On the morning of May 10, 2021, I had a hankering to head to the Blue Ridge Parkway for a quick park activation.
I had a particular spot in mind–one that’s only two miles or so from my QTH as the crow flies. The only wrinkle in my plan was that we were expecting rain all morning and at our house we were in thick fog and light, steady rain.
Normally when I have these conditions, I look for a sheltered site, but I thought it might be a great time to take out the TX-500 since it’s weather-resistant. Why not, right?
I packed the lab599 Discovery TX-500, my Chameleon MPAS 2.0 vertical, and my Elecraft T1 antenna tuner to pair the two. I also brought along some rain gear.
Although the activation site is close to home as the crow flies, it actually takes about 30 minutes to drive there. By the time I reached the site, the skies were mostly clear and the sun was shining! This time of year, it reminds me of living in the UK: if you don’t like the weather, just wait five minutes.
This was very much a road side activation. The spot I chose isn’t an overlook–although it did provide amazing views–it was simple a pull-off.
This is where antennas like the MPAS 2.0 are so useful: they are self-supporting and very quick to deploy. Since I was set up right off the road, I also appreciate using verticals rather than wire antennas since the antenna and throw line aren’t in the way of others who might choose to park in the same pull-off. I can easily deploy the counterpoise and feedline so that it’s out of the way.
As with most park activations, I started on 40 meters CW and only operated 5 watts.
I quickly racked up five contacts on 40 meters, then the band fell silent.
I moved up to 30, then 20, down to 80, back to 60 and 40 again.
About 30 minutes had passed since I was last on 40 meters, so new hunters were checking the bands. I snagged a total of seven more contacts in about eleven minutes.
Obviously, 40 meters was the only band open that morning!
A quick note about 80 meters
I get a lot of questions from readers and YouTube subscribers about my use of the 80 meter band during the daytime.
I go into more detail about this in the video, but contrary to what many think, 80 meters can be a very useful daytime band for POTA activators.
While it’s true that you’re not going to work DX on 80 meters during the daylight hours (else, highly unlikely), you can still work local and regional stations.
Keep in mind that POTA, WWFF, and SOTA activations aren’t about working DX. DX is fun and perhaps a personal goal, but it has nothing to do with success in achieving a valid activation.
Basically, any contacts–DX or local–will get you what is needed for a valid activation.
If, like me, you live in a part of the country where there are a concentration of park and summit hunters/chasers within a daytime 80 meter footprint, then hop on that band and give it a go!
I’m not sure how useful this might be for activations in sparsely populated areas like Montana or the Dakotas, for example, but along the east and west coast, 80 meters is your friend.
At this particular activation, I didn’t didn’t employ an efficient antenna for 80 meters. While I’ve made numerous 80 meter contacts on the CHA MPAS 2.0 in the past, it’s just not physically large enough to be efficient on that band. The CHA Emcomm III Portable or another long wire antenna would have provided better results. But I knew that 40 meters and possibly 30 meters would be my best bet that day, so the MPAS 2.0 was a great choice.
Again: don’t forget about 80 meters. It’s helped me snag many an activation!
Video
Here’s my real-time, leal-life, no-edit video of the entire activation:
You might hear an audio pop when I’m keying on the TX-500. This is happening because I have the audio gain cranked up all the way for the video. While the speaker/mic can get quite loud, when I’ve got it located so far from the camera mic, I run it at 100% volume to be heard. I recently changed my CW T/R recovery time from 100ms to 400s which eliminated most of the audio popping.
Thank you for reading this field report! I hope you’re getting an opportunity to take your radios outdoors this week!
The Blue Ridge Parkway is a massive national park.
This stretch of scenic road spans 469 miles (755 km) from North Carolina into Virginia and crossing 29 counties along the way.
I could activate the BRP every day for the rest of my life and find a new activation spot every single day.
But at the end of the day, I return to reliable spots that I love in particular because of the solitude, the access to trails, and of course the trees.
There are trees along the parkway I know so well, I should name them. They’re always there when I’m ready to deploy a wire antenna.
On Wednesday, May 5, 2021, I visited one of my favorite BRP activations sites that I used during the year-long National Parks On The Air (NPOTA) program in 2016.
This particular site is simply a small hill on the side of the road and at the top, there some excellent trees. There’s also a short path leading to the for the Mountains To Sea trail.
This particular spot also overlooks a valley and has a wee bit of altitude. I’m not sure how meaningful that is for an HF op, but it always seems to help.
Blue Ridge Parkway, NC (K-3378)
Of course, since the lab599 Discovery TX-500 was still so new to me, it had to come out to play.
I decided to skip using an ATU, keep things simple, and pair the TX-500 with my MFJ-1984LP EFHW (above).
I started on 40 meters where I very quickly snagged my good friend, Eric (WD8RIF) who most likely saw my callsign on the RBN and kindly took a break from work to hop on the air work me 5 watts both ways. I’m willing to bet Eric was even a bit envious and wished he could have been outdoors putting parks on the air that morning. It’s fair play, though, because he’s often out doing multi-park runs while I’m working from home.
We must live vicariously through each other, right? Right.
