Many thanks to Scott (KK4Z) who shares the following post from his blog KK4Z.com:
ZN-Lite II Update
by Scott (KK4Z)
I’ve had these paddles for about a year now but I haven’t used them much. Here is a link to my original review: https://kk4z.com/2021/11/24/n3zn-zn-lite-ii/. The reason is rather complex. they are small but because of their design, they can’t be held in the hand like some other paddles. If you put them on a table with the included Lexan base, they are so light, you have to use both hands to operate them. To me, it was a conundrum. These are very well-built, precision paddles and as smooth as any well-made paddle out there. My original thought was to use them for POTA. I was a little discouraged with their functionality, and even offered to sell them at one point — but I didn’t.
Here lately, I have been pairing my paddles with my various radios. My Begali Signature with my IC-7610, Begali Traveler Light with my IC-7300, Begali Adventure with my IC-705, and my N0SA SOTA paddle with my TX-500. I have a Penntek TR-45L on order. It is a CW-only radio that has a nice retro look. I thought these paddles would be a great match for this radio. What I want for this radio is a set of paddles that can be operated with one hand. The TR-45L is a tabletop radio https://www.wa3rnc.com/store/penntek-tr-45l-qrp-transceiver. I envision its use at a park during a POTA activation. I decided what my ZN-Lite II paddles needed was a heavier base. I ordered from Amazon a 3″ diameter, 1/2″ thick piece of steel.
I drilled a hole to mount the paddle and 4 smaller holes to mount the rubber feet. The paddle hole is countersunk on the bottom so the screw head is below (or above) the surface of the base. That way it can be used without the feet.
The holes for the feet were drilled and tapped for 8-32 thread. I had to drill the hole all the way through because I didn’t have a bottom tap. Without a bottom tap, there would not have been enough threads in the hole if I didn’t drill all the way through. When I do these projects, I basically use hand tools and in this case, I used a cheap drill press I bought from Home Depot.
After returning from Canada this summer, I had a number of projects on the table including three radios to evaluate and a number of DIY projects on our investment house. The home projects took priority, so for the month of August, I did very little in terms of POTA activating.
In September, there was one radio in particular I was very eager to take to the field (besides the Penntek TR-45L). That was my Elecraft KX1, “Ruby.”
Before leaving for Canada, Ruby went into surgery once again under the care of my good friend “Dr.” Vlado (N3CZ).
I couldn’t figure out why she kept dropping power output to nil after being on the air for 20-25 minutes. I knew Vlado would sort out the issue.
Vlado discovered the source was a cold solder joint that was failing when the radio would become warm from operating. He fixed this and checked a number of other spots on the board.
He then tested the KX1 on a dummy load for and hour and she performed flawlessly after the surgery.
He fixed Ruby in early June and then we went to Canada for two months. I never put Ruby on the air in Canada.
After our return to the States, I was eager to take Ruby out to the field again and that’s exactly what I did on Sunday, September 11, 2022.
Lake James State Park (K-2739)
Lake James State Park–along with South Mountains State Park–are the easiest parks for me to hit during my nearly weekly travels on Interstate 40. I feel so fortunate that both are superb POTA sites with loads of spots to operate.
I arrived in the late afternoon and to my surprise there was hardly anyone at the park (I think it was a little too close to evening mealtime for families).
I set up my station at a table close to the parking area just to keep things simple. I was looking forward to enjoying at least 30 minutes on the air and seeing just how well Ruby might hold up.
I decided to use the Tufteln End-Fed Random Wire antenna knowing it would be a quick to deploy and frequency agile.
I tried to use the KX1 ATU to tune the random wire, but I wasn’t pleased with the SWR. Frankly, it was doable (1.9:1 on 20 meters), but I wanted something much closer to 1:1 since I was already only pushing 2.5-3 watts output.
Keep in mind, the KX1’s internal ATU is not in the same league as the ones in the Elecraft KX2, KX3, or T1–the KX1 ATU has a much smaller matching range.
Also, I suspect Ruby’s ATU wasn’t built for optimal performance by the original builder. I do plan to re-work her ATU as best I can at some point in the future.
