Many thanks to Leo (DL2COM) who recently reached out after watching my livestream with Josh at HRCC on the topic of QRP/CW portable.
Leo shared some photos of a complete radio kit he built around the QCX-mini along with a ZM-4 ATU kit he also recently built. Leo has kindly agreed to share these on QRPer.com.
Leo notes:
Attached is a photo of my ultra light kit.
It consists of a QCX-Mini 20m version (self-built), K6ARK EFHW, Palm Radio Pico Paddle, Eremit 2Ah LiFePo battery, headphones and a few cables.
I usually also carry a small arborist kit and if there is still room also the 6m mast from Sotabeams, depending on what I think will work best.
I chose a hard case and went for the Peli 1060 Micro. It has room for everything I need and it could easily hold a bit of RG316 coax in addition (even more if I chose to shorten the 30m arborist line).
The main benefit for me is that I really don’t have to worry at all about what’s inside – compared to a soft pouch. So I can just shove it into my backpack or glove box and forget about it since this configuration is a lot more rugged and water proof – while being slightly heavier. Continue reading Leo’s complete QCX-mini field kit and ZM-4 manual tuner kit→
Being the hopeless pack geek I am, when David (AG7SM) shared photos of his many Tom Bihn bags and how he packed for a recent radio outing, I asked if he’d mind if I shared them here on QRPer.com. He very kindly agreed!
The comments below are my own, but I’ve put David’s descriptions in each image caption:
Brain Bag
The Tom Bihn Brain Bag.
I’ve often considered grabbing a Tom Bihn Brain Bag in the past for one-bag travel, but frankly it’s a little roomier than I needed so overlooked it. I never thought about using it for field radio, but it makes so much sense
“The writing implements and log I’ve stuffed into the Brain Bag.”
There’s no cure for my pack obsession. I’m constantly in a state of assembling and testing the most efficient kits I can conjure up.
Since I rotate a fair amount of radios in my activations, the majority of my kits are modular; meaning, components like antennas, ATU’s, batteries, log/pen, and cables are packed in their own small pouches/pack. Before embarking on an activation, I simply assemble the components in a backpack along with the radio/s I might use that day. Over the years, I’ve developed a certain workflow with this process that ensures I don’t forget components or pack the wrong ones.
But by far, my favorite type of kit are those that are fully self-contained–proper grab-and-go kits that have everything I need inside to, for example, activate a summit.
So when George (KJ6VU) asked if I would be interested in talking about backpacks and gear bags as a guest on the Ham Radio Workbench podcast, I agreed without hesitation.
What I love about the HRWB podcast are all of the truly deep-dives into a wide variety of topics. Quite often, topics are well outside my particular interest area, but the more I listen, the more I’m drawn in. The hosts’ enthusiasm is infectious.
It was an honor to join this fine team for a few hours of workbench projects, ham radio, and pack geekery.
If you’ve never listened to the HRWB podcast, I’d encourage you to check it out and subscribe. I think you’ll agree that the hosts–George, Mark, Mike, Rod, and Vince–have an amazing chemistry.
Thanks again, guys, for inviting me on the show. As I said after the recording, it was great “being on the other side of the lawnmower.”
So I just finished putting together a dedicated, compact field kit for the QCX-Mini. I’m planning to do a SOTA activation tomorrow, if the stars align. Hopefully, they’ll align!
One of the newest products in this kit is my high viz 2mm x 50M Marlow throw line. I learned about this throw line from Mike (W4MAF)–thank you, Mike! It is much less bulky than standard poly throw line and fits in my Tom Bihn small travel tray. We’ll see how well it works tomorrow. First impressions from having used it at the QTH once was very positive.
Again, with any luck I’ll have this kit in the field tomorrow on a summit. If you’ve nothing better to do, look for me on the SOTA Watch spots page!
Anthony (K8ZT) works two 20M stations from the Sacramento platform.
Many thanks to Susan (WB2UQP) who shared this piece by Anthony (K8ZT) which was originally posted to the Elecraft KX forum. Anthony kindly gave us permission to re-post it here on QRPer.com:
AX1 Success Story
All year I have been taking part in State QSO Party Challenge with the goal of working all 45 events.
The problem was I would be on an Amtrak trip on the California Zephyr during the entire California QSO Party (ironically arriving at my destination in Emeryville, CA just after CAQP ended).
So my opportunities to get the two required contacts would be on one of the platforms during one of the Zephyr stops (usually around 5 minutes, but with a few 10-minute stops) so there would be no way to set up an antenna. I was using my Elecraft KX2 and purchased an AX1 for the trip.
My first opportunity was 10 minutes at Glenwood Springs, Colorado Station.
Using the KX2 and AX1 with counterpoise I was able to work three stations in CA on 20 Meter CW: K6XX, W6FRU, and N6TV.
During my next opportunity, now as an in-state station, from the Sacramento platform I worked two stations on 20 Meters:
W0BH in KS on CW, and K2KR in CO on SSB
-Anthony Luscre (K8ZT)
I love this, Anthony! Combining rail travel and radio? It can’t get better than that!