Where was I?
Oh yes, the contacts started rolling in on 40 meters.
I worked K4NAN, KD8IE, K8RAT, N4EX, NE4TN, N9UNX, KB4PY, KC5F, KN3A, and NS4J on 40 meters in the span of about eleven minutes. I really enjoy that kind of cadence.
Next, I moved to 20 meters knowing it might not be an ideal band. I called CQ for nearly 10 minutes, then logged N6GR in New Mexico.
This activation reminded me that POTA often feels like a little impromptu family reunion as so many of the ops I logged that day were POTA friends and also enthusiastic activators.
I decided that 12 logged was a great number, so I called QRT and packed up. I most enjoyable activation!
The TX-500, clipboard, and my logging pads all tuck away nicely in the GR1’s slip-in rucking plate pocket.
Lately, I’ve had quite the backlog of reviews and evaluations building up. Family life has been active–and it always comes first–but also I’ve a number of projects on the table (two kit builds, one repair, two antenna projects), four articles for various publications, two new transceivers (the TX-500 and now an X5105 on loan), and a number of family business projects. ‘Tis the season, I reckon.
Normally, I’d be in Dayton, Ohio right now enjoying a weekend of fellowship and Hamvention/FDIM insanity, but all that was cancelled this year due to the pandemic.
I’ve had a number of projects that sort of force me indoors, but I haven’t felt like doing them. Spring in the mountains of western North Carolina is truly a thing to enjoy (save the allergies)–and it’s an incredible distraction.
On Saturday afternoon, May 8, 2021, my whole family wanted a little outdoor distraction time, so we hopped in the car and drove to a nearby spot in Pisgah National Forest.
The drive takes nearly 50 minutes even though the actual site isn’t even 5 miles from the QTH as the crow flies. The weather was beautiful, but a front was moving through bringing strong wind gusts.
I had planned to set up my activation next to our car along the forest service road, but to shelter myself from some of the winds, I decided instead to set up next to the nearby creek, down the hill a bit.
This particular site is actually located in both Pisgah National Forest and Pisgah Game Land–they overlap, which makes this a Parks On The Air “Two-Fer”.
While setting up next to a creek makes for a beautiful little activation spot, it also adds a lot of extra background noise. Normally, I would have used some in-ear earphones with the TX-500 for sound isolation, but (after twenty minutes on the air and against my better judgement) I decided to make an activation video at this site, so used the speaker/mic instead.
I’ve activated this site numerous times in the past and while it has tall trees and loads of spots to set up, it’s also in a pretty deep ravine, surrounded by tall ridge lines. While this is less a problem with HF as it would certainly be for line-of-site frequencies, history has proven that it makes for a challenging activation.
I deployed my new PackTenna 9:1 UNUN random wire antenna as a vertical. I’m glad I chose the PackTenna because it’s such a low-profile antenna, I knew it would be less affected by the strong wind gusts.
I also decided to employ my Emtech ZM-2 manual antenna tuner during this activation. Why? Because I had never used it with the PackTenna before. So why not?
On The Air
I hopped on 40 meters and started calling CQ. Thankfully, the Reverse Beacon Network found me and the POTA website automatically created a spot from the RBN information.
I worked four stations in four minutes! This was a much better start than I’d ever had at this site before.
Then, nothing…
About 20 minutes passed as I called CQ on 40 meters. This was going to be a challenging activation after all.
I decided to move up to the 30 meter band. I thought there might be some value in showing how to tune the ZM-2, so I started recording one of my real-time, real-life activation videos knowing that the audio might not be ideal with the rushing creek.
On 30 meters, I was able to pick up three more contacts in fairly short order, giving me a total of seven contacts. Only three more needed to validate my activation!
At least 20 minutes had passed since I was on 40 meters, so I decided to hop back down there hoping some new hunters might be monitoring the POTA spots.
Sure enough, I was able to add five more contacts in ten minutes!
My 12th contact is on the back of this log sheet: KF4YEY in FL.
I likely spent a total of one hour on the air. By the time it was over, my wife and daughters were ready to hit the road again: temps had dropped pretty quickly in that one hour time frame and the gusts were strong enough my wife was concerned it could knock some branches loose. (I was less concerned because I always check a site for widow-makers and power lines before setting up.
With such a simple radio kit, packing up was very quick.
This was my second activation with the new TX-500. I really do love this radio.
A number of folks noted in my last TX-500 video that there was an audio pop present as I keyed the radio either with my paddles or with the built-in memory keyer. I had never noticed this before, but I think I know why it’s happening. In my videos, I crank the speaker/mic volume up all the way so the audio can be heard. When I do this, the T/R relay audio pop/recovery is quite noticeable.
I think I may slow the relay recovery to something like 400ms so the audio doesn’t try recovering between characters. The TX-500 isn’t capable of full break-in QSK anyway, so there’s really no need for a 100ms recovery. I’ll also share this feedback with the engineers at lab599 as I suspect this can be sorted out in firmware. In the shack, it’s not an issue because audio levels are in the normal range, but in the field when the audio is cranked up, it’s pronounced. This also would not be an issue if using earphones, of course.
