All posts by Thomas Witherspoon

Antennas, Articles, Guest Posts, News, QRP

Dale uses WSPR to test counterpoise orientation

30 Comments
The CHA MPAS Lite

Many thanks to Dale (N3HXZ) who shares the following guest post:

Does your antenna counterpoise orientation matter?

by Dale (N3HXZ)

I am an avid SOTA and POTA activator and love field operation. I use a portable vertical whip antenna with a single counterpoise for my antenna system and have always wondered if orienting my counterpoise would provide some signal strength gain in a particular direction.  I decided to run a series of tests using WSPR to gather field data, and use statistics to answer the question:

Does one counterpoise orientation favor another in terms of average signal strength?

WSPR is a great tool for antenna testing. You can study various antenna configurations by making some WSPR transmissions and then checking the data on the WSPRnet database to see how well the signal was received at various stations located all over the world. You have to be careful in interpreting WSPR data though as receiving stations have different antenna and radio configurations, and the band propagation can vary rapidly at times. So how do you take advantage of all the data you receive from stations and draw some meaningful conclusions? I have found that using proven statistical theory in analyzing the transmitted signal strength received from individual stations can provide you results that you can confidently trust.

So what statistical algorithm is helpful?

For antenna signal strength comparison between two configurations, you can use an independent two-sample t-test with a one-tailed t-test evaluation. It sounds like a mouth-full, but it is quite simple. For our purposes, the t-test compares the average signal strength at a given receiving station from two different antenna configurations. The one-tailed test validates or invalidates the hypothesis that one antenna configuration produces an average signal strength greater or less than the other antenna configuration.

The testing requires that you run WSPR long enough to gather multiple reports at a single receiving station for both antenna configurations. Using the signal strength reports, you compute the average signal strength and the standard deviation of the signal strength over the sampled data points. Excel can easily provide that data.  With this information and the number of sample points for each antenna configuration (they can be different), you then run a calculation by hand or in Excel to compute the ‘t’ value.

This ‘t’ value is then compared to a critical value for the number of sampling points from a ‘Students t table”. If the ‘t’ value is less than the critical value you can confidently conclude that the hypothesis is false and therefore conclude that there is no significant difference in the mean value of the signal strengths between the two.  If the ‘t’ value is greater than the critical value you can accept the hypotheses that one antenna configuration produces a greater or less average signal strength than the other configuration. Continue reading Dale uses WSPR to test counterpoise orientation →

Accessories, Articles, Field Radio Kits, Field Reports, Grab And Go, Morse Code, News, Portable, POTA, QRP

Testing my new Headrest QRP POTA Field Kit!

8 Comments

I love field radio kits.

If you’ve read my “Anatomy of a Field Kit” series, you’ve likely gathered that field kits are a bit of an obsession. [Yeah, understatement alert!]

My field kits roughly fall into two main categories: modular and fully self-contained. My modular kits are ones where components like the battery, antenna, throw line, key, and radio are in separate pouches and can easily be combined to make a complete station before I leave for an activation.

My fully self-contained kits are ones that quite literally have everything needed to perform a park or summit activation in one pouch or box. A good example that I’ve documented here is my MTR-3B field kit.

For more on this, again, check out my “Anatomy of a Field Kit” series.

Vehicle kit

If you’re a devoted park and/or summit activator, I think it’s important to keep a dedicated kit kit in your car at all times. Why?

  • It’s ready to grab for impromptu activations
  • It’s handy in case of road-side emergencies in remote areas
  • It’s always  accessible to demonstrate amateur radio to those who are curious
  • It’s always always there for those times when you hadn’t planned to play radio, but the opportunity presents itself

I always have a full radio kit in my Subaru and over the years, I’ve changed and adapted it. For the most part, though, it’s been located in the trunk/boot and lives with anything and everything else I keep back there. Sometimes, it’s in the way when we need to fill that trunk space with family items for a trip or when we’re hauling things around town. Other times, it’s floating/sliding around freely in the back.

On long family trips, I’ve been known to store radios under the floor, but it’s a true hassle to remove them because I have to remove anything in the trunk before lifting the floor.

Contraband I hid in the car during our two month Canada trip last year.

I’ve always wanted a way to store my kit in the car in a dedicated space. In the past, I’ve tried to make a kit that could fit under the driver’s seat–thinking that might be ideal–but there’s very little clearance under it and it’s difficult to remove.

Enter the BROG Headrest Pouch Kit

Before I placed my initial order for the Blue Ridge Overland Gear (BROG) Gadget Bag, I checked out other items on their website. One that immediately caught my attention was their Headrest Kit.

