Category Archives: QRP

Field Radio Kits, Guest Posts, News, Portable, QRP, QRP Radios

Field Radio Kit Gallery: W4JL’s Venus SW-3B and “Sporty Forty” Vertical

2 Comments

Many thanks to Dave (W4JL) who shares the following article about his portable field radio kit which will be featured on our Field Kit Gallery page. If you would like to share your field kit with the QRPer community, read this post.  Continue reading Field Radio Kit Gallery: W4JL’s Venus SW-3B and “Sporty Forty” Vertical →

Accessories, Antennas, Field Reports, Morse Code, News, Portable, POTA, QRP, Videos

Testing the Tufteln AX1 Support: Late-Shift POTA with Vlado in Pisgah National Forest

3 Comments

On Tuesday, February 13, 2024, one of my daughters had a dress rehearsal for A Midsummer Night’s Dream. The venue where the cast meets is a good 45 minutes from my QTH, and if I didn’t have POTA fever, I’d have to find something to do to burn four hours of time.

Since I do have POTA fever, I see these windows of waiting around as an opportunity!

An opportunity to spread the POTA fever, even.

On that particular Tuesday night, my dear friend Vlado (N3CZ) didn’t have any plans, so I invited him to join me on a short, late-shift activation. The idea was that he’d perform an activation, then we’d go grab dinner at a restaurant in Mills River.

Pisgah National Forest (K-4510) and Game Land (K-6937)

Quick note about park numbers: As of the time of publishing this article, we’re still using the “K” prefix for US parks. Tomorrow (March 20, 2024), all US park prefixes will change to “US.” Pisgah National Forest, for example, will be US-4510 starting tomorrow. Today, it’s still (barely!) K-4510, so that’s what we’ll use.

We drove to the Sycamore Flats Picnic Area where I performed a number of late-shift activations in February. What I love about the site is that it’s rarely busy (especially at dusk and into the evening), there are numerous spots to set up, and it’s pretty convenient to the Shakespeare venue.

Tufteln AX1 Antenna Stand

I’d mentioned to Vlado in advance that I was going to test “a new antenna support system.” I think he might have assumed I was packing a large tripod with a 1/4 vertical or something similar, so it was fun to pull out the AX1 and  Tufteln AX1 Antenna Stand!

Vlado, like me, loves compact radio gear, and I knew he’d never used the Elecraft AX1 before, so I was looking forward to showing him just how capable of an antenna it is for POTA, even on 40 meters.

That day, it had been pretty gusty, and in the evening hours, while a little calmer, it was still a tad windy. I thought it would be the perfect opportunity to pair the AX1 with Joshua’s AX1 stand because it’s much more stable than the AX1 bipod in windy conditions.

Source: Tufteln.com

The stand consists of two parts: a base and an antenna sleeve. The sleeve screws into the base, and the AX1 simply slides into the sleeve. The height is perfect for the KX2’s BNC (indeed, it works with a number of radios). The stand will also accommodate the AXE 40M coil.

Source: Tufteln.com

When attached to the KX2, it makes for a very stable base. You can even use it as a stand-alone antenna support for the AX1.

Joshua has had this stand in his Tufteln product line for over a year, but I don’t think I’ve actually used it during an activation that I’ve also filmed.

New Mics!

Speaking of filming, this activation with Vlado gave me an opportunity to test my new DJI wireless mics. The system comes with two mics so both Vlado and I used them.

I filmed the activation, but in truth, was doing this more or less to test the mic audio. I believe I mentioned early on that this video might not ever be published.

In the end, I decided to publish it–the audio was quite good, and the wireless mics cut down on the wind noise dramatically.

Gear:

Note: All Amazon, CW Morse, ABR, Chelegance, eBay, and Radioddity links are affiliate links that support QRPer.com at no cost to you.

N3CZ: On The Air

My goal was to get Vlado on the air and give him a taste of POTA using the AX1 and 40M coil. I hadn’t planned to activate–since we were grabbing dinner afterward–but I did end up activating after the UTC day changed.

Without realizing it, I actually put a lot of pressure on Vlado.

He started his activation at 18:42 local (23:42 UTC). That meant, in order to log a valid POTA activation on February 13, he needed to log at least ten contacts in 18 minutes (using the AX1!).

