All posts by Thomas Witherspoon

Field Report: Alan’s P2P POTA Activation Challenge!

Many thanks to Alan (W2AEW) who shares the following guest post:


A self-imposed POTA Park-to-Park Challenge…

by Alan (W2AEW)

One of the things I love about the Parks on the Air program is that every activation is a bit of small challenge.  What will the band be like?  What antenna will I be able to deploy when I get there?  Will I have a spot to setup?  Will my CW ‘ear’ be properly tuned up? You get the picture…

There are a few parks that I activate much more than others – call them my “home” parks.  These are the ones that are close to my home, easy to get to and setup.  One in particular,  Washington Rock State Park (K-1635), is certainly the closest. It has some interesting Revolutionary War History.

Not only is this park very close to my home, it also has pretty good elevation (about 500’) for this part of New Jersey.  In fact, the local fire department hangs a very large illuminated star during the Christmas season at their building that is adjacent to this park.

This star can be seen for miles to the South and East of the ridge.

It’s no wonder that I’ve activated this park more than 20 times in the last year and half.

My XYL Nancy was *very* generous to me this year at Christmas – gifting me a new Begali Adventure CW paddle!  She even had it engraved with my call:

I wanted to think of a unique way to celebrate my first POTA activation using this paddle. I would be going to K-1635, so the location would be very familiar.  Therefore, I thought of an interesting self-imposed challenge…   Attempt to complete an activation with ONLY Park to Park contacts!

As I thought about this, I figured my best chance of success would be to operate on the weekend (significantly more parks are active), and use my most efficient multi-band antenna (a 40m EFHW).

Being an engineer, I’m use to having goals.  I’m also used to having additional constraints imposed – let’s call them stretch-goals.  Possible stretch goals for this P2P Activation Challenge could be:

  • Operate QRP (all of my POTA activations are QRP, so not much of a stretch)
  • Operate only CW (nearly all of my activations are CW, and this helps with the QRP goal too)
  • Attempt this using a more compromised antenna
  • Attempt this during a weekday

It turns out I had a few free hours on Wednesday, December 27, 2023 to play radio…  It was kind of a dismal day weather-wise.  I figured it might be the day to attempt this challenge.  The wet weather had me thinking that I’d setup my SuperAntenna MP1 vertical instead of using the 40m EFHW (and having it and the throw line get all wet and muddy).  The stage was set for the challenge including the stretch goals.

I setup the MP1 on the bedrail of my truck, using an MFJ-1976 ten-foot whip on top.

The band conditions were in pretty good shape, so I figured I had a shot.  I setup the rig inside the truck because of the rain, and got the iPad going with the POTA spotting page to see who I could hunt.  I logged four P2P contacts in the first 20 minutes, so there was hope!

In the end, it took about 90 minutes to log 11 Park-to-Park contacts.  Well, actually 12, since one of them turned out to be a two-fer.  I logged a few “familiar” activators, including Teri KO4WFP – a frequent contributor of Field Reports here, and Jonathan KM4CFT – running a two-fer out of North Carolina.  There were a few that I noted in my paper log because I had a good copy on them, but ultimately couldn’t bust thru the pile ups there were getting (like K7SHR at K-10946 in WY and K0YY at K-4416 in TX).

A personal thanks to all of the activators in my log that helped me reach my P2P Challenge:

  • KL7NL at K-6945 in NC
  • KM4CFT at K-8313 and K-3378 in NC
  • WD4AWD at K-2982 in TN
  • KU8T at K-4208 in IN
  • KO4WFP at K-0659 in FL
  • W0ABE at K-10532 in CO
  • N4XTT at K-2982 in TN
  • NM1L at K-7475 in FL
  • KC1BDJ at K-7879 in FL
  • KI5GBQ at K-7687 in OK
  • NS1C at K-2420 in MA

All contacts were on 20m with the exception of NS1C on 40m.  All were CW.

This was a fun little challenge, one that I hope to repeat in the future.  Hope to see you all on the air – POTA-ON!

72 de W2AEW

More photos of the Xiegu X6200

Many thanks to my buddy, Don (W7SSB), who shares the following photos and product brochure of the yet-to-be-released Xiegu X6200.