It consists of a Velcro panel that fits around a vehicle headrest and a pouch (or pouches) attach to it.

BROG caters to Overlanders and vehicle storage/organization is huge in that community. The headrest kit makes a lot of sense: it’s using space that’s accessible, doesn’t interfere with any passengers, is off the floor, and is otherwise underutilized!

The big questions, of course:

  1. would the pouch offer enough space to store an entire radio kit,
  2. and would the kit weight too much for the Velcro back to hold it in place?

I asked for the Headrest Pouch Kit ($47.99) to be sent with my Gadget Bag order.

BTW: Big thanks to BROG for giving me flexibility with this order. Since I had no experience with their gear, I asked that they send me a list of items and allow me to evaluate them, then pay (full price) for what I decided to keep. 

Would it work?

I knew I’d need to store a very small transceiver in this dedicated pack. A few could potentially fit the bill–namely the:

  • Mountain Topper MTR-3B
  • Venus SW-3B
  • QCX-Mini
  • TEN-TEC R4020

I eliminated the QCX-Mini from this list because it’s mono band (mine is set for 20M) plus, I really love the field kit I already designed for it. Same for the MTR-3B–the kit I built for it is now time-tested and I love it as-is. The R4020, while quite compact, is the largest in this group of wee rigs. Continue reading Testing my new Headrest QRP POTA Field Kit! →

News

QRPer Notes: Retekess V115 as a Speaker, Real Time Prop Map, and the Long Island CW Club Podcast

7 Comments

Because I receive so many tips from readers here on QRPer, I wanted way to share them in a concise newsletter format.  To that end, welcome to QRPer Notes, a collection of links to interesting stories and tips making waves in the world of radio!

Retekess V115… a versatile addition to a ham radio kit

Many thanks to Jamie (AA4K) who shares a video he made showing the Retekess V115 as an external speaker:

Click here to view on YouTube.

Real-Time Propagation Map

Many thanks to Andrea who notes:

[This propagation map is] based on WSPR, PSKreporter, DXcluster and other data:

https://hf.dxview.org/

Not a prediction, but based on real signals.

New Long Island CW Podcast

Our Premier Episode!

Is it hard for you to keep track of all the LICW Classes and News? Then dive into the “This Week in LICW” podcast, weekly with Duff WA7BFN and learn more about what’s happening in the club! Duff will talk about what’s new, noteworthy and all the things that are happening in the club, so you won’t miss out! So, If you want to be sure you understand everything that’s happening in the Long Island CW Club, don’t miss an episode!

Click here to listen via BuzzSprout.

Click here to join the LICWC.

Accessories, Field Reports, Grab And Go, Morse Code, News, Portable, POTA, QRP, Reviews, Videos

Field Report: BROG Gadget Bag Tour, New Anker Speaker, & Pairing the KX3 w/the MC-750 for Serious QRP POTA Fun!

29 Comments

On Tuesday, March 28, 2023, I packed my Elecraft KX3 and took it to the Zebulon Vance Historic Birthplace (K-6856) for a nice, relaxing, early afternoon POTA activation!

It had been a few months since I’d taken the KX3 to the field and it really does deserve some outdoor time because…well…I still think it’s one of the best HF field radios on the market.

I’m spoiled, though, because I also own a KX2 and it does 80% of what the KX3 does, is much smaller, and sports a very long-lasting internal battery. Because of this, my KX2 gets way more field time and the KX3–hooked up to a KXPA100–is my main radio in the shack.

When I make an activation video in the field, I like using a speaker rather than recording from the line out of the radio. Besides the extra post-processing, sometimes the line-out audio from left and right channels are out of phase from each other and end up cancelling each other out in YouTube videos if listening in mono. I recently learned how to fix this, but I find the whole process just adds *that* much more time to post-processing and I’m always pressed for time.

The Elecraft KX3 has a built-in speaker, but it’s pretty anemic. I almost always pair the KX3 with an external speaker to amplify the otherwise excellent KX3 audio for my activation videos.

On this particular day, I had a new speaker to try as well: an Anker Soundcore Mini. I purchased this speaker on the same day I posted Mike’s speaker search and review of the Soundcore Mini. Although I have a Sony SRS-XB12 portable speaker and love it, they’re no longer produced and the battery life isn’t quite as good as the Soundcore Mini (Anker states up to 15 hours per full charge).

This activation would give me an opportunity to really test the Anker Soundcore Mini in the field. In the end, it did a brilliant job.

I should note that I also brought my Blue Ridge Overland Gadget Bag (see above) to the field that day, so I include a little tour and overview of this pack in my activation video.

