Tag Archives: Morse Code

Field Reports, Guest Posts, News, Portable, QRP, SOTA, Videos

M0VKR’s Lewesdon Hill SOTA activation with the Elecraft KH1

3 Comments

Many thanks to Lee (M0VKR) who shares the following field report and video:

Activating Lewesdon Hill with the Elecraft KH1

by Lee (M0VKR)

After taking a day off from work my wife Joanne and I pondered about what we could do. “Shall we go over to Dorset to that hill you have spoken about and take your new radio?” There is no need to ask me twice to get outside and activate so we were quickly packed.

The KH1 came as the Edgewood package, so everything is contained in its own pack, ready for moments just like this. I grabbed it off the shelf in the shack, along with a KX3 as backup.

Within 10 minutes we had our labradors Toby and Konnie in the car and set off on a new CW ham radio adventure to activate Lewesdon Hill in Dorset for a SOTA activation. It was mid-morning by this point and things looked promising for a perfect day of outdoor radio operation.

With my Elecraft KH1 and KX3 as a backup snugly packed, along with my trusty home brew antennas, we embarked on the journey. The drive was scenic, with the rolling hills of the Dorset countryside providing a beautiful backdrop, Traffic was light too – Perfect.

After 45 minutes or so we arrived at the base of Lewesdon Hill. I took a moment to appreciate the tranquility of the area, breathing in the fresh air. The only downside was no nearby carpark, so we parked the car in a layby making sure it wasn’t going to be in the way of any farm traffic.

Finding the right spot to set up was the first small challenge.

Lewesdon Hill is only 279 meters (915 feet) to the summit, not exactly a mountain but it is the highest point in Dorset. We set off up the concrete driveway to a local farm, then turned right through a gateway and began ascending. The ascent is marked as a footpath and is pretty much through woodland until you get to the summit. It is a relatively steep climb, and we stopped every so often to take in the expanding view of the countryside through the trees.

Joanne had completed a 10K run a few days before so was happy to stretch her legs.

We arrived at the summit in good time. I needed a location with good elevation and a clear view to maximize my reach.

After a brief walk 1KM’ish, Joanne found the perfect spot—a clearing with a panoramic view of the surrounding area and a fallen tree which made the perfect workstation. I could already feel the anticipation building as I began unpacking my gear.

Setting up the antenna is always a mix of art and science, but mostly just plain luck. Today, I was using my favourite home brew random wire, which had served me well in previous activations. I found a stone to act as a weight and tossed the wire into a tree on the first shot and with a few quick adjustments, it was up and ready. Next came the radios.

The Elecraft KH1 and KX3 are compact yet powerful, ideal for portable operations like this. Because the KH1 had been configured already at home and previous activations, I hit the tune button. It tuned the random wire within a second or so and I double checked the keyer speed and set it to 16 WPM. Luckily, there was good phone service, so I sent out a spot on the SOTA website and I was ready to start.

The band conditions were not exactly favourable, however the clear blue skies hinted at a good run. I powered up the KH1 and began calling CQ. A station in Northern Ireland came back instantly and exploded out of the speaker, at a lovely cadence. One by one, contacts started rolling in. Each successful connection was a small victory, a testament to the power of CW communication and the effectiveness of my setup and of course the superb performance of the Elecraft KH1.

The weather was kind, with a gentle breeze keeping things cool. Throughout the activation, I logged 4 contacts, each one a story in itself. Notable among them was a contact from my good friend Steve MW0SAW from across the Bristol Channel in Wales, a testament to the reach of my modest setup. Steve and I had been in the same CWOPS class last year, so it’s always great to get him on air, even though we speak most days on the phone.

By the end of the session, I had made 4 contacts. I was really satisfied and could have sat for longer working the bands but, content, we decided to pack up and go grab some lunch from the nearby bakery in the village of Beaminster. The KH1 had performed flawlessly, and the homebrew wire antenna had once again proven its worth and overall, it had been a successful activation.