Keep in mind that Vlado is a contester and DXer (also, very much a QRPer!). He’s used to operating CW at insane speeds when needed. In fact, he’s always one of the top people (if not the top) in the CW speed test at the W4DXCC contesting and DX conference.

I suggested he operate around 20 words per minute.

He started calling CQ POTA, and the first few contacts came in pretty slowly. I was getting nervous that I might have unintentionally made Vlado’s first POTA activation one that wouldn’t be valid.

Then the pace started picking up. (Whew!)

He ended up logging a total of 10 contacts in 12 minutes! Woo hoo!

Here’s his QSO Map, showing what the AX1 pushing 5 watts for twelve minutes can do:

Next, we decided that I would, indeed, perform a quick activation.

I spotted myself on the POTA site and started to call CQ, then it hit me: it was 23:58 UTC. If I worked one contact in that two minutes, it would be considered an activation on February 13 of only one contact.

Instead, we waited for a little over a minute for the UTC day to change!

I ended up working a total of 24 contacts in 21 minutes. Woo hoo!

Here’s my QSO Map:

And here are our logs:

Activation Video

Here’s my real-time, real-life video of the entire activation.  As with all of my videos, I don’t edit out any parts of the on-air activation time. In addition, I have monetization turned off on YouTube, although that doesn’t stop them from inserting ads before and after my videos.

Note that Patreon supporters can watch and even download this video 100% ad-free through Vimeo on my Patreon page:

Click here to view on YouTube.

What fun!

I always enjoy hitting the field with Vlado.

Since this quick little activation, he’s been out there hitting POTA sites regularly.

He hasn’t seen the doctor yet, but I’m positive he caught POTA fever. It’s incredibly contagious.

Also, the Tufteln AX1 stand worked perfectly in the wind. I’m going to keep this tucked away in my pack alongside my second AX1 to pair with a wide variety of radios.

Thank you!

Thank you for joining me during this activation!
I hope you enjoyed the field report and my activation video as much as I enjoyed creating them!

Of course, I’d also like to send a special thanks to those of you who have been supporting the site and channel through Patreon, and the Coffee Fund. While not a requirement, as my content will always be free, I really appreciate the support.

As I mentioned before, the Patreon platform connected to Vimeo makes it possible for me to share videos that are not only 100% ad-free but also downloadable for offline viewing. The Vimeo account also serves as a third backup for my video files.
Thanks for spending part of your day with me!
Cheers & 72,
Thomas (K4SWL)

Field Radio Kits, Field Reports, Guest Posts, News, Pedestrian Mobile, Portable, QRP, SOTA

Dale Goes “SOTA-Lite” with the Elecraft KH1

15 Comments

Many thanks to Dale (N3HXZ) who shares the following field report:

SOTA-Lite with the KH1

by Dale (N3HXZ)

My KH1 Edgewood Package finally arrived in late February. As an owner of a KX2, I wondered why the heck I was buying the KH1. I am perfectly satisfied with the KX2 for my SOTA operations. However, the idea of shedding a few pounds in my pack got my attention, and the notion that I could set up and be on the air in a minute or so was also intriguing. I like to do several summits a day and this would be a time saver.

I decided to take Elecraft to task by convincing myself that I could do successful activations with just the Edgewood package.

The only exception to the package was to bring along the AXE1 extender so that I could operate 40 M.

I also wanted to prove to myself that I could carry all my gear with just a waist pack (Hence SOTA Lite!). A picture of my gear is shown below. I have an older AXE1 and it does not fit into the whip post of the KH1. I reverted to using the AX1/AXE1/Whip attached to the bnc jack. I include the 33’ counterpoise for 40M, a right angle jack for the ear buds (to not conflict with the log tray), a small first aid kit, deet, a spare keyer, a power bar, and a waist pack. The total equipment weighs in at 2.9lbs (excluding water!).

My traditional SOTA gear includes the KX2, the Chameleon MPAS-Lite Vertical antenna, a small portable pad to set the gear on, and a folding stool. Along with a backpack, the equipment comes in at 17 lbs. Hence the KH1 gear saves me 14 lbs! I decided to jettison the folding stool and operate in true pedestrian style (standing) with the KH1.

Traditional SOTA gear:

KH1 SOTA gear:

Jim (KJ3D) and I have done several activations together and he also purchased the KH1. Our first outing was a day trip on March 4th from our QTH’s in Pittsburgh to Maryland to activate Marsh Hill (W3/WE-001) and Dan’s Rock (W3/WE-002).

