Category Archives: New Products

Antennas, Field Reports, New Products, News, Portable, POTA, QRP, Reviews, Videos

QRP POTA and testing the new JNCRadio MC-599 portable dipole antenna!

February 23, 2024 Thomas Witherspoon 7 Comments

In late December 2023, I received a package from Jesse at JNCRadio/Chelegance. It was their new MC-599 portable dipole antenna. They sent it—full disclaimer: at no cost to me—for evaluation, but shortly after receiving it, life got crazy and I was delayed in taking it to the field.

Fast-forward to February, and I was eager to take it to the field and see how it might perform. On February 5, 2024, a nice window of opportunity opened in the afternoon while one of my daughters was rehearsing A Midsummer Night’s Dream with her cast. Pisgah National Forest and Game Land were a 20-minute drive from her meeting site, so I headed there to deploy this new antenna.

The JNCRADIO MC-599

On-site, I pulled out the two main components of the MC-599 dipole system: the bespoke padded bag holding the antenna and the portable mast.

I knew the basics about assembling the MC-599 because I had watched a video on the Chelegance website that morning.

However, this was the very first time I had deployed the MC-599. I had never even removed any of the antenna components from the padded bag.

With this antenna, it’s best to have an open area for the two sides of the dipole (two telescoping whips) to fully extend without touching tree branches, etc. I had one particular picnic site in mind at the roadside picnic area I chose, but a couple was having a picnic there when I arrived. I waited to see if they might be leaving soon, but they weren’t, so I chose a site I had used before, even though it was flanked by trees.

Assembly was easy: I simply attached the center of the dipole to the 13′ mast, then attached the two telescoping whips to either side and extended them to the 20M position silkscreened on the whip (identical to the MC-750 vertical markings—see below).

Next, you simply attach your coax to the center of the dipole, then extend the mast all the way up.

I had to avoid touching tree branches, but it actually fit quite easily into this small space.

Since it was a bit breezy, I used some line to guy the mast. Ideally, you’d want a minimum of three guying points, but I only had two lines with me, so I made do, and it worked fine—the antenna was stable.

Next, I set up my radio: the Yaesu FT-818ND. Since the MC-599 was, in theory, resonant, I didn’t need an ATU for a match.

I turned on the FT-818 and discovered that the SWR was a perfect 1:1. Amazing.

I suppose I shouldn’t have been surprised because my Chelegance MC-750 is always perfectly resonant (without needing a transformer) simply following the whip markings for guidance.

I should note here that the MC-599 can handle up to 200 Watts PEP—I was pushing 5-6 Watts. Also, the frequency range using the whips is from 20-6 meters. Chelegance also includes two 7 MHz wire elements that can be deployed in an inverted vee shape to play radio on the 40-meter band. It’s an efficient system and has many fewer components than a Buddipole systems I’ve used in the past.

Gear:

Note: All Amazon, CW Morse, ABR, Chelegance, eBay, and Radioddity links are affiliate links that support QRPer.com at no cost to you.

On The Air

Keep in mind that my POTA site was in a deep valley, flanked by high ridge lines–I wasn’t sure what to expect as I hopped on the air.

I started calling CQ POTA and the first station I heard was DL1OK operating in Spain as EA8/DL1OK. Logging Dmitrij was a good sign indeed for this portable dipole!

Stations kept flowing in. I worked my first ten contacts in ten minutes.

I continued working stations in a continuous pileup until I ran out of time. I ended up logging a total of 46 contact all within 50 minutes. I did spend a few extra minutes (as I always do) trying to pull out weak stations and slower code stations.

What fun!

QSO Map

Here’s what this five-watt activation looked like when plotted out on a QSO Map.

Note that this map does not include my contact with EA8/DL1OK in Spain:

Activation Video

Here’s my real-time, real-life video of the entire activation. As with all of my videos, I don’t edit out any parts of the on-air activation time. In addition, I have monetization turned off on YouTube, although that doesn’t stop them from inserting ads before and after my videos.

Note that Patreon supporters can watch and even download this video 100% ad-free through Vimeo on my Patreon page:

Click here to view on YouTube.

MC-599 notes

I’ve got to admit: the MC-599 made a great first impression.

As with the MC-750, I’m most impressed with the build quality. The components are all sturdy and nicely machined. The padded case was custom made to hold the MC-599 and its components. Everything fits together as it should and—again—was resonant when deployed according to the whip markings.

Even on this inaugural deployment, it didn’t take long to set up. The next time I deploy it, it will go even faster. Packing it up afterward (as you can see in the video) went very quickly.

