Tag Archives: Parks On The Air (POTA)

Field Reports, News, POTA, QRP

Pairing the Mission RGO One with the CHA LEFS at Lake Norman State Park

2 Comments

As I mentioned in a previous post, I do love rotating out radios I take to the field. Shuffling radios not only helps me remember a radio’s features and menu system, but it helps me understand any advantages one radio might have over another.

One radio I use at the QTH a lot is the Mission RGO One. I reviewed this radio for The Spectrum Monitor magazine, and later posted the review on The SWLing Post. It has been a few months since I posted a field report and video using this rig yet it’s one readers ask about all the time because this is a small production run radio.

Before heading out to Lake Norman State Park on August 9, 2021, I grabbed the Mission RGO One, the Chameleon CHA LEFS sloper, and my 15Ah Bioenno LiFePo4 battery. I knew this combo would serve me well as propagation that day was in the dumps!

Lake Norman State Park (K-2740)

Lake Norman is such an effortless park to activate. They’ve a huge picnic area, large trees (for both antenna support and shade!), and are typically not incredibly busy during the week. I love Lake Norman because they also have a very nice Lake Shore Trail I enjoy hiking post-activation.

That Monday morning, as I drove to the park, it was approaching lunch time and I did worry that some of my favorite picnic spots might be taken, but when I arrived, I was happy to see I pretty much had the place to myself!

Gear

Setting up the CHA LEFS sloper antenna takes a couple minutes longer than a standard end fed antenna only because the feed point is elevated and the radiator slopes down from the feed point. Since I typically do activations on my own (with no extra hands to help), I find that a little extra antenna prep equates to a quicker overall deployment.

My procedure for deploying the CHA LEFS

The CHA LEFS sloper

First thing I do is identify a good tree limb at least 45′ or so high and also identify an unobstructed path for the sloping radiator to travel.

Prior to hoisting the antenna, I stretch out the radiator and attach it to a tree or support (using the supplied paracord) in the direction I want the slope to follow.

I then use my arborist throw line to snag the desired tree limb and I connect the end of the throw line directly to the CHA LEFS’ feed point. Chameleon provides Paracord for hoisting the antenna, but the great thing about the arborist throw line is that it’s more than strong enough to handle this job. It saves the extra step of pulling paracord through the tree.

Next, I attach a 50′ length of coax (PL-259s on both ends) and stretch the coax out in the opposite direction of the CHA LEFS radiator. Doing this keeps the antenna from spinning and tangling the radiator and coax as it’s hoisted into the tree.

Finally, I simply pull the throw line and raise the antenna feedpoint to the desired height. Again, I like a height of at least 40-45′, but lower will still work. As I raise the antenna, I do put a little tension on the coax feedline just to keep it from swinging around the throw line or radiator.

Of course, if you have two people, one person can simply stretch the coax as you’re raising the antenna feedpoint which will also keep it from tangling.

That’s all!

In truth, the amount of extra time to deploy the CHA LEFS as opposed to, say, an end-fed half wave is maybe three minutes.

I picked the CHA LEFS for this particular activation because it’s resonant on my favorite bands, it’s efficient, and it was so effective the last time I performed an activation during poor/unstable propagation.

I picked the Mission RGO One because it has an amazingly quiet receiver and handles QRN like a champ. Plus, being a tabletop radio, it also sports a proper speaker, large controls, and up to 50 watts of output power if needed.

Although I’m a QRPer, on days with horrible propagation, I have been known to increase the power beyond 5 watts if operating SSB especially. This year, I set out to validate all of my park and summit activations with 5 watts or less, so at least my first ten contacts at a park will be QRP.

Before starting this particular activation, I took a few moments to record a video and answer a reader question.

On the Air

I thought I’d start by calling CQ on the 40 meter band in CW. Within 15 minutes, I snagged the ten contacts needed for a valid POTA activation. I was very pleased with this.

Since I had mobile phone service, I checked the POTA spots and worked AA3K (Park To Park) then moved to the phone portion of the 40 meter band.

During the exchange with AA3K, I did pump the power up to a cloud-scorching 20 watts! A proper rarity for me.

I then worked an additional five contacts in about 8 minutes in SSB. Very satisfying!

QSO Map

Here’s my QSO map of the entire activation. The red polylines represent SSB contact, the green are CW:

I was very pleased with the results especially after reading reports from other activators that same day who really struggled to get their ten.

Video

Of course, I made one of my real-time, real-life, no-edit videos of the entire activation. If you’ve never seen one of my videos before and have a strong dislike of professional, well-polished YouTube channels, you’re in for a treat! 🙂

Click here to view on YouTube.

Lake Shore Trail

Post-activation–and despite the heat and humidity–I hiked the length of the Lake Shore Trail; roughly six miles. I highly recommend this trail if you can fit it into your schedule.

Thank you!

As always, thank you for reading this report and thank you to those who are supporting the site and channel through Patreon and the Coffee Fund. While certainly not a requirement–my content is always free–I really appreciate the support.

Here’s wishing everyone a little radio fun this week!

Cheers & 73,

Thomas (K4SWL)

How To, Morse Code, News, POTA

How to send a standard POTA CW exchange

14 Comments

Many thanks to Mike (KO4RIT) who writes:

For those of us really, really new CW operators and aspiring QRPers, can you do a video (or a walk n talk) showing several POTA QSO’s in slow motion?

Love your work, thanks.
73
-mike ko4rit

Mike, your timing was impeccable.  I noticed your message on my phone as I was preparing a park activation at Lake Norman State Park on August 9, 2021.

I decided to take a few moments prior to the activation and dissect a “typical” POTA CW exchange on my notepad with the camera rolling.

As I mention in the video, there is no standard or “POTA ordained” exchange, however, once you get into CW you’ll notice that most follow a common formula. POTA, SOTA, and WWFF CW exchanges are, in fact, very formulaic.

I believe in exchanging all of the important details–callsign, signal report and sometimes a state, province, or park number–along with a  little common courtesy. You don’t want to make the exchange too long, but these aren’t contest situations either, so it’s okay to go off script a bit sometimes, too. Just remember that there are (hopefully!) others in-line waiting to work your station when you finish your exchange in progress.

