Tag Archives: Parks On The Air (POTA)

Welcome to another Postcard Field Report!

My Postcard Field Reports are information-packed, just slightly more concise and distilled than my average field report so that I can publish them on a busy day.

T-T R4020

One of the least expensive radios I’ve ever purchased is my TEN-TEC R42020 two-band CW only radio. I believe I paid $120 for it (shipped!) a couple years ago and it sat on my shelf unnoticed for months until I took it on a POTA activation last year.

Here’s the admission: I really love this little radio!

It is not a feature-rich radio, and the sidetone sounds like a 1080s handheld arcade game, but it works a charm! The receiver and audio are fantastic and it sports two of my most useful POTA/SOTA bands: 40 and 20 meters.

What’s not to love?

POTA time!

I had an early morning doctor’s appointment on Thursday, February 23, 2023. As a little reward for doing my annual physical I decided to add a POTA activation to my morning. This was a last minute decision, so only a couple minutes before leaving the house that morning, I grabbed my TEN-TEC R4020, the Chelegance MC-750, and my Spec Ops Backpack (filled with all other field accessories), and I hit the road!

I chose the MC-750 that day because I needed an antenna that could be configured to be resonant on 40 meters since the R4020 has no internal ATU. That and I couldn’t remember if I’ve configured the MC-750 for 40 meters in the past. I know I’ve deployed the MC-750 with the 40M coil, but I think I may have used an ATU to match it.

I arrived at the Blue Ridge Parkway (K-3378 NC) mid-morning and set up in very short order. Continue reading Postcard Field Report: Cheap POTA thrills with the TEN-TEC R4020 and Chelegance MC-750 →

New Products, News, POTA, QRP, QRPer Notes, Videos

QRPer Notes: 3Y0J Presentation, BitBanger Demo, POTA Developers Live, and Georgia State Parks On The Air Event!

March 15, 2023 Thomas Witherspoon 2 Comments

Because I receive so many tips from readers here on QRPer, I wanted way to share them in a concise newsletter format. To that end, welcome to QRPer Notes, a collection of links to interesting stories and tips making waves in the world of radio!

Adrian Ciuperca (KO8SCA): 3Y0J Presentation to the Northern Illinois DX Association

Many thanks to Eric (WD8RIF) who shares this excellent presentation by Bouvet activator, Adrian (KO8SCA):

Click here to view on YouTube.

BitBanger Demo

Many thanks to Benn (AK4AV) for sharing this video demo:

Click here to view on YouTube.

Click here for the Github page and more notes/details.

Ask the POTA Developers – LIVE!

Click here to view the archived live stream on YouTube.

Georgia State Parks On The Air: April 1-2, 2023

Many thanks to Scott Wooten who shares the following announcement via YouTube:

Welcome to the Georgia State Parks on the Air event. Our goal is to have all fifty Georgia State Parks on the air in one weekend. This event is open to all licensed Amateur Radio Operators whether you live in Georgia or not.

There are two ways to participate: Activating or Hunting. Activators fall into two different categories: Single Operator or Club, and there is a special category for Georgia ARES operations.

The first annual 36 hour event kicks off on April 1, 2023 at 1200 Zulu and concludes at 2359 Zulu on April 2, 2023.

If you participate please remember this event is considered a CONTEST, so while casually operating Parks on the Air on the WARC bands is permissible, this event does not allow operations on the WARC bands.

For more information or to sign up as an activator, go to GAPARKS.org

We look forward to hearing you on the air!

Click here to view on YouTube.

Antennas, Field Reports, News, Portable, POTA, QRP, Videos

Breaking in the new Elecraft AX2 during a short POTA activation

March 13, 2023 Thomas Witherspoon 6 Comments

As I mentioned in my recent AX1 vs AX2 video and blog post, I purchased an Elecraft AX2 antenna and bi-pod in late January (note: two days before Elecraft announced their February ’23 sale price! Doh!).

I received the AX2 package a few days later and I was certainly eager to take it to the field.

My first opportunity came on Tuesday, February 14, 2023, when a short activation window opened up in the afternoon.

Zebulon B. Vance Birthplace (K-6856)

One of the first things I noticed after taking the AX2 out of the package is just how solid and compact it is. The AX1 is short, but the AX2 is a few inches shorter because the base is more compact.

Unlike the AX1, the AX2 is a mono band antenna, thus the coil only needs to accommodate one band. When you receive a new AX2, it’s configured for 20 meters out of the box, but the user can modify the coil to work anything from 20 to 6 meters.

“Resonant-ish”

Even though I mentioned this in my AX1 v AX2 article and video, I’d like to reiterate that the AX2 is nearly-resonant on 20 meters. It is not reliably resonant.

