Category Archives: Portable

Announcements, News, Portable, Product Announcements, QRP Radios

The new LNR Precision LD-11 transceiver is essentially general coverage

1 Comment

[FYI: This is a re-post from my blog, the SWLing Post]

LNR-Precision-LD-11

A couple weeks ago, LNR Precision sent me their new LD-11 Digital Direct Conversion QRP transceiver on loan for review.

The LD-11 is basically a small, tabletop SDR transceiver. It’s like a miniature, simplified version of the Icom IC-7100 I’ve also been evaluating.

The LD-11 is an all-mode and all-band transceiver–meaning, it includes SSB, CW, CW-R, Digi, AM and FM modes on all amateur radio bands (160 – 10 meters).

Though the LD-11 isn’t advertised as having a general coverage receiver, it will indeed tune the entire HF band.

You do this by entering the LD-11’s administration mode. LNR describes this in the LD-11 product manual, but suggests you contact them for help the first time you do this. In the admin panel, you’ll find functions that allow you to set the band edges on each amateur radio band.

For a preliminary test of broadcast reception, I moved the lower band edge of the 30 meter ham radio band to 8.2 MHz.

LNR-Precision-LD-11-front panel

After saving the settings and re-starting the LD-11 in normal operation mode, I could then tune the entire 31 meter broadcast band on the LD-11.

Hypothetically, you could either widen each amateur radio band to include adjacent broadcast bands, or you could simply set one of the ham bands to include the entire HF spectrum. To make it easier to navigate and tune through the bands, I’m choosing the former method over the latter.

Since the LD-11 has a proper AM mode, broadcasts sound great–especially via headphones!

Proper AM filters for broadcast reception!

Better yet?  The AM filter width can be widened to an impressive 9.6 kHz! Woo hoo!

LNR-LD-11-Shortwave-AM

The LD-11 has four filter slots: F1, F2, F3 and F4.

The F1-F3 slots can be set to a fixed user-defined widths (common widths are default).

F4 can be altered to any available filter width without having to enter the admin mode of the transceiver. Simply press the “F” (blue function button) and the FILTER button simultaneously and use the encoder/tuning knob to specify the filter width in .1 kHz steps. Pressing the F and FILTER button simultaneously again, will save your filter width for the F4 position.

I’ve been using the F4 filter position for widths between about 8.2 and 9.6 kHz in AM.

It’s still early days with the LD-11, but I’m enjoying this little transceiver immensely. It reminds me of one of my favorite QRP transceivers of yesteryear: the Index Labs QRP Plus (though the LD-11 is much smaller, more versatile and has a much better front end than the QRP Plus!).

LNR Precision sold out all of their first run LD-11 units within moments of having announced availability. I’m willing to bet they’ll bring a few LD-11s to the upcoming Dayton Hamvention, though.

Check inventory status and view LD-11 details on LNR Precision’s website. 

Morse Code, Portable

Steve’s new “Station Base” for the torsion bar key

Leave a comment

tbp2_threeqrtleftweb

Many thanks to Steve (W1SFR) who writes:

Hi Tom,

Here’s a pic of the new “Station Base” for the portable torsion bar key. The rubber feet unscrew and can then be attached to the key base. It’s really solid on the desk but the whole thing only weighs about 12oz.

http://kx3helper.com/single-lever-portable-tb-key/#jp-carousel-596

72/73,
Steve—W1SFR

That’s one handsome little key there, Steve. I like the base addition. Thanks for sharing!

Announcements, News, Portable, Product Announcements, QRP, QRP Radios

LRN Precision announces two new QRP transceivers: the LD-11 and MTR5B

1 Comment

LNR-MountainTopper-LD11-Announcement

LNR Precision announced two new QRP transceivers this weekend: the MTR5B and LD-11.

Below, you can find details I pulled from LNR’s press release and website for both units:

LNR-Precision-LD-11

The LD-11

The LD-11 is a new 11-band QRP transceiver based on the LNR’s LD-5 transceiver. The LD-11 covers from the 6 meter band down to the 160 meter band. A new feature on this model is a built-in panadapter. AM/FM/SSB and CW modes are all included.

Here is the description from LNR’s website:

The new LD-11 is Digital Direct Conversion, SDR type, build-in CPU (SM32a) DSP radio in which RF signals are directly converted to a digital data via differential and balanced A/D converters. This enables direct sampling with extremely low phase and floor noise.

