Category Archives: Morse Code

Antennas, Field Reports, Morse Code, News, Portable, POTA, QRP, Videos

Rainy Day POTA: Setting up the Chelegance MC-750 Vertical Antenna Inside a Picnic Shelter?

7 Comments

On Thursday, April 27, 2023, it was pouring rain, so the perfect time for a little POTA, right–?

Right!

Actually, I had an idea: in the past, I’ve been known to play POTA under the roof of a picnic shelter on rainy days. I’ve even been known to use my AX1 antenna inside the shelter, under a metal roof. Quite a few times, actually.

Of course, it’s not optimal to operate with your antenna under a metal roof, but with POTA? Let’s just say that you can get away with a lot of less-than-optimal antenna deployments.

That’s the benefit of being the DX!

The MC-750 Tripod

An in-the-shelter activation was also the perfect opportunity to test the new Chelegance tripod that fits both the MC-750 and the JPC-12.

A number of readers have reached out asking about this tripod, so when Jesse at Chelegance asked if I’d like to test it, I agreed to do so.

To be clear, he sent this to me at no cost for evaluation. It’s actually quite affordable ($30 on the Chelegance website, $40 at DX Engineering, for example) so purchasing it would have been easy enough, but Jesse also wanted me to evaluate their new FT-818 ATU, so he sent both at the same time (you’ll see the ATU in a future field report).

The tripod feels very sturdy and is simple to deploy. It’s also a little heavy, so keep that in mind if you plan to pack it in for a long SOTA hike.

A number of you have purchased this tripod and have only had positive comments. I now see why.

I speak about this in more detail in the activation video below.

Lake Norman State Park (K-2740)

I decided that it had been too long since I had activated Lake Norman State Park, so I hopped in the car and headed to Troutman, NC! Lake Norman has a number of picnic shelters and covered areas thus a very safe bet.

It was a rainy day so, of course, I pulled into the Lake Norman picnic area only to find one other car there. In fact, by the time I had taken my backpack to the picnic shelter, that other park visitor appeared at a trailhead, hopped in her car, and left.

The picnic shelter sign wasn’t set to “reserved” either, so it looked like I had a green light to claim it for POTA! Continue reading Rainy Day POTA: Setting up the Chelegance MC-750 Vertical Antenna Inside a Picnic Shelter? →

Field Reports, Morse Code, News, Portable, POTA, QRP

Postcard Field Report: Pairing the Elecraft KX2 and MM0OPX EFHW to face dubious propagation

2 Comments

Welcome to another Postcard Field Report!

I’m still in Dayton after Hamvention weekend, but didn’t want to skip my field report and activation video, so a hope you enjoy the slightly shorter report below:

Zebulon Vance Historic Birthplace (K-6856)

On Tuesday, April 25, 2023, I once again stopped by my weekly POTA spot, the Vance Birthplace.  By mid-May, I will no longer be passing by this excellent little POTA site on a weekly basis, so my activations here will be much less frequent. A shame because I do love this site and its staff!

For this particular activation, I’d planned to test my almost perfectly trimmed QRPguys Tunable EFHW antenna, but I left it at home. Not a problem, actually, because after this activation, I discovered it’s not as resonant as I’d like on the 20, 15, and 10 meter bands, so I may tinker with the toroid windings a bit–perhaps removing one.

Instead, I deployed my MM0OPX EFHW which I thought was actually a great choice considering propagation had been incredibly unstable the previous few days.

Since I also had my Elecraft KX2, I knew I could use its built-in ATU to move to non-resonant bands like 17 and 30 meters.

This activation video is a long one because I had quite a lot of time to play radio and, frankly, it was nice taking things at a casual pace.

After deploying the antenna (twice!) I set up the radio, connected my Begali Traveler, and hopped on the air! Continue reading Postcard Field Report: Pairing the Elecraft KX2 and MM0OPX EFHW to face dubious propagation →

Antennas, Field Reports, Morse Code, Portable, POTA, QRP

Lakefront QRP and Bags Galore!

7 Comments

by Vince (VE6LK)

(As is my usual, this article is full of hyperlinks – click on as many as you wish)

The days leading up to my first Hamvention trip were a bit scattered to say the least. While I was pretty sure I remembered everything and even documented most of my gear on Twitter, I would only discover that the bag I intended to carry my gear around in was too small once I arrived in VE3-land. The very next morning I was shopping in several big box stores trying to find the perfect bag only, hours later, to discover an Army Surplus Store across the street from my activation and after the activation concluded.

