Tag Archives: Morse Code

Field Reports, Morse Code, News, QRP, SSB

Spring Flashback: Pairing the Elecraft KX2 and Chameleon MPAS Lite at New River State Park

6 Comments

This year, it’s been a challenge for me to keep up with field reports that accompany my activation videos.  It’s been a very busy year with a fair amount of travel, DIY projects, and family activities.

I recently realized that I have a number of activation videos from much earlier this year–videos I skipped over in order to post some of my Canadian field reports while I was still in Canada (at one point, I was over 2 months behind posting field reports and activation videos!).

I’ve often said that even if only a handful of people enjoyed my reports and activation videos, I’d still post them. I feel like they could even play a small part in someone’s path to doing field radio or learning CW, it’s wort it.

Plus, I occasionally like looking back at them myself.

In a sense, these reports are my travelogues and they bring back memories of some beautiful spots where I’ve played radio, gone camping, and enjoyed time with my family.

So why don’t you join me as we travel back a few months to…

Springtime

Photo by K4TLI

In late April 2022, I took my family on a camping trip to New River State Park here in North Carolina. You might remember this post and a couple field reports from that trip.

In short, it was an amazing trip and I got to play radio quite a bit!

Each day, I played radio from the morning into the evening. The camp site was actually ideal for playing radio. Until…

Saturday morning (April 30) I woke up, made some coffee at the picnic table, then fired up my radio. It was then I learned that one of the new RVs that joined the campground Friday evening brought some sort of RFI-spewing device with them.

I’ve no clue what it was. If I were to venture a guess, I’d say it was likely something used in electronic warfare. It was intense.

At the campsite that morning, I couldn’t copy a single signal that wasn’t S9+ on my meter. The noise level was S8 or S9.

I decided that I’d need to move to a different part of the park to play radio after breakfast and our family’s morning hike.

Fortunately, there was a large picnic shelter within a short drive of our campsite.

I had the whole place to myself! Continue reading Spring Flashback: Pairing the Elecraft KX2 and Chameleon MPAS Lite at New River State Park →

Field Reports, Guest Posts, Morse Code, News, POTA

Vince’s chilly #POTAThon1111 run on Remembrance/Veterans Day 2022

12 Comments

Many thanks to Vince (VE6LK) who shares the following guest post and field report from Alberta, Canada:

#POTAThon1111 – report from the field

by Vince (VE6LK)

My goal is to activate all of the parks I can that have never been activated.

I’m blessed to live in such a beautiful part of the world and see these parks up close. One wall in my shack has a map of all the un-activated parks and routes within a day’s drive of me, and most are already planned with routes. There will be more #POTAThons!

[Click all images to enlarge.]

#POTAThon is what I call it when I plan on getting to more than one park in a day. Usually these things aren’t thought of for weeks in advance, they are more like a “tomorrow morning” kind of thing. Opportunistic, if you will.

But first, a note about the day I chose…

November 11 is called different things in different countries, but what we share in common is we honour our Veterans and we give thanks for the freedoms they fought for. So today I paused to give thanks and think of the lives they gave so that I have the freedoms I do today. I would bundle up that giving of thanks into an urgently needed day away from the office.

And with that, #POTAThon1111 was born.

#POTAThon is what I tag these activities on my Twitter feed and the month and day denote when it happened. By definition a #POTAThon is more than one activation in a day; I’m simple like that. #POTAThon1111 is the third such event.

The first was #POTAThon0930, an ambitious day attempting 8 sites with two operators and most of them in backcountry outside of cellular range. You can see the video from that day when you click on this link. We didn’t get to all 8 but we had a hoot trying.

Just before I departed for #POTAThon0930, Thomas Witherspoon K4SWL (you know him, right?) said words to me I’ll never forget: “Vince, just work CW at a speed where you are comfortable, people will adjust. If you work the sacred language, I will find you.”

With those words of encouragement, I gave it a go. On that day I worked CW and a bit of SSB, but since then it’s been all CW for POTA. While the propagation wasn’t with Thomas and I on 0930, we did connect some weeks later – KX3 to KX3 no less.

You need to understand that I think I’m terrible at CW, but I also need to let you in on a secret: there’s no such thing as a Bad CW Contact. I explain that concept in more detail on YouTube, and the essence is: just do it and roll with it, warts and all. People adjust their ways and usually their speed. Go out and have fun trying. Continue reading Vince’s chilly #POTAThon1111 run on Remembrance/Veterans Day 2022 →

Field Reports, How To, Morse Code, News, Portable, POTA, QRP, Skills, Videos

Field Report: How I evaluate a new POTA site plus serious QRP fun with my new-to-me Elecraft KX1

3 Comments

On Friday, October 7, 2022, I had a couple of errands to run in/around Morganton, NC. Of course, I always have POTA in mind so squeezed in an activation at nearby Tuttle Educational State Forest that morning.  That activation took longer than expected due to swapping out antennas and radios, but it was a success and quite fun.