Reflecting on the day’s achievements as we hiked back down, the sun now a little higher in the sky, I couldn’t help but feel a sense of accomplishment. Having just completed a 10 week comprehensive ICR course with CW innovations and being a relatively new CW operator, I was pleased that the contacts had come back at a predictable pace. This made copying the callsigns easy. As I complete more activations, I am finding each activation is a unique experience, and today with the Elecraft KH1 was no exception. We are looking forward to the next adventure, with new challenges and new stories to tell.

Back at home, I reviewed the logs and relived the day through the video footage I had been encouraged to make by my family and friends. For those who want to see the activation in action, you can check out this video on my YouTube channel:

73 and see you on the airwaves!

Lee (M0VKR)

Readers: Would you do me a favor and subscribe to Lee’s new YouTube channel? Lee kindly shared his field report at my request and this activation video was a first for his new channel. Let’s support him by giving his video a thumbs up and subscribing! Thanks for sharing your report, Lee! -Thomas (K4SWL)

Field Reports, Morse Code, New Products, News, Portable, POTA, QRP, QRP Radios, SSB, Videos

Xiegu X6200 SSB Field Test: A Morning POTA Activation at Lake James

12 Comments

On Tuesday, June 18, 2024, I needed to make a morning trip to Hickory, NC, to take care of some family business and visit my father.

I started my day early because I also wanted to be back in the Asheville area by noon. Some quick calculations over morning coffee and I decided I had just enough time to fit in one POTA activation en route to Hickory.

I left the QTH around 7:15 AM and made my way to the Paddy’s Creek Access of Lake James State Park, arriving around 8:15 AM.

Lake James State Park (US-2739)

Two other reasons I fit in my activation en route to Hickory instead of on my way back:

  • Paddy’s Creek has a lakeside beach area that gets very busy in the summer, especially on clear, sunny days (like Tuesday).
  • Temperatures that day were forecast to push near 95F/35C.

When I arrived at the parking area, I was pleased to see I was one of the only cars there. This made it much easier to find a spot to set up!

I started my activation video (see below) then walked to a picnic table under some trees that would not only provide shade but also antenna support!

I deployed my KM4CFT end-fed half-wave kit that I cut as a 30M EFHW with a linked 40M extension. When I launched the arborist line into the dense canopy, I thought I snagged a high branch, but it turned out I hadn’t.

In the end, my 40M EFHW had more of a low inverted vee, almost NVIS-height, configuration. I was fine with that, though, knowing on the 40M band that early in the morning, I’d snag contacts in NC and the surrounding states.

My goal was to finally make some SSB contacts with the Xiegu X6200. My previous mid-day activation with the X6200 provided no results, so I was hoping I’d be more successful in the morning.

One other thing I did that I haven’t done in over four years: I started out my activation with more than 5 watts of power. I added an external battery to the X6200, turned off its internal charger, and ran the transceiver at its full output power of eight watts.

My goal was to see how warm/hot the chassis would become during the activation. This is one of the questions I’ve been asked the most about the X6200 so far.

Setting up the radio was simple. I was careful to make sure that the internal ATU was bypassed on the 40M (and later 20M) band.

Gear:

Note: All Amazon, CW Morse, ABR, Chelegance, eBay, and Radioddity links are affiliate links that support QRPer.com at no cost to you.

On The Air

One of the other reasons I chose the Paddy’s Creek access of Lake James is that I knew for sure that I had mobile phone reception there, which I would need to self-spot in SSB mode. Continue reading Xiegu X6200 SSB Field Test: A Morning POTA Activation at Lake James →

Field Reports, New Products, News, Portable, POTA, QRP, QRP Radios, SSB, Videos

Xiegu X6200: Second POTA activation with rough propagation, but CW saves the day!

4 Comments

On Tuesday, June 11, 2024, I took my production run Xiegu X6200 (on loan from Radioddity) to the Blue Ridge Parkway for its first POTA activation. The activation was a success, with good band conditions on 40 and 30 meters. You can read that field report by clicking here.