I do love this TX-500 and am very happy I’ve officially purchased it from lab599 and added it to my transceiver arsenal! Now to give it a name and make it official…
While I love the opportunity to head outdoors and play radio, I also love shaking up my field kit and trying different combinations of radios, antennas, and other station accessories.
When using new-to-you gear, though, a best practice is to set everything up at home before you hit the field. This way, you can confirm that you have everything you need and you can also familiarize yourself with the gear prior to activating a park or summit.
Last Sunday (May 2, 2021), I threw caution to the wind. Well, sort of. At the very last moment, I decided to squeeze in an activation en route to my sister’s home to do some brush-cutting and yard work.
The lab599 Discovery TX-500
Basically, I was chomping at the bit to take my lab599 Discovery TX-500 to field.
You see, in August 2020, I received an early pre-production TX-500 to evaluate for one week. In that seven day span, I activated seven parks with the TX-500 and enjoyed every minute of it. Because the loan period was limited, I packed a lot of TX-500 air time that week, then wrote this review for The Spectrum Monitor magazine.
As I mentioned in a previous post, if I would have had the opportunity to buy that loaner TX-500 last year, I would have. It wasn’t an option, though, as so few working models existed at the time. Now that I had a TX-500 in hand again, I couldn’t wait to hit the field with it.
Last Sunday, the weather was beautiful in western North Carolina, but clouds were moving in and we expected scattered showers in the latter part of the afternoon. The last thing I wanted to do was my sister’s yard work in the rain, so I needed to make the activation a speedy one.
But the TX-500 wasn’t the only piece of new gear. I also recently ordered and received a PackTenna 9:1 UNUN random wire antenna. I wanted to see how well it would perform, too, so I decided to pack my Elecraft T1 ATU and give it a go, too!
For the record: when you’re in a hurry, it’s not only a really bad idea to hit the field with a new radio and antenna, but to also throw the entire field kit together in 5 minutes before walking out the door.
On the drive to Lake James, I mentally packed and re-packed the field kit trying to decide if I might have left out a crucial component (say, an adapter or cable). I also made the decision not to make a real-time, real-life video because 1.) this would surely turn into a very clumsy deployment, 2.) I was pressed for time and didn’t want to set up the video, and 3.) I only had my iPhone with me to make the recording which would mean I would be giving up Internet and mobile phone access at the park which is important for spotting purposes.
I reminded myself that the goal of my YouTube channel is simple: real-life, unedited examples of field radio operating.
All of us, at some point, use new equipment in the field and we stumble through the process as we give the system a shake-out. So why not record it, right?
My iPhone battery had about 80% capacity. I knew if I tried to use the personal hotspot while recording the video–so that I could spot myself on the Microsoft Surface Go tablet–it would run down the battery in 20 minutes or so. I immediately put my iPhone in airplane mode to preserve the battery.
Lake James State Park (K-2739)
I know this park quite well and assumed it would be busy on a beautiful Sunday afternoon. It was, in fact. I was confident I’d find a good operating spot, though, because they’ve a large picnic area and loads of tall trees to support wire antennas. And mid-afternoon, it was unlikely all of the picnic tables would be occupied.
I found a nice spot to set up and deployed the PackTenna in short order.
Since my iPhone was doing video duty, I didn’t take extra photos.
I hooked up the Elecraft T1 and attempted to find a match on 40 meters. I thought I did find a match at first, but it turns out that the T1 was in Bypass mode. I didn’t have my reading glasses handy, so thought I saw a great match on the TX-500’s display. Turns out it was floating around 2:1. Still: not a bad match.
I worked five stations, then moved to the 30 meter band. It was then I finally realized the T1 was in bypass mode. I found my spectacles, read the front panel of the T1 and remedied that in short order (I can never remember the button press combo to toggle bypass mode!).
I tuned 30 meters and got a great match.
On 30 meters, I worked two stations.
I then moved up to 20 meters where I worked two more.
Then I moved back down to 40 meters where I topped off the activation with an additional three contacts for a total of 12 as I called QRT.
I’m very grateful to my buddy Scott (KN3A) who worked me on three bands all while he was activating a park in Pennsylvania! Thanks for those P2Ps, Scott!
In fact, I’m grateful Scott took the time to work me on multiple bands because it help bring my numbers above the 10 stations needed for a valid POTA activation.
After going QRT, I quickly packed up my gear (which was easy because there were so few parts), and started the 45 minute drive to my sister’s house. Fortunately, the rain held off the whole time I did the yard work!
I’m so happy to have a TX-500 back in the field radio arsenal.
Shortly after this activation, I officially purchased this loaner TX-500 unit from lab599. As I said in my “unboxing” video, there was no way I was sending this unit back. 🙂 Now I won’t feel bad if it gets dinged or scratched!
I’m sure the TX-500 will be in heavy rotation for a while. Please comment if you have any questions about this radio or the 9:1 UNUN PackTenna. I’d be happy to answer your questions!
Last Tuesday (April 27, 2020), I grabbed my radio gear and my boots then headed to the Blue Ridge Parkway for a quick morning activation.
