio I’ll use this month.

I will start blending in some of my field reports from October (there were some really fun ones in there) that feature my other field radios and a variety of antennas starting next week. I’ll still be pushing some of my KH1 field reports to the front during that time as well. Also, I’ll likely post more bonus videos over on Patreon.

Where to activate?

On Monday, November 6, 2023, I had several hours in the afternoon to take the KH1 on another mini radio adventure. I wasn’t sure where I’d perform an activation, though.

This time, I didn’t want to do a pedestrian mobile activation. I wanted to see how the KH1 might play on my kneeboard and how it might pair with my 28.5′ speaker wire antenna. I was curious if its internal ATU would find acceptable matches on all bands.

I packed the KH1, throw line bag, Tufteln Kneeboard, Helinox chair, 2L water bag, camera gear, and speaker wire antenna in my GoRuck pack (FYI: all links and full inventory are below).

This was more gear than I’d need, but all of these items were in my radio box in the trunk/boot of my car.

I had only one errand to run that afternoon: I needed to drop off some of my wife’s illustrated Christmas cards at my friend Hamilton William’s Gallery in downtown Morganton.

After catching up with Hamilton, I had to make a decision about where to go for an activation. I knew this: it was an incredibly beautiful day, so whatever I did, it needed to include a hike!

I considered a few parks but the most convenient spot for a proper hike was Bakers Mountain. It also required the least amount of driving since it was essentially on the way back to Hickory.

Bakers Mountain (W4C/WP-007)

It being an early Monday afternoon, there weren’t many other hikers at Bakers Mountain. In fact, I never ran into any other hikers on the main loop trail.

Bakers Mountain park is (sadly) not a POTA entity. It’s a county park, so does not currently qualify. There was talk once of Bakers Mountain being turned into a state park, but it falls just shy of the amount of acreage needed to qualify.

Bakers Mountain is a one point SOTA summit, but the hike (if you do the full loop trail) is actually pretty strenuous if you take it at a nice clip. I’d consider it a moderate hike overall.

I’ve already activated Bakers Mountain this year, so this activation’s point will not add to my goal of reaching Mountain Goat (1,000 points). That’s okay, though. Unless my family life changes in a way that frees up a lot more time, Mountain Goat is a good 5-6 years in the future at my pace! I’m perfectly fine with that.

I reached the summit and found a spot to set up in the shade. Continue reading Elecraft KH1 + Speaker Wire = Pileup Madness on Bakers Mountain! →

Field Reports, Guest Posts, Morse Code, News, Portable, POTA, QRPp

Guest Post: W8GM’s CW QRP Journey Begins

25 Comments

Many thanks to David (W8GM) for sharing the following guest post:

My CW QRP Journey Begins

by David (W8GM)

It is not really a beginning but for some reason it feels like it.

This a summary of my second ever CW QRP POTA activation which includes a summary of my radio path to this point and a unique encounter that shows how amateur radio operators can be so separated by distance but still somehow manage to build and maintain a sense of community.

Life can sometimes be so strange. I had an interest in amateur radio some 30 years ago but what stopped me? Morse Code.

No way would I learn a dead language so I could talk on a radio! Fast forward to the fall of 2021 when I discovered there was no longer a code requirement to become licensed.

It happened fast. I took the tests, explored the bands from 70cm to 80m and simply felt my way around amateur radio. I discovered POTA and I activated my first park on January 2nd, 2022. I have enjoyed camping, hiking and the outdoors my entire life and I realized that POTA had the potential to bring the outdoors and amateur radio together. However, I was simply a weekend POTA warrior. Most of my activations were from a car or sitting at a picnic table while I was camping.

During this time, I discovered websites such as QRPer.com and The Long Island CW Club and I watched oodles of videos of people combining hiking or remote camping with small radios and practicing amateur radio. I was jealous. However, I knew I only needed to put the pieces of the puzzle together and I could be like those YouTubers I was jealous of.

So really, this is where the journey began. I joined LICW completely ignorant of what a wealth of CW information and education this club offers. I soaked up a lot of that education and continued to follow the QRPers of the world.

