Category Archives: News

Kits, New Products, News, QRP, QRP Radios

Video: QRP Labs QCX-mini 5W CW transceiver–now available to order

Leave a comment

Hans at QRP Labs has just posted a video of the new QCX-Mini 5 watt transceiver kit. It looks like another thoughtful design:

Even though I’ve yet to build my QCX+ (!!!), I just ordered the QCX-Mini. This little kit will be a challenge for me–even though all of the SMD components are pre-populated, it’s still a tight board and requires some fancy toroid work!

Still, I’m buying it to support QRP Labs’ work and because I love the challenge of building kits. This one is awfully cute and I’m pretty sure I’ll use it to claim a summit!

My entire QCX-Mini kit with enclosure set me back $86.99 US with shipping and tax included. How could I resist? (Don’t answer that, please.)

Click here to check out the QCX-Mini product page. 

New Products, News, Reviews

Initial review of the Xiegu GSOC controller

1 Comment

In early November, I took delivery of the new Xiegu GSOC Touch Screen Controller which has kindly been sent to me by Radioddity on loan for a frank evaluation. [Thank you, Radioddity!]

To be clear: the GSOC is not a transceiver, it’s a control head for the Xiegu G90 and (to a limited degree) X5105. Note I recently  reviewed the Xiegu G90.

GSOC development has been closely watched by Xiegu owners since its announcement in the summer of 2020.

Frankly, I didn’t completely see the appeal myself because the price of the GSOC was projected to be around $550–at least $100 more than the retail price of the G90 transceiver it controls.

The G90, in my opinion, is a good value field radio. Not a stellar performer, but it gets the job done and the built-in ATU does a brilliant job finding matches. It’s become a very popular radio for portable field operators because of the price, the versatility, and the power output (up to 20W). It’s not a KX2, KX3, or IC-705, but it certainly provides much more than one would expect from $450.

When you combine the price of the G90 and GSOC, however, you’re pushing $1000 and that’s getting in the range of radios like the Icom IC-7300.

Not feeling the GSOC love

In short, I’ve been quite disappointed with the GSOC. It feels like a product that was rushed to market way too soon. The specs and features don’t match up to what’s been advertised yet.

Yesterday, I posted an updated evaluation of the GSOC on the SWLing Post after performing the first public firmware upgrade. If you’ve been considering the GSOC, I would strongly encourage you to read that full post.

Check out the number of images that temporarily appeared in the spectrum and waterfall.

In a nutshell, there are some major issues with the GSOC at present (December 2, 2020):

  • No documentation or owner’s manual at time of posting other than an incredibly basic quick start guide
  • CW mode is essentially unusable due to latency in the CW sidetone audio
  • Combined current drain of the G90/GSOC pair is about 1 amp. For QRP field ops, that’s a substantial number and one you’d expect from a 100W field radio
  • The spectrum display is inundated with noise and images that are not present in the G90 received audio
  • On my unit, the large encoder sticks a bit and rubs the front panel when in use. I plan to see if I can reseat the encoder knob to help.
  • A keyboard and mouse or capacitive stylus are almost required for accurate operation of the touch screen due to the size of some of the buttons.
  • Click here to view a more comprehensive list…

In summary? I can’t recommend the GSOC yet and that’s why I’m posting this summary here on QRPer–I’d like to dissuade readers from grabbing one of these as a Christmas gift.

The package looks tempting, but there are too many issues that must be addressed just to achieve proper control of the G90.  I can tell that, personally, I won’t purchase the GSOC even when everything is fixed. The price point is just too high, in my opinion, for the functionality it provides. The G90 is a fun, functional little radio, but doesn’t sport the performance and receiver characteristics that I feel warrant a touch screen controller. The controller will only ever be as good as the transceiver to which it’s attached.

Do you own or have you considered purchasing the GSOC? I’d love your comments/thoughts.

News, Portable, QRP

A simple 3D-printed foot for the Icom IC-705

3 Comments

A number of readers have asked about the small foot under my IC-705 in recent POTA field reports.

One of my biggest criticisms of the IC-705 is that it has no built-in foot to tilt the radio for an optimal operating position. On the other hand, it does have a number of attachment points on the bottom including a standard tripod mounting point and several 4mm points.

Shortly after I received my IC-705, I checked Thingiverse knowing a clever ham would have designed some sort of leg or tilt stand.

