Category Archives: Morse Code

Field Reports, Kits, Morse Code, New Products, News, Portable, QRP, QRP Radios, Videos

Field Report: My first POTA activation with the Penntek TR-35

16 Comments

My most recent field report and video featured the Penntek TR-35 but it was not my first activation with this fantastic little QRP rig!

I pushed the last field report and activation video to the front of the line so that I could show how CW message memory keying worked in the TR-35’s updated firmware. It was, in my opinion, a major upgrade!

What follows is my field report from April 1, 2022: my first POTA activation with the Penntek TR-35. This video was made a week or so before I learned that WA3RNC was working on the new firmware.

Side note: If you’d like to read my full review of the TR-35, check out the May 2022 issue of The Spectrum Monitor magazine.

Although I’d used the TR-35 in the shack for more than a month I was eager to find an opportunity to take it to the field. April 1, 2022 was that day and I made a little detour to one of my favorite local POTA sites to break in the TR-35… Continue reading Field Report: My first POTA activation with the Penntek TR-35 →

Morse Code, News, Portable, QRP, QRP Radios, Reviews, Software Defined Radio, SSB

A review of the Xiegu X6100 portable SDR transceiver

24 Comments

The following article originally appeared in the April 2022 issue of The Spectrum Monitor magazine:

A review of the Xiegu X6100 portable SDR transceiver

by Thomas (K4SWL)

Do you remember when band scopes and spectrum displays started appearing on radios?  It was a pretty phenomenal innovation. Being able to “see” what was in your neighborhood on a particular radio band was incredibly useful, especially to operators who like to hunt stations, and to DXers who wanted to follow the reply pattern of DX stations running split. Spectrum displays, among other things, gave operators an overall “big picture” of band activity, and it was truly insightful.

Additionally, the advent of SDR (software-defined radio) architecture made not only spectrum displays but also time-based waterfall displays accessible in radios of all price ranges.

From the perspective of both a ham radio operator and a shortwave radio listener, I can tell you that once you become accustomed to the benefits of a spectrum display, when you don’t have one, you feel like you’re cruising the band wearing blinders:  it’s just that essential.

As a result, many hams and SWLs have come to rely on these features. No doubt customer demand has pushed manufacturers to include spectrum displays on almost all new SDR-based transceivers––even portable transceivers!

Enter the X6100

In November 2021, China-based radio manufacturer, Xiegu, started shipping their latest SDR transceiver: the Xiegu X6100.

Xiegu has become quite a household name among HF field operators.  I’ve reviewed both the Xiegu G90 and the Xiegu X5105. The common theme is their affordability, portability, superb built-in ATUs, and impressive feature set. Admittedly, high-end performance––in terms of receiver as well as audio performance––is not their strong suit, but in the field you don’t necessarily need contest-grade performance. I’ve found that both the G90 and X5105 are quite effective and adept in the field and at home. Many a new ham operator has turned to Xiegu products to begin their foray into the world of HF.

Judging by appearance alone, you can tell that Xiegu was targeting the same operators who might consider the Icom IC-705. Cosmetically it’s strikingly similar in terms of knob, screen, and button placement on the front panel.

The X6100 also has Bluetooth and WiFi connectivity, like the IC-705: a first for the sub-$1,000 portable radio market. But unlike the IC-705, this functionality was not in place with the first production run of the X6100. It’s being slowly implemented via X6100 firmware updates.

But in my view, that’s where the similarities with the IC-705 stop. Based on the announced X6100 specifications, I could tell well before the X6100’s release that it would lack many of the features that make the IC-705 such a hit; features like a touch screen, D-star mode, VHF/UHF multimode, built-in GPS, built-in D-Star, built-in repeater directories that can auto-load the repeaters closest to the operator, advanced filter shaping, and so much more.

But the X6100 and IC-705 share enough similarities that field-portable HF enthusiasts have taken notice…Nonetheless, it’s one major difference that has really caught their attention. Continue reading A review of the Xiegu X6100 portable SDR transceiver →

Antennas, Hams, Morse Code, QRP

Bob’s new stainless key and stealthy speaker wire that snags serious QRP DX !

4 Comments

Many thanks to Bob (WD4EWZ) who writes:

Thomas,

Let there be no doubt that your speaker wire antenna is awesome! I have been licensed for 46 years but was inactive during much of that time. I finally pulled the trigger, largely on your reviews, on a new Icom IC-705, AH-705 and PowerWerx PS.

