Tag Archives: Parks On The Air (POTA)

Field Reports, FT8, Guest Posts, Hams, Morse Code, News, POTA, QRO, QRP, SSB

Guest Field Report: K3FAZ, K3STL, and K3ES POTA in the Cold with a Bonus Gear Report

7 Comments

Many thanks to Brian (K3ES) who shares the following field report:

K3FAZ, K3STL, and K3ES POTA in the Cold with a Bonus Gear Report

K3STL and K3ES at the entrance to K-0621.

by Brian (K3ES)

K3ES Perspective

Saturday November 19 dawned clear and cold in northwest Pennsylvania, but the truth is that I was up well before dawn.  The third Saturday of each month, I try to make the 2 hour drive south to help with Skyview Radio Society’s monthly Volunteer Examiner (VE) testing session for new or upgrading licensees.  Clear skies (which matched the forecast) meant that road conditions would not be a problem.  So, shortly after 5 am I pointed the truck south.

One of the creature comforts I appreciate about our VE session is meeting for breakfast before the test.  It was obvious on arrival at the restaurant that the VEs would greatly outnumber the test candidates, but many hands make light work.  Coffee and an omelet definitely helped fuel the effort.  Since the test sessions normally last less than 2 hours (and that held true this time), three of us VEs had made plans for post-test session POTA.

Before launching into the field report, let me acknowledge that K3STL’s photography was instrumental in providing a report with visual appeal.  Personally, I almost always forget to take the pictures.

POTA Plan

John “Tall Guy” K3STL, Steve K3FAZ, and Brian K3ES in the parking lot at K-0621.

The plan for the day was to attempt activation of two POTA sites, Beechwood Farms State Conservation Area (K-0620) in suburban Pittsburgh, and Todd Sanctuary State Conservation Area (K-0621) about 20 miles further to the northeast.  John “Tall Guy” – K3STL and Brian – K3ES would do a short activation of K-0620, then meet Steve – K3FAZ at K-0621 for the rest of the afternoon.

Knowing it would be a cold day for mid-November (temperatures peaked for the day just barely above freezing), each of us made plans to adjust for operating from our vehicles. That meant that we would be doing parking lot activations at both locations. While we each normally activate with slightly different operating styles that are suited to outdoor POTA operations, some tweaks made it possible to have wind and weather protection for this outing.  In hindsight, it was a perfect choice.

Operating Methods

K3FAZ works an SSB contact.

K3FAZ operated his treasured Kenwood TS-50 using SSB mode with an EFHW antenna in a tree.  Rather than setting up with a table and chair, Steve configured his station to fit in the front seat of his SUV. Continue reading Guest Field Report: K3FAZ, K3STL, and K3ES POTA in the Cold with a Bonus Gear Report →

Field Reports, Morse Code, News, Portable, POTA, QRP, Videos

Quickie Field Report: Pileups at Desoto Falls with the Penntek TR-45L and two 28 foot wires

12 Comments

I mentioned in a previous post that I’m quite behind publishing activation videos. Much of this has to do with the fact that I’ve been a pretty busy activator (by my standards) the past couple of months.

While I don’t make field reports and videos for each of my activations, I usually do one or two per week. Two is typically the max I can post because my field reports take 3-4 hours each to write-up and publish; it can be difficult carving that kind of time out of my busy schedule!

In order to catch-up, I’ve decided to post shorter format field reports from time-to-time; especially for reports like this one where I give quite a lot of info and detail in my activation video.

Desoto Falls National Recreation Area (K-7473)

In the previous field report (from October 14, 2022), I recounted two amazing SOTA activations in north Georgia (Big Cedar and Black Mountain) with my buddy Joshua (KO4AWH) during the annual W4 SOTA Fall Campout.

Immediately after wrapping up our SOTA activations on Black Mountain, we decided to hit a park on the way back to the campground. Desoto Falls National Recreation Area made for a short detour and a nice way to relax after a few miles of hiking that day.

We pulled into the parking area of Desoto Falls and set up our stations in the picnic area placing some distance from one another to help with any interference.

