As many of you know, I’m a bit of a backpack geek (okay, that’s an understatement).
If you don’t believe me, listen to the Ham Radio Workbench episode where they invited me to take a deep dive into my world of packs, bags, and organization. It’s not for the faint of heart or the short of time. (It was seriously fun, though!)
You would think being a pack geek that I would produce more videos showing a breakdown of what’s in my packs and how I organize them. The irony is I watch numerous videos on YouTube of how others pack out their various field and travel kits.
I’ve had several requests to do a video about my main SOTA pack which is designed around the Spec-Ops Brand T.H.E. Pack EDC tactical backpack (see above). I think the reason why I haven’t made a video and post yet about this pack is because I knew it would be quite detailed and, frankly, take a lot of time to detail.
That said, here we go!
Designed to be modular
This particular pack is not set up to be a fully self-contained field backpack for just one radio. Quite the opposite: I use its main compartment to hold a wide variety of modular field kits I’ve put together.
What do I mean by “modular”–?
As I prepare my pack to hit the field, I decide which radio I plan to take; typically that radio is in a pouch, bag, or case of its own that contains radio-specific connectors and accessories.
Mini Mini Arborist Throw Line Kit in a Tom Bihn Small Travel Tray
Many thanks to Rich (KQ9L) for sharing the following field report:
Field Report and Lessons from Torrey Pines State Beach (K-3580)
by Rich (KQ9L)
As you can tell from my call sign, I am a W9er, but recently had the opportunity to travel to California and specifically to the San Diego area. I thought it would be fun to try to activate a park near my hotel. I consulted the POTA website and found one park which was within 5 miles of my hotel, perfect!
While planning for the trip, I carefully chose and packed my gear to minimize added weight and bulk of my carry-on luggage. Because on this requirement, I chose my Elecraft KX2 with built in battery, my KXPD3 paddles, a K6ARK end-fed half-wave and the telescoping fishing pole from the PackTenna portable mast system.
Everything fit perfectly into a Lowepro CS40 case and Tom Bihn HLT. I did not bring the tripod from the PackTenna system to cut down on weight and bulk.
The hardest part of traveling with this setup was the fishing pole as I could not fit it diagonally in my carry-on legal luggage and I ended up having it sticking out the top of my soft side Patagonia MLC carryon backpack / travel luggage.
I received a few odd looks from passengers and airline personal but to my relief I did not get hassled for the odd looking thing sticking out of my luggage. To minimize the space my luggage occupied in the overhead storage, I simply pulled the pole out of the luggage and stowed it in the bottom of the overhead bin. Easy! Everything made it safely to my destination and no the got destroyed.
This morning [October 15, 2022] I decided to go out early to activate Torrey Pines K-3580 which is just north of San Diego.
I ran into a problem which I guess I should’ve anticipated. Being from the central time zone and normally a 5 AM riser, I found myself ready to go by 3 AM Pacific time. I dillydallied for a few hours and watched a few of your YouTube videos to get me psyched up and ready for the activation.
On Monday, September 12, 2022, I had one primary objective in mind: to test the Eton Elite Satellite portable shortwave radio.
Many of you know that besides being a QRPer, I’m also an SWL or shortwave listener. Over on my other blog, the SWLing Post, we post news, information, guest posts, and reviews covering the diverse world of shortwave radio and international broadcasting.
Occasionally, I evaluate new receivers and the Eton Elite Satellit is the latest shortwave portable from the Eton Corporation. It was meant to be their flagship, benchmark portable but unfortunately early production units were plagued with a bit of internally-generated noise. On September 12, I was trying to sort out just how much this internal QRM affected the radio’s performance.
South Mountains State Park (K-2753)
I wanted to go to a known RF-quiet area to check the Elite Satellit and the South Mountains State Park Clear Creek Access was an easy detour during my errands that day.
The Elite Satellit
First thing I did after arriving on site was to put the Elite Satellit through some basic paces (AM/SSB, Mediumwave, Shortwave, FM, AIR, etc.). I also compared it with the Tecsun PL-990 portable.
I made a long list of notes and observations to send to Eton that afternoon.
After I finished the tests, I checked my watch and–woo hoo!–I had just enough time to squeeze in a short activation. I only had a 45 minute window, so this activation needed to be a very quick one.
I had two radio kits with me: The Mountain Topper MTR-3B kit, and the Elecraft KX1 kit. I chose the Elecraft KX1 because I had such a blast using it the previous day at Lake James.
I had a number of antennas in my pack, but chose the excellent PackTenna Mini End-Fed Half Wave that I cut for 20 meters. This is one of my go-to SOTA antennas since it’s compact, rugged, efficient, and easy to deploy even if your only option is a short tree or telescoping mast as is often the case on a summit.
