Category Archives: Morse Code

Morse Code, News, QRPers

From reluctance to devotion: Terry’s journey into the rewarding world of CW

28 Comments

Many thanks to Terry (N7TB) who shares the following article:

My CW Journey

by Terry (N7TB)

For many U.S. hams who were licensed before 2007, we had to learn CW at 5 wpm as a Novice or Tech, 13 wpm for a General license and 20 wpm for Extra.   Many learned CW at a young age and have used CW since then.  It and ham radio are synonymous for them.  For many of them, that is the only mode they have used for years.

For me, my experience is quite different.

In 1982 I decided to get my ham license.   I bought a Kenwood TS-520S, DG-5 digital display, a 45 ft tower, and a large Cushcraft ATB-34 beam even before I had my novice license: all for $350, a bargain even then (my wife wasn’t convinced).  I still had the beam and tower until 7 years ago.  In 1982 I had all the gear to work DX using SSB and it seemed to me to be the way to do it.  So as a result, I stayed with SSB for decades.  Right after I got my license, several ham friends urged me to continue using CW and even invited me to join their weekly CW group to gain confidence and skill.  I had absolutely no interest.  Several kept at me for years!

I don’t know what causes the “spark” that happens for a person to not only want to learn, or relearn CW as I did, but to also do everything necessary to become proficient.  That happened to me when I was 69 years old.

I had tired of SSB and was getting bored with ham radio.  I was looking for a new challenge.  I decided to see if I could relearn the CW that I had largely forgotten 35 years before.  The same friends who urged me to join their group so long ago, welcomed me.  Over the first few years I joined them, my confidence and speed increased.  Unlike the first time I learned CW, they urged me to not write down anything but to listen to the sound and translate the letters in my head.   It was slower than writing it down at first, but it paid dividends later.  They all were patient and slowed down for me and increased speed as my skills improved.  I still join them every week.  They are some of my best friends.  We are spread out in WA and OR.  On Wednesday mornings we have a QRPP net where we operate 1 watt CW and most of the time we can all hear each other.  We never go over 5 watts.

Because I learned CW late in life, I have an appreciation and joy of CW that is hard to describe.  It is the greatest joy in ham radio I have ever experienced.

This week, I activated Willamette Mission State Park in Oregon with a wire in a tree and 5 watts from my KX2.  I worked 44 contacts, most East of the Mississippi.  There are few things that give me as much joy as copying and sending CW.   It represents 99.9 percent of all my ham contacts for the last 6 years.

When that day came almost 3 years ago, when I had finished a CW ragchew and was thinking about what was discussed and realized that I never said anything verbally, that my brain had effortlessly translated dit and dah sounds into language and could not tell the difference between speech and CW, I knew I had finally reached my goal of communicating in CW as effortlessly as talking.  I will never forget that moment!   I was 72 years old.  Three years of almost daily work for at least an hour on CW finally got me there.  I think it takes longer the older one is when they start.

I guess I could say that CW has become my passion.   I don’t know if I would have felt the same way if I had learned it as young man as many hams did in the day.  Because I hated CW for so many years and had such frustrations with it, to find myself loving the mode now is an amazing thing.

In a few weeks, I will get the DXCC wallpaper for over 100 CW DX contacts.  That, in itself, is almost surreal to me given my history of avoiding CW for so many years.  I actually wasn’t working toward it, it just happened because of the ease of confirming contacts through LOTW.  My logging software does it for me automatically.  Nonetheless, I will take great pride in it because of how much effort it took to become proficient in CW.  If someone had told me in 1985 that I would one day achieve DXCC in CW mode, I would have said they were crazy!

I am mentoring several people now as they learn CW.  It is exciting to see them progress.  It is fun to share in their successes and encourage them as they deal with some of the same things I dealt with.

The thing that has always amazed me and something that I have tried to communicate to those I am working with is that there comes a magical moment when the difficulty of learning CW melts away and all of a sudden you can copy 25-30+ wpm with little to no more effort.  Many of you can relate to what I am saying.  It’s like a switch is flipped and you will never not be able to effortlessly communicate in CW again.

I will always be grateful to those who helped me on those many weekly hour-long CW chats.  That was the key that opened a world that I never knew existed and one in which I will treasure for the rest of my life.

I share this story with you because I know there are others who read Thomas’s blog, striving to become proficient in CW and wonder if they will ever “get it.”  You will if you keep at it, and when that magic moment arrives for you when CW becomes effortless, you will have the satisfaction of doing something that so few hams are willing to do.  It is worth all the work you put into it!    I wish you the greatest success in achieving CW proficiency!

