It was pouring rain, but I had a respectable three hour window to fit in a park activation while visiting my parents in the foothills of the NC mountains.
I had such an enjoyable experience pairing my Elecraft KX2 and AX1 antenna under a shelter at Tuttle Educational State Forest during a previous rainy day activation, I decided to revisit the same site.
Tuttle Educational State Forest (K-4861)
I knew I would likely be the only visitor at Tuttle that day; it was pretty cold and very wet.
Knowing rangers might not expect visitors on a day like this (keeping in mind this type of park caters to educational groups and are otherwise relatively quiet) I made a courtesy call to the park headquarters. I asked the ranger for permission to use their main shelter for an activation.
Thursday, October 28, 2021 was a wet, rainy day but I wanted to do a POTA activation on the way back to the QTH after having visited my parents for a couple nights.
I didn’t have a lot of radio gear with me on that trip, but I had the right gear: my Elecraft KX2 transceiver and AX1 antenna. If I could activate a park under a covered picnic shelter, I knew I would stay dry while playing radio.
There are only two parks within a reasonable detour that have covered picnic shelters: Lake James State Park and Tuttle Educational State Forest.
Lake James was the shortest detour, but they tend to be busier than Tuttle and last time I was there? Yeah, the picnic shelter was occupied.
Because I receive so many tips from readers here on QRPer, I wanted way to share them in a concise newsletter format. To that end, welcome to QRPer Notes, a collection of links to interesting stories and tips making waves in the world of radio!
On Thursday, October 7, 2021, I was driving back to the QTH and had a hankering to do an activation. There was only one problem…
Rain.
Lots of rain…
As I was driving on Interstate 40 west-bound, I passed through bands of rain producing torrential downpours; the kind that brings interstate traffic to a crawl. Weather-wise, this is not typically when I would contemplate a park activation. I did a quick mental inventory of what I had in the car. Turns out I had the Icom IC-705 and the Elecraft KX2.
I also had the Elecraft AX1 portable antenna. Having used the KX2/AX1 pairing under picnic shelters with success, it was a no-brainer what I’d use at Lake James.
Most North Carolina state parks have covered picnic shelters that are first-come, first-serve or can be reserved (at no small expense) for group gatherings. There’s a really nice large picnic shelter at the Catawba River access of Lake James State Park–in fact, I took shelter there earlier this year during an activation.
Anthony (K8ZT) works two 20M stations from the Sacramento platform.
Many thanks to Susan (WB2UQP) who shared this piece by Anthony (K8ZT) which was originally posted to the Elecraft KX forum. Anthony kindly gave us permission to re-post it here on QRPer.com:
AX1 Success Story
All year I have been taking part in State QSO Party Challenge with the goal of working all 45 events.
The problem was I would be on an Amtrak trip on the California Zephyr during the entire California QSO Party (ironically arriving at my destination in Emeryville, CA just after CAQP ended).
So my opportunities to get the two required contacts would be on one of the platforms during one of the Zephyr stops (usually around 5 minutes, but with a few 10-minute stops) so there would be no way to set up an antenna. I was using my Elecraft KX2 and purchased an AX1 for the trip.
My first opportunity was 10 minutes at Glenwood Springs, Colorado Station.
Using the KX2 and AX1 with counterpoise I was able to work three stations in CA on 20 Meter CW: K6XX, W6FRU, and N6TV.
During my next opportunity, now as an in-state station, from the Sacramento platform I worked two stations on 20 Meters:
W0BH in KS on CW, and K2KR in CO on SSB
-Anthony Luscre (K8ZT)
I love this, Anthony! Combining rail travel and radio? It can’t get better than that!
I also love this because it points out the advantage of compact radio setups like the KX2/AX1 pairing: they allow you the flexibility to operate in time frames and conditions other setups might not easily accommodate.
To think that you met your goal of working the State QSO Party from Amtrak platforms in 5 to 10 minute windows of time? Wow!
And it doesn’t even look like you’re breaking a sweat!
On Monday, October 4, 2021, I was set to have a lunch with my good friend, Taiyo, who happened to be in town from Japan. We decided to grab some take-out and meet at a picnic area halfway between my QTH and where he would be staying during his visit. Turns out, the Vance Birthplace (K-6856) fit the bill perfectly–especially since rain showers were in the forecast all day and Vance has a covered picnic area.