Jim operated on 17M and 20M, I operated on 15M and 40M. My favorite band for morning operations is 15M. If you hit it right, you can work both Europe and the West Coast at the same time. 11 AM was such a time and with the KH1 at 5 watts, I was able to reach east as far as Sweden and west as far as California. Not bad for a compact transceiver, 5 watts, and a compromised whip antenna!

I decided to also check out 40M with the AX1/AXE1 on the bnc post. It tuned up nicely and I worked a couple stations (including an S2S!). The QSO map of the contacts is shown below.

The first activation also gave me some real-time experience using the log tray. I was skeptical going in as to how effective this would be, especially in a pile-up. I also like to record RST signal reports so I can report a complete QSO. The log sheets are not set up for that, but you can jot down the signal reports in a lower line. I was recording about 4-5 QSO’s per sheet. With a pile up going on, I found it easier to just stuff the sheets in my pocket after they were used up rather than trying to insert them in the log tray behind the unused sheets.

Still, I applaud Elecraft for the log tray design; doing the best you can with the real estate space available in an all-inclusive compact transceiver unit.

My operating platform switched from a rectangular pad holding the KX2 gear on my lap while sitting in a stool to operating from my left hand while standing. The picture below captures my operating set-up. As a courtesy, I like to include the chaser’s name in my QSO. I have a sheet of ‘Frequent Chasers” in my hand as a quick reference!

Having completed an initial outing to work out the kinks of operating a new rig, we took a two-day trip to the Blue Ridge mountains on March 14th-15th and activated seven summits along Skyline Drive. I wanted to see if the KH1 and my slimmed down gear would meet the challenge. T

he summit hikes along Skyline Drive are not too rigorous; roughly 0.5 to 1 mile each way with elevation gains from 200 ft. to 600 ft. We operated North Marshall (W4V/SH-009), Hogback Mountain (W4V/SH-007), The Pinnacle (W4V/SH-005), Stony Man (W4V/SH-002), Hawksbill (W4V/SH-001), and Hazeltop (W4V/SH-004). Here is a pic of Jim operating atop North Marshall.

The KH1 performed flawlessly. We operated all the bands (40/30/20/17/15). Activations got easier as we got more familiar with operating the rig. I grew very accustomed to activating standing up; Jim preferred to sit on a rock or log. What surprised the both of us was the positive impact on our physical endurance from shedding 14 lbs of gear. This cannot be underestimated for rigorous summit hikes and for me is a key reason to buy the KH1.

Another key factor was eliminating the time needed to set up and tear down a more traditional SOTA set-up (transceiver, antenna, cables, etc.).

Finally, my fears about operating 5 watts with a compromised whip antenna have vanished. From my experience having 5 operating bands is more important than more power, or a larger antenna. Below is a composite of my two-day activation QSO’s which encompassed the 5 bands available with the KH1.

Finally, the article would not be complete without a view atop Dan’s Rock (W3/WE-002) just off I68 near Cumberland MD.

No, your eyes are not deceiving you. Aside from a beautiful view looking east, you have psychedelic paint covering the rocks! At first you think this is an affront to the natural beauty of the land, but after a while it kind of grows on you. 🙂

Radio Gear:

Accessories, Field Reports, Grab And Go, New Products, News, Portable, POTA, QRP, QRP Radios, Reviews, Stealth, Videos

Pedestrian Mobile POTA Hunting: Pairing the KH1 and N6ARA’s Tiny Paddle Plug

8 Comments

On Sunday, March 3, 2024, I had a couple of errands to run in downtown Asheville and also had to pick up my daughter.

I ended up having about 40 minutes to kill and, since I had my Elecraft KH1 field kit packed in my EDC bag, I thought it might be fun to fit in a little radio time.

Since I was downtown, the only viable POTA site to hit would be the Thomas Wolfe Memorial–you might recall my activation there last year–but technically, the park was closed. It is an urban park in the middle of Asheville, and there are no gates to keep people from walking across the grounds, but still, I’d feel better activating with permission from the staff first. (I’m pretty sure they’ll grant that permission, by the way.)

Instead of activating, I decided to do a little POTA hunting.

I parked at the spot where I planned to meet my daughter and grabbed my KH1 field kit.

Upon opening it up, I remembered that I had put N6ARA’s new KH1 TinyPaddle Plug Adapter in the M40 case!