The DSP is unique and features two independent channels. It also employs a unique differential algorithm within the software which is applied for IQ processing of the channels with phase suppression of the unwanted side-band channel.

The balanced ADC and DAC gives additional noise floor reduction and the receiver can handle interfering signals that are 100 dB stronger than the desired signal at a frequency separation of 10 kHz, and is about 130 dB stronger at 50 kHz separation. As the receiver and transmitter are using the same DSP channel, there is no gap between the receiver performance and the transmitter performance. Thus, there is a clean neighborhood on the bands. At the development stage, our intentions were motivated by the TX side-band noise of existing SDR manufacturers, so our aim was to fully equalize our transmitter to have noise performance that is compatible with the best modern receivers, or even better. After a arduous year of development , we think we achieved it!

This 11+ band radio is based on the LD-5, which has proven to be one of the most exciting QRP transceivers introduced in the last few years. Quite frankly, the performance rivals high end units offered by other manufactures at a much lower price point. Our motto is that we make QRP transceivers that you will want to take out in the field (without fear of breaking the bank).

LNR-Precision-LD-11-L-Side LNR-Precision-LD-11-R-Side

Note: I will review the LD-11 in the coming weeks and post images and notes here on QRPer.com.

MTR5B

The MTR5B

The new MTR5B 5-Band Mountain Topper is a fully-assembled 5-band CW transceiver KD1JV designs “Steve Weber” kit. The following are specifications/features from the LNR website:

40M, 30M, 20M, 17M, 15M
Size: 4.337″L x 3.153″W x 1.008″T
Weight: approx 6.4 OZ.

Features:

  • Switch selected 40/30/20/17/15 meter bands (no band modules to lose or change out)
  • Wide operating voltage range, 6 to 12 volts 15 ma Rx current at 12V supply
  • Efficient transmitter. Low current with 4W output
  • LCD display
  • Push button or Optional rotary tuning
  • 24 hour clock built in, with battery back up
  • Three 63 character programmable message memories
  • Message beacon mode with adjustable pause time

MTR5B-1

If you were lucky enough to grab a first production unit of either of these radios, I would love to post your overview/review! I’m looking forward to checking out the LD-11.

Announcements, News, Portable, QRP

W1SFR’s New Portable Torsion Bar Key

Leave a comment

TBP3qtrLftFront(Source: W1SFR)

New Portable Torsion Bar Key Announced by W1SFR
Jan 12, 2016—Sudbury, VT

Many of you know W1SFR from the End Fed random wire antennas that have become very popular with QRP ops around the world. The antenna design is not new and has handed down by many hams over many years, but Steve has managed to create quite a following due to his attention to construction and only using the best of materials…all at a very reasonable price.

Now he has applied that same attention to detail and high value to his new “TBP” (Torsion Bar Portable) key. Torsion bar keys use a unique combination of construction and design to provide the CW op with a different experience…one that users are saying very good things about. All of his keys feature a contact system that allows the key lever to make a “softer” contact allowing the very slightest movement when the contact post hits the stainless contact. That not only makes the key feel less “mechanical”, but also makes it much more quiet…a feature these keys are known for.

“ I make each key by hand and top them off with my trademark exotic wood finger pieces with a signature Mother-Of-Pearl dot on each finger piece…no CNC plastic here. The torsion system allows very close contact spacing and effortless CW. The TBP represents a much smaller version of my larger keys, designed to be at home in the field or in the shack.”

The new portable key follows W1SFR’s TBKII, a single lever key and the TBSK, a torsion bar straight key.

You can see all of the keys at W1SFR.com.

Note: Steve also tells me that he lowered his prices for the Christmas season and has decided to extend them for the month of January. Click here to check out his product line.

Events, Portable, QRP, Uncategorized

Upcoming QRP Field Event:
“Freeze Your B___ Off”, Saturday, February 6

Leave a comment

The Arizona ScQRPions (link) annual winter QRP sprint, “Freeze Your B___ Off“, happens on Saturday, February 6 this year. FYBO is an event in which QRPers are encouraged to take their stations afield in the winter, and the colder it is “at the key”, the larger a score multiplier a participant gets.  Complete rules for FYBO can  be found here:

http://www.azscqrpions.org/FYBO2016_Rules.htm

My logbook tells me I first participated in FYBO in 1997 and that I had a blast, and I’ve participated in FYBO almost every year since then.