Keep in mind: the MC-599 is a low-impact, high-profile antenna.

If you’re at a site that doesn’t allow antennas in trees, the MC-599 could be an excellent option. Other than using optional guy lines that would require tent stakes in the ground, it would have no impact on park grounds.

I love the fact that the MC-599 is self-supporting. This would be an absolutely brilliant antenna to use at parks with wide-open spaces and few trees for support.

That said, it is not a stealthy antenna. In fact, portable dipole antennas are some of the most conspicuous portable antennas you could deploy. They’re maybe slightly less conspicuous than a hex beam or Yagi. Even though I was cloaked by a few trees, the couple that was occupying the picnic site I had hoped to use couldn’t help but stop by on their way out and ask what it was I was doing. I bet if I had been using a wire antenna, they wouldn’t have even seen it.

I would always ask permission before setting up an antenna like the MC-599 at, say, a small historic site or urban park.

I could also see using the MC-599 for SOTA (Summits On The Air), but primarily on summits that are either drive-up, or where the hike is minimal. The aluminum alloy mast is lightweight for its size, but it’s quite large to consider taking on an extended hike. However, for a nice drive-up summit, I imagine you could work some serious DX. Just bring a few guy lines in case it’s windy.

I do think the MC-599 would make for a great Field Day antenna. Since it can handle up to 200W PEP and is easy to lower and switch bands, it would be a brilliant portable option for those operating a multi-band 100W rig.

But obviously? It’s an exceptional performer with QRP power. It’s hard to beat a dipole even when it’s only 13′ off the ground.

Thank you

Thank you for joining me on this fun activation!

I hope you enjoyed the field report and my activation video as much as I enjoyed creating them!

Of course, I’d also like to send a special thanks to those of you who have been supporting the site and channel through Patreon, and the Coffee Fund. While certainly not a requirement as my content will always be free, I really appreciate the support.

As I mentioned before, the Patreon platform connected to Vimeo make it possible for me to share videos that are not only 100% ad-free, but also downloadable for offline viewing. The Vimeo account also serves as a third backup for my video files.

Thanks for spending part of your day with me!

Cheers & 72,

Thomas (K4SWL)

Accessories, New Products, News

New Chameleon Products

December 30, 2023 Thomas Witherspoon Leave a comment

Many thanks to Don (W7SSB) who writes:

We have several new products we just released. Please look at out website: www.chameleonantenna.com

There are several more products coming soon !

Thanks for the tip, Don!

New Products, News, QRP Radios

More photos of the Xiegu X6200

December 28, 2023 Thomas Witherspoon 12 Comments

Many thanks to my buddy, Don (W7SSB), who shares the following photos and product brochure of the yet-to-be-released Xiegu X6200.

The X6200 is not yet in the hands of reviewers, nor is it in production. This hasn’t stopped some people from “reviewing” this unit, so take anything you read up to this point with a grain of salt. A lot of folks have asked me what I think about the X6200, but I won’t comment until I’ve actually gotten a unit and tested it in the field.

I do have a few notes:

I hope Xiegu takes time to have the X6200 thoroughly field-tested prior to production. In the past, early adopters have really taken on the role of Beta testing; it all makes for a very confusing evaluation period. In the same vein, I hope that more of the advertised functionality works from day one.
Xiegu mentions that this unit has improved receiver sensitivity and a lower noise floor–both of these are most welcome. I hope this equates to more refined audio as well.
I hope the receiver front end is more robust and has built-in BCI filtering. Previous models have suffered from overloading.

Of course, I will plan to review the X6200 and give it a thorough shake-down.

Photos:

(Click on images to enlarge.)

Product brochure

Click here to download the preliminary product brochure (as of Dec 28, 2023). [PDF]

Antennas, Field Reports, New Products, News, Portable, POTA, QRP, SSB, Videos

SSB and CW QRP POTA: Testing my new KM4CFT End-Fed Antenna Kit!

December 12, 2023 Thomas Witherspoon 12 Comments

A few weeks ago, I mentioned that Jonathan (KM4CFT) sent me one of his new QRP end-fed half-wave/random wire antenna kits.

When my friend, Alan (W2AEW), caught wind that I planned to buy some 26AWG wire for this build, he sent me a spool of wire from a large reel he’d recently picked up at a hamfest.

What a nice guy! The blue wire is absolutely ideal for portable antennas.

Being the nice guy he is, Alan actually published a video about building Jonathan’s antenna kit on his YouTube channel. I highly recommend watching it!