The X6200 is not yet in the hands of reviewers, nor is it in production. This hasn’t stopped some people from “reviewing” this unit, so take anything you read up to this point with a grain of salt. A lot of folks have asked me what I think about the X6200, but I won’t comment until I’ve actually gotten a unit and tested it in the field.

I do have a few notes:

  1. I hope Xiegu takes time to have the X6200 thoroughly field-tested prior to production. In the past, early adopters have really taken on the role of Beta testing; it all makes for a very confusing evaluation period. In the same vein, I hope that more of the advertised functionality works from day one.
  2. Xiegu mentions that this unit has improved receiver sensitivity and a lower noise floor–both of these are most welcome. I hope this equates to more refined audio as well.
  3. I hope the receiver front end is more robust and has built-in BCI filtering. Previous models have suffered from overloading.

Of course, I will plan to review the X6200 and give it a thorough shake-down.

Photos:

(Click on images to enlarge.)

Product brochure

Click here to download the preliminary product brochure (as of Dec 28, 2023). [PDF]

Paul’s CW Club Lookup for Logging Applications

Many thanks to Paul Evans (W4/VP9KF) who writes:

If you’re using a logging program and you need instant look-up of who is in what CW Club, you can use the following page, which I look after:

CW Club Call History files: http://www.g4bki.com/club_call_history.htm

These files are kept up-to-date on a daily basis. You’ll see that this currently lists memberships of 117 different clubs, including the vast majority of QRP clubs, a surprisingly high number.

Thank you for sharing this resource, Paul!

Vince Guaraldi Trio: A Charlie Brown Christmas

This Christmas, I thought I’d share a little music that is on heavy rotation here in the Witherspoon household.

Here’s wishing you and yours the very best of the the Holidays!

It’s okay to go a little QRO on the Comfort and Joy!

Click here to listen on YouTube.

KO4WFP: The Countdown Begins with Jack Hill State Park

Many thanks to Teri (KO4WFP) who shares the following guest post:


The Countdown Begins with Jack Hill State Park

by Teri (KO4WFP)

Having completed my kilo for Wormsloe State Historic Site (K-3725) and earned the Marathon Award for the Straight Key Century Club, I needed a new goal into which to sink my teeth. I’ve often set goals in my life as they motivate me to learn and step outside my comfort zone. So what better goal than to activate 60 parks new to me over the next year! I admit it is ambitious; however, goals should excite you as well as make you a little nervous because then you know you are stretching yourself.

How do I plan to accomplish activating 60 new parks? The weeks my son has a break from school offer the perfect opportunity to travel. I can also work in overnight trips to locations in Georgia or South Carolina throughout the year. To save money, I’ll drive on these trips and camp. Most state parks which offer camping are also a park on the POTA list, an easy win-win. For safety, my “POTA pooch” Daisy will accompany me if I am alone, offering an opportunity for the two of us to strengthen the bond we have and work on her training.

My first break-week trip is to Florida during the second week of winter break, December 24th through January 1st. I have nine to ten parks I plan to activate that week, depending on the weather. Daisy and my brother Joseph (no, he is not a ham) will accompany me. Joseph and I took a cross-country trip out west in my twenties and spent six weeks on the road. We mostly camped but also visited friends and relatives along the way.

However, before I leave on my Florida trip, I began my pursuit of 60 new parks with Jack Hill State Park, a park that is only an hour from my new QTH in Bloomingdale, Georgia.

Anyone who knows me knows that I am not a fan of winter. (Spot me this as I live in the Deep South.) However, I am determined to not miss out on POTA because of a little cold weather. Thinking the temperature would be warmer in the afternoon, my dog Daisy and I headed out later than usual on Wednesday, December 13th for our activation.

I enjoy driving in rural Georgia. You never know what you’ll see. Daisy and I went through the town of Bellville, a whistle stop in the middle of nowhere. The town was established in 1890 along the tracks of the Savannah & Western Railroad and was a regional transportation hub for agricultural and timber products. A mural in the town across from the old depot pays homage to the town’s railroad past.

