Tag Archives: Field Reports

Field Reports, Guest Posts, Portable, POTA

Poland Adventures – Part II

2 Comments

by Thomas (DM1TBE as SP/M0KEU/P)

After completing my first POTA Rove, it was time to look for other opportunities. The next day, we planned a trip close to the border between Poland and Germany. Due to the high density of POTA parks in Poland, it was not too hard to find a POTA park for me.

The park Łęgi koło Słubic Nature Reserve (SP-1908) is a floodplain for the Oder River, the border river between Poland and Germany. As described in my previous post, the border was shifted from further east to the Oder river as part of the territorial changes at the end of World War II. Later, Poland was the only country, along with Czechoslovakia, where people from East Germany, i.e., the Soviet-controlled part of Germany, could travel to without permission. This arrangement came to an end in 1980 with the rise of the Solidarność (Solidarity) movement in Poland, a social movement against the pro-Soviet government, and the subsequent declaration of martial law.

J. Żołnierkiewicz, Public Domain, via Wikimedia Commons

After the reunification of Germany in 1990, the border became a kind of ‘wealth border’ between Eastern and Western Europe, giving rise to various issues such as crime and immigration. Following Poland’s accession to the European Union in 2004 and its entry into the Schengen Area in 2007, which involved the removal of all border controls, the situation improved. Now the only thing indicating a border ahead is the black-red-yellow post.

The current rapid pace of development in Poland does not make it impossible to overtake Germany in the foreseeable future.

Back to the activation. I took the following equipment with me:

When going (as in walking) to an unknown park without knowing the circumstances, I like to have the option to choose between an antenna with a small and a large footprint. So far, I have just made a handful of car-based activations. But I increasingly like it as it opens another world with big antennas and bigger rigs. We recently made a test activation with an Icom IC-7300 and a 6-band Cobweb antenna from AWK, by chance also from Poland.

But that’s another story.

Not sure if I have mentioned it: My BaMaKey had a technical issue and I had to send it back to the manufacturer. The repair took just a couple of days and the communication was very smooth and convenient. I was happy to have my favourite key back in time before my vacation.

So after I dropped my family to do their business, I went on and looked around for a nice place. Of course, I had to see the actual border.

Left Poland, right Germany. In the background is Frankfurt (Oder), not to be confused with the more well-known Frankfurt am Main.

The weather looked a bit difficult, but it remained dry.

Eventually, I found a place in a meadow with more than enough space for the SOTABeams linked dipole so I could leave the JPC-12, the ground mounted vertical, in the backpack. In the meanwhile, I am used to the SOTABeams antenna. I can build it alone in less than 5 minutes and – as it is hard to beat a dipole – have a very good antenna for operating QRP.

The activation was difficult. It was a holiday season, a morning during a weekday, and the conditions were tough. After 30 minutes, I had just 4 QSOs. So I asked in the chat groups of my local ham radio club and a German POTA group for help. After 1.5 hours, I ended the activation with 15 QSOs, of which 5 were from the alerted groups. At least the place was nice, and the weather was not as hot as in the days before.

Log Analyzer by DL4MFM / Google Maps

The next day, I wanted to spend some time with my 7-year-old son, and I was looking for an opportunity to combine it with a quick activation. I remembered the bunkers and museums of the Ostwall (East Wall), technically Festungsfront Oder-Warthe-Bogen (Fortified Front Oder-Warthe-Bogen). The structure, spanning 120 km / 75 miles in total, was constructed between 1934 and 1944. It stood as the most technologically advanced fortification system during the era of Nazi Germany, and continues to be one of the largest systems of its kind in the world today. Continue reading Poland Adventures – Part II →

Antennas, Field Reports, News, Portable, POTA, QRO, QRP, Reviews

Golden Hour QRP POTA Activation with the REZ Ranger 80 Portable Vertical Antenna

6 Comments

On Sunday, August 20, 2023, en route to check in with my parents, I popped by Lake James State Park for a little early evening POTA fun.