There were three factors motivating me: 1.) the weather was amazing 2.) I had three free hours in my schedule and 3.) I was eager to pair the LDG Z-100 ATU with the Icom IC-705 for the first time.
Hazel–my canine companion–was as eager to hit the field as I was.
“Let’s go, Dad!”
When she heard me grab my boots, she met me at the door with tail wagging.
I did plan to hit the Blue Ridge Parkway, but had not decided on an actual site. The lowest hanging fruit (easiest sites to reach from the QTH) are the Folk Arts Center and the Blue Ridge Parkway Headquarters. I wanted more altitude, though, so we drove to the Craggy Gardens Picnic Area.
This is a favorite spot for our family, but this time of year can be quite busy–especially around noon. I hoped that I could beat the crowds by arriving early. We pulled into the parking lot around 9:00 AM and were one of the only cars there (score!).
Blue Ridge Parkway (K-3378 NC)
Hazel and I found a concrete picnic table overlooking the parking area and I quickly deployed the CHA Emcomm III Portable over a short tree with my arborist throw line. (Have I mentioned before how AMAZING an arborist throw line is? Why yes, I have!)
I made a video of the entire activation including pairing the Z-100 Plus ATU with the IC-705 via the supplied command cable. In true K4SWL style, I didn’t read the Z-100 Plus owner’s manual or connect the Z-100 Plus to the IC-705 prior to recording.
Frankly, I forgot to read the manual I wanted to show what it was like pairing the Z-100 Plus and IC-705 for the first time without having even referenced the manual. Fortunately, it couldn’t have been an easier process: connect the command cable, and go into the ATU function menu to activate the tuner.
I started my activation on 80 meters and–although the band was dead quiet–I worked K8RAT, WD8RIF, K4JAZ and ND1J in about six minutes.
Next, I moved up to 40 meters where I worked nine more stations in about thirteen minutes.
Finally, I moved to the 30 meter band where I worked two more stations in about five minutes.
One first for this activation was working K8RAT in north central Ohio on all three bands! His signal was incredibly weak on 30 meters, but I recognized his sideswiper “fist” or operating style.
At the end of the activation, I tested the Z-100 Plus by having it match the Emcomm III Portable random wire all the way up the band to 6 meters. It did a fine job.
No surprise here as the Z-100 Plus is a well-loved ATU that’s been on the market for quite some time already. At $150 it’s a proper bargain of an ATU. Unlike the mAT-705 Plus which only pairs with the IC-705, the Z-100 Plus is RF-sensing and can pair with any transceiver on the market.
Video
Here’s a video of the entire activation including pairing the Z-100 Plus with the IC-705 for the first time:
QSOmap
Here’s a QSO map of the entire activation:
This was a very enjoyable activation at one of my favorite Blue Ridge Parkway picnic areas. It was especially pleasant to have the place all to ourselves–a true rarity! I think Hazel was a bit bummed that our local red squirrels (we call them “Boomers”) weren’t out in full force. They’re proper “Squirrel TV” for her since she must be on a leash on the parkway and can’t chase them as she does at home.
If you’re ever travelling the Blue Ridge Parkway, this is a great area. As I mention in the video, the Craggy Gardens Picnic Area also borders a vast tract of land–accessible by a forest service road on the site’s driveway–where the Pisgah National Forest and Pisgah Game Land overlap for a POTA two-fer (here’s a previous report including this two-fer).
Craggy Dome–a SOTA summit–is also very close by. In addition, Mount Mitchell State Park is only 20-25 north on the parkway and offers up both a POTA site and SOTA summit. So many possibilities on this part of the BRP! One could easily activate four parks and two summits in the space of a few hours.
On my way back to the QTH, April 21, 2021, I popped by Tuttle Educational State Forest for what I hoped would be a relatively quick activation.
The previous day I performed a SOTA activation of The Pinnacle and was still feeling the high from that brilliant solar flare propagation experience. Although I knew the solar flare effects were long gone over 24 hours later, I wanted to take in a quick hike and play a little radio: Tuttle was the perfect place for both.
Plus, Tuttle Educational State Forest is such a peaceful quiet place (that is, when no one is burning up rounds at the nearby shooting range). The park is never crowded and it has wide open spaces for playing radio.
My plan was to do a quick activation, then hit their longest trail loop through the forest.
In the spirit of full transparency, LDG sent this unit to me at no cost when they became a sponsor of the SWLing Post and QRPer.com recently (you may have noticed their ads in the right sidebar). While I was really curious how well the Z-100 Plus pairs with the Icom IC-705–using the supplied command cable–I didn’t have a (charged) IC-705 with me. Instead, I pulled out the trusty Yaesu FT-817ND and hit the air!
The Z-100 Plus is RF-sensing, so a command cable is never needed and the ATU will pair with any transceiver.
To use the Z-100 Plus with the FT-817ND, I only needed to hit the Tune button on the front of the ATU then send a string of dits or dashes for it to initiate a match search.
It was no surprise that the Z-100 Plus easily found matches with the Emcomm III Portable.
I started calling CQ on 80 meters and quickly worked my buddy WD8RIF in Ohio.