I also love this because it points out the advantage of compact radio setups like the KX2/AX1 pairing: they allow you the flexibility to operate in time frames and conditions other setups might not easily accommodate.
To think that you met your goal of working the State QSO Party from Amtrak platforms in 5 to 10 minute windows of time? Wow!
And it doesn’t even look like you’re breaking a sweat!
On Friday, September 10, 2021, I made a detour to the Table Rock Fish Hatchery (K-8012) on my way back to the QTH.
I love this site: it’s fairly remote, has tall trees, loads of space to set up antennas, convenient picnic tables, incredibly friendly park rangers and, most importantly, a welcoming party.
Welcoming party
These two greet me each time I’m at Table Rock. They’re incredibly friendly and now that they know I’m a complete and total sucker for dogs, they hang around and get attention for quite a while.
Shortly after acquiring a lab599 Discovery TX-500 earlier this year, I did what I always do: invest an insane amount of time in researching and configuring a dedicated field radio kit.
As I’ve mentioned numerous times, I’m a serious pack geek, so this is incredibly fun for me even though the choice is often difficult.
I like to buy packs and cases from manufacturers in the US and Canada when possible, so started searching through all of the options.
Requirements
The Discovery TX-500
I wanted a pack that was compact, versatile, and offered proper padding (even knowing the TX-500 is a rugged little transceiver). I don’t handle my packs with kid gloves, so I expect them to cope with sometimes rough field conditions and still protect the gear inside. I also like a certain level of organization inside the pack.
I wanted the kit to be relatively compact, but large enough to hold the transceiver, all accessories and connections, logging pad and pencil, paddles, a proper arborist throw line, portable ATU, and a 3Ah LiFePo4 battery. A the end of the day, I wanted this TX-500 field kit to be fully self-contained.
In the end, I adopted a pack with which I’m already very familiar…
The Red Oxx Micro Manager
Product image via Red Oxx
Red Oxx is my favorite pack company and if you’ve been a reader for any length of time, you’ve obviously seen a number of their bags and packs in my field reports.
Back in 2016, when they introduced the first iteration of the Micro Manager EDC bag, they actually reached out to me–as an existing customer–knowing that I had been looking for a good radio pack with proper padding (many packs don’t require side padding and internal padding). They sent me a prototype of the Micro Manager for my feedback and then incorporated some of my suggestions.
I also purchased a Micro Manager for my wife who quickly turned hers into a mobile art studio!
She chose a red Micro Manager!Her field-ready art kit
Much like my buddy Steve (AC5F)–whose XYL creates some amazing water color art in the field–my wife (K4MOI) is also an artist and loves to paint/draw during park and summit activations. Her art kit is always at the ready and she’s traveled with it extensively over the past five years.
The Micro Manager is a pack carried over the shoulder, much like a messenger or laptop bag. Those times when my field activations require a lengthy hike, I’ve simply pulled all of the items out of the Micro Manager (since I do modular packing, this is super easy), else I’ve even been known to stick the entire Micro Manager pack into a backpack!
Over the years, Red Oxx has made iterative upgrades to the Micro Manager including a pleated front pocket, slip-in external pocket, and they started lining the internal pocket with a more flexible and thinner dense foam padding. The new padding not only fits the TX-500 better than the first Micro Manager version did, but I believe it will have enough dimension to accommodate the TX-500 battery pack when that’s available next year.
Inside the Micro Manager I also use a Tom Bihn Large Travel Tray to hold all of the TX-500 accessories: key, microphone, ATU, battery, and cables.
I own a number of these large travel trays and highly recommend them. I especially like the ballistic nylon versions for radio kits as they open and close so smoothly.
Video tour
I made a short video tour of the TX-500 Micro Manager kit before a recent activation at Table Rock:
I’ve used this pack for a number of field activations and couldn’t be more pleased. Looking back at the contents, it’s funny: the pack and almost every single item inside (save the notepad and pencil) are made in the USA while the radio is made in Russia! A bit of international harmony going on here!
If you have a field pack for the TX-500 (or any radio), I’d love to know more about it. Please consider commenting with details or even submitting a guest post with photos!
This month, we’ll take a deeper dive into the types of radio kit you might choose to assemble based upon your activity goals. And finally, we’ll look at my “golden rules” of field kits, which I hope you’ll find useful.
Types of field radio kits
I configure and outfit my radio kits based on the environment in which I plan to deploy and operate, and which determines in no small way just what I need to pack besides the basics.
I roughly divide my field kit types as follows…
The Field Day or “Picnic Table” Kit
This is probably the most popular type of field kit in the world of amateur radio. Picnic table kits are designed with portability in mind, but not designed with distance hiking in mind. This is a very popular type of kit for Field Day or park activations through POTA or WWFF.
These kits are typically packed in a backpack, a Pelican-type utility case, or a self-contained and field-ready box.
My picnic table kit is packed in a large Red Oxx C-Ruck rucksack. If I haven’t already made it clear, I’m a self-professed pack geek and I love this Red Oxx Pack because it has large zippered pockets on the outside, a rain flap with storage on top, and one large compartment on the inside.
