On Monday, March 22, 2021, I performed three QRP field activations in one day. I started off the day with a visit to Three Top Mountain Game Land, and then headed to Mount Jefferson State Natural Area for a POTA and SOTA activation before heading to my final destination: New River State Park.
I had never visited the New River State Park before but I knew since it was an NC State Park, it would be a beautiful site…and it certainly was.
It being a mid afternoon on a Monday in mid-March, I had the entire park to myself. Well…at least I had the entire park from my access point (this particular park has a number of entry points).
Sadly, I didn’t have a lot of time to explore the park nor any of its trails, because I was on a fairly tight schedule.
New River State Park (K-2748)
I decided to deploy my EFT-MTR 40/30/20 end fed antenna and pair it with the Icom IC-705. Since New River had a spacious picnic area with numerous tall trees, setup really couldn’t have been easier.
In the video below, I actually demo how I used my arborist throw line to deploy the EFT-MTR antenna.
On The Air
While the weather and the POTA site were ideal, propagation was not. I knew that going into the site and that’s exactly why I deployed a near resonant wire antenna instead of a vertical. I say “near-resonant” but the EFT-MTR is actually a resonant antenna on 40, 30 and 20 meters–I repaired mine recently, however, and it affected the resonance. I need to take an antenna analyzer to it and sort that out. In the meantime, though, I simply used the mAT-705 Plus ATU to take the edge off of the SWR.
I ended up only using the 40 meter band to make my 11 contacts in the span of about 33 minutes. Considering the propagation and the fact it was a Monday mid-afternoon, I was pleased with the results.
If I had the time, I would have moved up to the 30 and 20 meter bands, but again, I had a schedule to maintain so I went QRT after working my buddy K8RAT.
Video
Here’s a real-time, real-life video of the entire activation:
I’m definitely coming back to the New River State Park later this year. In fact, I think this would be an ideal spot for a family canoeing and camping trip.
As I’ve said so many times before, this is what I love about POTA and WWFF: they provide an excuse to check out public lands that wouldn’t normally be on my radar. New River is a perfect example since it’s a little too far from the QTH to be a day trip, yet a little too local to be a destination we’d typically plan in our cross-country travels.
On Monday, March 22, 2021, I performed three QRP field activations in one day. I started off the day with a visit to Three Top Mountain Game Land, and then headed to Mount Jefferson State Natural Area for a POTA and SOTA activation before heading to New River State Park.
When plotting my multi-site activation day, I picked Mount Jefferson because it’s a SOTA entity (W4C/EM-021). I only realized later that it’s also a POTA entity (K-3846). I mistakenly assumed Mount Jefferson was a county park rather than an NC state park. To do both a POTA and SOTA activation simultaneously is ideal!
Mount Jefferson (W4C/EM-021)
This was my first visit to Mount Jefferson and, frankly, I wasn’t sure what to expect in terms of hiking.
The park itself is amazing! North Carolina parks never let me down.
The entrance is near the base of the mountain and very close to the town of West Jefferson. The park road climbs up the side of Mount Jefferson –there are a number of spots to park, hike, and picnic.
I had not checked the trail map in advance, but I had read that the summit trail was accessible from the parking and picnic area at the end (top) of the park road.
I hopped out of my car, grabbed my SOTA pack, and very quickly found the trail head.
The trail is impeccably maintained and wide enough for vehicle use (no doubt these trails double as access for tower maintenance on the summit).
The hike to the summit from the parking are was incredibly short–about .3 miles. Normally, I’d want a much longer hike, but since I was trying to fit three site activations in a span of four hours, I didn’t complain.
On top of the summit, one is greeted by a typical cluster of transmission towers.
While I appreciate checking out antennas and towers, these are never a welcome site because they can generate serious QRM, making a SOTA activation difficult.
I also found a park weather station on the summit. Nice!
I searched around and found a spot to set up well within the activation zone but giving me a bit of distance from the towers.
My Yaesu FT-817ND was desperate to get a little SOTA action, so I decided to pair it with the Chameleon CHA MPAS Lite using the Elecraft T1 ATU to find matches.
After putting the FT-817 on the air, I was very pleased to hear that the nearby transmission towers and power lines weren’t causing any noticeable interference. This was a very good sign because, frankly, propagation was very unstable that day and I had real concerns about being able to work stations on 40 meters.