Very 72 and 73,

Terry, N7TB

Field Reports, Morse Code, News, Portable, POTA, QRP, Videos

QRP POTA from 10 to 20 Meters with the Chameleon Tactical Delta Loop and Icom IC-705

5 Comments

I do my best to shake up each field activation I perform. Even if in some small way.

While it would be way more efficient to deploy the same radio and antenna combination at each park and summit I visit, I get a thrill out of trying different radio and antenna combinations.

I should add that I’m fully aware how fortunate I am to have a lot of radios and even more antennas to pair in various combinations. I keep reminding myself that building and buying radios and antennas is still cheaper than restoring a 1940s era Willys CJ-2A.

Recently, a reader reached out and asked my opinion about the Chameleon Tactical Delta Loop (CHA TDL) antenna. I think the TDL is a brilliant antenna system, actually, and the one I recommend the most from Chameleon because of its versatility.

Not only can it be deployed as a multi-band vertical delta loop but it has all of the parts needed to be an MPAS Lite vertical as well, save the counterpoise.

The CHA TDL comes with a 25 foot wire that connects the two 17′ whips into a loop configuration, but the clamps on the end of that wire can’t connect to the ground lug on the MPAS ground spike terminal as-is. That said, you could easily make a short connector cable or connection point that would allow the CHA TDL wire to clamp to the ground spike terminal. Else, of course, you could cut a dedicated 25′ counterpoise from pretty much any wire you might have around the shack.

You can buy the same counterpoise used with the MPAS Lite package, but it’s more affordable just to build your own since there’s no magic in the counterpoise. And, FYI, configured as the delta loop, there’s no need for a separate counterpoise; only if you configure it as a vertical.

This same reader also has an Icom IC-705 and an mAT-705 Plus antenna tuner. He was curious how well that combo might work with the CHA TDL. I knew that the combo would work well, but I thought, “why not try it?”

I realized that it has been ages since I last deployed the CHA TDL in the field.

Zebulon B. Vance Birthplace (K-6856)

Tuesday, February 28, 2023, was a gorgeous day weather-wise, although it was a bit gusty at times.

I arrived at K-6856 and decided to film the full set-up of the CHA-TDL.

For an antenna with a fairly large profile when deployed, it’s actually very compact, albeit a bit heavy (mainly due to the weight of the solid stainless ground spike and TDL hub). That said, I did take this same CHA TDL setup on an 11 mile round-trip SOTA hike once and didn’t find it too heavy.

I placed my Icom IC-705 on the table in the picnic shelter and connected the mAT-705 to it with a 2′ BNC-BCN RG-316 cable and the ATU control cable. Continue reading QRP POTA from 10 to 20 Meters with the Chameleon Tactical Delta Loop and Icom IC-705 →

Guest Posts, Hacks and Hints, How To, Morse Code, News, QRP

Bob pairs his ATS-20 with the Zachtek “Flea” CW transmitter

5 Comments

Many thanks to Bob (K7ZB) who shares the following guest post:

ATS-20 configured with Zachtek “Flea” CW transmitter

The ATS-20 in HF CW Transceiver Mode

by Bob Houf (K7ZB)

I picked up an ATS-20 last summer and played with it on SWBC and the ham bands but found the telescoping whip antenna to be marginal.

The unit I purchased from Amazon turned out to be solid: no problems have surfaced after 9 months of intermittent listening. By default, I have enjoyed it primarily listening to FM in my office.

When I used my long wire antenna, the performance on shortwave greatly improved – easy copy of DX and the value of the receiver began to impress me.

Recently I came across a Swedish ham who co-developed a line of radios covering a broad range of WSPR and associated designs built to a very high standard.

Already having a WSPR setup I was intrigued by a very low power CW transmitter that Zach co-developed with KB9RLW which puts out 300mW on 40, 30 and 20 meters at a price point that is less than the ATS-20, and – most interestingly – the design of the radio allows it to work in transceive mode with the receiver by providing a T/R switch when used with the proper SMA-BNC cable arrangement.

I bought a “Flea” and configured it with my ATS-20 then used an external antenna tuner to make sure the transmitter had close to a 1:1 SWR.  The “Flea” advertises that it is robust to high SWR and looking over the schematic that is evident, but for the sake of a trial I went with the ATU. Continue reading Bob pairs his ATS-20 with the Zachtek “Flea” CW transmitter →

Field Reports, Morse Code, News, Portable, POTA, QRP, Videos

A Casual 17 Meter POTA Activation with the Penntek TR-45L, PackTenna Random Wire, and a Furry Friend

5 Comments

On Sunday, February 19, 2023, I felt like I was moving in slow motion.

