Tag Archives: Icom IC-705

Antennas, Field Reports, Guest Posts, Portable, POTA, QRP, SOTA

Quick test of my new SOTAbeams Band Hopper III antenna at a POTA/SOTA location

7 Comments

by Thomas (DM1TBE)

Since I have seen the Band Hopper III antenna at the website of SOTAbeams, I have been thinking about it. Most of the time I have used end-fed half-wave (EFHW) antennas when operating portable – vertical attached to a fiberglass mast or in a sloper configuration with a tree.  Those EFHW antennas seemed to cause way less troubles than a dipole with its centerpiece and coax at the thin end of the fiberglass mast.  However, there was this “other” dipole from SOTAbeams. So I thought I could give it a try and ordered it.

Two days later -including customs procedure- the antenna arrived. The antenna is a linked dipole for the 20-, 30- and 40-meter band and weights less than 500 g / 18 oz. That includes the coax and guying material. I already had the Tactical Mini ultra, a 6 m / 19.6 ft fiberglass mast that is a perfect fit for the Band Hopper antenna.

The weather was fine, my manager at work was on vacation, so there was no reason for not leaving the home office early and go for a quick activation. I went to the SOTA location for Kaltes Feld (DM/BW-659), which is also POTA (DA-0410). I have been there a couple of times this year, but offering chaser points for both programs promised more QSOs, especially when conditions are difficult. The other advantage of this place is that you can drink cold beer if the antenna fails to work. 😉

You may, or more likely may not, remember this image from an activation report in March this year.

The place looks much more inviting now with kids playing, people enjoying barbecue and a cold beer, and operating a radio is much more pleasant.

Although I have been here a couple of times, I have never visited the ruins of Castle Granegg, just a mile away. While the SOTA activation zone is surrounded by trees, the walk to the castle satisfies with a nice viewpoint on the way. Continue reading Quick test of my new SOTAbeams Band Hopper III antenna at a POTA/SOTA location →

Field Reports, Guest Posts, Portable, POTA, QRP, SOTA

My One Day Mini-DXpedition to Switzerland

8 Comments
View from the Swiss Radegg castle over the valley towards Germany

My wife and kids were with her parents for some days, the weather forecast 25° C / 77° F and the following Monday was a public holiday in Germany – perfect condition for an activation day trip during the weekend. With France and the Czech Republic already visited this year, there were two other neighbor countries waiting to be visited: Switzerland and Austria (the one without kangaroos).  Austria is on my schedule for the Ham Radio fair in Friedrichshafen, so it became Switzerland.

The area northwest of the Swiss town Schaffhausen was perfect.

The region has been inhabited for more than 10,000 years.  Schaffhausen started as an independent city-state around 1000 AD and became a Canton later. A canton is a type of administrative division similar to a state, but in European dimensions. The Swiss Confederation, as a whole, is smaller in size compared to West Virginia and has a slightly smaller population than New Jersey. Anyways, in 1330, the town lost all its lands and its independence, but regained its independence back in 1418. Schaffhausen joined the Swiss Confederation as the twelfth member in 1501. In 1944, Schaffhausen experienced a bombing raid by aircrafts from the US Air Forces, which misidentified the town in the neutral Switzerland as their target Ludwigshafen in Nazi-Germany.

The region is not too far from my home, it has a SOTA summit, which is in a POTA and WWFF area, is history-rich and has a second, although German, SOTA summit not too far away.

OpenTopoMap, OpenStreetMap CC-BY-SA, STRM

I started early on that Sunday morning at 8 a.m. The autobahn was nearly empty and just like an invitation to drive a bit faster. Since Corona, I haven’t been using my car very often, so I still had winter tires on, which are limited to 160 kmh / 100 mph.

Since 2008, Switzerland is in the European Schengen Area, so there are no regular border checks. Even before, it was a so-called “Green Border”, i.e. you could often pass it without checks. Without this old, unused border station, you would barely notice that you have crossed the line.

Some minutes later I approached the area, where the first summit is located.

The Wannenberg / Wannebärg (HB/SH-002) is a wooded mountain with an elevation of 661 m / 2168 ft. The peak is rather flat and also wooded. The way from the parking place at the foot of the mountain to the top is rather short and easy, with 2.1 km / 1.3 mi and an ascent of 140 m / 460 ft. Continue reading My One Day Mini-DXpedition to Switzerland →

Field Reports, Guest Posts, Portable, QRP

Park and Castle activation at the medieval Helfenstein castle

7 Comments

by Thomas (DM1TBE)

The last weekend was too rainy to operate outdoors. So I welcomed the public holiday on Thursday, which allowed me to take a day off on Friday and have four days off. We call such days “Bridge Day” in Germany, they “bridge” a public holiday to the weekend.

