Category Archives: POTA

Antennas, Field Reports, Morse Code, News, Portable, POTA, QRP

Pairing the Elecraft KX2 and AX1 with a little QRP Coffee for some proper portable POTA fun!

16 Comments

Driving home on Thursday, December 8, 2022, I popped by Food Matters in Morganton, NC and grabbed one of their amazing curried chicken salad wraps.

I sat in the car and listened to a podcast as I ate a late-ish lunch. I looked at my watch and sorted out what time I needed to be back at my home in the mountains. After a little mental math, I realized I had about 90 minutes to fit in a little radio fun.

Where to go on a rainy day?

Tuttle Educational State Forest (K-4861)

Since it was a Thursday and I knew Tuttle would be open, it was really a no-brainer. Tuttle is only an 8 minute drive from the parking lot at Food Matters, so I made my way to Playmore Beach Road!

En route, I made a mental inventory of what radios and antennas I had packed in the car. I knew I had my KX2 and although its internal battery had already powered me through three or four activations already, I knew there’d be enough charge for one or two more.

Also, since it was raining, I thought it would be the perfect day to set up under Tuttle’s excellent picnic shelter.

As for an antenna, I remembered putting the AX1 in my antenna box, so why not pair the two and operate in the dry?

Coffee Time

Funny, but after I started recording the activation video (below), I convinced myself that I needed to make some coffee. I pulled out my field coffee kit and set it up for a quick brew.

The park had completely shut off all water fountains and closed the rest room area, so there was no place to get fresh water. Fortunately, I had *just* enough water left in my water bottle after lunch. Almost the perfect amount for a cup of coffee but no more.

This wasn’t a planned cuppa’ so I used one of my last Starbucks Via coffee packs. Had I planned this in advance, I would have ground some beans at home and made a pour-over coffee.

That’s okay, though. The Starbucks packs are better than no coffee at all.

Field Coffee Kit

If you’re curious about the contents of my field coffee kit, here’s the list:

Continue reading Pairing the Elecraft KX2 and AX1 with a little QRP Coffee for some proper portable POTA fun! →

Field Radio Kits, Kits, Morse Code, News, Portable, POTA, QRP, Reviews

Testing a new QCX-Mini Field Kit built in an Evergreen 56 Watertight case

11 Comments

In early November, I happened up a new waterproof case called the Evergreen 56. As with Pelican cases, it’s waterproof and also made in the USA. Like Nanuk cases (that are also waterproof and made in Canada) Evergreen cases have a built-in locking mechanism to keep the latch from accidentally opening during transport.

I thought the price for the Evergreen 56 at $28 US was fair and in-line with the Pelican 1060 and Nanuk 903 which are similar in size. I grabbed one made of a clear material with one radio in mind: my QCX-Mini!

There are a number of color options available for this Evergreen case, but I like the clear polycarbonate one because it makes it so much easier to see what’s inside (for a quick gear check) but also to confirm that no one part of the kit is being pressed too hard inside the case after the lid is sealed.

After receiving the Evergreen 56, I was very pleased with the quality–again, on par with what I would expect from Pelican or Nanuk.  It is incredibly solid and the seal is watertight.  The Twist Lock Latch (see above) is easy to operate and the case comes with two “keys” for adjusting the inner lock.

The Evergreen case has a soft egg crate-like rubber boot interior as opposed to the pick foam material you’d typically find in a water tight case. The case also has a hammock-like rubbery webbing on the inside of the lid that can be used to organize smaller contents (I knew instantly I’d use this to hold the antenna!).

The QCX-Mini fits in the Evergreen case perfectly–this was no surprise–but I was eager to see if my other station components could also fit. Note that I didn’t buy anything specifically to be used in this case; I used components I already owned. I could minimize the contents even further if I used a smaller battery, antenna, and key.  Here are the components of the first version of the QCX-Mini Field Kit: Continue reading Testing a new QCX-Mini Field Kit built in an Evergreen 56 Watertight case →

Antennas, Field Reports, Morse Code, News, Portable, POTA, QRP, SOTA

Testing a new Tufteln knee board and antenna during this beautiful SOTA activation on Mount Mitchell

13 Comments

On the morning of November 4th, I woke up with one thought on my mind: “I need to activate Mount Mitchell before it’s too late!”