Before I received the kit, I already knew what type of antenna I’d build: a 30 meter end-fed half-wave (EFHW) linked with a 40 meter extension. This antenna design has been on my mind for some time and Jonathan’s kit was the perfect excuse to build one.

Why a 30M EFHW with a 40M extension? Because a 40M EFHW gives me excellent SWR matches on 40, 20, 15, and 10 meters without needing an ATU. A 30M EFHW gives me matches 30 and 17 meters.

Thus, with one linked wire antenna, I can cover 40, 30, 20, 17, 15, and 10 meters! That’s a lot of bands!

And since the antenna needs no extra matching, it’ll work with my transceivers that lack an internal ATU.

The Mountain Topper MTR-5B I acquired earlier this year.

In fact, I originally thought about this antenna design to use with my Mountain Topper MTR-5B which covers 40, 30, 20, 17, and 15 meters.

I built this antenna by first trimming it for a 1:1 match on 30 meters including a loop and strain relief to attach the extension.

When I was satisfied with my 30M EFHW, I then made the 40M extension, attached it to the 30M section with 2mm bullet banana connectors, then trimmed the antenna for a 1:1 match on 40M.

I spent the better part of 60 minutes trimming this antenna. I feel like patience really pays off because it’ll set up the antenna for good matches on all of the upper harmonics. Admittedly, I was a bit pressed for time that day, so I only tested this antenna in one configuration (an inverted vee shape) so hadn’t checked the SWR as a sloper or vertical.

My advice is to aim for a 1.3:1 or better match on 30M and 40M–that should be very doable if you wound your transformer correctly.

This was my first attempt at making in-line links, so I wouldn’t consider link my method as a “best practice”–rather, check out K7ULM’s guidance for making in-line links. Continue reading SSB and CW QRP POTA: Testing my new KM4CFT End-Fed Antenna Kit! →

Field Reports, New Products, News, Portable, POTA, QRP, QRP Radios, SOTA, Videos

My first SOTA activation with the new Elecraft KH1 handheld QRP transceiver!

November 6, 2023 Thomas Witherspoon 14 Comments

On Friday, November 3, 2023, I had planned to activate Mount Mitchell–the highest summit in eastern North America. I need to activate Mitchell soon because I’ve yet to activate it for SOTA in 2023 and when winter weather sets in (quite early at that altitude) the park is inaccessible.

Unfortunately, last week, the National Park Service closed an 8 mile portion of the Blue Ridge Parkway due to (no kidding) park visitors feeding and trying to hold bears at the Lane Pinnacle Overlook.

I won’t get on my soapbox about how people are so out of touch with nature that they feel human interaction with bears is a good thing. It breaks my heart because as we natives of WNC say, “a fed bear is a dead bear.” Bears that become comfortable with humans become (at best) a nuisance and (at worst) aggressive. This is bad for people and it’s bad for our bears who are otherwise shy and avoid humans.

Okay, I said I wouldn’t soapbox about this…

That 8 mile section being closed meant that what would have been a 50 minute drive to the summit of Mitchell turned into a 90 minute drive. Round trip, I simply couldn’t fit that in my day, so I made alternate plans.

Another summit on my list to activate before year’s end was Richland Balsam.

Richland Balsam is actually the highest summit on the Blue Ridge Parkway and is, in fact, at one of my favorite points along the parkway.

That Friday morning, I dropped my daughters off at their classes and drove an hour or so to the Haywood-Jackson Overlook.

In the valley, as I started my drive to the parkway, past the Cradle of Forestry, it was 30F/-1C. I was concerned that on the summit–nearly 4,000′ higher in elevation–that the temp would be closer to 20F. Fortunately for me, as I gained elevation, the temperature climbed too. We were having inversion that day so the higher altitudes were actually warmer than lower altitudes. This is not uncommon in the fall and was very welcome that particular Friday morning!

Richland Balsam (W4C/WM-003)

Only three weeks earlier, there would have been no free parking spots at the Haywood-Jackson Overlook overlook–it would have been packed.

Fortunately for me, all of the leaf-lookers had gone and I literally had the place to myself. What a luxury!

And the temperature? A balmy 43F/6C.

The hike to Richland Balsam is one of the easiest along the parkway.

At the north side of the parking area, you’ll see a trailhead for the Richland Balsam Nature Loop Trail.

I wish my iPhone camera could haver truly captured how the moon looked in the sky.

The trail isn’t long; I believe the entire loop is just shy of 1.5 miles.

Although I didn’t set out to do this, I ended up making a video of the entire loop trail hike along with the activation (of course, you can skip over those parts in my activation video below).

