Tag Archives: POTA

A YL + KX2 = QRP POTA Fun!

A YL + KX2 = QRP POTA Fun

by Teri (KO4WFP)

Last year, I read about Thomas K4SWL’s trip to Canada and plan to activate while there and thought to myself, “Wow! Wouldn’t it be cool to do that one day?” Well, it so happens that my family decided our 2023 summer trip will be to Nova Scotia and immediately I began thinking of how I could work POTA activations into the trip.

Due to time limitations, we are opting to fly which means my Yaesu FT-891 will not work. As much as I have come to enjoy using this radio, it is too bulky and heavy for airplane travel. So I started looking into QRP setups.

I chose the Elecraft KX2 and AX1. Whenever I mentioned to someone I had ordered the KX2, the immediate response was “You’ll love it!” I wasn’t sure it would arrive before the trip, though, given Elecraft’s order fulfillment estimation of 12 to 16 weeks. (Yikes!) Thankfully, the rig and antenna arrived early May giving me six weeks to familiarize myself with the rig and antenna before my summer trip.

So this past Wednesday May 17th, the KX2 and I headed to Wormsloe State Historic Site (K-3725) for my first POTA QRP activation. Quirky note: I’ve actually named the KX2 “Craig”. I figure it and I will be spending lots of time with each other so we might as well be on a first-name basis! Continue reading A YL + KX2 = QRP POTA Fun!

Pit Stop Style Activation with Elecraft KX3 and AX1

(As is my usual, this article has a bunch of links – click on as many as you wish to receive the full experience)

by Vince (VE6LK)

In May of 2023 I embarked on a two week vacation to Hamilton Ontario, the city of Waterfalls. And I found myself with a spare 30 minutes so I decided to squeeze in an activation.

And as I am an opportunist, I made this decision at 23:25’ish z and I had not yet arrived at the park but the target was only a few minutes away! I would have until 23:59:59z to complete it if I were to be successful. “It’s time to break out the Elecraft AX1 antenna I bought at Hamvention last week I think to myself. It would be my first time using the antenna. I had pre-read the instructions and knew what had to be done in order to set it up.

The whole thing would unfold like a Formula 1 pit stop, albeit a wee bit slower <grin>.

Battlefield House

I arrived at VE-5351, The Battle of Stoney Creek National Historic Site and began to scout a location. Pausing only long enough to snap a few photos, I parked and immediately got to work. Continue reading Pit Stop Style Activation with Elecraft KX3 and AX1

Rainy Day POTA: Setting up the Chelegance MC-750 Vertical Antenna Inside a Picnic Shelter?

On Thursday, April 27, 2023, it was pouring rain, so the perfect time for a little POTA, right–?

Right!

Actually, I had an idea: in the past, I’ve been known to play POTA under the roof of a picnic shelter on rainy days. I’ve even been known to use my AX1 antenna inside the shelter, under a metal roof. Quite a few times, actually.

Of course, it’s not optimal to operate with your antenna under a metal roof, but with POTA? Let’s just say that you can get away with a lot of less-than-optimal antenna deployments.

That’s the benefit of being the DX!

The MC-750 Tripod

An in-the-shelter activation was also the perfect opportunity to test the new Chelegance tripod that fits both the MC-750 and the JPC-12.

A number of readers have reached out asking about this tripod, so when Jesse at Chelegance asked if I’d like to test it, I agreed to do so.

To be clear, he sent this to me at no cost for evaluation. It’s actually quite affordable ($30 on the Chelegance website, $40 at DX Engineering, for example) so purchasing it would have been easy enough, but Jesse also wanted me to evaluate their new FT-818 ATU, so he sent both at the same time (you’ll see the ATU in a future field report).

The tripod feels very sturdy and is simple to deploy. It’s also a little heavy, so keep that in mind if you plan to pack it in for a long SOTA hike.

A number of you have purchased this tripod and have only had positive comments. I now see why.

I speak about this in more detail in the activation video below.

Lake Norman State Park (K-2740)

I decided that it had been too long since I had activated Lake Norman State Park, so I hopped in the car and headed to Troutman, NC! Lake Norman has a number of picnic shelters and covered areas thus a very safe bet.