I felt like 20 meters would be a worthy band for the time of day and recent propagation trends as well. Hopefully, it would be productive enough to provide the 10 needed contacts to validate the activation. If I needed, I could use it on 30 meters with either its internal ATU or (more likely) the Elecraft T1 that was also along for the ride.
After returning from Canada this summer, I had a number of projects on the table including three radios to evaluate and a number of DIY projects on our investment house. The home projects took priority, so for the month of August, I did very little in terms of POTA activating.
In September, there was one radio in particular I was very eager to take to the field (besides the Penntek TR-45L). That was my Elecraft KX1, “Ruby.”
Before leaving for Canada, Ruby went into surgery once again under the care of my good friend “Dr.” Vlado (N3CZ).
I couldn’t figure out why she kept dropping power output to nil after being on the air for 20-25 minutes. I knew Vlado would sort out the issue.
Vlado discovered the source was a cold solder joint that was failing when the radio would become warm from operating. He fixed this and checked a number of other spots on the board.
He then tested the KX1 on a dummy load for and hour and she performed flawlessly after the surgery.
He fixed Ruby in early June and then we went to Canada for two months. I never put Ruby on the air in Canada.
After our return to the States, I was eager to take Ruby out to the field again and that’s exactly what I did on Sunday, September 11, 2022.
Lake James State Park (K-2739)
Lake James State Park–along with South Mountains State Park–are the easiest parks for me to hit during my nearly weekly travels on Interstate 40. I feel so fortunate that both are superb POTA sites with loads of spots to operate.
I arrived in the late afternoon and to my surprise there was hardly anyone at the park (I think it was a little too close to evening mealtime for families).
I set up my station at a table close to the parking area just to keep things simple. I was looking forward to enjoying at least 30 minutes on the air and seeing just how well Ruby might hold up.
I decided to use the Tufteln End-Fed Random Wire antenna knowing it would be a quick to deploy and frequency agile.
I tried to use the KX1 ATU to tune the random wire, but I wasn’t pleased with the SWR. Frankly, it was doable (1.9:1 on 20 meters), but I wanted something much closer to 1:1 since I was already only pushing 2.5-3 watts output.
Keep in mind, the KX1’s internal ATU is not in the same league as the ones in the Elecraft KX2, KX3, or T1–the KX1 ATU has a much smaller matching range.
Also, I suspect Ruby’s ATU wasn’t built for optimal performance by the original builder. I do plan to re-work her ATU as best I can at some point in the future.
I pulled out the Elecraft T1, put the KX1 ATU in bypass mode, and hooked it up to the antenna. The T1 had no problem at all finding 1:1 matches across 40, 30, and 20 meters, of course.
Turns out, if you go to Canada for nearly two months, when you return home you’re going to have about two months worth of catch up.
It’s all explained in one of Einstein’s theories. If memory serves, Einstein stated:
“One cannot simply ignore stuff for two months and expect no repercussions. Time lost must be accounted for due to the principles of the conservation of energy. Plus…what in creation were you thinking?”
When we returned from Canada in early August I had some pretty big plans about the parks and (especially) summits I would hit here in North Carolina. But after returning, I quickly realized I had so much work to do around the house and a number of DIY jobs I’d postponed at our investment property. They all immediately took priority.
Indeed, in the one month span after returning from Canada, I only performed three park and no summit activations. There was a three week period of time without activations of any sort. I simply didn’t have the time to fit anymore in my schedule. This all gave me a serious case of activation withdrawal.
If you’ve been following my field reports, you’ve no doubt noticed that I never do multi-hour activations at one site unless I happen to be camping at a POTA park.
I’m asked about this fairly regularly (why I don’t do longer activations to achieve Kilo awards, etc.) but the truth is I make POTA/SOTA fit in my busy family schedule. This often equates to short (30-60 minute) activation windows.
Then quite often, I’m on the road or doing errands in town and realize I have a short opening for an activation, so I squeeze it into the day. This is why I always have a fully self-contained field radio kit in my car. At a moment’s notice, I can set up a station, and play radio.
In a way, I find this style of quick activation fun, too. “Can I seriously validate a park during this short window of time–?”
These activations remind me of that scene in A Christmas Story where the father gets a small thrill out of timing himself as he changes a flat tire on the side of the road. I totally get that.
Except with me it’s deploying antennas instead of managing lug nuts.
Hamfest time!
Friday, September 2, 2022 was a big day for me. On the way back from visiting my folks that morning, I spent a couple of hours at the Shelby Hamfest.