My good friend, Ara (N6ARA), designed a small 3D-printed adapter that allows his TinyPaddle Plug to fit the KH1 securely. He sent me (free of charge) this new key/adapter to evaluate.

The adapter is a super simple design that works with the TinyPaddle Plug (not the TinyPaddle Jack).

I hadn’t used this new adapter in the field yet–I only very briefly tested it at the QTH a couple of days prior.

I mentioned last year, shortly after the KH1 was introduced, that I expected a number of 3rd party paddles to start appearing on the market. Since the interface with the KH1 is a standard 3.5mm plug, it does open the door to 3D-printed designs and experimentation. Admittedly, it’s a small space to fit in a paddle, but it’s doable.

I believe N6ARA was actually the first non-Elecraft paddle I used on my KH1 because his TinyPaddle Plug will fit it natively. That said, the new KH1 adapter makes it a proper secure fit–the way it should be!

Side Note: The OEM Elecraft KH1 paddles (the KHPD1s) are now in Revision 2, and all KH1 owners (who received the original paddles) will get version 2 paddles eventually via Elecraft for free.

The original KH1 paddles have a green circuit board.

I haven’t received my Rev 2 paddles yet, but I know I will before long. It’s my understanding that the Rev 2 paddles have a much better feel, and keying is more accurate.

Still…it’s brilliant that Elecraft used a standard jack so that we hams can design our own paddles if we like.

The TinyPaddle Plug

Ara’s TinyPaddle design is super simple, and while he originally designed the TinyPaddle to be a back-up option, I know a number of hams who use the TinyPaddle as their main field key.

If you’d like to hear more about the TinyPaddle and Ara (N6ARA), I’d encourage you to listen to this recent episode of the Ham Radio Workbench podcast when he was our guest. He’s such a brilliant fellow.

Park Lot Pedestrian Mobile

Again, I can’t stress how cool it is to have a radio that allows you the flexibility to hit the air pretty much anywhere, anytime.

The KH1 is so quick to deploy, low-impact, and low-profile.

It’s as conspicuous as holding a transistor radio with a telescoping whip. So far (it’s still early days, let’s be honest here) no one has seen me with the KH1 and asked me if I’m a spy. I can’t count the number of times I’ve been asked this over the years of POTA activating!

POTA Hunting vs. Activating

Even though both activities–hunting and activating–are a part of the same program, they are very different animals. Continue reading Pedestrian Mobile POTA Hunting: Pairing the KH1 and N6ARA’s Tiny Paddle Plug →

Field Reports, Guest Posts, News, POTA, QRP

Bird Dogging POTA in Augusta, Georgia

7 Comments

As I had no appointments scheduled for Monday, February 26 during the day, I planned a POTA outing in the Augusta, Georgia area which is a two-hour drive from my home QTH. The destination: Spirit Creek Educational State Forest (K-4654).

Source: Google Maps

Apple Maps routed me west on I-16 and then northwest through Statesboro, home of Georgia Southern University (the Eagle Nation). On the drive, I passed acres and acres of farmland, some of it for cotton. I noticed a few of the fields had a reddish tinge and were full of a plant I had not seen before. I did some detective work once back home and  think the plant is red sorrel, a member of the buckwheat family that is native to Europe. I am guessing the red sorrel is a cover for the field between crops.

Source: https://1000logos.net/georgia-southern-eagles-logo/

Red sorrel?

Apple Maps also routed me through Waynesboro which is the “Bird Dog Capital of the World.” The city hosts the largest field trials in the world. Field trials are a competition to evaluate a dog’s ability to find and point coveys of quail. Waynesboro is bird dog crazy; even the town’s water tower is decorated with a bird dog. Wow – the interesting stuff I learn about my home state!

Source: http://thetruecitizen.demo.our-hometown.com/wp-content/uploads/images/2006-08-23/008p1_xlg.jpg

However, we aren’t here to discuss bird dogs but POTA. After sitting longer than I usually drive to a POTA destination, I arrived at my destination. The 570-acre property is surrounded by private land with the entrance tucked between two residences. The road through the forest appears decently maintained and is easier on which to drive than my previous forays into such properties.

Not far into the forest was an open area for parking and a kiosk with hunting information. Upon checking the kiosk, I read the only thing in season right now is small game and knew I’d be unlikely to come across anyone on a Monday morning hunting. However, to be on the safer side of things, I set up in the parking area rather than somewhere else in the forest.

