Tag Archives: Elecraft KX2

Field Reports, Morse Code, News, Portable, POTA, QRP

Pairing the Elecraft KX2 with a 28.5′ random wire for a rapid POTA activation

1 Comment

On Wednesday, January 11, 2023, I was on my way back to the QTH after a brief trip to Raleigh, NC.

Later in the afternoon, I needed to take my daughters to a class, thus I had a strict deadline to meet. Still, it was a beautiful day so I decided to pop by Tuttle Educational State Forest for a nice walk and possibly an activation if I time allowed.  I’d spent so much time in my car the previous couple of days, I really wanted to stretch my legs.

Tuttle Educational State Forest (K-4861)

As I drove to Tuttle, I made a decision to film a Hike & Talk session–I had a topic on my mind and thought the timing was right to make a recording. You can check out that (previously published) Hike & Talk session here.

After that casual walk, I found that I had a good 45 minute window–no more–to fit in a full activation including set-up/take-down. Very doable!

The radio I had packed away for this road trip was my Elecraft KX2 field kit which included a Tufteln no-transformer random wire antenna (compact equivalent of my 28.5′ speaker wire antenna) and my AX1 portable antenna. I had this particular kit because I’d hoped to do an urban park activation in Raleigh, but simply didn’t have the time to fit it in.

Setting up the KX2 is a swift process.

I chose a picnic table, deployed the Tufteln antenna and was on the air in no time! Continue reading Pairing the Elecraft KX2 with a 28.5′ random wire for a rapid POTA activation →

Field Reports, Morse Code, News, Portable, POTA, QRP, QRPp, Videos

QRPp: Activate a park with ⅒ of a watt–? I had to at least try!

33 Comments

In my last published field report, you might recall that I successfully activated a park using 500 milliwatts or ½ of a watt. I was so surprised by the results of using this QRPp power level I immediately made plans to push the power level even lower during my next activation.

Let’s face it, I was drunk with a lack of power!

QRPp

After my last field report, there were quite a few questions about the term QRPp and what it means. To be honest, I’m not sure if there’s an “official” definition, but here’s what is widely accepted as QRP power categories:

  • QRP: 5 watts to 1 watt (for some contest 10 watts = SSB QRP)
  • QRPp: Less than 1 watt to 100 mw
  • QRPpp: Less than 100mw

I don’t own a field radio that allows me to lower the output power to QRPpp levels. In fact, few of my radios actually allow me to lower power below one watt.

 

My Elecraft radios, however, do allow me to lower power output to as low as 0.1 watts or 100 milliwatts.

The plan

On Wednesday, December 7, 2022, my travel schedule shifted and it opened up the entire afternoon to play radio.

A rarity indeed!

It was very rainy and foggy that day and I didn’t have my ENO rain fly with me, so I decided to visit a park with a good picnic shelter to keep me, an my gear, nice and dry.

Fort Dobbs State Historic Site (K-6839)

I had four park options with covered picnic shelters within a 45 minute drive. I decided that I would try to activate Fort Dobbs State Historic (since it had been a couple months since I’d visited) and Lake Norman State Park would be my back-up plan.

Fort Dobbs is a small park, so I called in advanced and asked for permission to do the activation and also asked if their picnic shelter was reserved.

The rangers there know me, so the phone call was pretty quick–no need to explain POTA nor my motivations. They told me that on rainy/foggy December days they have so few guests that I was welcome to use the picnic shelter or even the entire park if I wished (perhaps an ideal time to erect a Rhombic antenna–okay, just kidding!).

The Dobbs park rangers an volunteers are the best!

Setting up

On the way to the site, I decided that I would deploy my MM0OPX end-fed half-wave I’d cut for 40 meters.

I needed to make the most of my 100 milliwatts, so I figured the MM0OPX EFHW would be the best antenna for the job. Continue reading QRPp: Activate a park with ⅒ of a watt–? I had to at least try! →

Field Reports, Guest Posts, News, Portable, POTA, QRP, QRPers

Guest Post: Recipe for a Failed Activation in Allegheny National Forest?