Holey Moley lookit all the molle and backpacks!
Thomas’ reaction upon seeing this photo was predictable 😉

Anyways, the short summary on the shopping trip was that I figured out a way to get me through the trip without spending a fortune.

The day’s goals were to make a simple activation at a park near the family where we were visiting east of Toronto. Before travelling I scoped out POTA entities that were nearby and had not yet received a CW Activation thus putting me closer to my CW goal for the year.

I landed up at Lakefront West Park VE-1480 in Oshawa Ontario.  A recreational trail winds along the waterfront of Lake Ontario about 100m away, and eight baseball diamonds are the central feature here. Given the lack of trees at the park, and that I do not have a small mast on this trip for my EFHW -although I may remedy that at Hamvention- I chose to deploy my Comet HFJ-350M with some simple ground radials. With the solar reports showing SFI 149, SSN 134, A 19 and K 2, I chose 20m as the band for the day. 5W on my KX3 into a ground mounted vertical with one each 66′ and 33′ radial wires would have to be enough.

DX Toolbox on iOS – click for App Store link

I have the full Comet HFJ-350M kit including the bag to carry all the pieces in. I also have a ground stake from eBay that comes with a 90 degree SO-239 adapter allowing me to attach feedline on the side and the antenna on the top. Not including the ground radials, the whole kit rolls up reasonably small, about 3″ in diameter and 12″ long. Continue reading Lakefront QRP and Bags Galore! →

Field Reports, Morse Code, News, Portable, POTA, QRP

Postcard Field Report: Pairing the Elecraft KX2 and Packtenna 9:1 Random Wire at Holmes Educational State Forest

6 Comments

Well, I’m off to Hamvention in two days and trying to prepare for the trip. There’s so much to do!

If you are attending Hamvention this year, I’d love to meet you. Stop by the Ham Radio Workbench/Halibut Electronics table (#3011) and introduce yourself.

Since my travels this week are imposing on my field report time, I’m going to share another, shorter, Postcard Field Report. I hope you enjoy it:

Holmes Educational State Forest (K-4856)

On Friday, April 21, 2023, I had a short window of time to fit in an activation while my daughter was attending her high school robotics class.

Her robotics class lasts nearly two hours, but it’s 30 minutes away from all parks and summits, so traveling to/from a site takes about one hour.

I didn’t care because I had a particular park in mind: Holmes Educational State Forest (K-4856).

It had been one year almost to the day since I last activated Holmes.

I arrived on site around 13:30 local, and there were only a few other people floating about.

I walked up the main loop path in search of a good picnic table that was out of the way and with ample trees about.

In a pinch, any of the picnic table sites would have sufficed, but since I practically had the whole park to myself, I could afford to be picky!

The sign above reminds me that Educational State Forests in North Carolina have hours that vary by season and truly cater to school groups, thus are primarily open during the school day. Always check those hours before embarking on a journey to this type of park.

One great thing about our Educational State Forests is that they almost always have a nice covered picnic shelter for school groups. If they’re not occupied, they’re perfect for POTA activators who’d like to escape heavy rains. You can see the one at Holmes off in the distance in this photo:

I ended up choosing the same picnic table I used last time–it had more room around it to set up an antenna without crossing the path.

I didn’t have a lot of time to set up and operate, so I chose to use one of my speedier deployment combos: the Elecraft KX2 and PackTenna 9:1 Random Wire. Continue reading Postcard Field Report: Pairing the Elecraft KX2 and Packtenna 9:1 Random Wire at Holmes Educational State Forest →

Field Reports, Morse Code, News, Portable, POTA, QRP, Videos

Postcard Field Report: Pairing my new-to-me Palm Pico with the TX-500 at K-6856!

8 Comments

I finally snagged one.

In the world of lightweight, super-compact QRP radio kits, there is one key that is, essentially, a legend: the venerable Palm Pico.

The Palm Pico has a stellar reputation because it’s super lightweight, can retract into its housing to protect it in transport, and can be directly attached to various radios with a specific mounting assembly or via Velcro or magnets.

The Palm Pico has been out of production for some time now and, they’re so highly desired, they often fetch the original purchase price or even higher on the used market. Truth is, so few Pico owners are willing to sell that very few of these keys ever enter the used market.