I did recently post a review of the BROG Gadget Bag here on QRPer as well.

Zebulon B. Vance Birthplace (K-6856)

As I mention in my activation videos, Vance is a small park and, unless you plan to operate from your car, there’s really only one good site to set up: in the picnic shelter. Thing is, if a school, club, or civic group is scheduled to meet that day, the picnic shelter will almost certainly be reserved for them.

Each time I activate Vance, I ask the park staff in advance if the picnic shelter is reserved and if it’s okay if I perform the activation. Fortunately, the shelter is reserved only about 20% of the time. On days when it’s reserved, I simply activate elsewhere.

On the 28th, I had the site to myself and the staff encouraged me to activate as long as I wanted to. Continue reading Field Report: BROG Gadget Bag Tour, New Anker Speaker, & Pairing the KX3 w/the MC-750 for Serious QRP POTA Fun! →

Field Reports, Morse Code, News, Portable, POTA, SOTA, Videos

QRP DX: A beautiful day for SOTA on Flat Top Mountain!

23 Comments

The weather on the morning of April 4, 2023, was absolutely outstanding!

I woke up that morning, drank a cup of coffee, looked outside and knew what would be in store the day: a SOTA activation!

My schedule was actually open that fine Tuesday because my daughters were on spring break from school, so the only problem was deciding which summit to activate. A good problem, in other words!

After staring at the SOTL.AS map for a while, I decided to activate Flat Top Mountain (W4C/EM-026) near Blowing Rock, North Carolina. One of the main reasons I chose Flat Top was because the roughly five mile round-trip hike is such a pleasant, casual one. My left ankle was recuperating from a bit of a strain, so I knew Flat Top’s flat, wide carriage trails would fulfill my need for exercise without straining my ankle (which, by the way, is doing much better now).

The drive to Flat Top is a beautiful one–a good third of it is on the Blue Ridge Parkway including the Linn Cove Viaduct which offers up stunning long-range views. I made my way to Moses H. Cone Memorial Park, at BRP milepost 294, where I parked the car and put on my hiking boots.

The park was pretty active for early April, no doubt because the weather was so stunning.

I checked out the beautiful Flat Top Manor to see if renovations had been completed.

It looks very close to completion, I have to assume they’ll be open again soon. The old manor was looking beautiful against clear skies!

Flat Top Manor was built by in 1901 by Moses Cone who was a very successful local textile entrepreneur, conservationist and philanthropist. It’s so fitting that this beautiful bit of architecture and these expansive grounds (which includes no less than two SOTA summits) are now protected by the National Park Service for all to enjoy.

I started my hike by following one of the carriage trails in front of the manor. It leads past a farm building, then crosses under the Blue Ridge Parkway two-lane road. Continue reading QRP DX: A beautiful day for SOTA on Flat Top Mountain! →

Digital Modes, Field Reports, Guest Posts, News, POTA, QRP

N2YCH’s “Fly-Away Kit” QRP POTA Activation

8 Comments

Many thanks to Conrad (N2YCH) who shares the following field report:

“Fly-Away Kit” QRP POTA Activation

by Conrad Trautmann, N2YCH

4/15/2023

The National Association of Broadcasters convention is an annual event that takes place every April at the Las Vegas Convention Center in Las Vegas, Nevada. This year, I traveled to the show for work and made some time to activate a park and get another state ticked off my “Activated US States” list. I also didn’t want to miss getting the Spring 2023 Support Your Parks Weekend activator award.

A colleague suggested I visit Red Rock Canyon National Conservation Area, K-7494. The park, which is operated by the US Bureau of Land Management, has a 13 mile scenic drive that has various parking areas you can stop at to get out and explore. Red Rock requires a reservation to visit and costs $20 to enter the scenic drive area. There are places within the park you could activate for free, but I took advantage of my military veteran benefit of free admission and drove the trail and activated at one of the scenic overlooks.

Before I traveled, I had to decide what radio and antenna to bring. I selected the Elecraft KX3 and the AX-1 antenna. Not having to check a bag was key to deciding what to take.

I packed the cables, battery and computer in my brief case and the radio and the AX-1 antenna went into my carry-on bag. I did get pulled out of line by the TSA at JFK airport, but the TSA agent was very nice and just asked a few questions and let me through with no issues.