One of the first designs I found was the most simple: this foot by “Viktor39” that attaches to the bottom of the IC-705.

It prints quickly and uses very little material (no support structure). Mine is made of orange PLA (because that’s what my daughters had been using), but I’m sure ABS would be a better choice.

You’ll need two M4 x 10mm screws to attach the foot to the bottom of the IC-705; mine have hex socket caps.

I’ve found that the foot is small enough that I never need to detach it even in transport.

Click here to view on Thingiverse.

News

BGMicro offers 35% off all orders

Leave a comment

Many thanks to Paul Evans (W4/VP9KF) who writes:

BGMicro, those of the low, low, parts prices and friendly telephone manner, have their best ever sale (you can tell I like them).

Enter code FRIDAY and they’ll take 35% off the whole order. The prices of everything are already crazily low compared to all the normal sources.

Building something? It just got even cheaper 🙂 Shipping is flat rate Priority USPS (and they really will stuff as much as they can into the flat rate box). I can hardly contain my excitement.

Thanks for the tip, Paul!

Click here to browse the BGMicro catalog online.

Homebrew, How To, News, Portable, QRP

Curt builds an Icom IC-705 control interface for his Elecraft T1 ATU

11 Comments

Many thanks to Curt (WU3U) who recently contacted me and mentioned he had built an IC-705 control interface for his Elecraft T1 ATU. This is a homebrew project based on others’ work and uses the FT-817 control port on the side of the T1 tuner.

I asked Curt if he could share a little more about his tuner to post here on QRPer:

Hi Thomas, I can’t take credit for the interface, as a guy in Japan designed it. When I built mine the entire instructions and notes for code for the PIC controller were in Japanese. I used Google translate to translate all of the information and I was able to successfully program the PIC chip and build the circuit. He has since released the details and code in English.

There are two designs: one with an on/off switch, and a newer version without an on/off switch that has auto power save. Both circuits are the same but the software for the PIC chip is different. If you build the one without the on/off switch there is a very specific sequence of connecting and disconnecting the device and it’s my opinion that the one with the on/off switch is the version that makes more sense to build. It shouldn’t matter which order you connect everything up and you simply throw the on/off switch to turn the device on and off.

Building the interface takes an understanding of a fairly simple electronic schematic and acquiring the parts. You also have to have a PIC programmer and the software to write his .hex file into the PIC controller chip.

The parts for the interface are all very common parts. The resistors are standard values. My build cost me about $30 in parts but I had to buy many of them in bulk from Amazon like the enclosures, switches and 3.5mm jacks and circuit boards to name a few. Individually the parts were $30 but my bulk order cost me much more. I also had to buy a PIC programmer for $25 and figure out what software I needed to download to program the PIC chip with the author’s code. It takes an experienced builder about two hours to build the device but it’s not out of the realm of a semi-novice as long as they can get the PIC chip programmed.

Here is the original code using the on/off switch. Everything is now in English:
https://amateur-radio.cocolog-nifty.com/blog/2020/11/post-1eb3cf.html

Here is his newer version with the same circuit design eliminating the on/off switch by using a different PIC program allowing the interface to have auto power shutdown (low power standby) but there is a specific order for connecting and disconnecting the interface. With this version there is still drain on the battery but the designer thinks that drain is less than the normal self discharge of the battery. I feel that any discharge combined with the self discharge of the battery will be more discharge than using the design with the on/off switch.
https://amateur-radio.cocolog-nifty.com/blog/2020/11/post-591d17.html

Video

I think this is a brilliant project and certainly one worth considering for those of us who already own an Elecraft T1 ATU and would like full control from the IC-705.

Thank you for sharing these details, Curt!

 

Hams, News, QRP Radios, SOTA

Steve’s new Icom IC-705 SOTA lap desk

1 Comment

I’ve been in touch with Steve (WG0AT) recently. He happened to be selling his FT-817 at the same time I was looking for a narrow CW filter.  The stars aligned and I now have a 500 Hz Collins CW filter in my FT-817ND.  Thanks, Steve!

Steve also took delivery of his Icom IC-705 recently so we’ve been trading notes about this fine rig. He and I both have a fear of the ‘705 falling off our laps when using it in the field for SOTA and POTA activations.

Steve, being the king of ham radio customization, started working on a portable desk. He shared iterations along the way and his final product seen in the photo above.