I hopped on the air and quickly realized I’d forgotten to hook my external battery up to the Yaesu FT-817ND. This meant I was running something closer to 2.5 watts as opposed to a full 5 watts. I decided to attempt the activation without the external battery and add it if needed.
I started operating on 20 meters and was very pleased to quickly rack up a number of contacts. I could tell that most of these contacts were via SOTA because I recognized the calls and primarily SOTA chasers.
Within 11 minutes, I worked 10 stations on 20 meters in CW. I was very pleased with how quickly those QSOs rolled in and how easily I logged the four needed for a valid SOTA and 10 needed for POTA activation–all on 20 meters.
Next, I moved to 40 meters where I worked two stations and 30 meters where I worked one. For sure, 20 meters was a much stronger band than 40 and 30 turned out to be.
After working 13 stations, I packed up.
Obviously, 2.5 watts was plenty for this activation!
I would have loved to stay longer, but frankly, I needed to stick to my schedule because I had one more park to fit in that day! (More on that in a future post and video!).
Here’s my QSOmap for the Mount Jefferson activation:
And here’s my full log:
Video
Even though I was a bit pressed for time, I still made one of my real-time, real-life videos of the entire activation. I hope you enjoy:
Next up will be an activation of New River State Park. I hope to post this early next week.
Last Monday (March 22, 2021), I had another opportunity to play radio for the bulk of the day. These are rare opportunities–although I did have another open day only a few weeks ago–so I ty to take full advantage of them! The weather was perfect, so I decided to make a detour to Ashe County, North Carolina en route to visit my parents.
I haven’t been to Ashe County in the better part of a decade although I love this pretty secluded part of western North Carolina.
Ashe County is very much a destination–not a place you’d easily happen upon in your travels. It’s very much worth the detour, though, as it’s close to Boone/Blowing Rock, the Blue Ridge Parkway, and a number of other spots outdoor enthusiasts would love. The towns of Jefferson and West Jefferson are everything you’d expect from small town NC: charming and friendly. Plus, they have some excellent sources of cheese!
I plotted a three park, one summit run for that Monday. I’d have about one hour at each site, which would hopefully be enough to set up, play radio, and pack up. All three sites were new to me–meaning, I had never personally activated them.
My first destination?
Three Top Mountain Game Land (K-3869)
I left my QTH around 9:00 local and arrived on site around 11:30. I had researched the most accessible parking area (there were many for this game land) and one that would be closest to my other destinations.
The game land maps are pretty accurate, but this parking area was a little tricky to find as it’s small, elevated off the road, and you have to enter a private driveway to find it. the “Hunters Parking” sign is, let’s say, “discreet.”
Honestly? Finding these sites is all part of the fun.
Going into this activation, I knew there would be challenges. For one thing, propagation was similar to the day before: poor and unstable.
Secondly, the Reverse Beacon Network (RBN) auto-spotting functionality on the POTA spots page was not working. That was a bad thing because this game land site had no hint of mobile phone service.
I did anticipate both of these issues though, and took precautions:
I contacted my buddies Mike (K8RAT) and Eric (WD8RIF) and gave them my full schedule with anticipated start times for frequencies at each location before leaving the QTH.
I also had my new Garmin InReach satellite messaging device that I could use to text Mike and Eric should they not be able to hear me that day.
As I’ve mentioned in previous post: successful activations (especially if you’re under time pressure) always include being spotted to the POTA network. It’s as if you don’t exist if you’re not spotted.
“CW ATNO”
Another thing working in my favor at this particular site is that it had only been activated a couple times before and both of those times it was via phone only. My activation would be the first time CW had been used at this site for POTA. This means nothing in terms of the Parks On The Air program–meaning, there are no special awards for this sort of thing–but it does give you a bit of an edge because CW hunters will find the site rare and very desirable. They’ll go the extra mile to get logged.
It’s funny: in 2020, I activated numerous proper ATNOs (All Time New Ones) for POTA. There were so many here in western North Carolina that just by going to new sites each time, I ended up activating them for the very first time in phone and/or CW.
POTA grew by orders of magnitude last year, though, and now there are so many activators who would love to be the first to activate a site, new entities are often activated within a day of being added. The only true ATNOs left in NC are game lands that have accessibility issues.