Source: https://georgiawildlife.com/spirit-creek-forest-wma

Speaking of hunting, Bob WK2Y who lives in Atlanta, reached out to me after my Hiltonia WMA article. He emphasized the need for ops to wear blaze orange in such places whether in hunting season or not because of hunting violations which are more frequent than I realized. (I plan on addressing that topic in a future WMA article.) Because of this, I now always keep a blaze orange vest in my kit for Daisy and me. I’ve ordered a blaze orange hat as well as purchased hot pink magnetic decals for my car. (The website said “hot pink” though I think “bright pink” is more like it but close enough.)

In the parking area was a pine tree perfect for my EFRW. Continue reading Bird Dogging POTA in Augusta, Georgia →

Antenna Tuners, Antennas, Field Reports, Morse Code, News, Portable, POTA, QRP, Videos

Let’s Give it a Go: Pairing the Elecraft AX1 and Emtech ZM-2 Manual ATU

24 Comments

Last month, I received a comment and question from Gordon (KO4AYC) here on QRPer.com:

“I am curious if anyone has used the AX1 with the AXE1 40 meter extender and tuned this antenna for 40 meters using the Emtech ZM-2 tuner?”

For the life of me, I couldn’t remember if I’d tried this combo before.

The ZM-2 ATU is a simple manual antenna tuner that you can purchase either as a fun-to-build kit or fully assembled and tested.

I’ve owned my ZM-2 for many years, and I believe every QRP field operator should have one. They do a brilliant job of matching random wire antennas and taking your resonant antenna to a non-resonant band. Being a manual ATU, they require no power source. If you’d like to read a quick tutorial on tuning the ZM-2, read this previous post.

I figured the easiest way to answer Gordon’s question was to give it a go!

The AX1 does require a counterpoise, so before hitting the field, I did check to make sure there was continuity between the shield of the ZM-2’s BNC connector and the black binding post when the ZM-2 was switched to “GND” for coax antennas. Fortunately, there was! I loved this idea because it meant that no matter the radio, I knew I’d have an easy connection to ground for the AX1 counterpoise.

Blue Ridge Parkway (K-3378)

On Wednesday, February 21, 2024, I grabbed the ZM-2, AX1, and AXE 40M coil (since Gordon specifically asked about 40M) along with my Yaesu FT-818ND. It was time to see just how effectively the ZM-2 might match the AX1.

I store my AX1 in this Maxpedition pouch (see link in gear section below).

Upon arrival, I began setting up the station.

Even though it was approaching 2:00 PM locally, I wanted to see if the ZM-2 would match the AX1 (with AXE coil) on 40 meters first. I didn’t expect a lot of activity on that band so early in the afternoon, but I figured I could hopefully work a couple of stations.

I attached the AX1 directly to the ZM-2 antenna port and deployed the whip and 40M counterpoise.

It was a bit gusty, and I quickly realized that the AX1 might topple over in the wind. To secure the antenna, I used the handle of my GR1 backpack. It was a semi-effective arrangement (actually, the handle sort of pulled the antenna toward the pack, which wasn’t ideal either–I eventually removed it).

In calm conditions, I wouldn’t worry about the antenna toppling over; the ZM-2 provides enough of a base that it’s stable. In the wind, though, you’ll definitely need to secure the ZM-2/AX1 combo to keep it from being blown over.

My plan was to start on 40 meters, then also hit 30, 20, and 17 meters. This would give me an opportunity to see if the ZM-2 could match the AX1 on multiple bands.

Side note: I can’t remember if I mentioned this in a previous field report, but one sad bit of news for me is that there’s a new source of QRM at the Folk Art Center. It’s likely coming from the VA medical complex next door, but it raised the noise floor to at least S5 on most bands. This will make it more difficult for me to work weak signals from this particular POTA site.

Then again? My buddy Alan (W2AEW) recently pointed out to me that compromised antennas like the AX1 don’t feel the effects of local QRM as a higher-gain antenna would. I’d been thinking the same thing.

Gear:

Note: All Amazon, CW Morse, ABR, Chelegance, eBay, and Radioddity links are affiliate links that support QRPer.com at no cost to you.

On The Air

I hopped on the air and started calling CQ POTA on the 40-meter band. I worked one station quickly (thanks, W5GDW) and then silence. I didn’t expect 40 meters to be active this time of day, but I didn’t think it would be completely dead either.