I live in a very HOA restricted area so antennas were my bane. I built your speaker wire antenna not expecting much, and for the first few days I got nada. The bands were terrible and the antenna was looped around my lanai.

On Friday I had an inspiration. I made a throw line, moved an unused bird feeder anchor post and got the antenna about 40 feet up into a tree. The wire is invisible from the street, and we have more latitude in the backyard. My wife likes it so much she wants me to just leave it there, and make another for POTA/SOTA.

Does it work? Oh my goodness… Last night I nailed 9K2BM in Kuwait on 20m SSB, and this morning the JAs were melting the face off my IC-705.

This antenna is a wonder. As is the 705, after a week of learning how to optimize the settings.

Joe, at HRO in Winter Springs warned me that the 705 had a learning curve, and I foolishly said ‘yeah, sure.’ I do this (computer science/IT/data science) for a living. Don’t worry about me.’ Wrong! A huge learning curve, but I’m getting there.

Also, my new paddles recently arrived. I love this little stainless paddle — the magnets are strong enough to hoist a car, and the price is amazing… $69 on Amazon [affiliate link]!

I am using a 4″ square steel forging plate I had from my days of making metal jewelry. (Too many hobbies). It works a treat.

Thanks so much for your writings and 73.

Bob (WD4EWZ)

Thank you for sharing this, Bob! Loads of readers have asked me about those stainless paddles, so it’s great to get a report on them. 

I also love how you’ve implemented the speaker wire antenna in such a stealthy way! And the DX you’ve snagged? Simply amazing.

Thanks again for sharing!

Field Reports, Morse Code, New Products, News, Portable, QRP, QRP Radios

Field Report: Testing the new Penntek TR-35 firmware during a POTA activation!

18 Comments

Since I have a busy family life, I always look for opportunities to fit a little field radio time into my schedule.

My policy is to always keep a radio field kit in my car or truck so I can take advantage of any last minute opportunities.

On the morning of Wednesday, April 20, 2022, I was scheduled to take my car in for warranty/recall servicing at the dealership.  I decided in advance that if the service could be completed in two hours or less, I’d relax in their waiting room with my MacBook, drink a cup or two coffee, and attempt to make a dent in my email backlog.

If the service was going to take longer than 2 hours, I decided that I’d use one of their loaner/courtesy cars and activate a nearby park.

The dealership is about 45 minutes from my QTH and I’ve activated most of the parks nearby it, save one: Holmes Educational State Forest.  I’ve been wanting to activate this park for ages, but my travels these days simply don’t take me in the direction of the park very often; it’s a good 75 minute drive from my QTH.

Uncertain how long the dealership would need my car, I grabbed my SOTA backpack that had a full field kit inside based on the Penntek TR-35 transceiver.

TR-35 Upgrades!

Why the TR-35? Because I was testing new firmware that added a huge upgrade: two CW message memories!

I won’t go into details about the new upgrade in this field report since I describe it both in my activation video (see below) and in this post which relays the announcement from WA3RNC.

Suffice it to say, I was itching to see how well the new message memories work during a proper activation.

Front of the line

Since this upgrade was just made public, I thought those of you who either own the TR-35 or are plotting to purchase the TR-35, might want to see it in action. For this reason, I pushed this video and field report ahead of all of the others in my pipeline.

The really weird part about publishing this video so quickly is that one of my next field reports and videos will actually feature the first time I took the TR-35 to the field about 3-4 weeks ago! Back then, CW message memory keying wasn’t even on the table.

Activation time

I arrived at the dealership around 9:00 AM (local) and the first thing I asked was, “So how long do you think this will take?” The representative looked at the work to be performed and said, “Three or four hours, likely. If you’re in a rush, maybe two hours.”

I decided I wasn’t in a rush because I’d much rather be playing radio at a new-to-me park than sitting in a waiting room.

I asked if I could borrow one of their courtesy cars and he replied, “We assumed you might want one Mr. Witherspoon, so we already reserved one for you.”

Woo hoo!

Holmes Educational State Forest (K-4856)

The drive to Holmes Educational State Forest from the dealership took perhaps 30 minutes or so–it was a gorgeous day and a beautiful journey. Continue reading Field Report: Testing the new Penntek TR-35 firmware during a POTA activation! →

Field Reports, Morse Code, News, POTA, QRP, SOTA

Speaker Wire SOTA & POTA: Another rendezvous with Rendezvous Mountain!