I pulled out the Elecraft T1, put the KX1 ATU in bypass mode, and hooked it up to the antenna. The T1 had no problem at all finding 1:1 matches across 40, 30, and 20 meters, of course.
Turns out, if you go to Canada for nearly two months, when you return home you’re going to have about two months worth of catch up.
It’s all explained in one of Einstein’s theories. If memory serves, Einstein stated:
“One cannot simply ignore stuff for two months and expect no repercussions. Time lost must be accounted for due to the principles of the conservation of energy. Plus…what in creation were you thinking?”
When we returned from Canada in early August I had some pretty big plans about the parks and (especially) summits I would hit here in North Carolina. But after returning, I quickly realized I had so much work to do around the house and a number of DIY jobs I’d postponed at our investment property. They all immediately took priority.
Indeed, in the one month span after returning from Canada, I only performed three park and no summit activations. There was a three week period of time without activations of any sort. I simply didn’t have the time to fit anymore in my schedule. This all gave me a serious case of activation withdrawal.
If you’ve been following my field reports, you’ve no doubt noticed that I never do multi-hour activations at one site unless I happen to be camping at a POTA park.
I’m asked about this fairly regularly (why I don’t do longer activations to achieve Kilo awards, etc.) but the truth is I make POTA/SOTA fit in my busy family schedule. This often equates to short (30-60 minute) activation windows.
Then quite often, I’m on the road or doing errands in town and realize I have a short opening for an activation, so I squeeze it into the day. This is why I always have a fully self-contained field radio kit in my car. At a moment’s notice, I can set up a station, and play radio.
In a way, I find this style of quick activation fun, too. “Can I seriously validate a park during this short window of time–?”
These activations remind me of that scene in A Christmas Story where the father gets a small thrill out of timing himself as he changes a flat tire on the side of the road. I totally get that.
Except with me it’s deploying antennas instead of managing lug nuts.
Hamfest time!
Friday, September 2, 2022 was a big day for me. On the way back from visiting my folks that morning, I spent a couple of hours at the Shelby Hamfest.
The Shelby Hamfest typically has the largest outdoor tailgate market in all of North Carolina and likely one of the larger ones in the southeast US. I had no items on my wish list, I just wanted to see what was there.
This was the first hamfest I’d attended in a little over a year. It was a lot of fun and I got to meet a number of friends and readers/subscribers.
Driving home after the Shelby Hamfest that early afternoon, I realized I was passing dangerously close to the Clear Creek access of South Mountains State Park.
I had a couple of errands to run back home before the post office closed at 17:00 that day, but in my head I believe I had just enough time for a quick activation. The total amount of detour driving would only be about 15 minutes; I’d just need to keep the activation (including most set up and pack up) under 45 minutes or so.
At the last minute, I took a right turn and headed to the park!
Fortunately, the one lonely picnic table at the Clear Creek access was unoccupied.
I grabbed my IC-705 kit and a new antenna!
The MM0OPX QRP End-Fed Half-Wave (EFHW)
A few weeks prior, Colin (MM0OPX) reached out to me and asked if I would consider testing a new high-quality, highly-efficient QRP EFHW he’d designed.
Of course, there’s nothing new about an EFHW–it’s one of the most popular field antenna designs on the planet–but Colin’s goal was to make one with the lowest insertion loss possible in a compact, lightweight (50g), and durable format.
I say he succeeded.
In fact, this activation was actually the second one where I used Colin’s QRP EFHW. The previous day, I paired it with a then very Beta version of the Penntek TR-45L at Tuttle Educational State Forest (K-4861).
In short, the antenna made for a wildly successful QRP activation. Here’s the QSO Map (you’ll need to click and enlarge to see the number of contacts):
The Penntek TR-45L was still quite new at the time and even though I got John’s (WA3RNC) blessing, I didn’t post the activation video and mini overview on YouTube. Keep in mind the TR-45L was still in Beta so not all features had been finalized.
As I mentioned in a previous post, I’ve now invested in a Pro account with Vimeo that allows me to post completely ad-free videos that my Patreon supporters can enjoy and even download. I recently discovered that YouTube unfortunately inserts ads even though I have monetization turned off. I pay for Vimeo’s bandwidth and server space, so I also can control the ad experience completely (basically eliminating any possibility of ads!).
