Tag Archives: SOTA

SOTA/POTA activation plans today (March 8, 2021)

The weather is gorgeous here in the mountains of western North Carolina so I’m plotting a SOTA activation of Elk Knob (W4C/EM-005) and Elk Knob State Park (K-2728) or WWFF (KFF-2728).

Propagation isn’t looking that fabulous despite the amazing weather.

I hope to be on the air sometime between 17:00-18:00 UTC and have announced the following frequencies: 7063, 7197, 14040, and 14313. Of course, all of this is subject to change depending on travel time to the site and how quickly I manage the hike to the summit.

I’m planning to take the KX2 and I’ve yet to decide which antenna. Likely will take a vertical because I’m uncertain if there will be trees on the summit.

I plan to make a video to accompany my future field report (again, if all goes well).

If you happen to be near a radio, I’d love to put you in the logs!

Look for me to appear on the Reverse Beacon Network as I’ll start with CW–click here to search. Also, check out the spots on SOTA, POTA, and WWFF.

Really looking forward to a good hike and good weather!

SOTA Field Report: Activating Lane Pinnacle with the Elecraft KX2 and CHA MPAS Lite

I’ll let you in on a little secret. Don’t tell anyone, but I held off making my first Summits On The Air (SOTA) activation  until the stars aligned and I could activate one particular summit completely on foot from my QTH.

Last Thursday (February 25, 2021), my daughter and I hiked to Lane Pinnacle (W4C/CM-018) and performed my first Summits On The Air (SOTA) activation.

Why did I wait so long?

We live in the mountains of western North Carolina where (obviously) there are numerous SOTA summits to activate.

But I wanted Lane Pinnacle to be the first.

Why? Well, it’s the one summit I can hike to directly from my house with my daughter Geneva (K4TLI) and enjoy a proper father/daughter day hike.

I had planned to do this hike last year, but I injured my ankle and let’s just say that the hike to Pinnacle isn’t a beginner’s run.  I knew my ankle would need to properly heal before the journey.

This is also more of a late fall to very early spring hike due to the amount of thick foliage we knew we would have to mitigate. It’s so much easier to keep your bearings when there are no leaves on the trees nor on the green briar!

Last Thursday, I felt confident that my ankle was up to the task. We had a break in the weather as well with moderate temps and lots of sunshine (this, after several days of rain). We knew things could be muddy and slippery, but we also knew that with my busy schedule this might be our last chance to hit the summit before the mountains green up.

So we packed a lunch, plenty of water, radio gear, and (of course) emergency/first-aid kits while trying to keep our backpacks as light as possible.

Hitting the trail!

The first part of the hike requires trailblazing to a ridge line. The distance is short, but the ascent is steep (about 800 feet).  We hike this portion regularly, so knew how to pick our path and avoid the steeper, slippery bits.

K4TLI lead the way!

On the ridge line, we intersected an established single track trail and enjoyed the hike across a couple of smaller summits until we intersected the Blue Ridge Parkway.

If I’m being honest, I had some serious concerns that the trailhead to Lane Pinnacle would be closed. This portion of Blue Ridge Parkway is currently closed to motor vehicles (for the winter season) and I had noticed a number of “trail closed” signs on other portions of the parkway.

Guessing this may be a type of shelf fungus?

If the trail was closed, I planned to simply activate the parkway and Pisgah National Forest for the POTA program. I never hike on trails that have been closed by the park service because I like to obey the rules and I certainly don’t want to paint SOTA activators in a bad light.

When we crossed the parkway, we were incredibly pleased to see that the trailhead was open.

The ascent from the parkway to Lane Pinnacle is about 1,000 feet (305 meters) of elevation gain over a pretty short distance. The trail we were taking–turns out–was primitive. It basically lead us straight up the slope (no switch backs following lines of elevation, for example) and simply fizzled out about one third of the way up.  We could tell it isn’t traveled often at all (although we did find a massive fresh bear track in the mud on the trail!).

Obligatory SOTA report “foot in snow” photo. 🙂

I bushwhacked our way to the top–at times, the slope was about 45 degrees and slippery, but we easily found our way to the summit where our goat path intersected the Mountains To Sea trail.

We found an amazing overlook and took in views of the Bee Tree Reservoir as we ate our lunches.

Geneva grabbed her dual-band HT and made the first summit contact with our friend, Vlado (N3CZ) on 2 meters FM.

On the Air

I knew there would be short trees on the summit of Lane Pinnacle, but I also knew that I wanted to get on the air as soon as possible to allow extra time for our hike home.

I did pack a super compact wire antenna, but opted instead for the Chameleon CHA MPAS Lite vertical. I paired it with my Elecraft KX2.