Video

Note that this video is impromptu, unscripted and unedited. I’m sure I missed a few details and it’s perfectly fine, dear readers, to leave other best practices below in the comments section.

Click here to watch this video on YouTube.

Additional Resources:

Do you enjoy QRPer?

Please consider supporting us via Patreon or our Coffee Fund!
Your support makes articles like this one possible. Thank you!

Field Reports, News, Portable, POTA, QRP

POTA Field Report: A beautiful day for obnoxious QRM!

4 Comments

A few weeks ago–on July 12, 2021–I popped by Lake James State Park to do a quick activation with the Icom IC-705. It had been a while since I’d used the ‘705 in the field and the little rig was begging to go outdoors.

Here’s the funny part: I completely forgot about that activation! Two days ago, while browsing my photo archive, I noticed the video I made of the activation and, of course, the memory came flooding back.

In my defense, it has been a crazy summer and the weeks/days seem to all blend together in my head.

Thing is, this activation was memorable for a bad reason: QRM (human-made radio noise). It was also memorable for some of the folks I worked on the air.

Lake James State Park (K-2739)

I arrived at Lake James and was a bit surprised to practically have the place to myself.

I found a picnic table with a view of the water, deployed my speaker wire antenna, and set up the IC-705. As with all of my activations, I was only running 5 watts.

I attached the speaker wire antenna’s BNC binding post adapter directly to the mAT-705 Plus ATU.

Gear:

Propagation was–you guessed it–forecast as very poor.

It felt that way when I hopped on 40 meters at first as the band was pretty quiet..

Still, I managed to log 5 contacts on 40 meters (two in SSB, three in CW) before moving up to 20 meters which served me well.

I worked a total of eight stations in nine minutes on 20 meters.

QRM

Check out the noise level on the waterfall display!

If you watch the video, you’ll hear how nasty the QRM was at times.

I keep forgetting that there’s a source of intermittent radio interference at the Lake James visitors center. The spot where I set up the station was only 25 meters or so from that building. I believe the center was responsible for the QRM I first experienced during the activation. Whatever the device is generating the QRM, it doesn’t last for long periods of time–it cycles.

The second batch of QRM was emanating from a small boat that pulled up to the dock in front of my site. It was nasty and completely wiped out the 20 meter band. When the owners turned off the boat and stepped onto the dock, the noise stopped completely. Later, when they got back into the boat, the noise started again. I have to assume it was something in their motor causing the QRM. I suspect they may have been using a DC trolling motor.

Memorable contacts

POTA activations often feel like a gathering of friends. I often see many of the same callsigns in my logs and it’s a lot of fun working them each time.

Also, it’s a lot of fun to work stations further afield. At Lake James, I was very pleased to work NK7L in Washington State, IK4IDF in Italy, and HA9RE in Hungary. My back of the envelope calculations tell me that I was pushing 1,000 miles per watt when I worked Elemer (HA9RE). To be clear, all of the work was done on his end as he has some world-class ears; just check out his QRZ page!

For some reason when I logged HA9RE, I copied VA4RE. I’m not sure why, but after packing up it hit me that I had logged him incorrectly (funny how brains work!). I reviewed the video on-site and confirmed it was indeed HA9RE.

Here’s my QSO Map:

I was also very pleased to finally work Dave Benson (K1SWL). He’s very well-known in QRP circles for his amazing Small Wonder Labs kits. Dave’s a great guy and, of course, loves playing radio in the field.

Video

Here’s my real-time, real-life, unedited video of the entire activation. Apologies in advance as I really needed a wind screen over my microphone that day–I had the mic and camera a little too close.

Loop next time!

The next time I hit Lake James, I plan to deploy a Chameleon loop antenna. I think it will have a significant impact on the QRM levels at that particular part of the park. Of course, I could easily move further away from the noise source (that’s the easiest solution) but I’d like to see how effectively a loop might mitigate the QRM. That and it’s been years since I last used a compact mag loop antenna in the field.

Thank you

Again, thank you for reading this report and thank you to those who are supporting the site and channel through Patreon and the Coffee Fund. While certainly not a requirement–never feel an obligation to do so (especially if you’re investing in your first station, for example)–I really appreciate the support.

Here’s wishing you some outdoor radio fun in the near future!

Cheers & 73,

Thomas (K4SWL)

Do you enjoy QRPer.com?

Please consider supporting us via Patreon or our Coffee Fund!

Your support makes articles like this one possible. Thank you!

Field Reports, Morse Code, News, Portable, QRP

Activating Pilot Mountain State Park on a beautiful summer afternoon

3 Comments

After a successful SOTA and POTA activation at Hanging Rock State Park on Tuesday, July 13, 2021, I drove to nearby Pilot Mountain State Park. It was quite warm, but a beautiful day with no afternoon thunderstorms in sight.

I couldn’t pass up the opportunity to play a little more radio. As the French say, “Il faut en profiter!”

Although I’ve seen Pilot Mountain numerous times in my travels, I had never actually visited the park so this was a new-to-me park activation.

Pilot mountain is a landmark in the Yadkin river valley and has a fascinating back story.

Per Pilot Mountain State Park’s website:

“Pilot Mountain is a remnant of the ancient Sauratown Mountains. A quartzite monadnock, this rugged mountain rock has survived for millions of years while the elements have eroded surrounding peaks to a rolling plain.

Pilot Mountain is capped by two prominent pinnacles. Big Pinnacle, with walls of bare rock and a rounded top covered by vegetation, rises 1,400 feet above the valley floor, the knob jutting skyward more than 200 feet from its base. Big Pinnacle is connected to Little Pinnacle by a narrow saddle.

The mountain was mapped in 1751 by Joshua Fry and Peter Jefferson, father of President Thomas Jefferson. Pilot Mountain became North Carolina’s 14th state park in 1968. The Pilot Mountain Preservation and Park Committee proposed the establishment of Pilot Mountain as a state park in order to protect it and the surrounding area from commercial development. The group secured options on the land and raised matching funds that made it possible to purchase with
federal grants.”

