Tag Archives: Tuttle Educational State Forest (US-4861)

Antennas, Field Reports, Morse Code, News, Portable, POTA, QRP, QRP Radios

Pairing the Elecraft K2 with the AX1 at Tuttle for some QRP P2P DX!

11 Comments

If you recall from my last field report, I’ve been pairing the Elecraft AX1 antenna with a number of radios. For me, it’s been a fun exercise because I always enjoy seeing what sort of results the AX1 might produce. So far, it has never disappointed.

On Thursday, February 2, 2023, I packed two radios in my car with the idea of fitting in two consecutive park activations.

At my first activation of the day–Lake James State Park–I paired the AX1 with my Mission RGO One transceiver. The activation was a blast! Not only did I stay busy working stations, but I also managed a little QRP DX thanks to a hunter from Italy.

K2 and AX1 Under Shelter

Little Guatemala Café

After grabbing a curried chicken salad wrap at Food Matters and a coffee at Little Guatemala roasters in Morganton, I hit my second and final park of the day: Tuttle Educational State Forest (K-4861). It was rainy, so the park was empty which allowed me to take over the very large picnic shelter at Tuttle.

Even though this particular shelter is in a bit of a dip in the land and has a large metal roof, I’ve had successful activations there in the past employing the AX1 antenna.

My hope was that history would repeat itself!

Setting Up

Attaching the AX1 antenna to the back of the Elecraft K2 was not complicated because the K2 has a BNC connector with nothing protruding to get in the way of the Bipod. Continue reading Pairing the Elecraft K2 with the AX1 at Tuttle for some QRP P2P DX! →

Field Reports, Morse Code, News, Portable, POTA, QRP

Pairing the Elecraft KX2 with a 28.5′ random wire for a rapid POTA activation

1 Comment

On Wednesday, January 11, 2023, I was on my way back to the QTH after a brief trip to Raleigh, NC.

Later in the afternoon, I needed to take my daughters to a class, thus I had a strict deadline to meet. Still, it was a beautiful day so I decided to pop by Tuttle Educational State Forest for a nice walk and possibly an activation if I time allowed.  I’d spent so much time in my car the previous couple of days, I really wanted to stretch my legs.

Tuttle Educational State Forest (K-4861)

As I drove to Tuttle, I made a decision to film a Hike & Talk session–I had a topic on my mind and thought the timing was right to make a recording. You can check out that (previously published) Hike & Talk session here.

After that casual walk, I found that I had a good 45 minute window–no more–to fit in a full activation including set-up/take-down. Very doable!

The radio I had packed away for this road trip was my Elecraft KX2 field kit which included a Tufteln no-transformer random wire antenna (compact equivalent of my 28.5′ speaker wire antenna) and my AX1 portable antenna. I had this particular kit because I’d hoped to do an urban park activation in Raleigh, but simply didn’t have the time to fit it in.

Setting up the KX2 is a swift process.

I chose a picnic table, deployed the Tufteln antenna and was on the air in no time! Continue reading Pairing the Elecraft KX2 with a 28.5′ random wire for a rapid POTA activation →

Morse Code, News, Skills

Hike & Talk Session: Conquering the CW Doldrums

8 Comments

A couple years ago, I started making Hike & Talk video sessions covering in-depth topics that are challenging to answer via email or even long-format blog posts.

When I receive a question from a reader and think to myself, “I’d rather answer that in-person than write a reply,” I make a note to do a Hike & Talk session.

These sessions are not scripted, outlined, or formatted in any way shape or form. When I make a Hike and Talk video, I imagine that I’m chatting away with you informally as you join me on a hike or walk.

All this to say that these long-format videos aren’t for everyone, so if it doesn’t sound like your cuppa’ tea, it’s okay to skip it! I promise, I won’t be offended.

Conquering the CW Doldrums

On January 11, 2023, I was driving back from Raleigh and decided that a quick POTA break was in order. That morning, I read an email from a reader and it was on my mind as I drove to Tuttle Educational State Forest. It was a long email, but here are the relevant bits:

Hi Thomas […]I’ve been studying CW on my own for about four months now. I know you advise joining a group like the Long Island CW Club to learn CW but my work schedule simply doesn’t allow for this. I travel frequently and have team members across the globe so my schedule is a mess. I have so little free time.

[…]I’ve been using various CW apps, CW recordings like W1AW and your videos to practice CW. I can’t stress how much your videos have encouraged me along the way because you make this all seem so achievable. I download your videos from Patreon and listen to them when driving, flying, during layovers, and in the evenings in my hotel room. Many times I just listen to your video audio as I would a podcast.