The desk is a brilliant design: it’s lightweight, sturdy, has holes for managing wires/cables, a strap to hold it your leg, and even a cup holder. The cup holder is a bit of genius because he likes a good cuppa tea in the field just like I like a good cuppa joe.

The IC-705 will be able to bolt directly to the lap desk so there’ll be no fear of it falling off a cliff in the field.

Of course, the desk will work with any field-portable radio. Steve shared a few more photos:

I’m going to attempt to build a similar desk for my IC-705. The great thing about it is it’ll easily fit in a backpack, too.

Thanks again for letting me share your photos, Steve! We look forward to seeing this desk in action at a summit near you!

Check out Steve’s excellent YouTube channel here.

News

Bioenno Thanksgiving Sale

2 Comments
I typically pair my IC-705 with a 4.5 aH Bioenno LiFEPo battery pack.

Just a heads up that Bioenno Power is having a 2020 Thanksgiving sale and offering a 10% discount with the coupon code “THANKS”.

I’m a huge fan of Bioenno’s batteries and just pulled the trigger on yet another LiFePo battery. This time, a compact 3 aH battery. This will be more than enough battery to play QRP for hours without recharging.

Side note: I’m also working on a project for my parents converting their living room lamp into a DC LED lamp with battery backup. Their power outages seem to be so frequent as of late, I know they’ll appreciate a lamp that will work regardless if the power grid is up or not. I’ve already purchased a 12V LED Edison-style bulb and now will pair it with a 4.5 aH Bioenno battery.

Click here to check out Bioenno’s website.

Antennas, Field Reports, Morse Code, News, POTA, Videos

Impromptu POTA activation using the Elecraft AX1 Antenna

8 Comments

A few weeks ago, I posted a report about doing my first park activation with the Elecraft AX1 super compact antenna. If anything, I felt the activation almost went *too* well using such a small antenna. I didn’t want to give others the impression this is all the antenna you’ll ever need–it’s just a brilliant compact antenna designed for convenience and accessibility. It’s a fun field companion and can be used pretty much anywhere.

Yesterday morning, I had a number of errands to run on the south side of Asheville and had not planned to do a POTA activation. While I was waiting on a curbside delivery, however, I was admiring the nice weather and thinking that I might venture out later in the day to do a Parks On The Air (POTA) activation. Part of me knew, though, that if I returned home, I’d get involved with projects and never make it back out to the field.

I always carry a transceiver and antenna in my car, so I opened the trunk and found my Elecraft KX2 transceiver field kit which included the Elecraft AX1 antenna. Technically, that’s a whole station! Why not give it a go–? I’m always up for a challenge.

Since I would be passing by the Blue Ridge Parkway on the way home, I quickly scheduled an activation on the POTA website via my phone so that the spotting system would know to grab my information from the Reverse Beacon Network (RBN) when I started calling CQ.

Blue Ridge Parkway (K-3378)

I knew this might not be an “easy” activation: I would be using a super compact field antenna that’s quite a compromise in terms of performance, propagation wasn’t exactly stellar, and I was activating a popular (hence somewhat stagnant) park on a Monday morning. Not necessarily ideal ingredients for a successful activation.

I also discovered my phone tripod in the trunk of the car, so decided to make one of my real-time, real-life, no edit videos of the entire successful or failed activation. (Hint: It turned out to be a success.)

Gear:

If you’d like to accompany me on this park activation, check out my video on YouTube:

At the end of the day, the AX1 continues to impress me. It is a compromise? Yes. Does it perform as well as a resonant wire antenna? No. Can it activate a park as well as my other antennas? Yes.

AX1 QSO Map

Click to enlarge

No doubt, part of my success with the AX1 is because I’m primarily using CW instead of SSB to complete activations. I’ve made SSB contacts with the AX1, but I’ve never completed full park activations with it yet–in truth, though, I’ve never tried.

In fact, perhaps it’s just a lucky streak, but so far the AX1 has been as effective as many of my wire antennas in terms of simply completing valid park activations in less than an hour. My signal reports aren’t as strong as they would be with, say, my EFT-MTR resonant antenna or Emcomm III Portable random wire antenna, but it’s enough to get the job done.

If nothing else, I’ll admit that the AX1 reminds me of the magic of low-power radio each time I use it. When I log stations hundreds of miles away, with such a modest station, I feel like I’ve accomplished something.

In short? It’s fun to use.

Black Friday Sale

FYI: I just received Elecraft’s latest Black Friday 2020 ad and noticed that the AX1 antenna package (which doesn’t include the 40M extension) is on sale. Click here to check it out.