I didn’t have an activation in mind that Monday because my focus was on spending time with a friend I hadn’t seen in years, but I brought the KX2 field kit with the AX1 antenna…you know...just in case.
Radio time!
After running a number of errands in town and grabbing some take-out lunch from Whole Foods market, I still ended up arriving at Vance about an hour early, so I pulled the KX2 and AX1 out of the car.
On September 20, 2021, I had a full day planned in town. It was one of those days where my few errands and appointments were spread out across the day in such a way that driving back home between appointments made no sense. I knew I might have a bit of time to kill.
The big appointment holding me in town was recall service work on my Subaru that would take most of the day. The dealership reserved a loaner car for me.
That morning, I cleaned out my car (removing a couple of radios and antennas) and I packed a backpack with the supplies I’d need for the day; water, sandwich, laptop, and (fortunately) my Elecraft KX2 and AX1 antenna.
I would take this pack with me in the loaner car as I ran my other errands. I remember thinking that there was likely no possibility of doing an activation–it was rainy and I knew even getting set up at the service center might take an hour. I packed the Elecraft gear nonetheless. (Never leave home without a radio, I say!)
That morning, I drove to the Subaru dealership and–long story short–the service work had to be cancelled. While I wasn’t happy that I’d made the early morning trip to the dealership for nothing, this did essentially free up a good portion of my morning to play radio. Even though I had my own car for the day, I had completely emptied it of radio gear, so the KX2 and AX1 were truly all I had. Continue reading Elecraft KX2 and AX1: Seriously…how effectively can such a compact field kit work?→
The elastic straps inside the pouch keep the elements of the antenna organized and separated. They don’t hold the sections tightly in place, but they do the trick.
I store the two AX1 counterpoise wires (one for 40M, the other for 20/17) in its interior zipped pocket.
The Fatty pouch also stores a small Muji notepad and mechanical pencil (for logging).
I actually keep a logbook specifically for the AX1 because it’s so fun to see just how many miles per watt I’ve achieved with this pocket antenna.
I also like the clam shell opening.When I arrive on-site, I open the case and everything is arranged and prepared for assembly (which takes all of 2-3 minutes). Since every piece of the AX1 assembly has its own dedicated spot in the Fatty pouch, I can tell at a glance if I’ve forgotten something.
In the spirit of full discoure, you should know that besides being a radio enthusiast, I’m also a hopeless pack geek. I almost exclusively buy backpacks and travel gear from smaller manufacturers mostly located here in the USA. I support companies like Red Oxx, Tom Bihn, and Spec-Ops Brand to name a few. I have even helped pack companies with their designs and pre-production evaluations (much like I do for radio manufacturers).
Maxpedition is a US-based company that manufactures much of their gear in Taiwan (I believe). Although I originally purchased this Fatty pouch and two other Maxpedition pouches about six years ago, I can say their their quality and durability are superb. The zippers all work fluidly, seams are well-stitched, and I’ve never had one fail on me in any way. Their gear is more affordable than most of the packs I typically purchase.
I wish Maxpedition made a padded case that would fit my IC-705, Elecraft KX3, or even the Elecraft KX2 (although the Lowe Pro packs Elecraft sells seem to work well). I’ve never tested Maxpedition slings and backpacks, but I may give one a try soon. I would love input from any readers who are familiar with larger Maxpedition packs.
This Saturday (Jan 30, 2021), I had a small window of opportunity to perform a Parks On The Air (POTA) activation. My park options were limited because I needed to stay near my home and a store where I was scheduled to do a curbside pickup.
The only viable option–since time was a factor–was my reliable quick hit park.
The Blue Ridge Parkway (K-3378)
I plotted a quick trip to the Blue Ridge Parkway Folk Art Center which is centrally-located and, this time of year, there are few visitors.
But what radio take? It had been a couple of weeks since I used the IC-705 in the field, so I decided to take it and rely only on its supplied BP-272 battery pack.
My buddy Mike (K8RAT) had warned me only a few minutes before my departure that propagation was pretty much in the dumps. I’d also read numerous posts from QRPers trying to participate in the Winter Field Day event and finding conditions quite challenging.
Saturday was the sort of day that I should’ve deployed a resonant wire antenna and made the most of my meager five watts thus collect my required 10 contacts in short order.
And that’s exactly what I didn’tdo.
You see, a really bad idea popped into my head that morning: I had a hankering to pair the IC-705 with my Elecraft AX1 super compact vertical antenna.
This made absolutely no sense.