My Patreon supporters are the ones making it possible for me to pay the annual $420 fee to Vimeo and I am incredibly grateful, so I pass along the benefit to them.
We started off our trip in Ottawa where we spent four days.
Only moments after arriving at our hotel that first day, Vince (VE6LK) made time in his schedule to administer my Canadian Basic exam remotely. That evening–despite being a bit bleary eyed after a fairly long day of driving–I passed my Basic with Honours. (I’m still chuffed about that!)
By the next morning, I already had the callsign I requested: VY2SW. My mailing address in Canada is in Prince Edward Island hence the VY2 call. Since essentially every new call in Canada is a vanity call, I chose the suffix SW to reflect my US call. PEI is one of the few provinces where as a Basic license holder you can request a 2×2 call.
My first activation in Canada was at Hog’s Back Conservation Reserve. I had the good fortune of meeting up with Andrew, one of my subscribers, at the park. It was great getting to know him–what a nice fellow–and to start off a series of activations in Canada on the right foot.
After leaving Ottawa, we made our way to Saint-Ferréol-les-Neiges, Québec where we’d reserved a condo/townhome for 6 weeks. That served as our home base as we traveled around Québec City, Saguenay, the Charlevoix region, and the North Shore of the St-Lawrence.
I noted in many field reports how surprised I was to discover that a number of popular parks were still ATNOs (All-Time New Ones) in the POTA network. Then again, POTA hasn’t been in Canada as long as other similar programs like WWFF and SOTA.
Many of the POTA activations I made in Canada were in urban parks–especially the ones in/around Québec City. These activations took me outside of my comfort zone; I’m used to activating state and national parks back home that are expansive and largely in rural areas.
Each time our family spends the summer in Québec, we make time to visit the Saguenay region which is just a couple hours north of Québec City.
We enjoy the hikes, the river walks, and other outdoor activities. It’s a beautiful part of Québec.
This year, we spent more time along the north shore of the St. Lawrence visiting Baie-Comeau and later camping and whale watching a little north of Tadoussac. We also explored more of the Charlevoix region and even parts of the Québec City area we’d never visited in the past. I really enjoyed driving some new-to-us back country roads.
A couple weeks before leaving Québec, we took a family poll and unanimously decided to squeeze in a trip to Saguenay despite our other travels.
Due to other activities we’d scheduled, we only had a window of a couple of days to make the trip. The weather didn’t look that wonderful for the drive north and, in fact, it wasn’t. We drove along a line of torrential rain that was so heavy at one point, I (along with many other drivers) pulled off the road to wait out the heaviest bit.
Otherwise, the drive was/is a beautiful one through the Jacques-Cartier National Park on 73/175 North. Had it not been for the thunderstorms and rain, I would have taken a small detour to make at least one activation.
The first day in Saguenay was all about walking on the river, and hitting some of our favorite spots when the rain finally moved on; I didn’t attempt a park activation. I decided instead to do an early morning activation the following day (July 22, 2022).
Finding a park
You may have noticed that quite a lot of my activations in Québec have been ATNOs (All-Time New Ones). I didn’t specifically set out to activate ATNOs–in fact, they were hard to avoid because there were so many.
Not so in Saguenay!
POTA activators in Saguenay are an active bunch and they are spoiled for choice in terms of the density of parks; there are so many!
It really pleased me to see so many previous activations at the parks I researched–not only activations in the summer months, but also winter (and they have proper winters in Saguenay/Chicoutimi–!).
There were so many parks to choose from, I decided I would simply choose the one closest to our hotel and that turned out to be Parc de la Rivière-du-Moulin.
It was so close to our hotel, I could have easily walked there.
Many thanks to Brian (K3ES) who shares the following field report:
Field Report: Reflections on a Kilo at Cook Forest State Park
by Brian (K3ES)
Cook Forest State Park in northwest Pennsylvania has always been a special place for me. It abounds in trees (including some of the last virgin timber around), wildlife (deer, turkeys, song birds, squirrels, and the occasional bear), and also includes the scenic Clarion River. When I found out about Parks on the Air (POTA) after getting licensed in 2020, I knew that I had to put POTA entity K-1345 on the air.