It’s not like Mount Mitchell was going to disappear, but I knew I was already on borrowed time since the long section of the Blue Ridge Parkway I use to drive to Mount Mitchell from Asheville typically closes in the early part of November for weeks at a time. The park itself will close to guests too–in fact, last year, it closed its gates as I drove out of the park! There are often other roads open to Mitchell in the winter, but they’re very much out of the way for me and frankly, weather can shift and the park close at the drop of a hat.

As the crow flies, Mount Mitchell is actually very close to my QTH. If I wanted, I could hike there directly from my home. I’ve yet to do this, however, because with the 3,000′ elevation change and the anything-but-direct trails that skirt the Asheville watershed, I’d need a full day or more to hike it one way. I will for sure do this sometime, but only when I can pack appropriately and reserve a campsite.

Morning drive

As soon as I surfaced that morning, I check the weather map. I noticed that the temp at Mount Mitchell was actually slightly higher than at my QTH. I looked out the kitchen window and could see fog in the valley. This meant one thing: inversion!

When we have inversion, the cold air is pushed down into the valley and warmer air can be found at higher elevations. The flip opposite of what you’d typically expect.

I ate a quick bite, grabbed come coffee, and hit the road.

As I drove past Warren Wilson College’s farm, it was absolutely gorgeous. I had to stop and take a photo or two [click images to enlarge].

The drive up to Mount Mitchell on the BRP was ideal: clear skies and quite warm!

Mount Mitchell State Park (W4C/CM-001 and K-2747)

In fact, I felt like I really struck it lucky that day. I didn’t even need a heavy jacket or gloves. Continue reading Testing a new Tufteln knee board and antenna during this beautiful SOTA activation on Mount Mitchell →

Antennas, Field Reports, Morse Code, News, Portable, POTA, QRP

Pairing the Elecraft KX2 and Chelegance MC-750 for a quick QRP POTA activation

16 Comments

After a fun “discovery” activation with the TEN-TEN R4020 on the morning of November 12, 2022–click here to check out that report and video–I realized I had just enough time to squeeze in another activation on my way back to the QTH.

I picked Lake James State Park (K-2739) because it was the most conveniently located; only a 20 minute detour.

When I arrived, the park was very quiet even though it was a Saturday no doubt because the ground was still saturated after the two days of rains we received from the remnants of Hurricane Nicole.

I grabbed my radio gear: the Elecraft KX2 and the new MC-750 vertical antenna sent to me (at no charge) by Jesse at Chelegance. This was only the second time I’d used the antenna–the first time was with the X5105.

I knew the MC-750 would be quick to set up and that was a good thing because I only had a max of about 45 minutes for the entire activation including set-up and take-down.

I walked down to a picnic table by the lake and deployed the station.

The MC-750 took me all of three (casual) minutes to set up.

Next, I set up the Elecraft KX2 and my CW Morse Outdoor Paddle with Steel Base for one-handed picnic table operating.

Of course, I also needed to prepare a log sheet even though I planned to live log everything in the HAMRS app on my phone. Continue reading Pairing the Elecraft KX2 and Chelegance MC-750 for a quick QRP POTA activation →

Articles, Morse Code, News, Portable, POTA, QRP, QRP Radios, Reviews, SOTA

A review of the LnR Precision Mountain Topper MTR-4B ultra-portable QRP transceiver

15 Comments

The following article originally appeared in the November  2022 issue of The Spectrum Monitor magazine:

A Review of the LnR Precision Mountain Topper MTR-4B V2

by Thomas (K4SWL)

I confess, there is something that I’ve come to believe is almost a rite of passage in the SOTA (Summits On The Air) community. And, no, I’m not talking about activating an All Time New One (ATNO) summit, or completing a particularly challenging activation on a snow-capped peak.

I’m talking about owning one of the iterations of the amazing “Mountain Topper” pocket-sized QRP CW transceivers designed by Steve Weber (KD1JV).

This little radio first caught my attention at a Four Days In May (FDIM) QRP conference over a decade ago: a ham friend in the SOTA community proudly showed me a very early version of the Mountain Topper that he built from a kit. The first thing that struck me was how impossibly small and extraordinarily lightweight it was. But when he showed me the 9-volt battery he used to power it––a power supply not only small, but convenient––I was mesmerized.