It was a rainy day so, of course, I pulled into the Lake Norman picnic area only to find one other car there. In fact, by the time I had taken my backpack to the picnic shelter, that other park visitor appeared at a trailhead, hopped in her car, and left.

The picnic shelter sign wasn’t set to “reserved” either, so it looked like I had a green light to claim it for POTA! Continue reading Rainy Day POTA: Setting up the Chelegance MC-750 Vertical Antenna Inside a Picnic Shelter?

Postcard Field Report: Pairing the Elecraft KX2 and MM0OPX EFHW to face dubious propagation

Welcome to another Postcard Field Report!

I’m still in Dayton after Hamvention weekend, but didn’t want to skip my field report and activation video, so a hope you enjoy the slightly shorter report below:

Zebulon Vance Historic Birthplace (K-6856)

On Tuesday, April 25, 2023, I once again stopped by my weekly POTA spot, the Vance Birthplace.  By mid-May, I will no longer be passing by this excellent little POTA site on a weekly basis, so my activations here will be much less frequent. A shame because I do love this site and its staff!

For this particular activation, I’d planned to test my almost perfectly trimmed QRPguys Tunable EFHW antenna, but I left it at home. Not a problem, actually, because after this activation, I discovered it’s not as resonant as I’d like on the 20, 15, and 10 meter bands, so I may tinker with the toroid windings a bit–perhaps removing one.

Instead, I deployed my MM0OPX EFHW which I thought was actually a great choice considering propagation had been incredibly unstable the previous few days.

Since I also had my Elecraft KX2, I knew I could use its built-in ATU to move to non-resonant bands like 17 and 30 meters.

This activation video is a long one because I had quite a lot of time to play radio and, frankly, it was nice taking things at a casual pace.

After deploying the antenna (twice!) I set up the radio, connected my Begali Traveler, and hopped on the air! Continue reading Postcard Field Report: Pairing the Elecraft KX2 and MM0OPX EFHW to face dubious propagation

Lakefront QRP and Bags Galore!

by Vince (VE6LK)

(As is my usual, this article is full of hyperlinks – click on as many as you wish)

The days leading up to my first Hamvention trip were a bit scattered to say the least. While I was pretty sure I remembered everything and even documented most of my gear on Twitter, I would only discover that the bag I intended to carry my gear around in was too small once I arrived in VE3-land. The very next morning I was shopping in several big box stores trying to find the perfect bag only, hours later, to discover an Army Surplus Store across the street from my activation and after the activation concluded.

Holey Moley lookit all the molle and backpacks!
Thomas’ reaction upon seeing this photo was predictable 😉

Anyways, the short summary on the shopping trip was that I figured out a way to get me through the trip without spending a fortune.

The day’s goals were to make a simple activation at a park near the family where we were visiting east of Toronto. Before travelling I scoped out POTA entities that were nearby and had not yet received a CW Activation thus putting me closer to my CW goal for the year.

I landed up at Lakefront West Park VE-1480 in Oshawa Ontario.  A recreational trail winds along the waterfront of Lake Ontario about 100m away, and eight baseball diamonds are the central feature here. Given the lack of trees at the park, and that I do not have a small mast on this trip for my EFHW -although I may remedy that at Hamvention- I chose to deploy my Comet HFJ-350M with some simple ground radials. With the solar reports showing SFI 149, SSN 134, A 19 and K 2, I chose 20m as the band for the day. 5W on my KX3 into a ground mounted vertical with one each 66′ and 33′ radial wires would have to be enough.

DX Toolbox on iOS – click for App Store link

I have the full Comet HFJ-350M kit including the bag to carry all the pieces in. I also have a ground stake from eBay that comes with a 90 degree SO-239 adapter allowing me to attach feedline on the side and the antenna on the top. Not including the ground radials, the whole kit rolls up reasonably small, about 3″ in diameter and 12″ long. Continue reading Lakefront QRP and Bags Galore!

Postcard Field Report: Pairing the Elecraft KX2 and Packtenna 9:1 Random Wire at Holmes Educational State Forest

Well, I’m off to Hamvention in two days and trying to prepare for the trip. There’s so much to do!

If you are attending Hamvention this year, I’d love to meet you. Stop by the Ham Radio Workbench/Halibut Electronics table (#3011) and introduce yourself.