Pilot Mountain is a SOTA summit, but it has never been activated because it would require an experienced rock climber (assuming access is even allowed). The base of Big Pinnacle is 61 meters above the summit trail system, so well outside the 25 meter activation zone.

Pilot Mountain State Park (K-2750)

I only had my sights set on making a park activation out of Pilot Mountain and, frankly, I didn’t even have time to explore the trail system  that Tuesday.

Finding a spot to set up was quite easy. I entered the park and took a right at the roundabout which lead to the parking area at the top portion of the mountain.

From there, I found a small picnic area perhaps 50 meters from the parking lot. I carried my gear there and set up shop!

Since I was doing this activation mid-afternoon, I had the picnic area to myself, save one unfortunate woman who was trying to (conspicuously, if I’m being honest) fit in a bit of meditation time.  She picked out a picnic table near one of the main trails basically in the center of the picnic site , so I assumed she was pretty good at blocking out noises you’d normally hear at a busy park.

But the question remained: could she block out the sweet sound of CW emanating from my FT-817?

There was only one way to find out!

In truth, I try to lay low at parks and not disturb other people. In this case, I picked a table on the perimeter of the picnic area but it was still only a couple tables away from her. Since I was making one of my real-time, real-life field activation videos, I would be using the speaker–instead of headphones–with the FT-817.

In other words, there was no escaping a little CW music!

I shared my picnic table with this little Praying Mantis
I think he’s upset that my throw line is all over *his* ground.

Gear:

This was also the first time I’d used my new orange single-level CW Morse paddle very kindly gifted to me by contributor/subscriber, Nathan (N8HWV).

Although it might look like a dual lever paddle, it’s actually a single lever!

Thank you so much, Nathan! 

On The Air

I started on 20 meters CW and, fortunately, it was hopping!

I worked 18 stations in 19 minutes. Whew!

Many thanks to N2EIM and NA9M for the P2P (Park To Park) contacts!

I then moved to 40 meters where I worked K8DRT for a second time (first was on 20M) and my “it wasn’t a real activation unless I worked him” buddy, K8RAT.

40 meters wasn’t in as good of shape as 20 meters was.

Having no way to spot myself to the POTA site, I didn’t attempt any SSB contacts–I would have at least for a while,  otherwise.

Video

Here’s a real-time, real-life, no-edit, no-ad video of the entire activation:

Click here to view on YouTube.

Inner Peace through code…

Evidently, Morse code must have “resonated” with my meditating neighbor.

She didn’t move until I I was off the air–as if the conclusion of her session coincided with the end of my activation.

Obviously, a little CW helped her along her journey to inner peace. 🙂

I know it did for me!

Thank you

As always, thank you for reading this field report. I hope you take a little time to achieve your inner peace by playing radio outdoors! 🙂

73,

Thomas (K4SWL)

Do you enjoy QRPer.com?

Please consider supporting us via Patreon or our Coffee Fund!

Your support makes articles like this one possible. Thank you!

Field Reports, Morse Code, News, POTA, QRP, SOTA

Field Report: Some QRP POTA and SOTA at Hanging Rock State Park!

3 Comments

I’m not a summer-heat-loving guy. Quite the opposite, in fact. Give me cold weather and I can hike and camp forever.

On Tuesday, July 13, 2021, it wasn’t cold outside, of course, but I still wanted to fit in a park activation and hike. Despite the forecast highs of 90F/32C. I had almost the entire day to play radio, too–a rarity.

When I have an entire day to devote to radio, I can either hit the road and try to hit multiple parks–perhaps as many as 5 or 6–or I can choose to venture further afield and hit a new-to-me park.

I tend to choose the latter and that Tuesday was no exception.

North and north by NW of Winston Salem, NC, are two parks I’ve always wanted to visit: Hanging Rock State Park and Pilot Mountain State Park.

I devised a plan to first visit Hanging Rock, then Pilot Mountain. Both parks are close together geographically, but a good 30 minutes drive apart.

A quick check of the SOTA database and I discovered that there are actually two summits on Hanging Rock State Park’s grounds. One is off the beaten path a bit and would require some light map work, and the other–Moore’s Knob–is on one of the park’s main trails.  Since I was putting this whole plan together morning of, I opted for the “easy” summit as I didn’t have time to double-check topo maps, parking areas, etc.

Hanging Rock State Park (K-2735)

Travel time to Hanging Rock was about 1 hour 45 minutes. Once I arrived on site, I discovered that, like many state parks, the main visitor’s center is being renovated.

I easily found the parking area for the Moore’s Knob loop. It being a Tuesday, the parking lot only had a few cars.

Pro tip: with the visitor’s center out of commission, stop by the swimming area pavilion for some proper restrooms/washrooms!

I planned to take the full trail loop in a counter-clockwise direction.

I’m glad I did, too, as the bulk of the ascent was a long series of steps. I’m not a fan of steps, but I much prefer using them heading up a mountain rather than down.

Near the summit, there’s a very short spur trail to Balanced Rock which is worth a visit not only for the rock, but also the views.

It being a North Carolina state park, there are some obligatory warning signs about how falling off of cliffs can lead to injury or death. These warning signs aren’t as prominent as those at Crowders Mountain State Park, though!

Moores Knob (W4C/EP-001)

You can see my MPAS Lite vertical poking out of my pack. I brought it along in case I had no good tree options. In this case, I didn’t use it.

There’s no mistaking the summit as there’s a large observation tower on top that affords some spectacular views of the Blue Ridge Escarpment, the foothills, and Pilot Mountain (my next stop).
There were a number of hikers on the summit of Moore’s Knob and it was actually pretty gusty up there, too. I searched and found a nice little spot to set up that was sheltered from the wind, shaded, and even had trees tall enough to hang my Packtenna 9:1 UNUN random wire antenna!


Gear:

Set up was quick and easy on the radio side of things, but as with most SOTA activations, positioning my tripod to make a video was the tricky part. Since I’m sitting on the ground, it can be difficult to find the right angle so that the radio, key, and notepad are all in the frame. (See my video below).