The previous day started early and I fit in a long hike, a SOTA/POTA activation, and a second park activation. Round trip driving time was about four hours, but it was worth it. I had an amazing time. Those field reports will be posted in the upcoming week.

The previous evening, I also participated in a live stream and after hours chat with Josh (KI6NAZ) on his amazing Ham Radio Crash Course channel. It was loads of fun, but I was up pretty late after a long day.

Sunday morning, I was feeling it and couldn’t decide if I wanted to do a POTA activation on the drive back to the QTH. In case I decided to, early that morning, I scheduled an activation at Table Rock Fish Hatchery with a very wide activation window. I often don’t have enough mobile phone service to self-spot at that particular site, so I decided that if I was able to make the activation, it would cover me.

I wasn’t even ten minutes into the drive home when I decided to go for the Table Rock activation, of course! I seem to never be too tired for some POTA!

I did make up my mind in advance to try to activate the park on 17 meters because 1.) there was a CW contest that weekend, and 2.) I wanted a more laid-back activation instead of a pileup. I figured 17 meters would have some activity, but not to the degree of the non-WARC bands.

Table Rock State Fish Hatchery (K-8012)

I decided to record the entire activation from set-up to pack-up so I grabbed the action camera from my radio bag in the passenger’s seat and started recording as I pulled into the site.

I had a lot of gear in the trunk/boot of my car–more than normal–because I brought along quite a few radio packs to show on the HRCC live stream for this trip.

I grabbed the Penntek TR-45L and PackTenna random wire.  I thought they would pair nicely for a casual POTA activation.

Set up

The great thing about the PackTenna random wire antenna is that the radiator is only 31′ long. It’s super easy to deploy. Continue reading A Casual 17 Meter POTA Activation with the Penntek TR-45L, PackTenna Random Wire, and a Furry Friend →

Field Reports, Morse Code, News, Portable, POTA, QRP, Videos

Postcard Field Report: Cheap POTA thrills with the TEN-TEC R4020 and Chelegance MC-750

5 Comments

Welcome to another Postcard Field Report!

My Postcard Field Reports are information-packed, just slightly more concise and distilled than my average field report so that I can publish them on a busy day.

T-T R4020

One of the least expensive radios I’ve ever purchased is my TEN-TEC R42020 two-band CW only radio. I believe I paid $120 for it (shipped!) a couple years ago and it sat on my shelf unnoticed for months until I took it on a POTA activation last year.

Here’s the admission:  I really love this little radio!

It is not a feature-rich radio, and the sidetone sounds like a 1080s handheld arcade game, but it works a charm! The receiver and audio are fantastic and it sports two of my most useful POTA/SOTA bands: 40 and 20 meters.

What’s not to love?

POTA time!

I had an early morning doctor’s appointment on Thursday, February 23, 2023. As a little reward  for doing my annual physical I decided to add a POTA activation to my morning. This was a last minute decision, so only a couple minutes before leaving the house that morning, I grabbed my TEN-TEC R4020, the Chelegance MC-750, and my Spec Ops Backpack (filled with all other field accessories), and I hit the road!

I chose the MC-750 that day because I needed an antenna that could be configured to be resonant on 40 meters since the R4020 has no internal ATU. That and I couldn’t remember if I’ve configured the MC-750 for 40 meters in the past. I know I’ve deployed the MC-750 with the 40M coil, but I think I may have used an ATU to match it.

I arrived at the Blue Ridge Parkway (K-3378 NC) mid-morning and set up in very short order. Continue reading Postcard Field Report: Cheap POTA thrills with the TEN-TEC R4020 and Chelegance MC-750 →

Field Reports, Guest Posts, Morse Code, News, Portable, QRP, SOTA

CQ From Latvia with Love

4 Comments

CQ From Latvia with Love

by Leo (DL2COM)

A completely under-prepped SOTA & WWFF activation which turned out to be perfect

In preparation for a tough conversation a good friend once told me: “You know what, just walk into the fire. If you have bad news to deliver, don’t sugar coat it and do it right away. You’ll be fine.” 

“Just walk into the fire.” I believe this can be applied to many other situations in life. While I would consider myself to be well-prepared on most trips, hikes and activations and getting a lot of joy out of optimizing my kits I try to stay open-minded. Imagine the things you would miss out on if you wouldn’t be spontaneous or only do things while fully prepared and 100% safe – even if it means taking risks.