Jack Hill State Park is located in the town of Reidsville, Georgia. It offers amenities that include boating and fishing on the park’s lake, accommodations in the form of camping as well as cottages to rent, a splash pad for kids, and even a free miniature golf course! The park was originally named Gordonia-Altamaha State Park as it is near the Altamaha River. However, it was renamed Jack Hill State Park in 2020 in honor of Senator Jack Hill who was instrumental in the local community. Continue reading KO4WFP: The Countdown Begins with Jack Hill State Park

Field Radio Kit Gallery: KK7ISX’s Xiegu X6100 Field Kit

Many thanks to Todd (KK7ISX) who shares the following article about his portable field radio kit which will be featured on our Field Kit Gallery page. If you would like to share your field kit with the QRPer community, read this post.


KK7ISX’s Xiegu X6100 Field Kit

Hey Thomas, I love perusing the Field Radio Kit Gallery section of your website. It’s helped me dial in my SOTA kit while I’ve been injured this fall so I’d like to pay it forward.

Photos

This is my current set up for my Xiegu X6100:

Equipment list:

[Note: All Amazon and Radioddity links are affiliate links that support QRPer.com at no cost to you.]

André shares a CL program he created to send emails via ADIF files

Many thanks to André (VE2ZDX) who writes:

Hi Thomas,

I have written some pieces of software to automate the sending of emails to callsigns in adif files. I wrote them to help myself and they work very well. One of them I’m making publicly available since it’s very simple and, although it’s pure command line, I believe most hams would be able to use it.

In this video I explain it and teach how to customize it to your needs:

https://youtu.be/zV5nxNsP8MY?si=-a99LDDrXYeDCMLO

This software will send one email per callsign in the adif file you choose. It can be used for many things but it fits very well the use case where you record a POTA activation and want to send the link of the video to everyone in the log. It’s specially ideal for POTA because you can download the log per activation from the POTA website =]

The motivation to create this software comes from the fact that I don’t use paper QSL cards anymore, instead I record the QSO and use YouTube as video storage. And since I have it on YouTube already, why not share with the other ham? They love it!

Also, recordings (audio or video) of your radio activities becomes so as they age! See an example. This is the first time tried QRP on the ham bands:

https://youtu.be/50yzsZfas30?si=_jmr-D9l5TkGR1h5

Just from this recording I learned so many things, such as the speaker I had sucked! You can hear much more in the recording than what I could hear in that session heheh

If you want feel free to share this software with other operators, I’d be happy if it helped more people publish real ham radio content on YouTube, like yours.

73

Thank you so much for sharing this, André. I’m sure there are others who record their activations on video and will benefit from your command line tool! 

October Leaf Colors at Lake James: Pairing the Elecraft KX1 and Chelegance MC-750

This past fall was a busy season for me.

So busy, in fact, I completely overlooked an activation video I filmed two months ago (on Monday, October 23, 2023)!

That said, one of the things I love about making field reports and recording videos is re-living activations a second time. It’s fun to remember the site conditions, the weather, the radio/antenna choices, and all of the folks I might have logged.

I enjoyed stepping back in time a couple of months for this one!

Lake James State Park (K-2739)

That Monday was the first day I surfaced to fit in an activation after fighting a respiratory bug the previous week. I felt much better and tested negative for Covid, so I made my way to Hickory to help my parents with some tasks.

On the way that morning, I stopped by Lake James to play a little POTA with one of my favorite radios in the world: the Elecraft KX1.

On October 23–as I mention in the video–the QRP world had only just learned about the new Elecraft KH1 and I had yet to receive the almost-production unit I ordered as a field tester.

I knew that once I received the KH1, I’d be using it heavily for a few weeks, so I wanted to fit in a little KX1 time in advance!

POTA in Color!

The weather and fall colors at Lake James were absolutely stunning!

New KX1 Tufteln Cover!

Back when I filmed this video, it had only been one week since the W4 SOTA campout where my friend Joshua (N5FY) gave me a few prototype snap-on protective covers for my KX1s.

