Tag Archives: Parks On The Air (POTA)

Roadside POTA: Pedestrian Mobile with the Elecraft KH1 at Lewis Ocean Bay Heritage Preserve WMA

My family decided to take a short pre-Christmas break on the coast of South Carolina in mid-December.

It had been a hectic month, so we looked at our healthy hotel points balance and decided to burn up a few of those on an impromptu four-night getaway.

We decided to stay at the same Myrtle Beach hotel where I stayed only a couple of months prior to attend a family funeral in Georgetown, SC. You might recall my activations at Lee State Park, Myrtle Beach State Park, and Huntington Beach State Park during that particular trip.

In truth, we’re not big fans of Myrtle Beach—we prefer more secluded, less commercial spots along the coastal Carolinas. In the summer, Myrtle Beach is jam-packed with visitors—the traffic is a little insane—but in the winter, Myrtle Beach is relatively quiet. Getting around is a breeze, and accommodation is easy to find.

This trip was all about family time, so I didn’t pre-plan a single activation, and I didn’t pack several radios. In fact, the only radio I brought was my Elecraft KH1, which lives in my everyday carry backpack.

The KH1 is a constant companion these days. It was really fun to take it on one of the balconies of our room and hunt parks and summits. Despite a little QRM, I was able to make a number of contacts just using the KH1 whip and dangling the counterpoise.

I remember working my friend Alan (W2AEW) while he was activating a park in New Jersey. I sent him the photo above. What fun!

Lewis Ocean Bay Heritage Preserve Wildlife Management Area (K-3903)

On Wednesday, December 20, 2023, we decided to spend part of the morning and afternoon in Conway, South Carolina, which is about a 30-minute drive from Myrtle Beach.

My wife asked, “Surely, there’s a park you can activate along the way?” (She and my daughters fully support my POTA addiction.)

After a quick glance at the POTA Map, I determined that indeed there was!

Lewis Ocean Bay Heritage Preserve WMA was essentially on the way to Conway, and I could tell based on a quick Google Map search that one of the access points (a huge gravel parking lot) was conveniently located next to the highway. Score!

I grabbed my backpack and camera (of course I brought along the camera just in case!). We drove 25 minutes to the access point which was easy to find.

As luck would have it, as I parked, I noticed that a motor grader was resurfacing part of the parking lot and the main WMA access road. This wouldn’t affect my activation, of course, but it was incredibly loud—especially the constant back-up alert.

So that my KH1 audio would be audible over the grader noise and the highway noise, I connected it to my Zoom H1N recorder.

Setup was quick despite setting up the audio feed and arranging the camera position under the shade the open hatch of my Subaru provided.

Gear

Note: All Amazon, CW Morse, ABR, Chelegance, eBay, and Radioddity links are affiliate links that support QRPer.com at no cost to you.

On The Air

I started calling CQ POTA on the 20 meter band and it didn’t take long before hunters started calling back. Continue reading Roadside POTA: Pedestrian Mobile with the Elecraft KH1 at Lewis Ocean Bay Heritage Preserve WMA

The Georgia Wildlife Management Areas Continue to Deliver

After my last activation at Oliver Bridge Wildlife Management Area (K-3764), I considered heading to South Carolina for park #16 toward my 2024 goal of 60 new-to-me parks. However, after looking at the weather forecast, I reconsidered. I’d need to activate earlier in the day due to my schedule and, given the chilly weather, I’d prefer to sit in the car for the activation. That would not be a good option for the park I considered.

So, I began looking at more wildlife management (WMA) areas in Georgia not far from home. I chose Hiltonia WMA (K-8794) which is an hour’s drive for me. This WMA is 500 acres mostly of hardwood and long-leaf pines and is owned by the State of Georgia. The property offers hunting of deer, turkey, dove, and small game.

I did not know before my visit that longleaf pines existed on the property but figured it out when I discovered their needles while walking with Daisy after the activation. You know longleaf pine needles when you see them because they are much longer than other pine needles. In fact, they have the longest needles of the eastern pine species and can grow up to 18”. The needles I found were 14” in length!

Longleaf pine forests are special because they are rich in bio-diversity and provide habitat for the threatened gopher tortoise, a keystone species because it provides burrows in which other species, like the threatened Indigo snake, live or shelter. The endangered red-cockaded woodpecker is another species that benefits from longleaf pine forests because it lives in the cavities of mature longleaf pine trees. The species dwindled when many of the old-growth longleaf pine forests were felled and/or replaced with commercial forests of loblolly or slash pine in the southeastern US.

