Tag Archives: Field Reports

Field Reports, News, Portable, QRP, SOTA, Videos

Elecraft KH1 + Speaker Wire = Pileup Madness on Bakers Mountain!

11 Comments

Since the beginning of November, I’ve been pushing my Elecraft KH1 activations to the front of the line so that readers and subscribers who are considering this wee handheld radio might get a chance to see and hear it in action.

So far, I’ve used the KH1 for what it was designed to do: pedestrian mobile/handheld using the built-in whip antenna. I’ve activated a park, a summit, and even did a little parking lot POTA hunting.

I’ve decided that November is KH1 month–this is the only radio I’ll use this month.

I will start blending in some of my field reports from October (there were some really fun ones in there) that feature my other field radios and a variety of antennas starting next week. I’ll still be pushing some of my KH1 field reports to the front during that time as well. Also, I’ll likely post more bonus videos over on Patreon.

Where to activate?

On Monday, November 6, 2023, I had several hours in the afternoon to take the KH1 on another mini radio adventure. I wasn’t sure where I’d perform an activation, though.

This time, I didn’t want to do a pedestrian mobile activation. I wanted to see how the KH1 might play on my kneeboard and how it might pair with my 28.5′ speaker wire antenna. I was curious if its internal ATU would find acceptable matches on all bands.

I packed the KH1, throw line bag, Tufteln Kneeboard, Helinox chair, 2L water bag, camera gear, and speaker wire antenna in my GoRuck pack (FYI: all links and full inventory are below).

This was more gear than I’d need, but all of these items were in my radio box in the trunk/boot of my car.

I had only one errand to run that afternoon: I needed to drop off some of my wife’s illustrated Christmas cards at my friend Hamilton William’s Gallery in downtown Morganton.

After catching up with Hamilton, I had to make a decision about where to go for an activation. I knew this: it was an incredibly beautiful day, so whatever I did, it needed to include a hike!

I considered a few parks but the most convenient spot for a proper hike was Bakers Mountain. It also required the least amount of driving since it was essentially on the way back to Hickory.

Bakers Mountain (W4C/WP-007)

It being an early Monday afternoon, there weren’t many other hikers at Bakers Mountain. In fact, I never ran into any other hikers on the main loop trail.

Bakers Mountain park is (sadly) not a POTA entity. It’s a county park, so does not currently qualify. There was talk once of Bakers Mountain being turned into a state park, but it falls just shy of the amount of acreage needed to qualify.

Bakers Mountain is a one point SOTA summit, but the hike (if you do the full loop trail) is actually pretty strenuous if you take it at a nice clip. I’d consider it a moderate hike overall.

I’ve already activated Bakers Mountain this year, so this activation’s point will not add to my goal of reaching Mountain Goat (1,000 points). That’s okay, though. Unless my family life changes in a way that frees up a lot more time, Mountain Goat is a good 5-6 years in the future at my pace! I’m perfectly fine with that.

I reached the summit and found a spot to set up in the shade. Continue reading Elecraft KH1 + Speaker Wire = Pileup Madness on Bakers Mountain! →

Field Reports, Guest Posts, Morse Code, News, Portable, POTA, QRPp

Guest Post: W8GM’s CW QRP Journey Begins

25 Comments

Many thanks to David (W8GM) for sharing the following guest post:

My CW QRP Journey Begins

by David (W8GM)

It is not really a beginning but for some reason it feels like it.

This a summary of my second ever CW QRP POTA activation which includes a summary of my radio path to this point and a unique encounter that shows how amateur radio operators can be so separated by distance but still somehow manage to build and maintain a sense of community.

Life can sometimes be so strange. I had an interest in amateur radio some 30 years ago but what stopped me? Morse Code.

No way would I learn a dead language so I could talk on a radio! Fast forward to the fall of 2021 when I discovered there was no longer a code requirement to become licensed.

It happened fast. I took the tests, explored the bands from 70cm to 80m and simply felt my way around amateur radio. I discovered POTA and I activated my first park on January 2nd, 2022. I have enjoyed camping, hiking and the outdoors my entire life and I realized that POTA had the potential to bring the outdoors and amateur radio together. However, I was simply a weekend POTA warrior. Most of my activations were from a car or sitting at a picnic table while I was camping.

During this time, I discovered websites such as QRPer.com and The Long Island CW Club and I watched oodles of videos of people combining hiking or remote camping with small radios and practicing amateur radio. I was jealous. However, I knew I only needed to put the pieces of the puzzle together and I could be like those YouTubers I was jealous of.