I started calling CQ at 16:00 UTC on 20 meters. I had a reasonable cell phone signal on the summit, so I was able to spot myself. Problem was, though, my hiking app seemed to be draining my iPhone’s battery very rapidly (that and my aging iPhone 7 probably needs a new battery at this point). After spotting myself, I shut down the phone to save power.  I forgot to contact my buddy Mike (K8RAT) with a frequency, but he eventually saw me on the SOTA spots.

In a period of 29 minutes, I worked 20 stations on 20 meters.

Next, I moved up to 17 meters where I worked eight more stations in seven minutes.

I love effortless activations like this and part of me wanted to continue operating–even switching to SSB–but looking at the time, I knew I needed to hit the trail, make my way back to the car, and drive to Pilot Mountain.

I called QRT around 16:42 UTC and packed up my gear.

QSO Map

Not bad for 5 watts and a 31′ wire!

One highlight of this activation was meeting Jim (NA4J) who heard my CW from the summit and popped by to introduce himself. Although I trimmed out our conversation in the video (I’m not entirely sure he knew I was recording the activation), you’ll hear him in the first half of the activation.

Video

Here’s my real-time, real-life video of the entire activation:

Click here to view on YouTube.

The hike back to the car was very pleasant. It was a bit longer than the path I took to the summit, but the descent had no steps which made it a breeze.

I had a radio topic on my mind during that hike and actually pulled out the OSMO Action camera and made a bit of a “hike and talk” video.  It’s on the topic of ATUs and resonant vs non-resonant antennas. I haven’t yet decided if I’ll post it–the shaky camera might make some viewers sea sick! 🙂 We’ll see–maybe I’ll brave up and post it anyway…

Next, I drove to Pilot Mountain State Park for a quick afternoon activation. Although Pilot Mountain is a SOTA summit, too, it’s yet to be activated because the actual summit would require proper rock climbing, I believe.

Thank you

As always, thank you for reading this field report! And thank you to everyone who has supported me through Patreon and the Coffee Fund. I truly appreciate it.

I hope you find time this week to take your radios outdoors to play, or to hunt some parks and summits from your shack, backyard or vacation spot!

And for those of you working on your CW skills, don’t give up and don’t stress about it. Take your time and allow your brain to absorb code by simply listening. When you feel you’re able to copy even some of the contacts in the videos of my activations, you’re ready to start hunting CW activators!

You’ve got this!

73,

Thomas (K4SWL)

Do you enjoy QRPer?

Please consider supporting us via Patreon or our Coffee Fund!

Your support makes articles like this one possible. Thank you!

Field Reports, News, Portable, POTA

What is it they say about the best-laid plans?

6 Comments

Ever have one of those days where nothing works out the way you had planned–?

Yeah, me too.

In fact–and this is purely a coincidence–today was one of those days for me!

Here’s how it played out…

A New-To-Me Park

This morning, I had an optometrist appointment in Hendersonville, NC and needed to fit in the appointment on my way to visit my parents for a couple of days. I don’t often venture out to Hendersonville so I looked up a few parks in the area and thought I might fit in a quick activation around lunch.

Keep in mind it’s been nearly two weeks since my last field activation, so this QRPer is having some serious withdrawal.

I looked at the map and realized that Green River State Game Land was a very short detour. I had meant to activate Green River last year and actually located an ideal spot for an activation via the NC WRC maps but never activated it. Since it would be awfully fun to fit in a new-to-me park en route to visit the folks, I mapped out my travels, scheduled the activation via the POTA website and notified my buddies Mike (K8RAT) and Eric (WD8RIF) so they could look for me on the air.

The optometrist appointment went well (thanks for asking) so I made my way to Green River Game Land. I had no problem finding the site–it was basically an open parking area off a rural road.

It was hot, though. My car’s thermometer measured 93F, the humidity wise high, and there were no trees to provide shade. I sat up the Chameleon MPAS Lite, a folding chair, and used the open hatchback of my Subaru as shade from the noon sun. It was *just* enough shade for my chair. I placed the Xiegu X5105 on my clipboard, connected the key, and turned on the radio.

QRM!

The first thing I heard on the radio is the last thing any activator wants to hear. Noise…lots of it.

The radio was tuned to 17 meters and the noise was approaching S9.  The noise was raspy and sounded like arching from power lines.  I looked at the road behind me where there were several power lines meeting at three different poles.

I checked 20 meters, 30 meters, 40 meters, and 60 meters. The noise was consistently loud across those bands.

I’m certain the noise was coming from a local power pole–it could have been a staple, nail, or something else that was arching.

It was so incredibly hot on site, I had no desire to attempt hiking into the game lands far enough to escape the noise. In my experience, power line/pole noise can propagate vast distances. Plus, again, it was just too hot.

Normally, I’d try to find another game land access point, but having already done a bit of research, I knew going to an alternate spot would be too much of a detour. This was the only access point along my route.

I decided, instead, to pack up my gear, continue my travels, and plot an alternate activation.

South Mountains Game Land

Photo from earlier this year.

I called my buddy Mike, and told him I thought I’d try South Mountains Game Land. In the back of my mind, I had been wanting to visit one portion of South Mountains I activated in the winter this year. I thought, perhaps, it was actually near a SOTA summit on the game lands.

I pulled over at a gas station a good 45 minutes from South Mountains and tried to log into the POTA website to change my scheduled activation (so it wouldn’t spot me at the wrong park via the Reverse Beacon Network). Problem was, before logging me in, Google wanted to initiate a two-factor authentication since I hadn’t logged into the POTA site on my phone in a while. Google wouldn’t send me a text message to confirm, it wanted me to dig a confirmation code out of my Pixel 3 phone that I only use as a video camera and the Pixel 3 was inaccessible.

I had a hunch that I wouldn’t have mobile phone access on site, so I called Mike back and he agreed to correct my spot on the POTA network. (Thanks, Mike!)

Ten minutes from the game lands entrance, I noticed dark clouds had formed to my north. I pulled over and checked my weather app while I had Internet access. Sure enough, a large line of thunderstorms had formed and were heading my way, very slowly. I decided then and there I was not going to do an activation–my phone was already giving me severe thunderstorm warnings–but I thought I might at least explore the site and see if the road would actually lead to a SOTA summit.