I am not at a point where I can understand all of the contacts you receive, but I do get maybe 1 out of 3. It’s a real thrill to know I decoded a callsign on my own. I see a day when I will do CW activations.

[…]I’m writing though because I feel like I’ve reached a barrier. I know all of my characters and numbers and I continue to do regular CW practice, but I feel like I’m not learning. Like my brain has stopped soaking up the code. It’s discouraging. Do you have any advice for getting through this?

I’ve received similar emails and comments in the past which is proof that you’re not alone if you can relate to this reader.

I’ve certainly been there, too!

Hike & Talk

In this video I will talk about the CW Doldrums, how I related to them, and how I work through them myself.

I include (against my better judgement!) a very long side story about my path to learning French. It relates, but perhaps not how you might think.

Instead of editing my videos, I always try to include chapter markings in the YouTube timeline so you can skip over any sections that aren’t of interest to you.

You’re going to need a few cups of coffee or tea for this one. You’ve been warned!

Click here to view on YouTube.

Thank you

Thank you for joining me on this Hike & Talk session!

If you’re experiencing or have experienced the CW Doldrums yourself, let us know how you work through them in the comments section.

The important part is to know that you’re not alone and that, in fact, the Doldrums are truly a healthy sign that you’re learning CW and your brain is doing it’s thing!

As always, a special thanks to those of you who have been supporting the site and channel through Patreon and the Coffee Fund. While certainly not a requirement as my content will always be free, I really appreciate the support.

Thanks for spending part of your day with me on the trail!

Cheers & 72,

Thomas (K4SWL)

Field Reports, Morse Code, News, Portable, POTA, QRP

Pairing the Penntek TR-45L and PackTenna 20M EFHW for a Quickie POTA Activation

2 Comments

We need to do a little time-travel in this short field report…

In 2022, I accumulated so many activation videos that I have a small backlog and some that got lost in the shuffle. The following activation report is one that I meant to post in November, but it got lost in the shuffle.

So let’s time-travel…

On October 20, 2022, I pulled into Tuttle Educational State Forest to enjoy quick a POTA activation with my Penntek TR-45L.

I remember now that I wanted to hold off publishing this video until John (WA3RNC) at Penntek had time to ship the bulk of the radios from his first production run of fifty units. Demand has been very high for this sweet rig and for good reason: it performs brilliantly, is fun to use, sports amazing audio, and (with its Apolloesque design) strikes the right nostalgia chord for many of us.

Tuttle Educational State Forest (K-4861)

I had a very short window to do this activation–a maximum of 45 minutes or so.  You see, I still had a good 1.5 hour drive back to the QTH and needed to pop by the post office to pick up parcels before they closed at 17:00 local.

I had planned to pair the TR-45L with my PackTenna random wire antenna and use the 45L’s Z-Match tuner, but I discovered I’d packed the PackTenna 20M EFHW instead.

No problem there as the PackTenna 20M EFHW is very efficient and (of course) resonant on 20 meters, so I needed to make sure the TR-45L’s ATU was bypassed before hopping on the air! Continue reading Pairing the Penntek TR-45L and PackTenna 20M EFHW for a Quickie POTA Activation →

Field Reports, Morse Code, News, Portable, POTA, QRP, QRP Radios, QRPp, Videos

POTA with 500 milliwatts CW and 10 watts SSB using the Elecraft KX2 and PackTenna Random Wire combo

17 Comments

I’d like to start this field report with a side story. I’ll keep this reader anonymous since I haven’t asked for permission to post his story (although I’m certain he wouldn’t mind!):

A QRP Christmas Gift

Yesterday, I was contacted by a reader who had just received an amazing gift.

On Christmas morning, his wife presented him with a tiny wrapped box and inside there was a small note:

“Get yourself a great field radio. You have Carte Blanche!” 

What an amazing gift…right–?! She literally said Carte Blanche!

Evidently, she is familiar with my YouTube channel  (poor thing) because he often watches my activation videos on their living room TV. [Between us, I’m a bit surprised she still loves him after subjecting her to my videos.]

She told him, “Run your choice by Thomas before ordering.”

The funny bit? He approached me with this very question in November as he plotted a 2023 radio purchase. He couldn’t decide between the Icom IC-705 and the Elecraft KX2.

