Tag Archives: SP4 POTA/SOTA Mini Morse Code Magnetic Paddle

Field Reports, Guest Posts, Morse Code, News, Portable, POTA, QRP, Travel

KO4WFP: Braving the Heat at Spring Creek Forest Preserve in Texas

6 Comments

Many thanks to Teri (KO4WFP) for the following guest post:

Braving the Heat at Spring Creek Forest Preserve in Texas

by Teri (KO4WFP)

The last week of July, my family and I visited my husband’s sister and brother-in-law who live in the Dallas, Texas area. Of course, as soon as the decision was made to make the trip, I immediately checked to see if there were any POTA sites nearby. And wouldn’t you know, there is one roughly 12 miles away – Spring Creek Forest Preserve (K-4423). This would be my chance to activate my first Texas park.

Spring Creek Forest Preserve is a city-owned nature preserve in Garland, Texas. The forest contains old growth trees and several rare and unique plants. Seven miles (four dirt and three paved) of trails traverse the property. The park is named for the creek that runs through it. Today, the creek was deceptively quiet and the water level low. However, given the sculpted chalk cliffs that run above the creek and the flood stage signage, the waterway obviously has its wilder moments.

The morning of July 25th, I headed out early for the easy forty-minute drive from my in-laws to the preserve. The weather forecast predicted a high of 101 degrees, easy to imagine as by the time I arrived at the park, around 8 AM, the temperature was already 80 degrees.

I scoped out the parking lot. It was mostly empty on this day. Having no idea how busy the park might become, I looked for a place less likely for people to encounter my antenna. At first I chose a tree on the edge of the parking lot. However, there was nowhere to park my car close by and I wanted to sit inside the car during the activation.

In the middle of the circular parking lot was a tree surrounded by weedy growth. I figured no one would choose to wander through those weeds and thus my antenna would be safe and not need to be flagged.

I soon discovered why no one would want to wander through the weeds – they were full of little oval-shaped stickers! Thankfully they didn’t have long needle-like spikes on them and instead of being painful, were just annoying. They ended up all over my socks, shoelaces, and the hem of my shorts.

It took several tries to get my arbor line successfully in the tree as its branches were mostly aimed upward rather than outward. But on the third throw, I successfully snagged a branch of sufficient height for my EFRW antenna to slope toward my car. Just as it took several tries to snag the right branch, it took several adjustments to get the right amount of tension in the antenna. Rather than retie the arbor line every time I adjusted it, I just tied another slip knot and as such it ended up looking a mess. But I finally got the amount of tension and height I wanted. (By the way, the weeds made for a mess untangling my arbor line after the activation, too!) Continue reading KO4WFP: Braving the Heat at Spring Creek Forest Preserve in Texas →

News

CW Morse N0SA SP4 Mini Paddles in stock again!

12 Comments

Many of you have been asking about N0SA SP4 paddles and when they might be in stock once again.

I’m happy to note that CW Morse have inventory at time of posting. They do these paddles in production runs, so if you find that they’re out of stock again, check back again soon as they’re finishing batches of them every few days.

Click here to check out the SP4 at CW Morse.

Note that CW Morse is a proud supporter of QRPer.com and the link above is an affiliate link that helps QRPer at no cost to you. Thank you!

Field Reports, Morse Code, News, Portable, POTA, QRP, Vintage

Postcard Field Report: Pairing the Elecraft KX3 and Tufteln Random Wire

3 Comments

Believe it or not, the 2023 Hamvention and Four Days In May is only ten days away at time of posting.

Where in the world did the time go–?

If you’re going to Hamvention, I hope to meet you there. When I’m not floating around, I’ll be hanging out at the Ham Radio Workbench/Halibut Electronics table: 3011.

I’m super excited about attending, but I’ve so much to prepare in advance. Every day between now and then is planned out to the max with family activities and projects.

That, and being an introvert (this might surprise some of you), I have to mentally prepare myself for hanging out with 30+ thousand other human beings. I’ll need ten days for that alone. If I appear tired at Hamvention or FDIM, you’ll know why! Ha ha!

Postcard Field Report

I’ve got a load of videos in the pipeline and to keep from falling behind publishing them, you’re going to see more of my slightly shorter “Postcard Field Reports” for the next couple of weeks during my travels.

