Category Archives: Videos

Antennas, Field Reports, News, Portable, POTA, QRP, Videos

Breaking in the new Elecraft AX2 during a short POTA activation

6 Comments

As I mentioned in my recent AX1 vs AX2 video and blog post, I purchased an Elecraft AX2 antenna and bi-pod in late January (note: two days before Elecraft announced their February ’23 sale price! Doh!).

I received the AX2 package a few days later and I was certainly eager to take it to the field.

My first opportunity came on Tuesday, February 14, 2023, when a short activation window opened up in the afternoon.

Zebulon B. Vance Birthplace (K-6856)

One of the first things I noticed after taking the AX2 out of the package is just how solid and compact it is. The AX1 is short, but the AX2 is a few inches shorter because the base is more compact.

Unlike the AX1, the AX2 is a mono band antenna, thus the coil only needs to accommodate one band. When you receive a new AX2, it’s configured for 20 meters out of the box, but the user can modify the coil to work anything from 20 to 6 meters.

“Resonant-ish”

Even though I mentioned this in my AX1 v AX2 article and video, I’d like to reiterate that the AX2 is nearly-resonant on 20 meters. It is not reliably resonant.

I’ve still been receiving a lot of messages from readers stating that their AX2 and AX1 are resonant on 20 meters, so they don’t pack any sort of matching device in their field kit. They simply hook the AX2 up to their little QRP radio and hop on the air.

While it’s true that these antennas may provide an acceptable SWR most of the time, you really can’t rely on a solid, reliable match as you could with an end-fed half-wave.

I’ll repeat what I mention in a previous post:

Small verticals like the AX1 and AX2, that use coils to electrically “lengthen” the antenna, have a higher Q than, say, a large aperture quarter or half wave antenna. In practical terms, this means that the window of resonance is narrow and more fickle than, for example, an end-fed half-wave.

A lot of factors can affect the SWR on higher-Q antennas like the AX1/AX2 including:

      • the type of terrain,
      • height off the ground,
      • length of counterpoise,
      • configuration of counterpoise,
      • and, most notably, the operator’s own body capacitance.

You may find that the AX2, for example, is natively resonant on 20 meters at one location, but isn’t at another location. This is quite normal. It’s also the reason why Elecraft states that both antennas are designed to be used with an ATU.

So there you go! If I hook up my AX1 or AX2 to a radio, I’ll always have some means of matching the impedance–either an external ATU, or a capacity hat. You can also tinker with the length of the telescoping whip and counterpoise to tweak the match.

The important part–especially if pairing these antennas with a radio that lacks both an internal ATU and SWR meter (say, the MTR-3B, G106, or TR-35)–is that you’ve some means to check the SWR before conducting a long activation session. Continue reading Breaking in the new Elecraft AX2 during a short POTA activation →

Field Reports, Morse Code, News, Portable, POTA, QRP, Videos

Gazebo Portable! A quick hike and speedy QRP POTA activation with the Elecraft KX2 and a 28.5′ random wire

6 Comments


On the morning of Friday, February 3, 2023, I wanted to fit in a quick hike and activation as I made my way back to the QTH.  Tuttle Educational State Forest (K-4861) is my go-to when I want to hike and play radio but don’t have enough time to fit in a proper SOTA activation.

That morning, the park was very quiet–mine was the only car in the parking lot. This being an educational state forest, they tend to get large groups of visitors all at once (typically, bus loads of school kids). In the winter, however, the park is quiet because their restroom facilities and water points are all winterized.

I grabbed my SOTA pack–which contained my Elecraft KX2 field kit, Tufteln/N0RNM folding knee board, and a throw line–then hit the trails!

Although it was a windy day, I headed to the gazebo at Tuttle (one I’ve used for activations in the past) which is on a hill and has a brilliant view of Grandfather Mountain.

Trust me, Grandfather Mountain is out there, my iPhone just can’t easily capture it:

The only issue with the gazebo is that the trees behind it are short and very dense with branches. In the past, I’ve launched a line over the top of the tree, but it’s not easy because then there’s always the possibility your throw weight will land on the roof of the gazebo. You also need a 10oz or heavier throw weight on trees like this, else risk getting your line caught in the tree.

There are a number of pines immediately behind the smaller ornamental trees, but to get to those, I’d need to lay my feedline across a service road the park staff use regularly, so that’s a no-go. Continue reading Gazebo Portable! A quick hike and speedy QRP POTA activation with the Elecraft KX2 and a 28.5′ random wire →

Antennas, News, POTA, QRP, SOTA, Videos

Video: What are the differences between the Elecraft AX1 and AX2? Should you buy one?