On The Air
I deployed my EFT-MTR antenna that I repaired that weekend. I did a very basic repair, attaching the top end of the radiator back to the in-line coil/trap. Somehow in doing this I changed the antenna enough that my SWR on 40 and 20 meters was in excess of 2.5:1.
No problem: I employed my T1 ATU to bring the SWR back down to 1:1.
I hopped on 40 meters and immediately started working stations. No doubt, the rarity of this park was providing my spot with a little extra attention.
In 23 minutes, I worked a total of 20 stations: that’s about as good as it gets, especially with poor propagation.
Once the initial group of hunters died down, I went QRT.
Normally, I would spend more time on-site and move up the band, but I was on a tight schedule and realized I hadn’t allowed any time to grab a to-go lunch!
Video
I did make another real-time, real-life video of the entire activation from start to finish. If you care to watch it, click this link to view on YouTube, or watch via the embedded player below:
Thanks for reading this report. Three Top was a fun activation and I was very happy I didn’t have to struggle to validate it. The next park that day was Mount Jefferson which also happened to be a SOTA site. I’ll be posting the report and video later this week!
Many thanks to Mike (W6MVT) for sharing the following guest post:
Back to Ham Radio for a Year – A Brief Reminiscence
by Mike (W6MVT)
This story will sound like many I have heard over the past year, but I will write it nonetheless as a note of gratitude.
Last March COVID had just restricted our activities and I was wondering how to spend my time. I had received my licenses back in the 80’s. There was a code requirement, there was no internet, no QRZ, no spotting.
Though I enjoyed ham radio very much, family and work took precedence, and the equipment went into storage. I eventually sold it off (who is dumb enough to sell matching Drakes?).
Fast forward to the around 2010, when I knew I would be retiring and might want to get on the air again. I picked up some used equipment and stashed it away without really using it.
Then 2020 arrived and the world changed dramatically. One day, prompted by who-knows-what, I had the bright idea to dust off the gear and hook it up, mostly to see if it even still worked. A makeshift wire in the back yard and a quick listen and there it was – a CQ.
I was actually nervous to answer – it had been that long. It was KE8BKP, who it turns out, was activating a park. I hadn’t a clue what that meant, but I shakily answered. We exchanged reports and he went on the to the next one. I had two immediate reactions. First, I was reassured by that brief, painless interaction. The stuff worked and I could still “do this.” Second, things had changed a great deal since the “old days.” But I researched POTA and SOTA and DX Clusters and all the other magic that now exists.The point is that POTA gently reopened the door to an amazing hobby, one that still fascinates me. I went on to become an active hunter and now a prolific activator.
Since it has been a year now, I felt it important to acknowledge this moment, and to note one more thing. When an activator answers a call, we don’t know the other person’s circumstances. Maybe they are a new – or returning “old” ham. Maybe it took courage to key the mic or pound the key. I have appreciated the manner in which POTA hams enthusiastically help one another improve, learn and in turn help others. Thanks to Jeff, KE8BKP, and all the others since, and to come. And thanks to the many volunteers that keep the program running each day.
73, and be well,
Mike W6MVT
Mike, I couldn’t agree with you more. I think all POTA, WWFF, and SOTA activators are essentially ambassadors for ham radio. We never know what’s happening on the other end and I strongly believe in patience and understanding when answering calls and performing an exchange. It can have a huge positive impact for the person on the other end.
So glad you found Parks On The Air and that you’re enjoying playing radio once again!
Chameleon Antenna has sent me a number of their antenna systems to evaluate in the field over the past few months at no cost to me. I appreciate not only the opportunity to test these antennas, but to provide the company with my frank feedback.
As I’ve mentioned previously, Chameleon antennas are military grade and build here in the US (check out Josh’s tour of their factory). You pay a premium price–compared to imported options–but their gear is built for performance, easy deployment, and longevity.
What has impressed me most about Chameleon gear is how flexible and modular it is. Their antenna systems are adaptable to almost any situation and always built around the idea of emergency communications.
Recently, Chameleon sent me their new CHA TDL or Tactical Delta Loop antenna. This vertical loop antenna has been designed to be portable, and tunable from 3.5 to 54.0 MHz (80-6M), but, as Chameleon points out, “is most effective on the bands from 10.1 to 54.0 MHz (30-6M). ”
TDL deployment
If I’m being perfectly honest, I wasn’t sure what to expect this antenna to look like–in terms of size–once deployed, so I set it up in the front yard prior to taking it to the field.