I’ve still been receiving a lot of messages from readers stating that their AX2 and AX1 are resonant on 20 meters, so they don’t pack any sort of matching device in their field kit. They simply hook the AX2 up to their little QRP radio and hop on the air.

While it’s true that these antennas may provide an acceptable SWR most of the time, you really can’t rely on a solid, reliable match as you could with an end-fed half-wave.

I’ll repeat what I mention in a previous post:

Small verticals like the AX1 and AX2, that use coils to electrically “lengthen” the antenna, have a higher Q than, say, a large aperture quarter or half wave antenna. In practical terms, this means that the window of resonance is narrow and more fickle than, for example, an end-fed half-wave.

A lot of factors can affect the SWR on higher-Q antennas like the AX1/AX2 including:

- - the type of terrain,
  - height off the ground,
  - length of counterpoise,
  - configuration of counterpoise,
  - and, most notably, the operator’s own body capacitance.

You may find that the AX2, for example, is natively resonant on 20 meters at one location, but isn’t at another location. This is quite normal. It’s also the reason why Elecraft states that both antennas are designed to be used with an ATU.

So there you go! If I hook up my AX1 or AX2 to a radio, I’ll always have some means of matching the impedance–either an external ATU, or a capacity hat. You can also tinker with the length of the telescoping whip and counterpoise to tweak the match.

The important part–especially if pairing these antennas with a radio that lacks both an internal ATU and SWR meter (say, the MTR-3B, G106, or TR-35)–is that you’ve some means to check the SWR before conducting a long activation session. Continue reading Breaking in the new Elecraft AX2 during a short POTA activation →

Field Reports, Morse Code, News, Portable, POTA, QRP, QRP Radios

Field Report: More Xiegu G106 POTA time and I rope in Brooks to log!

March 10, 2023 Thomas Witherspoon 5 Comments

On Friday, February 10, 2023, I had a hankering to fit in a POTA activation that morning. South Mountains State Park was an easy detour on my drive back to the QTH, so I scheduled an activation.

I’d also been meaning to meet up with Brooks (KO4QCC). Brooks started his POTA journey not even one year ago–here’s a field report from his first SSB POTA activation.

Brooks has been steadily working on his CW skills and is dangerously close to doing his first CW activation. We’ve managed to set up one late evening casual CW rag chew and I think his CW chops are very good. We plan to do more evening rag chews when our schedules align. He’s made amazing progress.

I contacted Brooks that Friday morning and he was game to meet up and do some POTA. He wasn’t quite ready to do a CW activation, so I suggested he log for me using the HAMRS app on my iPhone. I find that logging for CW ops during past Field Days really helped build my own confidence before I started using CW daily.

Brooks was 100% game to log for me.

And let me just say what a luxury it is to have someone log to HAMRS for me on my iPhone! It frees up my brain to simply log on paper (which I always do) and enjoy working stations without the extra busy work! Hat tip to good ole’ Brooks.

South Mountains State Park (K-2753)

I arrived at South Mountains State Park (the Clear Creek Access), put on my hiking boots, then Brooks pulled into the parking lot only a few minutes later.

We agreed in advance to fit in a quick hike up the Clear Creek Trail prior to the activation. I, for one, really needed to stretch my legs!

After the hike, I grabbed some gear from the car and we set up at the one picnic table at the Clear Creek Access.

Brooks and I both had commitments that day so could only play radio for 45-60 minutes max including set-up and take-down.

I deployed the same antenna I’d used the previous day: MW0SAW’s homebrew EFHW on a SOTAbeams winder.

Deployment didn’t take long–since the 40M EFHW is resonant on both 20 and 40 meters, there was no need for an external ATU. I powered the G106 with a 3Ah LiFePo4 battery via my Ham Radio Workbench DC Distribution Panel. Continue reading Field Report: More Xiegu G106 POTA time and I rope in Brooks to log! →

Field Reports, Morse Code, News, Portable, POTA, QRP

Giving the Xiegu G106 a thorough workout at Fort Dobbs!

March 6, 2023 Thomas Witherspoon 7 Comments

On Thursday, February 9, 2023, a rare opportunity opened up for me: a 3.5 hour activation window–!

I was visiting and helping my parents in Catawba County, NC, so considered the park options, almost all of which are within a 35-45 minute drive.

I thought about fitting in two shorter park activations that day, but it has been so long since I’ve had the opportunity to simply hang at one park and play radio for more than an hour, I chose the extended activation option.