Sadly, one thing you won’t be able to enjoy in my video? The smell. The air is filled with the fragrance of balsam trees along the entire trail–it’s just amazing!

The summit of Richland Balsam is at 6,410 feet ASL (1,954 meters).

The summit is covered in trees which is brilliant for SOTA activators. Another luxury is that there are two benches within the activation zone. I did pack my Helinox Zero chair as a backup, but didn’t need it.

SOTA with the KH1

Setting up my KH1 for a SOTA activation couldn’t be easier or faster. I show the whole process in my video at a very casual pace. Continue reading My first SOTA activation with the new Elecraft KH1 handheld QRP transceiver! →

Antennas, New Products, News, Portable, QRP, Videos

Tiny EFHW and EFRW Kits by KM4CFT

November 5, 2023 Thomas Witherspoon 9 Comments

Long time QRPer.com contributor and supporter, Jonathan (KM4CFT) has designed and started producing ultra-compact end-fed antenna kits (eBay affiliate link).

His end-fed antennas are incredibly small, thus perfect for portable operations. They remind me very much of K6ARK’s end-fed wire antenna kits, but a little easier to build because the board is larger and there are no surface mount components.

Jonathan sent me one of his end-fed kits (assembled) a couple weeks ago, but I’ve yet to trim mine due to my crazy schedule and activities as of late (well, that I need need to order more wire!). I will take this antenna to the field this month, but the video may not show up for a few weeks.

W2AEW Builds the KM4CFT UNUN

This morning, I learned that my good friend Alan (W2AEW) published a video where he builds, tunes and tests Jonathan’s QRP End Fed UNUN kit:

Click here to watch on Alan’s (excellent) YouTube channel.

Alan’s video is superb. If you purchase this EFHW kit, I’d encourage you to watch his build. (And subscribe to his channel!)

How to purchase

Jonathan is selling his antenna kits on eBay–click here to check it out. The price is $29.95 plus a modest shipping fee. I think it’s an excellent deal.

Of course, you’ll need some wire for your radiator and/or counterpoise.

I plan to build mine with a 30 meter link to pair with my Mountain Topper MTR-5B.

Click here to check out the antenna kit on eBay. (note: this is an eBay partnership link that supports QRPer.com)

Click here to download the detailed assemble guide.

New Products, News, Pedestrian Mobile, Portable, QRP, QRP Radios

Elecraft KH1 Super Power? Anytime/Anywhere POTA/SOTA Hunting!

November 4, 2023 Thomas Witherspoon 13 Comments

Photo from morning SOTA activation on Richland Balsam.

Yesterday morning, I took my Elecraft KH1 to the summit of Richland Balsam and performed a SOTA activation using only the KH1’s whip antenna on 20 meters (I ran out of time to hit 17 and 15M).

It was insane fun. Without really intending to, I actually filmed the entire hike to the summit, entire activation, and the hike back to the car. I’m not sure I’ve ever done that before. I plan to post the video by Monday (Nov 6) if at all possible (again, trying to push my KH1 videos to the front of the line for a little while).

Parking Lot Pedestrian Mobile

After the SOTA activation, I drove back to town to pick my daughters up at their acting class. I arrived about 20 minutes before the class ended and thought, “why not pull out the KH1 and see if I can hunt some POTA activators–?”

I opened the trunk of the car, grabbed the KH1 from my SOTA pack and then decided to even film this short, impromptu hunting session.

As you’ll see in the video below, it took no time at all to deploy the KH1, hop on the air and work a couple of stations.

Short Video:

Click here to view on YouTube.

I could have also chased some SOTA activators, some DX, or just looked for a random ragchew with someone calling CQ.

I like hunting/chasing POTA and SOTA activators, though, because the time commitment is manageable. For example, by the time I ended this video, my daughters and one of their friends were already hopping in the car to hit the road. I didn’t have to apologize to anyone for ending a QSO early. 🙂

November is KH1 month

I decided that I’m only going to use the KH1 both in the field and in the shack during the month of November. The only exceptions will be other radios I need to test or if I need to make contacts outside of the 40-15 meter KH1 window.

One of the big reasons for this level of commitment is that I am in the testing group of the KH1. This is how we flesh-out any minor issues that may have gone unnoticed.

Another reason is I do plan to post a comprehensive review of the KH1 eventually and I only feel comfortable doing this after I’ve spent dozens of hours with a radio.

If I’m being honest, another reason is that I absolutely love this anytime, anywhere radio. It’s so insanely portable, I take it with me everywhere. The KH1 and I have been inseparable since last Monday when I took delivery. And, yes, I’m still contemplating what her name will be.