Since my travels this week are imposing on my field report time, I’m going to share another, shorter, Postcard Field Report. I hope you enjoy it:

Holmes Educational State Forest (K-4856)

On Friday, April 21, 2023, I had a short window of time to fit in an activation while my daughter was attending her high school robotics class.

Her robotics class lasts nearly two hours, but it’s 30 minutes away from all parks and summits, so traveling to/from a site takes about one hour.

I didn’t care because I had a particular park in mind: Holmes Educational State Forest (K-4856).

It had been one year almost to the day since I last activated Holmes.

I arrived on site around 13:30 local, and there were only a few other people floating about.

I walked up the main loop path in search of a good picnic table that was out of the way and with ample trees about.

In a pinch, any of the picnic table sites would have sufficed, but since I practically had the whole park to myself, I could afford to be picky!

The sign above reminds me that Educational State Forests in North Carolina have hours that vary by season and truly cater to school groups, thus are primarily open during the school day. Always check those hours before embarking on a journey to this type of park.

One great thing about our Educational State Forests is that they almost always have a nice covered picnic shelter for school groups. If they’re not occupied, they’re perfect for POTA activators who’d like to escape heavy rains. You can see the one at Holmes off in the distance in this photo:

I ended up choosing the same picnic table I used last time–it had more room around it to set up an antenna without crossing the path.

I didn’t have a lot of time to set up and operate, so I chose to use one of my speedier deployment combos: the Elecraft KX2 and PackTenna 9:1 Random Wire. Continue reading Postcard Field Report: Pairing the Elecraft KX2 and Packtenna 9:1 Random Wire at Holmes Educational State Forest

Postcard Field Report: Pairing my new-to-me Palm Pico with the TX-500 at K-6856!

I finally snagged one.

In the world of lightweight, super-compact QRP radio kits, there is one key that is, essentially, a legend: the venerable Palm Pico.

The Palm Pico has a stellar reputation because it’s super lightweight, can retract into its housing to protect it in transport, and can be directly attached to various radios with a specific mounting assembly or via Velcro or magnets.

The Palm Pico has been out of production for some time now and, they’re so highly desired, they often fetch the original purchase price or even higher on the used market. Truth is, so few Pico owners are willing to sell that very few of these keys ever enter the used market.

I was very lucky, indeed, when a long-time Patreon supporter reached out and offered to sell me her Palm Pico and Palm Mini paddles along with a KX2 mounting assembly. She had noticed how my eyes lit up when Josh (KI6NAZ) showed me his Palm Pico paddle on an HRCC Livestream in February.

The price she offered was amazingly low. She told me that she favored some of the other keys in her collection and wanted to give me the opportunity to own them. They were like-new with all original boxes and accessories.

How could I resist? I’m so grateful.

I really look forward to using the Palm Pico and Palm Mini this year. I’m especially eager to hook up the Palm Pico directly to the KX2 with its custom mounting bracket.

I decided to take my Palm Pico on a maiden POTA activation at the Vance Birthplace on April 18, 2023.

Postcard Field Report

I’ve got a load of videos in the pipeline and to keep from falling behind publishing them, you’re going to see more of my slightly shorter “Postcard Field Reports” for the next couple of weeks during my travels.

These postcard reports contain all of the core information, just less wordy.  (In theory!)

Zebulon Vance Historic Birthplace (K-6856)

I arrived at the Vance Birthplace and checked in quickly with the park staff. There were no picnic shelter reservations that day but there was a family with children eating a picnic lunch when I arrived. Continue reading Postcard Field Report: Pairing my new-to-me Palm Pico with the TX-500 at K-6856!

A Triple activation and why I switched from a KX3 to Icom’s IC-705

by Thomas (DM1TBE)

Intro

The last weekend was pretty nice and just like an invitation to operate outdoors. As I wrote in one of my previous posts, I often activate summits on the Swabian Alp, a high plateau, which falls with steep cliff-like edges and many SOTA summits to the northwest. If you approach it from the foothills where I live, the sharp edge is clearly visible.

On the way to the ascent, you came along old, picturesque villages. If you look closely, you can see the “Maibaum”.