After Tuttle, I knew I could fit in one more activation if I made it quick, so I set my sights on Table Rock Fish Hatchery (K-8012), but first I had a couple of errands to run in Morganton!

I visited my friend Hamilton at his ceramics studio, popped by another store to pick up a couple of items, then (on Hamilton’s advice) grabbed lunch at the The Grind Café.

I must say that Hamilton was spot-on. My wrap was delicious!

Just what I needed to fuel another POTA activation, right? Right!

After lunch, I drove to Table Rock Fish Hatchery. The weather was ideal and the leaves were beginning to show color.

At our home in the mountains, we were almost at peak leaf color, but the fish hatchery site is much lower in elevation. The weather was simply ideal.

On days like this, driving to a site is half the fun. Continue reading Field Report: How I evaluate a new POTA site plus serious QRP fun with my new-to-me Elecraft KX1 →

Field Reports, Morse Code, News, Portable, POTA, QRP, QRP Radios

QRP DX: A quick POTA break with the Penntek TR-45L on the Blue Ridge Parkway

12 Comments

As I’ve mentioned in the past, I feel pretty lucky to live in an area that is  flush with POTA sites.  It’s not that we have numerous individual parks, but the parks we do have encompass massive portions of the area.

One park, in particular, that literally runs around and through Asheville, NC, is the Blue Ridge Parkway. When I’m in town and have a few free minutes, it’s quite easy to hit the BRP; it’s never far away.  I can set up along the parkway pretty much anywhere, or go to the Visitor’s Center or Folk Art Center if I want to operate from a picnic table. In addition, the Mountains To Sea Trail runs along large portions of the parkway, so it’s very easy to hit it as well.

On Wednesday, September 28, 2022, I took my daughters to a class and had the better part of an hour to play radio. The BRP’s Folk Art Center was only a 10 minute drive from their class, so I made a beeline for the site as soon as I dropped them off.

I had the amazing Penntek TR-45L packed in my car, and decided to pair it with my Tufteln End-Fed Random Wire antenna.

Continue reading QRP DX: A quick POTA break with the Penntek TR-45L on the Blue Ridge Parkway →

Field Reports, Guest Posts, Hams, Morse Code, News, Portable, POTA, QRP

Jay discovered that his first CW POTA activation wasn’t scary at all!

20 Comments

Many thanks to Jay (W1ASP) who, last week, sent me a note about his first POTA CW activation. I asked if he’d consider writing up a short field report about his experience to share with others and he was happy to do so. Thank you, Jay.

Halloween POTA

by Jay (W1ASP)

Halloween doesn’t have to be scary.

I set out to Bear Brook State Park (K-2643) for my first CW POTA activation.

Bear Brook is relatively close by, its the largest state park in New Hampshire with over 10,000 acres. There’s camping, hiking and biking trails along with an archery course and plenty of swimming and fishing areas.

I didn’t give it much thought about what day it was, just that I had the time to do an activation and it was nice out, what a perfect opportunity to break in the newly assembled kit.

I decided on a spot next to the water and as luck would have it there was a picnic table right there. I took out my gear, set up and proceeded to tune around and listen. The band seemed pretty quiet. I wasn’t sure if I’d get enough QSO’s in to make it an official activation. I decided on 14.038 MHz, I sent QRL? I then held down the memory button, took a deep breath and hit it again to transmit: CQ POTA DE W1ASP

I waited a second or two and used the memory keyer once more, again nothing. I went to the POTA website on my phone and added my activation.

The memory keyer was used for a third time, I noticed a message pop up on my logging app, the Reverse Beacon Network spotted me. It wasn’t too long after, the first call came back to me!

I was nervous and fumbled a bit here and there but once I took my time I was fine, sending their call back and TU UR 599 599 NH BK. I cheated a little and left the CW decoder enabled. I wanted to be sure I had the call correct as I logged my 13 QSO’s. (I swear the 13 wasn’t intentional.) for my first CW park activation! I only realized that it was Halloween while walking back to my truck.

I thought to myself, “that wasn’t scary at all.”