Three minutes from the site entrance, the heavens opened. It was a proper gulley washer of a deluge, too–the type that forces you to drive at a snail’s pace and the type that causes flash-flooding. I turned down the game land road and then the lightening started popping too.

I threw in the towel.

Although a part of me would have enjoyed taking the dirt road several miles into the game lands, these rains were the type that wash out dirt roads and I had no intention of dealing with that too. Plus, it would be my luck…right? Right.

Still…

I’m really not that bothered because I actually enjoyed the drive today (save when I hit the storms) and I also found a place in Hendersonville that makes excellent Gyros!

That and I fully intend to do an activation or two tomorrow, weather pending.

We’ll have to see how it plays out. It’s all a part of the field radio fun!

73,

Thomas (K4SWL)

Field Reports, News, POTA, QRP

New River State Park: Pairing the Discovery TX-500, Elecraft T1, and PackTenna 9:1 UNUN

4 Comments

Last month, my family went on a camping trip to New River State Park and had an amazing time.

I first discovered New River much earlier in the year when I did a multi-park and summit run.  I really liked the park and, especially, the campground, so I decided to return with the family for some proper outdoor fun and relaxation.

Of course, the benefit of camping at a state park is being able to play radio pretty much anytime while on the park grounds. For a few days, it’s like you’re living in a park activation and can actually set up an antenna and use it over the course of multiple days.

It’s such a big departure from my typically short (45-90 minute) park activations.

When we first arrived at the New River State Park campground, I deployed my PackTenna 9:1 UNUN random wire antenna.

I brought two transceivers with me: the Xeigu X5105 and the Discovery TX-500–I pretty much split my operating the time equally between the two radios.

New River State Park (K-2748)

Although I spent much more time on the air than I normally do, I didn’t make videos of each session. One reason is I wanted to operate with earphones–especially since some of my sessions were later in the evening or early in the morning. I didn’t want to disturb my neighbors at the campground.

That and, especially with the X5105, I wanted to see what it would be like to operate with earphones for extended sessions. Prior to making videos of my activations, I almost exclusively used earphones in the field. I appreciate the sound isolation earphones offer–I also find they help tremendously with weak signal work. When I make videos, however, I don’t want to go through the hassle of recording the line-out audio separately in order to use headphones, so I use an external speaker.

I decided to record my Wednesday, June 23, 2021 evening session with the Discovery TX-500.

Gear:

This session started only a few minutes prior to the end of the UTC day which meant I had to watch the clock very carefully and clear my logs at the beginning of the UTC day (20:00 EDT).

In POTA and other field activities, if your activation straddles the UTC day change, you must keep in mind that any contacts made after 0:00 UTC can only be counted on the next day’s logs. This was not a problem for me because I had logged dozens of stations earlier in the day, but if you ever start an activation close to the UTC day change, you need to make sure you log your 10 contacts for a valid activation prior to 0:00 UTC.

Auto-spotting help

Another thing complicating my sessions at New River State Park was that I chose not to schedule my activation via the POTA website prior to our trip.

If you schedule your activation via the POTA website, anytime the Reverse Beacon Network picks up your CQ calls (in CW), the POTA spots website will scrape that information and auto-spot you.  It’s an amazing convenience for those of us who operate CW.

I chose not to schedule my activation days at New River because I had also planned to operate at another nearby park during my stay and I didn’t want the system to spot me incorrectly. That, and I thought I would have mobile phone coverage to self-spot.

It turned out that–contrary to my mobile phone company’s coverage maps–I had no internet service at the park. None.

In order to get spotted, I relied on my Garmin InReach GPS/satellite device to send short text messages to my buddies Mike (K8RAT) and Eric (WD8RIF). My pre-formatted message would prompt them to check the RBN for my frequency, then spot me to the POTA site manually.

I’m incredibly grateful to have had them helping me in the background. Everyone should have a Mike and Eric as friends!

Video

I made a real-time, real-life, no-edit video of the entire activation. Note that it took a while to get spotted, so the first ten minutes are simply me talking (it’s alright to skip that bit…it won’t hurt my feelings!).

Also, here’s a QSO map of that day’s contacts. Note that this includes stations I logged later in the UTC day (i.e. the following morning/day.

Due to some unexpected conflicts, our camping trip was shorter than we would have liked. We plan to visit New River later this year and spend much more time there. It’s a beautiful park!

Thanks for reading this short field report and here’s hoping you get a chance to play radio in the field soon!

73,

Thomas (K4SWL/M0CYI)

Field Reports, Morse Code, News, Portable, POTA, QRP

943 Miles Per Watt with the Yeasu FT-817ND, Elecraft T1, and 28.5 feet of speaker wire

3 Comments

When it comes to parks, I haven’t picked up many new-to-me “uniques” lately.

In truth, though, I’ve put more effort into activating unique summits which takes more time to plan, plot, and activate. SOTA has taken a bite out of my park uniques, but I’m good with that because to me it’s less about my park/summit numbers and more about the exploration and outdoor radio time.

On Tuesday (July 6, 2021) however, I added one more unique to my 2021 park count: Mountain Island Educational State Forest (K-4858).

This park is actually a modest detour during my weekly travels, but I’ve never popped by for an activation. You see, unlike other state parks I visit, Mountain Island isn’t yet open to the public on a daily basis. On their website, they state that visits must be arranged in advance, so I reached out to them the morning of July 6 and they promptly replied, welcoming me for a visit and activation that very same day!

Off the beaten path

Since this state park isn’t yet open to the public, I didn’t see the typical brown highway signs pointing me to the park entrance, but Google Maps steered me right to the front gate where there’s a sign.

The gates were unlocked and open, so I pulled into the property and met with two of the park staff who were incredibly kind and accommodating. They were both familiar with the Parks On The Air (POTA) program which made it much easier for me to ask about spots where I could set up my station.

First, though, I wanted to know more about Mountain Island Educational State Forest so I asked ranger Laura about the history of the site.