Gopher Tortoise. Source: https://www.aces.edu/blog/topics/forestry-wildlife/celebrating-the-gopher-tortoise/
Indigo Snake. Source: https://www.oriannesociety.org/priority-species/eastern-indigo-snake/?v=400b9db48e62
Red-cockaded woodpecker. Source: https://ebird.org/species/recwoo

You access the Hiltonia WMA via a dirt road in the middle of nowhere. The property has an information kiosk right near the entrance with a map giving you the lay of the land. I usually look at whatever maps are available online from the state of Georgia or Google beforehand. For Google maps, I usually use the topographic layer as this is the default and shows me roads to access the property. But before this trip, I played with the layers setting and discovered the imagery layer will give me a better idea of what is forested and not. Hence I could easily locate an open area to set up my antenna.

The dirt road to the park
https://gadnrwrd.maps.arcgis.com/
Google Maps – imagery view

Just past the information kiosk is a dove field and it was there my Subaru Crosstrek Kai and I set up shop. What a gorgeous day! Crisp air under clear, blue skies. Daisy explored and sniffed to her heart’s content while I installed the Tufteln EFRW antenna in the perfect pine with one toss!

The perfect pine tree!

It was not long before Daisy and I were installed in Kai and ready to get the party started. And what a party it turned out to be! Not long after I called CQ on 20 meters, Joseph KB1WCK responded. After we finished our QSO, I was buried under a massive pile-up. However, pile-ups do not intimidate this POTA Babe! I did the best I could to pick up bits and pieces and work through it. Did I make mistakes? Sure I did, but there are no CW police and this is how we learn, through challenges. Continue reading The Georgia Wildlife Management Areas Continue to Deliver

Pairing the KX2 & AX1 for my first POTA activation in weeks!

On Thursday, February 1, 2024, I managed my first POTA activation in weeks.

As I mentioned here on QRPer, January was a crazy month. Not only did I lack the time to activate parks, but I also wasn’t in the right frame of mind to make activation videos.

However, on February 1, things were looking up, and a nice little POTA activation was just what the doctor ordered!

I grabbed my KX2/AX1 pack as I headed out the door.

On the way into Asheville, I stopped by the Folk Art Center on the Blue Ridge Parkway (K-3378)–my go-to site for convenient activations. I had a one-hour window of time to fit in an activation.

BRP & MST Two-Fer

You might recall that in my last field report (from January 5, 2024), Hazel and I hiked the Mountains-to-Sea Trail (K-8313) and found a trailside spot that was also within the Blue Ridge Parkway (K-3378) property boundary. The activation counted as a two-fer!

You don’t have to hike the Mountains-to-Sea Trail (MST), however, in order to activate it and the parkway at the same time.

In the activation video, below, I show where one of the picnic tables at the Folk Art Center is close enough to where the MST passes that it counts. Makes for an easy drive-up, two-fer activation.

New Tufteln Cover!

A few weeks ago, my friend Joshua (N5FY) sent me a new protective cover for my Elecraft KX2. He’s now made these covers a part of his product line at Tufteln.com.

Like my Tufteln KX1 cover, the KX2 cover locks onto the front of the radio with rare earth magnets. It only requires that you replace the stock screws around the KX2 display with the ones Joshua provides. His replacement screws have a slightly higher profile, which allows the cover to attach magnetically.

What I love about Joshua’s covers is that they do a brilliant job of protecting all of the controls of the KX2 without taking up as much space as, say, the stock clear cover that came with my side panels.

Also, it fits the KX2 perfectly whether you have side panels or not!

Setting up

Of course, the glory of the KX2/AX1 combo is that it takes almost no time to set up in the field.

Within a minute or two, my gear was deployed, and I was on the air seeking a clear frequency.

I opted to use my Begali Traveler (over my KXPD2) key since it was also packed in my GoRuck GR1.

Gear:

Note: All Amazon, CW Morse, ABR, Chelegance, eBay, and Radioddity links are affiliate links that support QRPer.com at no cost to you.

On The Air

On this occasion, I decided to work the lower bands of the Elecraft AX1 antenna.

I started calling CQ POTA on 40 meters and, fortunately, the band was alive. Continue reading Pairing the KX2 & AX1 for my first POTA activation in weeks!