I checked the POTA spots page and discovered that the connection to the Reverse Beacon Network was down. Even though I scheduled the activation, the system hadn’t spotted me.

Once spotted, I worked three more stations in quick succession.

I didn’t hang around on 40 meters. Continue reading Let’s Give it a Go: Pairing the Elecraft AX1 and Emtech ZM-2 Manual ATU →

Accessories, Antennas, Field Reports, Morse Code, News, Portable, POTA, QRP, Videos

POTA by Lantern Light: One Activation in Two Days with Two Antennas!

21 Comments

On Friday, February 9, 2024, I had an opportunity to do an extended Late-Shift POTA activation in Pisgah National Forest. I couldn’t pass that up!

Once again, one of my daughters had a casting call and a Shakespeare performance that opened up an activation window from about 17:00 – 20:00 local (22:00 UTC – 01:00 UTC).

If you’ve followed my POTA activities for a while, you’ll note that multi-hour activation windows are very much a rarity. More often than not, I’m squeezing activations into 30-60 minute windows of time as I go about my work and family duties.

Pisgah National Forest and Game Lands

The closest POTA site, once again, was Pisgah National Forest (K-4510) and Pisgah Game Lands (K-6937). There are so many sites to choose from within Pisgah; it’s always a difficult decision in terms of picking a location.

In this case, I decided to stay a little closer to mobile phone service just in case my family needed to reach me during that time. I chose the Sycamore Flats picnic area and was happy to see that the picnic shelter was available.

I thought it might be fun to set up two antennas since I had so much time. For the first part of the activation, on 20 meters, I would deploy the Chameleon MPAS Lite vertical.

For the second part (the following UTC day), I would deploy my MM0OPX 40-meter end-fed half-wave as I knew 40 meters would be much more active after sunset.

EFHW Deployment

Since sunset was approaching, I deployed my MM0OPX EFHW first because it’s much easier to deploy a wire antenna in a tree when it’s still light outside.

Side note: I mention in the activation video that a good headlamp (like my Fenix) makes working in the dark quite easy. I’ve deployed wire antennas after sunset with headlamps before–it’s quite doable–but I still prefer using a throw line when there’s still sunlight. It’s just easier (for me, at least) to judge distance.

I deployed the EFHW in a tree and in the brush between two pathways. While it would have been easier to deploy it on a path, I always try to deploy my wire antennas in a way that hikers and other park guests wouldn’t easily walk into them–especially at dusk when even high-visibility line colors are difficult to see.

Chameleon Carbon Fiber Tripod

The second antenna deployment was my Chameleon MPAS Lite vertical, and this activation gave me an excuse to test the new Chameleon carbon fiber portable tripod.

In January, Chameleon sent me a box with a few of their smaller accessories/promotional items. I plan to give away everything, save the tripod, in an upcoming QRPer giveaway.

I’ve been eager to test the tripod because it’s lighter and easier to transport (in my SOTA pack) than the stainless spike that comes with the MPAS Lite antenna system. This tripod will also come in handy when operating at parks that don’t allow stakes in the ground. Continue reading POTA by Lantern Light: One Activation in Two Days with Two Antennas! →

Conferences, News, QRP

Conf’ QRP: A new QRP gathering in France, May 18, 2024!

6 Comments

Many thanks to Yannig (F4IUJ), organizer of a new QRP conference in Rennes, France, who shares the following announcement and poster:

[Conf’ QRP] is going to take place in Rennes on the 18th of May of this year, there is more information on this page : https://ara35.fr/conf-qrp/

Antennas, Field Reports, Guest Posts, News, Portable, POTA, QRP, SSB

SSB Style: Mark pairs the Elecraft KX3 and AX1 for some challenging activations

24 Comments

Many thanks to by Mark (W2ITG) who shares the following field report:

Elecraft KX3/AX1 Field Report

by Mark (W2ITG)

I’m an avid POTA activator and wanted to try an experiment to see if I could complete an activation using just the Elecraft KX3 & AX1 on 40 & 20m SSB. I’ve seen others do it on CW but not on SSB. My CW learning is not going well by the way.

This was at K-1635 Washington Rock State Park 02-07-2024, with a beautiful view of the NYC skyline approximately 20 miles away.