Set up couldn’t have been more simple: attach the 17′ telescoping whips to the stainless steel spike (with one whip attached to the Hybrid Micro), extend the whip sections, then attach the loop wire to connect the tips of both whips.
It might have taken me four minutes to set up the TDL on the first go.
This antenna needs a little space for sure: this isn’t one you could easily deploy in a dense forest, but it has a very flat profile vertically. I can’t think of a single park I’ve activated that couldn’t accommodate the CHA TDL.
I like to try to give gear a fair chance when I do evaluations and thought I’d wait until propagation was at least stable before taking the TDL to the field and making a real-time, real-life video (as I used it for the first time). But, frankly, I’m way to impatient to wait for the sun to play fair! Trial by fire…
Lake Norman State Park (K-2740)
On Monday (March 15, 2021) I packed up the CHA TDL and headed to Lake Norman; one of my favorite parks to play radio.
Propagation left much to be desired that afternoon, but the weather was perfect.
I decided to pair the CHA TDL with my Icom IC-705. Since the CHA TDL requires an ATU, I connected the mAT-705 Plus.
NVIS on the low bands
I had no idea what to expect from the CHA TDL in terms of performance, but Chameleon notes that it provides Near-Vertical Incidence Skywave (NVIS) propagation on 40 and 80 meters. NVIS antennas are very popular for the military and for emergency communications since the propagation footprint is much closer to home than it might normally be.
NVIS is also a brilliant option for park and summit activators, especially if they’re activating in an area with a high density of park/summit chasers. For example, if you live and activate sites in the state of Maryland, employing a NVIS antenna might make your site more accessible to the DC metro area, Pennsylvania, Virginia, New York, Delaware, and New Jersey–regions that might otherwise be in the skip zone of your 40 meter signal.
On the air
Operating five watts CW, I started calling CQ POTA on 20 meters and snagged four stations in about seven minutes.
I was very pleased to work a station in California and one in Montana with five watts. (Though I need to check, this might have been my first MT station logged from a park.)
Next, I moved to 40 meters and was very curious if the TDL would provide me with proper NVIS propagation.
It did! One litmus test for me is when I work stations in Tennessee on 40 meters. Typically, I only log TN stations when on 80 meters or when I’ve configured one of my wire antennas for NVIS coverage.
Here are my logs from this 28 minute activation:
Here’s a QSOmap of the activation–the delineation between my four 20 meter contacts and eight 40 meter contacts is pretty evident:
Video
Here’s my real-time, real-life video of the entire activation which also shows how the CHA TDL easily fit in among trees:
In a future video, I’ll show how I deploy the CHA TDL.
Unfortunately, I left my tripod at home, so apologies for the viewing angle as I operated the IC-705.
Summary
This first test of the CHA TDL really couldn’t have gone better.
I was able to easily deploy it on sloping ground, among trees, in a state park, and snag both locals and QRP DX within a brief window of time on the air. All this, while our local star tried its best to interfere.
In terms of construction, the TDL is what I would expect from Chameleon: military grade.
For park activators and Emcomm purposes, the CHA TDL makes for a convenient, portable NVIS antenna on 40 and 80 meters.
While I have lighter, smaller footprint antenna options for SOTA, I must admit I’m very curious how it might perform on 20 and 17 meters from the summit of a mountain. The idea of being able to rotate the antenna and change the propagation footprint is very appealing. I’ll save this experiment for a summit that doesn’t require hours of hiking, though, and one where I know I can jab the stainless steel spike in the ground (i.e. not on top of a rocky mountain).
Any negatives? When I first deployed the TDL at home, we were having 30+ MPH wind gusts. When the gusts shifted, it did move the antenna. This could be remedied pretty easily by using a bit of fishing line filament to tie off one side of the loop. With that said, I’m not sure I’d configure the TDL as a loop if I expected strong winds. Also, as I mentioned earlier, this might not be the best antenna to pack if you plan to include a multi-hour hike in your activation.
And herein lies the brilliant thing about Chameleon Antennas: If I packed in the CHA TDL and found that winds were strong on site, I would simply configure it as a vertical instead of a loop!