Before I traveled, I took a look at the park page on the pota.app website and saw that Colin, AK7LV, was the park leader in QSO’s. I looked him up on qrz.com and sent an email asking if he had any good advice for me or could give me some pointers. He responded quickly with suggestions of his favorite locations, how to get to them and even a suggested location where I could pick up a twofer at a trail that crossed through the park. He said I should call him when I get into town. Continue reading N2YCH’s “Fly-Away Kit” QRP POTA Activation →

Accessories, Guest Posts, How To, Mobile, News

Scott builds a mobile desk for HF park-roving

8 Comments

Many thanks to Scott (KK4Z) who shares the following post from his blog KK4Z.com:

Necessity is the mother of invention

by Scott (KK4Z)

Plato’s Republic he said that *our need will be the real creator* or the proverb as we know it today *necessity is the mother of invention*.  Recently, my friend Thomas K4SWL acquired a Yaesu FT-891.  During his YouTube video, he expounded on how much fun he had with it. It did indeed look like fun. During this time I was pondering about doing more day activations instead of overnights.  With the cost of everything still climbing, the need to conserve becomes apparent.  I thought an FT-891 might really be a great radio for these day activations. Then reality set in.

I already have a number of projects I am working on and misc things like maybe having to replace my old 33′ push-up pole, it was not in the stars nor was there a twinkle in my wife’s eye when I mentioned it. In reality, the IC-7300 is a great radio and does everything I need to do especially in the field. I don’t need another radio, I have three 100 watt radios and three QRP radios. I still wanted an easy setup for these one-day activations. I want to drive to a park, set up in a few minutes, operate, tear-down in a couple of minutes, and head for home or another park. I also wanted to make my day activations park ranger friendly. To me, that means trying to be inconspicuous.

I have two projects planned. The first is a desk for my truck. I am making a desk to sit over the center console and front passenger seat big enough to hold my IC-7300, a laptop and a CW paddle. My plan is to secure the desk to the truck and the radio to the desk. I also wanted to make this as cheaply as possible. I used stuff I had on the property such as a half sheet of plywood and some construction lumber. The only things I had to buy were some screws and eye-bolts, about 14 dollars worth.


The plywood was cut to 24 x 38.5 inches. The length covers the center console and front seat while still allowing me to get to the heat/AC controls. I gave the corners a generous radius and I broke the edges with a router. On the underside, I used a 2 x 12 to make a spacer for the center console where the cup holder is and a leg for the other side over the passenger seat. The spacer is glued and screwed to the desktop but the leg is not attached. This is to make it easier to store. I made a socket for the leg using 2 x 2’s. It’s probably easier to look at a picture than me to try to explain. I added eye rings to the rear of the desk and use a bungee cord to secure the desk to the passenger seat. The only other thing I did, sprayed the top with polyurethane. Note. I am not a carpenter or cabinet maker. I use rough hand tools to get the job done and I am often making do with what’s on hand or what’s the cheapest way to do it.

Continue reading Scott builds a mobile desk for HF park-roving →

Articles, Field Reports, Hams, Morse Code, News, People, Portable, POTA, QRP, Skills, Videos

Join Brooks (KO4QCC) on his First CW POTA Activation–!

20 Comments

Friday, March 24, 2023 was a very special day for Brooks (KO4QCC) and for K4SWL.

I’m so excited to share this with you.

You might recall that, last year, I met up with Brooks at Tuttle Educational State Forest as he performed his very first POTA activation in SSB. He did such an amazing job!

Since I first met Brooks, he’s always had a goal of learning CW and activating parks and summits using Morse Code.

I’ve been in touch with Brooks regularly over the past year and have followed him as he progressed on his CW journey.

Though, like me, he has an active family life, Brooks has found the time to practice CW both through lessons and actual on-the-air contacts. Fortunately, this is all possible because–again, like me–his wife and family are very supportive of his amateur radio adventures!

Early this year, we met on 80 meters and had a good one hour rag chew at about 12 words per minute. I could tell he was ready to do his first POTA activation in CW.

To give him a little real-world practice, we decided to hit the field on a day when I was performing an activation and he could log for me in real-time.

I could tell by how well he was logging as I worked stations at 18WPM  that he was ready to perform his first activation, so we made it a goal to do so within the next couple weeks.

Fast-forward to 8:30 AM on March 24 when Brooks and I met at the Folk Art Center on the Blue Ridge Parkway. Coincidentally, this is the same location where I performed my first CW activation!

We deployed his MFJ-1984MP 40 meter EFHW (End-Fed Half Wave) and connected it to his Xiegu X5105 transceiver in very short order. Brooks also chose his lucky CW Morse paddle for this activation.

But before hopping into the field report, let’s back up just a bit…

First CW Activation: Getting there…

Brooks very kindly wanted to share a bit about his CW journey in this field report. He writes:

From the moment I knew of its existence, becoming a POTA activator using CW has been at the top of my “radio bucket list.”