Turns out, Mountain Island is the newest Educational State Forest in North Carolina and has been in the works for more than 20 years.

The Forest is a vast conservation area that protects 12 miles of shoreline on Mountain Island Lake in the Catawba River Basin. This lake is the primary drinking water supply area for Charlotte, Mecklenburg and Gaston Counties. She told me that one in 23 North Carolinians rely on this area for their source of water.

Much of the land was originally owned by Duke Power who put it up for sale in 1998. Conservation groups purchased the land from Duke’s real estate agency in 1998 and put it into a conservation easement. The land is actually in two counties (Gaston and Lincoln) and a portion in the city limits of Gastonia.

The NC Forest Service now manages the forest and supports the public-private partnership with the counties, municipalities, and conservation groups.

Mountain Island has been actively educating school groups and the public about the river basin and local flora/fauna for many years by appointment. Currently, a new education center is being built on the property and will soon be open to the public with regular business hours. Being so close to population centers, I imagine they’ll stay busy!

Shade

Park ranger Laura was kind enough to allow me to set up under a huge tree in front of their ranger station.

I was grateful for the shade: it was 92F (33.3C) and humid.

There were no picnic tables under the tree, but I happened to have two folding chairs in my car. I used one as a table and the other as a chair. I flipped over my GoRuck GR1 backpack to make a stable base for the Yaesu FT-817ND.

Gear list:

On The Air

I was super pleased to put the Yaesu FT-817ND back on the air. It’s been a while since I’d used it in the field because my review radios (TX-500, X5105, etc.) have taken priority.

I love the FT-817ND and believe it’s actually an exceptional transceiver for CW and SSB ops. The CW full break-in QSK is wonderful and I actually like the mechanical sound of the T/R relay switching (if you like pin diode switching, you should look the other way, though!). With the 500Hz CW filter installed, the front end is pretty bullet-proof, too!

This was the first time I had paired the FT-817ND with my 28.5 foot speaker wire antenna. The random wire antenna needs a good ATU to match impedance, so I employed the Elecraft T1 this time (soon I’ll also try the LDG Z-100A).

I had planned to do a little SSB work, but quickly realized I’d forgotten the FT-817ND microphone. A shame because this site actually has excellent mobile phone service so I could have spotted myself to the network. Next time–!

I started on 40 meters CW and worked ten stations in 21 minutes. That’s a perfect pace for me!

Next, I moved to 20 meters where I worked six more in 9 minutes.

I was incredibly pleased with how well the speaker wire antenna performed–especially on 20 meters.

From the Piedmont of North Carolina, I worked Montana, Texas, New Hampshire, and Italy with 5 watts into $4 worth of speaker wire.

I did a quick back-of-the-envelop calculation and discovered that I yielded about 943 miles per watt!

To be clear, IK4IDF did all of the heavy lifting in our contact with his 9 element Yagi, but still it’s awfully exciting to put DX in the logs with only fair propagation.

Video

Of course, I made a real-time, real-life video of the entire activation (save the set-up and take-down):

Click here to view on YouTube.

Onward and upward!

I packed up quickly because I had a SOTA activation planned that afternoon on Anderson Mountain. I’ll post a field report and video of that activation soon.

Rev 4 FT-817 Buddy Board

Also, I’m about to start soldering together G7UHN’s new Rev 4 FT-817 Buddy Board! Revision 2 worked wonderfully, but revision 4 now includes a CW memory keyer among other upgrades! (Woo hoo!)  All of the components are now in the shack–just a matter of soldering them together and programing the Arduino Nano. Andy, if you’re reading this, expect a call from me soon, OM!

Thank you!

I’d like to thank all of you for reading this field report and I’d especially like to thank those of you who contribute to QRPer.com via Patreon and our Coffee Fund. While my content will always be free and QRPer is very much a labor of love, your support helps me purchase gear and supports my radio travels. With that said, if you’re saving up for your first radio or need to invest in your own kit, I’d rather you support yourself.

My goal with QRPer is to champion field radio operations and encourage others to discover the benefits of playing radio outdoors!

Have a wonderful week!

73,

Thomas (K4SWL)

Do you enjoy QRPer.com?

Please consider supporting us via Patreon or our Coffee Fund!

Your support makes articles like this one possible. Thank you!

Antennas, Field Reports, How To, News, Portable, POTA, QRP, Videos

Field Report: Let’s build a super simple antenna on-site and activate this park!

25 Comments

Until 2016, I had never purchased a commercial field antenna; I built all the ones I had ever used.

These days, I take a number of commercial antennas to the field and use them in my real-time videos and I really enjoy deploying and using them. My buddy Eric (WD8RIF) reminded me, though, that I hadn’t actually used a homebrew antenna in ages. He was right!

You see, while I believe commercial field antennas can be incredibly durable and compact, it’s important to note that antennas are one of the easiest components of an amateur radio system to build yourself. They require only the most simple of tools and are very affordable. And the best part? They can perform as well as those that are available commercially.

I also get a great deal of pleasure out of building things.

A simple goal

I’ve mentioned in previous posts that I often set a little goal that runs in the back of my mind for each park or summit activation I make.

On Monday, June 14, 2021, I made a simple goal: buy my antenna wire en route to Lake James State Park, build the antenna on site, and complete a valid Parks On The Air (POTA) activation.

A very simple antenna

I also decided to employ my Xiegu X5105 since 1.) it’s one of the most affordable general coverage QRP transceivers I own and 2.) it has a built-in antenna tuner (ATU).

One of the cool things about having an ATU is that, if it has the matching range, you can allow it to do the “heavy lifting” in terms of matching impedance.

Although I’d never put the X5105 to the test, I suspected its internal ATU would have the matching range to forgo building a 4:1 or 9:1 transformer and simply pair it directly with a random wire.

All I would need was a 28.5 foot length of wire for a radiator, at least a 17 foot length for a counterpoise, and a BNC to binding post adapter.

The antenna would benefit from multiple 17′ counterpoises, but I really wanted to keep this setup dead simple to prove that anyone can build an effective field antenna with a very minimum amount of components.