Later that day, I had a second opportunity to use the X6200. My daughters were kayaking near Lake Powhatan in Pisgah National Forest, so Hazel (my activational support animal–!) and I went for a quick POTA activation.

Pisgah National Forest (US-4510)

I usually set up near the lake at Lake Powhatan, where there are picnic tables and shade. However, mobile phone reception is poor there. Since I planned to operate in single-sideband mode, I needed a way to self-spot or have a friend spot me, thus a little mobile phone reception (else, use my Garmin In-Reach).

I decided to set up at a picnic area at the top of the hill near the main parking area for the lake/beach. I’ve never seen anyone use this site before, likely because it’s not close to the lake.

The site is surrounded by trees, making it a great spot to deploy a wire antenna.

Setting up

I used my PackTenna 9:1 UNUN random wire antenna, which was already in my pack from the morning activation. It’s a good choice for the higher bands (20 and 17M) I planned to use.

I set up the PackTenna so it wouldn’t interfere with anyone walking through the site. Hazel found a sunny spot to relax.

Gear:

Note: All Amazon, CW Morse, ABR, Chelegance, eBay, and Radioddity links are affiliate links that support QRPer.com at no cost to you.

On The Air

I began by attaching the X6200 microphone and spotting myself on the SSB portion of the 20M band. I called CQ POTA for quite a while with no response.

Once again, propagation conditions were poor. Continue reading Xiegu X6200: Second POTA activation with rough propagation, but CW saves the day! →

Field Reports, New Products, News, Portable, POTA, QRP, QRP Radios, Videos

The New Xiegu X6200: First POTA activation in CW with a production unit!

14 Comments

If you’re following the new Xiegu X6200 closely, you might recall that I took a prototype version of the radio out two weeks ago for a POTA activation. Propagation was so challenging–as in, a complete radio blackout in North America due to an X-Class flare–it took about 90 minutes of calling CQ POTA to snag the ten needed for a valid park activation.

I had planned to post the activation video on YouTube, but learned shortly after the activation that this particular unit was a proper prototype instead of an early production run radio. This is a detail I misunderstood prior to the unit shipping.

I only shared the 2+ hour video to Patreon supporters, but not on my YouTube channel for this reason.

Production

This past weekend, I received a second Xiegu X6200: this time, a production run unit!

Again, this unit was supplied to me on loan by Xiegu via their distributor, Radioddity who (in the spirit of full disclosure) is also a QRPer.com sponsor and affiliate.

[Note: Also check out Steve’s channel if interested in the X6200. He’s been testing power output, OS accessibility, and other aspects on the bench.]

POTA Time!

Two days ago–Tuesday, June 11, 2024–I took the new X6200 out for a POTA activation on the Blue Ridge Parkway (US-3378).

I had a couple of hours that morning to fit in the activation, including a round trip from the QTH. The best site for a quick activation was the Folk Art Center picnic area.

Thanks to the early hour, there was no competition for picnic tables.

I decided to pair my PackTenna 9:1 End-Fed Random Wire with the X6200. This provided a chance to test the ATU with a readily matchable antenna (in the future, I’ll make it sweat a bit more by using a transformerless random wire antenna).

This production run X6200 has the same firmware (version 1.0) as the prototype, but the hardware has received noticeable updates. I spotted two changes–one cosmetic and one that had a positive impact on performance–almost immediately.

In the activation video below, you’ll see that I spent a few minutes doing an overview of the X6200.

One of the first things I did was set up the X6200 for CW Message memory operation. I demonstrated (after a bit of head-scratching) how to input the CW message using the X6200’s built-in on-screen keyboard. (If the CW Message Memories confuse you, check out the short primer in my previous post).

Gear:

Note: All Amazon, CW Morse, ABR, Chelegance, eBay, and Radioddity links are affiliate links that support QRPer.com at no cost to you.