I was very lucky, indeed, when a long-time Patreon supporter reached out and offered to sell me her Palm Pico and Palm Mini paddles along with a KX2 mounting assembly. She had noticed how my eyes lit up when Josh (KI6NAZ) showed me his Palm Pico paddle on an HRCC Livestream in February.

The price she offered was amazingly low. She told me that she favored some of the other keys in her collection and wanted to give me the opportunity to own them. They were like-new with all original boxes and accessories.

How could I resist? I’m so grateful.

I really look forward to using the Palm Pico and Palm Mini this year. I’m especially eager to hook up the Palm Pico directly to the KX2 with its custom mounting bracket.

I decided to take my Palm Pico on a maiden POTA activation at the Vance Birthplace on April 18, 2023.

Postcard Field Report

I’ve got a load of videos in the pipeline and to keep from falling behind publishing them, you’re going to see more of my slightly shorter “Postcard Field Reports” for the next couple of weeks during my travels.

These postcard reports contain all of the core information, just less wordy.  (In theory!)

Zebulon Vance Historic Birthplace (K-6856)

I arrived at the Vance Birthplace and checked in quickly with the park staff. There were no picnic shelter reservations that day but there was a family with children eating a picnic lunch when I arrived. Continue reading Postcard Field Report: Pairing my new-to-me Palm Pico with the TX-500 at K-6856! →

Field Reports, Morse Code, News, Portable, POTA, QRP, Vintage

Postcard Field Report: Pairing the Elecraft KX3 and Tufteln Random Wire

3 Comments

Believe it or not, the 2023 Hamvention and Four Days In May is only ten days away at time of posting.

Where in the world did the time go–?

If you’re going to Hamvention, I hope to meet you there. When I’m not floating around, I’ll be hanging out at the Ham Radio Workbench/Halibut Electronics table: 3011.

I’m super excited about attending, but I’ve so much to prepare in advance. Every day between now and then is planned out to the max with family activities and projects.

That, and being an introvert (this might surprise some of you), I have to mentally prepare myself for hanging out with 30+ thousand other human beings. I’ll need ten days for that alone. If I appear tired at Hamvention or FDIM, you’ll know why! Ha ha!

Postcard Field Report

I’ve got a load of videos in the pipeline and to keep from falling behind publishing them, you’re going to see more of my slightly shorter “Postcard Field Reports” for the next couple of weeks during my travels.

These postcard reports contain all of the core information, just less wordy.  (In theory!)

Tuttle Educational State Forest (K-4861)

On Wednesday, April 5, 2023, I had a bit of time in the early afternoon to do a POTA activation. Tuttle Educational State Forest was low-hanging fruit as my errands that day took me within a stone’s throw of the park.

I arrived a bit before noon and took some time to record a Hike and Talk video (which will be published in the next couple of weeks).

After the hike, I set up my Elecraft KX3 and paired it with my Tufteln End-Fed Random Wire antenna. Continue reading Postcard Field Report: Pairing the Elecraft KX3 and Tufteln Random Wire →

Field Reports, Morse Code, News, Portable, POTA, QRP

Picnic Blanket POTA on a beautiful spring day at South Mountains State Park

5 Comments

Monday, April 10, 2023, was a spectacular day weather-wise. Spring was out in all its glory making it impossible to stay indoors.

That day, I was driving back to the QTH and made a little detour to the Clear Creek Access of South Mountains State Park.

According to my calculations, I had about one hour to play radio. I did have a firm deadline to hop off the air because I needed to take my daughter to a tennis lesson that afternoon. Couldn’t be late to that!

South Mountains State Park (K-2753)

As I pulled into the Clear Creek Access parking area, I noticed a family of five grabbing picnic supplies from their car.

For the first time ever, there was going to be competition for the one single picnic table at the Clear Creek access!

Actually, there would be no competition at all because there was no way in the world I’d ever take over the picnic table when a family could use it. 🙂

They had a much better reason to use a picnic table than me. Frankly, I was super pleased to see someone else besides a POTA activator using that table. I get a real thrill out of seeing families enjoying our public lands.

Plus, I don’t need a table to play POTA so it was a brilliant excuse to pull the picnic blanket out of the car and set up under a beautiful antenna support…I mean, tree.

For this activation, I decided to use my Penntek TR-45L and, for an antenna, two 28 foot lengths of wire.