Building Positive Park Relations: Elevating Our Role as POTA Activators

Our Parks On The Air (POTA) community has experienced exponential growth since my introduction to POTA activations in 2019. Today, POTA boasts over 500,000 participants, including both hunters and activators.

Gone are the days of awkwardly explaining our hobby to park staff who were unfamiliar with amateur radio, let alone park activations. Nowadays, when I approach park staff for permission to operate, they often direct me to areas where other POTA activators have set up in the past, showcasing a growing acceptance and understanding of our community.

Goal: Positive Impact

With such a large and expanding community, we have the potential to significantly impact our park systems positively. It is crucial for POTA activators to not only leave a positive impression with park staff but also actively support and contribute to the well-being of our parks.

Why now?

This post has been sitting in my drafts folder for several months. I hesitated to publish it because of my inclination towards positivity and reluctance to dwell on the negatives.

However, recent conversations with park rangers and staff from three different sites between June and November last year prompted me to share these insights. While acknowledging that interactions with POTA activators are generally positive, all three shared some concerns and criticisms.

I was surprised, in one case, that they hadn’t banned POTA activators from their site entirely. (I detail two examples at the end of this article.)

I imagine each and every one of these park rangers has had more negative interactions with the general public, but we POTA activators and amateur radio operators are a cohesive community that they lump into one group for better or for worse.

For instance, while a rowdy family gathering might disrupt the peace in a park, it doesn’t lead to a ban on families. However, repeated negative interactions involving POTA activators could result in our exclusion from parks or even escalation to wider park networks since many individual parks are tied to state, provincial, or national park systems.

Indeed, this has already happened at National Wildlife Refuges in Virginia. Check out the following message posted to Facebook this week from John (AB0O) who is a US mapping volunteer for POTA:

Time to be a positive force!

As John states in his message above, it’s time for us to proactively become ambassadors for POTA and good stewards of our parks and public lands.

I could have easily titled this post, “Ask not what your park can do for you; ask what you can do for your park!”

Let’s delve into some simple suggestions that I personally follow. This list is not exhaustive, so I invite you to share your strategies for promoting POTA positively in the comments below.

1. Obtain permission before operating

Despite the temptation to activate first and ask questions later, it’s essential to seek permission before setting up your station in a park. Some parks may require written permission for activations, regardless of the setup’s profile or impact (remember Leo’s recent field report?).

While most POTA sites allow activations as long as park rules are followed and other visitors aren’t disturbed, it’s prudent to confirm with park staff or experienced activators when in doubt.

In my experience, asking for permission is particularly crucial in parks with historical or ecological significance and limited facilities.

A piece of advice: When seeking permission, showcase your most portable, low-profile radio gear to help park staff understand the minimal impact of your setup. Over the years, this approach has resulted in successful activations for me, with only one instance of declined permission, primarily due to supervisor unavailability.

2. Choose inconspicuous locations

At the Cape Hatteras Lighthouse, I received permission to operate and I set up my station well outside the viewshed of the lighthouse.

When setting up your station, avoid obstructing viewsheds or high-traffic areas within the park. Instead, opt for spots away from major attractions or foot traffic, ensuring minimal disruption to other visitors’ experiences.

Most POTA sites offer designated picnic or parking areas that are suitable for activations without interfering with scenic views. When uncertain, seek guidance from park staff to identify suitable locations.

3. Default to low-impact, low-profile gear

Unless you know in advance that a park allows wires in trees, stakes in the ground, or other antenna support structures, default to your most portable, low-profile, low-impact field setup.

Unless explicitly permitted, refrain from deploying antennas in trees or using stakes that could damage park grounds.

I believe every POTA activator should possess a compact, self-supporting antenna system to minimize environmental impact. Additionally, consider operating from your vehicle if uncertain about setup requirements.

An NC State Park ranger told me last fall, “I like to see POTA activators that aren’t taking up a lot of space and yelling at their radio.

Let’s not be the guy or gal he described!

4. Leave No Trace

Adhering to the principles of Leave No Trace is paramount during POTA activations and other outdoor adventures. Always dispose of trash properly and, if at all possible, pick up any litter you encounter at your operating site. My goal is to always leave the site cleaner and tidier than I found it.

In my backpack and car, I keep small litter bags along with nitrile gloves so that I can pick up and dispose of any trash I find.

Over the years I’ve operated POTA, park rangers and game wardens have caught me in the act of collecting trash and thanked me. I made a point of telling them that I’m an amateur radio operator doing a POTA activation. I feel like this can only leave a positive impression in their minds and help future activators who might seek permission to operate at a particular site.