In the car, I’d pack the Elecraft KX2 kit and I still had the REZ Ranger 80 vertical antenna system on loan from REZ Antennas (it’s since been returned to them).

The last time I deployed the REZ was on Mount Mitchell in some pretty sketchy weather.  While I recorded a couple of short videos, I didn’t record a full activation video since we were having a family picnic that day.

Before sending the Ranger 80 back, I wanted to fit in a proper activation showing how I deploy the antenna, how I tuned it for the first time, and how it might perform on the 40 meter band.

Lake James State Park (K-2739)

It was golden hour at Lake James and the park was bustling with activity. There were kids running around, parents chasing them, and several families cooking out at the numerous picnic sites.

I sought out a location that was private and quiet mainly because the Ranger 80 antenna has four 31 foot radials, thus a large footprint; I didn’t want children, pets, or anyone tripping on the ground radials.

Fortunately, one of my favorite spots overlooking the lake was free, so I could simply set the Ranger 80 up in the woods where folks weren’t walking.

The Ranger 80 is super easy to deploy: simply extend the vertical, attach it to the top of the base, then attach the stainless spike to the base and plunge the entire thing into the ground. Next, you deploy the four radials and connect it to the base of the antenna.

It only takes a couple of minutes especially since the counterpoises are wound using the over-under method. I simply tossed each line into the woods and didn’t worry if they were all lying perfectly on the ground.

Note to REZ: Consider offering optional high-visibility counterpoise wires–for those of us setting up in busy parks, it would make the ground radials more conspicuous to passersby.

Next, I needed to tune the Ranger 80 for the forty meter band.

Typically, when I use a sliding-tap tuning coil style antenna like this one, I turn on the radio and move the coil until I hear an audio peak, then I fine tune it by sending a “dit” on the radio, checking the SWR, and adjusting the coil slider.

That evening, though, I had my RigExpert AA-35 Zoom antenna analyzer so I set it to continuous SWR monitoring and adjusted the coil until I achieved a good match. Easy.

I should add here that when you use an antenna like this frequently, you learn where the best tap points are on the coil thus tuning becomes easier. My friend Alan (W2AEW) actually made a PVC rig for his coil antenna (click here to check it out).

With the antenna all set up and ready to rock-and-roll, I simply hooked up the Elecraft KX2, my VK3IL pressure paddles, and prepared the logs.

It was time to play radio! Continue reading Golden Hour QRP POTA Activation with the REZ Ranger 80 Portable Vertical Antenna →

Digital Modes, Field Reports, FT8, Guest Posts, News, Portable, POTA, QRP

Conrad’s Kayak POTA Activation on Minnie Island

6 Comments

Minnie Island K-1698 Kayak Activation

by Conrad (N2YCH)

9/1/2023

As many readers know, I am on a Parks on the Air (POTA) quest to activate all references in the state of Connecticut. There are 136 parks, and four of them are only accessible by boat. You may have seen my recent field report here on QRPer.com about activating three islands located in the Connecticut River. For those islands, I enlisted professional help from a boat captain with the navigation experience and proper tools (like radar and maps) to access those islands.

The final boat-only accessible island is Minnie Island, located in the middle of Gardner Lake in the town of Salem, Connecticut. I DO have experience kayaking on a Lake, thanks to my uncle, who has two kayaks and has taken me out on Tillson Lake in New York’s Hudson Valley a number of times. Unlike the challenges the river posed, I felt like I could manage the lake on my own. I did need a kayak, though, which I didn’t own.

I had to do some kayak research then. In case you didn’t know this, different kayaks have different specifications on how much weight they can hold. I’m a big guy, six foot five inches tall. Add me, plus a backpack of radio equipment, and I needed to be sure I didn’t sink.

I started on eBay, looking for people selling used kayaks. There are all different kinds of kayaks. Some made for the ocean and dealing with waves and others for casual lake paddler. Some have rudders, some have small, sealed cockpits and some even have motors. I had no idea how serious you could get with all of the accessories and options. I was really looking for something simple.