I tried to get the idea out of my head, but the idea won. I suppose, at the end of the day, I’m not about taking the easy path (and I’m obviously a glutton for punishment).
I was also very curious if the mAT-705 Plus external ATU could tune the AX1 on 40 meters. More on that later…
I arrived on site a few minutes before noon. Setup was fast–that’s the big positive about using the AX1.
Normally, I deploy the AX1 antenna with my KX2 or KX3 and simply attach it to the BNC connector on the side of the transceiver. The AX1 Bipod gives the antenna acceptable stability during operation.
The IC-705 also has a side-mounted BNC connector, but it’s much higher than that of the KX3 or KX2. I’m not entirely sure I could manipulate the Bipod legs to support the antenna without modification.
That and the AX1 needs an ATU to match 40 meters (where I planned to spend most of the activation). Since the IC-705 doesn’t have an internal ATU, mounting it to the side of the transceiver really wasn’t an option.
I employed my AX1 tripod mount for the first time. On the way out the door, I grabbed an old (heavy) tripod my father-in-law gave me some time ago and knew it would easily accommodate the super lightweight AX1.
On The Air
I first tried using the Mat-Tuner mAT-705 Plus ATU to tune the AX1 on 40 meters.
No go.
I tried both the phone and CW portions of the 40 meter band, but the mAT-705 Plus simply couldn’t find a match. SWR was north of 7:1 – 9:1.
Instead of grabbing the Chameleon MPAS Lite or 2.0 from the car, I decided instead to see if the Elecraft T1 ATU could tune 40 meters.
It did.
In short, I logged my ten contacts to have a valid activation, but it was slow-going. All but two of my contacts were on 40 meters CW. The last two logged were on 20 meters CW.
It was a challenge, but I really enjoyed it! And, frankly, considering the propagation, 5 watts of power only using the IC-705 battery pack, and the inherent inefficiencies using a loaded compact vertical antenna and ATU? I was impressed.
Here’s a QSOmap of my 10 contacts:
I bet my effective radiated power was closer to 2-3 watts.
Typically, the AX1 antenna acts almost like an NVIS antenna on 40 meters, but Saturday it favored Mid-Atlantic and the states of IN, OH, and PA. Normally, I would expect more of a showing from the states surrounding North Carolina.
My last two contacts on 20 meters were with KE5XV in Texas and KB0VXN in Minnesota. Not a bad hop!
It took longer to collect my ten contacts than I had hoped and I ran nearly 25 minutes late to my curbside appointment. I’m a punctual guy, but there was no way I was leaving without my ten! 🙂
Here’s a video of the entire activation. Hint: it’s the perfect remedy for insomnia:
Next time I try to pair the IC-705 with the AX1 antenna, I think I’ll try adding a couple more ground radials and see if the mAT-705 Plus can more easily find a match.
One thing I know for sure: the T1 is a brilliant little ATU. While the mAT-705 Plus was never designed to do this sort of match, it’s comforting to know the T1 can.
I’m very curious if anyone else has paired the Elecraft AX1 with the Icom IC-705 or other QRP transceivers. If so, what was your experience? Please comment!
Typically, there’s a trade off with field antennas:
High-performance antennastend to take more time to install. Some of my highest performance antennas are dipoles, doublets, delta loops, and end fed wire antennas. All of them require support from a tree if I want maximum height off the ground. Some (like the dipole) require multiple supports. While I actually enjoy installing wire antennas in trees, it typically takes me at least 10 minutes to install a wire antenna if it only needs one support and one counterpoise.
Compromised or low-profile antennas may lack performance and efficiency, but are often much quicker and easier to deploy.
In my opinion, field operators should keep both types of antennas in their arsenal because sometimes the site itself will dictate which antenna they use. I’ve activated many sites where wire antennas simply aren’t an option.
That was not the case last Tuesday, however.
Tuttle Educational State Forest (K-4861)
On Tuesday, December 29, 2020, I stopped by Tuttle Educational State Forest (K-4861)–one of my favorite local state parks–for a quick, impromptu activation.
I had no less than four antennas in my car that day and Tuttle is the type of site where I can install pretty much anything: they’ve a spacious picnic area with large tables, tall trees, and parking is close by. Tuttle is the perfect place to deploy not only a large wire antenna, but a large radio if you wish since you don’t have to lug it far from the car.
But en route to Tuttle I decided to take a completely different approach. One of the four antennas I had in the car that day was the Elecraft AX1 antenna.