I pulled out my trusty Penntek TR-45L and two 28’/8.5m lengths of 24 gauge wire.  I extended the radiator vertically and unrolled the counterpoise on the ground. The wires were connected to the binding posts on the back of the TR-45L (red=radiator, black=counterpoise). I used the built-in manual Z-Match tuner to match the impedance in short order.

Continue reading Quickie Field Report: Pileups at Desoto Falls with the Penntek TR-45L and two 28 foot wires →

Field Reports, Morse Code, News, Portable, POTA, QRP, SOTA, Videos

Field Report: QRP SOTA and POTA on Big Cedar and Black Mountain in North Georgia

5 Comments

As I mentioned in a previous post, I attended the W4G SOTA Fall Campout in October and it was nothing short of amazing.

It was so great to spend an extended weekend camping, hiking, and hopping on the air with other SOTA activators.

I especially enjoyed getting to know Joshua (KO4AWH)–the fellow behind Tufteln products— over that weekend. He needed a campsite and since my buddy Monty had to pull out of the trip due family activities, I was happy to share the tent site with him.  It actually worked out quite well since we could then pair up and car pool to our SOTA and POTA activations.

What follows is a field report for two SOTA activations Joshua and I did back-to-back on Friday, October 14, 2022.

The trail head for both of these summits was only a few miles from our campsite at Lake Winfield Scott.

Gear:

Note that I used the same gear during both SOTA activations all packed in my Spec-Ops Brand SOTA backpack.

Black Mountain and Big Cedar essentially share the same trailhead at the Woody Gap Recreational Area parking lot on Highway 60.

We were on site early enough to grab a parking space. Keep in mind that it was Friday during leaf season, so there were quite a few hikers on the trails that day! In fact, by midday, the parking lot was overflowing with cars.

Almost by flip of coin, we decided to hit Big Cedar Mountain first. Turns out, Joshua had actually hiked to this summit in the past and even met a SOTA activator en route (and I believe this might have been his inspiration to try Summits On The Air!).

Big Cedar Mountain (W4G/NG-023)

The 1.1 mile hike to the summit of Big Cedar Mountain was brilliant and the views were absolutely stunning. Continue reading Field Report: QRP SOTA and POTA on Big Cedar and Black Mountain in North Georgia →

Field Reports, Morse Code, News, QRP, SSB

Spring Flashback: Pairing the Elecraft KX2 and Chameleon MPAS Lite at New River State Park

6 Comments

This year, it’s been a challenge for me to keep up with field reports that accompany my activation videos.  It’s been a very busy year with a fair amount of travel, DIY projects, and family activities.

I recently realized that I have a number of activation videos from much earlier this year–videos I skipped over in order to post some of my Canadian field reports while I was still in Canada (at one point, I was over 2 months behind posting field reports and activation videos!).

I’ve often said that even if only a handful of people enjoyed my reports and activation videos, I’d still post them. I feel like they could even play a small part in someone’s path to doing field radio or learning CW, it’s wort it.

Plus, I occasionally like looking back at them myself.

In a sense, these reports are my travelogues and they bring back memories of some beautiful spots where I’ve played radio, gone camping, and enjoyed time with my family.

So why don’t you join me as we travel back a few months to…

Springtime

Photo by K4TLI

In late April 2022, I took my family on a camping trip to New River State Park here in North Carolina. You might remember this post and a couple field reports from that trip.

In short, it was an amazing trip and I got to play radio quite a bit!

Each day, I played radio from the morning into the evening. The camp site was actually ideal for playing radio. Until…

Saturday morning (April 30) I woke up, made some coffee at the picnic table, then fired up my radio. It was then I learned that one of the new RVs that joined the campground Friday evening brought some sort of RFI-spewing device with them.

I’ve no clue what it was. If I were to venture a guess, I’d say it was likely something used in electronic warfare. It was intense.

At the campsite that morning, I couldn’t copy a single signal that wasn’t S9+ on my meter. The noise level was S8 or S9.

I decided that I’d need to move to a different part of the park to play radio after breakfast and our family’s morning hike.

Fortunately, there was a large picnic shelter within a short drive of our campsite.

