Tag Archives: Tom Bihn

How I pack out my GoRuck GR1 for POTA and Overnight Travel

As I’ve mentioned a number of times on QRPer and on the SWLing Post, I’m a pack geek.  I enjoy organizing and packing my gear for field radio activities and travel.

Last week, I made a very quick overnight trip to visit my parents. My time during this trip was very limited and I did not plan to fit in an activation, but Monday morning, I was able to knock out an errand very early and that freed up a couple of hours in the early afternoon. Fortunately, prior to leaving my QTH, I decided to pack a few travel items in my GoRuck GR1 pack along with a field radio kit built around my Elecraft KX2.

I never leave home without a field radio kit because I never know when an opportunity to play radio might happen.

On the way home Tuesday, I popped Lake Jame State Park and fit in a quick, last minute activation.  Moments before arriving at the lake, I received a request from one of my YouTube subscribers asking if I would make the occasional video showing what’s in my radio packs and field kits.

I’ve been meaning to make these videos but, frankly, often forget when I arrive at a park or summit because I’m just a little too focused on starting my activation.

Since I had some overnight items in my pack, it wasn’t a typical SOTA or POTA field kit, but I decided to make the video anyway. After all, I love watching videos about how others pack and organize their radio and travel kits. But then again, I’m a pack geek. I did mention this right–?

Although I’m not always the neatest person (my wife is probably chuckling at this gross understatement), I’m a meticulous and very organized pack geek. What you see in the video is exactly how I pack when no one is looking. 🙂

I’ll add here that if you’re interested in field radio kits and packs, I’d encourage you to check out my Anatomy of a Field Radio Kit series; Part 1 has already been published and Part 2 will be posted later this week.  In Part 2, I take a much deeper dive into safety gear I take on SOTA activations.

Gear

In the video, I mention that I would attempt to link to all of the items in my pack. I spent time sorting out links this morning; many links go straight to the pack manufacturer because the packs I use typically have no distributors other than the manufacturer, I have also purchased a lot of the smaller items on Amazon, but many can be found in big box stores like Walmart, Target, Canadian Tire, etc.

Activation items

Extra Travel Items in the GR1

Health & Safety Items

US Pack Companies I love…

  • Red Oxx (my favorite overall)
  • Tom Bihn (brilliant tailored/urban travel bags)
  • GoRuck (note that not all are made in the USA these days)
  • Spec Ops Brand (incredible value for tactical packs)

If I missed something, let me know in the comments.

Video

Like all my videos, this one us unscripted, made in one take (unedited), and also has no ads:

Out of order…

So this video was made prior to an activation at Lake James last week. I’ve mentioned before that my Internet speeds at the QTH are worse than dismal, but since this pack video was relatively short, I was able to upload it ahead of the activation video (it took 1.5 days to upload this 2GB file).

The activation video will be published in another week or so depending on my access to some proper broadband service.

Any other pack geeks out there?

I would love to share photos, descriptions, and/or a video of how and what you pack for field activations.  If you’re interested in submitting a guest post, please do so!

Also, I’d love to hear about your favorite packs and how well they’ve held up with time.

Feel free to comment and thank you once again for hanging out here at QRPer.com!

Organizing and packing field radio accessories–three products I love!

As I was packing up my radio gear at the last activation I posted (click here for that field report), I paused to make a quick video and talk about my rucksack, my accessories pouches, and a winder I like to use with the MFJ-1984LP antenna.

Here are the products I mentioned:

GoRuck GR1 USA

This is one of my favorite rucksacks for SOTA activations. I like the fact that it’s low-profile, structured, and feels great on the back even during extended hiking sessions.

It’s also insanely rugged, weatherproof, and (frankly) over-engineered.

My GR1 was made in the USA by GoRuck. This company specializes in packs that are essentially designed to be used and abused.  They’re all backed by a lifetime warranty. You pay for this kind of quality, though.

I purchased mine perhaps 3 years ago during a closeout sale on this particular color variant. When combined with my educator’s discount I think I paid around $210-220 US for it.

I originally bought it because I’m a huge fan of one-bag travel (read an article where I mention this on the SWLing Post). I discovered that the GR1 meets most airline regulations as a “personal carry on.” This means even with discount airlines and regional “puddle jumper” aircraft, I know I can always take it on board and never need to check it. I can easily travel one or two weeks out of this pack.

The TX-500, clipboard, and my logging pads all tuck away nicely in the GR1’s slip-in rucking plate pocket.

But in the field, the GR1 has the perfect amount of capacity for any of my QRP transceivers along with antennas, ATU, cables, and other accessories.

Click here to check out this pack at GoRuck.

Large Tom Bihn Travel Tray

Being a one-bag traveller (and certified pack geek) I’m also a massive fan of US pack designer and manufacturer, Tom Bihn.

I have a number of their packs, pouches, and organizers.

Without a doubt, one of my favorite TB items is the Travel Tray. It’s a brilliant concept: take this with you on a trip, open it up as a tray in your hotel room, and place all of your valuables in it. By doing this, you don’t have to search your room for your watch, keys, wallet, glasses, phone, etc. When you leave the room, all of those easy-to-lose items will be in one place. If you’re in a rush to catch a flight, grab the whole pack by the drawstring, secure it, and throw it in your carry on! It’s a simple, genius little sack/tray!

I also use these to organize radio accessories in my field pack. For example, I have one now dedicated to the TX-500. In the Travel Tray, I store all of the TX-500 adapters and cords, the speaker mic, a set of CW Morse Pocket paddles, a PackTenna EFHW, some RG-316, and a 3 aH LiFePo4 battery. I even carry a spare Muji notepad in it in case I forget my logging pad. With this little bag and the TX-500, I have everything I need to hit the air!

Note that I much prefer the large TB Travel Tray. My wife has both a large and small travel tray, but I find that the small one is just a little too small for most everything I wish to put in it. The large one’s outer diameter is large enough that you can also store a short coil of RG-58 coaxial cable/feed line in it.

Click here to check out large Travel Trays at Tom Bihn.

I love these so much, I purchased two more this week: one in black and one in coyote.

Thingiverse Wire Winder

This particular winder is red because that’s the filament my daughters had loaded in the printer at the time!

Before we purchased a 3D printer (an Ender 3 Pro) I would make wire winders out of anything I could find.  With a 3D printer, however, it’s so easy to make a winder sized perfectly for your application.

You may have seen winders in various colors in my video field reports–they all come from a simple project file on Thingiverse.

This winder is super easy to print and to enlarge or shrink. If you don’t have a 3D printer, likely someone you know does! Ask them to print this for you. They’re incredible useful.

Click here to view on Thingiverse.

Video

I made a very short video talking about all of these products post-activation:

Click here to view on YouTube.