Once I decided that, as an activator I’m in charge of the QSO, I relaxed and it was a lot of fun. I may have made a few mistakes but everyone was patient with me. I later received an email from another Ham in Delaware. He was using the same radio, and referred to them as the perfect “picnic portable radio” we emailed back and forth a few times and I look forward to hearing him on the air again soon.

 

The week before, I finished building my second QCX Mini. The first kit I built was for the 30 meter band around this time last year, this second one is a 20 meter version. I love these little radios, there’s something about these little transceivers that I just can’t seem to put them down.

I took my time making sure it was working properly, I hooked it up in my shack and I had my first QSO with another POTO activator in Maryland just over 400 miles away.  To say I was excited is an understatement!

I planned on putting together a kit about a month ago for POTA and eventually SOTA with the QCX Mini as the radio. I decided on using a small pack, I wanted it to be a self contained kit that had everything I needed to do an activation and nothing extra.

I keep the wire and radios together,  and depending what band I choose to operate on is the one I pack. I’m considering a third kit; maybe a 10m version? I threw the EFHW matching transformer in the bag along with a notebook, mechanical pencil and a battery pack I put together using four 3.2v LifePo batteries. The paddle I’m currently using is a stainless paddle I found on online with a mini CW paddle for backup and set of folding headphones.

I’m looking forward to my next park, this was a great experience. I wanted to learn CW since I became a Ham in 2016, that’s another story of what got me into Ham Radio in the first place.

Field Reports, Morse Code, News, Portable, POTA, QRP

POTA Plan C: Swapping antennas and rigs at Tuttle Educational State Forest

9 Comments

After the success of my previous day’s activation at Fort Dobbs State Historic Site, I decided to take the Icom IC-703 Plus out for yet another activation.

As I mentioned in the previous post, the IC-703 has not gotten a lot of outdoor time this year because I’ve had issues with the electronic keyer locking up when using the radio with end-fed antennas.

Of course, there are a number of ways to mitigate or radiate the RF that could be coming back to the radio, so at Fort Dobbs, the previous day, I used a simple common mode choke. It seemed to do the trick.

I was curious if using a common mode choke might be the only solution needed to solve this problem, or if I’d need to perform a mod to my IC-703.

I was ready to test the IC-703 again.

I had a fair amount of antenna options in the trunk of my car, so on the way to Tuttle Educational State Forest (on Friday, October 7, 2022), I considered a few options to shake things up a bit.

Since I was feeling comfortable that the common mode choke was taking care of things, I decided to push the limit a bit and deploy an end-fed random wire antenna. I didn’t have any of my mini portable 9:1 random wire antennas in the car (PackTenna, Tufteln, etc.), but I did have another solution: the Chameleon MPAS Lite.

The cool thing about the CHA MPAS Lite is that while it’s primarily designed to be a vertical antenna with counterpoise, it can be reconfigured and deployed a number of ways including as a simple end-fed random wire antenna.

After giving it some thought, I decided it might be fun to deploy it as an inverted V random wire. In fact, here’s a diagram from the MPAS Lite manual of exactly what I planned to do.

I’d be using the MPAS Lite counterpoise as the radiator, so I wouldn’t have the optional second counterpoise as seen in the illustration above. That’s okay, though, because I was feeding the antenna with Chameleon’s 50′ RG-58C/U cable with in-line choke; the shield of the coax would act as the antenna counterpoise.

This is the same coax cable I used the previous day. Continue reading POTA Plan C: Swapping antennas and rigs at Tuttle Educational State Forest →

Antennas, Field Reports, Morse Code, News, Portable, POTA, QRP

POTA with the Icom IC-703 Plus: Working a serious SWR problem first, though!

25 Comments

If you’ve been here long, you’ve no doubt noticed that I have a sizable collection of QRP radios I take to the field.

Although I have some favorites, I try to rotate all of my radios in the field and even pair them with different antenna combinations as much as possible. If I only owned one field radio, I’d shake things up by pairing my one radio with different antennas deployed different ways during my POTA/SOTA activations.

I get a real thrill out of testing different combinations, actually, and I feel like it keeps me on my toes because I don’t get too comfortable with any one setup in the field.

No doubt, using a wide variety of radios gives me a more informed perspective when beta testing or evaluating new radio models.

That said, there is one radio in my collection that has been overlooked too many times: my Icom IC-703 Plus.

Many of you have noticed this, in fact.  I’ve gotten several emails and comments asking, “So Thomas…when are you taking the 703 out again–?” 🙂

When I purchased the ‘703 from my buddy Don a couple years ago, I imagined taking it to the field very regularly. I always thought it was a cool little radio and with its built-in ATU, it’s quite compact for a tabletop-style rig.