With this year’s strong El Niño and weird weather there’s no telling at this point whether a particular location will be unseasonably warm or bitterly cold, wet or dry, sunny or snowy but whatever the weather you find on February 6, take your station outdoors and have some wintertime radio fun!

Grab And Go, News, Portable, QRPers

Scott’s Elecraft KX3 Go-Box

2 Comments

[Note: this article was originally posted on my shortwave radio blog, The SWLing Post.]

Many thanks to Scott (AK5SD) who shares the following photos and bill of materials for his custom Elecraft KX3 go-box:

IMG_0531 IMG_0534

IMG_0532 IMG_0535 IMG_0537 IMG_0536

Bill of materials

The panel was custom laser cut by Front Panel Express. I have the CAD
file and I’m willing to share it with anyone who wants to reproduce my effort.

Amazon.com
Case B&W Type 1000 Outdoor Case with SI Foam
You won’t use the foam, so you can buy the version without it if you can find it cheaper.

Battery Anker Astro Pro2 20000mAh Multi-Voltage (5V 12V 16V 19V)
Portable Charger External Battery Power Bank
Avoid look alike batteries and the next generation model from Anker. The newer Anker
battery is only capable of delivering 1.5A from the 12V supply. Two look alike batteries
I tried did not have the auto-off feature that the Anker does.

Vetco.net
ACC2 and I/Q Jacks 2 x 2.5mm Stereo Jack Panel Mount (PH-666J-B)
Phone, Key, and ACC1 3 x 3.5mm Stereo Jack Panel Mount (High Quality) (PH-504KB)
Mic Jack 1 x 3.5mm 4 Conductor Jack Panel Mount (PH-70-088B)
12V IN and CHG IN 2 x 2.1mm DC Power Panel Mount Jack (PH-2112)
12V OUT 1 x 2.5mm DC Power Panel Mount Jack (PH-2512)

You also need plugs and wire for interconnects. I bought some 2.5mm (CES-11-5502)
and 3.5mm (PH-44-468 for stereo, PH-44-470 for 4-conductor) audio cables with right
angle plugs and just cut them to use for the signal lines going to the KX3. I did the same
thing for the 2.5mm (PH-TC250) and 2.1mm (PH-TC210) power cables. A couple of
caveats are in order. The Phone, Key, and ACC1 interconnects require low profile
right angle connectors. The cables I listed above won’t work. Vetco part number
VUPN10338 will work. The power cables I’ve listed above use 24 gauge wire. This
is a little light, but the runs are small so I think it is OK. You can use higher gauge
cables if you can find a source.

USBfirewire.com
USB OUT USB 2.0 Right Angle Extension Cable (RR-AAR04P-20G)

Digikey.com
L Brackets 8 x Bracket Rt Ang Mount 4-40 Steel (612K-ND)
These L brackets are used to mount the KX3 to the panel and the panel to the case.
For mounting the KX3, I use a little piece of stick on felt on the bracket to protect the
KX3’s cabinet from damage. Replace the KX3’s screws with #4-40 Thread Size, 1/4”
Length Steel Pan Head Machine Screw, Black Oxide Finish (see below). For the panel
mounting, use #6-32 Thread Size, 3/16” Length self tapping sheet metal screw. You
may need to cut the tip off in order to not puncture the outside of the case.

RG316 BNC Male Angle to BNC Female SM Bulkhead Coaxial RF Pigtail Cable (6”)
This is not the original interconnect I used for connecting the KX3’s antenna output to
the panel. However, I think it is a better option for new designs. The caveat is that you
will need to verify the hole in the panel matches the bulkhead connector on this cable.
There will be a little loop in the cable when you are done, but that is fine.

Micrfasteners.com
Screws for Sound Card 2 x FMSP2510 – M 2.5 x .45 x 10mm
Screws for KX3 Bracket Mount 4 x MSPPK0404 – 4-40 x 1/4
Screws for Countersunk Panel Holes 8 x FMPPK0403 – 4-40 x 3/16
Screws for USB Connector *** 2 x FMPPK0406 – 4-40 x 3/8

I’m pretty sure these are the right length for the USB connector. I am doing it from memory.