After striking out on eBay, I found a fishing supply store at the end of the Connecticut River that also had kayaks you could rent. I visited their web site and was happy to see that they were having an end of season clearance sale, where they were selling their rentals. I visited their shop and after looking at my options, I ended up buying an Old Town Vapor 10 kayak. It came with a paddle and life jacket and it was 50% of the price new. A great bargain. The added benefit is now I own my own kayak…a friend suggested that now that I do, there might be IOTA activations in my future.

What sold me on the Vapor 10 was the open cockpit. No trying to squeeze myself in and plenty of room to bring a backpack with the radio equipment in-between my legs. Also, I was able to fit it into my Jeep Wrangler.

Next stop, the Gardner Lake Boat Launch, which was about a 30 minute drive North. Continue reading Conrad’s Kayak POTA Activation on Minnie Island →

Field Reports, Guest Posts, News, Portable, QRP, SOTA

KM4CFT: A Relaxing Labor Day SOTA Activation

7 Comments

Many thanks to Jonathan (KM4CFT) who shares the following guest field report:

A Relaxing Labor Day SOTA Activation

by Jonathan Kayne (KM4CFT)

September 4, 2023

Days off from work can be a really great thing. And for someone who spends most of his time indoors at a computer, I try to find plenty of excuses to go outside and get some fresh air. Labor Day is one of those days I get off from work, so I decided I would do a SOTA activation, but I wasn’t entirely sure where.

Luckily, there are plenty of tools out there to help with planning a SOTA activation, namely sotl.as, which shows all the summits on a map along with additional information about the summit.

I wasn’t entirely sure which one to pick, so I just searched around and came across Evergreen Mountain, which has the reference designator W0C/FR-076. Doing some research showed that it was about a 2-3 mile hike to the summit from the parking lot, which was perfect. The air around Denver, CO can be somewhat thin and these hikes can be strenuous if you aren’t used to it. I have been living in the Denver area for 2 years and I still am not used to it!

After a small amount of planning, I pack my radio and antenna into a bag along with the usual hiking gear and drive to the base of the mountain. There were a lot of cars already parked there, so I had to park on the side of the road. It seems other people had the same idea that I did!

The trail to the summit of Evergreen mountain was comparatively easy due to the trail being designed for mountain biking. Mountains in Colorado tend to be incredibly steep, which can make them quite the workout, even if the hike is short. This trail consisted of plenty of switchbacks, which made the hike incredibly easy, trading steepness for distance. This was a massive bonus from my perspective!

As you might have guessed, Evergreen Mountain (and the town) get their name from the impressive number of evergreen trees in the area. As you drive towards the town, it almost becomes exclusively pine trees everywhere!

As I walked, I couldn’t help but notice all the fallen pine trees, which concerned me, but I quickly came across a sign explaining the reason.

I really got to enjoy walking through these trees, and listening to the wind howl through the mountains. It also had the benefit of keeping me nice and cool in the reasonable 83° temperature outside.

The trees also blocked the views of the mountains to some extent, but my research showed me that we get plenty of gorgeous views closer to the summit!

Right before the summit loop, I was rewarded with a small glimpse of the views that were to come!

I made it to the summit loop trail, and advanced to the last little bit before the summit. Right before the true summit there is a tenth-mile little trail that leads to a scenic overlook. I, of course, had to go and take a look.

I went back and made it to the summit. The top of the mountain was pretty flat so I just went to what I thought was the summit and set up my station there. Searching around showed that I was well within the activation zone. The area had some nice rocks to sit on as well as trees for me to lash my crappie pole to with para-cord.

I unpacked my gear and started to set up. The gear I brought was as follows:

With SOTA, I have the opportunity to use my VHF/UHF equipment to make some QSOs. I find it quite rare for me to do simplex communication on VHF or UHF these days as I almost exclusively operate on HF. Also, I like to try to operate in the parts of the bands with the lowest license requirement so that the less experienced hams have an opportunity to work me. With this, I can give our technicians a chance to chase SOTA! Continue reading KM4CFT: A Relaxing Labor Day SOTA Activation →

Field Reports, Guest Posts, Morse Code, News, Portable, POTA, QRP, Travel

Alan’s Long Beach Island Radioactive Vacation!