These postcard reports contain all of the core information, just less wordy.  (In theory!)

Tuttle Educational State Forest (K-4861)

On Wednesday, April 5, 2023, I had a bit of time in the early afternoon to do a POTA activation. Tuttle Educational State Forest was low-hanging fruit as my errands that day took me within a stone’s throw of the park.

I arrived a bit before noon and took some time to record a Hike and Talk video (which will be published in the next couple of weeks).

After the hike, I set up my Elecraft KX3 and paired it with my Tufteln End-Fed Random Wire antenna. Continue reading Postcard Field Report: Pairing the Elecraft KX3 and Tufteln Random Wire →

Field Reports, Morse Code, News, Portable, POTA, QRP

Propagation changes make for a relaxed 17 meter POTA activation at Pilot Mountain State Park

5 Comments

On Saturday, February 18, 2023, I had a rare opportunity: a full day to play radio.

Instead of doing a five park POTA rove, I chose instead to do a summit activation followed by a park activation.

I published the summit activation on Moore’s Knob (W4C/EP-001) a couple weeks ago and planned to immediately follow that up with this report from my POTA activation at Pilot Mountain State Park (which I activated the same day).

In the process of moving my videos from the camera, to my laptop, and then to PC where I do my remote uploads (my bandwidth at the QTH is far too poor to upload large videos) I somehow managed to delete this particular video file.

I was quite frustrated, actually, because this particular POTA activation was challenging. Lately, I’ve had so few examples of just how quiet a band can be when propagation is less stable.

The SOTA activation I performed only a few hours earlier had some of the deepest pileups I’ve ever experienced. By the time I started my POTA activation a couple hours later, all of this had changed–at least on the bands above 20 meters and I’d chosen 17 meters (a WARC band) since a contest was in progress on 20 and 40 meters.

I’m incredibly pleased that I stumbled upon the raw video files on my backup drive. I was able to reproduce the video in its entirety.  I’m so pleased it wasn’t lost!

This is why it’s a little out of sync date-wise with my other reports.

I hope you enjoy this field report:

Pilot Mountain State Park (K-2750)

After capping off a beautiful 4+ mile hike and SOTA/POTA activation at Hanging Rock State Park, I put my SOTA pack in the car and drove 30 minutes to Pilot Mountain State Park.

It being a gorgeous Saturday afternoon, the park was so full of guests the parking lot was completely full.  A park ranger had incoming cars form a line and he allowed cars in as guests departed one by one. When I arrived, there were five cars in front of me. I was very tempted to do a three-point turn and head back down the mountain to the visitor’s center to do the activation. There was plenty of parking there. Continue reading Propagation changes make for a relaxed 17 meter POTA activation at Pilot Mountain State Park →

News

CW Morse N0SA SP4 Mini Paddles in stock again!

12 Comments

Many of you have been asking about the SP4 paddle and when it might be in stock once again.

I’m happy to not that CW Morse is working on a large production run of SP4s right now and have inventory at time of posting. I spoke with CW Morse and they noted that if you find that they’re out of stock, check back again soon as they’re finishing batches of them every few days.

Click here to check out the SP4 at CW Morse.

Note that CW Morse is a proud supporter of QRPer.com and the link above is an affiliate link that helps QRPer at no cost to you. Thank you!

Field Reports, Morse Code, News, Portable, POTA, QRP

KX2/AX1: Second quick activation of the day at Lake James State Park!

2 Comments

As I mentioned in my previous field report, on Saturday, January 21, 2023, I had just enough time to activate two parks in short order on the way back to my QTH

I thought it might be fun to perform both of these activations with the Elecraft KX2 and AX1 combo because they’re so speedy to deploy.

Once again, I wanted to show the whole KX2/AX1 set-up and pack-up process in my activation video.

Lake James State Park (K-2739)

As I pulled into the Lake James Catawba River access, I discovered that there were few other guests there that day. I was expecting more people on a Saturday especially since the weather was so pleasant and South Mountains had been so busy earlier that morning.

Then again, the Catawba River access always has less visitors than the Paddy’s Creek area (which is really the main public access point for Lake James).

I pulled into a parking space, found one of the closest picnic tables, and set up the station in short order.