On The Air

The last time I hopped on the air with the X6200, it was proper work making any contacts. It was a struggle and it wasn’t the X6200’s fault. It was our local star!

I decided to start on 40 meters since it was still mid-morning. After calling “QRL?” and hearing no reply, I pressed the second CW message memory button where I loaded “CQ POTA DE K4SWL” and the radio started transmitting. Continue reading The New Xiegu X6200: First POTA activation in CW with a production unit! →

Field Reports, Guest Posts, News, Portable, POTA, QRP, Travel

The POTA Babe Reaches the Halfway Mark!

2 Comments

by Teri (KO4WFP)

It is said that all good things must come to an end and a POTA trip is no exception. Packing up camp at Reed Bingham State Park the morning of June 3rd was an easy endeavor.  Daisy and I were soon headed toward Savannah with a POTA planned along the way at Alapaha River Wildlife Management Area (US-7881). We passed through the communities of Tifton and Ocilla, Georgia.

As one travels through Georgia, you see a variety of crops along the road – cotton, peanuts, corn, pecans, blueberries, soybeans, etc. – as well as cattle in fields and poultry houses. As I worked my way toward Alapaha River Wildlife Management Area (WMA), I came across a processing plant for peanuts in Tifton, Georgia.

Peanuts are big business in Georgia. According to the Georgia Peanut Commission, the state of Georgia produces 52% of the peanuts grown in the United States which translated to 1.45 million tons in 2022. That is a boatload of peanuts!

Peanuts are planted April through June and then harvested about five months later in the fall. One fact I did not know is there is a “peanut belt” in Georgia, an area south of the fall line but omitting the coastal counties, where peanuts are planted in the state. I was driving inside this belt.

Peanut crop in the field. source: georgiagrown.com
source: Georgia Peanut Commission

Nuts aside, it wasn’t long before Daisy and I arrived at Alapaha River WMA. This WMA opened in 2016 and contains nearly 7,000 acres. According to a Georgia DNR article, the site has an estimated 2,000 gopher tortoises, the most for any state-owned tract of land in Georgia. This is not surprising given the density of sandhills on the property, a habitat in which gopher tortoises thrive.

The dirt road into the property was nicely groomed. I drove past areas of young planted pines as well as more mature pine stands. However, neither of these areas were conducive to an activation, partially because the trees offered no shade and partially because the branches were either too low or too high for me to install my EFRW antenna.

Entrance into Alapaha River WMA
Young pines

I continued on Jacks Creek Road and headed toward a dove field (the brown area on the map down below) at the point the road dead-ends. I  figured there may be trees along the edge of the field offering what I needed. I turned left onto North Bugle Trail and, off to the right hand side, saw an area with both shade and trees I could use.

source: Georgia Department of Natural Resources
The shady area for my activation QTH
Trees with good branch options

After donning my blaze orange attire and installing the Tufteln EFRW, I attached the new hitch system to the hubcap of one of Kai’s front wheels and the rope to the clip on Daisy’s harness so she could make herself at home along with me in the shade.

While checking out the shady area, I noticed several things – dandelions with their sunny, yellow faces and animal tracks in the sand. The set of tracks for deer were easy to identify. However, another set, not so. I think the second set belonged to a raccoon.

Deer track
Raccoon track (I think)

Today’s activation would be short as I had a three-hour drive ahead of me and needed to be home in time for my son’s evening driving class. (Yes, we’ve reached that stage of life in the POTA Babe household.) In 45 minutes, I logged 19 contacts including one park-to-park with Charles AB9CA at US-2275 and a QSO with Ronald N7WPO in Washington state! That QSO on 5 watts and a wire is part of the magic I mentioned near the end of my previous article.

QSO Map for Alapha River WMA Activation

During the activation I had watched the sun creep closer and closer to Daisy and me. When the time reached 11:15 AM, we were nearly out of shade. It was time to call QRT and head home.

