Many thanks to Skip (K4EAK) who shares the following article about his portable field radio kit which will be featured on our Field Kit Gallery page. If you would like to share your field kit with the QRPer community, check out this post.

[I]n my truck I carry a little field kit for impromptu POTA activations.

I also have an FT-891 to an ATAS-120 permanently installed in the truck, which is another possibility for impromptu activations, but that requires me sitting in the truck for the activation. Not my favorite way to activate …

The SW-3B truck kit consists of:

A Venus SW-3B 3-band, QRP CW transceiver
A 40m EFHW antenna (I forgot which one it is), with a link at 30m, giving me 40-30-20-15-10m
A TalentCell 12V battery, with a suitable power cord for the SW-3B
An MK-33 Single Lever Paddle
A Picokeyer, built from a kit (not necessary, but it beats sending CW by hand every time)
No-name Earbuds
An ARRL Mini-Log (I actually do additionally record frequency and RST sent/rec’d, even tho not necessary for POTA)
2mm throw line with a 8-oz Weaver throw weight
25’ of RG-316 coax with BNC connectors on both ends

All in a large Bagsmart electronics travel organizer (the case is too large, but since I only carry it in the truck, it didn’t matter)

With the case hung over a headrest hook behind the driver’s seat.

What a great idea [to share field kits]. I’m really curious to see what others post.

73 Skip K4EAK

Many thanks to Skip (K4EAK) who shares the following guest post:

The QRPguys DS-1 Portable Antenna Kit

by Skip (K4EAK)

There have been several videos and extended comments lately about the Elecraft AX1 and AX2 antennas, both of which function remarkably well for a small, highly compromised antenna.

For those interested in other, similar designs, especially those hams who find that building the equipment is half the fun, another option to consider is the QRPguys DS-1 antenna.

The DS-1 is similar in concept and design to the AX2. It consists of a base-loading coil, a 46.5-inch collapsible whip, and a plate to attach the antenna to a small tripod. One can also purchase an add-on 40-meter coil. The can be deployed in just a couple minutes and, when collapsed, the longest portion is only 6.5” long, easily fitting in the palm of one’s hand. QRPguys recommends a 16.5′ counterpoise; I use two such wires, usually spread out at a 180-degree angle. I’ve also used it with a clamp-on mount and a car window mount.

Building the antenna is simple and took me less than an hour. After installing a BNC connector into a brass plug and inserting the plug onto a length of PEX tubing, one simply runs the supplied 22AWG wire from inside the tubing, out and around making 22 turns, and then sealing it with a length of heat shrink tubing.

There are really only two aspects of assembly that are slightly more difficult. The first is that it’s necessary to drill and tap two holes for 4-40 screws, which obviously means that (1) one needs a 4-40 tap and (2) one needs to be careful tapping the threads to assure a clean cut. The second is that the heat shrink tubing, at least as supplied in my kit, was grossly oversized, which required some finesse in getting a final product that was at least reasonably aesthetic, to say nothing of accomplishing that without dry roasting my fingertips.

Field testing of the DS-1 shows that it works surprisingly well. The SWR is well below 2.0 across almost all of the 20-meter band and where it is higher than that (the upper end of the voice portion), the KX2 internal tuner can tune it easily. As one would expect, on 40 meters the antenna has a somewhat narrower range, although the KX2 tuner has handled it on all of the frequencies I’ve tested so far (all CW). And it appears to be efficient enough.

I have used it on numerous activations and consistently get to the requisite 10 contacts within 20 minutes or so after getting spotted. After that, the number of contacts depends on the time available, but for those occasions when I have only a 30-minute window for an activation, the antenna is a convenient and practical alternative.

I keep the antenna, the tabletop tripod, and the counterpoise wires in the water bottle pocket of my pack, ready for use whenever I have a few moments for a quick activation.