15 Comments
The Elecraft AX1 paired with the KX2.

During the months of January and February 2023, I’ve given my Elecraft AX1 a thorough workout. As I mentioned in a previous post, I thought it might be fun to take the AX1 out on a good 30 days worth of activations.

Turns out, I’ve had such brief windows of opportunity to play radio recently, the AX1 and now AX2 have been valuable tools in my field kit. They are, no doubt, the quickest-to-deploy and most portable antennas in my collection.

The Elecraft AX2 paired with the KX2.

If I only have a 20 minute window to squeeze in a quick park activation, the AX1 and AX2 make a valid POTA activation–with 10 logged contacts– a reality.

I originally purchased my Elecraft AX1 in the spring of 2020 and have used it extensively since then. In January 2023, I finally caved in and purchased the most recent addition to the AX family, the mono-band AX2.

Elecraft AX1 vs. AX2

Since I’ve been publishing numerous field reports recently using the AX1 (with more to come) and since Elecraft has included both the AX1 and AX2 in their February 2023 Specials, I’ve received questions from readers asking:

  1. “Should I buy an AX1 or AX2–?”
  2. and “If so, which one should I buy? What are the differences?”

At first, I simply pointed readers to the concise comparison guide that Elecraft publishes on their website (linked below).

I realize, though, that there are characteristics of each antenna that you might only discover after actually using them in the field.

I decided to make am unedited video–based on a few notes–not only describing the differences and similarities of the AX1 and AX2, but also if either would potentially benefit you as a field operator or traveler.

One quick note about resonance…

One point I touch on in the video is that both the AX1 and AX2 antennas are designed to be mostly resonant on 20 meters.

Small verticals like the AX1 and AX2, that use coils to electrically “lengthen” the antenna, have a higher Q than, say, a large aperture quarter or half wave antenna. In practical terms, this means that the window of resonance is narrow and more fickle than, for example, an end-fed half-wave.

A lot of factors can affect the SWR on higher-Q antennas like the AX1/AX2 including:

  • the type of terrain,
  • height off the ground,
  • length of counterpoise,
  • configuration of counterpoise,
  • and, most notably, the operator’s own body capacitance.

You may find that the AX2, for example, is natively resonant on 20 meters at one location, but isn’t at another location. This is quite normal. It’s also the reason why Elecraft states that both antennas are designed to be used with an ATU.

If you are pairing the AX1 or AX2 with a radio that doesn’t have an ATU (or you can’t use an external one), then you might consider making a simple capacity hat. Check out this field report and video where I paired the AX1 with the IC-705 and used a capacity hat to sort out the SWR.

Video

As with all of my videos, this one is unedited and commercial-free. If you’d like to skip through the video to the parts you might find most relevant, simply hover your mouse over the YouTube time line and click on the chapter indicated:

Click here to view on YouTube.

Another note here: I have no affiliation with Elecraft, but pushed this article and video to the front of the line to help those who are consider taking advantage of Elecraft’s  AX1/AX2 February 2023 Package Deals.

I hope you find the video helpful. I’ll try to answer any other questions you might have in the comments of this post.

Resources

Thank you

I hope you enjoyed this comparison video.

I’d also like to send a special thanks to those of you who have been supporting the site and channel through Patreon and the Coffee Fund. While certainly not a requirement as my content will always be free, I really appreciate the support.

Cheers & 72,

Thomas (K4SWL)

Field Reports, Morse Code, News, Portable, POTA, QRP, QRP Radios, SSB, Videos

Taking the Xiegu G106 on its maiden POTA activation!

12 Comments

Last year (May, 2022), Xiegu announced a new compact field radio that would be added to their line of transceivers: the Xiegu G106.

As I was capping off my summer in Canada (August, 2022), Radioddity started shipping the G106. Radioddity had me on their list of folks to send a loaner G106 to, but I didn’t have time to even look at the radio I was so busy upon my return, so didn’t immediately request it.

I did watch, however, K8MRD’s initial review and updated review of the G106. It was less than stellar [understatement alert!] but more than relevant to me because Mike shipped his second unit to me on behalf of Radioddity.

I connected that G106 to a dummy load, checked the transmitted signal, and it simply didn’t look very clean. It looked worse than it did when Mike checked it only a couple weeks prior.

I shared my results with Radioddity, told them I didn’t feel comfortable putting it on the air for testing in the field, and they asked to have that unit returned and checked out.

Updated G106

Fast-forward to January 2023 when I was once again contacted by Radioddity to see if I would like to field test an updated G106. I was happy to do so, in fact, because I was curious if the whole G106 experience had improved.