Want to go a step further?  Consider organizing group clean-up events with your amateur radio club. This collaborative effort not only benefits the park but also strengthens park and community ties.

5. Support your park financially

Show your appreciation for park access by contributing financially, especially at smaller locations with visitor centers or donation boxes. Whether purchasing items from the gift shop or making direct donations, your support is invaluable in maintaining park facilities and programs.

For instance, during a recent visit to a historic site, I made a point to purchase items from the gift shop and donate to the park.

The park rangers thanked me and noted that another frequent POTA activator also donates a bit of money or buys something in the shop each time he visits.  They pointed out how much they appreciate that type of support.

While I usually prefer inconspicuous contributions, I intentionally inform park staff of my status as a POTA activator during these interactions. This transparency reinforces the positive image of amateur radio operators as park supporters.

6. Respect park operating hours

Ensure that your activations align with park operating hours to avoid overstaying your welcome. Familiarize yourself with park schedules and plan your activities accordingly to minimize disruptions and inconvenience to park staff.

I learned this lesson firsthand during an activation at Lake Norman State Park in 2021, where I unintentionally extended my stay past park closing hours. This happened during the week they shifted from more liberal summer hours, to winter hours. I was apologetic to park staff. Since then, I make a conscious effort to wrap up my activities well before closing time and communicate my intentions with park staff if I feel like I might cut it a bit close.

Be a POTA Ambassador

Vlado (N3CZ) draws a crowd on the Blue Ridge Parkway.

By following basic guidelines like these, POTA activators can cultivate positive relationships with park staff and demonstrate our commitment to responsible outdoor recreation.

As POTA Ambassadors, let’s engage with park staff, address any concerns they may have, and showcase the respectful conduct of our community. Listening to their feedback and acknowledging past issues can help mitigate negative perceptions and foster mutual understanding.

Real-word example

During a visit to a new-to-me urban park last year, I proactively sought permission to operate, considering the site’s limited space and popularity among POTA activators. Park staff appreciated my courtesy and expressed gratitude for my considerate approach.

Our conversation revealed previous negative experiences involving POTA activators. These included instances where operators failed to comply with park rules and even exhibited disruptive behavior. For example:

  • One operator tried to set up an antenna by tying a short 2×4 to fishing line and attempting to throw it into a tree. However, this park prohibits the use of trees for antenna support, and his “method” was causing damage to small branches. When asked to refrain from using the tree, the operator became confrontational, insisting on his ‘legal right’ to do so. Despite the staff’s polite explanation of the park rules, the operator angrily packed up and left.
  • Another incident involved a mobile activator who parked his truck in the park’s small lot, occupying three parking spaces, while deploying a hitch-mounted vertical. With a public event underway and all parking spaces occupied, park guests raised complaints. Despite staff requests to reposition his truck to free up space, the activator responded angrily, rolled up his window, operated for a few minutes, and then departed.

Despite these incidents, the staff emphasized that they were exceptions rather than the rule. They mentioned several regular activators whom they enjoy interacting with during their visits. Undoubtedly, these individuals serve as POTA ambassadors, exemplifying our community’s respect for parks and public lands.

Privilege and Responsibility

Wiseman’s View in Pisgah National Forest (K-4510)

While our tax dollars support public lands, park staff retain the authority to regulate activities that may impact park ecosystems or visitor experiences.

The recent notice regarding National Wildlife Refuges in Virginia serves as a reminder of this privilege and responsibility.

Let’s strive to represent POTA activators positively and proactively contribute to our parks’ well-being. Together, we can ensure that future generations continue to enjoy the beauty and tranquility of our public lands.

What are your strategies? Please share your tips and advice in the comments section!

Exploring the Mountains-to-Sea Trail: QRP POTA with Hazel and a New KX1 Kneeboard!

On Friday, January 5, 2024, I looked at Hazel and could tell that, despite the chilly temps, she wanted to go on a late afternoon hike. I did, too, for that matter and why not combine the hike with a POTA activation?

In addition, we were expecting a winter storm to move in that night, so hitting the trail in advance of the snow and ice seemed to make sense.

Before I could get my boots on, Hazel was waiting by the car door to jump in.

Mountains-to-Sea State Trail (K-8313)

One of the closest long trails near my QTH is the Mountains-to-Sea Trail (MST).