Unfortunately, in June of 2022, I took off a full year from amateur radio. But in July of 2023 I was able to return, and I resumed my QRP goals. Once again LICW was there to support me and what follows is the story of my second ever CW QRP POTA activation.

Activation time

I pulled into my parking spot thinking “Wow, I’ve been coming here for over 15 years.” That thought quickly disappeared when I looked at my dash and saw it was 26 degrees Fahrenheit. Southwest Michigan’s first cold week of fall. I grabbed my pack and started heading to my secret spot.

My plan was to set up and then explore the woods most of the morning. Hiking around would keep me warm through the cold morning and I’d try to play radio in the afternoon after it had warmed up a bit. I arrived at my spot and, once again, I found it undisturbed. My leftover firewood was still sitting there in a neat pile. Over the last 15 years I have come here countless times, for as short as an hour and as long as 3 days and never once has anyone disturbed my little 20-foot patch of earth.

I set up my coffee kit, chair, antenna, and radio kit. I used a Packtenna 40m EFHW for an antenna and hung it in a sloper configuration. I did it just like all those QRPing YouTubers do it. I tossed a weighted throw line in the air and had the high end up about 40 feet. The radio was an Icom IC-705 and I put an Elecraft T1 ATU tuner in line for some extra insurance. I plugged in my cwmorse.us paddle and battery pack and I was good to go. But first I headed off to do some exploring before I returned and powered up the radio.

After getting back from exploring, I was ready for some coffee and that was made next. I powered up the radio and thought I’d try starting out on 10 meters. I had learned that a huge advantage of CW is you can be auto spotted on the POTA page. Cell reception at my spot is hit and miss. Some days it is there and others you have nothing but SOS on your phone.

No worries about spotting today. CW wins again.

I called CQ for quite some time and was starting to get nervous until a faint station broke through. And of course, it was the last thing a rookie CW operator needs. The call sign was wrong, or I was failing. Continue reading Guest Post: W8GM’s CW QRP Journey Begins →

Field Reports, New Products, News, Portable, POTA, QRP, QRP Radios, SOTA, Videos

My first SOTA activation with the new Elecraft KH1 handheld QRP transceiver!

14 Comments

On Friday, November 3, 2023, I had planned to activate Mount Mitchell–the highest summit in eastern North America. I need to activate Mitchell soon because I’ve yet to activate it for SOTA in 2023 and when winter weather sets in (quite early at that altitude) the park is inaccessible.

Unfortunately, last week, the National Park Service closed an 8 mile portion of the Blue Ridge Parkway due to (no kidding) park visitors feeding and trying to hold bears at the Lane Pinnacle Overlook.

I won’t get on my soapbox about how people are so out of touch with nature that they feel human interaction with bears is a good thing. It breaks my heart because as we natives of WNC say, “a fed bear is a dead bear.” Bears that become comfortable with humans become (at best) a nuisance and (at worst) aggressive.  This is bad for people and it’s bad for our bears who are otherwise shy and avoid humans.

Okay, I said I wouldn’t soapbox about this…

That 8 mile section being closed meant that what would have been a 50 minute drive to the summit of Mitchell turned into a 90 minute drive. Round trip, I simply couldn’t fit that in my day, so I made alternate plans.

Another summit on my list to activate before year’s end was Richland Balsam.

Richland Balsam is actually the highest summit on the Blue Ridge Parkway and is, in fact, at one of my favorite points along the parkway.

That  Friday morning, I dropped my daughters off at their classes and drove an hour or so to the Haywood-Jackson Overlook.

In the valley, as I started my drive to the parkway, past the Cradle of Forestry, it was 30F/-1C. I was concerned that on the summit–nearly 4,000′ higher in elevation–that the temp would be closer to 20F. Fortunately for me, as I gained elevation, the temperature climbed too. We were having inversion that day so the higher altitudes were actually warmer than lower altitudes. This is not uncommon in the fall and was very welcome that particular Friday morning!