Even though I have plenty of wire lying around the house to build this simple antenna, I wanted to pretend I had none to prove that any wire would work.

And to add just a wee bit more challenge, I also limited myself to shopping for antenna wire between my home and the park without making a serious detour from my route. That really limited my options because there isn’t much in terms of commercial areas between me and Lake James State Park.

The wire

As I left the QTH, I decided that the best spot to shop was a Walmart in Marion, NC. It would only be a four minute round-trip detour at most.  I had a hunch that Walmart would even have speaker wire which would be ideal for this application.

In my head, I imagined I would have at least three or four choices in speaker wire (various gauges and lengths), but turns out I had a difficult time finding some at Walmart. We live in such a Bluetooth world, I suppose there isn’t much demand for it these days. A store associate helped me find the only speaker wire they had which was basically a 100 foot roll of the “premium” stuff for $17 US.

While I would like to have paid a fraction of that, in the end it’s not a bad price because once you separate the two conductors, you have double the amount of wire: 200 feet.

Although the frugal guy in me cringed, I bit the bullet and purchased their speaker wire. To be clear, though, I could have found another source of wire in that Walmart, but I preferred speaker wire for this application. And $17 to (hopefully!) prove a point? That’s a deal! 🙂

Lake James State Park (K-2739)

Once I arrived on site, I found a picnic site I’d used before with some tall trees around it.

Here’s how I prepared the antenna:

First, I cut 28.5 feet of the speaker wire from the roll and split the paired wires so that I’d have two full 28.5 foot lengths.

Next, I stripped the ends of the wire and attached banana jacks I found in my junk drawer. Although these aren’t necessary as the binding post adapter can pair directly with the wire, I though it might make for a cleaner install. In the end, though, I wasn’t pleased with the connection to the radiator, so dispensed with one of the banana jacks on site, and later dispensed with the other one as well. The connection is actually stronger without the banana jacks.

I then deployed the 28.5 radiator with my arborist throw line, and laid the other 28.5 half on the ground (the ground of this antenna would pair with the black binding post, the radiator with the red post).  I only needed 17 feet of counterpoise, but once it couples with the ground, I don’t think any extra length makes a difference (although less than 17 feet likely would).

The antenna was essentially set up as a vertical random wire with one counterpoise.

I then plugged the BNC binding post adapter into the rig, hit the ATU button, and was on the air.

It’s that simple!

My new speaker wire antenna in all its glory.

Gear:

On The Air

I’ll admit: I was a bit nervous putting this antenna on the air. Although I felt the X5105 ATU *should* match this antenna, I had no idea if it actually would.

Fortunately? It did.

At this point, if you don’t want any spoilers, I suggest you watch my real-time, real-life, no-edit, no-ad, video of the entire activation (including buying and building the antenna!).

Click here to watch the video.

Otherwise, scroll for my activation summary…

I was very pleased that the X5105 found a match on the 40 meter band.

I started calling CQ in CW and validated my activation by logging 10 stations in 13 minutes.

Honestly: it doesn’t get much better than this.

I logged three more stations on 40 meters CW, then moved up to the 30 meter band where the X5105 easily found a match.

I worked one station on 30 meters before heading back down to the 40 meter band to do a little SSB. I logged three SSB stations in five minutes.

Mission accomplished!

In the end, I logged a total of 17 stations including a P2P with K4NYM.

Not bad at all for speaker wire!

After the activation, I tested the X5105 ATU by trying to find matches on other bands–I was able to find great matches from 60 meters to 6 meters. Most impressive!

X5105 battery

You might recall that I attempted to deplete my X5105 internal battery at my last (rather long) activation of Lake Norman State Park.  I wasn’t able to deplete the battery at that activation, but I finally did at this one.

All I can say is that I’m incredibly impressed with the X5105 internal battery.  This was my fourth activation from one initial charge on May 16.  The battery lasted for 20 minutes, taking me well beyond the 10 contacts needed to validate this park. I’ll now consider taking the X5105 on a multiple SOTA summit run!

Short Hike

Even thought the heat was intense and the humidity even more intense, I decided to take in a 2 mile hike post-activation. I snapped a few shots along the way.

This is the Christmas Fern which derives its name from a few characteristics: its resilience to early season snows maintaining a dark green color beyond Christmas, and because folks believe its leaves are shaped like Santa’s boots or even Santa on his sleigh.

Improvements

I’ll plan to add more counterpoises to the speaker wire antenna as I know this will only help efficiency.

In addition, I’ll plan to build even more antennas with this roll of speaker wire. If you have some suggestions, feel free to comment!

Thank you for reading this field report!

Cheers,

Thomas (K4SWL)

Do you enjoy QRPer.com?

Please consider supporting us via Patreon or our Coffee Fund!

Your support makes articles like this one possible. Thank you!

Field Reports, News, Portable, POTA, QRP

POTA Field Report: Attempting to deplete the Xiegu X5105 internal battery at Lake Norman

7 Comments

Each time I head to a park or summit, I have a goal in mind.

With summits, it’s getting to the summit and activating it because, sometimes, that can be a challenge in and of itself. I’m not exactly Sir Edmund Hillary, so I’m happy when I make it to the top of any summit!

Parks, however, offer me the chance to experiment with transceiver/antenna combos, test gear, and explore hikes. Parks tend to be more accessible and spacious than summits and even have shelter options if weather is questionable.

I don’t even attempt afternoon summit activations if they require a decent hike and there’s a good chance of pop-up thunder storms.

On Monday, June 7, 2021, it was hot and incredibly humid in the Piedmont of North Carolina. That early afternoon, little patches of showers were passing through the region delivering brief, isolated downpours.

The weather forecast also predicted a high likelihood of thunderstorms that afternoon. (Turns out, they were correct.)

Those were not conditions for a SOTA activation, rather, I decided to pick out a park I knew could offer up some shelter options. Lake Norman was an obvious choice–there’s a very nice covered area at their visitor’s center and also two large picnic shelters at the other side of the park. Lake Norman it was!