At South Mountains State Park, an hour earlier, I performed the entire activation on 20 meters. To shake things up a bit, I decided to perform the one at Lake James on 17 meters (note here that the AX1 only works on 20 and 17 meters unless you have the coil which adds 40 meters). Continue reading KX2/AX1: Second quick activation of the day at Lake James State Park! →

Field Reports, Morse Code, News, Portable, POTA, QRP

A quick two park KX2/AX1 POTA run starting at South Mountains State Park!

5 Comments

You might have noticed that I’ve been taking the Elecraft AX1 antenna out quite a lot recently. At time of posting, I’ve almost used it for a month’s worth of activations.

In December, I thought it might be fun to only use the AX1 for one 2023 calendar month–say, the month of March–but since I evaluate and review radios and antennas, it’s just not realistic to make that kind of commitment.

That said, I did decide to simply start using the AX1 as my primary field antenna for roughly a 30-ish day period and, so far, that’s working out very nicely. I thought it might give some real-world context and usage for those who still believe I’ve just been lucky the days I use the AX1 in the field. No better way to test that theory than to just do it!

Mini rove!

It’s been a while since I’ve had time to do a proper park rove. I hope to do a five park rove within the next month or so, if I can clear out space in the schedule. I find roves so much fun and a nice change of pace.

On Saturday, January 21, 2023, on the way back to my QTH in the mountains of WNC, I had just enough time to activate two parks in short order. Having just been challenged by a short activation window at the Vance Birthplace (which, turned into a normal length activation due to a schedule change in my favor) I thought it might be fun to once again, show the whole KX2/AX1 set-up and pack-up process in my activation video.

South Mountains State Park (K-2753)

I chose South Mountains State Park as my first stop.

South Mountains has a number of public access points. I decided to drive to the main park entrance and set up at the equestrian picnic area. Choosing the main park entrance added about 15 minutes to my overall driving time; the Clear Creek access would have been quicker, but I’d been there only recently. Continue reading A quick two park KX2/AX1 POTA run starting at South Mountains State Park! →

Antennas, Field Reports, Morse Code, News, Portable, POTA, QRP

POTA Field Report: The Elecraft AX1’s secret power? Speed of deployment.

19 Comments

I believe I mentioned in the past that when I first purchased my Elecraft AX1, I assumed it would be a bit if a toy or novelty item. I thought it was a fun concept–and that’s why I bought it–but I remember the first time I took it out to the field on an activation, I thought I’d be demonstrating that a compromised antenna delivers compromised performance.

In short? I was wrong.

The AX1 has instead become one of the most valuable tools in my antenna arsenal.

When you are the DX–activating a park or summit–the AX1 is more than capable as long as you live in an area with a reasonable amount of hunters/chasers within your normal propagation footprint.

Speed

The AX1’s secret power, as I mention in the title, is speed of deployment.

Although I can launch a line into a tree and deploy an end-fed half-wave pretty quickly–I’ve literally done this hundreds of times–I can deploy the AX1 even more quickly without breaking a sweat.

Case in Point: Zebulon B. Vance Birthplace (K-6856)

On Tuesday, January 17, 2023, I had a day full of errands and projects in town, but needed to pick up my daughters at a school function around 15:00 local. There were too many variables to accurately predict where I would be at what time, so I didn’t schedule an activation that morning.

As the day progressed, though, I realized I had a very short window and K-6856 was practically en route to the pickup point. After I finished my last errand in south Asheville, I made my way north and based on Google Maps, I had no more than a 25 minute window to fit in a full activation from deployment to pack up.

I stopped in a parking lot en route, pulled out my iPhone, and scheduled an activation at K-6856 on POTA.app.

Keep in mind that my activations are typically short, but 25 minutes for set-up, on-the-air time, and pack-up leaves very little margin for error.

The AX1 is perfect for this type of activation.

A little time math

It takes me two easy minutes to set up the AX1 and maybe one minute to pack it up.  If I wanted to, I could speed that up a bit (I take much longer on camera talking my way through the process). So that’s roughly three minutes to both deploy and pack-up the AX1.

My speaker wire antenna, on the other hand, is also very quick to deploy. With my arborist throw line, I can easily prepare that antenna in four minutes and pack it up in three minutes. Thus, I need to allow roughly 7 minutes to both deploy and pack-up the speaker wire antenna (we have to assume it might take 2 launches of the throw line to snag a branch).