I had the whole place to myself! Continue reading Spring Flashback: Pairing the Elecraft KX2 and Chameleon MPAS Lite at New River State Park →

Field Reports, Guest Posts, Morse Code, News, POTA

Vince’s chilly #POTAThon1111 run on Remembrance/Veterans Day 2022

12 Comments

Many thanks to Vince (VE6LK) who shares the following guest post and field report from Alberta, Canada:

#POTAThon1111 – report from the field

by Vince (VE6LK)

My goal is to activate all of the parks I can that have never been activated.

I’m blessed to live in such a beautiful part of the world and see these parks up close. One wall in my shack has a map of all the un-activated parks and routes within a day’s drive of me, and most are already planned with routes. There will be more #POTAThons!

[Click all images to enlarge.]

#POTAThon is what I call it when I plan on getting to more than one park in a day. Usually these things aren’t thought of for weeks in advance, they are more like a “tomorrow morning” kind of thing. Opportunistic, if you will.

But first, a note about the day I chose…

November 11 is called different things in different countries, but what we share in common is we honour our Veterans and we give thanks for the freedoms they fought for. So today I paused to give thanks and think of the lives they gave so that I have the freedoms I do today. I would bundle up that giving of thanks into an urgently needed day away from the office.

And with that, #POTAThon1111 was born.

#POTAThon is what I tag these activities on my Twitter feed and the month and day denote when it happened. By definition a #POTAThon is more than one activation in a day; I’m simple like that. #POTAThon1111 is the third such event.

The first was #POTAThon0930, an ambitious day attempting 8 sites with two operators and most of them in backcountry outside of cellular range. You can see the video from that day when you click on this link. We didn’t get to all 8 but we had a hoot trying.

Just before I departed for #POTAThon0930, Thomas Witherspoon K4SWL (you know him, right?) said words to me I’ll never forget: “Vince, just work CW at a speed where you are comfortable, people will adjust. If you work the sacred language, I will find you.”

With those words of encouragement, I gave it a go. On that day I worked CW and a bit of SSB, but since then it’s been all CW for POTA. While the propagation wasn’t with Thomas and I on 0930, we did connect some weeks later – KX3 to KX3 no less.

You need to understand that I think I’m terrible at CW, but I also need to let you in on a secret: there’s no such thing as a Bad CW Contact. I explain that concept in more detail on YouTube, and the essence is: just do it and roll with it, warts and all. People adjust their ways and usually their speed. Go out and have fun trying. Continue reading Vince’s chilly #POTAThon1111 run on Remembrance/Veterans Day 2022 →

Field Reports, How To, Morse Code, News, Portable, POTA, QRP, Skills, Videos

Field Report: How I evaluate a new POTA site plus serious QRP fun with my new-to-me Elecraft KX1

3 Comments

On Friday, October 7, 2022, I had a couple of errands to run in/around Morganton, NC. Of course, I always have POTA in mind so squeezed in an activation at nearby Tuttle Educational State Forest that morning.  That activation took longer than expected due to swapping out antennas and radios, but it was a success and quite fun.

After Tuttle, I knew I could fit in one more activation if I made it quick, so I set my sights on Table Rock Fish Hatchery (K-8012), but first I had a couple of errands to run in Morganton!

I visited my friend Hamilton at his ceramics studio, popped by another store to pick up a couple of items, then (on Hamilton’s advice) grabbed lunch at the The Grind Café.

I must say that Hamilton was spot-on. My wrap was delicious!

Just what I needed to fuel another POTA activation, right? Right!

After lunch, I drove to Table Rock Fish Hatchery. The weather was ideal and the leaves were beginning to show color.

At our home in the mountains, we were almost at peak leaf color, but the fish hatchery site is much lower in elevation. The weather was simply ideal.

On days like this, driving to a site is half the fun. Continue reading Field Report: How I evaluate a new POTA site plus serious QRP fun with my new-to-me Elecraft KX1 →

Field Reports, Morse Code, News, Portable, POTA, QRP, QRP Radios

QRP DX: A quick POTA break with the Penntek TR-45L on the Blue Ridge Parkway

12 Comments

As I’ve mentioned in the past, I feel pretty lucky to live in an area that is  flush with POTA sites.  It’s not that we have numerous individual parks, but the parks we do have encompass massive portions of the area.