At 1175 miles long, the MST stretches from the Outer Banks of North Carolina to the Great Smoky Mountains (see map above).

I can actually hike to the MST from my QTH, but it takes a good hour and half to do so. It’s much easier to drive to one of the numerous nearby trailheads, and that’s exactly what Hazel and I did. I drove to one of my favorite Blue Ridge Parkway POTA spots where a short manway connects to the MST.

Hazel was so excited to hit the trail. (I was, too.)

At the end of the day (because, it was nearing the end of the day) we couldn’t hike for long if I planned to also complete a POTA activation. Sunset was at 5:29 PM local and I didn’t want to pack up and hike back in the dark.

That said, if I needed to hike back in the dark, I could have because I never go on a POTA or SOTA activation without a fully-charged headlamp. FYI: I was packing a NiteCore NU25 (affiliate link).

I started my action camera and captured the last bit of hike before Hazel and I found a great spot to set up. There were enough trees around to deploy a 40 meter EFHW and a relatively flat spot to set up my Helinox chair and KX1 station.

Since much of this section of the MST is on the Blue Ridge Parkway grounds, I checked quickly to make sure my operating site would qualify as a two-fer with K-3378.

I opened the Parceled App on my iPhone to confirm that my site was indeed on Blue Ridge Parkway property..

A KX1 Kneeboard!

If I’m being perfectly honest, I had an ulterior motive with this trailside activation: I was eager to finally put my new KX1 kneeboard into use! Continue reading Exploring the Mountains-to-Sea Trail: QRP POTA with Hazel and a New KX1 Kneeboard!

Matt’s Weekend POTA Roundup!

Many thanks to Matt (W6CSN) who shares the following post from his blog at W6CSN.Blog:


Weekend POTA Roundup

by Matt (W6CSN)

It’s been a stormy past several days here in Northern California, but if anything, the weather only amplifies my motivation to go outside and get on the air.

Rather than do a separate writeup for each, this post is a roundup of my last four POTA activations, from Friday, February 2nd through Sunday, the 4th.

A faint rainbow splashes down in front of Angel Island

Thursday and Friday had been wet, with one storm in a series moving across the Bay Area. However, by Friday evening the cold front had passed and there was a break in the rain. This was a perfect opportunity to try an after work activation at the Presidio of SF (K-7889).

I hadn’t used the QCX-Mini in a while, and this activation reminded me why. I believe what is happening is that being so close to the antenna, RF interference causes clicking while keying, nearly to the point of distraction. I need to experiment with RF chokes on the key and audio lines to see if that improves the situation.

Fed up with the RFI on the QCX-Mini, I switched over to the MTR-4B which doesn’t seem to suffer the same issue. I wrapped up the activation after netting 21 QSOs in the cold west wind.

All QSO maps in this post are from http://tools.adventureradio.de/analyzer/

The next bout of rain wasn’t due to arrive until later Saturday afternoon. This was a change in the forecast that subsequently altered my plan to stay in Saturday soldering on my QMX Hi-Bander project.

Initially I went to Fort Point (K-0819) in the hopes of changing it up from my usual activation park but there were just too many people there. So seeking relief from crowds, I crossed the Golden Gate Bridge and went up on the slopes of Mt. Tamalpais.

I parked at Trojan Point at an elevation of approximately 1800 feet. See this post for more views from this location. The temperature was in the mid-40s, which is cold for us coastal Californians. Besides, the winds were picking up ahead of the next storm so I operated from the comfort of my vehicle using the Gabil 7350T base loaded vertical antenna on 15m and 20m.

This activation used the FT-818 and yielded 23 contacts, including JH1MXV from northwest of Tokyo, Japan coming in fairly strong on 21 MHz.

Driving back to San Francisco takes me right through the Presidio of SF (K-7889) and noticing that it was after 00:00 UTC, I made the last second decision to divert to East Beach to see if I could work in another activation before the anticipated rain.

At my usual spot for activating this park, it took only moments to raise the MFJ-1979 20m quarter wave and do a quick deployment of the MTR-4B on the trunk of the car. The wind was picking up, but not nearly as strong as it was up on the mountain.

After seven QSOs, the skies began spitting raindrops, this was going to be close! I closed the cover of the Maxpedition pouch to protect the radio and battery while the Bencher paddles could tolerate a little bit of moisture.