This overnight POTA trip turned out well. I learned more about my camping set-up and the beautiful state in which I live. I had time to do what I love – ham radio in the outdoors. And, with these three activations, I now have 30 parks toward my 60 new-to-me park activation goal for 2024!

I am halfway there.

Thank you to all of you who have supported me thus far. However, my journey is far from over and the fun will continue. Where will I activate next as I work toward 30 more new parks? Stay tuned…

Equipment Used

[Note: All Amazon, CW Morse, ABR, Chelegance, eBay, and Radioddity links are affiliate links that support QRPer.com at no cost to you.]

Field Reports, Guest Posts, News, Portable, POTA, QRP, Travel

Overnight at Reed Bingham State Park for the POTA Babe

17 Comments

After a valid activation and exploration of Bullard Creek Wildlife Management Area, Daisy and I headed to Reed Bingham State Park (US-2195), roughly a two hour drive. Along the way, we passed a huge lumber mill and drove through the communities of Douglas, Nashville, and Willacoochee.

Lumber mill
Train Depot in Willacoochee, Georgia

Courthouse in Nashville, Georgia

Reed Bingham State Park, located in southwest Georgia, is named after Amos Reed Bingham, who envisioned a dam on the Little River to provide electricity to the rural community. Even though the flow of the river was not sufficient for that purpose, Colquit and Cook counties purchased 1,600 acres along the Little River and deeded the land to the state of Georgia, creating the park. A 400-acre lake was created in 1970 by the current dam and provides recreational opportunities for park visitors.

source: Google maps
The lake at Reed Bingham State Park
Overflow from the dam into the Little River

Besides working toward my 60 new-to-me park activation goal, the trip to Reed Bingham served another purpose – refining my camping set-up and routines before my twelve-day POTA trip this summer. I made quite a few notes about equipment that would make camping life better and realized I need to think through where to keep certain items so I can lay my hands on them more easily and quickly.

The tent at the campsite

A new item I purchased for hiking and camping  trips is a hitching system for Daisy. I want her to be able to “free range” while I set up camp, make meals, or visit the bathhouse but still be contained. Ruffwear makes a hitch system with a daisy-chain (aptly named, don’t you think?) on one end and a kermantle rope on the other.

I ran the daisy-chain around a large pine and then, as there was not another tree close enough, the kermantle rope to the rails on the top of Kai. A large carabiner slides up and down the rope and Daisy’s six-foot leash attaches it to a clip on the back of her new harness. The system worked well and eliminated her getting tangled in a lead line while in camp.

After setting up camp and eating supper, it was time to fit in an activation. There were two trees near the campsite – a large oak and shorter-than-usual pine tree. I opted for the pine tree as it was closer to my tent. (I longed to sit in the comfort of my tent on my Thermarest chair for the activation.) Continue reading Overnight at Reed Bingham State Park for the POTA Babe →

Morse Code, News, Skills

New to Morse Code? Embrace Your “Fist”! A message to budding CW operators

19 Comments

Are you a new CW operator, fresh on the airwaves?

Do you find yourself worrying about what your Morse code “fist” sounds like to others, or about making mistakes on the air?

If that’s you, then this message is for you:

Public Service Announcement: Stop worrying about how you sound on the air!

Several times a month, I hear from new CW operators who I’ve logged during POTA and SOTA activations .

This is no surprise! As I’ve said before, I wholeheartedly encourage new CW operators to get started by hunting stations in these on-the-air activities. After all, CW exchanges in POTA and SOTA are predictable and straightforward, giving you a great opportunity to practice your sending and receiving skills.

More often than not, new CW operators who’ve reached out will apologize for their “fist” or code sending skills. I get it…still…and I mean this is the most positive light possible… 

No Apologies Necessary

Give yourself a break! If your sending isn’t perfectly smooth or machine-like, that’s absolutely fine.

If you stumble and make mistakes, that’s absolutely fine too.