After a few minutes, I moved up to the 40 meter band where I worked four stations in about four minutes, then the band was quiet for a few minutes.
I then moved up to the 30 meter band and worked four more stations in about seven minutes then silence again.
At this point, I only needed one more contact to validate my POTA activation to have ten stations logged, so I moved up to the 20 meter band and in about four minutes worked two more.
If I didn’t have a limited amount of time and a strong desire to fit in a hike that afternoon, I might have called CQ a while longer on 20 meters and possibly even 17 meters, but I called QRT after a total of 36 minutes on the air.
Herein lies the advantage of having a portable ATU: it gives you frequency agility. On days when propagation is rough, and contact roll in slowly, a good ATU will allow you to find matches on multiple bands so your transceiver will be happy pushing RF through a non-resonant antenna length. I love resonant antennas, but it’s hard to beat the flexibility an ATU gives you.
[My next video, by the way, will feature the Z-100 Plus connected to the IC-705. ]
QSOmap
Here’s how my contacts looked that day on a QSOmap:
I was so busy making the activation video, I didn’t think about taking photos of my rig.
During the hike, however, I did snap these two:
It’s fun returning to the same parks and seeing how the flora changes with the seasons. There’s always something new to see.
I think the next time I activate Tuttle, it might be from the trail–I located a couple of spots that would be ideal for a park bench activation! That might make it feel a bit more like a SOTA activation (although, there are no summits in this forest).
Thanks again for reading through this activation report. Please comment with any questions or feedback. Very curious what LDG Z-100 Plus owners think of this ATU.
Last Tuesday (April 20, 2021), I decided to make a detour to a park I had never visited before: Crowders Mountain State Park (K-2726).
It’s actually quite odd that I’ve never activated this park during the weekly trip to do a little caregiving for my folks: Crowder’s Mountain State Park is a reasonable detour especially compared to some of the more remote parks I’ve visited recently.
What’s really impressive about Crowders Mountain is that although it’s not as large as a national park and it’s very close to the city of Gastonia, it has no less than two unique summits that qualify for Summits On The Air: The Pinnacle and Crowders Mountain.
Both summits are accessible from the main park visitors’ center via a well-maintained trail network.
The propagation forecast looked pretty grim and after my last activation, I thought I might increase my chances of success by hiking to both summits in one visit. This made sense because I would only need 4 contacts per summit to have a valid SOTA activation and I could combine the contacts from each summit to hit 10 total contacts to activate the state park.
I decided to call the park and ask how long it would take to hike to both summits: the ranger told me “about 5 hours, or less if you’re fast.” That meant that once I added in my setup/pack up times and on-the-air time, I would be staring at a minimum of 7-8 total hours.
I (wisely) decided to pass on that opportunity. I simply didn’t have enough time in my schedule for that many hours at the park. That, and I didn’t want to feel rushed–I wanted to enjoy my outdoor time.
I decided instead to activate one summit and simply plan on spending more time on the air then plan to come back to the park for the second summit on a different day.
Before going to bed Monday night, I checked out the trail map and decided to activate The Pinnacle.
Crowders Mountain State Park (K-2726)
I arrived at Crowders Mountain State Park around 11:00 AM local–the weather was nearly ideal.
I had pre-packed all of the radio gear and supplies in my GoRuck GR1 rucksack, so once I arrived, I grabbed the pack, put on my hiking boots, a hat, and hit the trail.
I’ve read that Crowders Mountain State Park can get very busy and it’s no surprise as the park is within easy reach of Shelby, Gastonia, and the Charlotte Metro area. Fortunately, I was visiting on a Tuesday morning, and while I saw at least 30+ cars parked in the main parking lot, I passed other hikers only a few times on the Pinnacle trail. It’s a sizable park and can easily swallow 30 groups of day hikers!
I followed the orange-blazed trail to the summit of The Pinnacle.
The hike was very enjoyable and, frankly, not what I would consider strenuous, but it had enough elevation change to feel like a proper hike. I allowed an hour to reach the summit, but it only took about 40 minutes or less.
Near the summit, there’s a fork in the trail: if you take a right, it leads to the summit, if you take a left, it’ll lead you on a much longer Ridgeline Trail that will eventually take you into Kings Mountain State/National Park–you’d better believe I’ll try that one day in the future! It would be fun to activate two parks and a summit all on foot.
I took a right at the fork and the .2 mile long trail zig-zagged up the side of The Pinnacle.
I was a little surprised to be greeted by the sign above. It’s true that the summit area is quite rocky and you have to watch your step, but this warning is a bit extreme in my opinion (especially since the SOTA activation I did with my daughter recently was orders of magnitude more dodgy!).
If you are activating The Pinnacle and don’t want to climb up the rocky path, no worries. I’m certain the area where the sign is located is well within the SOTA summit activation zone.
The Pinnacle (W4C/WP-010)
Although The Pinnacle is only a “one point” summit, when you reach the top you’re greeted by some impressive views.
The Pinnacle and Crowders Mountain are both outlying mountains so are the tallest points in the area offering beautiful, long-range vistas.
There were perhaps a half dozen hikers hanging out on the summit. I found a quite spot to set up on the side of the summit only a few meters from the top.