These covers are very clever because they protect all of the important front-panel components yet remain very low-profile so add little bulk to the radio.

Image: Tufteln.com

Joshua provides two new screws for the front panel (you simply replace out the stock KX1 screw); the cover magnetically snaps onto the higher-profile screws and seats itself securely.

Image: Tufteln.com

I demonstrate my cover in the activation video.

At the time, this was a product Joshua was considering adding to the Tufteln line-up–since then, he’s made it available to order–click here to check it out.

At present, Joshua offers the covers in two colors: black and light brown. Mine are the light brown color.

You’ll notice in the video that Joshua added my callsign to the covers he gave me. I don’t think the production covers are customized with your callsign because Joshua makes these in batches. You would need to check with him about customization–I assume there would be an extra charge and lead time for that because it would require modifying the file and printing a one-off cover.At any rate, I love the covers and have added them to all of my KX1s. Note that I used a Sharpie to write the name of each radio on the cover–this makes it very easy to tell the difference between my KX1 models (they’re named Ingrid, Greta, and Ruby)!

Gear:

Note: All Amazon, CW Morse, ABR, Chelegance, eBay, and Radioddity links are affiliate links that support QRPer.com at no cost to you.

On The Air

It was early enough in the morning that I decided to spend some time on the 40 meter band to work POTA “locals.” I deployed my Chelegance MC-750 with the 40 meter coil.

I tested the SWR and discovered it was high due to a loose connection on the end of the cable assembly–I fixed that and the SWR came down to 2.5:1. With the MC-750, I could have easily lengthened or shortened the whip to get a perfect match, but instead I took the lazy (& speedy) route and simply used the KX1 ATU to get a 1:1 match.

Even though I’d spent a long time talking about the KX1, KH1, the Tufteln cover, etc. in the  video, I actually didn’t have a lot of on-the-air time. (Typical me to talk away my activation time!).

I started calling CQ POTA and the contacts started rolling in.

Within ten minutes, I’d already worked ten contacts.

I worked a couple more, then called QRT. Looking at the time, I had to end this activation earlier than I’d hoped. I needed to hit the road again.

I packed up in short order, but still took a few moments to enjoy the beauty of that lovely autumn morning.

QSO Map

Here’s what this five watt activation looked like when plotted out on a QSO Map:

Activation Video

Here’s my real-time, real-life video of the entire activation.  As with all of my videos, I don’t edit out any parts of the on-air activation time. In addition, I have monetization turned off on YouTube, although that doesn’t stop them from inserting ads before and after my videos.

Note that Patreon supporters can watch and even download this video 100% ad-free through Vimeo on my Patreon page:

Click here to view on YouTube.

Thank you

Thank you for joining me on this activation!

I hope you enjoyed the field report and my activation video as much as I enjoyed creating them. I enjoyed reliving this Octeber activation.

Of course, I’d also like to send a special thanks to those of you who have been supporting the site and channel through Patreon and the Coffee Fund. While certainly not a requirement as my content will always be free, I really appreciate the support.

As I mentioned before, the Patreon platform connected to Vimeo make it possible for me to share videos that are not only 100% ad-free, but also downloadable for offline viewing. The Vimeo account also serves as a third backup for my video files.

Thanks for spending part of your day with me!

Here’s wishing all of the you best of the Holiday Season!

Cheers & 72,

Thomas (K4SWL)

K3ES Activates Waco Mammoth National Monument

Many thanks to Brian (K3ES) who shares the following guest post:


The National Park Service welcomes you to Waco Mammoth National Monument

Activating K-0975, Waco Mammoth National Monument

by Brian (K3ES)

At the end of November 2023, my wife and I loaded her minivan, and headed out into the first significant snowfall of the season.  I had already been out that morning in my 4WD truck to pull a friend’s car out of a ditch, so I was driving carefully.  Our drive took us from our home in northwest Pennsylvania to Baltimore, MD.  Happily, weather conditions improved as we went south and east.  We were meeting our son, daughter-in-law, and 2-1/2 year old grandson for a family trip to Waco, TX (we flew out of Baltimore-Washington International Airport early the next morning).  My wife and daughter-in-law are particular fans of Fixer-Upper and Chip and Joanna Gaines, all based in Waco.  Us men-folk were to be educated in the finer points of appreciating this pop-culture phenomenon.  Ultimately, we certainly did appreciate the finer points of dining in Waco.