Antennas, News

QRPGuys Tri-Band Vertical Antenna

8 Comments

On a tip from my buddy Eric (WD8RIF), I ordered a QRPGuys Tri-Band Vertical Antenna kit last week.

Not only will this antenna pair beautifully with my MTR-3B, KX1, and FT-817ND but I had completely forgotten I ordered it.

When I pulled the QRPGuys package from my post box, it was as if a little Christmas had arrived. I mean, is there a better feeling than getting a new kit in the mail–? I don’t think so.

Time to heat up the soldering iron!

Field Reports, News, POTA

POTA Field Report: One antenna and two transceivers at South Mountains State Park (K-2753)

3 Comments

On Tuesday (Nov 17, 2020), I decided to activate South Mountains State Park (K-2753) for the Parks On The Air (POTA) program. As with my activation at Lake James the day before, it was impromptu. Basically, the weather was beautiful, so I couldn’t resist.

In fact, the weather was so nice, on my way to South Mountains I passed by Bakers Mountain County Park and hiked their full trail including the summit. While on that hike, I ran into Kenneth (W4KAC) who had just activated Bakers Mountain for Summits On The Air (SOTA). This was a bit of serendipity because I, too, plan to activate Baker’s Mountain for SOTA and Kenneth provided some great details for finding the summit (which is not actually on the park grounds).  It was great running into a fellow QRPer and talking shop, too!  I hope to meet Kenneth again in the field.

I arrived at South Mountains State Park mid-afternoon and set up near one of their large covered picnic shelters.

Although I’ve activated South Mountains State Game Land numerous times in the past, I’ve never activated the actual park. The last time I popped by the park, there was already another ham there in the middle of an activation, so I moved to the adjoining game land that day.

South Mountains State Park is a very popular park–indeed, it’s currently the second most activated park in North Carolina.  Although I didn’t realize it at the time because I had no internet access, there was actually another operator somewhere at the park on the air at the same time I was.

Gear:

On the Air

Once again, I set up the Chameleon CHA MPAS Lite vertical antenna for this quick activation.

Besides being such a quick and easy antenna to deploy, I love how stealthy it is, essentially disappearing against a background of trees.

As you might imagine, activating a park while someone else is also activating it is not ideal. At the time, I couldn’t figure out why contacts were coming in so slowly, but no doubt many hunters probably thought they’d already worked me because they worked the other activator.

In the end, though, my biggest problem at South Mountains was the fact my battery died in the Elecraft T1 ATU after finding a match on the 20 meter band. A 9 volt battery should last months in the T1, but the battery I put in it several weeks ago had already been used in another device for a few months. I had meant to replace it with a fresh cell. I actually packed a new 9V battery in my main radio pack, but I didn’t have it with me on this trip because both South Mountains and Lake James were unplanned activations.

I spent a good half an hour on the 20 and 30 meter bands where I had a decent match, but only logged three or four hunters. Conditions were not ideal on the higher bands.

I really needed to move down to the 40 meter band knowing it would be more productive, but I had no way to find a match for the IC-705. (Lesson learned: I’ll never again leave home without my Emtech ZM-2 as a backup!).

Fortunately, I remembered I had the Elecraft KX1 field kit. The KX1 now permanently lives in my car so I know I always have a complete radio kit for impromptu field activations.

The KX1 has a built in ATU, but it’s not as robust and versatile as the T1 or the internal ATUs in the KX2 or KX3.

I tried loading 40 meters and got a 2.5:1 match. I’m sure the KX1 would have plugged along, but I don’t like pushing much over 2:1 when I don’t have to.

After tinkering with the CHA MPAS Lite counterpoise for ten minutes, I finally found a length that, if half suspended, allowed the KX1’s internal tuner to achieve a 1.9:1 match. Good enough!

I started calling CQ on 40 meters and within a few minutes, I logged a total of 12 contacts.

The KX1 saved my bacon that Tuesday!

All in all, I really enjoyed the time at South Mountains State Park. It was beautiful weather and I had an idea spot to set up and operate. I’ll certainly come back here in the future.

I’ve also decided that I’m going to start packing a resonant antenna option in the car with my KX1 field kit. It’s only this year that I started using multi-band and random wire antennas that require an ATU; they are mighty convenient indeed, but it’s always nice to have a resonant option on hand as well.