13 Comments

Many thanks to Brian (K3ES) who shares the following field report:

Recipe for a Failed Activation at K-0619?

by Brian (K3ES)

A couple of days before Christmas, high winds came, temperatures dropped, and 3 inches of snow made a real nuisance of itself by blowing around and re-covering anything that was swept or shoveled. With daily high temperatures below zero (Fahrenheit) and wind gusts over 40 miles per hour, the weather just didn’t make for much fun outdoors. In fact, we hunkered down and didn’t get beyond the end of the driveway for four days. So when the winds calmed and temperatures rose, I really needed to get out of the house for a bit. What better way than to walk up the road and activate K-0619? Even with temperatures in the low 20s, I should be able to finish a quick activation. And so it was planned…

Of course just before walking out the door, it is always prudent to check on band conditions…

What did the sun just do to me, and how will I ever make 10 contacts on 5 watts before my fingers freeze???

Alright, I really need my outdoor time. Even if it means that I fail to activate the park this time, I’m going for it!!!

I walked down the driveway…

Off to the woods we go…

…up the road…

Fortunately the hike is less than ½ mile…
K-0619, Allegheny National Forest…

… and into the woods.

Snowy, peaceful, and lots of trees to support my antenna.

After getting to my spot, I set up my chair, laid out a trash bag to keep radio gear out of the snow, threw a line over a tree branch (it took two tries), and rigged the antenna. Continue reading Guest Post: Recipe for a Failed Activation in Allegheny National Forest? →

Field Reports, Morse Code, News, Portable, POTA, QRP, QRP Radios, QRPp, Videos

POTA with 500 milliwatts CW and 10 watts SSB using the Elecraft KX2 and PackTenna Random Wire combo

17 Comments

I’d like to start this field report with a side story. I’ll keep this reader anonymous since I haven’t asked for permission to post his story (although I’m certain he wouldn’t mind!):

A QRP Christmas Gift

Yesterday, I was contacted by a reader who had just received an amazing gift.

On Christmas morning, his wife presented him with a tiny wrapped box and inside there was a small note:

“Get yourself a great field radio. You have Carte Blanche!” 

What an amazing gift…right–?! She literally said Carte Blanche!

Evidently, she is familiar with my YouTube channel  (poor thing) because he often watches my activation videos on their living room TV. [Between us, I’m a bit surprised she still loves him after subjecting her to my videos.]

She told him, “Run your choice by Thomas before ordering.”

The funny bit? He approached me with this very question in November as he plotted a 2023 radio purchase. He couldn’t decide between the Icom IC-705 and the Elecraft KX2.

He wrote yesterday to tell me that he placed an order for a new Elecraft KX2 with all the trimmings; Elecraft’s KX2 “Shack-In-A-Box” package plus a set of KXPD2 paddles.

The KX2 is back-ordered due to parts availability, so he won’t receive his unit for several months, most likely.

Based on his operating style, I think he chose wisely. The IC-705 is a benchmark field radio, but he was looking for something that he could pair with a random wire antenna (the ‘705 lacks an internal ATU) and that would be easy to use on SOTA activations. He’s new to CW as well and loved the fact that the KXPD2 paddles attach to the front of the KX2.

Why do I mention this story? Because it’s not only fresh on my mind, but it’s the same radio and antenna I used during an activation on Thursday, December 1, 2022.

Tuttle Educational State Forest (K-4861)

As I pulled into Tuttle’s parking area that day I had a tried-and-true field radio kit pairing in my pack: my Elecraft KX2 and PackTenna 9:1 Random Wire antenna.

As I mention at the start of my activation video (see below), with the Elecraft KX2 and a random wire, I could easily activate all of the summits, parks, and islands I desire. It’s such an effective, flexible, and portable combo.

QRPp

To shake things up, I decided to knock the output power of the KX2 down to one half of one watt–500 milliwatts–at least for the CW portion of my activation.

Why not?

Plus, I don’t think I’ve ever validated a POTA activation with 1/2 of a watt, so it might make for a fun challenge! Continue reading POTA with 500 milliwatts CW and 10 watts SSB using the Elecraft KX2 and PackTenna Random Wire combo →

Field Reports, News, Portable, POTA, QRP, SSB

A QRP SSB POTA activation using only the Elecraft KX2’s internal microphone!

3 Comments

Once I started doing CW POTA activations in 2020, there really was no going back.

It’s hard to explain, but CW makes POTA and SOTA activations so much easier, in my opinion.

I’m sure many who’ve ventured down the path of CW understand.  I know devoted SSB operators who started doing CW in the field and pretty much permanently switched to CW. Indeed, that was me.

That said, I do like SSB as well and it has some positives over CW in terms of POTA.

For one thing, there are so many more SSB hunters out there (compared with CW); even on a slow POTA today, you can still amass large pileups. The cadence of SSB exchanges is also faster than that of POTA CW exchanges (which rarely exceed 20 WPM) so it’s easy to log two or even three times the number of contacts in the same amount of time.