8 Comments

Many thanks to Alan (W2AEW) who shares the following guest post:

Radioactive vacation on LBI (Long Beach Island)

by Alan (W2AEW)

We look forward every August to our much needed 2 week vacation “down the shore” as we say here in New Jersey.  Our vacation spot of choice is Long Beach Island, one of the barrier islands on the Jersey coast. This is an 18 mile long island that hugs the Atlantic coast of southern NJ, just north of Atlantic City.  The part of the island we love to stay in is called Surf City.  The Surf City area has been continually populated since 1690, although the town of Surf City was officially established in the late 1800s.

The XYL and I are both pretty fair skinned, so laying out on the beautiful LBI beaches everyday isn’t really our thing.

So, the house we rent is actually on the bay side, facing west, overlooking the Manahawkin Bay.  We enjoy sitting back and watching (and occasionally participating in) the wide variety of activities on the bay – the fishing & crabbing, the power boats, personal watercraft, paddle boarding, sailing, etc. Our favorite though, and the thing that keeps us coming back every year, are the awesome sunsets over the bay.

Of course, we always need to find a house that is pet friendly. Sophie loves LBI also, especially the long walks around town with the sea breeze.  Here she is waiting at the top of the stairs – hoping to hear the magical word….  “walk”…

LBI is certainly a family and pet friendly place.  Even the local Dunkin Donuts has a wall dedicated to the local pets:

I certainly planned to do a fair amount of QRP operating while on vacation – both from the rental house as well as POTA from the nearby parks (more about this soon).  But lest you think this was purely a radioactive vacation, let me reassure you that we did a lot of “normal” vacation activities too.

Like most, a lot of vacation is about relaxing, eating, other stress relieving activities, eating, shopping, and of course, eating…  Breakfasts were typically some homebaked muffins, or even some fresh biscuits from the oven with some great Black Bear Jam – a gift from a good friend in NC.  Yummy!

The main meals were a mix of good ‘ole home cooking and some great local cuisine, including great Jersey pizza from Panzone’s,  fresh local seafood from Mud City Crab House and   Pinky Shrimp’s Seafood Company.  Of course, no trip to LBI is complete without getting some of the best burgers in the state from Woodies Drive In in Ship Bottom, right next to Flamingo Mini-Golf – one of *many* mini-golf places on the island.  I’ve personally seen Ray Romano golfing at Flamingo with his family.

I did manage to do some other “normal” vacation activities besides radio…  A couple of relaxing afternoons on the beach, completed a 1000 pc jigsaw puzzle, read two James Patterson novels, lounging on the decks overlooking the bay and lots of strolls with the XYL and the dog.

But who’s kidding who, this is a QRP blog right!  Let’s get radioactive!

One of the first tasks after unpacking was setting up the antenna at the rental house.  The location was great, right next to the bay!  I strapped my slip-fit military fiberglass poles to the corner post of the 2nd floor deck, which made a great support for the 40m EFHW wire.  This is the same UNUN & antenna that I featured in a “build” video a few years ago. Continue reading Alan’s Long Beach Island Radioactive Vacation! →

Field Reports, News, Portable, QRP, SOTA

QRP SOTA: Beautiful day for a hike to the summit of Bakers Mountain!

3 Comments

Sometimes, I crave a nice summit hike but don’t have enough time in the schedule to fit in a long one.

When I’m doing overnight trips to my hometown of Hickory, NC, my go-to spot for a proper hike is Bakers Mountain Park. The icing on the cake is that Bakers Mountain is also a SOTA summit (W4C/WP-007).

I wish Bakers Mountain Park was a POTA site as well, but at present the US POTA administrators aren’t including county and municipal parks–only state and national parks.

For more information about Bakers Mountain, check out this field report in the archives.

On Tuesday, August 1, 2023, I only had about 2.5 hours to fit in a hike and SOTA activation. That was plenty of time to hit Bakers Mountain!

Bakers Mountain Park has a nice long-ish loop around the perimeter of the park called the “Bakers Mountain Loop”; it’s about 2.75 miles long and has a reasonable amount of elevation change over the topography.