During the hike, my buddy Mike (K8RAT) sent a text noting that propagation on 40 meters was non existent. He suggested I play on 20 meters and above, possibly including 30 meters.
Later on, I found out that Mike was 100% correct. Several POTA activators that day mentioned on the POTA Facebook group that 40 meters was completely wiped-out.
I installed the Chameleon MPAS Lite vertical antenna next to me. I’ll admit that I was a little worried it might be too rocky to plunge the MPAS Lite’s stainless spike in the ground, but it turned out not to be the case.
The CHA MPAS Lite has really proven itself as an invaluable SOTA antenna. While the stainless spike adds weight to my pack, it’s less fussy than dealing with guy lines and telescoping fiberglass poles and much quicker to set up. You do need enough ground to plunge that spike into, but if there are trees and bushes on the summit, it’s probably doable!
I started recording a video (see below) of the activation, spotted myself to the SOTA network (even though it would have likely auto-spotted me via the Reverse Beacon Network) and hopped on 20 meters.
Solar Flare!
I had no idea at the time, but we were experiencing a solar flare which explained why 40 meters was completely wiped out.
The effect on 20 meters was simply epic.
I called CQ and was instantly rewarded with a long, continuous string of stations. Within 26 minutes, I had already worked 23 stations with 5 watts and the MPAS Lite vertical. A stark contrast to my previous POTA activation.
The view from my shack
And here’s the thing: the flare opened up 20 meters to local/regional stations as well. I worked stations as close as South Carolina, Georgia, and Tennessee–this is simply unheard of normally. Of course, stations on the west coast were also booming in.
I was a little surprised I didn’t log any European stations on 20 meters, but I suspect they were having a difficult time competing with the strong signals from North America during the flare.
I short: the band opening was amazing fun and even renewed my faith in our local star just a wee bit. (Ha ha!)
After playing on 20 meters, I decided to try 17 meters.
Wow! Without a doubt, I worked more stations on 17 meters in short order than I’ve ever worked during a field activation. In 10 minutes, I worked 12 stations. As with 20 meters, the flare opened up stations that would normally be in my 17 meter skip zone.
Here I was worried about logging the ten stations needed to validate my park activation! After logging 35 total contacts, I decided to pack up.
Here’s a QSO Map of the activation (click to enlarge):
Video
Here’s one of my unedited real-time, real-life videos of the entire activation:
Although the weather app on my phone wasn’t showing any afternoon thunderstorms nearby, there were some patchy dark clouds forming on the other side of the summit and the winds were shifting, so I decided to call it a day and enjoy the hike back down the mountain.
Fortunately, the clouds never amounted to anything but I don’t take my chances with spring weather–it’s fickle, especially along the North Carolina/South Carolina line. That, and frankly, I needed to stick to my travel schedule.
I took my time on the way back down and simply soaked up the outdoors.
I love doing field activations of all types, but I’ll admit that I’m becoming addicted to Summits On The Air because of the hiking opportunities it presents.
There are few things in the world I enjoy more than hiking.
When I’m on a trail, all of my concerns seem to dissolve.
Perspective
On the return hike, I passed by a group of three hikers. All of them were staring at their phones while hiking and one tripped on a tree root in the path. They caught themselves before hitting the ground.
I’ll admit I was thinking at the time that mother nature was saying, “Hey! Wake up, disconnect and enjoy the beauty around you! You need some perspective!” 🙂
I’m already looking forward to visiting Crowders Mountain State Park again. I believe I’ll return within a month and hike to Crowders Mountain, activating both the summit and park.
Sometime, I’d like to hit the trails as soon as the park opens and, perhaps, activate both Crowders Mountain and Kings Mountain parks on foot. That would likely take an entire day when I include the time on the air, but it would also be a lot of fun.
I was telling my wife yesterday that I actually enjoy writing up the odd field report on QRPer. It hit me that there are a couple of reasons why…
For one, a number of readers have reached out and thanked me because they enjoy living vicariously through my field reports and videos. I get it. My family and I enjoy watching YouTube videos of travelers around the world. We avoid the personality-driven channels and focus more on those that are less “produced.” It gives us an opportunity to travel to, say, Spain, France, Finland, or Turkey when we can’t presently do so. It pleases me to no end thinking that my reports and videos could, even in some very small way, offer a little vicarious travel to others.
Secondly, writing up these reports gives me an opportunity to re-experience some of my field time and sort through photos I might have taken along the way. Although it takes a few hours to write a report, I truly appreciate the experience.
Thank you, dear reader, for spending time with me during this outing!
Sure…the sign is a little rough, but the site is nearly ideal.
Lately, when I hit a park or summit to do an activation, I allow a little extra time.
We’re truly in the doldrums of the solar cycle at present, but we’re heading into Solar Cycle 25 with the promise of more sun spots and better propagation. (At least, the ARRL is banking on it!)
If you’ve been doing field activations these past few years, you know how to cope when there are few or no sun spots. You might get less DX contacts, but you can still validate an activation easily enough.
But some days, propagation is unstable or wiped out altogether based on the particles, winds, and CMEs our local star might decide to hurl our way.