He wrote yesterday to tell me that he placed an order for a new Elecraft KX2 with all the trimmings; Elecraft’s KX2 “Shack-In-A-Box” package plus a set of KXPD2 paddles.

The KX2 is back-ordered due to parts availability, so he won’t receive his unit for several months, most likely.

Based on his operating style, I think he chose wisely. The IC-705 is a benchmark field radio, but he was looking for something that he could pair with a random wire antenna (the ‘705 lacks an internal ATU) and that would be easy to use on SOTA activations. He’s new to CW as well and loved the fact that the KXPD2 paddles attach to the front of the KX2.

Why do I mention this story? Because it’s not only fresh on my mind, but it’s the same radio and antenna I used during an activation on Thursday, December 1, 2022.

Tuttle Educational State Forest (K-4861)

As I pulled into Tuttle’s parking area that day I had a tried-and-true field radio kit pairing in my pack: my Elecraft KX2 and PackTenna 9:1 Random Wire antenna.

As I mention at the start of my activation video (see below), with the Elecraft KX2 and a random wire, I could easily activate all of the summits, parks, and islands I desire. It’s such an effective, flexible, and portable combo.

QRPp

To shake things up, I decided to knock the output power of the KX2 down to one half of one watt–500 milliwatts–at least for the CW portion of my activation.

Why not?

Plus, I don’t think I’ve ever validated a POTA activation with 1/2 of a watt, so it might make for a fun challenge! Continue reading POTA with 500 milliwatts CW and 10 watts SSB using the Elecraft KX2 and PackTenna Random Wire combo →

Field Reports, News, Portable, POTA, QRP, SSB

A QRP SSB POTA activation using only the Elecraft KX2’s internal microphone!

3 Comments

Once I started doing CW POTA activations in 2020, there really was no going back.

It’s hard to explain, but CW makes POTA and SOTA activations so much easier, in my opinion.

I’m sure many who’ve ventured down the path of CW understand.  I know devoted SSB operators who started doing CW in the field and pretty much permanently switched to CW. Indeed, that was me.

That said, I do like SSB as well and it has some positives over CW in terms of POTA.

For one thing, there are so many more SSB hunters out there (compared with CW); even on a slow POTA today, you can still amass large pileups. The cadence of SSB exchanges is also faster than that of POTA CW exchanges (which rarely exceed 20 WPM) so it’s easy to log two or even three times the number of contacts in the same amount of time.

In addition–let’s face it–it’s also fun hearing another operator’s voice on the other end.

Many readers have been asking me to do more SSB activations and I’ve been meaning to. Truth is, though, the majority of my field radios are CW-only, so when I have them in tow, SSB simply isn’t an option.

Tuttle Educational State Forest (K-4861)

On Thursday, November 17, 2022, I stopped by Tuttle Educational State Forest for a short hike and, of course, an activation.

It was during my hike that I came up with the idea to do a five watt SSB activation. I quickly realized, though, that the only radio in my car with SSB capabilities was the Elecraft KX2, but I didn’t have a hand mic or headset packed!

Fortunately, the KX2 has a built-in microphone for SSB. It’s not as ideal as my Elecraft/Heil Pro Set, nor even the basic Elecraft hand mic, but it works, so I thought it might be fun to do an entire SSB activation only using the KX2 internal microphone!

Setting up

There’s not a lot to set up when using a KX2; the radio has an internal battery, internal ATU, and since I was using the internal mic, all I needed was an antenna and some feed line.

I chose the KM4ACK 40 meter end-fed half-wave that I built from a kit many moons ago. I hadn’t deployed this particular antenna in the field in ages–it’s a good one, though! Continue reading A QRP SSB POTA activation using only the Elecraft KX2’s internal microphone! →

Field Radio Kits, Kits, Morse Code, News, Portable, POTA, QRP, Reviews

Testing a new QCX-Mini Field Kit built in an Evergreen 56 Watertight case

11 Comments

In early November, I happened up a new waterproof case called the Evergreen 56. As with Pelican cases, it’s waterproof and also made in the USA. Like Nanuk cases (that are also waterproof and made in Canada) Evergreen cases have a built-in locking mechanism to keep the latch from accidentally opening during transport.

I thought the price for the Evergreen 56 at $28 US was fair and in-line with the Pelican 1060 and Nanuk 903 which are similar in size. I grabbed one made of a clear material with one radio in mind: my QCX-Mini!

There are a number of color options available for this Evergreen case, but I like the clear polycarbonate one because it makes it so much easier to see what’s inside (for a quick gear check) but also to confirm that no one part of the kit is being pressed too hard inside the case after the lid is sealed.