13 Comments

I get a little thrill out of checking out new parks and summits.

When going to a new-to-me site, I typically do quite a bit of research in advance. With parks, I look up directions to the entrance, hiking trails, park boundaries, and try to sort out the best potential activation sites on a map. With a summit, it can be much more complicated, but reading previous activator notes really saves a lot of headache. That’s especially the case here in the States where many summits are on private/gated land and/or could require bushwhacking off trail with no mobile phone service.

Then again, returning to a site I’ve been to before is also quite nice. I know what to expect and that often opens up the door to more confidence with time planning, antenna choices, and what to pack in terms of gear.

 

On Friday, March 25, 2022, I re-visited a site I hadn’t been to in nearly a year: Rendezvous Mountain Educational State Forest.

 

What’s great about Rendezvous is that it’s both a POTA and SOTA site.

On top of that (no pun intended) the activation zone of SOTA summit 2543 (W4C/EM-082) is on a road where Rendezvous Mountain Educational State Forest (K-4859), and Rendezvous Mountain State Game Land (K-6941) overlap. One activation yields two parks and one summit!

Last year, it took a bit of research to make this discovery. I studied both the park and game land maps, then compared those with a Cal Topo map. If interested, check out that field report here.

Rendezvous Mountain

I arrived on site around 12:45 local. The park was void of visitors–I almost felt like I’d arrived on a day when the gates should have been closed.

As I grabbed my SOTA backpack out of the back of the car, a ranger pulled up in his truck and  asked if I was planning to hike. I told him about my plans and asked if it was okay that I hike the forest service road to the summit. He said, “Sure. But when you reach the prison crew doing brush cutting on the road, make sure one of the guards sees you before you attempt to pass them.”

Okay then.

I thanked him and double checked that it was actually not a problem to hike the road and he said, “Go for it!” Continue reading Speaker Wire SOTA & POTA: Another rendezvous with Rendezvous Mountain! →

Morse Code, News, QRP Radios

The Yaesu FT-817/FT-818 and narrow filter availability

40 Comments

IMPORTANT UPDATE:

After this article was originally posted, I discovered a very easy way to assemble your own narrow CW filter. Click on this link to read a post that describes, in detail, how you too can build a replacement Collins narrow CW filter for the FT-817/818 series radios (plus other similar Yaesu models). 

What follows is the original article:

So I’m a big fan of the Yaesu FT-817/818 series radios. This general coverage QRP radio has had a longer market run than any other transceiver I can think of and for good reason.

While the 817/818 lacks some of the advanced features of more modern field rigs and have no internal tuner, it makes up for it by:

  • sporting multi-mode HF, VHF, and UHF coverage,
  • having two selectable antenna options (a front panel BNC and back panel SO-239),
  • being incredible durable/rugged,
  • featuring excellent QSK (albeit with a bit of relay clicking…which I actually like),
  • and  generally being very affordable (prices typically from $400 used to $650 new).

In addition, they tend to hold up well with time.

For the price? I feel like you get a lot of radio with the FT-817/818.

This is the reason why I often recommend the FT-817ND and FT-818ND if it sounds like a good match for the operator.

One gotcha though…

I’m starting to realize that there is one downside to this rig especially if you’re primarily a CW operator: optional narrow filter availability. Continue reading The Yaesu FT-817/FT-818 and narrow filter availability →

Field Reports, Morse Code, News, Portable, QRP, Reviews, SOTA

SOTA Field Report: How long will Pale Blue Li-Ion rechargeable batteries power the Elecraft KX1?

9 Comments

February and March 2022 were a crazy couple of months for me.

So crazy, that I wasn’t able to fit in one single POTA or SOTA activation for a nearly 4 week period. I’m not sure I’ve ever been that long without an activation since I started POTA in earnest.

Between home projects, wacky weather, timing/logistics, and even a brush with Covid, I had my hands full.

Thankfully, on Friday, March 19, 2022, the stars aligned and I was able to fit in an activation of Bakers Mountain for the Summits On The Air (SOTA) program.

It was so nice hitting the field again!

Pale Blue AA Battery Field Test

I like shaking up my activations and trying new transceiver/antenna pairings. On this particular activation, I had a special test in mind.