The Shelby Hamfest typically has the largest outdoor tailgate market in all of North Carolina and likely one of the larger ones in the southeast US. I had no items on my wish list, I just wanted to see what was there.
This was the first hamfest I’d attended in a little over a year. It was a lot of fun and I got to meet a number of friends and readers/subscribers.
Driving home after the Shelby Hamfest that early afternoon, I realized I was passing dangerously close to the Clear Creek access of South Mountains State Park.
I had a couple of errands to run back home before the post office closed at 17:00 that day, but in my head I believe I had just enough time for a quick activation. The total amount of detour driving would only be about 15 minutes; I’d just need to keep the activation (including most set up and pack up) under 45 minutes or so.
At the last minute, I took a right turn and headed to the park!
Fortunately, the one lonely picnic table at the Clear Creek access was unoccupied.
I grabbed my IC-705 kit and a new antenna!
The MM0OPX QRP End-Fed Half-Wave (EFHW)
A few weeks prior, Colin (MM0OPX) reached out to me and asked if I would consider testing a new high-quality, highly-efficient QRP EFHW he’d designed.
Of course, there’s nothing new about an EFHW–it’s one of the most popular field antenna designs on the planet–but Colin’s goal was to make one with the lowest insertion loss possible in a compact, lightweight (50g), and durable format.
I say he succeeded.
In fact, this activation was actually the second one where I used Colin’s QRP EFHW. The previous day, I paired it with a then very Beta version of the Penntek TR-45L at Tuttle Educational State Forest (K-4861).
In short, the antenna made for a wildly successful QRP activation. Here’s the QSO Map (you’ll need to click and enlarge to see the number of contacts):
QSO Map from the previous day with the MM0OPX QRP EFHW
The Penntek TR-45L was still quite new at the time and even though I got John’s (WA3RNC) blessing, I didn’t post the activation video and mini overview on YouTube. Keep in mind the TR-45L was still in Beta so not all features had been finalized.
As I mentioned in a previous post, I’ve now invested in a Pro account with Vimeo that allows me to post completely ad-free videos that my Patreon supporters can enjoy and even download. I recently discovered that YouTube unfortunately inserts ads even though I have monetization turned off. I pay for Vimeo’s bandwidth and server space, so I also can control the ad experience completely (basically eliminating any possibility of ads!).
My Patreon supporters are the ones making it possible for me to pay the annual $420 fee to Vimeo and I am incredibly grateful, so I pass along the benefit to them.
This year, I’ve had a couple of readers very kindly offer to loan me their FX-4C transceivers to take to the field and review.
Those offers have been very temping because I’ve only heard positive comments from owners of this wee feature-packed SDR transceiver designed by Yu (BG2FX).
Earlier this year, I learned that Yu was retiring the FX-4C and would be introducing two new radios, so I decided to hold off on an FX-4C review for this reason.
My buddy, Don, informed me that the new radios were now available for pre-order, so I checked out the option on Yu’s website, and placed an order.
Details (features and specs) are still a little sparse because BG2FX is still finalizing the design and lining up production, but here’s a snapshot of the two models based on Yu’s preliminary info:
The FX-4CR can push 15-20 watts on most bands according to John, which is most impressive for a one pound radio that fits in the palm of your hand! It covers 80 – 6 meters, sports a color screen with a 48 kHz wide waterfall display, an internal sound card for digital modes, built-in speaker and microphone, 9 – 18 VDC input range, and even sports Bluetooth!
That’s an impressive array of features for $550 US (on pre-order).
The FX-4L
I pre-ordered the FX-4L and am told by Yu that it should ship by end of October or early November 2022. I wouldn’t be surprised if that’s an optimistic projection.
The FX-4L is essentially a more basic QRP version of the FX-4CR; it’s maximum output power is around 5 watts.
It’s very similar to the FX-4CR in many respects: it has the same display from what I can tell, covers 80 – 6 meters, has a wide voltage range 9 – 18 VDC, sports an internal sound card, and is super compact and lightweight.
The FX-4L doesn’t appear to have Bluetooth. Lu doesn’t mention a built-in speaker or microphone, but there’s an obvious speaker grill and even a small hole that might be a microphone. I’ll try to confirm this. Yu does note that there’s room in the chassis for the user to add a battery or ATU.
I’ve been more interested in the FX-4L because, as you likely know, it’s very rare for me top operate over 5 watts of power.
That said, I certainly see the appeal of a 15W+ radio like the FX-4CR.
(Many thanks to Yu for sharing all of the FX-4L photos above.)
Stay tuned!
I’m really looking forward to checking out the FX-4L and also reading AE5X’s assessment of the FX-4CR.