Some time ago, I have suggested a new protected area to the WWFF, the World Wide Flora and Fauna program. The nature reserve Eybtal covers an area of over 1331 hectares / 3300 acres and is the largest nature reserve in the Stuttgart administrative district. The nature reserve is on the edge of the Swabian Alb, and the ruins of the medieval castle Helfenstein are well within the WWFF activation zone.

The Helfenstein Castle is a historic fortress can be traced back to around 1100 AD when it was constructed as a strategic stronghold to protect the surrounding territories.

Coat of Arms

During the 13th and 14th century it was the seat of the Earls of Helfenstein. After a lost battle in 1372 things went south and in 1396 the family of Helfenstein had to sell a large part of its territory, including its family seat.

The new owners expanded the castle into a formidable fortress. They extended the castle walls to include a fortified tower and a second ring of walls.

Around the year 1400, a tower was built on the nearby rock. It served as a lookout and was intended to prevent the castle from being cannon-fired from that location.

During the Second Margrave War in the 16th century, Helfenstein Castle was besieged and heavily damaged. It was subsequently abandoned and fell into ruins.  In the 19th century, there was a renewed interest in medieval architecture, and efforts were made to preserve and restore Helfenstein Castle. The ruins were partially reconstructed, and today, visitors can explore the restored sections. Continue reading Park and Castle activation at the medieval Helfenstein castle →

News, QRP Radios, Surveys

Survey #2 Results: If you could only have one QRP radio for all of your ham radio activities, which one would it be?

20 Comments

This past weekend, I posted the second of several surveys on QRPer.com asking:

“If you could only have one QRP radio for all of your ham radio activities, which one would it be?”

The responses started flowing in immediately and, once again, within the first day we had already accumulated over 400 votes.

I turned off the survey at 8:00 EDT on Tuesday, May 16, 2023, with a total of 618 responses. Due to my travel schedule this week, I didn’t leave the survey open for responses as long as I did for Survey #1.

Survey Results

Here’s a pie chart showing the top 14 results in the survey. To see detail, you will need to click on the image below (or click this link) to enlarge it in a new window:

The top choice was the Icom IC-705 which accounted for 28.8% of the 618 votes.

I’m not at all surprised the IC-705 was the most popular choice.

This survey focused on the one single QRP radio you’d pick to accommodate all of your ham radio activities, modes, etc. Frankly? The IC-705 does it all: HF/VHF/UHF multimode operation, DV voice (D-Star), built-in GPS, wireless connectivity for digital modes, built-in sound card, built-in Bluetooth and WiFi hotspot, built-in recording, broadcast band reception, high-performance receiver, color spectrum display and waterfall, and so much more. Heck, you can even charge its battery pack with a common Micro USB charger.  Read my review if you want a more comprehensive view of the IC-705.

The only real con anyone mentioned was a lack of an ATU which, frankly, is something that’s so easy to remedy with an external ATU or by using resonant antennas.

Your second choice was the Elecraft KX2 which accounted for 20.1% of the votes.

The KX2 is such a versatile portable HF transceiver that it was the most popular choice in our first QRP radio survey. No doubt, those who chose the KX2 love playing radio in the field as their primary activity because it’s such an adept and versatile radio to take outdoors.

Your third choice was the Elecraft KX3 with 18.7% of the votes.

I actually thought the KX3 would take second place since it’s one of the highest-performance HF radios on the market and covers 160-6 meters with a 2 meter option. It’s an HF Swiss Army Knife of a radio.

In fact, during the first day of voting, the KX3 held the number two spot with as much as a 2% lead over the KX2, but as more votes rolled in, that lead narrowed and the KX2 displaced the KX3 for runner-up.

Your fourth choice was the Yaesu FT-817/818 which accounted for 10.5% of the votes.

Again, I’m not surprised the FT-817/818 ranked high among survey respondents. As I mention in a recent article, the FT-817/818 is an amazingly versatile, durable, and capable QRP radio.

It’s also the most affordable among these top contenders!

Like the IC-705, the FT-817/818 has multimode capabilities from 160-6 meters, VHF, and UHF.  It also sports both SO-239 and BNC antenna ports which makes it very unique among QRP radios!