My 1st attempt was a failure because I ran into SWR issues on 20m when I picked up the microphone & RF was getting into the audio as well. This was with the antenna mounted directly on the side of the radio using a 90 degree elbow connector, the AX1B bipod & an elevated radial connected to one of the case screws of the radio, unfortunately it didn’t work.

It’s a good thing I had brought along my Tuftln EFHW and telescopic carbon fiber fishing pole as well because it saved the day which allowed me to complete the activation. When activating make sure to have a backup plan, so far I have no incomplete activations.

Fast forward to 02-27-2024 I’m making another attempt but using a clamp mount, clamped on to the side of the picnic table, 25’ of ABR Industries RG-316 with built in CMC choke, the Elecraft AXT1 tripod adapter, and an elevated counterpoise.

I was much more successful, but barely. I did get my 10 contacts, 7 on 40m and 3 on 20m. This really took me by surprise as the AX1 is more of a compromise on 40 than it is on 20m.

Radio set up at a different picnic table.
This clamp mount was taken from one of my BuddiStick setups.
Notice the electric fence post in the background to elevate the counterpoise.
The QSO map, it took me an hour and a half to get these 10 contacts.

Using the AX1 was quite the challenge to say the least. It does prove that even with a very limited antenna you can make contacts. My guess as to why it didn’t work as well on 20m, is poor band conditions. Living in the very populated northeast is what I believe allowed me to make more contacts on 40m.

Would I recommend buying this antenna? Most definitely, just as long as you know what it’s limitations are. I will try another attempt, but by trying 2 elevated counterpoise wires instead of 1. This antenna can use all the help it can get.

Accessories, Field Radio Kits, News, Portable, POTA, QRP, QRP Radios, Reviews, Videos

Elecraft KH1 Tabletop Mode: The new KHRA1 Right-Angle Adapter makes for a super-portable POTA machine!

22 Comments

It’s funny how sometimes one small accessory can have a huge impact on a field radio kit.

When I first learned about the Elecraft KH1 (basically, the day I was invited to join the volunteer testing group), I felt like Elecraft had designed my ideal QRP radio. The KH1 is super compact, weighs 13 oz completely loaded, covers my favorite bands, and has features I would expect in much pricier radios. It reminded me of my beloved KX1, but even more portable with more features.

The KH1 caters to handheld or pedestrian mobile operating–at least, that was the overarching design objective. It accomplishes this amazingly well. It’s so easy to operate handheld, and there’s nothing else quite like it on the market. I suspect that when others copy the design (I’m sure they’re already doing so–!) it won’t be as versatile, functional, and lightweight.

At the end of the day, though, I feel like I’m only using the KH1 pedestrian mobile about 30% of the time I have it on the air. Of that 30%, I’d say that only 10% of the time I’m pedestrian mobile while activating, and 20% of the time I’m doing little impromptu radio sessions in parking lots, ballparks, while visiting family, and even on my own mountain property.

While handheld operating is simply a game-changer, I knew I wouldn’t do this 100% of the time with the KH1. It’s for this reason that my very first bit of proper KH1 feedback to Elecraft, well before I had my hands on a prototype, was that a right-angle adapter for the whip antenna would truly round out the KH1’s field prowess.

This would basically give my KH1 the same functionality of my beloved KX2 and AX1 antenna combo, but in an even more portable package.

Turned out, Elecraft already had a right-angle adapter on the design board!

Fast-forward to present day…

Last week, Elecraft sent me a prototype of the right-angle adapter to test and evaluate. They’ve given it the model number KHRA1.

Full disclosure: Elecraft also gave me permission to post a video and article about this new accessory even though (at time of publishing) it’s not even showing up on their website. I will, however, link to it here as soon as Elecraft makes it available. This is an item I would otherwise have tested in private–thanks, Elecraft!

The KHRA1: Small accessory, big impact!

Illustration Source: Elecraft KHRA1 Instruction Manual

The KHRA1 is a simple adapter. Other than metal attachment hardware, most of it is lightweight and 3D-printed from a durable material (I assume the same material they use in the KH1).

Attaching it to the KH1 is very easy.

First, you unthread the large metal thumb nut from the KHRA1. You will need to hold together the remaining KHRA1 components (legs and attachment bracket) so that they don’t come apart before you attach them to the KH1. This is actually pretty easy to do, but users should know to follow the KHRA1 instruction sheet. If these parts fall apart in the field, it might require a bit of searching the ground for the pieces.