On the road back to Riga
The QCX-Mini silently drying after a successful activation

Last Wednesday, I kind of walked into the fire. Not fire as in fire-fire but fire as in Latvian winter storm. In general this wouldn’t be such a big deal had I brought the right clothes, gear and shoes to my short business trip to Riga.

Due to very strict luggage restrictions I could only bring one small backpack for three days. Inside I had enough room for a laptop, washbag, spare clothes and the compact QCX-Mini Kit I built for exactly these occasions. I was wearing sneakers and jeans. At this point I had not planned a specific activation but I wanted at least to be able to operate YL/ & /p maybe 30 minutes from a nearby park – not a problem if you can jump right back into the warm hotel afterwards.

My rental car rocking summer tires in Winter (yes, I was driving veeeeeeery slowly)

During our stay, my schedule for Wednesday morning freed up so I decided to try activating one out of only three SOTA summits in Latvia: YL/YL-003. It turns out this summit is also located within WWFF territory YLFF-0007 about a 1,5h drive from Riga. Big Thanks to Val (YL2SW), Latvia’s WWFF manager, for assisting me with local rules and processing my log. A quick look at the weather forecast showed freezing temperatures, 90% chance of snow, heavy winds and overcast. Many of you will understand why a SOTA&WWFF combo in a rare country could be a small reason not to use the hotel’s sauna on a day like that. Sometimes things just need to get done.

Summit watchtower
The majestic watchtower on YL/YL-003

I got up early the next morning and was very happy to be able to grab a Bolt rental car from the street and get going quickly. The drive went by without issues up to a point just about 3km away from the mountain (well, 1-pointer hill I should say). The roads were completely covered in snow so I could barely see where I was driving. Latvia is a rather flat country but here it started to get a bit hilly and the tires were certainly not cut out for that. Continue reading CQ From Latvia with Love →

Field Reports, Morse Code, News, Portable, POTA, QRP, QRP Radios

Field Report: More Xiegu G106 POTA time and I rope in Brooks to log!

5 Comments

On Friday, February 10, 2023, I had a hankering to fit in a POTA activation that morning. South Mountains State Park was an easy detour on my drive back to the QTH, so I scheduled an activation.

I’d also been meaning to meet up with Brooks (KO4QCC). Brooks started his POTA journey not even one year ago–here’s a field report from his first SSB POTA activation.

Brooks has been steadily working on his CW skills and is dangerously close to doing his first CW activation. We’ve managed to set up one late evening casual CW rag chew and I think his CW chops are very good.  We plan to do more evening rag chews when our schedules align. He’s made amazing progress.

I contacted Brooks that Friday morning and he was game to meet up and do some POTA. He wasn’t quite ready to do a CW activation, so I suggested he log for me using the HAMRS app on my iPhone. I find that logging for CW ops during past Field Days really helped build my own confidence before I started using CW daily.

Brooks was 100% game to log for me.

And let me just say what a luxury it is to have someone log to HAMRS for me on my iPhone! It frees up my brain to simply log on paper (which I always do) and enjoy working stations without the extra busy work! Hat tip to good ole’ Brooks.

South Mountains State Park (K-2753)

I arrived at South Mountains State Park (the Clear Creek Access), put on my hiking boots, then Brooks pulled into the parking lot only a few minutes later.

We agreed in advance to fit in a quick hike up the Clear Creek Trail prior to the activation. I, for one, really needed to stretch my legs!

After the hike, I grabbed some gear from the car and we set up at the one picnic table at the Clear Creek Access.

Brooks and I both had commitments that day so could only play radio for 45-60 minutes max including set-up and take-down.

I deployed the same antenna I’d used the previous day: MW0SAW’s homebrew EFHW on a SOTAbeams winder.

Deployment didn’t take long–since the 40M EFHW is resonant on both 20 and 40 meters, there was no need for an external ATU. I powered the G106 with a 3Ah LiFePo4 battery via my Ham Radio Workbench DC Distribution Panel. Continue reading Field Report: More Xiegu G106 POTA time and I rope in Brooks to log! →

Field Reports, Morse Code, News, Portable, POTA, QRP

Giving the Xiegu G106 a thorough workout at Fort Dobbs!

7 Comments

On Thursday, February 9, 2023, a rare opportunity opened up for me: a 3.5 hour activation window–!

I was visiting and helping my parents in Catawba County, NC, so considered the park options, almost all of which are within a 35-45 minute drive.

I thought about fitting in two shorter park activations that day, but it has been so long since I’ve had the opportunity to simply hang at one park and play radio for more than an hour, I chose the extended activation option.