Amazon.com or eBay.com
Soundmatters foxL DASH A Wireless Bluetooth Soundbar (OPTIONAL)

Sonoma Wire Works GJ2USB GuitarJack 2 USB Portable Audio Interface (OPTIONAL)
(Make sure you get the USB model, not the 30-pin model.)

This is optional if you want a built-in sound card interface for a waterfall display using iSDR. Make sure to eliminate the holes in the upper left corner of the panel if you are not installing. You will also need 2.5mm x 10mm screws to mount this to the bottom of the panel (see below).

bhi Compact In-Line Noise Eliminating Module (OPTIONAL)

In my opinion, the KX3’s noise reduction is totally ineffective for SSB communications. This external noise reducing DSP is one solution, albeit an expensive one, to that problem. It is only for SSB, not CW or digital modes. It is also available from GAP Antenna Products.

IMG_0530

Scott: you have done a beautiful job here and have spared no expense to make a wonderfully-engineered and rugged go-box. No doubt, you’re ready to take your KX3 to the field and enjoy world-class performance on a moment’s notice. 

Though I’ve never used them personally, I’ve noticed others who have taken advantage of the Front Panel Express engraving service–certainly makes for a polished and professional front panel.

Again, many thanks for not only sharing your photos, but also your bill of materials which will make it much easier for others to draw inspiration from your design!

AK5SD_QSL_Card

Speaking of designs, when I looked up Scott on QRZ.com, I noticed that he also sports a QSL card (above) designed by my good friend, Jeff Murray (K1NSS). Obviously, Scott is a man with good taste!

News, Portable

Fully-assembled Mountain Topper rigs soon available from LnR

1 Comment

MountainTopperMany thanks to Chris (K4RCH) for passing along this message from Steve (KD1JV) at LnR Precision:

I am pleased to announce that the 3 band Mountain Topper will be commercially available as a fully assembled product from LnR Precision. They should be available for purchuse around the end of January and will cost $250.00

Steve KD1JV

If you’d like a peek at The Mountain Topper manual, click here to download (PDF).

Steve (KD1JV) is well-known for his brilliant QRP transceivers–$250 is a true bargain. Check out AE5X’s blog for more info about the MTR.

Grab And Go, People, Portable, QRP, QRPers, SOTA, Videos

Adam’s Yaesu FT-817ND Go Kit

2 Comments

Adam (KJ6HOT) writes:

“Just wanted to pass on a link to a few videos I put
together in case you’d like to share them, especially the Yaesu
FT-817ND kit I put together.”

Adam has also posted some SOTA activation videos where he uses his go kit (click here to watch).  I’m amazed that Adam manages to fit so much in that small box. Certainly a handy kit for hiking to a SOTA activation!

Thanks for sharing, Adam! I’ll add this link to our Going Portable page. If you have a portable set-up you would like to share, please contact me.

Announcements, Portable, QRP, SOTA, Videos

TX Factor: a brilliant Ham Radio show from the UK

1 Comment

Without a doubt, this is one of the best produced Ham Radio shows I’ve ever seen. I eagerly await TX Factor’s next episode.

Click here to view TX Factor’s website. Thanks for the tip, WD8RIF!

Announcements, News, Portable, Product Announcements, Websites

W1SFR offers an array of products for the QRPer

1 Comment
The KX3 helper non-slip pad.
The KX3 helper non-slip pad tilts your KX3 at an optimum angle for operation.

Steve Roberts (W1SFR) has recently informed me about his new website, KX3helper.com where he sells an array of products for QRPers.

Steve’s product line includes:

  • KX3/KX1 Helper: A foam stand lined with non-slip material to hold the KX3 at a high angle (also other rigs with the controls display on the top surface such as: KX1, HB1-B, TenTec 40/ series, and PFR).
  • QRPad: A foam stand lined with non-slip material for rigs with front-facing controls such as MFJ, OHR, Weber, and Open QRP.
  • FistRest: Neoprene mat covered with non-slip material to provide support when using keys.
  • EndFed 40-6m Antenna: 31 feet long and made with genuine “Wireman” 18 ga Silky Antenna wire. The 9:1 UnUN weighs 3.92 oz. The Antenna wire and lug weigh 3.12 oz. Total weight about 7.34oz.

I’m impressed that Steve tries to source all of his products and materials locally and that his items are quite affordable.

Check out Steve’s site by clicking here.  Many thanks to Graham (G3ZOD) who also informed me about KX3helper.