Adding in the spur trail to the true summit of Bakers Mountain, I’d say my total hike is about 3.25 miles or so.

Lookout platform on the Bakers Mountain Loop Trail.

Note that I actually include a bit of my hike to and off of the summit in the activation video below.

Setting up

Can you spot the MW0SAW EFHW hanging in the tree?

Once on the summit, I chose a spot to set up. Since I planned to deploy my 40 meter end-fed half-wave, I looked for a branch overhanging the summit perimeter trail.

Next, I deployed my trusty 40 meter EFHW that Steve (MW0SAW) made.

I also forgot my Tufteln/N0RNM knee board, so used my GoRuck GR1 backpack as a field desk. It worked pretty brilliantly, actually. Continue reading QRP SOTA: Beautiful day for a hike to the summit of Bakers Mountain! →

Field Reports, Guest Posts, News, Portable, QRP

POTA Quest: Conrad Activates Three Connecticut River Islands!

19 Comments

Connecticut River Island Activations

by Conrad (N2YCH)

August 22, 2023

I’m on a POTA quest – activate all references in the state of Connecticut. There are 136 parks in the state and four of them are islands, only accessible by boat. Three of which are in the Connecticut River: Dart Island (K-1659), Haddam Island (K-1673) and Selden Neck State Park (K-1714).

I don’t own a boat. Plus, even if I did, I’m not sure I’d be brave enough to tackle the Connecticut River on my own. I have no experience navigating these waters, and it’s a real river, more than you’d want to try with a kayak with the currents and all. Even the POTA web pages for these islands warns “Boating experience and channel knowledge recommended.”

This created a dilemma –  how do I get to and activate these islands?

I strategized for a while and decided on chartering a “river cruise” boat who actually listed visiting Dart and Haddam islands as part of their services on their web site. The boat captain hadn’t visited Selden Neck, so that was new, even to him. However, he had a radar, and depth finder on his boat that mapped the channel and gave us the depths of the waters near each island. His boat drew 3 feet, so we had to have at least that much depth in each place we stopped. He also had a small “Achilles” boat that connected to the back of the cabin cruiser that we used to get ashore.

We left from a marina that was directly across the river from Dart Island but decided first to head South to Selden Neck and then work our way back North to Haddam and Dart.

Putting aside the island access for a moment, I also had to strategize on what gear to bring along to do these activations. I am primarily a digital mode activator and have used the Elecraft KX3 and AX1 antenna in many of my travels where I needed a light kit.

However, I thought, I can use the KX3 but take along a more efficient antenna. I used my Buddipole tripod and mast with a versa-T and a 17’ 9” Alpha whip antenna and a 15’ counterpoise elevated off the ground with a Home Depot electric fence post.

Because the mast elevates the versa T to 11’ high, and the telescoping whip at another 17’ 9”, I was able to get the antenna nearly 30’ off the ground to the top. It was easy to pack and carry and provided better coverage than the AX1 would have. You’ll see just how good QRP on FT8 can be in my Dart Island coverage map.

Equipment List:

Once I decided on the KX3 and the Alpha telescoping whip, I packed my backpack with the computer, cables, the radio, batteries and extra antennas. I always have the AX1 and a Packtenna EFHW as backups and they fit easily into the backpack. Two bags would need to make it from the boat to each island, the radio gear with computer and the antenna bag with the tripod and telescoping antenna. To be safe, since it would not be easy to do this again if something didn’t work, I brought along an entire backup system, packed in a second backpack with an Icom 705 and my spare laptop.

One of my goals with POTA is local discovery, and my boat captain was very knowledgeable about the river and the various sites along the shores. I learned that a manufacturing plant owned by Pratt and Whitney still uses water from the river as part of their manufacturing processes and also that there was a sea plane airport along one bank. I saw an automobile ferry along the way that I had no idea existed and saw the site of the former Connecticut Yankee nuclear plant that was decommissioned in 2004. Continue reading POTA Quest: Conrad Activates Three Connecticut River Islands! →

Field Reports, Guest Posts, Morse Code, News, Portable, QRP, Travel

Steve tests a compact, carry-on QRP field radio kit while on holiday in Croatia!