I’m curious if anyone else has pre-ordered one of these radios. Also, if you’re an FX-4C owner, I’d love to hear your comments!
Many thanks to QRPer.com reader, Charles, who recently sent me the following question:
Thomas, I’ve watched a number of your videos and read your activation reports. I’m studying for both my Technician and General class license right now and hope to pass both in one session later this month. I’m also learning CW.
I consider myself an audiophile and appreciate good audio fidelity. I know that amateur radio modes are narrow and by their very nature have less audio fidelity than commercial broadcast modes.
I’ve already obtained a Kenwood TS-590G for the shack. It was practically given to me by a friend. I’m very pleased with its audio fidelity especially when I connect it to an external speaker.
Next year, I plan to buy a dedicated QRP field radio. Out of the radios you’ve owned, what are your favorites in terms of audio fidelity. Also, what are your least favorites?
Thank you.
What a great question, Charles!
Being an audiophile, I’m sure you understand that this is a very subjective area: one person’s idea of good audio might not match that of someone else’s.
I can only speak to how I evaluate a transceiver’s audio.
What makes for good audio?
A lot goes into what I would call “good audio” in an amateur radio transceiver.
To me, “good audio” means the radio
produces clear accurate sound,
has stable AGC (Auto Gain Control),
has audio properties that benefit amateur radio modes like CW and SSB,
has enough audio amplification to be heard in noisy field conditions,
and has little to no internally-generated noises leaking into the audio amplification chain. (In other words, a low noise floor.)
In contrast, radios with poor audio
sound noisy/harsh,
have a high noise floor or produce audio hash making it difficult to hear weak signals,
have speakers that become distorted at higher volume levels,
have poor AGC characteristics which lead to pumping,
and are simply fatiguing to listen to during extended on-air sessions (like long activations or contests).
I would add that a good receiver front end is an important part of audio because it keeps imaging and overloading at bay, thus producing a less cluttered and noisy audio experience.
My field audio favorites
I’ll keep this discussion limited to QRP field portable radios. There are numerous 100 watt desktop radios with excellent audio because those models aren’t trying to limit their current consumption like field radios typically do. They can use more amperage to benefit audio amplification and push a much larger speaker.
In addition, I’ll limit the scope to field radios with built-in speakers. There are some great CW-only radios out there that lack an internal speaker but have great audio (thinking of the Penntek TR-35 and the Elecraft KX1, for example); choice of earphones or headphones can have a dramatic effect on audio. That’s a different discussion altogether!
Best audio: My top three picks
The following are three of my favorite portable field radios in terms of audio quality. I limited myself to three simply because all of the radios I use regularly in the field have what I would consider good and acceptable audio.
The following are simply stand-outs, in my opinion:
The entire time I was in Canada this summer–about two months–I used two field transceivers: the Elecraft KX2 and the Discovery TX-500.
I did sneak in two extra radios under the floor of my trunk/boot space, but they both were limited to three watts and conditions were so rough during many of my activations, I wanted the option of a QRP “Full Gallon” (5 watts). Thus, I stuck with the TX-500 and KX2 (which are both actually capable of 10 watts output).
When I got back to the States, I was eager to do a POTA activations with my other radios–many of you know I like to rotate them–but there was one, in particular, I was eager to put back on the air…
The Mountain Topper MTR-4B.
This MTR-4B V2 is on loan to me from a very generous reader/subscriber. In fact, get this: he ordered the MTR-4B early this year and had it drop-shipped to me directly from LnR Precision. He knew I’d be in Canada for the summer, so has been incredibly flexible with the loan period (basically leaving it open ended).
My review of the MTR-4B will be published in the November or December (2022) issue of The Spectrum Monitor magazine. Then I’ll be sending the MTR-4B to its rightful owner!
In the meantime, I built an ultra- compact field radio kit around the MTR-4B and in my Tom Bihn HLT2 EDC pouch.
This kit is nearly identical to the one I made for my MTR-3B (just a different color, really).
It contains the radio, a battery, an antenna (although I used a different one during this activation), fused power cord, paddles, earphones, RF choke, RG-316, logbook, pencil, and even a full throw line and weight. I’ve listed all of the components with links below.
It’s hard to believe it all fits in such a compact kit and it works so well. It’s nice to know that with the kit it in my backpack, I’ve got everything I need to play SOTA or POTA at the drop of a hat.
South Mountains State Park (K-2753)
On August 8, 2022, I drove to my hometown to check in on my parents. I didn’t have a lot of time, but I wanted to fit in a quick activation with the MTR-4B along the way.