The CHA MPAS Lite vertical
The CHA TDL can easily be configured as a CHA MPAS Lite portable vertical: all it’s missing is a counterpoise wire which you can buy separately from Chameleon or, better yet, just use some spare wire you have on hand!
Or, you could configure it as a random wire antenna by directly connecting a length of wire to the Hybrid Micro transformer.
That’s the thing about Chameleon HF Antennas: they can be configured so many different ways.
If you’re interested in the CHA TDL, I’d strongly encourage you to read though the user manual: it’s chock full of info and ideas. Click here to download as a PDF.
Next time I take the CHA TDL out, I think it’ll be to a summit where I’d like to see how it might perform on the higher bands with the ground sloping away from the antenna site.
On Monday, March 8, 2021, I had a very rare opportunity: nearly a full day to play radio!
I debated where to go the night before and I had a lot of ideas. Do a multi-park run? Activate some new-to-me parks a little further afield? Hit a SOTA summit?
While it was very appealing to plan a multi-park run for POTA/WWFF, I really wanted to stretch my legs and activate a summit. The weather was glorious and it dawned upon me that we’ll soon be entering the season of afternoon thunderstorms which will, no doubt, have a negative impact on my summit plans for the next few months since afternoons are typically when I have time to do activations.
After examining the map, I decided to go to Elk Knob State Park. The summit of Elk Knob is a SOTA site and the park is in both the POTA and WWFF programs.
The round trip hike to the summit (adding in a little trail loop around the park) would amount to about 4 total miles and an elevation increase of roughly 1,000 feet.
Monday morning, I left the QTH around 9:00 and arrived at the park around 11:15–it was a proper scenic drive.
The 1.9 mile hike to the summit took me about 45 minutes. The path was amazingly well maintained: 4′ wide with crushed stone most of the way.
One of the nicest trails I’ve been on in ages–Elk Knob State Park is quickly becoming one of my favorite NC State Parks.
There aren’t any antenna-friendly trees on the summit, so I was happy that I packed the Chameleon MPAS 2.0.
At first, I planned to only bring the top section of the MPAS 2.0 vertical to save space, but the hike was so short, I brought the lower aluminum sections as well. I’m glad I did.
Deployment of the MPAS 2.0 was quick and I the Elecraft KX2‘s internal ATU found a match on 20 meters very quickly.
Elk Knob (W4C/EM-005)
I spotted myself using the SOTA Goat app and received quite a 20 meter CW pileup! As you’ll see in my video below, it was testing the limits of my CW skills for sure.
With 5 watts, I quickly worked stations to my east in France, Spain, and Germany, and to my west all over the west coast of North America. It was a hoot!
I eventually moved to 40 meters and operated a bit, but 40 was suffering from poor propagation so stations that are normally quite strong, were weak that day.
I needed four stations for a valid SOTA activation and 10 stations for a valid park activation. I logged a total of 38 stations in 56 minutes. 75% of those contacts were on 20 meters.
Video
Here’s one of my real-time, real-life videos of the entire activation (less a small amount I removed while eating a quick bite):
When people tell me running QRP is like “trying to play radio with both hands tied behind your back” I’ll show them this video. 🙂
AGN?
While the hike, the weather, and the signals were all in my favor, I’ll admit I wasn’t on my “A Game” that day. We all have days like this where we struggle to copy, to keep up with the flow of contacts, and to send correctly.
In recent weeks, I’ve gotten a number of emails from readers and viewers who said they had a less-than-smooth SOTA or POTA activation and felt a wee bit embarrassed on the air when they struggled copying.
But you know what?
No worries!!!
This is all about having radio fun in the field, enjoying a hike, taking in the views, and soaking up the beautiful weather! It’s not a contest and we have nothing to prove to anyone.
I can also promise you that any chaser/hunter who has ever activated a field site will completely understand if they have to send their call a couple extra times or if they (heaven forbid!) have to re-send their call after you incorrectly copy a character.
This is totally normal.
Be easy on yourself and enjoy the ride. Even on days when I don’t feel like I’m 100% in the groove, I find doing a summit or park activation clears my mind and resets my soul.
My policy? When a mistake is made laugh it off and move on!