Without a doubt, the AX1 is the most portable antenna I own. It’s so compact, I can carry it in my pocket if I wish.
When I first purchased the AX1, I was very skeptical and assumed it would only work when “the stars aligned”–days with better-than-average propagation and lots of POTA hunters/chasers looking for me.
The first time I used the AX1 in the field, it impressed me (understatement alert).
In all of my AX1 activations, however, I had only operated on the 40 meter band where the antenna’s footprint looked more like a NVIS antenna than a vertical. Meaning, most of my contacts were in neighboring states like Tennessee, South Carolina, Virginia, and Georgia (typically, those states are in my 40 meter skip zone).
The reason I hadn’t tried 20 or 17 meters with the AX1 is because I would start an activation on the 40 meter band and accumulate enough contacts to achieve a valid activation. Since I’m often pressed for time, I simply didn’t bother configuring the antenna for the higher bands.
Time for that to change!
The question I wanted answered at Tuttle: could the AX1 antenna work “DX” stations? By DX, I mean POTA DX, so distant states and provinces primarily–not necessarily other countries.
I paired the Elecraft KX3 with the AX1 at Tuttle. This was the first time I’d ever tried this particular transceiver/antenna combo.
After setting up, I started on the 20 meter band and called CQ for a few minutes.
The first two stations I worked were in Texas (KF9RX and K5RX).
The third station (W6LEN) was in California.
California!?!
Honestly, it was/is hard for me to fathom how in the world 10 watts into a tabletop telescoping whip antenna could work a station exactly 2,083 miles (3,352 km)–and three time zones away–from my picnic table. I’m sure W6LEN has a great antenna on the other end, but I bet he would be surprised to learn that my 10 watt signal was being radiated by such a wee antenna.
I then worked stations in Florida (K2WO), Minnesota (N0UR), and New Hampshire (W2NR) and decided to move to 17 meters.
On 17 meters I worked W2NR in New Hampshire once again.
I should note here that each time you work a station on a different band or with a different mode, it counts as a separate contact in POTA. In other words, my contacts with W2NR on 20 meters and 17 meters counts as two logged contacts toward my overall QSO count. I’m very appreciative of hunters who go out of their way to work me on different bands and modes: those extra contacts help me achieve a valid activation in short order.
I then moved to 40 meters and worked stations from Tennessee, West Virginia, Ohio, and Michigan.
Video
Here’s a video of the entire activation. It’s a long video as it starts at set-up and continues until my last contact. There are no edits in this video–it’s a real-time, real-life deal and contains all of my bloopers:
Note that in the video I had the KX3’s volume maxed out so that it could be picked up by my iPhone microphone. The KX3’s wee internal speaker was vibrating the chassis ever so slightly. On the 40 meter band, it resonated enough that it moved the encoder slightly. Next time, I’ll plan to bring a portable external speaker (if you have any suggestions of good ones, let me know).
I should also add that I’m very pleased with my new Bioenno 3aH LiFePo 12V battery. You can see it in the photo above–it’s slim, lightweight, and very compact.
I purchased it during Bioenno’s Black Friday sale. I was a little concerned it might not have enough capacity to carry me through multiple activations–my other LiFePo batteries re 4.5 and 15 aH–but that does not seem to be the case at all! Not only did it provide nearly an hour of intense use on this activation, but it also powered three activations the previous day–all four activations on one charge! Brilliant!
Radio magic
As I mentioned in a previous post, this was one of those activations that reminded me of the magic of low-power radio. It was incredibly fun!
For all of those phone/SSB operators out there, I will eventually see how successful I can be doing a phone-only activation with the AX1 antenna. I’ll plan to make a video of it as well. I’ll need to plan this for a day when I have more time to spend on the air and at a site where I know I’ll have internet access to spot myself to the POTA network. SSB isn’t quite as effective as CW when operating with a setup this modest. Still–it can be done! It just requires a little more patience. Please let me know if this sort of thing would interest you.
QRP radios, product announcements, reviews, news and more. Low power amateur radio fun!
Please support QRPer by adding us to your whitelist in your ad blocker. Ads are what helps us stay online. All of our ads are ham radio related--no junk, we promise! Thank you!
Sometimes field activations can be relaxed and laid-back. Other times they can be absolute mayhem!
I knew I would likely be the only visitor at Tuttle that day; it was pretty cold and very wet.