Last week (April 12, 2021), I stopped by a new-to-me site: Table Rock State Fish Hatchery.
It was very much an impromptu activation as I decided to visit the site on my way back home after spending time with my parents. Max (WG4Z) mentioned that he had recently visited the site and it had easy access–I checked the map and saw that it was, perhaps, a 30 minute detour.
Table Rock State Fish Hatchery (K-8012)
I arrived on site and found a number of concrete picnic tables and a load of trees ideal for suspending a wire antenna.
Before I deploy an antenna–a wire or vertical–I always check for power lines or cables in the vicinity. This site did have them so I deployed my antenna in such a way that there would be no possible way they could touch.
Always look for power lines!
My buddy Mike (K8RAT) told me in advance that this would be a challenging activation because band conditions were so rough, so I decided to deploy my Chameleon CHA MPAS 2.0 antenna as a random wire instead of a vertical.
I didn’t have my instruction sheet for the MPAS 2.0 so forgot to use the strain relieve at the base of the antenna (not a big deal) and I added a counterpoise wire. I knew it would radiate well.
Next time, I won’t forget to attach the strain relief!
I paired the Icom IC-705 with my mAT-705 Plus ATU knowing this would give me frequency options across the bands. Setup was actually very simple.
I hopped on the air assuming 40 meters might be somewhat fruitful.
Turns out, it was not.
Contacts were slow coming and I could tell conditions were very unstable. In the span of 30 minutes, I had only worked five stations. That’s a very slow rate compared with a typical activation.
I eventually made my way to the 60 meter band and was very happy to rack up an additional three contacts in fairly short order. (I often forget about 60 meters, but it’s a brilliant band and proper blend of 80 and 40 meter characteristics.
When I felt like I’d worked all available stations on 60 meters, I went back up to 40 meters and finally added three more contacts in 20 minutes.
If I’m being honest, this activation felt like a proper struggle. I was fully prepared to call it quits without having logged 10 stations to validate my activation simply due to my schedule. This activation took me to the threshold of my available time.
In fact, I recorded one of my real-time, real-life videos of the activation, but decided I wouldn’t even bother posting it because…well…it would be too long and had so few stations calling in.
In the end, though, and against my better judgement, I uploaded the video to YouTube because, frankly, activations like this are a reality in 2021.
In fact, once I returned home, I looked at the POTA and SOTA discussion groups and there were numerous reports of failed and troublesome activations that afternoon with ops running much more than QRP power.
I even read a report of one unlucky operator who was attempting his first ever POTA activation during that same span of time. He was not able to gather his 10 needed contacts and felt somewhat deflated. I shared my story with him because I think he feared either his gear or his technique were to blame. He was running SSB which would have put him at even more of a disadvantage that day.
Still…I had fun!
A bad day in the field is better than a good day in the office, right? Right!
While I might have been frustrated with the poor propagation, it didn’t stop me from enjoying this outing. The weather was beautiful, and I even had a canine welcoming committee pop by for a visit (you can see that in the video). I also worked a number of friends that day on the air including (I later found out) one very new CW operator.
Although you can’t see it in the photos or video, the Fish Hatchery is close to Table Rock which is a beautiful mountain here in western North Carolina. The drive to the site is quite scenic.
I don’t do POTA, SOTA, or WWFF for the numbers–I do it because I love playing radio outdoors.
Time is your friend
My activations are normally very short because I squeeze them into my weekly schedule. Keep in mind that, regardless of propagation, you can almost always get your 10 contacts with enough time. It also helps if you’re activating a site that is either rare, or if it counts for multiple programs (I’ll often find SOTA summits that are on state or national park land). Chasers from multiple programs are a good thing!
I’d encourage you to check band conditions before leaving home and simply plan to spend more time on the air if conditions are poor. Bring a book with you and put your CW or voice memory keyer to work while you dive into your favorite novel. 🙂
Keep in mind that sometimes our local star will surprise us with amazing band openings. The activation after Table Rock was a case in point. Stay tuned!
Have you struggled to complete an activation recently? Or have you struggled as a hinter/chaser? Please comment!
On Monday, March 22, 2021, I performed three QRP field activations in one day. I started off the day with a visit to Three Top Mountain Game Land, and then headed to Mount Jefferson State Natural Area for a POTA and SOTA activation before heading to my final destination: New River State Park.
I had never visited the New River State Park before but I knew since it was an NC State Park, it would be a beautiful site…and it certainly was.
It being a mid afternoon on a Monday in mid-March, I had the entire park to myself. Well…at least I had the entire park from my access point (this particular park has a number of entry points).
Sadly, I didn’t have a lot of time to explore the park nor any of its trails, because I was on a fairly tight schedule.
New River State Park (K-2748)
I decided to deploy my EFT-MTR 40/30/20 end fed antenna and pair it with the Icom IC-705. Since New River had a spacious picnic area with numerous tall trees, setup really couldn’t have been easier.
In the video below, I actually demo how I used my arborist throw line to deploy the EFT-MTR antenna.