After receiving the Evergreen 56, I was very pleased with the quality–again, on par with what I would expect from Pelican or Nanuk.  It is incredibly solid and the seal is watertight.  The Twist Lock Latch (see above) is easy to operate and the case comes with two “keys” for adjusting the inner lock.

The Evergreen case has a soft egg crate-like rubber boot interior as opposed to the pick foam material you’d typically find in a water tight case. The case also has a hammock-like rubbery webbing on the inside of the lid that can be used to organize smaller contents (I knew instantly I’d use this to hold the antenna!).

The QCX-Mini fits in the Evergreen case perfectly–this was no surprise–but I was eager to see if my other station components could also fit. Note that I didn’t buy anything specifically to be used in this case; I used components I already owned. I could minimize the contents even further if I used a smaller battery, antenna, and key.  Here are the components of the first version of the QCX-Mini Field Kit: Continue reading Testing a new QCX-Mini Field Kit built in an Evergreen 56 Watertight case →

Field Reports, Morse Code, News, Portable, POTA, QRP

POTA Plan C: Swapping antennas and rigs at Tuttle Educational State Forest

9 Comments

After the success of my previous day’s activation at Fort Dobbs State Historic Site, I decided to take the Icom IC-703 Plus out for yet another activation.

As I mentioned in the previous post, the IC-703 has not gotten a lot of outdoor time this year because I’ve had issues with the electronic keyer locking up when using the radio with end-fed antennas.

Of course, there are a number of ways to mitigate or radiate the RF that could be coming back to the radio, so at Fort Dobbs, the previous day, I used a simple common mode choke. It seemed to do the trick.

I was curious if using a common mode choke might be the only solution needed to solve this problem, or if I’d need to perform a mod to my IC-703.

I was ready to test the IC-703 again.

I had a fair amount of antenna options in the trunk of my car, so on the way to Tuttle Educational State Forest (on Friday, October 7, 2022), I considered a few options to shake things up a bit.

Since I was feeling comfortable that the common mode choke was taking care of things, I decided to push the limit a bit and deploy an end-fed random wire antenna. I didn’t have any of my mini portable 9:1 random wire antennas in the car (PackTenna, Tufteln, etc.), but I did have another solution: the Chameleon MPAS Lite.

The cool thing about the CHA MPAS Lite is that while it’s primarily designed to be a vertical antenna with counterpoise, it can be reconfigured and deployed a number of ways including as a simple end-fed random wire antenna.

After giving it some thought, I decided it might be fun to deploy it as an inverted V random wire. In fact, here’s a diagram from the MPAS Lite manual of exactly what I planned to do.

I’d be using the MPAS Lite counterpoise as the radiator, so I wouldn’t have the optional second counterpoise as seen in the illustration above. That’s okay, though, because I was feeding the antenna with Chameleon’s 50′ RG-58C/U cable with in-line choke; the shield of the coax would act as the antenna counterpoise.

This is the same coax cable I used the previous day. Continue reading POTA Plan C: Swapping antennas and rigs at Tuttle Educational State Forest →

Field Reports, New Products, News, Portable, POTA, QRP, QRP Radios

My first POTA activation with the Mountain Topper MTR-4B V2

13 Comments

As you might have noticed from past field reports, I’m a big fan of the LnR Precision Mountain Topper MTR-3B. It’s a wee CW-only transceiver that is almost perfectly designed for summit and park activating. It’s so lightweight and compact, you barely notice it in your backpack.

Thing is, the MTR-3B is no longer produced and I’m not sure if it ever will be again, but Steve Weber (KD1JB) hasn’t stopped making iterative improvements to the Mountain Topper design and LnR hasn’t stopped producing them.

In late 2020, LnR introduced the new MTR-4B which replaced the MTR-3B and added a few extra features that many of us had been asking for including:

  • Easy access to sidetone volume control (with a dielectric screwdriver)
  • A built-in SWR meter
  • A wider voltage range and higher output power (up to 5 watts)
  • And the 80 meter band in addition to 40, 30, and 20 meters

The MTR-4B also has an attractive red gloss chassis.

And the right and left sides of the chassis even protrude a bit to better protect the front panel buttons and switches when the unit is flipped over on its face. Nice touch!

Generosity

One of the great things about being me is I am often at the receiving end of incredibly generous people who like supporting what I do.

QRPer.com is a pure labor of love and I’d do what I do without any compensation, but it’s an honor when anyone goes out of their way to thank or support me.