Our family cabin; which has been central to all of the phases of my life – including milestones, joys, sorrows, and unadulterated wonder – is located on a plot of land bordered on two sides by the park. It just seemed natural and right for me to do my first-ever POTA activation under an ancient hemlock tree just a few steps over the line from the back corner of our property. That mostly-SSB activation happened in May 2021 with my TX-500 pushing 10 watts into a homebrew dipole suspended from a dead branch up 30 ft in the hemlock.
Last weekend, I reached a meaningful personal goal by completing my 1000th activator contact from K-1345. After the first activation I never again operated mostly-SSB, and I never increased radiated power. Nearly all of my contacts since have used CW, and many were completed at 5 watts. The added challenge of QRP CW undoubtedly made the Kilo more difficult, but it was also much more fulfilling. It has taken me 28 successful activations, a lot of work to improve my CW skills, and a lot of patient support from the hunters who have shared this journey with me.
My activations at K-1345 tell the story of my journey as a CW operator. I took my first steps on that journey in late 2020, months before I had a portable radio or a plan for my first activation. I started with an Android app, V-Band, and listening to CW exchanges on webSDR. Eventually that progressed to CW Academy basic, intermediate, and advanced classes. The classes really upped my CW game, but what helped even more was using CW on the air. I finally got my HF station on the air in March 2021 and started hunting parks, SSB at first, then increasingly CW. During my first mostly-SSB activation I did manage to hunt down three park-to-park contacts using CW. I started my second activation by calling CQ using CW, and I have not looked back. Wow, those hunters were patient during that first first CW activation! My skills have improved greatly since then, but I’m still not where I want to be. The next goal for me is to gain confidence and proficiency in less-structured QSOs.
I want to thank Thomas – K4SWL, whose real time, real life activation videos challenged, motivated, and inspired me to learn and use CW. I greatly appreciate the work of the CW Academy advisors who guided me through some of the hard work needed for improvement. I also need to thank the hundreds of hunters who have patiently endured my developing CW skill set. Finally, my hat is off for the dedicated POTA volunteers, who continue to improve and expand this amazing activity to the benefit of radio amateurs around the world.
Completing the Kilo activation would have taken me longer if it were not for the tremendous encouragement provided by my gracious, intelligent, and beautiful XYL. As I was contemplating indoor chores on a Friday morning, she pointed out the opportunity to go out and activate during the best weather of the weekend, and save the chores for a rainy day. Who am I to argue with such impeccable logic? Off to the woods we went!!!
I made a point of using the TX-500 with the homebrew dipole suspended in that ancient hemlock tree to complete the Kilo activation, going back toward the starting point, as it were. Of course I did finish with CW mode and 5 watts to commemorate my personal growth during the journey, too. I was set up to go by mid-afternoon. Needing 57 contacts to complete the Kilo, I decided to get some contacts on 20m, then move to 40m a bit later.
After calling CQ for almost half an hour to get two contacts, I decided to move to 40m a bit sooner than planned…
40m was hot! I completed the eight additional contacts needed for a successful activation in less than 15 minutes. By the 2 hour mark, I had racked up a total of 69 contacts and finished the Kilo.
As a final note, I picked up 55 more contacts on Saturday, bringing my total CW mode contacts over 1000. The rain started early Sunday morning, and I got my indoor chores finished after all.
At some point during my Canada travels this summer, I realized I had been using the Elecraft KX2 quite heavily. If you’ve been following my recent field reports, you’ve no doubt seen a lot of the KX2.
This was never intentional–it’s just how it played out.
Why the KX2 in heavy rotation?
For starters, I only brought two general coverage radios with me to Canada: the KX2 and the Discovery TX-500. I also tucked away my KX1 and MTR-3B (hidden under the floor of my boot/trunk space), but band conditions were so incredibly poor most days, I liked the option of a QRP “full gallon” (ie. 5 watts+) for activations. The KX2 and TX-500 can push up to 10 watts when needed.