I was happy to have a Rite-In-The-Rain notepad for logging [Amazon affiliate link], because now I was certainly writing in the rain! Three more contacts and the activation was concluded with a hunt of Jim, WB0RLJ, in K-4011. Continue reading Matt’s Weekend POTA Roundup!

For Conrad, DC Travel = DC POTA!

Washington, DC Field Report

By: Conrad Trautmann, N2YCH

January 30, 2024

Periodically, I travel to Washington, DC for my job. On my latest trip, I carved out some time to activate some parks. The hotel I was staying at is just a few minutes away from the National Mall, which provides many activation options on the POTA website. After scoping it out on Google Earth and researching trails using the National Parks mobile app and web sites, I settled on the Jefferson Memorial, K-0792 as my first stop which is a two-fer with the National Mall, K-0655.

Photo of Jefferson Memorial

Just steps away is the George Mason Memorial where the Potomac Heritage Trail National Scenic Trail, K-4564 passes right through and is located along the East bank of the Lower Potomac River. The Captain John Smith Chesapeake National Historic Trail, K-4567 runs by as well. The bench I found on the shore of the river met the minimum 100’ rule for both trails and was also located in the National Mall park, so this location was a three-fer.

Photo of George Mason Memorial
View of the Potomac River
Bench along walking path near George Mason Memorial

I tried to travel as light as possible this trip. The gear I chose to bring was the Elecraft KX2 along with the AX1 antenna and my laptop with the USB sound card and CIV cable.

Samsung laptop with Electraft KX2 and AX1 antenna

The January winter weather was mild, in the low 40’s F so setting up and activating outside wasn’t a problem. With it being off season for tourists, I had the park almost all to myself.  There were signs posted at the memorial asking visitors to be quiet and respectful, so the last thing I wanted to do was set up on the steps and draw attention to myself. I found a wall near the Tidal Basin’s water’s edge and was able to set up out of the way of anyone wanting to photograph the memorial, but still be on the property. Continue reading For Conrad, DC Travel = DC POTA!

Late-Shift 80 Meter Activation Tonight

I normally don’t announce activations on QRPer, but tonight I plan to activate a two-fer of Pisgah National Forest (K-4510) and Pisgah Game Land (K-6937) starting roughly around the turn of the UTC day (19:00 EST tonight, or 00:00 UTC on Februay 7, 2024).

I’ll be testing an 80 meter coil for the Chelegance MC-750 vertical.

I’m announcing this POTA activation becase a number of you who live way too close for a 40 meter and up contact have asked me to post if I plan a late night activation on 80 meters.

I hope to put you in the logs!

Cheers,

Thomas (K4SWL)

A Hasty Activation in Georgia

by Teri (KO4WFP)

As many of you know, my personal life has been tumultuous these past five months. I thought maybe it would settle down after the first of this year but no such luck. My son and I moved into a townhouse the third week of January. While I appreciate my parents upending their lives to accommodate the two of us during my divorce, there were too many people in too small of a house with too much stuff. Also, my son needed a room of his own which he didn’t have at their place.

Moves are never convenient and this one was no exception. I needed to be packing the Sunday prior to my early Monday morning move. However, I had already committed to and scheduled an activation at Oliver Bridge Wildlife Management Area (K-3764). The weekend of January 20th and 21st was the winter Support Your Parks weekend and, as a POTA Babe, there was no way I would miss the event!

Support Your Parks information on POTA website

Thankfully, Oliver Bridge Wildlife Management Area (WMA) is only 40 minutes from my parents’ home. That meant another pleasant drive in rural Georgia on GA Route 17 through the communities of Guyton, Egypt, and Oliver.

Google Maps

This WMA consists of 1,560 acres and offers hunting for deer, small game, and turkey. Checking the Georgia Department of Natural Resources Hunting Regulations guide, the only item in season this particular weekend was small game. I would make sure to take the blaze orange vests for both Daisy and me again.

The WMA is bounded on one side by the Ogeechee River, one of the few free-flowing streams in Georgia. This blackwater river runs southeast 294 miles to empty into the Atlantic Ocean at Ossabaw Sound near Savannah. It played an important part for trade and commerce as well as was a source of freshwater and food for communities along its banks. In present day, kayaking and canoeing are popular pastimes on the river as well as fishing.

https://gisgeography.com/georgia-lakes-rivers-map/

Daisy and I arrived at the WMA a little before 11 AM. We took River Road in the park to find a place for the activation. The road was in rough condition in some spots and was another one I’d not want to drive immediately after a heavy rain. I was thankful, once again, for my four-wheel drive Subaru Crosstrek nicknamed Kai. (My family has a funny habit of naming all our cars.)