A few months ago–almost as an impulse purchase–I ordered a set of eight Pale Blue AA Li-Ion rechargeable batteries. I didn’t check the specifications, but I did watch this somewhat promising assessment on The Tech Prepper YouTube channel.

My hope was that these little Li-Ion cells might power my Elecraft KX1 long enough to complete a field activation.

The KX1 is a marvel of QRP engineering, in my humble opinion, and it was the first super portable transceiver I owned that could be powered by internal batteries.

When the KX1 was first introduced, Elecraft recommended using non-rechargeable Advanced Lithium AA cells from Energizer and Duracell. These batteries sported a rather flat discharge curve and could power the KX1 for quite a while. Of course, the downside is they’re single-use and expensive. Six of those cells would often set me back nearly $9 or $10. Before I started doing POTA and SOTA, I kept a set of advanced lithium cells in my KX1 for casual, impromptu QRP in the field.

Doing frequent field activations–which tend to have much more transmitting time than casual Qs–it’s just not sustainable to purchase these cells, so I tend to power the KX1 with an external battery.

I couldn’t resist the thought that I could use USB rechargeable batteries in the KX1, so I forked out $60 (mild gasp!) for a set of eight AA batteries (these are purchased in packages of 4).

The cool thing about the Pale Blue batteries is that they can be directly charged from any 5V USB power source. Each battery sports a Micro USB port and its own internal battery/charge management system.

I was well aware these batteries would not power the KX1 for hours at a time, but I was hoping they could for at least 30-45 minutes.

The only way to really find out was to do a real-life field test. A SOTA activation would be ideal! Continue reading SOTA Field Report: How long will Pale Blue Li-Ion rechargeable batteries power the Elecraft KX1? →

Field Reports, Morse Code, News, QRP

POTA Field Report: Gazebo QRV & Gusty Winds with the Elecraft KX1 and K6ARK EFHW

13 Comments

One of the things I love about our state and national parks is that no matter how often I visit, there’s almost always something new to discover.

This is especially the case as the seasons change from winter to spring.

On March 20, 2022, I carved out enough time in my afternoon to fit in a quick activation of Tuttle Educational State Forest. My main goal, in truth, was fitting in a nice hike–the weather was beautiful, although it was rather gusty.

I needed a little “radio therapy” that day as I had been spending time in the hospital with my mom who had a nasty case of pneumonia. This was a few weeks ago and she’s feeling much better now, thankfully, but those hospital weeks in March were pretty stressful for all of us.

Field activations are such an effective way for me to get in a little exercise, a little radio time, and clear my mind; again, proper “radio therapy.”

Tuttle Educational State Forest (K-4861)

For this trip, I packed the Elecraft KX1 field kit which included my K6ARK EFHW antenna since that was the last pairing I’d used int he field (click here to read that report). I did, however, transfer the KX1 to my new Pelican 1060 waterproof case.

I actually have a solid yellow Pelican 1060 case for the KX1, but after reading about Leo’s QCX-mini field kit built in a clear-topped Peli 1060, I realized how much I missed having a clear lid on the 1060. I checked Amazon and discovered that their blue one was on sale, so I grabbed one. This was a total impulse purchase, by the way.

And for the record: I’m accused of being a radio enabler on a daily basis, but in my defence I promise the enabling works both ways! I’ve bought so many things based on reader recommendations. 🙂 Continue reading POTA Field Report: Gazebo QRV & Gusty Winds with the Elecraft KX1 and K6ARK EFHW →

Hams, Morse Code, News, Portable, POTA, QRP

CW saves Leo’s POTA activation during a low battery warning!

5 Comments

Many thanks to Leo (DL2COM) who writes:

Thomas,

Today was crazy: when I woke up I thought it would be a good idea to attempt a first activation of DA-0171 in central Berlin after dropping off the kids at day care. So I grabbed my KX2 bag and jumped on my bike.

Shortly later I arrived at the park and pulled up my 40-10m EFHW and started calling CQ on SSB 40m.

It took me about 30 mins to realize that the KX2 was regulating the power down to 5W since both the internal and the external 4Ah battery I took with me were nearly dead.

I had one QSO with a German station and felt I wasn’t really heard anywhere. Then my KX2 started showing “low batt”.