In the spirit of full disclosure: keep in mind that Radioddity is a Xiegu retailer/distributor–they are not the manufacturer nor are they owned by Xiegu. They are a sponsor of QRPer.com, but have no say in what I post nor any sort of editorial input. Indeed, this is always a condition of sponsorship from day one.

To Radioddity’s credit, some of my most critical reviews have been of products they’ve sent me on loan (especially the GSOC).  They take criticism on the chin and keep on moving forward. This is why they are still a sponsor and I like working with them. They understand that I call it like it is and stand by what I publish.

This G106 has been sent to me on loan for a few weeks to review. I plan to take this unit on a number of activations and pair it with a variety of antennas and accessories.

Very early impressions

I will eventually publish a full review of the G106 (likely in The Spectrum Monitor magazine first) once I’ve put in a lot more field and shack hours with the G106. In the activation video, below, I do make a lot of comments about the radio–thinking out-loud–so if you’re considering purchasing the G106, you might at least listen to a few of my initial impressions.

I will say this: for a modern SDR-based transceiver, it’s pretty bare-bones. It lacks a number of features I assumed it might have despite the incredibly affordable $320 US price point:

  • No SWR meter
  • No Power meter
  • No CW or Voice message memories
  • No RF gain control
  • No AGC control
  • No dedicated headphone audio output

But, again, it has more features than many of the bare-bones CW-only QRP transceivers out there, so for the price perhaps expectations should simply be in check–?

Zebulon B. Vance Birthplace (K-6856)

On Tuesday, January 31, 2023, I took the G106 on its maiden POTA activation to K-6856.

The G106 doesn’t have a built-in ATU (which I would never expect at this price point) so I decided to pair it with a resonant antenna. Since it was a very rainy day and the area/ground where I tend to deploy my wire antennas at Vance was squishy and soft, I opted to deploy my Chelegance MC-750 next to the picnic shelter. Continue reading Taking the Xiegu G106 on its maiden POTA activation! →

Accessories, Antennas, Field Reports, Morse Code, News, Portable, POTA, QRP, QRP Radios, Videos

New Penntek TR-35 Field Kit, Canine Welcome Party, & Brilliant 20 Meter POTA Conditions!

9 Comments

There are few things that make me happier than radios and pets.  On Saturday, January 7, 2023, I got copious amounts of both.

On the way back to the QTH, I stopped by Table Rock Fish Hatchery (K-8012) for a nice, leisurely POTA activation.

En route to Table Rock I gave some though to the antenna I might deploy. In the end, I decided I’d once again set up the Chelegance MC-750.

There was no question which radio I’d use: it’d be the brilliant Penntek TR-35 packed-up in its new field kit!

Table Rock Fish Hatchery (K-8012)

Table Rock Fish Hatchery isn’t open on Saturdays, but that really isn’t a problem because the picnic area where I set up shop is open 24/7.

And the best part about Table Rock? The welcoming committee…

These two dogs are so incredibly sweet and always a highlight of activating Table Rock. You may have seen them in my previous field reports and videos. Continue reading New Penntek TR-35 Field Kit, Canine Welcome Party, & Brilliant 20 Meter POTA Conditions! →

Field Reports, Morse Code, News, Portable, POTA, QRP, Videos

Pairing the Penntek TR-45L and Chelegance MC-750 on a swift POTA activation

6 Comments

Friday, January 6, 2023, was a beautiful day and my route took me within 10 minutes of South Mountains State Park (K-2753).

Of course, I had to activate it!

In truth, I had only a short window to do the activation, but I knew it would be seriously fun.

I’d packed my Penntek TR-45L and Chelegance MC-750 for the trip and was looking forward to pairing the two.

My TR-45L actually has the built-in Z-Match manual antenna tuner, but I wanted to, once again, configure the MC-750 as a resonant antenna (much like I did in my previous activation).

I also had my new VK3IL pressure paddle along for the ride and wanted to see how nicely it might work with the TR-45L.

If I’m being honest, it was a bit strange not to use a wire antenna at this particular park because South Mountains has some very large old-growth trees that are ideal for hanging antennas.

That said, I also had my choice of spots to deploy the MC-750 vertical. Continue reading Pairing the Penntek TR-45L and Chelegance MC-750 on a swift POTA activation →

Accessories, Field Reports, Kits, Morse Code, New Products, News, Portable, POTA, QRP, QRP Radios, Reviews, Videos

New Year’s Day POTA: New VK3IL Pressure Paddle, New FT-817/818 Narrow Filter, and New TPA-817 Pack Frame!

6 Comments

I try to start each year by doing a POTA or SOTA activation on New Year’s Day.