One side-trip that amazed us all was a 10 minute drive up the road to Waco Mammoth National Monument.  This relatively new addition to the National Park system is also listed as Parks on the Air (POTA) entity K-0975.  Back in the days when the area occupied by the National Monument was private land, two exploring teenagers, who may not have had proper permission, found a bone, a big bone.  This bone was delivered to a local museum for identification, and ultimately determined to have been the femur of a female Columbian Mammoth.  Legalities being as they are, it took a while longer for the location of the discovery to be made public.  An interested and civic-minded land owner made the process less traumatic than might have been, particularly for the wandering teenagers.  He also started the process to preserve the site and its archaeological treasures for the public, ultimately leading to its designation as a National Monument.  Over subsequent years, archaeological excavation discovered a lot more bones – skeletons from an entire nursery herd of Columbian Mammoths, along with skeletons from other species that visited what was apparently a dangerous waterhole during the last ice age.

A view of the interior of the building constructed to protect the archaeological site.  Near the entry door is a full-sized artist’s rendition of a Columbian Mammoth.  Standing up to14 feet high at the shoulder, Columbian Mammoths were significantly larger than their better known Woolly Mammoth cousins.  This site is unique in that the bones of an entire nursery herd, including multiple females and their young, were found together here.
Some of the partially excavated mammoth skeletons contained in the enclosure building.
Also found in this excavation site was a Western Camel skeleton.  It is thought that the large number, numerous species, and wide range of ages of the skeletons discovered at this site resulted from entrapment in thick mud that formed the bottom of a persistent waterhole.

Since the discovery, many skeletons have been excavated and removed for study, but many more remain at the site awaiting future recovery.  A building has been constructed to cover the excavation and protect the remaining skeletons, and this building is the amazing focal point of the Waco Mammoth National Monument.  Ranger-led tours are available, and very much worthwhile.

Operating QRP CW on a beautiful afternoon at K-0975, Waco Mammoth National Monument.  My station is set up in a grassy field sometimes used for overflow parking.

Setting Up to Activate K-0975

After the tour and a look at the excavation site, I excused myself and set up to activate K-0975.  Before the trip, I had sent an email to Phil – WA5PQL, who is the most frequent activator at K-0975.  He was gracious and helpful in providing information about the park, the staff, and the locations most suitable for activating.  His assistance made a quick, low-stress activation a near certainty.  After checking in with the Park Rangers, I had directions and permissions, so all that remained a concern was HF propagation.

While the previous day had been overcast with drizzle, Friday, December 1, 2023, was sunny and warm.  It was perfect for walking around the site, and for an outdoor activation.  Unfortunately, the same sun that gave us the bright, warm day, had been active producing solar flares that could interfere with radio communications.  The only way to know for sure that I could make contacts was to set up my station and call CQ, so that is the path I chose.

Field kit contained in a re-purposed Peltor 4” x 6” x 9” padded headset pouch.  This compact kit was easily packed in a carry-on backpack for airline travel.  The pouch’s integral handle also made for easy transport to the activation site.

Field kit contents from the upper-left (click image above to enlarge):

  1. 33 gal trash bag for dry seating,
  2. 15 ft RG316 feedline with BNC male connectors,
  3. Two pieces of nylon cord,
  4. Medium-sized pill bottle to be filled with dirt or stones and used as a throw weight,
  5. 80 ft of Marlow Excel 2mm arborist’s throw line,
  6. BaMaTech TP-III paddles with connecting cable carried in an Altoids tin,
  7. Nail clippers as a TSA-approved tool,
  8. Elecraft KX2 transceiver with SideKX end-panels and polycarbonate cover,
  9. Tufteln 9:1 end-fed random wire antenna with 35 ft radiator and 17 ft counterpoise,
  10. Generic ear-bud headphones,
  11. Homebrew VK3IL-designed pressure paddles with adjacent protective sleeve sitting atop a plastic ziploc bag,
  12. Rite in the Rain notepad for logging,
  13. Pentel Twist-Erase 0.9mm mechanical pencil,
  14. Miscellaneous cable ties.