In fact, it’s a beautiful reminder that there’s a real human being on the other end of the signal, someone at their own place in their CW journey.

Yes, we should all strive for a good, readable fist, but especially in the beginning, no one expects you to sound like a seasoned operator.

And remember: every single Morse code operator on the planet has been a beginner at some point. We’ve all felt nervous, made mistakes on the air, and even flubbed our own callsigns. I’m certainly guilty of all three, and, to be completely honest, far, far more than once!

Embrace the Learning Curve

So, who cares if you stumble a bit? I can confidently tell you that most of us on the other end of the contact are cheering you on! We’ve been in your shoes, and we know the thrill of mastering this challenging but rewarding mode of communication.

Instead of apologizing, you deserve congratulations for diving into one of the oldest and most skill-demanding wireless communication modes out there!

Mistakes Are Badges of Honor

Photo from my first POTA CW activation int he summer of 2020.

Be proud of those mistakes! They’re not setbacks, but rather milestones on your CW journey. Embrace them, learn from them, and keep sending.

Your ham radio community is here to support you every step of the way!

73/72, and I look forward to putting you in the logs!

dit dit

Thomas (K4SWL)

Field Reports, Guest Posts, News, Portable, POTA, QRP, Videos

Soggy POTA: Pairing the Elecraft KX2 and AX1 Amidst Flaky Propagation!

6 Comments

On Saturday, May 4, 2024, I drove to the Hickory, NC area to visit my father, who had recently been released from the hospital and was starting rehab at a skilled nursing facility. I had a busy afternoon planned back home in the mountains, but I couldn’t resist squeezing in a quick POTA activation!

Many of you know this is a recurring theme for me – it’s rare that I have a lot of time for activations. I’d be doing far fewer if I couldn’t manage 45-60 minute windows to set up, operate, and pack up.

Tuttle Educational State Forest (K-4861)

The facility where my father is staying is only about 20-25 minutes from Tuttle Educational State Forest, so I had to stop by.

It was rainy that Saturday, so I was already thinking about Tuttle’s excellent picnic shelter. I had my Elecraft KX2 and AX1 antenna packed, and while operating under a metal roof with a compromised antenna isn’t ideal, I’ve had surprising success in the past, including one of my first Transatlantic Park-to-Park contacts (click here to read that field report).

I arrived at Tuttle and found that there was no one in the parking lot. Not surprising considering the weather.

I grabbed my gear and headed to the shelter, only to discover that the lights were on and it was reserved from noon to 5:30 PM. Dang!

Even though it was still drizzling, I wasn’t too concerned. Tuttle has plenty of trees, so I figured I could find a spot under a good canopy to protect my gear. I went back to the car for my rain jacket and my new folding foam seat.

A Funny Story…

I had been planning to buy the Nemo Chipper Foam Seat from REI, but a couple of days after adding it to my cart, one arrived in the mail!

It was a gift from Al (N4EII), who mentioned he loves his and uses it for SOTA and POTA because it’s so lightweight and portable. I think it was this very rainy activation that prompted him to send me the Nemo seat!

Thank you, Al, for reading my mind! So very kind of you!

Setting up

I found a picnic table under a heavy canopy and set up my Elecraft KX2 and AX1 antenna–one of my favorite radio/antenna combos.

That said, I was definitely taking a bit of a gamble. Band conditions (a recurring theme here lately) were quite rough and using a compromised antenna would be risky compared with, say, a much higher-gain 40 meter end-fed half-wave. But the AX1 is so quick to deploy, which is key when time is limited.

Gear:

Note: All Amazon, CW Morse, ABR, Chelegance, eBay, and Radioddity links are affiliate links that support QRPer.com at no cost to you.

On The Air

It being midday, I decided that 20 meters would likely be the best band choice.

I started calling CQ POTA and was a bit surprised that my first contact was Michael (N7CCD) in Washington State.