Photos
Here are a few extra photos from the Elk Knob hike:
Last Tuesday (March 2, 2021), I needed to make a quick trip to south Asheville and pick up some gear I had ordered from REI. Of course, I had a hankering to fit in a Parks On The Air activation. I contacted my buddies Eric (WD8RIF) and Mike (K8RAT) and mentioned I might make a visit to the Blue Ridge Parkway [it’s always a good idea to have others look for you in case your unable to spot yourself on the bands].
By the time I jumped in the car, though, I talked myself out of doing the activation. Propagation was poor and I had a maximum of 30 minutes to fit in a valid activation.
After picking up my gear at REI, I realized, though, that a 30 minute limit made for an awfully fun challenge.
I had to pass by the parkway to go home, so why not? Right?
I did a quick check and, yes(!) I had the Elecraft KX2 and CHA MPAS Lite antenna in the car.
Before leaving REI, I scheduled my activation on the POTA website so that the site would know to auto-spot me if the Reverse Beacon Network picked me up.
Blue Ridge Parkway (K-3378)
I arrived at the parkway in very short order. I decided to do the activation at the Blue Ridge Parkway Visitor’s Center and Headquarters. Normally, I avoid this location because it’s busy and the best spots to set up a radio are in the path of visitors walking around the perimeter of the grounds.
It was a cold, overcast Tuesday morning so, as I expected, I almost had the place to myself.
I deployed the CHA MPAS Lite vertical in very short order–perhaps 3 minutes. Since I had also packed my Pixel 3 camera/phone and tripod in the car, I even recorded a video of the full activation (see below).
In short? I snagged my 10 contacts in about 19 minutes on the air–all on 40 meters CW. Not too bad for a Tuesday morning with five watts and a vertical.
Here’s a QSOmap of the contacts I made:
I also had a first at this activation! I worked ND9M/MM. To my knowledge, I’ve never worked a maritime mobile station at a park activation–certainly not in CW! The map above omits this contact since the location was unknown.
When I submitted my log to Bill DeLoach (our regional contact for POTA logs) said I really need a “Wham Bam!” award for this quick activation. Ha ha!
The weather is gorgeous here in the mountains of western North Carolina so I’m plotting a SOTA activation of Elk Knob (W4C/EM-005) and Elk Knob State Park (K-2728) or WWFF (KFF-2728).
Propagation isn’t looking that fabulous despite the amazing weather.
I hope to be on the air sometime between 17:00-18:00 UTC and have announced the following frequencies: 7063, 7197, 14040, and 14313. Of course, all of this is subject to change depending on travel time to the site and how quickly I manage the hike to the summit.
I’m planning to take the KX2 and I’ve yet to decide which antenna. Likely will take a vertical because I’m uncertain if there will be trees on the summit.
I plan to make a video to accompany my future field report (again, if all goes well).
If you happen to be near a radio, I’d love to put you in the logs!
Look for me to appear on the Reverse Beacon Network as I’ll start with CW–click here to search. Also, check out the spots on SOTA, POTA, and WWFF.
Really looking forward to a good hike and good weather!
I’ll let you in on a little secret. Don’t tell anyone, but I held off making my first Summits On The Air (SOTA) activation until the stars aligned and I could activate one particular summit completely on foot from my QTH.
Last Thursday (February 25, 2021), my daughter and I hiked to Lane Pinnacle (W4C/CM-018) and performed my first Summits On The Air (SOTA) activation.
Why did I wait so long?
We live in the mountains of western North Carolina where (obviously) there are numerous SOTA summits to activate.
But I wanted Lane Pinnacle to be the first.
Why? Well, it’s the one summit I can hike to directly from my house with my daughter Geneva (K4TLI) and enjoy a proper father/daughter day hike.
I had planned to do this hike last year, but I injured my ankle and let’s just say that the hike to Pinnacle isn’t a beginner’s run. I knew my ankle would need to properly heal before the journey.
This is also more of a late fall to very early spring hike due to the amount of thick foliage we knew we would have to mitigate. It’s so much easier to keep your bearings when there are no leaves on the trees nor on the green briar!
Last Thursday, I felt confident that my ankle was up to the task. We had a break in the weather as well with moderate temps and lots of sunshine (this, after several days of rain). We knew things could be muddy and slippery, but we also knew that with my busy schedule this might be our last chance to hit the summit before the mountains green up.
So we packed a lunch, plenty of water, radio gear, and (of course) emergency/first-aid kits while trying to keep our backpacks as light as possible.