Continue reading Picnic Blanket POTA on a beautiful spring day at South Mountains State Park →

Accessories, Field Reports, Grab And Go, Morse Code, News, Portable, POTA, QRP, QRP Radios, Reviews, Videos

POTA Field Report: Testing my CP Gear Tactical Aircrew/Pubs Bag with FT-817ND and Armoloq TPA-817 Pack Frame

7 Comments

Last year, during a Black Friday sale, I took a calculated risk and purchased a bag I hoped would accommodate my Yaesu FT-817ND that has been outfitted with an Armoloq TPA-817 Pack Frame.

CP Gear Tactical Aircrew/Pubs Bag

Rod (VA3ON) first introduced me to CP Gear Tactical–a  military pack manufacturer based in New Brunswick, Canada.

I’d had their their Aircrew/Pubs Bag with Padded Tablet Pocket on my wish list since the Ham Radio Workbench podcast episode where we talked about backpacks and pouches. CP Gear Tactical manufactures a wide variety of gear primarily for the Canadian military market. Everything is made either in Canada or the US (or both).

I contacted CP Gear Tactical shortly after outfitting my FT-817 with the TPA-817 pack frame. I measured the frame carefully and asked if the interior padded pocket (which is actually designed to hold a tablet–might fit my radio.

I never heard back from them. I could have called them, but on Black Friday, when it was on sale for 20% off and free shipping, I decided to throw caution to the wind and simply purchase it. My total price in USD was something like $62 shipped.

As soon as I opened the CP Gear pack, the first thing I did was check to see if the FT-817 with pack frame would fit in the interior pocket.

Much to my surprise, it fit it perfectly!

Indeed, it’s as if the pocket were specifically designed to accommodate the FT-817ND/TPA-817 combo.

Even the middle Velcro strap fits precisely in the middle of the radio between the pack frame side extensions. The strap holds the rig securely; once, I accidentally fumbled while holding the bag and even though it was upside down, the FT-817 remained securely inside. The strap held it in place.

The bag has loads of room inside. In fact, you can very easily transform it into a fully self-contained field radio kit.

I actually give a small tour of this pack in my activation video below, so if you’d like to see some of the exterior pockets, I would encourage you to check it out!

Zebulon B. Vance Birthplace (K-6856)

On Tuesday, April 11, 2023, I once again popped by the Vance Birthplace for a leisurely POTA activation–I thought this activation, in particular, would be a good one to test my new Aircrew/Pubs bag! Continue reading POTA Field Report: Testing my CP Gear Tactical Aircrew/Pubs Bag with FT-817ND and Armoloq TPA-817 Pack Frame →

Accessories, Articles, Field Radio Kits, Field Reports, Grab And Go, Morse Code, News, Portable, POTA, QRP

Testing my new Headrest QRP POTA Field Kit!

8 Comments

I love field radio kits.

If you’ve read my “Anatomy of a Field Kit” series, you’ve likely gathered that field kits are a bit of an obsession. [Yeah, understatement alert!]

My field kits roughly fall into two main categories: modular and fully self-contained. My modular kits are ones where components like the battery, antenna, throw line, key, and radio are in separate pouches and can easily be combined to make a complete station before I leave for an activation.

My fully self-contained kits are ones that quite literally have everything needed to perform a park or summit activation in one pouch or box. A good example that I’ve documented here is my MTR-3B field kit.

For more on this, again, check out my “Anatomy of a Field Kit” series.

Vehicle kit

If you’re a devoted park and/or summit activator, I think it’s important to keep a dedicated kit kit in your car at all times. Why?

  • It’s ready to grab for impromptu activations
  • It’s handy in case of road-side emergencies in remote areas
  • It’s always  accessible to demonstrate amateur radio to those who are curious
  • It’s always always there for those times when you hadn’t planned to play radio, but the opportunity presents itself

I always have a full radio kit in my Subaru and over the years, I’ve changed and adapted it. For the most part, though, it’s been located in the trunk/boot and lives with anything and everything else I keep back there. Sometimes, it’s in the way when we need to fill that trunk space with family items for a trip or when we’re hauling things around town. Other times, it’s floating/sliding around freely in the back.

On long family trips, I’ve been known to store radios under the floor, but it’s a true hassle to remove them because I have to remove anything in the trunk before lifting the floor.

Contraband I hid in the car during our two month Canada trip last year.

I’ve always wanted a way to store my kit in the car in a dedicated space. In the past, I’ve tried to make a kit that could fit under the driver’s seat–thinking that might be ideal–but there’s very little clearance under it and it’s difficult to remove.