Over the years, the Mountain Topper has evolved.  There have been many models, ranging from two bands to five. To my knowledge, they’re no longer offered in kit form, but LnR Precision manufactures and tests these in North Carolina, and they’re better than ever in terms of features and performance.

At present, the MTR-4B V2––the second version of the four-band Mountain Topper––is the only model in production, and if you’re hoping to acquire one, due to supply chain issues (at time of publishing) there’s a rather long wait time. They retail new for $350 US, and frankly, the used ones I’ve seen posted in ham radio classifieds ads have been equal to, or even over, the listed price for a new rig.  Obviously, demand for these radios is much higher than supply.

So, how could it be that this minuscule QRP radio performs well enough to produce some serious DX from a remote summit…so well, in fact, that people are willing to wait in line for one?

Magic or method?

As any CW operator will tell you, the magic is in the mode. CW is such an efficacious mode that it cuts through the ether like a knife, even when conditions are less than favorable.

Obviously, pint-size radios like the Mountain Topper are QRP––low power––so designing them around such a simple mode is a very smart choice. CW transceivers are much less complex than a similar SSB transceiver, thus have less components, less mass, and are in general more affordable (when compared to those with similar receiver performance).

My comprehensive MTR-4B field kit (the MTR-4B is in the mesh pocket).

In addition, the Mountain Topper is designed with the field activator in mind:  specifically, SOTA activators, but of course, POTA (Parks On The Air), WWFF (World Wide Flora and Fauna), IOTA (Islands On The Air), or any other popular “-OTA” field activity. As a field activator in one of these programs, you are the DX. This means chasers and hunters are actively seeking your signal, and thus you are not competing with blowtorch stations to punch through a pileup.

I can also assure you that standing on a tall summit also gives you a brilliant starting point for your QRP signal. Some of the best DX I’ve ever worked has been from a summit.

So, for the average CW SOTA activator, QRP is preferred because QRO simply isn’t necessary––indeed,  in my opinion it’s a bit of an overkill. At least that’s been my experience now with my few hundred SOTA, POTA, NPOTA, SOTA, and even one Lighthouse On The Air activations.

So this brings us back to the wee Mountain Topper series and the model being reviewed here in the pages of TSM: The Mountain Topper MTR-4B. Continue reading A review of the LnR Precision Mountain Topper MTR-4B ultra-portable QRP transceiver →

Antenna Tuners, Antennas, Field Reports, How To, Kits, News, POTA, QRP

How to tune: Pairing the Emtech ZM-2 manual ATU with the Mountain Topper MTR-4B on the Blue Ridge Parkway

21 Comments

You’ve no doubt heard me brag about the Emtech ZM-2 ATU in previous field reports. I think it’s an accessory every field operator should have.

The ZM-2 is a very capable manual transmatch/ATU and is also one of the more affordable tuners on the market. It’s available as both a kit and a fully-assembled unit. Both well under $100.

I do believe the “manual” part of the ZM-2 scares off some and it really shouldn’t. We are used to simply pressing a button these days and allowing our automatic ATUs to do all of the matching work for us.

Manual ATUs do require some amount of skill, but truth is, the learning curve is very modest and intuitive.

Manual ATUs require no power source in order to operate–you adjust the L and C values by hand–thus there’s never a worry about the ATU’s battery being depleted. They also are easy to manipulate outside the ham bands because they require no RF in order to read the SWR–you simply make adjustments to the L and C until you hear the noise peak.   This is why many shortwave broadcast listeners love the ZM-2 so much. It’ll match most any antenna you hook up to it!

I also argue that everyone should have a portable ATU even if you operate resonant antennas. Think of an ATU as a First Aid Kit for your antenna: if the deployment is less than ideal, or if you damage it in the field, an ATU can help you find an impedance match your radio can live with. ATUs have saved several of my activations.

Mountain Topper MTR-4B V2

I’ve also mentioned that I’ve had an MTR-4B on loan from a very kind and generous reader for most of the year. He was in no particular hurry for me to send it back to him, but I wrote him in early November and said, “I’m doing one more activation with this little rig, then I’m shipping it to its rightful owner!”

He had a request, and it was a good one:

I think it would be a good little twist to the usual YouTube if you paired a random wire with the ZM-2 and the MTR-4B…showing how to tune the ZM-2 with a Mountain Topper…

I really liked this idea, so I made plans to to hit the Blue Ridge Parkway nearby and give it a go.