9 Comments

Many thanks to Steve (MW0SAW) who shares the following field report:

Portable Ops in 9A Land

by Steve (MW0SAW)

Just back from a family holiday to Croatia and I was lucky enough to be able to take a QRP station with me on my travels. It’s always good to stop and review what you took and how it worked out, else you won’t be able to iterate and improve next time.

My wife and I have always been efficient minimalist travellers and even now with our daughter the traditional continues. And let’s face it, who doesn’t love to get their inner pack geek on when it comes to QRP ham radio and travel!

I’m very lucky to own several QRP radios, Elecraft KX2, FT-818, IC-705, but for minimalist ops they are all a/ too expensive and/or b/ too heavy & bulky. The choice naturally brought me to a CW rig and after some deliberating I chose my Venus SW-3B over my newly constructed QCX mini. The Venus is just more versatile having 3 bands and SSB RX.

So the item I spent weeks torturing myself about prior to the holiday was the antenna. You have to try to imagine from where you will operate. I don’t think you can beat a wire antenna like the K6ARK EFHW however you need trees or a mast, I thought I was most likely to operate from the hotel room balcony. I came to the conclusion, despite the extra bulk, that the Gabil 7350T and Tripod would be my companions.

And how did I get on? Well the first time I setup the station on the balcony the electrical interference was terrible, and I could not hear any signals. So I had to adapt and go for plan B. Which actually turned out to be a stunning spot.

Operating on a small jetty next to the salt water on the island of Sveti Nikola near the town of Porec in the early mornings, I deployed my station and called CQ. You can see from the RBN that my 5 watt signal was making a good impact, however only had a couple of European stations come back to me from my calls.

I decided to switch to hunt and pounce mode, and I was amazed to work several USA, VK and ZL stations over a few days. It’s such a great feeling to work DX with such a modest setup. The icing on the cake for an already special family holiday. I think you will agree such a beautiful place.

So overall I was very happy with my station choices.

Kit list:

(Note: Note that Amazon links are affiliate and support QRPer.com)

Until my next QRP adventure.
Best 73
Steve
9A/M0SAW (MW0SAW)

UPDATE:

I didn’t mention it in my report (above) as he hadn’t replied to my email, but I did work Peter Parker VK3YE (he has a good YouTube channel). I’m in his video about 10mins 45seconds in:

Accessories, Field Reports, News, Portable, POTA, QRP, Videos

Pairing the Yaesu FT-817ND and Chelegance MC-750 at South Mountains State Park

3 Comments

After completing a lively little POTA activation at Lake James State Park (K-2723) and then Table Rock Fish Hatchery (K-8012) on the morning of Monday, July 31, 2023, I decided to squeeze in one more POTA adventure on what became a mini rove.

Since nearby Tuttle Educational State Forest is closed on Mondays in the summer, I chose to visit South Mountains State Park (K-2753) instead–it was only a few minutes further afield than Tuttle.

After leaving Table Rock, I picked up a quick lunch in Morganton and drove to the main entrance of South Mountains and set up at the equestrian picnic area.

South Mountains State Park (K-2753)

 

The weather that day was beautiful and so was the drive.

I decided to deploy my Chelegance MC-750 this time, just to shake things up a bit. If you know me, when I do little roves like this, I typically like to use different radios and/or antennas at each site.

I paired the MC-750 with my Yaesu FT-817ND. My reasoning for picking the ‘817 was because I could use the SO-239 connection on the back of the radio. The new cable assembly/feedline I was using had PL-259s on each end.

Speaking of the new assembly, at the Dayton Hamvention this year, I popped by the ABR Industries booth and Chuck gave me (full disclosure–at no cost to me) a new product to test in the field: a 20 foot PL-259 to PL-259 assembly made with their ABR240-UF cable and with 5 in-line ferrites. What makes this cable unique is that it sports a bright orange flexible webbed jacketing which makes it very easy to see on the ground.