Many thanks to Carolanne (N0RNM) who shares the following guest post:
A Booty Boss Micro Radio Kit
by Carolanne Fisher N0RNM
I am a bit of a tinkerer and an aspiring POTA activator, so when I received my Elecraft KX2 a couple of weeks ago with its way-too-big carry bag, I immediately started to think about ways I could keep the KX2 protected on the trail in a much lower-profile, light-weight, and easy-to-carry kit that would always be ready to go. The trick was to find a case of just the right size, with plenty of built-in organization and flexibility to build the kit around. I found what I hoped would be exactly what I was looking for from the excellent Red Oxx Manufacturing company (redoxx.com) — a soft-sided compact bag they call the Booty Boss Waist Pack. At least the specs looked good…
My Booty Boss Micro Radio Kit, packed up and ready to roll. The color isn’t exactly “low-profile,” but I figure there is more than enough black and gray in the world.
I am certain that whoever designed this bag did it specifically with the KX2 in mind. It is small enough to take anywhere, yet it fits my entire setup, including the radio, an extra battery pack, an AX1 antenna, complete with its 40 meter extension coil, 2 counterpoises, along with other necessities perfectly. I printed and spiral-bound a small note pad, shoved in a few accessories, and I was ready to rock and roll. The bag is even lightly padded for a bit of peace of mind. I am a CW-only kind of op so a mic is not a concern, especially since if I absolutely needed to use phone, the KX2’s built in mic would serve perfectly fine.
A peek into the top of the fully packed bag. I replaced the carrying strap that came with the bag with a Red Oxx Claw Non-Slip strap to make a more secure carry.
I tested the bag during several “back-porch activations” and everything seemed to work great. That is until I tried to use it under more realistic conditions — without the shaded picnic table to deploy on and the comfortable chair to sit on. Sitting on a rock while balancing the radio on my knee with its floppy AX1 antenna, and note pad while actually tying to send code proved to be a bit more than I could handle. It was clear that something like a clipboard was necessary to complete the micro radio kit, but a normal-sized clipboard would completely break the one-tiny-bag ethos.
A couple of years ago I designed and 3D printed a portable folding easel to support my sketchbook, watercolors, water etc. when out and about nature journaling or urban sketching. It worked great for that so I made a smaller version, added a recess for the radio and made sure it had room for the notepad. In order to fit in the bag, the size, even when opened to its full 8” x 9.5” size is a bit cramped, but with the addition of a leg strap, like a pilot’s lap desk, it it does the trick.
The complete current contents of my micro radio kit. Total weight: 4.3 Pounds
Here is everything currently in the bag and how it all gets stowed:
Front zip pocket
13’ and 33’ counterpoises for use with the AX1
An extra 28.5’ random wire antenna with 50’ of mini throw line attached (fly fishing backer line with two 1 oz. fishing weights) along with a 17’ counterpoise
Front main compartment
Folded radio desk
Note pad
Pencil
Two small interior pockets
Binder post
Spare KX2 Battery
Interior zip pocket
Spare set of paddles w/ KX2 attachment and cord (by Peter GM0EUL)
Spare pencil
Copy of my radio license
Rear main compartment
Ax1 antenna (whip, 20 and 40 meter coils) lying the bottom
KX2 (fits in the bag with the KXPD2 paddle attached)
Large slip pocket
Ear phones
Kit fully deployed with the KX2 on the custom radio desk.
The KX2 fits flat on its back or up on its kick stand in its custom sized recess. A sticky gel pad (from Amazon) placed in the recess pretty much “glues” the rig to the desk until you want to remove it.
Although I don’t use it all that often, the AX1 is my all-purpose, quick-to-set-up and a snap-to-put-away antenna. I mount the bipod inboard to the radio (over the BNC connection) so it fits on the desk to provide support. I wedge the bipod out from the rig with a spare pencil or a stick from the trail placed between the rig and the front leg to take some of the twist pressure off the BNC connector.
Although the micro radio kit holds everything I need to make contacts, there are plenty of times that I like to have a more luxurious set up — a folding chair and table, my Alex Loop antenna, tripod, lunch, iPad, etc. Or perhaps I’m off for a multi-day and need an external battery, a solar charging system, food, shelter, etc. This scenario is precisely where the micro radio kit really comes into its own. It is tiny enough to slip into just about any bigger bag or placed on the waist belt of a backpack. No more wondering if you remembered this or that bit of radio kit or loosing track of things you borrowed from another kit. If you actually did forget something extra you thought you packed, not to worry, the micro radio kit has everything you need right inside to make contacts.
As a tiny everything necessary, nothing extra radio bag, the Booty Boss micro radio kit is, well, the BOSS!
– Carolanne (N0RNM)
Thank you so much for sharing this, Carolanne! As you know, I’m a massive fan of Red Oxx gear and also own the Booty Boss. It’s simply brilliant that you can even pack a folding radio desk inside! Thank you so much for sharing your field radio kit with us.
QRP radios, product announcements, reviews, news and more. Low power amateur radio fun!
Please support QRPer by adding us to your whitelist in your ad blocker. Ads are what helps us stay online. All of our ads are ham radio related--no junk, we promise! Thank you!