The first time I tried this in the field, I paired the MTR-4B with one of my Sony amplified speakers because the MTR-4B 1.) has no internal speaker and 2.) has no volume control. During the video, however, I realized that there simply wasn’t enough audio amplification so that the viewer would be able to hear a noise peak as I manually tuned the ATU. I decided to scratch that video and just do the activation on my own. I really wanted to show how the tuning process worked in the video.

I went back to the field the next week–on November 10, 2022–with my Sony in-line digital recorder knowing it would be much easier to hear how the L/C changes affected the band noise. Continue reading How to tune: Pairing the Emtech ZM-2 manual ATU with the Mountain Topper MTR-4B on the Blue Ridge Parkway →

Field Reports, Morse Code, News, Portable, POTA, QRP, QRP Radios

Cheap POTA thrills with my new-to-me TEN-TEC R4020 QRP CW transceiver!

11 Comments

Last year, I made an impulse purchase.

You’re shocked, right–?

Right.

You see, I did something I’d never suggest others do: in a moment of boredom, I casually cruised the classifieds listings found on QTH.com.

One of the very first listings was for a TEN-TEC R4020 CW QRP transceiver. The price, if memory serves, was $120 (+/- $10) shipped.

Ten-Tec Model R4020 (Product Photo: Ten-Tec)

Without even thinking, I sent a message to the seller:

“I’ll buy it if it’s still available!“

He responded noting I was the first to reply to the ad, so it was mine if I wanted it.

I did, of course.

The R4020 arrived that same week, I opened the box, applied power to confirmed it powered up, then placed it on the top shelf in my shack.

At the time, I had a mountain of review and evaluations in process along with several articles in the pipeline for TSM and one for RadCom, and simply didn’t have time to properly explore the R4020. I thought it might be fun saving it as a little reward for meeting my deadlines.

Then, frankly, I just forgot about the R4020. This spring was a very busy time for me family-wise, then I spent the summer in Canada, and most of this fall has been all about catching up after having spent the summer in Canada. Funny how that works!

Fast-forward to November 11th, 2022 when I was packing a field radio kit to take on an overnight trip and I noticed the R4020 on the top shelf! My reward, finally–!

I quickly packed the R4020 in my Spec-Ops Order Pouch along with a 3Ah Bioenno LiFePo4 battery and a power cable.

South Mountains State Park (K-2753)

On Saturday, November 12, 2022, I jumped in the car and headed to South Mountains State Park with the R4020.

This past year, I’ve mostly set up at South Mountain’s Clear Creek Access on the west side of the park, but this time I decided to make my way to the equestrian picnic area near the main entrance and ranger station.

Continue reading Cheap POTA thrills with my new-to-me TEN-TEC R4020 QRP CW transceiver! →

Field Reports, Morse Code, News, Portable, POTA, QRP, Videos

Mountain Topper MTR-3B: A quick POTA activation before leaving camp!

10 Comments
View from Yonah Mountain the previous day.

As I mentioned in previous field reports, the W4G SOTA Campout was amazing fun this year.  I enjoyed hanging with Joshua (KO4AWH) as we activated a total of three summits and a few parks–plus it was great meeting so many fellow SOTA activators at the Saturday evening potluck!

On Sunday morning, October 16, 2022, it was time to pack up the campsite and hit the road.

Although I was a little pressed for time, I decided to fit in one more activation as Joshua packed up his tent and before we took down the 40 meter Tufteln end-fed half-wave.

Chattahoochee-Oconee National Forest (K-4473)

Fortunately, our campsite was within Chattahoochee-Oconee National Forest and since all I needed to do was to connect my rig to our campsite antenna, setup took all of two minutes.

I pulled out the Mountain MTR-3B for this activation. It had been quite some time since I used this wee radio because I had only recently finished a review of the MTR-4B V2 (look for that review on QRPer.com very soon).

The MTR-3B is now permanently at-the-ready inside my MTR-3B ultra portable field kit, but since there was already an antenna and key in place, I only needed the radio, power cord, logging items, and battery.