Hitting the trail!
The first part of the hike requires trailblazing to a ridge line. The distance is short, but the ascent is steep (about 800 feet). We hike this portion regularly, so knew how to pick our path and avoid the steeper, slippery bits.
K4TLI lead the way!
On the ridge line, we intersected an established single track trail and enjoyed the hike across a couple of smaller summits until we intersected the Blue Ridge Parkway.
If I’m being honest, I had some serious concerns that the trailhead to Lane Pinnacle would be closed. This portion of Blue Ridge Parkway is currently closed to motor vehicles (for the winter season) and I had noticed a number of “trail closed” signs on other portions of the parkway.
Guessing this may be a type of shelf fungus?
If the trail was closed, I planned to simply activate the parkway and Pisgah National Forest for the POTA program. I never hike on trails that have been closed by the park service because I like to obey the rules and I certainly don’t want to paint SOTA activators in a bad light.
When we crossed the parkway, we were incredibly pleased to see that the trailhead was open.
The ascent from the parkway to Lane Pinnacle is about 1,000 feet (305 meters) of elevation gain over a pretty short distance. The trail we were taking–turns out–was primitive. It basically lead us straight up the slope (no switch backs following lines of elevation, for example) and simply fizzled out about one third of the way up. We could tell it isn’t traveled often at all (although we did find a massive fresh bear track in the mud on the trail!).
Obligatory SOTA report “foot in snow” photo. 🙂
I bushwhacked our way to the top–at times, the slope was about 45 degrees and slippery, but we easily found our way to the summit where our goat path intersected the Mountains To Sea trail.
We found an amazing overlook and took in views of the Bee Tree Reservoir as we ate our lunches.
Geneva grabbed her dual-band HT and made the first summit contact with our friend, Vlado (N3CZ) on 2 meters FM.
On the Air
I knew there would be short trees on the summit of Lane Pinnacle, but I also knew that I wanted to get on the air as soon as possible to allow extra time for our hike home.
I did pack a super compact wire antenna, but opted instead for the Chameleon CHA MPAS Lite vertical. I paired it with my Elecraft KX2.
The great thing about the CHA MPAS Lite is how quick it is to deploy–it might have taken me all of three minutes.
Since it was noon, I decided to start on the 20 meter band. I found a clear frequency, started calling “CQ SOTA” with the KX2 memory keyer, and spotted myself to the SOTA network via the excellent SOTA Goat app on my phone.
I had also scheduled my activation on the POTA website in advance because Lane Pinnacle is in Pisgah National Forest (K-4510). My buddies Mike (K8RAT) and Eric (WD8RIF) were also helping to spot me in the unlikely event I wouldn’t have cell phone service on the summit.
Within 20 seconds of submitting the spot to the SOTA network I had a CW pileup.
In all of my hundreds of field activations, I can’t think of a single time that I generated a CW pileup on 20 meters in such short order with five watts and a vertical.
The first station I logged was N1AIA in Maine. The second station was F4WBN in France. The race was on!
It took every bit of CW skill I had to pull apart the stations on 20 meters. It was so much fun!
I eventually worked Spain and all of the west coast states (WA, OR, and CA) and numerous stations throughout the Rockies and Midwest.
I then moved to 40 meters where I worked stations in the Mid-Atlantic, Ohio Valley, and in the Southeast.
In the end, I had to keep my total time on the air short because I wanted to take my time finding a path from the summit back down to the Blue Ridge Parkway.
In 30 minutes I worked 30 stations. I’m not a seasoned CW operator, so this was quite the accomplishment.
Here’s a QSOmap of my contacts:
I was chuffed! What a fabulous activation to kick off my SOTA adventures.
Video
This time, I did not make a video of the actual activation. For one thing, I didn’t want to carry a folding tripod for the camera and I didn’t want to ask my daughter to film it either. I wanted to keep things as simple as possible to make the most of the airtime I had.
I did, however, make a short video before and after. You can check it out on my YouTube channel:
Hiking home
I really wish we could have stayed on the summit for an hour longer making contacts, but I knew it would be wise to allow extra time to descend Lane Pinnacle especially since I knew a front was moving through later that day.
I decided it would be easier to do my own bushwhacking back down the mountain rather than try to retrace our previous steps. We took our time and I followed elevation lines to make it slightly less steep. Since I took a more south westerly descent, when we reached the parkway, we had to hike north to reach the original trailhead.