Note that I will post some of my other activations videos this month (I’ve quite a few out there!) and I will also post the occasional bonus video exclusively on Patreon. Indeed, I posted a video on Patreon yesterday where I paired the CHA F-Loop 2.0 with my Icom IC-705.

Stay tuned for more radio goodness and I hope everyone has an amazing weekend!

72,

Thomas (K4SWL)

New Products, News, Portable, QRP Radios

Update: Some Elecraft KH1 Initial Notes

November 1, 2023 Thomas Witherspoon 36 Comments

I’ve had the Elecraft KH1 in my hands now for a little over 24 hours. I had hoped to squeeze in a POTA activation yesterday, but the stars did not align. I had way too many dad responsibilities on Halloween.

I hope to correct that today with a POTA activation, if I can squeeze it into a hectic afternoon. It’ll be a cold, blustery one for sure!

Yesterday, I did fit in a couple of opportunistic contacts with the KH1 along with some morning on-the-air time in the home office while working on projects.

Since I’ve gotten so many questions about the KH1 since Monday, I thought I’d share a few random answers and notes here.

Does the KH1 work on a desktop?

Quite a few of you have written in to ask how well the KH1 works on a desktop. Some have mentioned that they like the size of the KH1, but don’t see themselves doing the pedestrian portable thing.

The answer is, the KH1 works really well as a small desktop transceiver.

In fact, yesterday morning, if I made contact with you, it was with the KH1 on my desktop while I was plugging away on spreadsheets in the office.

Elecraft designers cleverly positioned the AF Gain and Encoder knobs so that they’re accessible when the radio is lying flat on its back.

As you can see in the photo above, the key plug is positioned between the two knobs, but there’s enough separation there that you don’t feel your key cable is in the way while making adjustments. Of course, the rest of the controls are on the top, so they’re very accessible.

To be clear, I prefer using my KX2 or KX3 on a desktop (they were designed for this), but I feel the KH1 works quite well.

In fact, for the average 30-60 minute park activation where I’m connected to a wire antenna? I see myself using the KH1 on a tabletop. I’ll operate pedestrian portable when doing SOTA and fitting in those little opportunistic and impromptu radio sessions.

Ergonomics/Features

The ergonomics of the KH1 are excellent. It was designed to fit in the palm of your hand, and it does this perfectly. Continue reading Update: Some Elecraft KH1 Initial Notes →

New Products, News, Portable, QRP

The Elecraft KH1 has arrived! (A few photos…)

October 30, 2023 Thomas Witherspoon 43 Comments

I’ve gotten a lot of email and comments asking when my KH1 would arrive and I’m happy to report that I picked it up this morning at the post office!

I ordered the “Edgewood” package, thus the KH1 with all of the trimmings. I was shipped the full radio kit save the logging tray/cover.

The logging tray had a last minute hardware change. Elecraft kindly shipped the radio first and the logging tray will follow in a few days.

I must say: the KH1 is even smaller than I imagined.

Quick video

I made a very short video as I opened the box for the first time. To be clear, it doesn’t likely meet the requirements of an “unboxing” video, because, frankly, I really don’t understand those types of videos. It’s just me opening the box and holding the radio for the first time.

Click here to view on YouTube.

Hunting POTA!

I popped the included battery on my Elecraft fast charger and gave it a good 90 minutes of charge while I did some yard work.

Of course, I couldn’t wait to hop on the air, so I attached the whip antenna and the counterpoise, then hit the ATU button for a 1.2:1 match on 20 meters.

I then opened POTA.app and tuned to a couple of POTA activators.

First up was KK4WDP who was activating K-0784 in Washington DC.

I was still sorting out a few of the adjustments on the KH1 (keyer speed, sidetone level, AF gain, etc.) so I can’t say my exchange was “graceful.” (If you’re reading this, Josh, that’s my excuse and I’m sticking with it.)

I moved slightly off frequency to delineate my tone, which I think helped punch thorough. On this end, I could hear a couple of strong stations calling at the same time. DC is almost too close for 20 meters this time of day, but I received a 22N report. Thanks, Josh!

Next, I tuned to 14059 MHz where NR1D was activating K-1706.

I called and got a reply on the first try. I can’t remember the report he sent, but he was a solid 5NN. Thanks so much for working me, Kent!

Photos:

I haven’t seen a lot of up-close product photos yet, so I thought I’d share some here. Again, note these don’t include the logging tray, but I will post more photos when it arrives soon.