In addition–let’s face it–it’s also fun hearing another operator’s voice on the other end.

Many readers have been asking me to do more SSB activations and I’ve been meaning to. Truth is, though, the majority of my field radios are CW-only, so when I have them in tow, SSB simply isn’t an option.

Tuttle Educational State Forest (K-4861)

On Thursday, November 17, 2022, I stopped by Tuttle Educational State Forest for a short hike and, of course, an activation.

It was during my hike that I came up with the idea to do a five watt SSB activation. I quickly realized, though, that the only radio in my car with SSB capabilities was the Elecraft KX2, but I didn’t have a hand mic or headset packed!

Fortunately, the KX2 has a built-in microphone for SSB. It’s not as ideal as my Elecraft/Heil Pro Set, nor even the basic Elecraft hand mic, but it works, so I thought it might be fun to do an entire SSB activation only using the KX2 internal microphone!

Setting up

There’s not a lot to set up when using a KX2; the radio has an internal battery, internal ATU, and since I was using the internal mic, all I needed was an antenna and some feed line.

I chose the KM4ACK 40 meter end-fed half-wave that I built from a kit many moons ago. I hadn’t deployed this particular antenna in the field in ages–it’s a good one, though! Continue reading A QRP SSB POTA activation using only the Elecraft KX2’s internal microphone! →

Antennas, Field Reports, Morse Code, News, Portable, POTA, QRP

Pairing the Elecraft KX2 and AX1 with a little QRP Coffee for some proper portable POTA fun!

16 Comments

Driving home on Thursday, December 8, 2022, I popped by Food Matters in Morganton, NC and grabbed one of their amazing curried chicken salad wraps.

I sat in the car and listened to a podcast as I ate a late-ish lunch. I looked at my watch and sorted out what time I needed to be back at my home in the mountains. After a little mental math, I realized I had about 90 minutes to fit in a little radio fun.

Where to go on a rainy day?

Tuttle Educational State Forest (K-4861)

Since it was a Thursday and I knew Tuttle would be open, it was really a no-brainer. Tuttle is only an 8 minute drive from the parking lot at Food Matters, so I made my way to Playmore Beach Road!

En route, I made a mental inventory of what radios and antennas I had packed in the car. I knew I had my KX2 and although its internal battery had already powered me through three or four activations already, I knew there’d be enough charge for one or two more.

Also, since it was raining, I thought it would be the perfect day to set up under Tuttle’s excellent picnic shelter.

As for an antenna, I remembered putting the AX1 in my antenna box, so why not pair the two and operate in the dry?

Coffee Time

Funny, but after I started recording the activation video (below), I convinced myself that I needed to make some coffee. I pulled out my field coffee kit and set it up for a quick brew.

The park had completely shut off all water fountains and closed the rest room area, so there was no place to get fresh water. Fortunately, I had *just* enough water left in my water bottle after lunch. Almost the perfect amount for a cup of coffee but no more.

This wasn’t a planned cuppa’ so I used one of my last Starbucks Via coffee packs. Had I planned this in advance, I would have ground some beans at home and made a pour-over coffee.

That’s okay, though. The Starbucks packs are better than no coffee at all.

Field Coffee Kit

If you’re curious about the contents of my field coffee kit, here’s the list:

Continue reading Pairing the Elecraft KX2 and AX1 with a little QRP Coffee for some proper portable POTA fun! →

Accessories, Hacks and Hints, How To

Jim’s Elecraft KX2 leg mount

12 Comments

Many thanks to Jim (WU3K) who writes:

Hi Thomas,

I recently came up with a new way (for me) to hold the KX2 when I am out in the field.

The set-up utilizes the Side KX KX2 mount and the RAM Body Mount for Legs.

This set up does a pretty good job for me.

73,

Jim
WU3K

This is absolutely genius, Jim! Besides the leg mount looking like a excellent solution, the Side KX mount could then be used for other mounting locations either at home or mobile!

Thank you for sharing!

Antennas, Field Reports, Morse Code, News, Portable, POTA, QRP, SOTA

Testing a new Tufteln knee board and antenna during this beautiful SOTA activation on Mount Mitchell

13 Comments

On the morning of November 4th, I woke up with one thought on my mind: “I need to activate Mount Mitchell before it’s too late!”