They’ve been informally calling it their “POTA cable.” I immediately knew why this would appeal to POTA ops: one of my constant fears is that someone will unknowingly trip on my feedline while I’m in the middle of an activation. Black coax cable on the ground is very difficult to see (I’ve even tripped on my own lines)–this high visibility jacketing makes cable very conspicuous. Just check out the photos above. Continue reading Pairing the Yaesu FT-817ND and Chelegance MC-750 at South Mountains State Park →

Field Reports, Guest Posts, Portable, POTA, SOTA

Unveiling Poland: POTA, SOTA, and a Glimpse into History – Part 1: The Rover Award

7 Comments

by Thomas (DM1TBE as SP/M0KEU/P)

Just like last year, my family and I combined a visit to my parents near Berlin, Germany in the summer with some extra days in the region. As in last year, we went to Łagów (German: Lagow) in Poland.  The reasons we chose Łagów again, was a lovely holiday house, directly on a beautiful lake with a beach – all not too far away from Germany – and the good memories we had from our previous stay.

There is also a SOTA summit, which was only activated once in the 5 years when we visited the area last year. As I started with POTA this year and there are also a couple of POTA spots around, I thought it would be worth another visit.

The area around Łagów has been populated since the Bronze Age, i.e. >1000 BC. In 1251, the area came under German rule and the first mention of the town was in 1299. In the 14th century, the Knights Hospitaller built a castle that exists to this date. For the year 1367, it is documented that the convent of Lagow consisted of seven knights and one priest of the order.

At the foot of the fortress, a settlement for craftsmen and servants emerged, secured by defensive walls and two gates.

Gate in the middle

It is obvious that the builders of the gates did not have modern cars in mind when planing the size of the gates.

During the Thirty Years’ War, one of the longest and most destructive conflicts in European history, Lagow was captured and destroyed by the Swedes in 1640. The hand drawn map below from 1662 already shows Lagow.

During the fighting at the end of World War II in the spring of 1945, the castle and the village did not suffer mayor damages. After the war’s end in 1945, Lagow was placed under Polish administration, and Polish migrants settled in the area. The local Polish authorities expelled the native German residents who had not fled. The spelling of the town’s name was changed to Łagów.

Germany lost large parts of its territory as a consequence of the wars it has started after both major wars of the last century. Lagow was part of the lost territory depicted in the green area below.

The territorial gain probably wasn’t something Poland was very happy about, as the Soviet Union annexed a significant portion of Eastern Poland at the same time and incorporated the previously Polish soil mainly into the Soviet Union republics of Ukraine and Belarus. Consequently, the country experienced an effective westward shift.

Red: Pre-war Poland, Pink: Post-war Poland

Over a long time, expelled Germans were very vocal about claims to return the area to Germany and yet rather quiet about their share in the terrible events that unfolded between 1933 and 1945. Therefore, Germany’s eastern border was not recognized until 1990 by the German government. However, the issues resolved over the time and today, 33 years after the official acceptance of the border, no one I know even thinks about this as an issue any more. Additionally, the Polish side appears to be more relaxed about this topic. I have seen a lot of bilingual information panels and some memorials for former German inhabitants. Nice to see the wounds heal.

The Activations

The holiday house was within the borders of a POTA park. Having a 7-year-old “early bird” son, helped my to wake up early enough to get my 100 contacts for the POTA Early Shift Activator Award.  I walked to the edge of the facility and raised my SOTABEAMS Band Hopper III linked dipole for the 20-, 30- and 40 meter bands as soon as my son woken me up and ended my activity around 9:00 local time nearly every day.

Although I had a bunch of other antennas with me, I made all activations during my journey with this antenna and an Icom IC-705.

POTA Rover Warthog Award

The density of POTA-parks is way higher in Poland than in my home region in Southern Germany.  With the help and tips from Damian (SP9LEE) I drafted a plan to activate 5 parks on a single day. Continue reading Unveiling Poland: POTA, SOTA, and a Glimpse into History – Part 1: The Rover Award →