The KX2 tends to be the radio I reach for when I don’t know what to expect at a park. Most parks I activated in Québec were firsts for me so I liked having my most versatile radio option on hand.
Since the KX2 has a built-in ATU, battery pack, and even an internal mic; it’s so self-contained, I pretty much take it everywhere.
The KX2 is also one of the most compact radios I own–so compact, in fact, it fits on a small folding knee board my friend Carolanne (N0RNM) made (see in photo above and read more about the design in her guest post). With this kneeboard, I’ve no need of a table: just strap the board to my leg, add radio & log book, and I’m good to go!
Whereas I feel like the KX2 is a Swiss Army Knife of a radio, the TX-500 feels more like a tactical radio–ready for any changing weather environment. The TX-500 is water resistant, weather/dust sealed, and insanely rugged. It’s also the most efficient general coverage QRP radio I own, needing only 100-110 mA in receive.
The TX-500 is super portable and I tend to reach for it when weather conditions are uncertain. In a way, I often don’t think about it when there’s good weather. Odd, but true!
It’s a wee bit too wide for my current knee board, but (hint) if you own a TX-500, hang tight. There may be a knee board in your future.
All that said, the big reason I didn’t take the TX-500 to the field a lot is because it served as my “home base” transceiver at our rental condo in Québec. I had it set up for hunting POTA and SOTA activators and making casual contacts. The TX-500 sat on a table next to the deck at the condo and was hooked up to the CHA MPAS Lite most of the time; the KX2 stayed packed away for POTA/SOTA.
TX-500 field time!
On July 18, 2022, I grabbed the TX-500 from the table and packed it in my field radio backpack.
My wife and daughters were up for a trip to Québec City, so I picked out a park in the Sainte-Foy part of town.
There are many POTA parks in Sainte-Foy (indeed, I already activated four of them) but the one that immediately came to mind was one of the few I’d explored previously in Québec: Base de plein air Sainte-Foy.
I was very surprised to discover that Base de plein air Ste-Foy was also a POTA ATNO. No doubt, there had been plenty of radio activity on-site int he past, but no POTA activations.
This spring, as we planned our two months of travel in Québec, Canada, I jotted down one location in particular that I wanted to visit: Baie-Comeau.
Baie-Comeau is located about 420 km (260 miles) northeast of Québec City on the north shore of the mighty St-Lawerence river. It’s a small city with a population of around 21,000 and is pretty darn isolated. For many travelers, Baie-Comeau is the last major stop before a long, lonely road journey north to Labrador City or further northeast along the St-Lawrence.
I’ve always wanted to visit Baie-Comeau and my wife and daughters were game to make a proper trip out of it!
While in Québec, we plotted the details of our trip to coincide with a good weather opening.
We packed our gear, left the home base near St-Anne-de-Beaupré on July 13, 2022, and drove up the St-Lawrence, crossing the Saguenay River by ferry, and on up to Baie-Comeau with a few stops along the way.
It’s a beautiful drive.
We reserved lodging at the Hôtel Le Manoir Baie-Comeau (an excellent hotel, if you ever find yourself overnight in Baie-Comeau). We’re frugal travelers, so this was a bit of a splurge, but the stay coincided with our 20th wedding anniversary, so why not?
I was very happy to see that the Manicouagan Uapishka Biosphere Reserve was on a hill only a short drive from the hotel. It was approaching dinner hour, so I didn’t want to fit in a late afternoon activation with the family; we had other plans that evening. My wife suggested instead that we check out the park and walk the trails before dinner which would allow me a bit of time to scope out an activation site.
Manicouagan Uapishka Biosphere Reserve (VE-0054)
We discovered that Google Maps doesn’t have the trailhead marked very well. It led us to a neighborhood street a short walk from the park. I remembered reading a note from a local (online) mentioning there was ample parking at “the church” so we drove to a beautiful church nearby and immediately spotted the trailhead. If you ever find yourself in Baie-Comeau, here are the coordinates for the trailhead.
Turns out, the church is no longer a church, but has has been converted into the headquarters for the park which is a part of the Jardins des glaciers.
There are some brilliant views of the St-Lawrence from the parking lot.