The tradition of erecting a “Maibaum” (Maypole) is a long-standing custom in Germany, particularly in the southern regions. The Maibaum is a tall wooden pole that is decorated with colorful ribbons, wreaths, and symbols of the local community. It is usually erected on May Day or the night before and is a symbol of spring, fertility, and community spirit. In some regions, it is also accompanied by folk dances, music, and festivities.

It was my third activation of the summit Römerstein, and every time I used another transceiver.

My transceiver history

When I started with ham radio, I used an old Icom IC-706.

The lack of modern features such as DSP and filters, and the current consumption made it not the first choice for portable operators. I soon switched to an Icom IC-7300 at home and got used to a waterfall and spectrum display.  After two activations with the 706 I bought a Xiegu G90.

During the time of my first activation of the Römerstein, I operated only in SSB. So, I was happy with the G90. The display was small, but way better than my old 706. I was satisfied and used the G90 until I started with CW. In CW, I prefer using headphones until today. The sound of the G90 was uncomfortable for me. The lowest volume was too loud, a lot of loud cracks annoyed me, and I was never happy with the filters. Continue reading A Triple activation and why I switched from a KX3 to Icom’s IC-705

Picnic Blanket POTA on a beautiful spring day at South Mountains State Park

Monday, April 10, 2023, was a spectacular day weather-wise. Spring was out in all its glory making it impossible to stay indoors.

That day, I was driving back to the QTH and made a little detour to the Clear Creek Access of South Mountains State Park.

According to my calculations, I had about one hour to play radio. I did have a firm deadline to hop off the air because I needed to take my daughter to a tennis lesson that afternoon. Couldn’t be late to that!

South Mountains State Park (K-2753)

As I pulled into the Clear Creek Access parking area, I noticed a family of five grabbing picnic supplies from their car.

For the first time ever, there was going to be competition for the one single picnic table at the Clear Creek access!

Actually, there would be no competition at all because there was no way in the world I’d ever take over the picnic table when a family could use it. 🙂

They had a much better reason to use a picnic table than me. Frankly, I was super pleased to see someone else besides a POTA activator using that table. I get a real thrill out of seeing families enjoying our public lands.

Plus, I don’t need a table to play POTA so it was a brilliant excuse to pull the picnic blanket out of the car and set up under a beautiful antenna support…I mean, tree.

For this activation, I decided to use my Penntek TR-45L and, for an antenna, two 28 foot lengths of wire.

Continue reading Picnic Blanket POTA on a beautiful spring day at South Mountains State Park

Getting To France With Detours: A SOTA/POTA/WWFF Triple Activation

by Thomas (DM1TBE)

As I have written in my activation report for Klínovec, a summit in the Czech Republic, I am trying to activate places outside my home region DM, Germany – Low Mountains in SOTA or DA in POTA. With the May 1st being a public holiday, the long weekend provided a perfect opportunity for an activation a bit further away.

After a while looking around, I chose Brissetish Kopf (FL/VO-126) in France. The summit was close to the German border, hasn’t received much love with only 8 SOTA activations and was also a POTA spot for F-1697 Vosges du Nord Regional Park and WWFF Parc Regional des Vosges du Nord, FFF-0035. That promised enough QSOs for me and provided chances for chasers.

The small cluster to which the arrow points are the Vosges, actually the northern Vosges (Vosges du Nord). The cluster south of it are the higher part of the Vosges. The Vosges are a range of low mountains in Eastern France, which continues as Palatinate Forest on the German side of the border, with the highest summit being 1,424 m / 4,672 ft.

I started my journey quite early, leaving around 8am. During the drive I could not help but had to tease Thomas (K4SWL), who spent quite some time in France and, as far as I know, enjoyed it.

The French region Alsace, through which I had to drive to the Vosges, is quite interesting. The region was disputed over several hundred years between Germany and France and changed back and forth between the two. Many place names are still German, or sometimes a mix of French and German. After the World War II, the region returned to France – hopefully the last change.

I used Google Maps to drive to a parking place close to the summit, but my first attempt ended here:

Not sure why Google meant to show me this – thanks for the 30 minutes detour.

Roughly a half hour later, I arrived at Climbach, the small village next to the summit. Based on findings, the area is populated since the Middle Stone Age, that ranged from 280,000 to 25,000 years ago.

Continue reading Getting To France With Detours: A SOTA/POTA/WWFF Triple Activation