Gear:

The great thing about the CHA MPAS Lite is how quick it is to deploy–it might have taken me all of three minutes.

Since it was noon, I decided to start on the 20 meter band. I found a clear frequency, started calling “CQ SOTA” with the KX2 memory keyer, and spotted myself to the SOTA network via the excellent SOTA Goat app on my phone.

I had also scheduled my activation on the POTA website in advance because Lane Pinnacle is in Pisgah National Forest (K-4510). My buddies Mike (K8RAT) and Eric (WD8RIF) were also helping to spot me in the unlikely event I wouldn’t have cell phone service on the summit.

Within 20 seconds of submitting the spot to the SOTA network I had a CW pileup.

In all of my hundreds of field activations, I can’t think of a single time that I generated a CW pileup on 20 meters in such short order with five watts and a vertical.

The first station I logged was N1AIA in Maine. The second station was F4WBN in France.  The race was on!

It took every bit of CW skill I had to pull apart the stations on 20 meters. It was so much fun!

I eventually worked Spain and all of the west coast states (WA, OR, and CA) and numerous stations throughout the Rockies and Midwest.

I then moved to 40 meters where I worked stations in the Mid-Atlantic, Ohio Valley, and in the Southeast.

In the end, I had to keep my total time on the air short because I wanted to take my time finding a path from the summit back down to the Blue Ridge Parkway.

In 30 minutes I worked 30 stations. I’m not a seasoned CW operator, so this was quite the accomplishment.

Here’s a QSOmap of my contacts:

I was chuffed! What a fabulous activation to kick off my SOTA adventures.

Video

This time, I did not make a video of the actual activation. For one thing, I didn’t want to carry a folding tripod for the camera and I didn’t want to ask my daughter to film it either. I wanted to keep things as simple as possible to make the most of the airtime I had.

I did, however, make a short video before and after. You can check it out on my YouTube channel:

Hiking home

I really wish we could have stayed on the summit for an hour longer making contacts, but I knew it would be wise to allow extra time to descend Lane Pinnacle especially since I knew a front was moving through later that day.

I decided it would be easier to do my own bushwhacking back down the mountain rather than try to retrace our previous steps. We took our time and I followed elevation lines to make it slightly less steep. Since I took a more south westerly descent, when we reached the parkway, we had to hike north to reach the original trailhead.

The rest of the hike was totally uneventful and incredibly fun. The weather held and we took in the views, the wildlife, and invaluable father/daughter time.

That was the first strenuous hike I had done in months due to my ankle, so let’s just say I was feeling “spent” after our 6.5 hour adventure taking in 2,000 feet (610 meters) of elevation to the summit.

I knew it was bad when I even dreaded walking upstairs to take a shower.  I think I remember telling my wife, “I’m never building a house with stairs again!”

More SOTA!

Now  that I’ve got Lane Pinnacle in the books, I’m ready to start hitting the summits! I’ve got a lot of pent up SOTA energy!

My goal is to activate a total of ten this year. That may sound like a modest number, but since at this point I’m less interested in “drive-up” summits, it’s more difficult to fit SOTA summits into my schedule than, say, typical POTA/WWFF parks.

In fact, I’ve already plotted my next SOTA activation and hope to do it within the next couple of weeks. It’s also a meaningful (to me) summit.

How about you?

Are you a SOTA activator or are you planning your first SOTA activation soon? Please comment!

Steve’s new Icom IC-705 SOTA lap desk

I’ve been in touch with Steve (WG0AT) recently. He happened to be selling his FT-817 at the same time I was looking for a narrow CW filter.  The stars aligned and I now have a 500 Hz Collins CW filter in my FT-817ND.  Thanks, Steve!

Steve also took delivery of his Icom IC-705 recently so we’ve been trading notes about this fine rig. He and I both have a fear of the ‘705 falling off our laps when using it in the field for SOTA and POTA activations.

Steve, being the king of ham radio customization, started working on a portable desk. He shared iterations along the way and his final product seen in the photo above.

The desk is a brilliant design: it’s lightweight, sturdy, has holes for managing wires/cables, a strap to hold it your leg, and even a cup holder. The cup holder is a bit of genius because he likes a good cuppa tea in the field just like I like a good cuppa joe.

The IC-705 will be able to bolt directly to the lap desk so there’ll be no fear of it falling off a cliff in the field.

Of course, the desk will work with any field-portable radio. Steve shared a few more photos:

I’m going to attempt to build a similar desk for my IC-705. The great thing about it is it’ll easily fit in a backpack, too.

Thanks again for letting me share your photos, Steve! We look forward to seeing this desk in action at a summit near you!