One of the easiest parks for me to hit en route is the South Mountains State Park Clear Creek Access–it’s maybe a 10-15 minute detour off of Interstate 40.
The weather was amazing that day, although I’ll admit I had to get used to the heat and humidity after spending so much time in Canada this summer!
This access point of South Mountains only has one picnic table. I’m always prepared with a folding chair if that table is occupied, but so far it’s always been available. I’m sure the reason is because this particular South Mountains access point is way less popular than the main entrances. Most of the visitors here come to fish at the reservoir.
Setting up
The great thing about having your whole station in a pouch is that setup is quick and easy.
Yesterday, John (WA3RNC) opened orders for his long-awaited Penntek TR-45L 5 band, CW-only, QRP transceiver.
As I mentioned yesterday, I’ve had the pleasure of helping John beta test this radio for the past month. In that time, I’ve gotten to know the radio from the inside out and have even taken it on a few POTA activations. In fact, with John’s permission, I just posted my first TR-45L activation video for Patreon supporters yesterday. The radio was using an early firmware version in that video.
TR-45L Video Tour and Overview
Yesterday, after an early morning appointment, my schedule opened up; a rarity in my world.
I then got the idea to take the TR-45L out to a park, do a full video overview of its features, then put it on the air in a POTA activation.
Hazel loved this idea too.
So I packed the TR-45L, a log book, my throw line, and two 28′ lengths of wire. Hazel jumped in the car before I could invite her.
I’ve used a wide variety of antennas on the TR-45L over the past weeks, but I hadn’t yet performed a park activation only using two lengths of wire and relying on the TR-45L’s optional Z-Match manual antenna tuner. This would make for a great real-life test!
I pushed this video to the front of the line since the TR-45L just hit the market. I wanted to give potential buyers an opportunity to see and hear this radio in real world conditions thinking it might help them with their purchase decision.
I’m currently about 7 weeks behind publishing my activation videos. Much of this has to do with my travel schedule, free time to write up the reports, and availability of bandwidth to do the video uploads (I’ve mentioned that the Internet service at the QTH is almost dial-up speed).
I was able to publish this video within one day using a new (limited bandwidth) 4G mobile hotspot. Patreon supporters have made it possible for me to subscribe to this hotspot service and I am most grateful. Thank you!
So that I can publish this report quickly (this AM), I’m not going to produce a long-format article like I typically do. Instead, this is one of those rare times when the video will have much more information about the radio and the activation than my report. I’ve linked to and embedded the video below.
We started off our trip in Ottawa where we spent four days.
Only moments after arriving at our hotel that first day, Vince (VE6LK) made time in his schedule to administer my Canadian Basic exam remotely. That evening–despite being a bit bleary eyed after a fairly long day of driving–I passed my Basic with Honours. (I’m still chuffed about that!)
By the next morning, I already had the callsign I requested: VY2SW. My mailing address in Canada is in Prince Edward Island hence the VY2 call. Since essentially every new call in Canada is a vanity call, I chose the suffix SW to reflect my US call. PEI is one of the few provinces where as a Basic license holder you can request a 2×2 call.
My first activation in Canada was at Hog’s Back Conservation Reserve. I had the good fortune of meeting up with Andrew, one of my subscribers, at the park. It was great getting to know him–what a nice fellow–and to start off a series of activations in Canada on the right foot.
St-Anne River in Saint-Ferréol-les-Neiges
After leaving Ottawa, we made our way to Saint-Ferréol-les-Neiges, Québec where we’d reserved a condo/townhome for 6 weeks. That served as our home base as we traveled around Québec City, Saguenay, the Charlevoix region, and the North Shore of the St-Lawrence.
At our local farmer’s market in Saint-Ferréol-les-Neiges, I especially loved the VW campervan bookstore.
I noted in many field reports how surprised I was to discover that a number of popular parks were still ATNOs (All-Time New Ones) in the POTA network. Then again, POTA hasn’t been in Canada as long as other similar programs like WWFF and SOTA.
Many of the POTA activations I made in Canada were in urban parks–especially the ones in/around Québec City. These activations took me outside of my comfort zone; I’m used to activating state and national parks back home that are expansive and largely in rural areas.
QRP radios, product announcements, reviews, news and more. Low power amateur radio fun!
Please support QRPer by adding us to your whitelist in your ad blocker. Ads are what helps us stay online. All of our ads are ham radio related--no junk, we promise! Thank you!
As many of you know, I’m a bit of a backpack geek (okay, that’s an understatement).
This particular pack is not set up to be a fully self-contained field backpack for just one radio. Quite the opposite: I use its main compartment to hold a wide variety of modular field kits I’ve put together.