Continue reading Mountain Topper MTR-3B: A quick POTA activation before leaving camp! →

Field Reports, FT8, Guest Posts, Hams, Morse Code, News, POTA, QRO, QRP, SSB

Guest Field Report: K3FAZ, K3STL, and K3ES POTA in the Cold with a Bonus Gear Report

7 Comments

Many thanks to Brian (K3ES) who shares the following field report:

K3FAZ, K3STL, and K3ES POTA in the Cold with a Bonus Gear Report

K3STL and K3ES at the entrance to K-0621.

by Brian (K3ES)

K3ES Perspective

Saturday November 19 dawned clear and cold in northwest Pennsylvania, but the truth is that I was up well before dawn.  The third Saturday of each month, I try to make the 2 hour drive south to help with Skyview Radio Society’s monthly Volunteer Examiner (VE) testing session for new or upgrading licensees.  Clear skies (which matched the forecast) meant that road conditions would not be a problem.  So, shortly after 5 am I pointed the truck south.

One of the creature comforts I appreciate about our VE session is meeting for breakfast before the test.  It was obvious on arrival at the restaurant that the VEs would greatly outnumber the test candidates, but many hands make light work.  Coffee and an omelet definitely helped fuel the effort.  Since the test sessions normally last less than 2 hours (and that held true this time), three of us VEs had made plans for post-test session POTA.

Before launching into the field report, let me acknowledge that K3STL’s photography was instrumental in providing a report with visual appeal.  Personally, I almost always forget to take the pictures.

POTA Plan

John “Tall Guy” K3STL, Steve K3FAZ, and Brian K3ES in the parking lot at K-0621.

The plan for the day was to attempt activation of two POTA sites, Beechwood Farms State Conservation Area (K-0620) in suburban Pittsburgh, and Todd Sanctuary State Conservation Area (K-0621) about 20 miles further to the northeast.  John “Tall Guy” – K3STL and Brian – K3ES would do a short activation of K-0620, then meet Steve – K3FAZ at K-0621 for the rest of the afternoon.

Knowing it would be a cold day for mid-November (temperatures peaked for the day just barely above freezing), each of us made plans to adjust for operating from our vehicles. That meant that we would be doing parking lot activations at both locations. While we each normally activate with slightly different operating styles that are suited to outdoor POTA operations, some tweaks made it possible to have wind and weather protection for this outing.  In hindsight, it was a perfect choice.

Operating Methods

K3FAZ works an SSB contact.

K3FAZ operated his treasured Kenwood TS-50 using SSB mode with an EFHW antenna in a tree.  Rather than setting up with a table and chair, Steve configured his station to fit in the front seat of his SUV. Continue reading Guest Field Report: K3FAZ, K3STL, and K3ES POTA in the Cold with a Bonus Gear Report →

Field Reports, Morse Code, News, Portable, POTA, QRP, Videos

Quickie Field Report: Pileups at Desoto Falls with the Penntek TR-45L and two 28 foot wires

12 Comments

I mentioned in a previous post that I’m quite behind publishing activation videos. Much of this has to do with the fact that I’ve been a pretty busy activator (by my standards) the past couple of months.

While I don’t make field reports and videos for each of my activations, I usually do one or two per week. Two is typically the max I can post because my field reports take 3-4 hours each to write-up and publish; it can be difficult carving that kind of time out of my busy schedule!

In order to catch-up, I’ve decided to post shorter format field reports from time-to-time; especially for reports like this one where I give quite a lot of info and detail in my activation video.

Desoto Falls National Recreation Area (K-7473)

In the previous field report (from October 14, 2022), I recounted two amazing SOTA activations in north Georgia (Big Cedar and Black Mountain) with my buddy Joshua (KO4AWH) during the annual W4 SOTA Fall Campout.

Immediately after wrapping up our SOTA activations on Black Mountain, we decided to hit a park on the way back to the campground. Desoto Falls National Recreation Area made for a short detour and a nice way to relax after a few miles of hiking that day.

We pulled into the parking area of Desoto Falls and set up our stations in the picnic area placing some distance from one another to help with any interference.

I pulled out my trusty Penntek TR-45L and two 28’/8.5m lengths of 24 gauge wire.  I extended the radiator vertically and unrolled the counterpoise on the ground. The wires were connected to the binding posts on the back of the TR-45L (red=radiator, black=counterpoise). I used the built-in manual Z-Match tuner to match the impedance in short order.

Continue reading Quickie Field Report: Pileups at Desoto Falls with the Penntek TR-45L and two 28 foot wires →