Tag Archives: Lake James State Park (US-2739)

Field Reports, News, Portable, QRP

POTA Field Report: Activating Lake James State Park (K-2739) with the Yaesu FT-817ND

4 Comments

One question that often faces newcomers to the hobby is: “Should I buy a QRP or a 100W transceiver as my first rig?”

That is a very deep topic, actually, and one to explore in a future post. A 100 watt transceiver will certainly give you more options as they can often pump out 100W or be turned down to 1 watt. If you’re a phone operator only, that’s got some serious appeal. Then again, if you’re operating POTA or SOTA where you are the DX, power–while still important–is much less so than, say, if you were at home trying to work DX.

Again, a deep topic for another post because there is no right or wrong answer.

One of our readers (Phillip) reached out to me a couple weeks ago and asked if the Yaesu FT-818 would make for a good first HF rig. He liked the portability factor, the build quality, the HF/VHF/UHF multi-mode coverage, and the overall flexibility of the rig as a field radio. His goal was to do POTA activations.

We had quite a few emails back and forth about the pros and cons and I decided it might make more sense to simply take my Yaesu FT-817ND (which is nearly identical to the FT-818) to the field and activate a park in both SSB and CW. Since I knew he wouldn’t necessarily have an external antenna tuner from day one, I paired the FT-817 with my resonant 40/20/10 meter end-fed antenna.

Lake James State Park (K-2739)

On January 17, 2021, I pulled into my favorite part of Lake James State park and quickly set up my station. I only had about one hour to complete my activation, so knew this would be a very brief excursion. Since I actually had a minimal amount of gear, it was a quick setup.

Gear:

Since I deployed a resonant antenna, there was no tuning or matching involved which not only makes the most of your 5 watts (in that it’s more efficient), but also saves a bit of time in set up and tuning up.

You might note in the video below that my FT-817 has an accessory board attached to the top: G7UHN’s 817 Buddy Board prototype.

I’m testing this prototype at the moment, but didn’t need to employ it at Lake James since it’s really useful when the rig is on your lap or on on the ground. It essentially gives you top-mounted controls and a larger display to read front panel information from above–incredibly useful for SOTA and proper in-the-field activations. Andy’s v3 board will include a memory keyer–I can’t wait for that one!

Since I had Internet access at this park, I used my Microsoft Surface Go logging tablet to spot myself to the POTA network. I started calling CQ on 40 meters phone (SSB) and within six minutes logged eight stations. Not bad for 5 watts and a wire!

Next, I moved to CW on 40 meters and started calling CQ POTA. The POTA spots page auto-spotted me via the Reverse Beacon Network in short order. In eight minutes, I worked six more stations.

I then moved to twenty meters which was essentially dead, so I called it quits a bit early. I needed to pack up and head to my next destination.

Here’s a QSOMap of this short activation (red polylines are SSB and green CW):

I also made one of my real-time real-life no edit videos during this activation if you’re interested:

Truth is, each time I use the FT-817, I love it more. Sure it’s only 5 watts, has no ATU, has a small display, a clicky T/R relay, and questionable ergonomics, but it is a keeper for sure. Even after 20 years of being in production, it still holds its own and is an incredibly popular radio for good reason.

As I told Phillip, the 817/818 is the Toyota Corolla of the QRP radio world.

Field Reports, News, POTA

POTA Field Report: Two quick activations with the IC-705, mAT-705Plus, and CHA MPAS Lite

5 Comments

Back in the days of the National Parks On The Air (NPOTA) program in 2016, I made it a habit of doing multiple park activations in a morning, afternoon, or evening. I’ve done less of this in Parks On The Air (POTA) this year only because my time is more limited. Still, I love doing multiples because it gives me an opportunity to set up, play radio, achieve a valid activation, pack up, move on and repeat. Makes me feel like the only member of a pit stop crew. I love it!

Some call this RaDAR (Rapid Deployment Amateur Radio).

Monday (December 21, 2020) I had a block of time in the early afternoon to fit in up to two activations, en route to the QTH if all went well. While it wasn’t three, four, or five activations in an afternoon, I knew it would be a challenge to fit both in my tight schedule. If an activation took much longer than 30-40 minutes, I wouldn’t be able to complete both.

Since my goal was a quick activation, I reached for the Chameleon MPAS Lite vertical antenna which is so easy to deploy. I paired it with the Icom IC-705 and new mAT-705Plus ATU.

Gear:

Johns River Game Land (K-6915)

My first stop was Johns River Game Land. During hunting season, I spend less time in game lands because parking areas are full and even though I wear a blaze orange vest, I’d rather not be shot if I venture into the forest to set up. 🙂

Johns River has a very accessible large parking area off of a highway near Morganton, NC and I’ve never seen more than two vehicles there at a time.

I arrived on site just before noon on Monday and set up at the edge of the parking area. Unfortunately, this parking area is less than bucolic. Those who use this game land access point leave trash everywhere. You can tell groups gather with pickup trucks, make fire pits, drink beer, break bottles and throw their trash in the woods. Being a firm believer in Leave No Trace, this really, really gripes me.

I found a spot with the least amount of trash and set up in the gravel portion of the parking area so I didn’t drive over sharp objects or step on broken glass.