Although the forecast was for clear skies that day, a front was moving through that afternoon and the skies were overcast with gusty winds. I could tell rain was a very real possibility, so I chose a site with a picnic shelter to make things a bit easier.

Fort Dobbs State Historic Site (K-6839)

Fort Dobbs was a no-brainer: not only was it the closest park (thus less travel time eating into my on-air time), but the staff there are very POTA-friendly, the site is quiet, and they have an excellent shelter that I suspected (due to the dodgy weather) would be unoccupied.

When I arrived on-site, I checked in at the visitor’s center to make sure the picnic shelter hadn’t been reserved. Fortunately, they said I could have the shelter all to myself!

I had a number of radios in my car and decided en route that I would use the Xiegu G106 once again.

I packed the G106 in a waterproof Husky radio gear box I keep in my car trunk/boot. I grabbed it and my Spec-Ops EDC pack and carried it to the picnic shelter.

My plan was to pair the G106 with MW0SAW’s 40 meter EFHW antenna.

This would give me two resonant bands (40 and 20 meters) so there’d be no need to connect an external ATU. Continue reading Giving the Xiegu G106 a thorough workout at Fort Dobbs! →

Antennas, Field Reports, Morse Code, News, Portable, POTA, QRP, Stealth

Lunch Box POTA: Pairing the Elecraft AX1 with the Penntek TR-45L!

March 3, 2023 Thomas Witherspoon 14 Comments

As I mentioned in previous posts, I’ve been using the Elecraft AX1 in heavy rotation this year. I made a commitment to myself to do a string of activations with it in January and February and also pair it with a wide variety of radios beyond the Elecraft KX2 and KX3. So far, I’ve paired the AX1 with the:

In truth, the AX1 can be paired with any radio when you use a tripod mount.

It’s a bit trickier when connecting the AX1 directly to a radio and using the Bipod as a support because 1.) the antenna connector on the radio mustn’t be too high off of the surface, 2.) there needs to be enough clearance on the back of the radio to accommodate the bipod legs and 3.) ideally, it’s nice to have a ground point on the radio, else you’ll need to clamp the counterpoise to the shield of the BNC connector.

In addition, if your radio doesn’t have a built-in ATU of some sort, then you’ll also need a capacity hat or external ATU to finish off the impedance match. (For more notes about the AX1 and AX2, check out this previous post.)

Of course, you don’t have to use Elecraft’s bipod to support the AX1 when directly connected to a radio–you can build or 3D print your own support–but the bipod is really convenient when it does work.

Objective: Lunch Box Radio

One radio I’ve been eager to pair with the AX1 is the Penntek TR-45L.

Why? Because I love the form-factor.

Something about having a lunch box-sized radio sitting on a table with a telescoping whip protruding out the back and, with that combo, the potential of making contacts all over the globe. Continue reading Lunch Box POTA: Pairing the Elecraft AX1 with the Penntek TR-45L! →

Field Reports, Morse Code, News, Portable, POTA, QRP, Videos

Gazebo Portable! A quick hike and speedy QRP POTA activation with the Elecraft KX2 and a 28.5′ random wire

February 27, 2023 Thomas Witherspoon 6 Comments

On the morning of Friday, February 3, 2023, I wanted to fit in a quick hike and activation as I made my way back to the QTH. Tuttle Educational State Forest (K-4861) is my go-to when I want to hike and play radio but don’t have enough time to fit in a proper SOTA activation.

That morning, the park was very quiet–mine was the only car in the parking lot. This being an educational state forest, they tend to get large groups of visitors all at once (typically, bus loads of school kids). In the winter, however, the park is quiet because their restroom facilities and water points are all winterized.

I grabbed my SOTA pack–which contained my Elecraft KX2 field kit, Tufteln/N0RNM folding knee board, and a throw line–then hit the trails!

Although it was a windy day, I headed to the gazebo at Tuttle (one I’ve used for activations in the past) which is on a hill and has a brilliant view of Grandfather Mountain.

Trust me, Grandfather Mountain is out there, my iPhone just can’t easily capture it:

The only issue with the gazebo is that the trees behind it are short and very dense with branches. In the past, I’ve launched a line over the top of the tree, but it’s not easy because then there’s always the possibility your throw weight will land on the roof of the gazebo. You also need a 10oz or heavier throw weight on trees like this, else risk getting your line caught in the tree.

There are a number of pines immediately behind the smaller ornamental trees, but to get to those, I’d need to lay my feedline across a service road the park staff use regularly, so that’s a no-go. Continue reading Gazebo Portable! A quick hike and speedy QRP POTA activation with the Elecraft KX2 and a 28.5′ random wire →

Antennas, Field Reports, Morse Code, News, Portable, POTA, QRP, QRP Radios

Pairing the Elecraft K2 with the AX1 at Tuttle for some QRP P2P DX!