The rest of the hike was totally uneventful and incredibly fun. The weather held and we took in the views, the wildlife, and invaluable father/daughter time.
That was the first strenuous hike I had done in months due to my ankle, so let’s just say I was feeling “spent” after our 6.5 hour adventure taking in 2,000 feet (610 meters) of elevation to the summit.
I knew it was bad when I even dreaded walking upstairs to take a shower. I think I remember telling my wife, “I’m never building a house with stairs again!”
More SOTA!
Now that I’ve got Lane Pinnacle in the books, I’m ready to start hitting the summits! I’ve got a lot of pent up SOTA energy!
My goal is to activate a total of ten this year. That may sound like a modest number, but since at this point I’m less interested in “drive-up” summits, it’s more difficult to fit SOTA summits into my schedule than, say, typical POTA/WWFF parks.
In fact, I’ve already plotted my next SOTA activation and hope to do it within the next couple of weeks. It’s also a meaningful (to me) summit.
How about you?
Are you a SOTA activator or are you planning your first SOTA activation soon? Please comment!
Last week, we had a glorious break in the weather–it felt almost spring-like.
On my way back home after visiting my parents, I decided I would take in a quick afternoon hike. I originally planned to go to one of my favorite county parks, but I also had a hankering to get on the air and that park wasn’t a part of the POTA network.
Tuttle Educational State Forest (K-4861)
I decided to stop by Tuttle Educational State Forest (K-4861) instead and make February 19, 2021 not only a hiking day, but a Parks On The Air day. Tuttle sports both excellent sites for POTA and a nice little trail system.
I decided to play radio first then go on a hike, so I pulled out an antenna that I thought would give me quick deployment and pack-up: the CHA MPAS Lite.
I also remembered that a reader recently asked if I would include the deployment of the CHA MPAS Lite in one of my real-time, real-life activation videos. So I did just that!
Deployment was quick and the mAT-705 Plus ATU did a fine job finding matches on the CHA MPAS Lite.
I started calling CQ on 40 meters and worked quite a few stations in short order. When the first batch of eight chasers was worked, I moved up to the 20 meter band and started calling CQ. My hope was that I could work at least a couple of stations on 20 meters then pack up and go for a hike.
I started calling CQ on 20 meters and was quickly rewarded six additional contacts.
Without a doubt–if this wasn’t completely obvious in my video–the highlight was working my friend John Harper (AE5X) in Texas. I’ve known John for years now and have followed his excellent blog but we’ve never managed to catch each other on the air!
Turns out, John was using his recently unboxed Icom IC-705 as well. Click here to check out his post which includes a mention of this very activation. In addition, check out his thoughts after taking the IC-705 (all amped-up with the KPA-500) on the ARRL CW contest that weekend.
Another highlight was logging CU3BL in the Azores again. To me, it’s still mind blowing that 5 watts can reach out that far. Here’s a QSOmap of the activation (click to enlarge):
In total, I logged 14 stations with 5 watts and a vertical in very short order, leaving me a full hour of hiking time! Mission accomplished!
Video
Here’s a real-time, real-life video of the entire activation:
The hike afterwards was just what the doctor ordered, too. I’ve mentioned before that my ankle has been healing nicely after twisting it badly in December. This hike was an easy one and gave me a chance to properly test my ankle before the (epic-to-me) SOTA activation I planned with my daughter, K4TLI the following week. (More on that in a future post!)
Here are a few photos from the Tuttle hike:
If you ever find yourself at Tuttle Educational State Forest doing a POTA activation, make time to take in a hike as well. It’s a gentle hike and even the long loop can be completed within an hour at a very leisurely pace.
Thanks for reading this field report and please comment with your experiences on the air and in the great outdoors!
QRP radios, product announcements, reviews, news and more. Low power amateur radio fun!
Please support QRPer by adding us to your whitelist in your ad blocker. Ads are what helps us stay online. All of our ads are ham radio related--no junk, we promise! Thank you!
On Monday, March 22, 2021, I performed three QRP field activations in one day. I started off the day with a visit to Three Top Mountain Game Land, and then headed to Mount Jefferson State Natural Area for a POTA and SOTA activation before heading to my final destination: New River State Park.