Richland Balsam (W4C/WM-003)

Only three weeks earlier, there would have been no free parking spots at the Haywood-Jackson Overlook overlook–it would have been packed.

Fortunately for me, all of the leaf-lookers had gone and I literally had the place to myself. What a luxury!

And the temperature? A balmy 43F/6C.

The hike to Richland Balsam is one of the easiest along the parkway.

At the north side of the parking area, you’ll see a trailhead for the Richland Balsam Nature Loop Trail.

I wish my iPhone camera could haver truly captured how the moon looked in the sky.

The trail isn’t long; I believe the entire loop is just shy of 1.5 miles.

Although I didn’t set out to do this, I ended up making a video of the entire loop trail hike along with the activation (of course, you can skip over those parts in my activation video below).

Sadly, one thing you won’t be able to enjoy in my video? The smell. The air is filled with the fragrance of balsam trees along the entire trail–it’s just amazing!

The summit of Richland Balsam is at 6,410 feet ASL (1,954 meters).

The summit is covered in trees which is brilliant for SOTA activators. Another luxury is that there are two benches within the activation zone. I did pack my Helinox Zero chair as a backup, but didn’t need it.

SOTA with the KH1

Setting up my KH1 for a SOTA activation couldn’t be easier or faster. I show the whole process in my video at a very casual pace. Continue reading My first SOTA activation with the new Elecraft KH1 handheld QRP transceiver! →

Field Reports, Guest Posts, News, Portable, POTA, QRP, Travel

POTA Field Report: Andrea Activates Two Iconic Cold War Sites

9 Comments

Many thanks to Andrea (IW0HK) who shares the following field report:

Cold War POTA in Berlin

by Andrea (IW0HK)

In the last week of October, I found myself in Berlin for a work commitment.

Taking advantage of two half-days off, I wanted to combine two of my great passions: radio and the history of the Cold War. I chose to visit two historical sites that also serve as a reference point for the POTA (Parks on the Air) ham radio program, allowing me to transmit with my radio in these unique locations.

The first location is a park located about a kilometer away from where I worked for a week, the headquarters of RBB, the public radio and television of Berlin and Brandenburg. This park is Teufelsberg, which literally means the Devil’s Mountain. It is an artificial hill in Berlin, created using the rubble from World War II, located within the Grunewald forest (POTA reference DA-0218).

On this hill, the Teufelsberg listening station of the American NSA in Berlin was situated, which was used to intercept radio signals from East Germany during the Cold War.

Today, you can still see the remains of the antenna covers of the listening base. I activated the Pota park that has been established around the abandoned base, and I was delighted to transmit my signals in Morse code (CW) in QRP mode in this historically significant place.


I used the small QMX transceiver from QRP Labs, a gem for operating in FT8/CW modes on the 80/60/40/30/20 meter bands.

For an antenna, I used a 20-meter wire connected to an EFHW 49:1 balun, hung above a tree. Amid families flying kites, I made 15 CW QSOs, which allowed me to validate the park activation. The program requires a minimum of 10 QSOs for activation to be valid.

The second activation took place in another symbol of the Cold War: the runway of the former Tempelhof airport. I activated this as a POTA site and transmitted CW QRP with the small QMX transceiver from QRP Labs in the fog and cold.

The Berlin-Tempelhof Airport was an airport located in the southern part of the central Tempelhof-Schöneberg district and was operational from 1923 to 2008.

It is famous for hosting the Berlin Airlift base (1948-1949), which was an incredible operation undertaken during the Cold War by the United States and their Western European allies to transport food and other essential supplies to West Berlin, surrounded by the Soviets.

Today, the airport is closed, and its runway has become a massive park (POTA reference DA-0169) used by Berliners for various outdoor activities. I activated it early in the morning on a gray and cold day, setting up my EFHW antenna practically on the runway.

Again, I used only CW, and in no time, I reached the number of 11 QSOs. The cold made me stop the activity earlier than planned, but the activation is still valid. After concluding the transmissions, I walked through the enormous park, imagining its past use and appreciating how often my amateur radio passion leads me to incredible places.