POTA actually issues a certificate for completing an activation on New Year’s Day so there are typically loads of activators and hunters working the bands. It’s an ideal time to play radio.

This year, we had a number of family activities on New Year’s Day, but I made a little time to fit in an activation during the late afternoon at my most accessible spot on the Blue Ridge Parkway: the Southern Highland Folk Art Center.

As with my last activation, I suspected I would be operating in the dark, so I brought my LED lantern along for the ride.

Although not intentional, this New Year activation had a lot of new-to-me stuff involved!

New VK3IL Pressure Paddle

The prior evening–on New Year’s Eve–while my wife and daughters were watching a classic movie movie marathon, I used the time to heat up the soldering iron and work through a few kits and projects that had been sitting on my desk.

One of those projects was a Pressure Paddle designed by David (VK3IL).

Michael (G0POT) sent me the Pressure Paddle circuit board and heat shrink via Andy (G7UHN) several months prior. [Thank you so much, fellas!]

To my knowledge, the VK3IL Pressure Paddle isn’t available in complete kit package, but it’s quite easy to source everything yourself.

On his website, David provides the Gerber files you’ll need in order to purchase the circuit boards from your favorite manufacturer (I’m a huge fan of OshPark here in the States).

Next, you simply need to order the components. Here’s the list assuming you’re using DigiKey:

  • Quantity of 2: 732-7579-1-ND (CAP CER 10000PF 10V C0G/NP0 0805)
  • Quantity of 2: BSS806NH6327XTSA1CT-ND (MOSFET N-CH 20V 2.3A SOT23-3)
  • Quantity of 2: 311-470KCRCT-ND (RES 470K OHM 1% 1/8W 0805)
  • Quantity of 2: 1738-SEN0294-ND (RP-C18.3-ST THIN FILM PRESSURE S)
  • Quanity of 1: Three conductor wire with a (typically) 3.5mm plug (note that I had one of these in my junk drawer)

Keep in mind: the components are surface-mount. If you’re not used to working with SMD components (ahem…that would be me) I suggest buying a few spares of each in case you lose or damage one or more during the build.

It also helps to cover the finished board in heat shrink not only to protect the board and make it easier to grip, but most importantly (if you’re me) hide your electrically-sound yet unsightly surface mount soldering job.

The build might have taken me 20 minutes.

New FT-817ND Narrow CW Filter

Some time ago, I purchased a second FT-817ND with the idea of doing full-duplex satellite work. I later realized I could be taking the second FT-817ND out to the field more often if I simply had another narrow CW filter installed, so I built one.

This New Year’s Day activation was actually the first time I’d taken this particular FT-817ND and its new narrow filter out to the field!

New Armoloq TPA-817 Pack Frame

Earlier this year, I also decided that I wanted to outfit my 2nd Yaesu FT-817ND with an Armoloq TPA-817 pack frame. The idea was to experiment with building a rapid-deployment field kit around it.

This is actually one of the big projects I’m working on in 2023. I’ve yet to sort out the antenna mount I’d like to use with this frame based on how I plan to deploy it. Continue reading New Year’s Day POTA: New VK3IL Pressure Paddle, New FT-817/818 Narrow Filter, and New TPA-817 Pack Frame! →

News, QRP Radios, QRPer Notes, Reviews, Videos

QRPer Notes: TR-45L Overview by K2OM, 8 Year Old Isabella Works the ISS, and POTA with the CW Flea

2 Comments

Because I receive so many tips from readers here on QRPer, I wanted way to share them in a concise newsletter format.  To that end, welcome to QRPer Notes, a collection of links to interesting stories and tips making waves in the world of radio!

K2OM’s overview of the Penntek TR-45L (YouTube)

Click here to view on YouTube.

Tony (K2MO) adds, “I suggest adding this link to your TR-45L [videos in the field]”

Isabella Payne’s amateur radio contact with NASA astronaut Kjell Lindgren on the ISS (YouTube)

Click here to view on YouTube.

POTA with the CW Flea/Belka twins (AE5X)

Check out this short article by John (AE5X) where he uses a CW Flea transmitter and Belka-DX receiver for a QRPp POTA activation. I love what John’s done here and I think I may have to give the CW Flea a go too someday.

Here’s the video that accompanies his blog post:

Field Reports, Morse Code, News, Portable, POTA, QRP, QRPp, Videos

QRPp: Activate a park with ⅒ of a watt–? I had to at least try!

33 Comments

In my last published field report, you might recall that I successfully activated a park using 500 milliwatts or ½ of a watt. I was so surprised by the results of using this QRPp power level I immediately made plans to push the power level even lower during my next activation.

Let’s face it, I was drunk with a lack of power!