This is where the Chameleon MPAS Lite came in handy: I plunged its spike in the ground, unrolled the counterpoise, extended the antenna, and I was on the air in perhaps three minutes. No need to walk into the weeds and trees to hang an antenna.

I made a real-time, no-edit video of the entire activation with my iPhone. Since the iPhone was in use, I didn’t take a single photo at Johns River. That’s okay, though, because–as I mentioned–there wasn’t a lot there in terms of scenery. 🙂

Here’s the full video:

All in all, I worked 11 stations in short order. The video above approaches 30 minutes, but much of that time is dialog before the activation started. Toward the end, I also have the Mat-Tuner mAT-705Plus tune from 160-6 meters with the CHA MPAS Lite. If you’d like to skip directly to that bit, here’s the link.

I quickly packed my gear and set my sites on the next activation.

Lake James State Park (K-2739)

I arrived at Lake James State Park around 19:00 UTC and was on the air ten minutes later with the same equipment I used at Johns River.

I love Lake James because there are so many picnic sites and all have tall trees (for wire antennas) and gorgeous views. It doesn’t get any better for a POTA activator. Also, it’s a very short walk to the picnic spots. Since I recently sprained my ankle and can’t hike at present, this is a major plus. Like Johns River, I also have mobile internet access at Lake James which was a huge plus since the POTA spotting page wasn’t pulling spots from the Reverse Beacon Network like it normally does.

The Chameleon MPAS Lite 17′ vertical (above) served me well once again.

I worked 11 stations in short order.

Even though a vertical antenna isn’t optimal in the foothills of western North Carolina (due to poor ground conductivity), it had no problem sending my 10 watts across the US into California and up to Alaska. I still get a major thrill out of MPW (mileage per watt) like this!

I also made a short video at Lake James where I primarily talk about the trade off between convenience and performance with regards to field antennas. I also work a few stations on 30 meters:

Here’s a QSOMap of all of my contact from both Johns River and Lake James on Monday December 21, 2020:

Happy Holidays!

Today is Christmas Eve and I’ve no plans to do an activation (torrential rain, if I’m being honest, is dissuading me).

Instead, I’ll spend quality time with my family here at home. Same for Christmas Day. This evening, we’ll watch some our favorite Christmas shows/episodes: The Good Life (a.k.a. Good Neighbors), The Grinch Who Stole Christmas, and of course a Charlie Brown Christmas to cap off the evening.

I know 2020 has put a damper on gatherings with family and friends–our family has certainly felt it this year. With that said, I think the amazing thing about ham radio is the community we build over the air–it’s certainly been an important community for me, this year especially.

Thank you, radio family!

Here’s wishing you, your family, and your friends the very best of the season!

73,
Thomas

K4SWL/M0CYI

Field Reports, POTA, QRP

POTA Field Report: Lake James State Park (K-2739) with the Icom IC-705 and CHA MPAS Lite

2 Comments

Monday (November 16, 2020), I made a detour to the Catawba River access of  Lake James State Park (K-2739) to try a late morning POTA activation.

I didn’t plot this activation in advance, so had to work with what I had in the trunk/boot of the car.

I did a quick inventory and found my Chameleon CHA MPAS Lite vertical antenna packed and ready to deploy. (I always have an antenna tucked away in the car because…well, because!)

In terms of radios, I had the Icom IC-705 and Elecraft T1 antenna tuner packed as well. Woo hoo! A perfect combo! Let’s go!

Gear:

It was blustery and cold Monday morning due to a front that moved through during the night, so it was no surprise that the picnic area was completely void of (sane) people.

I found a picnic table on the bank that was relatively sheltered from some of the stronger gusts moving across the river. It was still quite windy, though, so I propped the MPAS Lite field pack on the table to provide a bit of a wind break for my log book.

Setup was quick. I don’t think I needed more than 4-5 minutes to have the CHA MPAS Lite deployed. This is one of the advantages of field portable verticals. The disadvantage? Verticals aren’t the most effective antennas in this part of North Carolina where ground conductivity is so poor. Still…I knew I could at least grab my ten needed contacts to have a valid POTA activation.

On the air

I won’t lie: it was slow-going.

For one thing, it was 11:00 local on a Monday morning–not exactly a prime time for a park activation.

I first tried making some SSB contacts on 40 meters and spotted myself on the POTA network. I managed to log 5 hunters in 30 minutes. With patience and time, no doubt, I could log ten SSB contacts, but I didn’t have time to wait, so I moved over to CW.

Oddly, the higher HF bands were in better shape than 40 meters that morning. One of my first contacts was NL7V in Alaska on 20 meters. A most impressive contact with 10 watts into a vertical.

I was on the air a full hour and did manage to log a total of 10 contacts. I’m certain if I would have deployed a wire antenna I would have had even better luck. Indeed, had I thought about it in advance, I could have actually deployed the MPAS Lite as a random wire antenna. (Doh!) That’s one of the great things about this antenna system is that it can be configured so many different ways.  Next time…

Still…I thoroughly enjoyed my time at Lake James State Park. I’ll make this detour again in the near future.

The Icom IC-705 continues to prove its worth as a superb little POTA transceiver!