It’s not like Mount Mitchell was going to disappear, but I knew I was already on borrowed time since the long section of the Blue Ridge Parkway I use to drive to Mount Mitchell from Asheville typically closes in the early part of November for weeks at a time. The park itself will close to guests too–in fact, last year, it closed its gates as I drove out of the park! There are often other roads open to Mitchell in the winter, but they’re very much out of the way for me and frankly, weather can shift and the park close at the drop of a hat.

As the crow flies, Mount Mitchell is actually very close to my QTH. If I wanted, I could hike there directly from my home. I’ve yet to do this, however, because with the 3,000′ elevation change and the anything-but-direct trails that skirt the Asheville watershed, I’d need a full day or more to hike it one way. I will for sure do this sometime, but only when I can pack appropriately and reserve a campsite.

Morning drive

As soon as I surfaced that morning, I check the weather map. I noticed that the temp at Mount Mitchell was actually slightly higher than at my QTH. I looked out the kitchen window and could see fog in the valley. This meant one thing: inversion!

When we have inversion, the cold air is pushed down into the valley and warmer air can be found at higher elevations. The flip opposite of what you’d typically expect.

I ate a quick bite, grabbed come coffee, and hit the road.

As I drove past Warren Wilson College’s farm, it was absolutely gorgeous. I had to stop and take a photo or two [click images to enlarge].

The drive up to Mount Mitchell on the BRP was ideal: clear skies and quite warm!

Mount Mitchell State Park (W4C/CM-001 and K-2747)

In fact, I felt like I really struck it lucky that day. I didn’t even need a heavy jacket or gloves. Continue reading Testing a new Tufteln knee board and antenna during this beautiful SOTA activation on Mount Mitchell →

Guest Posts, Hams, How To, Mobile, News, QRP

Rand’s “Shotgun!” Mobile QRP Station

15 Comments

Many thanks to Rand (W7UDT) who shares the following guest post:

 ‘Shotgun!’ My Mobile QRP Station…

by Rand (W7UDT)

I’ll confess, at our overly stylish home, sadly, I don’t have a shack… my XYL has “concerns.”  So, in an attempt to keep my operating license and man card active, I happily practice portable QRP field operations at my QTH and afield.

This time of year however, with winter bearing down on us, I choose to deploy via my ‘Shotgun!’ mobile QRP station.  Simply, a quarter inch sheet of birch plywood, cut and finished nicely to fit suspended from the grab bar and headrest of my Jeep Wrangler’s passenger seat.  Ergo, ‘Shotgun!’

Grab, hang, stow and go!

It’s not a new idea, but I must say, it has become a very good solution to the chilly problem of posterior frostbite and hypothermia.

I’ll elaborate…

Continue reading Rand’s “Shotgun!” Mobile QRP Station →

Field Reports, Morse Code, News, Portable, POTA, QRP, SOTA, Videos

Field Report: QRP SOTA and POTA on Big Cedar and Black Mountain in North Georgia

5 Comments

As I mentioned in a previous post, I attended the W4G SOTA Fall Campout in October and it was nothing short of amazing.

It was so great to spend an extended weekend camping, hiking, and hopping on the air with other SOTA activators.

I especially enjoyed getting to know Joshua (KO4AWH)–the fellow behind Tufteln products— over that weekend. He needed a campsite and since my buddy Monty had to pull out of the trip due family activities, I was happy to share the tent site with him.  It actually worked out quite well since we could then pair up and car pool to our SOTA and POTA activations.

What follows is a field report for two SOTA activations Joshua and I did back-to-back on Friday, October 14, 2022.

The trail head for both of these summits was only a few miles from our campsite at Lake Winfield Scott.

Gear:

Note that I used the same gear during both SOTA activations all packed in my Spec-Ops Brand SOTA backpack.

Black Mountain and Big Cedar essentially share the same trailhead at the Woody Gap Recreational Area parking lot on Highway 60.

We were on site early enough to grab a parking space. Keep in mind that it was Friday during leaf season, so there were quite a few hikers on the trails that day! In fact, by midday, the parking lot was overflowing with cars.

Almost by flip of coin, we decided to hit Big Cedar Mountain first. Turns out, Joshua had actually hiked to this summit in the past and even met a SOTA activator en route (and I believe this might have been his inspiration to try Summits On The Air!).

Big Cedar Mountain (W4G/NG-023)

The 1.1 mile hike to the summit of Big Cedar Mountain was brilliant and the views were absolutely stunning. Continue reading Field Report: QRP SOTA and POTA on Big Cedar and Black Mountain in North Georgia →