On The Air
While the weather and the POTA site were ideal, propagation was not. I knew that going into the site and that’s exactly why I deployed a near resonant wire antenna instead of a vertical. I say “near-resonant” but the EFT-MTR is actually a resonant antenna on 40, 30 and 20 meters–I repaired mine recently, however, and it affected the resonance. I need to take an antenna analyzer to it and sort that out. In the meantime, though, I simply used the mAT-705 Plus ATU to take the edge off of the SWR.
I ended up only using the 40 meter band to make my 11 contacts in the span of about 33 minutes. Considering the propagation and the fact it was a Monday mid-afternoon, I was pleased with the results.
If I had the time, I would have moved up to the 30 and 20 meter bands, but again, I had a schedule to maintain so I went QRT after working my buddy K8RAT.
Video
Here’s a real-time, real-life video of the entire activation:
I’m definitely coming back to the New River State Park later this year. In fact, I think this would be an ideal spot for a family canoeing and camping trip.
As I’ve said so many times before, this is what I love about POTA and WWFF: they provide an excuse to check out public lands that wouldn’t normally be on my radar. New River is a perfect example since it’s a little too far from the QTH to be a day trip, yet a little too local to be a destination we’d typically plan in our cross-country travels.
On Monday, March 8, 2021, I had a very rare opportunity: nearly a full day to play radio!
I debated where to go the night before and I had a lot of ideas. Do a multi-park run? Activate some new-to-me parks a little further afield? Hit a SOTA summit?
While it was very appealing to plan a multi-park run for POTA/WWFF, I really wanted to stretch my legs and activate a summit. The weather was glorious and it dawned upon me that we’ll soon be entering the season of afternoon thunderstorms which will, no doubt, have a negative impact on my summit plans for the next few months since afternoons are typically when I have time to do activations.
After examining the map, I decided to go to Elk Knob State Park. The summit of Elk Knob is a SOTA site and the park is in both the POTA and WWFF programs.
The round trip hike to the summit (adding in a little trail loop around the park) would amount to about 4 total miles and an elevation increase of roughly 1,000 feet.
Monday morning, I left the QTH around 9:00 and arrived at the park around 11:15–it was a proper scenic drive.
The 1.9 mile hike to the summit took me about 45 minutes. The path was amazingly well maintained: 4′ wide with crushed stone most of the way.
One of the nicest trails I’ve been on in ages–Elk Knob State Park is quickly becoming one of my favorite NC State Parks.
There aren’t any antenna-friendly trees on the summit, so I was happy that I packed the Chameleon MPAS 2.0.
At first, I planned to only bring the top section of the MPAS 2.0 vertical to save space, but the hike was so short, I brought the lower aluminum sections as well. I’m glad I did.
Deployment of the MPAS 2.0 was quick and I the Elecraft KX2‘s internal ATU found a match on 20 meters very quickly.
Elk Knob (W4C/EM-005)
I spotted myself using the SOTA Goat app and received quite a 20 meter CW pileup! As you’ll see in my video below, it was testing the limits of my CW skills for sure.
With 5 watts, I quickly worked stations to my east in France, Spain, and Germany, and to my west all over the west coast of North America. It was a hoot!
I eventually moved to 40 meters and operated a bit, but 40 was suffering from poor propagation so stations that are normally quite strong, were weak that day.
I needed four stations for a valid SOTA activation and 10 stations for a valid park activation. I logged a total of 38 stations in 56 minutes. 75% of those contacts were on 20 meters.
Video
Here’s one of my real-time, real-life videos of the entire activation (less a small amount I removed while eating a quick bite):
When people tell me running QRP is like “trying to play radio with both hands tied behind your back” I’ll show them this video. 🙂
AGN?
While the hike, the weather, and the signals were all in my favor, I’ll admit I wasn’t on my “A Game” that day. We all have days like this where we struggle to copy, to keep up with the flow of contacts, and to send correctly.
In recent weeks, I’ve gotten a number of emails from readers and viewers who said they had a less-than-smooth SOTA or POTA activation and felt a wee bit embarrassed on the air when they struggled copying.
But you know what?
No worries!!!
This is all about having radio fun in the field, enjoying a hike, taking in the views, and soaking up the beautiful weather! It’s not a contest and we have nothing to prove to anyone.
I can also promise you that any chaser/hunter who has ever activated a field site will completely understand if they have to send their call a couple extra times or if they (heaven forbid!) have to re-send their call after you incorrectly copy a character.
This is totally normal.
Be easy on yourself and enjoy the ride. Even on days when I don’t feel like I’m 100% in the groove, I find doing a summit or park activation clears my mind and resets my soul.
My policy? When a mistake is made laugh it off and move on!
Photos
Here are a few extra photos from the Elk Knob hike:
QRP radios, product announcements, reviews, news and more. Low power amateur radio fun!
Please support QRPer by adding us to your whitelist in your ad blocker. Ads are what helps us stay online. All of our ads are ham radio related--no junk, we promise! Thank you!
On the morning of May 10, 2021, I had a hankering to head to the Blue Ridge Parkway for a quick park activation.
I get a lot of questions from readers and YouTube subscribers about my use of the 80 meter band during the daytime.