Although the forecast was for clear skies that day, a front was moving through that afternoon and the skies were overcast with gusty winds. I could tell rain was a very real possibility, so I chose a site with a picnic shelter to make things a bit easier.

Fort Dobbs State Historic Site (K-6839)

Fort Dobbs was a no-brainer: not only was it the closest park (thus less travel time eating into my on-air time), but the staff there are very POTA-friendly, the site is quiet, and they have an excellent shelter that I suspected (due to the dodgy weather) would be unoccupied.

When I arrived on-site, I checked in at the visitor’s center to make sure the picnic shelter hadn’t been reserved. Fortunately, they said I could have the shelter all to myself!

I had a number of radios in my car and decided en route that I would use the Xiegu G106 once again.

I packed the G106 in a waterproof Husky radio gear box I keep in my car trunk/boot. I grabbed it and my Spec-Ops EDC pack and carried it to the picnic shelter.

My plan was to pair the G106 with MW0SAW’s 40 meter EFHW antenna.

This would give me two resonant bands (40 and 20 meters) so there’d be no need to connect an external ATU. Continue reading Giving the Xiegu G106 a thorough workout at Fort Dobbs! →

Antennas, Field Reports, Morse Code, News, Portable, POTA, QRP, Stealth

Lunch Box POTA: Pairing the Elecraft AX1 with the Penntek TR-45L!

14 Comments

As I mentioned in previous posts, I’ve been using the Elecraft AX1 in heavy rotation this year. I made a commitment to myself to do a string of activations with it in January and February and also pair it with a wide variety of radios beyond the Elecraft KX2 and KX3.  So far, I’ve paired the AX1 with the:

In truth, the AX1 can be paired with any radio when you use a tripod mount.

It’s a bit trickier when connecting the AX1 directly to a radio and using the Bipod as a support because 1.) the antenna connector on the radio mustn’t be too high off of the surface, 2.) there needs to be enough clearance on the back of the radio to accommodate the bipod legs and 3.) ideally, it’s nice to have a ground point on the radio, else you’ll need to clamp the counterpoise to the shield of the BNC connector.

In addition, if your radio doesn’t have a built-in ATU of some sort, then you’ll also need a capacity hat or external ATU to finish off the impedance match. (For more notes about the AX1 and AX2, check out this previous post.)

Of course, you don’t have to use Elecraft’s bipod to support the AX1 when directly connected to a radio–you can build or 3D print your own support–but the bipod is really convenient when it does work.

Objective: Lunch Box Radio

One radio I’ve been eager to pair with the AX1 is the Penntek TR-45L.

Why? Because I love the form-factor.

Something about having a lunch box-sized radio sitting on a table with a telescoping whip protruding out the back and, with that combo, the potential of making contacts all over the globe. Continue reading Lunch Box POTA: Pairing the Elecraft AX1 with the Penntek TR-45L! →

Field Reports, Morse Code, News, Portable, POTA, QRP, Videos

Gazebo Portable! A quick hike and speedy QRP POTA activation with the Elecraft KX2 and a 28.5′ random wire

6 Comments


On the morning of Friday, February 3, 2023, I wanted to fit in a quick hike and activation as I made my way back to the QTH.  Tuttle Educational State Forest (K-4861) is my go-to when I want to hike and play radio but don’t have enough time to fit in a proper SOTA activation.

That morning, the park was very quiet–mine was the only car in the parking lot. This being an educational state forest, they tend to get large groups of visitors all at once (typically, bus loads of school kids). In the winter, however, the park is quiet because their restroom facilities and water points are all winterized.

I grabbed my SOTA pack–which contained my Elecraft KX2 field kit, Tufteln/N0RNM folding knee board, and a throw line–then hit the trails!

Although it was a windy day, I headed to the gazebo at Tuttle (one I’ve used for activations in the past) which is on a hill and has a brilliant view of Grandfather Mountain.

Trust me, Grandfather Mountain is out there, my iPhone just can’t easily capture it:

The only issue with the gazebo is that the trees behind it are short and very dense with branches. In the past, I’ve launched a line over the top of the tree, but it’s not easy because then there’s always the possibility your throw weight will land on the roof of the gazebo. You also need a 10oz or heavier throw weight on trees like this, else risk getting your line caught in the tree.

There are a number of pines immediately behind the smaller ornamental trees, but to get to those, I’d need to lay my feedline across a service road the park staff use regularly, so that’s a no-go. Continue reading Gazebo Portable! A quick hike and speedy QRP POTA activation with the Elecraft KX2 and a 28.5′ random wire →