This was the first test of this “minimal” POTA kit with the QMX transceiver, the 20-meter EfHw antenna, and the XTPower XT-16000QC3 12v power bank.

I must say that the test was successful. This is an excellent little radio that I want to use and take with me on every work trip. The POTA program continually takes me to incredible places, both in terms of nature and history, as it did in this case in Berlin

Field Reports, News, Portable, QRP, QRP Radios, Reviews, Videos

My First POTA Activation with the New Elecraft KH1 Handheld QRP Transceiver!

30 Comments

Yesterday, I posted some initial notes about the Elecraft KH1 and mentioned that I hoped to perform a POTA activation later in the day.

I’m pleased to report that I was able to fit in that activation!

I’m pushing this report and video to the front of the line because so many readers are eager to see how the KH1 performs during a field activation. Instead of focusing on the park, in this field report we’ll be taking a closer look at the KH1 and my initial impressions after performing a pedestrian mobile POTA activation with it.

Packing the KH1

I had a very hectic schedule yesterday and was on the road in/around Asheville from 8:00AM to 2:00PM before an opportunity opened to fit in an activation.

After a quick trip back to the QTH for lunch, I packed the Elecraft KH1 field kit in my EDC pack (a travel laptop bag).

Herein lies my first impression of the KH1: even though I knew I had packed the entire kit, I felt like I must have been leaving something behind.

Sounds funny, but even though I pride myself on making fully self-contained field radio kits, I felt like there must have be something else I needed. The KH1 field kit just seemed too small, too lightweight, and too compact to have included everything I needed for an activation.

Intellectually, I knew that it included everything needed, but I still did a mental inventory:

  1. Radio? Check.
  2. Antenna? Check.
  3. ATU? Check.
  4. Paddles? Check.
  5. Battery? Check.
  6. Counterpoise? Check.
  7. Log book and pencil? Check.

Hard to believe, but it was all there.

Trust me: the first time you take your KH1 to the field, I bet you’ll feel the same way I did.

Blue Ridge Parkway (K-3378)

Because I was so short on time, I decided to activate the Blue Ridge Parkway which is the most convenient POTA entity when I travel into Asheville from Swannanoa.

It was cold and blustery afternoon the afternoon of November 1, 2023. At my QTH, I checked the temperature and it was about 34F. I knew it would be a bit warmer in town which is a good 1,000 feet lower in elevation, but I still grabbed my gloves on the way out the door. Glad I did!

As I mention in the activation video below, I wasn’t exactly on my “A Game.” I had received a couple of vaccines the previous day and my body was a bit achy as if I was starting to get the flu. But, of course, I wasn’t. Still… I didn’t feel 100%.

I arrived on site and set up couldn’t have been easier:

  1. Open the KH1 pack
  2. Remove the KH1
  3. Attach the counterpoise and string out on ground
  4. Remove whip from clips and attach to top of KH1
  5. Extend whip
  6. Turn on radio
  7. Find a clear frequency
  8. Hit the ATU button for a 1:1 match!

We’re talking a 30 second process even for someone who moves slowly.

Important notes about my KH1

Keep in mind the following notes that are relevant at time of posting this field report (November 2, 2023):

  • I am waiting on a firmware update to add:
    • CW Message Memories
    • CW Decoding
    • Internal Logging
  • I purchased the full “Edgewood” package but I don’t yet have my logging tray/cover yet. Elecraft plans to ship this within the next few days.
  • My KH1 is a very early serial number because I’m in the volunteer testing group.

The KH1 Speaker

The KH1 internal speaker is located on the bottom of the radio between the AF Gain and Encoder knobs.

I consider the Elecraft KH1 speaker to be a “bonus” feature. The speaker is small (1.1 x 0.65”) and limited in fidelity.

I had planned to connect my Zoom digital recorder to the KH1 and record audio directly from the headphone port during this activation. Continue reading My First POTA Activation with the New Elecraft KH1 Handheld QRP Transceiver! →