It seemed like the ultimate challenge and I knew I would never be satisfied until I was able to confidently activate parks using CW. There is also a bit of mystique to CW that other modes lack, making it inherently more interesting to me. In this article, I am going to share the path I took to learn CW and how it culminated in a very successful CW activation.

Continue reading Join Brooks (KO4QCC) on his First CW POTA Activation–! →

Field Reports, Guest Posts, Morse Code, Portable, POTA

KN4OK’s Mini POTA Field Report from the Florida Keys

7 Comments

Many thanks to Dave (KN4OK) who shares the following mini POTA field report:

POTA Activation K-3620 Florida Keys Overseas Heritage Trail State Park.

By Dave (KN4OK)

On April 8th, 2023, on our way to the Overseas trail near the 7 mile bridge, is a great place to activate with a picnic table and shade on the water.

I was smart enough to mention to the wife that we were going to activate a park and she was carrying my Elecraft KX2.  Of course, in my hand was the antenna, the MFJ-1889T, and counterpoise wires that I borrowed from my WRC antenna.

After a mile hike on the trail, we stopped at the picnic table and I set the station up on 17 meters CW.  The SWR was pretty good and I made 9 contacts with no problem.  I then switched the radio and antenna to 20 meters and obtained a better SWR.

One thing that I noticed: extending the counter poise wire (33ft) all the way out for both bands helped a great deal.  The jumper holes on the antenna were also changeable and helped as well.  MFJ has a nice manual for band setups, but be sure to adjust for best SWR.  Very easy to do and works great.

The 20 meter band was also a big success and I was very pleased with the performance of the MFJ 1899T antenna.  Thanks for all the previous discussion of the similar antennas that inspired me to take out my antenna.

The end result was 19 contacts, all CW in about 45 minutes on a beautiful day!

My Equipment:

Thanks to all my chasers and QRP rocks!

72

Dave KN4OK dit dit

Field Reports, Morse Code, News, Portable, POTA, QRP

Snagging a little POTA QRP DX with the Chelegance MC-750 and Xiegu G106

3 Comments

Over the past couple of months, I’ve been trying to give the Xiegu G106 a thorough workout in the field. This little HF QRP radio is on loan to me from Radioddity who has very kindly been quite flexible about the loan period.

I want to give the G106 a fair shake-out because I believe it must be the least expensive multi-mode, full HF coverage transceiver on the market. Field ops are always looking for portable, affordable, effective radios to take to the field so many are considering the G106.

Of course, you simply can’t get benchmark performance out of a low-cost leader.

My full review of the Xiegu G106 will be in the May 2023 issue of The Spectrum Monitor magazine. It’s one of the longest reviews I’ve published in TSM because I try to fully explore the pros and cons of this pint size rig in order that pretty much anyone can make a purchase decision based on their own preferences and requirements.

POTA Plan B

On Saturday, March 18, 2023, I  decided to take the G106 out for a very brief activation during a return trip to my QTH.

My park of choice was Tuttle Educational State Forest (K-4861) because it’s conveniently located, is an excellent POTA site, and I wanted to fit in a quick hike as well. Tuttle’s two mile loop fit the bill perfectly.

When I arrived at the park entrance, however, the gates were closed. I had double checked Tuttle’s schedule in advance and was under the impression that they had started opening the park on Saturdays again for the season.

I really wanted to fit in a decent hike so the next logical park choice was Lake James State Park. It didn’t require a major detour and I was certain it would be open.

Lake James State Park (K-2739)

Lake James has two major access points: the Paddy’s Creek Access and Catawba River Access.

I prefer the Catawba River Access even though it’s much smaller than Paddy’s Creek. For one thing, it’s always less busy and they’ve better spots to set up for POTA (since I like hanging wires trees more often than not). Although the Catawba River access lacks the trail network found at Paddy’s Creek, they do have a few trails that can be stitched together for a nice workout.

Lake James State Park Map Catawba River Access

After arriving at the park, I put on my hiking boots and walked the Fox Den Loop and a bit of the Lake Channel Overlook.

I hiked back to my car, ate a bite of lunch, then grabbed my radio gear for some cheap POTA fun!

Higher Bands

The great thing about the G106 compared with some of my more affordable QRP radios (MTR-3B, SW-3B, R4020, TR-35, etc.) is that it’s not limited to CW and it covers all bands from 80 to 10 meters. Continue reading Snagging a little POTA QRP DX with the Chelegance MC-750 and Xiegu G106 →