It’s funny because attempting an activation isn’t really what one would call a very important thing, but I do develop quite an ambition if I have decided to get it done. So my only chance was using CW even though I am all but ready for that.

Having read your article about auto-spotting and watched many of your videos including POTA QSO style I didn’t think long and started calling CQ POTA on 20m.

OMG what followed was just amazing!

Fortunately I didn’t run into a classic pileup which would have been super overwhelming for me, but instead about every 2 minutes someone would reply to my call and in a very patient fashion – including one P2P QSO with an operator from Italy.

So all in all I completed 13 QSOs on a “low batt” warning of my KX2.

CW literally saved by butt and I am a very happy person. Without your work for the ham radio community this would not have been possible. So many thanks again.

On a different note: Last weekend (kit building seminar with the club) I had my first DX QSO. It was K3LU who picked up my call from my KX2 and a random wire 9:1 Unun antenna (L-Shape on a mast) with 28 and 17ft legs. I had to sit down and open a beer not able to do anything for about an hour but smile. Such a motivating event and I am happy he was such a great operator instantly QRSing with me and repeating his call. I am in touch with him and looking forward to receive his QSL card which will probably go in a frame.

I also finished the TR-35 and must say I am super impressed. It runs very quietly and the reduced concept is something I really appreciate. When will you take it into the field?

All the best & 73s de Leo (DL2COM)

Oh wow, Leo! I love this–thank you so much for taking the time to share your experience.

First of all, thank you for the kind comments–I’m honored to have even played a minor role in your CW activation. In truth, this is all chalked up to your determination and bravery! I’m guessing what you discovered is what I discovered during my first CW activation: not only is it not as bad as I had imagined, but it was actually fun and got the adrenaline pumping! 🙂 

I’m now happy to know that when I hit the Low Battery warning on my KX2, I still have some time left! In truth, the KX2 is so efficient, I’ve made six individual CW 5 watt activations on one charge of the internal battery without even hitting the low battery warning. 

Again, this story just makes my day. CW is such a fabulous, efficient, and magical mode! Good on you for diving in, OM!

I also think it’s brilliant that you worked Ulis (K3LU). You couldn’t have worked a better op for your first CW contact–he’s the real deal and a wonderful fellow. Not only that, but he has some amazing QSL cards!

And the TR-35? I couldn’t agree with you more. I did an activation with the TR-35 last Friday so a video and field report is forthcoming!

Thank you again, Leo! I hope others share their experience hitting CW for the first time (hint, hint!). 

Field Reports, Kits, Morse Code, New Products, News, Portable, POTA, QRP, QRP Radios, Reviews

Video: Taking the new (tr)uSDX QRP transceiver on a CW POTA activation!

13 Comments

As I mentioned in a post published three days ago, I’m now the proud owner of a (tr)uSDX QRP transceiver.

The (tr)uSDX has been a much-anticipated QRP transceiver for those of us who love playing radio in the field.

What’s not to love? It sports:

  • Up to 5 watts output power
  • CW, SSB, FM, and AM modes
  • A built-in microphone
  • Five bands: 80, 60, 40, 30, and 20 meters
  • A super compact and lightweight form factor
  • An open-source hardware and software design
  • Super low current consumption in receive
  • A super low price of roughly $89 US in kit form and $143 US factory assembled (via AliExpress, but there are numerous other group buys and retailers)

Frankly speaking, this sort of feature set in such an affordable package is truly a game-changer. Back when I was first licensed in 1997, I could have never imagined a day when a general coverage QRP transceiver could be purchased for under $150 US. The price is almost unbelievable.

My initial impressions

On Wednesday, March 30, 2022, I took the (tr)uSDX to the field to attempt a Parks On The Air (POTA) activation. I had only taken delivery of the (tr)uSDX about 15 hours beforehand and had only had it powered up for a total of 30 minutes the previous day. Most of that time, in fact, was checking the power output at various voltage settings into a dummy load. I did make one totally random SSB POTA contact shortly after hooking the radio up to my QTH antenna.

I knew that taking the (tr)uSDX to the field and making an activation video might not be the best idea having had so little time to play with the radio and get to know it in advance, but then again, I was simply too eager to see how it might perform.  That and I always believe there’s value in sharing first experiences with a radio. Continue reading Video: Taking the new (tr)uSDX QRP transceiver on a CW POTA activation! →