Thing is, each time I’ve taken it to the field, I’ve had issues with the electronic keying that I did not have when using it in the shack. It’s quite sensitive to RF, so end-fed antennas seem to create unwanted dits and dashes in the keyer.

The simple fix, I hoped, was simply using an in-line common mode choke to keep the RF away from the radio. Thing is, the IC-703 has an SO-239 antenna port and two of my common mode chokes are BNC. I meant to purchase a BNC-to-PL-259 adapter at the Shelby Hamfest, but picked up the wrong item (I should have been wearing my glasses).

Then I remembered that my Chameleon 50′ RG-58C/U cable not only has an integrated in-line choke, but also PL-259 connectors. This could work! Continue reading POTA with the Icom IC-703 Plus: Working a serious SWR problem first, though! →

Articles, Field Reports, Guest Posts, News, Portable, POTA, QRP Radios

Mark’s first POTA activation with the Penntek TR-45L

14 Comments

Many thanks to Mark (W8EWH) who shares the following field report:

An Afternoon POTA Activation with the PENNTEK TL-45L

by Mark (W8EWH)

I have a hard time resisting new QRP radios, and I have an equally hard time resisting getting outdoors when late October brings 70F (21C) temps to Michigan.  Days like these are especially sweet given we saw the first snow here last week (no accumulation – but still…). For me there was no better way to enjoy this unexpected weather gift than with an early afternoon POTA activation with my newest QRP radio, the PENNTEK TL-45L.

The TL-45L is the latest radio from WA3RNC, joining the TR-35 and TR-25 in his online store.  It’s a 5-band, 5-watt CW transceiver covering the 80, 40-, 30-, 20- and 17-meter bands.  That in and of itself is not particularly noteworthy.  But when you look at this radio, you’ll immediately see what makes it different.

The retro look for me is unlike anything I have seen in a modern QRP radio.  It frankly looks like it was removed from an Apollo Command Module.  From the front meter to every knob and switch, this radio just begs to be fiddled with.  And each knob and switch serve a function that means no longer needing to dig through menu after menu to find where the narrow filter is switched in because of nearby QRM, or so I can slow down when my CQ POTA is responded to by a slower CW call.

The speaker is located on the (left) side of the radio, a feature many smaller QRP radios don’t have, though headphones can be used via a front mounted jack.  The radio sounds great – I think the radio’s case provides a nice sound chamber.

The TR-45L comes with a couple of options, neither of which I chose to add to my order.  One is a built-in rechargeable battery (5200 mAh), and the other an antenna tuner.  I have plenty of batteries, and normally use resonant antennas.

With the Monday late morning temperature approaching 70 I packed the car with radio gear, and my wife, and we headed out to Island Lake State Recreation Area (POTA K-3315) to activate this park with the TR-45L for the first time.  My wife is not a ham but often comes with me to POTA activations.  While I set up, activate, and then pack up, she enjoys the outdoors with a magazine and crossword puzzle, and sometimes, like today, a light lunch.  Usually, once the activation is complete, we’ll go for a hike on park trails.

Island Lake is about a 20-minute drive from my house.  Its 4000 acres is a mix of open fields and hardwood forests surrounding Kent Lake and the Huron River.  Today it was warm enough that someone was using a paddle board on the lake.

I have found a set of picnic shelters on elevated ground overlooking Kent Lake as a great place from which to activate.  I worked North Pole Alaska from this location on 20M CW using my IC-705 with 10W into an EFHW last May.

Once at the shelter I set up my EFHW (KM4ACK kit) in a sloped configuration using a conveniently located mature tree and my throw line.  It was roughly in an East/West orientation. Over the preceding weekend, I added PowerPole connectors to the provided power cord, and programed both internal CW keyer memory slots.  These are activated using either dit or dah paddle when I toggle Play using the provided switch.   Of course, I did a little POTA hunting using the home antenna to familiarize myself with the TR-45L’s operation.  The learning curve is short with nothing hidden deep behind any menus.

With the radio and antenna ready to go, I set up HAMRS on my iPad, spotted myself on the POTA website, and started calling CQ POTA on 14.0615.  Over the course of the next 35 minutes, I worked a total of 30 stations on 20M and 40M (most on 20M) at which point I basically ran out of hunters.  Not bad for a weekday afternoon.  I packed up and went on a couple mile hike with my wife.

The TR-45L is an absolute joy to use.