Enter the BROG Headrest Pouch Kit

Before I placed my initial order for the Blue Ridge Overland Gear (BROG) Gadget Bag, I checked out other items on their website. One that immediately caught my attention was their Headrest Kit.

It consists of a Velcro panel that fits around a vehicle headrest and a pouch (or pouches) attach to it.

BROG caters to Overlanders and vehicle storage/organization is huge in that community. The headrest kit makes a lot of sense: it’s using space that’s accessible, doesn’t interfere with any passengers, is off the floor, and is otherwise underutilized!

The big questions, of course:

  1. would the pouch offer enough space to store an entire radio kit,
  2. and would the kit weight too much for the Velcro back to hold it in place?

I asked for the Headrest Pouch Kit ($47.99) to be sent with my Gadget Bag order.

BTW: Big thanks to BROG for giving me flexibility with this order. Since I had no experience with their gear, I asked that they send me a list of items and allow me to evaluate them, then pay (full price) for what I decided to keep. 

Would it work?

I knew I’d need to store a very small transceiver in this dedicated pack. A few could potentially fit the bill–namely the:

  • Mountain Topper MTR-3B
  • Venus SW-3B
  • QCX-Mini
  • TEN-TEC R4020

I eliminated the QCX-Mini from this list because it’s mono band (mine is set for 20M) plus, I really love the field kit I already designed for it. Same for the MTR-3B–the kit I built for it is now time-tested and I love it as-is. The R4020, while quite compact, is the largest in this group of wee rigs. Continue reading Testing my new Headrest QRP POTA Field Kit! →

Accessories, Field Reports, Grab And Go, Morse Code, News, Portable, POTA, QRP, Reviews, Videos

Field Report: BROG Gadget Bag Tour, New Anker Speaker, & Pairing the KX3 w/the MC-750 for Serious QRP POTA Fun!

29 Comments

On Tuesday, March 28, 2023, I packed my Elecraft KX3 and took it to the Zebulon Vance Historic Birthplace (K-6856) for a nice, relaxing, early afternoon POTA activation!

It had been a few months since I’d taken the KX3 to the field and it really does deserve some outdoor time because…well…I still think it’s one of the best HF field radios on the market.

I’m spoiled, though, because I also own a KX2 and it does 80% of what the KX3 does, is much smaller, and sports a very long-lasting internal battery. Because of this, my KX2 gets way more field time and the KX3–hooked up to a KXPA100–is my main radio in the shack.

When I make an activation video in the field, I like using a speaker rather than recording from the line out of the radio. Besides the extra post-processing, sometimes the line-out audio from left and right channels are out of phase from each other and end up cancelling each other out in YouTube videos if listening in mono. I recently learned how to fix this, but I find the whole process just adds *that* much more time to post-processing and I’m always pressed for time.

The Elecraft KX3 has a built-in speaker, but it’s pretty anemic. I almost always pair the KX3 with an external speaker to amplify the otherwise excellent KX3 audio for my activation videos.

On this particular day, I had a new speaker to try as well: an Anker Soundcore Mini. I purchased this speaker on the same day I posted Mike’s speaker search and review of the Soundcore Mini. Although I have a Sony SRS-XB12 portable speaker and love it, they’re no longer produced and the battery life isn’t quite as good as the Soundcore Mini (Anker states up to 15 hours per full charge).

This activation would give me an opportunity to really test the Anker Soundcore Mini in the field. In the end, it did a brilliant job.

I should note that I also brought my Blue Ridge Overland Gadget Bag (see above) to the field that day, so I include a little tour and overview of this pack in my activation video.

I did recently post a review of the BROG Gadget Bag here on QRPer as well.

Zebulon B. Vance Birthplace (K-6856)

As I mention in my activation videos, Vance is a small park and, unless you plan to operate from your car, there’s really only one good site to set up: in the picnic shelter. Thing is, if a school, club, or civic group is scheduled to meet that day, the picnic shelter will almost certainly be reserved for them.

Each time I activate Vance, I ask the park staff in advance if the picnic shelter is reserved and if it’s okay if I perform the activation. Fortunately, the shelter is reserved only about 20% of the time. On days when it’s reserved, I simply activate elsewhere.

On the 28th, I had the site to myself and the staff encouraged me to activate as long as I wanted to. Continue reading Field Report: BROG Gadget Bag Tour, New Anker Speaker, & Pairing the KX3 w/the MC-750 for Serious QRP POTA Fun! →