Michael is in my logs a lot–even though he runs QRP from home most of the time, he has a very effective hex beam that casts a signal into NC with ease. With the bands in such rough shape I didn’t expect to work him that day.

Then again, many of the solar numbers have been healthy, it’s just that the ionosphere has been quite unstable. This usually results in deep QSB (fading) thus contacts may be strong one minute, then completely gone the next. This is how I felt conditions were at Tuttle that day.

I continued logging stations at a very respectable rate. I did note a lot of activity from 5 land (Texas and Mississippi). It’s funny how sometimes a path will open like this. Indeed, Texas has had a most welcome opening into North Carolina a lot lately.

In the end, I worked a total of eleven stations–one more than the required ten for a valid POTA activation.

I did all this in just 16 minutes on air. That’s actually an impressive rate considering propagation was so flaky.

No doubt, I could have worked more stations if I had the time.

QSO Map

Here’s what this five-watt activation looked like when plotted out on a QSO Map (it’s still hard for me to believe this can be accomplished with such a small antenna!):

Screenshot

Activation Video

Here’s my real-time, real-life video of the entire activation.  As with all of my videos, I don’t edit out any parts of the on-air activation time. In addition, I have monetization turned off on YouTube, although that doesn’t stop them from inserting ads before and after my videos.

Note that Patreon supporters can watch and even download this video 100% ad-free through Vimeo on my Patreon page:

Click here to view on YouTube.

Soggy POTA

Rainy weather doesn’t stop me from activating if I have my mind set on it.

That said, when it’s raining, I do seek out parks with shelters. It makes the whole set-up process easier and quicker.

Ideally, you want your antenna out in the open, but I’ve even used quarter wave verticals in shelters without issue (I’m thinking of this Lake Norman activation in particular).

Of course, I also keep a small rainfly in my car for makeshift shelter if needed. With a rainfly, camping chair, and kneeboard, I can activate in the wettest of weather. In fact, a rainfly saved this quick Field Day activation last year.

And of course, when raining, you can always activate from inside your vehicle! That may be the easiest option of all for some of us.

Again, Al, thanks again for the Nemo seat – it’s fantastic!

Thank you

Thank you for joining me during this activation!

I hope you enjoyed the field report and my activation video as much as I enjoyed creating them.

Of course, I’d also like to send a special thanks to those of you who have been supporting the site and channel through Patreon, and the Coffee Fund. While not a requirement, as my content will always be free, I really appreciate the support.

As I mentioned before, the Patreon platform connected to Vimeo makes it possible for me to share videos that are not only 100% ad-free but also downloadable for offline viewing. The Vimeo account also serves as a third backup for my video files.

Thanks for spending part of your day with me! And today being Memorial Day, my thoughts are with families who’ve lost loved ones in service to their country.

Cheers & 72,
Thomas (K4SWL)

Field Reports, Guest Posts, News, Portable, POTA, QRP

A Glancing Blow for the POTA Babe

19 Comments

by Teri (KO4WFP)

by (Wednesday, May 15th, Glenn W4YES and I decided to activate a new park for me – Sansavilla Wildlife Management Area (US-3773), a wildlife management area (WMA) along the Altamaha River next door to my last activation – Penholoway Swamp WMA.

Google maps

We arrived at a decent hour (9 AM) and ahead of schedule. The entrance is off Highway 25 and across the railroad tracks. After passing a church, the road changes from pavement to dirt and the fun begins!

Sansavilla WMA Map – source: Georgia Dept. of Natural Resources

Morning band conditions. source: https://hamradiofornontechies.com/current-ham-radio-conditions/

We drove down what is Sansavilla Road almost until it dead-ends as I hoped to set up close to the Altamaha River. However, along this road ran a good set of power lines. Given I would run QRP, it was time for Plan B.