One park, in particular, that literally runs around and through Asheville, NC, is the Blue Ridge Parkway. When I’m in town and have a few free minutes, it’s quite easy to hit the BRP; it’s never far away.  I can set up along the parkway pretty much anywhere, or go to the Visitor’s Center or Folk Art Center if I want to operate from a picnic table. In addition, the Mountains To Sea Trail runs along large portions of the parkway, so it’s very easy to hit it as well.

On Wednesday, September 28, 2022, I took my daughters to a class and had the better part of an hour to play radio. The BRP’s Folk Art Center was only a 10 minute drive from their class, so I made a beeline for the site as soon as I dropped them off.

I had the amazing Penntek TR-45L packed in my car, and decided to pair it with my Tufteln End-Fed Random Wire antenna.

Continue reading QRP DX: A quick POTA break with the Penntek TR-45L on the Blue Ridge Parkway →

Antennas, Guest Posts, Morse Code, News, Portable, QRP

Rich re-activates Santa Fe Prairie State Park with QRM-busting in mind

4 Comments

Many thanks to Rich (KQ9L) for sharing the following field report:


Field Report: Testing a horizontally-polarized antenna at a high QRM POTA site

by Rich (KQ9L)

I wanted to give a quick follow up report from Santa Fe Prairie State Park (K-7839).

As you may recall I wrote up my POTA activation from this park on Oct 23, 2022. I made 15 Q’s that day but deep down felt I could do better. The setting of the park is quite industrial and consequently the man made noise is bad. Reflecting back on this activation, I feel that the limited the number of QSO’s I made that day was due to this QRM.

I resolved to try again but this time my objective was to figure out a solution to mitigate the effects of the QRM on my QSO count. Thinking about the problem, I recalled than manmade noise typically is vertically polarized and therefore for my second attempt, I decided to test this and use a horizontal antenna.

As luck may have it, here in Chicago we continue to experiencing unseasonably warm weather and my work schedule wasn’t too busy on Thursday, November 3, 2022, so it seemed like a great chance to put my theory to the test.

For the antenna, I decided to use one which I have owned for awhile, but have never used. I had purchased a RadioWaves Double bazooka from an online retailer some time back when they were on sale and planned to set up it a flattop dipole.

If you recall from my description of the Santa Fe Prairie State Park, there is a scenic overlook which has a tree mounted pulley system perfectly spaced to mount a 20m dipole. Although this would be the first time I used the system, it turned out to be a well designed and intuitive hoisting solution to use.

The “pulley” is actually an eyelet with paracord running through the eyelet. The paracord is in a continuous loop just like rope on a flag pole. By employing a simple overhand knot I secured the end of the antenna to the paracord and hoisted the antenna up into the tree about 20ft. It literally took a few minutes and I was ready to go.

Antenna was fed with my RG-316 feedline with built in common mode choke. Since a dipole is a balanced antenna system, it really doesn’t need the choke, but it was the coax that I had packed with me and I figured it wouldn’t cause any harm or negatively affect my test. I was QRV by 3:20pm, and anxious to get on the air. Continue reading Rich re-activates Santa Fe Prairie State Park with QRM-busting in mind →

Field Reports, Guest Posts, Hams, Morse Code, News, Portable, POTA, QRP

Jay discovered that his first CW POTA activation wasn’t scary at all!

20 Comments

Many thanks to Jay (W1ASP) who, last week, sent me a note about his first POTA CW activation. I asked if he’d consider writing up a short field report about his experience to share with others and he was happy to do so. Thank you, Jay.

Halloween POTA

by Jay (W1ASP)

Halloween doesn’t have to be scary.

I set out to Bear Brook State Park (K-2643) for my first CW POTA activation.

Bear Brook is relatively close by, its the largest state park in New Hampshire with over 10,000 acres. There’s camping, hiking and biking trails along with an archery course and plenty of swimming and fishing areas.

I didn’t give it much thought about what day it was, just that I had the time to do an activation and it was nice out, what a perfect opportunity to break in the newly assembled kit.

I decided on a spot next to the water and as luck would have it there was a picnic table right there. I took out my gear, set up and proceeded to tune around and listen. The band seemed pretty quiet. I wasn’t sure if I’d get enough QSO’s in to make it an official activation. I decided on 14.038 MHz, I sent QRL? I then held down the memory button, took a deep breath and hit it again to transmit: CQ POTA DE W1ASP

I waited a second or two and used the memory keyer once more, again nothing. I went to the POTA website on my phone and added my activation.