Check out Steve’s excellent YouTube channel here.

Ham takes SOTA activation to new level

(Source: Southgate ARC)

Amateur takes unusual route to SOTA

Colin Evans, M1BUU, from near Haworth, West Yorkshire attained SOTA Mountain Goat on Saturday 28th January on the summit of Whernside, G/NP-004.

Colin took rather an unusual approach to his activation of Yorkshire’s highest mountain, by constructing his equipment whilst on the summit.

Colin had taken a QRPme 20m RockMite kit, a home made key kit, a home made vertical antenna kit and a gas powered soldering iron along with him. Sheltering from the wind, rain and snow in a small tent, Colin successfully constructed the RockMite, key and antenna in just under 4 hours.

The first QSO for Colin with his 250mW RockMite was with N1EU near Albany, New York, over 3000 miles away, the three subsequent QSO’s were with European stations, satisfying the SOTA rule requirement of four QSO’s to claim the activation points.

SOTA Mountain Goat is awarded for gaining 1000 SOTA Activator points. For more information, visit www.sota.org.uk

Adam’s Yaesu FT-817ND Go Kit

Adam (KJ6HOT) writes:

“Just wanted to pass on a link to a few videos I put
together in case you’d like to share them, especially the Yaesu
FT-817ND kit I put together.”

Adam has also posted some SOTA activation videos where he uses his go kit (click here to watch).  I’m amazed that Adam manages to fit so much in that small box. Certainly a handy kit for hiking to a SOTA activation!

Thanks for sharing, Adam! I’ll add this link to our Going Portable page. If you have a portable set-up you would like to share, please contact me.

TX Factor: a brilliant Ham Radio show from the UK

Without a doubt, this is one of the best produced Ham Radio shows I’ve ever seen. I eagerly await TX Factor’s next episode.

Click here to view TX Factor’s website. Thanks for the tip, WD8RIF!

SOTAbeams new line of radio stands

KX3-StandMany thanks to Graham (G3ZOD) for this tip:

SOTAbeams (UK) has a new range of perspex stands for popular QRP CW radios.

These include personalized ones with callsign for K1, KX3, FT817, and X1M, and a non-personalized one for KX1, HB-1B, and R4020.

Click here to view SOTAbeam’s range of radio stands.

Thursday SOTA: QRP DX from the Jura Mountains

The Juras are located north of the western Alps, predominantly in France. (Photo: Wikimedia Commons)
The Juras are located north of the western Alps, predominantly in France. (Photo: Wikimedia Commons)

I just received this message from Olivier Parriaux (F4GLD):

This supply is ready!

This Thursday [09 May 2013] we will activate, if time permits, the beautiful summit of Cret de gout which is located in the Jura mountains in JN26WD.

F/JU-004 – Cret de la Goutte Locator JN26wd
46.15140 ° N (46 ° 9 ‘5.0 “N) Longitude 5.86560 ° E (5 ° 51’ 56.2” E) 1621 meters, 5318 feet

Scheduled departure was 0300 TU [UTC] you should be able to follow the ascent via APRS.

We use + or – frequency QRP only Phone on 7/14/21/28 MHz bands depending on the propagation and F4OQU F4GLD Olivier Gilles.

HF Station KX3 5W max, Buddistick antenna, battery and three …
We also try to activate UHF
VHF F0FNC Laurent around 144,290 in SSB.
FT-817 5w max, DK7ZB antenna
We planned things on the air from 5h30/6h30 TU [UTC]

Hoping to see you on the air on Thursday.

73’s to all.

Like Olivier, if you’re planning a SOTA or QRP DXpedition of any stripe, contact me and I’ll be happy to post your announcement here on QRPer.

SOTA at the Charlotte Hamfest, Saturday March 9th

SOTAIf you’re planning to attend the Charlotte, NC hamfest (March 8th and 9th), make a point to join the SOTA (Summits On The Air) forum.  Christian (KF4LXB), provided me with details:

The forum itself is from 11:45am-12:45pm [Saturday March 9th] in the Cabarrus Room B. There will be total of five of us “SOTAteers” KF4LXB, W4ZV, KI4SVM, WH6LE, and W4ZTM with our kits. We hope to be able to set up a table outside of the conference room so we can have some extra “show and tell” time with our rigs for those interested. We want to get the word out to as many people as possible so we can share about something we all love.

Forum page: http://www.w4bfb.org/hamfest2013/forum_sota_webpage.html

Hamfest site: http://www.w4bfb.org/hamfest2013/hamfest.html

SOTA is serious QRP fun. Thanks for sharing this, Christian!

If you have a QRP related event you would like to publicize, simply contact me with the details and I would be happy to post it on QRPer.com.