The lab599 Discovery TX-500 took fifth place with 3.9% of the votes among this set of distinguished radios.

Those who chose the TX-500 appreciate it for its 160-6 meter coverage, its unique form-factor and weight, overall performance, weather-proofing, and superb RX/TX current numbers for battery conservation. For those who like to play radio outdoors (sometimes in the rain) for hours at a time with a modest battery? Yeah, the TX-500 is made for that stuff!

Full Results…

If you would like to see the actual number of votes for each of the 48 radios in this survey, click the link below to load the rest of the page: Continue reading Survey #2 Results: If you could only have one QRP radio for all of your ham radio activities, which one would it be? →

Field Reports, Guest Posts, News, Portable, POTA, QRP, QRP Radios, SOTA

A Triple activation and why I switched from a KX3 to Icom’s IC-705

25 Comments

by Thomas (DM1TBE)

Intro

The last weekend was pretty nice and just like an invitation to operate outdoors. As I wrote in one of my previous posts, I often activate summits on the Swabian Alp, a high plateau, which falls with steep cliff-like edges and many SOTA summits to the northwest. If you approach it from the foothills where I live, the sharp edge is clearly visible.

On the way to the ascent, you came along old, picturesque villages. If you look closely, you can see the “Maibaum”.

The tradition of erecting a “Maibaum” (Maypole) is a long-standing custom in Germany, particularly in the southern regions. The Maibaum is a tall wooden pole that is decorated with colorful ribbons, wreaths, and symbols of the local community. It is usually erected on May Day or the night before and is a symbol of spring, fertility, and community spirit. In some regions, it is also accompanied by folk dances, music, and festivities.

It was my third activation of the summit Römerstein, and every time I used another transceiver.

My transceiver history

When I started with ham radio, I used an old Icom IC-706.

The lack of modern features such as DSP and filters, and the current consumption made it not the first choice for portable operators. I soon switched to an Icom IC-7300 at home and got used to a waterfall and spectrum display.  After two activations with the 706 I bought a Xiegu G90.

During the time of my first activation of the Römerstein, I operated only in SSB. So, I was happy with the G90. The display was small, but way better than my old 706. I was satisfied and used the G90 until I started with CW. In CW, I prefer using headphones until today. The sound of the G90 was uncomfortable for me. The lowest volume was too loud, a lot of loud cracks annoyed me, and I was never happy with the filters. Continue reading A Triple activation and why I switched from a KX3 to Icom’s IC-705 →

Field Reports, Morse Code, News, Portable, POTA, QRP, Videos

QRP POTA from 10 to 20 Meters with the Chameleon Tactical Delta Loop and Icom IC-705

5 Comments

I do my best to shake up each field activation I perform. Even if in some small way.

While it would be way more efficient to deploy the same radio and antenna combination at each park and summit I visit, I get a thrill out of trying different radio and antenna combinations.

I should add that I’m fully aware how fortunate I am to have a lot of radios and even more antennas to pair in various combinations. I keep reminding myself that building and buying radios and antennas is still cheaper than restoring a 1940s era Willys CJ-2A.

Recently, a reader reached out and asked my opinion about the Chameleon Tactical Delta Loop (CHA TDL) antenna. I think the TDL is a brilliant antenna system, actually, and the one I recommend the most from Chameleon because of its versatility.

Not only can it be deployed as a multi-band vertical delta loop but it has all of the parts needed to be an MPAS Lite vertical as well, save the counterpoise.

The CHA TDL comes with a 25 foot wire that connects the two 17′ whips into a loop configuration, but the clamps on the end of that wire can’t connect to the ground lug on the MPAS ground spike terminal as-is. That said, you could easily make a short connector cable or connection point that would allow the CHA TDL wire to clamp to the ground spike terminal. Else, of course, you could cut a dedicated 25′ counterpoise from pretty much any wire you might have around the shack.

You can buy the same counterpoise used with the MPAS Lite package, but it’s more affordable just to build your own since there’s no magic in the counterpoise. And, FYI, configured as the delta loop, there’s no need for a separate counterpoise; only if you configure it as a vertical.

This same reader also has an Icom IC-705 and an mAT-705 Plus antenna tuner. He was curious how well that combo might work with the CHA TDL. I knew that the combo would work well, but I thought, “why not try it?”

I realized that it has been ages since I last deployed the CHA TDL in the field.

Zebulon B. Vance Birthplace (K-6856)

Tuesday, February 28, 2023, was a gorgeous day weather-wise, although it was a bit gusty at times.