The memory keyer was used for a third time, I noticed a message pop up on my logging app, the Reverse Beacon Network spotted me. It wasn’t too long after, the first call came back to me!

I was nervous and fumbled a bit here and there but once I took my time I was fine, sending their call back and TU UR 599 599 NH BK. I cheated a little and left the CW decoder enabled. I wanted to be sure I had the call correct as I logged my 13 QSO’s. (I swear the 13 wasn’t intentional.) for my first CW park activation! I only realized that it was Halloween while walking back to my truck.

I thought to myself, “that wasn’t scary at all.”

Once I decided that, as an activator I’m in charge of the QSO, I relaxed and it was a lot of fun. I may have made a few mistakes but everyone was patient with me. I later received an email from another Ham in Delaware. He was using the same radio, and referred to them as the perfect “picnic portable radio” we emailed back and forth a few times and I look forward to hearing him on the air again soon.

 

The week before, I finished building my second QCX Mini. The first kit I built was for the 30 meter band around this time last year, this second one is a 20 meter version. I love these little radios, there’s something about these little transceivers that I just can’t seem to put them down.

I took my time making sure it was working properly, I hooked it up in my shack and I had my first QSO with another POTO activator in Maryland just over 400 miles away.  To say I was excited is an understatement!

I planned on putting together a kit about a month ago for POTA and eventually SOTA with the QCX Mini as the radio. I decided on using a small pack, I wanted it to be a self contained kit that had everything I needed to do an activation and nothing extra.

I keep the wire and radios together,  and depending what band I choose to operate on is the one I pack. I’m considering a third kit; maybe a 10m version? I threw the EFHW matching transformer in the bag along with a notebook, mechanical pencil and a battery pack I put together using four 3.2v LifePo batteries. The paddle I’m currently using is a stainless paddle I found on online with a mini CW paddle for backup and set of folding headphones.

I’m looking forward to my next park, this was a great experience. I wanted to learn CW since I became a Ham in 2016, that’s another story of what got me into Ham Radio in the first place.

Field Reports, Morse Code, News, Portable, POTA, QRP

POTA Plan C: Swapping antennas and rigs at Tuttle Educational State Forest

9 Comments

After the success of my previous day’s activation at Fort Dobbs State Historic Site, I decided to take the Icom IC-703 Plus out for yet another activation.

As I mentioned in the previous post, the IC-703 has not gotten a lot of outdoor time this year because I’ve had issues with the electronic keyer locking up when using the radio with end-fed antennas.

Of course, there are a number of ways to mitigate or radiate the RF that could be coming back to the radio, so at Fort Dobbs, the previous day, I used a simple common mode choke. It seemed to do the trick.

I was curious if using a common mode choke might be the only solution needed to solve this problem, or if I’d need to perform a mod to my IC-703.

I was ready to test the IC-703 again.

I had a fair amount of antenna options in the trunk of my car, so on the way to Tuttle Educational State Forest (on Friday, October 7, 2022), I considered a few options to shake things up a bit.

Since I was feeling comfortable that the common mode choke was taking care of things, I decided to push the limit a bit and deploy an end-fed random wire antenna. I didn’t have any of my mini portable 9:1 random wire antennas in the car (PackTenna, Tufteln, etc.), but I did have another solution: the Chameleon MPAS Lite.

The cool thing about the CHA MPAS Lite is that while it’s primarily designed to be a vertical antenna with counterpoise, it can be reconfigured and deployed a number of ways including as a simple end-fed random wire antenna.

After giving it some thought, I decided it might be fun to deploy it as an inverted V random wire. In fact, here’s a diagram from the MPAS Lite manual of exactly what I planned to do.

I’d be using the MPAS Lite counterpoise as the radiator, so I wouldn’t have the optional second counterpoise as seen in the illustration above. That’s okay, though, because I was feeding the antenna with Chameleon’s 50′ RG-58C/U cable with in-line choke; the shield of the coax would act as the antenna counterpoise.

This is the same coax cable I used the previous day. Continue reading POTA Plan C: Swapping antennas and rigs at Tuttle Educational State Forest →