Road into the WMA

power lines running along Sansavilla Road

We backtracked, took a right onto River Road and then a right toward the river. This road dead-ends at a public boat landing inside the WMA. There is a pavilion with concrete benches and tables. A short distance beyond the pavilion is the landing to which we drove for a quick view of the river whose current moved at a rapid pace.

route to boat landing

credit: Glenn W4YES

boat landing. credit: Glenn W4YES

Altamaha River

Glenn joined me this activation and, given the last experience, we made some changes to his set-up. Instead of using my Yaesu FT-891, he brought the Yaesu FT-991A in his possession with which he familiarized himself over the past week. He dialed the power down from 75 to 5 watts. (Yes, he’d be working QRP!) He also switched antennas from the Pacific Antenna 2040 trap dipole to the Chelegance MC-750, hoping the set up would be easier and give him the flexibility of changing bands. Continue reading A Glancing Blow for the POTA Babe →

Field Reports, News, Portable, POTA, QRP

The POTA Babe Resumes Pursuit of Her Goal

6 Comments

by Teri (KO4WFP)

Now that life has settled down, it is time to return to my 60 new-to-me park activations goal for 2024. I currently stand at 24 out of the 60. For #25 on the list, I chose Penholoway Swamp Wildlife Management Area (US-3767) outside of Jesup, Georgia.

This park is a one-and-a-half hour drive from my QTH. I set out around 8 AM this past Wednesday, May 8th for my activation. Rather than drive Interstate 95 most of the way, I opted to drive through rural Georgia which I prefer. The route took me through the communities of Hinesville (just outside of Fort Stewart, home of the Army’s 3rd Infantry Division), Ludowici, and Jesup.

As I entered Jesup, I encountered a sizable manufacturing plant next to the Altamaha River. Owned by Rayonier, the plant is the largest speciality cellulose plant in the world, producing 330,000 metric tons a year.

Paper mills are big business in Georgia. According to georgiagrown.com, the state of Georgia accounts for 21% of all US exported pulp and paper (both newly milled & recycled products). I found a 2015 Georgia Forestry Commission report noting there are 22 pulp and paperboard mills in Georgia resulting in $12.5 billion in revenue.

Rayonier cellulose plant

Paper mills often produce a smell like rotten eggs or cabbage. In Savannah, there was the Union Camp paper mill (later purchased by International Paper) on the Savannah River. The joke I remember while growing up in Savannah was that when tourists asked what that smell was, you would reply “the smell of money.” The Savannah mill is still operating and produces a million tons of paper product every year which eventually gets made into cardboard boxes.

Penholoway Swamp Wildlife Management Area (WMA) is a 10,500+ acre property near the Altamaha River with hunting opportunities. The WMA contains lots of pine stands including several stands of longleaf pines which are maintained by prescribed fire and mechanical thinning. As I mentioned in my Oliver Bridge WMA trip report, longleaf pine areas are important habitat for threatened species such as the gopher tortoise and indigo snake.

evidence of a controlled burn

I thought I would set up my station near the kiosk at the entrance. However, there was not much room and what little there was didn’t offer much shade. Looking at the map I printed from the GA Department of Natural Resources (DNR) website, I decided to drive down Post Road to where it dead-ends into Hinson Road near the Altamaha River. Maybe that section of the park would be more secluded and offer some shade.

park entrance off River Road

Entrance area with kiosk

pine stands in the WMA

a road off the main drag (Post Road)

Sure enough, the section of Hinson Road off to the left of Post Road went a little way before being blocked off by a gate. Oaks, pines, and other trees created a canopy over the road and looked like a perfect QTH off the beaten path.

WMA Map. source: https://georgiawildlife.com/penholoway-swamp-wma

a shady location

Before I left the house, I checked the GA DNR Hunting Regulations booklet as to what might be in season for this WMA. Turkey is currently being hunted, though I didn’t expect on a weekday to run into many hunters. Either way, I made sure to don my blaze orange hat and vest as well as put Daisy’s vest on her before setting up my equipment. Continue reading The POTA Babe Resumes Pursuit of Her Goal →