Since it has a built-in ATU and battery the Elecraft KX2 takes maybe 20 seconds to set up. Seriously: pull it out of the pack, connect a key, turn it on. Continue reading POTA Field Report: The Elecraft AX1’s secret power? Speed of deployment. →

Field Reports, Morse Code, News, Portable, POTA, QRP, QRP Radios, Reviews

Breaking in my new-to-me Elecraft K2 and CW Morse SP4 paddles during a POTA activation

9 Comments

Radio addiction is a real thing.

We addicts often justify purchases knowing that, in the world of amateur radio, we can always sell gear we’ve purchased without losing too much money each time.

At least, in theory!

In November, last year, I was in touch with a friend who I recently purchased my second KX1 from; turns out, he had an Elecraft K2 he was willing to part with, as well. This is a radio he built (thus, the workmanship is top-shelf) and had updated over the years to be fully loaded the way I would want it myself: all firmware upgrades, all important upgrades for CW and SSB operation, and an internal ATU.

His was also a 10 watt (QRP) version of the K2; Elecraft owners call these “K2/10s.”

My first K2/10 next to the TEN-TEC Argonaut VI I was Beta testing at the time.

I owned a K2/10 between about 2008 and 2016. I sold the K2/10 to purchase another radio. The week after selling my K2/10, a local ham offered me an insane deal on a used K2/100 (a version with a 100W amp) from a club estate sale. No one in our local club wanted it and he really wanted to unload it. I purchased it and for a good three years it was my only 100 watt radio.

My K2/100

Then, in 2019, I sold the K2/100 for $800 and purchased an Elecraft KXPA100 amplifier with ATU for $800 to pair with my KX2 and KX3.

Using my KXPA100 during Field Day in 2020.

I’ve never regretted that decision because I do love the KXPA100 amplifier, although I seldom use it (so much so, I’ve even considered selling it). To date, it is the only device I own that outputs 100 watts.

I did miss the K2. It’s a fantastic radio to take outdoors and has superb receiver chops for the most demanding, RF-dense conditions.

When my buddy offered up his K2, I couldn’t resist. I made myself a goal, though: I had to sell enough stuff to fund the purchase. My friend was good with this. Even though I could have paid him immediately, I asked if he could wait for payment and shipping until I had gathered the funds from sales. I needed that dangling carrot because, frankly, I dislike selling things; I’d rather give away or donate stuff, but I did need to raise funds for this purchase. Continue reading Breaking in my new-to-me Elecraft K2 and CW Morse SP4 paddles during a POTA activation →

Field Reports, Guest Posts, News, Portable, POTA, QRP, QRPers

Guest Post: Recipe for a Failed Activation in Allegheny National Forest?

13 Comments

Many thanks to Brian (K3ES) who shares the following field report:

Recipe for a Failed Activation at K-0619?

by Brian (K3ES)

A couple of days before Christmas, high winds came, temperatures dropped, and 3 inches of snow made a real nuisance of itself by blowing around and re-covering anything that was swept or shoveled. With daily high temperatures below zero (Fahrenheit) and wind gusts over 40 miles per hour, the weather just didn’t make for much fun outdoors. In fact, we hunkered down and didn’t get beyond the end of the driveway for four days. So when the winds calmed and temperatures rose, I really needed to get out of the house for a bit. What better way than to walk up the road and activate K-0619? Even with temperatures in the low 20s, I should be able to finish a quick activation. And so it was planned…

Of course just before walking out the door, it is always prudent to check on band conditions…

What did the sun just do to me, and how will I ever make 10 contacts on 5 watts before my fingers freeze???

Alright, I really need my outdoor time. Even if it means that I fail to activate the park this time, I’m going for it!!!

I walked down the driveway…

Off to the woods we go…

…up the road…

Fortunately the hike is less than ½ mile…
K-0619, Allegheny National Forest…

… and into the woods.

Snowy, peaceful, and lots of trees to support my antenna.

After getting to my spot, I set up my chair, laid out a trash bag to keep radio gear out of the snow, threw a line over a tree branch (it took two tries), and rigged the antenna. Continue reading Guest Post: Recipe for a Failed Activation in Allegheny National Forest? →