You simply thread the large thumb nut onto the KH1’s whip antenna antenna port, then thread the rest of the KHRA1 bracket/legs onto the large thumb nut.

Check out Elecraft’s illustration:

I then position the KHRA1 legs as shown above, then tighten the KHRA1 adapter so that everything is secure.

It’s super simple to do, and you can see this process in my activation video below.

Speaking of an activation…

On Saturday, March 2, 2024, (yes, only two days ago) I had my first small window of opportunity to squeeze in a POTA activation and test the KHRA1.

That day, my daughters and I had a number of errands to run, then a three-hour round-trip drive to pick up my wife. We were on a very tight schedule, but I had a 30-ish minute window of opportunity to fit in some POTA radio therapy.

I set my sights on the easiest-for-me-to-hit POTA site on the Blue Ridge Parkway: the Folk Art Center.

Amazingly, I discovered that morning, that the KHRA1 fits in my Pelican M40 Micro case along with my KH1, whip, counterpoise, key, spare N6ARA key, and earphones.

With the KHRA1, this means my M40 field kit can do both pedestrian mobile and tabletop operating. Woo hoo!

The weather that morning was simply glorious. A very wet front swept through the previous day leaving behind clear skies and warm temps. Frankly, it was a bit odd activating without wearing a jacket or hoodie.

Gear:

Note: All Amazon, CW Morse, ABR, Chelegance, eBay, and Radioddity links are affiliate links that support QRPer.com at no cost to you.

On The Air

Setting up was quick and easy, even though this was my first time using the KHRA1 in the field.

I hopped on the air and started calling CQ. Once spotted (for some reason the RBN auto-spotting feature wasn’t working again), the contacts started flowing in.

I worked a total of 18 contacts in 16 minutes. It hardly gets better than that for a CW activation!

I had to call QRT after my 18th contact. Even though I had a 30-minute window to POTA, nearly 14 minutes of that was taken up with my intro and summary for the activation video.

I called QRT with a small pileup still in place. I really hate doing that, but I had a schedule to keep!

QSO Map

Here’s what this five-watt activation with a 4′ telescoping whip antenna looked like when plotted out on a QSO Map:

Activation Video

Here’s my real-time, real-life video of the entire activation.  As with all of my videos, I don’t edit out any parts of the on-air activation time. In addition, I have monetization turned off on YouTube, although that doesn’t stop them from inserting ads before and after my videos.

Note that Patreon supporters can watch and even download this video 100% ad-free through Vimeo on my Patreon page:

Click here to view on YouTube.

A super-portable, low-impact POTA machine!

The KH1 works amazingly well as a tabletop radio when combined with the KHRA1 adapter.

At the end of the day, the KHRA1 is a very simple piece of hardware, but it effectively transforms the KH1 from a handheld radio to a tabletop.

Of course, I’ve used the KH1 numerous times with wire antennas in a tabletop configuration (I’m a massive fan of wire antennas) but the ability to use the 4′ whip antenna and internal KH1 loading coils means that I can operate anywhere I have a surface.

As I mentioned in a previous post, in some cases, low-impact, and low-profile are key to positive park relations.

Herein lies the thing I love about my KX2/AX1 pairing as well. It’s just with the KHRA1, the KH1 makes for an even smaller, lighter-weight field kit.

Any negatives? The only one I’ve come up with is that the KH1 is so lightweight that I realize I need to carry a small piece of shelf liner (something like this) to provide the KH1 with a bit more grip on a slick park table, especially those composite ones.

Again, I will update this post when Elecraft announces KHRA1 pricing and availability.

Thank you

I still can’t believe the entire kit fits in this small case. Even when I put the KHRA1 thumb screw on backwards!

Thank you for joining me on this quick little tabletop activation!

I hope you enjoyed the field report and my activation video as much as I enjoyed creating them!

Of course, I’d also like to send a special thanks to those of you who have been supporting the site and channel through Patreon, and the Coffee Fund. While certainly not a requirement as my content will always be free, I really appreciate the support.

As I mentioned before, the Patreon platform connected to Vimeo make it possible for me to share videos that are not only 100% ad-free, but also downloadable for offline viewing. The Vimeo account also serves as a third backup for my video files.

Thanks for spending part of your day with me!

Have an amazing week ahead and play some radio!

Cheers & 72,

Thomas (K4SWL)