Goal

I drove to Lake Norman State Park with one goal in mind: deplete the Xiegu X5105 internal battery. I had assumed the battery would only power the X5105 for perhaps two activations on one charge.

Boy, was I wrong.

I charged the X5105 before this activation on May 17, then I completed this short activation on May 18. I never expected the battery to keep going, but it did.

Now three full weeks later, I decided I would deplete the battery at Lake Norman because that afternoon I had a decent amount of time to play radio in the field. In my head, I was prepared to squeeze perhaps 30-45 minutes more air time out of that one May 16 battery charge.

Lake Norman (K-2740)

I arrived at Lake Norman State Park and scouted out a site. Fortunately–it being a Monday in the early afternoon–it wasn’t busy and all three shelters were available.

I chose to set up at a shelter at the far end of the main picnic area.

Gear:

The humidity was so thick that day,  I was sweating just walking around the site. I noticed in my activation video (see below), I was breathing as hard as I would hiking to a summit even though I was just tooling around the picnic shelter.

I had no doubt in my mind that if a thunderstorm developed, it would be a doozie! (I was right about that, too–keep reading.)

On The Air

I paired the Xiegu X5105 with my Chameleon MPAS 2.0 mainly because I wanted to see how easily the X5105 ATU could match this multi-band vertical. Turns out? Quite easily.

I expected the X5105’s battery to deplete to the point that I would need to use an external power source to complete the activation, so I connected my QRP Ranger battery pack, but didn’t turn it on. I knew that when the radio died, I could flip the QRP Ranger’s power switch and perhaps only lose a few seconds of air time.

I hopped on the air and started calling CQ. I planned to operate the X5105 until the internal battery died, then (if needed) continue operating with the QRP Ranger until I logged my 10 contacts for a valid activation. Post activation, I planned to hike one of the Lake Norman loop trails.

Normally, I would mention the number of contacts I made perhaps noting the bands that were most productive. Instead, if you’d like to experience this activation with me, you might consider watching the activation video.

Video

Here’s my real-time, real-life, no edit video of the entire activation including my full set up.  My summary of the activation follows–keep scrolling if you’re open to a spoiler.

Please note that this is the longest video I’ve ever published, so don’t feel any pressure to watch it in its entiretity:

Impressed

Let’s just say that the X5105 sold me.

The activation was incredibly fun and I logged 20 stations (18 CW and 2 phone) from Alaska to Spain with my 5 watts and the MPAS 2.0 vertical.  Propagation conditions were only “meh” but since I had the time to play radio longer, I was able to take advantages of little openings as they happened.

X5105 Battery

The X5105 won.

I simply gave up on trying to deplete the internal battery because I was running out of time to fit the activation and a much needed hike that afternoon before thunderstorms moved in.

I operated over 90 minutes with constant CQ calls and the battery never made it below 10.2 volts.

A most welcome surprise.

No mic, no problem!

During the activation, I remembered that I had been asked by readers and viewers to include more SSB work.

Problem was, I left my X5105 mic at the QTH (nearly 2 hours away by car).

I remembered though that, like the Elecraft KX2, the X5105 has a built-in microphone.

I decided to give that mic a trial by fire and, by golly, it worked!

Not only did it work, but it worked well.

The X5105? A keeper.

It was at Lake Norman that day, I decided the X5105 was a keeper.

That evening, I reached out to Radioddity–who lent this X5105 to me–and offered to pay full retail price for it either in cash or via ad credit

Since Radioddity is a sponsor on my other radio site–the SWLing Post–we decided that, since their ad was coming up for renewal soon, I would simply extend their ad time an equivalent amount of months as the full value of the X5105 ($550 US). This saved them from having to cut a check in two months.  Worked for both of us.

I have much, much more to say about the X5105 and will do so in an upcoming review.

In short, though? It’s not a perfect radio by any means, but I feel like it really hits a sweet spot for the QRP field operator.

I enjoy putting it on the air and it’s an incredibly capable little transceiver.

I’m very pleased to now put it in rotation with my other field radios. Look for it in future reports!

QSO Map

Here’s the QSO Map for this activation (click to enlarge):

Hike and dodgy weather

After packing up my gear, I walked over to a nearby trailhead and checked out the trail map. I was prepared to take a very long hike that afternoon despite the heat and humidity, but I also knew conditions were ripe for a thunderstorm.

I decided to take what appeared to be a fairly short loop trail along the lake. Looking at the map, I assumed the trail might be 1 mile or so long.

The hike is well-worn and well-marked, so there’s no getting lost here. That’s one of the reasons I didn’t bother looking at my GPS map or even consulting the trailhead map in detail.

Instead, I simply started hiking the Lake Shore Trail loop. It was gorgeous. Here are a few photos (click to enlarge):

The skies started getting dark, though, and I heard a little distant thunder.

I decided it might make sense to consult my phone for the weather map.

A line of thunderstorms had developed and they were sweeping toward me. Time to pick up the pace of hiking!

It was at this point I realized I had underestimated the length of this loop trail. Part of me was quite pleased that it was longer than I anticipated, but the part of me that didn’t want to be caught out in a t-storm wanted to get back to the car ASAP.

I checked another weather map a few minutes later.

I decided that jogging the rest of the trail made sense!

Turns out the 1 mile loop was something closer to 3 miles when I included the walk back to the car.

I did make it back to the car in time, though, right before the heavens opened.

It’s no exaggeration to say that I was sincerely concerned about the possibility of tornadoes in that storm front.

The skies were dark enough that streetlights turned on and the rain was incredibly heavy with strong wind gusts. I saw flash flooding and driving conditions were nearly impossible. I parked next to a brick building in the town of Catawba and waited for the strongest part of the storm to pass. I was also very grateful I wasn’t still on the trail by the lake!

Of course, the storm passed and I expected conditions to be a little drier behind that front, but I was wrong. I think the humidity level increased to 150%. Ha ha! No worries, though, as I was on my way to air conditioned space!

Thanks so much for reading this field report and stay safe out there!

73,

Thomas (K4SWL)

Do you enjoy QRPer.com?

Please consider supporting us via Patreon or our Coffee Fund!

Your support makes articles like this one possible. Thank you!