On the map, there appeared to be a clearing about two-thirds of the way down the road. Tall, skinny pine trees lined either side of the road, not great for getting an arborist line into them. Thankfully, the canopy opened up for a small clearing as I surmised from the map and it was here I decided to set up.

Because of the opening, the pine trees near the side of the road had some lower, reachable branches on them. After a few tries, I snagged the branch I wanted and began hoisting the Tufteln EFRW antenna with the arborist line.

In past activations, I would usually get the antenna up however I could. But, at this point in my POTA journey, I am beginning to think how I want the antenna oriented with propagation in mind. I wanted it to run at a diagonal – northwest to southeast. To do that, I’d have to get it across a wide ditch that was partially frozen due to the cold temps. However, if I just tossed the line across, it was light enough it would likely end up in the ditch where I couldn’t easily retrieve it. Continue reading A Hasty Activation in Georgia

Major POTA fun with the TEN-TEC R4020 and PackTenna 20M EFHW!

The other day, I was thinking…

If  2014 Thomas looked at 2024 Thomas’ QRP radio inventory, he wouldn’t believe the number of radios he’d accumulated in a mere decade.

It’s a little insane, really.

The thing is, over the years, I’ve picked up some great QRP bargains at local hamfests and via various online classifieds. While it’s not exactly “chump change,” you can often find good used QRP radios for less than $300.

Sometimes it’s hard (for me) to pass up those deals.

One such deal was a local fellow who wanted to sell his Ten-Tec R4020 a few years ago.  He listed it for $125, and there weren’t any takers for a few days. (Keep in mind, this was a wee bit before our current CW Renaissance.)

I contacted him and snapped it up. I thought the R4020 might be a fun little two-band radio for POTA and SOTA adventures.

I was right!

The R4020 is an incredibly fun radio to use in the field.

The audio is superb. It has a low noise floor, great sensitivity, and a well chosen filter width. What the R4020 lacks in features, it makes up for with audio fidelity, in my opinion.

I look forward to each and every activation with this QRP wonder.

Speaking of which…

Tuttle Educational State Forest (K-4861)

On Wednesday, January 3, 2024, I made some time in the afternoon to stop at Tuttle Educational State Forest.

I believe I was on the way back to the QTH that afternoon after an overnight with my folks in Hickory, NC.

I love Tuttle, but it had been a while since I completed an activation here. In the activation video (below) I said it had been a couple of months, but later I checked and realized it had been four months! Wow! Hard for me to believe it had been that long!

That day, the park was void of visitors. I was the only person in the parking lot. No surprise here: kids were just heading back to school after a long Christmas break, so there were no field trips on site.

Since there was no competition in the picnic area, I decided to grab a site I might not have actually used before in previous Tuttle activations. I’m evidently working on my WATPT (Worked All Tuttle Picnic Tables) award!

First, a quick inventory…

Before heading to Hickory the previous day, I grabbed the little Blue Ridge Outdoors pouch that held my R4020 and much of the supplies I’d need to get on the air.

I knew, though, that this wasn’t a fully self-contained field kit. Not yet, at least. I hoped that between my main radio gear pack and what I had in the car, I could piece together an entire station.

In my activation video, I speak to the mental checklist I use to make sure I have all of the necessary components to complete my field kit. I did this on site as I set up (typically, this is done prior to leaving the QTH).

Fortunately, I had everything I needed, including an external speaker.

Side note: Some of you might notice the (disproportionately) large Bioenno battery I used during this activation. Yes, it’s crazy overkill for this wee QRP radio. I’d normally use a 3Ah battery, but frankly, I need to exercise my 15Ah battery from time-to-time, too! It gets the least amount of field time because I normally save it for my QRO radios that I use so little in the field.

Gear:

Note: All Amazon, CW Morse, ABR, Chelegance, eBay, and Radioddity links are affiliate links that support QRPer.com at no cost to you.

On The Air

I’d packed my PackTenna Mini 20 meter EFHW with the R4020.

My 40 meter PackTenna EFHW would have been a better choice–since it would have been resonant on both of the R4020’s bands (20 and 40M)–but at the time of day I was operating, I knew 20 meters would serve me well, so 20 meters it was! Continue reading Major POTA fun with the TEN-TEC R4020 and PackTenna 20M EFHW!