Seriously: the kindness I feel here restores my faith in humanity.

In January, a reader (who wishes to remain anonymous) approached me with a deal I simply couldn’t refuse. He is a very seasoned and accomplished field operator but has only recently been upping his CW game. I believe as a reward to himself for starting CW activations later this year, he told me he wished to order a new MTR-4B.

What he proposed was to purchase the radio from LnR and have it drop-shipped to me. He wanted me to have the opportunity to review this little radio and log field time with it as well. He told me I could use it for months before shipping it to him and not to worry about it getting scratched or showing other signs of field use.

Wow.

I loved this idea because, as a reviewer, it isn’t financially viable to buy each and every radio I would like to review. I do like asking manufacturers for loaner radios, but LnR is a small manufacturer and make these units to order. I know them quite well and they simply don’t have extra loaner units lying around the shop–much like new automobiles these day, each one produced is already spoken for.

I accepted his offer with gratitude. I looked forward to getting my hands on the MTR-4B!

But that wasn’t all: this kind reader has actually been sending me coffee fund contributions that will add up to half the price of a new MTR-4B should I decide to purchase and add one to my own field radio arsenal! I tried, but I couldn’t talk him out of it.

So there you go. I’m so incredibly grateful.

Delivery

As LnR Precision states on their website, there’s roughly a 6-8 week lead time on the MTR-4B. I took delivery of this unit in early March.

As with all LnR Precision products, it was packed amazingly well.

I wasn’t sure what to expect in terms of size, but the MTR-3B is only slightly bulkier than the MTR-3B (indeed, in my activation video below, I compare the two).

I love the hotrod red paint job!

This unit arrived during what turned out to be a crazy time for me–one where there was nearly a four week period with no field activations. That’s how crazy!

I did play with the MTR-4B in the shack, however, during that time and logged numerous POTA, WWFF, and SOTA activators. I even had a couple of 80 meter rag chews.

Many field ops were surprised that the MTR-4B didn’t use the forth band position for 17 or 15 meters and I tend to agree. In the field, efficient 80 meter antennas are a bit bulky for the likes of a summit activator. Then again, when in the shack or for extended camping trips? I find 80 meters a brilliant band for evening rag chews and late night DXing.

Not sure how much I’ll use 80M in the field, but I do appreciate this additional band!

Of course, the MTR-4B is built for playing radio outdoors and that’s exactly what I had in store for it on April 13, 2022. Continue reading My first POTA activation with the Mountain Topper MTR-4B V2 →

Field Reports, Guest Posts, Hams, How To, News, Portable, POTA, QRP, SSB, Videos

Brooks’ first Parks On The Air (POTA) activation

13 Comments

A few weeks ago, I received an email from Brooks (KO4QCC), a newly-minted  ham radio operator who asked to tag along on one of my POTA field activations. 

Brooks, it turns out, lives within spitting distance of a number of parks I regularly activate here in western North Carolina. He mentioned he was interested in observing an activation to learn a bit about deploying a field radio kit and, of course, to learn what it’s like to be on the air.

Brooks was also plotting the purchase of his first field radio kit and was very interested in the Icom IC-705 and MFJ-1988LP End-Fed Half-Wave (EFHW) antenna. 

Of course, I welcomed him to join me but since we both have busy family lives–and my schedule especially took some twists and turns in March–it took a few weeks before our schedules aligned.

I asked Brooks if he would consider actually doing the activation himself instead of simply observing or tag-teaming it.  I’m a big believer in hands-on radio time.

Brooks loved the idea!

On Sunday, March 27, 2022, a window of opportunity opened in our schedules and we agreed to meet at Tuttle Educational State Forest (K-4861). I packed my:

As I’ve mentioned before, I’m not really a “YouTuber” so I’m not actually inclined to capture every moment on video, but it struck me that others may appreciate experiencing (vicariously) what it’s like to do a park activation for the first time.

Prior to meeting, I asked Brooks if it would be okay if I made a video of his activation adding that there was absolutely no pressure to do so–just a thought. I’ll be the first to admit that if I were in his shoes, I’m not sure if I’d want a camera capturing my first activation jitters for all to see. 

Brooks loved the idea–as he, too, saw value in this sort of video–so I brought my camera along for the ride.

In the same spirit, I asked Brooks if he would write up the field report and he wholeheartedly agreed, so I’ll turn it over to him now: Continue reading Brooks’ first Parks On The Air (POTA) activation →