I arrived at K-6856 and decided to film the full set-up of the CHA-TDL.

For an antenna with a fairly large profile when deployed, it’s actually very compact, albeit a bit heavy (mainly due to the weight of the solid stainless ground spike and TDL hub). That said, I did take this same CHA TDL setup on an 11 mile round-trip SOTA hike once and didn’t find it too heavy.

I placed my Icom IC-705 on the table in the picnic shelter and connected the mAT-705 to it with a 2′ BNC-BCN RG-316 cable and the ATU control cable. Continue reading QRP POTA from 10 to 20 Meters with the Chameleon Tactical Delta Loop and Icom IC-705 →

News, QRP Radios

Jens shares current, voltage, and power comparisons between the IC-705 and FT-818

9 Comments

Many thanks to Jens (DJ2GMS) who recently reached out to share results from some very simple tests he performed on the Icom IC-705 and Yaesu FT-818. Jens writes: 

A comparison of the Yaesu FT-818 and the Icom IC-705 (no comments, just facts):

On ext. 10,1V the FT-818 only needs 32 mA more than the IC-705

IC-705 (342 mA):

FT-818 (374 mA):

Min ext. voltage for TX of the IC-705 is 10,1V (appr. 1,8 Watts)

With 10,1V the FT-818 delivers 5 Watts

Minimum ext. voltage for TX of the FT-818 is 8V (appr. 3,5 Watts)

Thanks for sharing this, Jens!

Field Reports, Guest Posts, News, Portable, POTA, QRP

POTA in Poland: Damian activates five parks in five hours

17 Comments

Many thanks to Damian (SP9LEE) who shares the following field report:

Field Report: 5 Parks in 5 Hours

by Damian (SP9LEE)

Okay, to be totally frank with you and as not to lose your trust, I have to admit that the title, however technically 100% true, may be slightly misleading. If you’re wondering to what extent, I suggest you keep reading 😉

I live in Krakow, the second-biggest city in Poland, and I’ve always complained about not having enough green areas there. But starting my QRP outdoor adventure and joining the POTA program helped me realize that I couldn’t be more wrong. I live in the city center (20 minutes walking distance from the Main Square) and as it turns out, there are 11 POTA parks within a 20-minute drive (outside rush hours, of course), and around 30 if you decide to drive 40 minutes.

That’s just crazy, especially compared to the places where some POTA Brave Souls live, giving Thomas (K4SWL) as an example – a few dozen activated parks, but only a couple of them in close range. Mine I could reach by foot or bike! I don’t like to waste anything (not only tangible goods, but also opportunities or this great potential that a lot of nearby POTA parks give), so I rolled up my sleeves and started activating one by one in May 2022.

But when December 31 comes, it tends to provoke reflections of the happenings in the last year. This happened to me as well. I asked myself: “Hey, isn’t it also a waste if you have a few parks clustered and never try to do them all in one day?” As you read this, you already know what the answer was. I decided not to hesitate and do it as soon as possible, on January 2nd, 2023.

Since I’ve never tried to do more than one activation per day, I felt quite insecure. What I do like during an activation is to practice quick antenna deployments (this may be useful one day), then experiment with different antenna configurations (such as sloper angles, heights, azimuths, counterpoise placement), and finally make as many contacts as possible during a given time limit. This time limit is usually set by my family schedule or other errands I need to run.

As you can see, that’s the complete opposite to the requirements that RaDAR or POTA Rover awards make: proficient antenna deployment, gathering 10+ QSOs for a valid activation, collecting the equipment, and speedy drive to a next spot. Sounds challenging? But isn’t it what the New Year usually brings? It’s just a matter of making proper adjustments in one’s procedures and attitude. At least, that’s what I thought.

I picked three park entities 20-25 minute car drive from my home, which in total would give me 5 POTA references:

  • SP-0997 Kowadza Protected Area (3-fer)
  • SP-0994 Skołczanka Nature Reserve (3-fer)
  • SP-2274 Skawiński Obszar Łąkowy Natura 2000 (2-fer)

They are all located on the territory of Bielańsko-Tyniecki Lanscape Park (SP-0993) and/or  Dębnicko-Tyniecki Obszar Łąkowy Natura 2000 (SP-2122). So now you know why the title might be a bit misleading – I actually planned to take advantage of having 2- and 3-fers around and work 5 entities in total from only 3 different spots.