Not pictured is a Packtenna 10m collapsable fiberglass mast that was available, but not used for this activation.

I brought a very small, but capable, field kit based on my Elecraft KX2 and a Tufteln End-fed Random Wire antenna.  A couple of CW keys, a short feedline, and generic earbuds completed the station.  I also brought a notepad and a pencil for logging, a plastic garbage bag for seating, and some cordage.  The most peculiar part of my kit was a small pill bottle with a hole in its lid.  I filled the pill bottle with dirt, passed the end of a 2mm line through the lid and secured it with a knot.  I was able to use the dirt-filled bottle as a throw weight to get the line over a tree branch for raising the antenna, then I detached the bottle and returned the dirt.  All elements of the kit worked as intended, and TSA asked no questions during my trips through airport security. Continue reading K3ES Activates Waco Mammoth National Monument

Field Radio Kit Gallery: KV4AN’s Icom IC-705 Field Kit

Many thanks to Steve (KV4AN) who shares the following article about his portable field radio kit which will be featured on our Field Kit Gallery page. If you would like to share your field kit with the QRPer community, read this post


KV4AN’s Icom IC-705 Field Kit

by Steve (KV4AN)

A requirements-driven portable communication capability, using a modular implementation concept, was the basis for my IC-705 Field Kit.  I’ve loved portable radio operating since shortly after getting my license back in 1975.  My first portable radio was the over-the-shoulder Kenwood TR-2200A 2m FM transceiver.  There is now a happy confluence of advanced electronics technology, customer-focused radio manufacturers, radio sport groups like POTA and SOTA, and hams who want to combine outdoor adventures with their ham radio hobby.   The result is the ability to create and operate highly capable portable ham radio field kits, such as the IC-705 Field Kit that I’m going to describe in this article.

The kit consists of up to three man-packable bags: a Radio Bag, an Antenna Bag, and a Computer Bag, as shown in figure (1).  The Radio and Antenna bags must be brought to every activation, but the computer bag can be left at home if I don’t plan to use digital modes.  I can also swap out Antenna Bags, depending on what kind of antenna you need for the specific activation location and park rules, like: ability to use a ground spike, size of activation area, presence of suitable trees, primary operating bands and expected propagation conditions, and so forth.

Figure 1.  IC-705 Field Kit loaded up and ready for a park activation (click image to enlarge).

Radio Bag

The Radio Bag contains everything necessary to operate the IC-705 in the field.  It can be carried in one hand, worn over-the-should, or worn as a fanny pack.  With the load-out listed below and shown in figure (2), it weighs around 15 lbs.

[Gear links list at end of article.]

A. Icom IC-705 Transceiver.  Chosen for its “all-band”, “all-mode” capability with base station features and performance.  It’s a superb, state-of-the art radio, and a joy to operate – but, it “feels” a little delicate with the large unprotected touch screen and protruding light plastic knobs.

B. IC-705 Front Panel Cover. This was chosen to protect the delicate front panel of the IC-705.  I didn’t want one of the cages, because they add bulk and weight to a reasonably small and light weight radio.  This cover fits perfectly, doesn’t mar the radio body, and provides great impact protection when the radio is not in use.

C. Icom AH-705 Antenna Tuner. This is a good antenna tuner and matches the IC-705 (in appearance and electronic functionality) very well.  It is large compared to the Elecraft T1, but it runs off two “AA” batteries, which I really like.  The tuner uses a BNC coaxial patch cable and a 1/8” stereo patch cable for connection to the IC-705.   I don’t need to use this tuner very often as my antenna typically has a low SWR on 40 – 10 meters.

D. Icom HM-243 Speaker-Microphone. The HM-243 comes with the IC-705.  I’ve never used the speaker part of it, but the microphone has good voice reproduction.  If needed, I planned to use the speaker in place of headphones.