February 24, 2023 Thomas Witherspoon 10 Comments

If you recall from my last field report, I’ve been pairing the Elecraft AX1 antenna with a number of radios. For me, it’s been a fun exercise because I always enjoy seeing what sort of results the AX1 might produce. So far, it has never disappointed.

On Thursday, February 2, 2023, I packed two radios in my car with the idea of fitting in two consecutive park activations.

At my first activation of the day–Lake James State Park–I paired the AX1 with my Mission RGO One transceiver. The activation was a blast! Not only did I stay busy working stations, but I also managed a little QRP DX thanks to a hunter from Italy.

K2 and AX1 Under Shelter

After grabbing a curried chicken salad wrap at Food Matters and a coffee at Little Guatemala roasters in Morganton, I hit my second and final park of the day: Tuttle Educational State Forest (K-4861). It was rainy, so the park was empty which allowed me to take over the very large picnic shelter at Tuttle.

Even though this particular shelter is in a bit of a dip in the land and has a large metal roof, I’ve had successful activations there in the past employing the AX1 antenna.

My hope was that history would repeat itself!

Setting Up

Attaching the AX1 antenna to the back of the Elecraft K2 was not complicated because the K2 has a BNC connector with nothing protruding to get in the way of the Bipod. Continue reading Pairing the Elecraft K2 with the AX1 at Tuttle for some QRP P2P DX! →

Accessories, Antennas, Articles, Digital Modes, Field Reports, Guest Posts, News, Portable, POTA, QRP

Elecraft AX1 Test Using American Radio Supply AM-801 Window Mount

February 23, 2023 Thomas Witherspoon 11 Comments

Many thanks to Conrad (N2YCH) who shares the following field report:

AX1 Test using American Radio Supply AM-801 Window Mount: POTA Activation at Stuart B. McKinney Wildlife Refuge, K-0228

February 19, 2023

By: Conrad Trautmann (N2YCH)

If you’ve been reading the posts here on QRPer.com lately, you probably already know that the Elecraft AX1 has proven to be an excellent antenna for POTA activations for CW, SSB and Digital modes.

Personally, I used it for a New York City POTA rove I did at the end of 2022 and was able to activate four parks in one day all over Manhattan.

Recently, Alan, W2AEW contributed a story to QRPer.com detailing how he used a window bracket he constructed with an AX1 to do a CW park activation from his car. I’ve actually done a few digital activations from the car using the AX1, however, I used the tripod with the Elecraft tripod adapter and ran coax to it out the window and draped the counterpoise down the hood or trunk. This has worked well except for windy days where it would blow over. I was intrigued by the possibility of using the window mount and a number of the commenters to Alan’s post suggested sources for these types of mounts. I ended up ordering an AM-801 from American Radio Supply.

https://www.americanradiosupply.com/am-801-window-antenna-mount-bnc-connectors/

Since the AX1 depends on a counterpoise wire to operate properly, the first thing I did after receiving the AM-801 mount was to drill a hole in the base for a screw and a wing nut. The base is painted black, so I got my continuity meter out to double check that the screw was making a good ground, which it was. I had to bend the mount up slightly for the antenna to be vertical, since my Jeep windows don’t have much of an angle to them. I’m sure it would be just right for most cars.

My next step was to give it a try. Continue reading Elecraft AX1 Test Using American Radio Supply AM-801 Window Mount →

Antennas, Field Reports, Morse Code, News, Portable, POTA, QRP

Postcard Field Report: Pairing the Mission RGO One with the Elecraft AX1 at Lake James for some QRP DX

February 20, 2023 Thomas Witherspoon 12 Comments

Welcome to my first Postcard Field Report!

If you’ve been following QRPer.com and my YouTube channel for long, you’ll notice that I typically post two field reports with videos per week when my free time allows. Each report takes about four hours to produce along with a video. I’ve currently got a small backlog of videos I need to post, so in order to squeeze them into my schedule, I’m going to use a slightly more abbreviated field report format: a “postcard” format!

My Postcard Field Reports will still be information-packed, just slightly more concise and distilled than my average field report. I’ll primarily post these for sites I visit frequently.

Speaking of which….

Lake James State Park (K-2739)

Thursday, February 2, 2023, was a rainy, dreary day so the perfect time to play a little POTA, right? I made time in my morning to visit Lake James State Park (K-2739).

When I arrived at the Catawba River Access, the parking lot was empty. Not too surprising considering it was a Thursday morning on a chilly, rainy day.