Kowadza Protected Area (SP-0997)

I hopped into the car just after I left home (yes, some of us have work or school duties… and some of us have a day-off to play radio!). I’ve never been to the Kowadza Protected Area, so even after researching it on Google Maps, I wasn’t sure what to expect. Besides my standard set, I also packed my fiberglass 6m fishing rod in case there was no convenient place to mount the antenna, and my portable PV panels in case the LiPo 5Ah battery died. Continue reading POTA in Poland: Damian activates five parks in five hours →

FT8, News, POTA, QRP

Guest Post: QRP POTA Activation During the CQ World Wide Contest

12 Comments

QRP POTA Activation During the CQ World Wide Contest

by Joshua (KO4AWH)

I had an opportunity to activate Fort Yargo State Park (K-2177) during the CQ WW DX contest.

Fort Yargo is my local park, about 30 minutes away. The park features a great playground for the kids to play on and many tall trees which are perfect for deploying a wire antenna. There really is not much more I could ask for in a POTA location. Even the noise floor is very low, about S0, so I typically turn on the pre-amp which brings it up to S2-S3 on my Discovery TX-500.

This was very much a last minute plan. I knew the contest was going on which may present some difficulty activating QRP. I knew I would not be calling CQ on 20m where I normally activate and hunting stations could be difficult but likely doable.

There was a bit of rain at the house in the morning, then a promise of drizzle the rest of the day. Not too sure what I would find at the park, but hopefully the rain would hold off and I could get the activation in using the TX-500 without too much worry about it getting wet. I threw in a picnic blanket with a water barrier that promised a bit of protection from the rain if needed it.

I have a go-box setup with my TX-500 and IC-705, as well as several antennas, an ATU, and all cabling and power needed to run FT8 either on my Raspberry PI4 with the TX-500, or on my iPad through the IC-705.

I was taking my wife’s vehicle as she had the car seats needed for the 3 kiddos that were coming along. So, I had to be sure I had everything I needed. There are quite a few additional radio items I keep in the back of my car that I would not have available. But everything should be in the go-box, right?

Go-Box with two full stations, TX-500 and IC-705

After a bit of mist and some rain on the drive over, I planned to setup the TX-500 knowing it would get a bit wet. I tossed the throw line in the tree and pulled up my Tufteln EFHW QRP cut for 20m. In retrospect I probably should have pulled up the EFRW for a bit more band agility.

I tuned around for a few minutes.

Yup, there was not a single free place across 20 meters where I could start calling CQ in the clear. In fact, the stations I listened to for more than a few seconds had someone else start calling right on top of them. 20 meters was indeed crazy.

I could try to hunt some DX with my QRP signal, it would be a fight no doubt, and a nice challenge. After another DX station I tuned to had someone in the States start calling right over top of them, decided not to hunt. Continue reading Guest Post: QRP POTA Activation During the CQ World Wide Contest →

Accessories, FT8, How To, News, QRP

How Joe keeps his Icom IC-705 cool during long FT8 sessions

6 Comments

Many thanks to Joe (KD2QBK) who writes:

Hi Thomas:

I’ve recently discovered QRP FT8, which I’ve been working with my Icom IC-705. I run with an end-fed sloper that runs out of my 2nd floor shack window using a 49:1 unun and a length of RG-58. I’m also using an Emtech ZM-2 tuner between the antenna and the radio when needed.

The set up works really nicely, except for the way FT8 heats up and overtaxes the radio after a while. Searching around a bit, I’ve found just the right solution for that issue. The AC Infinity MULTIFAN S1 USB-powered table fan.

https://amzn.to/3DvqemJ (affiliate link)

It’s basically just a 3-inch square fan like you’d find in a computer or some other electronic devices, with rubber “feet” attached. It can stand upright or lay flat depending on your need. it’s stated purpose is to cool or ventilate routers, game consoles, audio equipment, etc.

The AC Infinity MULTIFAN S1 includes a speed control switch and an inline USB socket to daisy-chain other devices. One caveat with the inline socket: because it’s placed in the line between the fan and the speed control switch, the switch must be set to high speed else the socket won’t have adequate power for the attached device.

All I do is plug the fan into a USB socket and place it at the rear of the radio, sans battery, to keep it cool. I have it set up to blow onto the radio. Obviously I need to power the radio with an external source when the battery isn’t attached. I’ve not tried to use the fan with the battery attached, but I don’t think it would help much. The ventilation slots next to the battery compartment don’t seem wide enough to let much air in. Continue reading How Joe keeps his Icom IC-705 cool during long FT8 sessions →