I forgot to put it in CW Narrow mode at first, and when nearby QRM popped up, I was able to add this in with the throw if one switch. QRM gone.  (Note, this setting – wide vs. narrow filtering – must not be retained after the power is shut off or the battery is disconnected.)

It sounds wonderful.  I used the side speaker the whole time as my wife doesn’t seem to mind, although the random guy who wandered in with a laptop to get some work done on a warm fall day decided to find somewhere else to work.  There are front mounted jacks for headphones, paddles and a straight key.  Even a rear mounted jack for an external speaker.  The built-in speaker can be turned off and on via a toggle switch.  The two CW memory slots are easy to fill using your paddle.  The front meter can show power output or SWR based on toggle switch position, and you are alerted to high SWR via a front mounted red LED.

I waited a while to get this radio.  Recent supply chain issues caused unexpected delays, but it’s available for order now in factory-built form and most definitely worth the wait.  Kits will eventually be available.  Check out all the TR-45L details here.

Mark Yergin

W8EWH

Field Reports, Morse Code, News, Portable, POTA, QRP, QRP Radios, Videos

An evening POTA activation with the Penntek TR-45L, a pileup, and buddy Steve

14 Comments

 

Last month, my buddy Steve (VA3FLF/KM4FLF) was in North Carolina visiting family and we hoped to meet up in person at some point.  Thing was, both of our schedules were pretty busy with various family activities and projects.

On Wednesday, September 21, 2022, we found an opening in the evening that coincided with a trip to do a little caregiving for my parents. We agreed to meet up at Lake Jame State Park (K-2739) which was on my way and also convenient to Steve.

Steve is also a fan of Parks On The Air, so why not fit in an activation? No better way to spend time with POTA family than at a POTA park, right? Right!

I arrived at the park around 18:30 local (22:30UTC) and set up MM0OPX’s 40 meter end-fed half-wave.

I only had one radio with me at the time: my prototype Penntek TR-45L.

At that point, the TR-45L had not yet been released and was in the very final stages of Beta testing. I was waiting on one more firmware update to bring the radio up to what would eventually be version 1.

Since I was still waiting on the final update that sorted out the CW message memory recording function (and boy did it–the final version is benchmark) I didn’t use message memories during this outing.

I offered Steve a hand at the TR-45L, but he claimed he wasn’t a heavy CW operator–he was interested in helping me with logging, though. How could I refuse that?

Continue reading An evening POTA activation with the Penntek TR-45L, a pileup, and buddy Steve →

Events, Field Reports, Hams, Morse Code, News, Portable, POTA, QRP, SOTA

W4G SOTA Fall Campout Recap

7 Comments

As I noted last week, I participated in the W4G SOTA campout at Lake Winfield-Scott Campground in the Chattahoochee-Oconee National Forest in north Georgia.

In short? It was amazing!

I thought I’d share a few photos and memories…

Campsite and friends

These SOTA campouts typically involve an announcement via the W4 SOTA group then we all make individual reservations at the chosen campground. Since we’re not reserving the whole campground as a block, we tend to share our individual camping sites with others who might not have been able to reserve a spot.

At Lake Windfield Scott campground, the SOTA group did reserve one large group campsite, but only a couple months ago it was canceled by the park service due to a trail maintenance group that needed it.

Typically, I camp with my friend Monty, but he had other family plans that weekend.

When I found out my buddy Joshua (KO4AWH)–the fellow behind Tufteln products–needed a spot to pitch his tent, I offered up my site.

As you can see in the photo above, both of our tents fit on the tent pad with absolutely no extra room to spare. 🙂

It was such a pleasure getting to know Joshua. What a kindred spirit and super nice fellow.

KO4AWH (left) and K4SWL (right) on the summit of Black Mountain.

We ended up doing all of our SOTA activations together as you will see in upcoming activation videos and field reports.

Joshua is as pack and organization obsessed as I am. A proper pack nerd! I really enjoyed checking out his bags, cases and all of the brilliant accessories that are a part of his field kits.

He brought both an IC-705 and TX-500 along for the ride. He logs in the field using the HAMRS app (same one I do) but on an iPad Mini (see photo above) and I must admit that the size of the iPad mini is nearly ideal–much better than a phone for logging.

He also used the SDR-Control app to connect wirelessly with his IC-705 and operate digital modes.

Summits

We activated a total of three summits during the weekend (Big Cedar, Black Mountain, and Yonah Mountain). It would have been easy to activate six or more if that was the goal–the area is chock full of accessible summits.

Continue reading W4G SOTA Fall Campout Recap →