We quite easily found the trailhead of the sentier which led into the biosphere reserve. I used my GPS to confirm when we were well within the boundaries.
We enjoyed a scenic hike that evening.
As I mention in my activation video, this is one of the amazing things about doing POTA during travels: you discover so many incredible parks that would have otherwise gone unnoticed. My family truly appreciates this particular aspect of POTA. It opens the opportunity to find spots only locals might otherwise know about.
After our hike that evening, I had a pretty good idea where I could set up in the morning. We made our way back to the hotel and enjoyed dinner and a movie.
Morning activation
So that my activation time wouldn’t interfere with family plans that day, I scheduled an early morning activation for July 14.
A SOTA road trip from Berlin to Tuscany via the Alps and back
by Leo (DL2COM)
Flashback March 2021: I am sitting on a couch in the countryside 2h north of Berlin, Germany. It’s a rainy day and my 1-year-old kid just fell asleep on my chest. I am watching Youtube and enjoying the feeling of just having maintained the chainsaw after a productive run preparing firewood.
Then suddenly something special got washed into my feed: Adam K6ARK activating a summit in CW somewhere on the U.S. West Coast. I thought: I have no idea what this wizardry is but this is exactly what I want to do. Right here, right now. Well I have a child to take care of, the next mountain with a prominence of >150m (~500 feet, min. requirement to be a valid SOTA summit) is 3h away, I don’t know what ham radio is, I have no license and what the heck is CW.
Jump to July 2022: I am sitting in my car commencing a vacation road trip to the south of Tuscany, Italy. Due to the chaotic luggage situation at EU airports and unreal prices for rental cars my family and I had decided that we would be better off if I drove down while my wife and kids took the plane without having to check in any bags (btw: best decision ever).
Our schedule allowed for me to leave a few days early so I could make room to do a little bit of hiking and throw in a few casual SOTA activations because why not. On top I saw that there were a few never activated summits in close proximity to where we planned to stay. I could feel my heart pumping already followed by a strong reassuring feeling radiating from the well-thought-through contents of my backpack in the trunk. Am I ready? Who cares. I am on my own now. I had completed a quick 1-pointer activation in May and a few POTAs but what was planned now was a different level.
Going into detail about every summit would go beyond the scope of this article so here are just a few highlights: The first leg down to the Garmisch-Partenkirchen area went by in a wink (7h drive). I passed most of the time rehearsing CW by singing license plates out loud. The fun peaked with plates along the lines of M-OT-9990 or E-SI-5545. It’s all about melody and timing, remember. I met up with my buddy Chris whom I hadn’t seen in a long time and who agreed to join me on the first hike up Zirbelkopf (8-points summit) to witness the cult activity I had tried and failed to explain to him beforehand.
Some activations are more challenging than others.
I think we had all hoped on our climb into Cycle 25 that we’d get some brilliant propagation, stable conditions, and the opportunity to use less power and yield more DX. Who doesn’t want that?
But we get what we get from our local star and the theme this year is that it is indeed showing some positive indicators, but at the same time–this summer, especially–it’s spitting stuff toward our pale blue dot that makes a mess of the ionosphere.
Lately, each time I head out the door to activate a park, I never know what to expect. It’s part of the fun. Will band conditions be in the dumps, or will the ionosphere provide the perfect platform for my QRP signals–?
On Thursday July 7, 2022 it was the former rather than the latter.
I checked the POTA Map and discovered a park we’d never visited in the past, so it looked like a good candidate for a POTA activation!
Digging deeper, I also discovered it was an ATNO (All-Time New One) and had never been activated for POTA before. Hard to believe given its location, but there you go!
I put my POTA backpack in the car and we hit the road!
Parc des Moulins (VE-5068)
After a little searching, we finally found a good parking spot at the park. There was a LOT of construction going on around the grounds.
Parc des Moulins, like many of the parks I’d recently activated in/around Québec City, is a proper urban park with manicured paths and gardens. It’s a beautiful little park!
QRP radios, product announcements, reviews, news and more. Low power amateur radio fun!
Please support QRPer by adding us to your whitelist in your ad blocker. Ads are what helps us stay online. All of our ads are ham radio related--no junk, we promise! Thank you!