E. N3ZN ZN-QRP Special Iambic Keyer Paddle.  I got this marvelous quality and wonderful feeling paddle in beautiful Blaze Orange – so I feel like I’m the radio operator from a downed aircraft trying to get rescued.  The paddle is a little heavy for portable use, but at least it doesn’t move around while sending.  It uses a 1/8” stereo plug patch cable for connection to the IC-705.

F. Tactical Range Bag. This bag was chosen because the IC-705 fit perfectly in the main compartment and there were additional compartments for all the small accessories.  It also came in Army Green color.

G. Icom MBF-705 Desk Stand. Stabilizes the radio when it is on a table or in the Radio Bag and positions it for easy viewing and operating.

Figure 2. Radio Bag and Contents (click image to enlarge).

H. Icom BP-272 Standard Battery Pack. 7.4v, 1880 mAh pack that came with the radio and attaches to the back of it.  I use this as the spare battery pack.

I. Icom BP-307 High-Capacity Battery Pack. 7.2V, 3150 mAh pack that attaches to the back of the IC-705.  So far, this battery pack has been sufficient for my POTA activations.

J. Tactical Drop Pouch.  This pouch fits in the bottom of the main compartment of the Radio Bag and can hold either a Bioenno 12V, 12Ah, LiFePO4 battery or the front panel cover (used as a spacer).  The IC-705 sits on top of the Tactical Drop Pouch when in the Radio Bag, which elevates it enough that the IC-705 can be easily operated.

K. Smiley Antenna Company TRI-Band.  This is a telescoping 1/4 wave 2m and 5/8 wave 440 antenna that attaches directly to the IC-705.  It performs well with the IC-705 and fits inside the tactical bag when collapsed.  Another advantage of the telescoping whip is it can be adjusted for best SWR.

L. USB Cable.  The USB C to Micro USB cable is used to connect the IC-705 to the portable station computer to control the radio and pass audio and data.  This cable is needed, even if you connect using WiFi for rig control and audio, to send GPS NMEA format position and time data from the IC-705 to the computer.  I was told by Icom Technical Support that the cable should not be longer than 3 feet and should have an RFI Choke at each end.  The combination of the short cable, USB C connector instead of USB A, and the RFI chokes seems to help the noise problem that that the IC-705 has when a USB cable is plugged into it.  The other solution is using the RS-BA1 software.

M. Emergency HF Antenna. This is a home-brew antenna with a 24 1/2 foot radiator and 12 1/2 foot counterpoise that attaches to the AH-705 Antenna Tuner with a BNC to binding post adapter.  It is rolled up on a line winder and there is some paracord to hold up the end of the radiator.  This is a back up antenna in case something happens to the regular antenna.

N. Assorted Coaxial Adapters: BNC to SO-239, SO-239 Barrel, BNC Elbow, and BNC to binding post.

O. Tactical Pen.  A nice heavy pen for outdoors use.   Used for logging.

P. All-Weather Notebook. Weather-proof notepad for outdoor use.  Used for logging.

Q. Leatherman squirt E4: A Swiss Army-like miniature tool set with a wire stripper and screw drivers.  It is used to perform minor repairs in the field.  This tool has been discontinued by the manufacturer.

R. Gerber Recon Task Flashlight.   A rugged miniature flashlight that runs on 1 “AA battery and has different color lens.

Antenna Bag

An Antenna Bag goes on every activation.  The primary bag contains the components of the Chameleon Antenna Tactical Delta Loop (TDL) antenna.  The TDL is a versatile antenna that can be configured as a small Inverted Delta Loop or a 17 foot ground mounted vertical.  I usually use the 17 foot ground mounted vertical configuration because it takes less than five minutes to deploy, performs well, doesn’t attract much attention, and does not require a tuner for 40 through 10 meters.

The Antenna Bag itself is the Sunrise Tactical Gear, Tactical Tripod Bag Gen 2 (32 inch length).  It is exceptionally durable and holds all the components of the TDL antenna.  It can be worn across the back for easy carrying.  The Antenna Bag and all components weigh around 11 lbs. Continue reading Field Radio Kit Gallery: KV4AN’s Icom IC-705 Field Kit