QRPp

After my last field report, there were quite a few questions about the term QRPp and what it means. To be honest, I’m not sure if there’s an “official” definition, but here’s what is widely accepted as QRP power categories:

  • QRP: 5 watts to 1 watt (for some contest 10 watts = SSB QRP)
  • QRPp: Less than 1 watt to 100 mw
  • QRPpp: Less than 100mw

I don’t own a field radio that allows me to lower the output power to QRPpp levels. In fact, few of my radios actually allow me to lower power below one watt.

 

My Elecraft radios, however, do allow me to lower power output to as low as 0.1 watts or 100 milliwatts.

The plan

On Wednesday, December 7, 2022, my travel schedule shifted and it opened up the entire afternoon to play radio.

A rarity indeed!

It was very rainy and foggy that day and I didn’t have my ENO rain fly with me, so I decided to visit a park with a good picnic shelter to keep me, an my gear, nice and dry.

Fort Dobbs State Historic Site (K-6839)

I had four park options with covered picnic shelters within a 45 minute drive. I decided that I would try to activate Fort Dobbs State Historic (since it had been a couple months since I’d visited) and Lake Norman State Park would be my back-up plan.

Fort Dobbs is a small park, so I called in advanced and asked for permission to do the activation and also asked if their picnic shelter was reserved.

The rangers there know me, so the phone call was pretty quick–no need to explain POTA nor my motivations. They told me that on rainy/foggy December days they have so few guests that I was welcome to use the picnic shelter or even the entire park if I wished (perhaps an ideal time to erect a Rhombic antenna–okay, just kidding!).

The Dobbs park rangers an volunteers are the best!

Setting up

On the way to the site, I decided that I would deploy my MM0OPX end-fed half-wave I’d cut for 40 meters.

I needed to make the most of my 100 milliwatts, so I figured the MM0OPX EFHW would be the best antenna for the job. Continue reading QRPp: Activate a park with ⅒ of a watt–? I had to at least try! →

Field Reports, Morse Code, News, Portable, POTA, QRP, QRP Radios, QRPp, Videos

POTA with 500 milliwatts CW and 10 watts SSB using the Elecraft KX2 and PackTenna Random Wire combo

17 Comments

I’d like to start this field report with a side story. I’ll keep this reader anonymous since I haven’t asked for permission to post his story (although I’m certain he wouldn’t mind!):

A QRP Christmas Gift

Yesterday, I was contacted by a reader who had just received an amazing gift.

On Christmas morning, his wife presented him with a tiny wrapped box and inside there was a small note:

“Get yourself a great field radio. You have Carte Blanche!” 

What an amazing gift…right–?! She literally said Carte Blanche!

Evidently, she is familiar with my YouTube channel  (poor thing) because he often watches my activation videos on their living room TV. [Between us, I’m a bit surprised she still loves him after subjecting her to my videos.]

She told him, “Run your choice by Thomas before ordering.”

The funny bit? He approached me with this very question in November as he plotted a 2023 radio purchase. He couldn’t decide between the Icom IC-705 and the Elecraft KX2.

He wrote yesterday to tell me that he placed an order for a new Elecraft KX2 with all the trimmings; Elecraft’s KX2 “Shack-In-A-Box” package plus a set of KXPD2 paddles.

The KX2 is back-ordered due to parts availability, so he won’t receive his unit for several months, most likely.

Based on his operating style, I think he chose wisely. The IC-705 is a benchmark field radio, but he was looking for something that he could pair with a random wire antenna (the ‘705 lacks an internal ATU) and that would be easy to use on SOTA activations. He’s new to CW as well and loved the fact that the KXPD2 paddles attach to the front of the KX2.

Why do I mention this story? Because it’s not only fresh on my mind, but it’s the same radio and antenna I used during an activation on Thursday, December 1, 2022.

Tuttle Educational State Forest (K-4861)

As I pulled into Tuttle’s parking area that day I had a tried-and-true field radio kit pairing in my pack: my Elecraft KX2 and PackTenna 9:1 Random Wire antenna.

As I mention at the start of my activation video (see below), with the Elecraft KX2 and a random wire, I could easily activate all of the summits, parks, and islands I desire. It’s such an effective, flexible, and portable combo.

QRPp

To shake things up, I decided to knock the output power of the KX2 down to one half of one watt–500 milliwatts–at least for the CW portion of my activation.

Why not?

Plus, I don’t think I’ve ever validated a POTA activation with 1/2 of a watt, so it might make for a fun challenge! Continue reading POTA with 500 milliwatts CW and 10 watts SSB using the Elecraft KX2 and PackTenna Random Wire combo →