So really, this is where the journey began. I joined LICW completely ignorant of what a wealth of CW information and education this club offers. I soaked up a lot of that education and continued to follow the QRPers of the world.

Unfortunately, in June of 2022, I took off a full year from amateur radio. But in July of 2023 I was able to return, and I resumed my QRP goals. Once again LICW was there to support me and what follows is the story of my second ever CW QRP POTA activation.

Activation time

I pulled into my parking spot thinking “Wow, I’ve been coming here for over 15 years.” That thought quickly disappeared when I looked at my dash and saw it was 26 degrees Fahrenheit. Southwest Michigan’s first cold week of fall. I grabbed my pack and started heading to my secret spot.

My plan was to set up and then explore the woods most of the morning. Hiking around would keep me warm through the cold morning and I’d try to play radio in the afternoon after it had warmed up a bit. I arrived at my spot and, once again, I found it undisturbed. My leftover firewood was still sitting there in a neat pile. Over the last 15 years I have come here countless times, for as short as an hour and as long as 3 days and never once has anyone disturbed my little 20-foot patch of earth.

I set up my coffee kit, chair, antenna, and radio kit. I used a Packtenna 40m EFHW for an antenna and hung it in a sloper configuration. I did it just like all those QRPing YouTubers do it. I tossed a weighted throw line in the air and had the high end up about 40 feet. The radio was an Icom IC-705 and I put an Elecraft T1 ATU tuner in line for some extra insurance. I plugged in my cwmorse.us paddle and battery pack and I was good to go. But first I headed off to do some exploring before I returned and powered up the radio.

After getting back from exploring, I was ready for some coffee and that was made next. I powered up the radio and thought I’d try starting out on 10 meters. I had learned that a huge advantage of CW is you can be auto spotted on the POTA page. Cell reception at my spot is hit and miss. Some days it is there and others you have nothing but SOS on your phone.

No worries about spotting today. CW wins again.

I called CQ for quite some time and was starting to get nervous until a faint station broke through. And of course, it was the last thing a rookie CW operator needs. The call sign was wrong, or I was failing. Continue reading Guest Post: W8GM’s CW QRP Journey Begins →

Field Reports, New Products, News, Portable, POTA, QRP, QRP Radios, SOTA, Videos

My first SOTA activation with the new Elecraft KH1 handheld QRP transceiver!

14 Comments

On Friday, November 3, 2023, I had planned to activate Mount Mitchell–the highest summit in eastern North America. I need to activate Mitchell soon because I’ve yet to activate it for SOTA in 2023 and when winter weather sets in (quite early at that altitude) the park is inaccessible.

Unfortunately, last week, the National Park Service closed an 8 mile portion of the Blue Ridge Parkway due to (no kidding) park visitors feeding and trying to hold bears at the Lane Pinnacle Overlook.

I won’t get on my soapbox about how people are so out of touch with nature that they feel human interaction with bears is a good thing. It breaks my heart because as we natives of WNC say, “a fed bear is a dead bear.” Bears that become comfortable with humans become (at best) a nuisance and (at worst) aggressive.  This is bad for people and it’s bad for our bears who are otherwise shy and avoid humans.

Okay, I said I wouldn’t soapbox about this…

That 8 mile section being closed meant that what would have been a 50 minute drive to the summit of Mitchell turned into a 90 minute drive. Round trip, I simply couldn’t fit that in my day, so I made alternate plans.

Another summit on my list to activate before year’s end was Richland Balsam.

Richland Balsam is actually the highest summit on the Blue Ridge Parkway and is, in fact, at one of my favorite points along the parkway.

That  Friday morning, I dropped my daughters off at their classes and drove an hour or so to the Haywood-Jackson Overlook.

In the valley, as I started my drive to the parkway, past the Cradle of Forestry, it was 30F/-1C. I was concerned that on the summit–nearly 4,000′ higher in elevation–that the temp would be closer to 20F. Fortunately for me, as I gained elevation, the temperature climbed too. We were having inversion that day so the higher altitudes were actually warmer than lower altitudes. This is not uncommon in the fall and was very welcome that particular Friday morning!

Richland Balsam (W4C/WM-003)

Only three weeks earlier, there would have been no free parking spots at the Haywood-Jackson Overlook overlook–it would have been packed.

Fortunately for me, all of the leaf-lookers had gone and I literally had the place to myself. What a luxury!

And the temperature? A balmy 43F/6C.

The hike to Richland Balsam is one of the easiest along the parkway.

At the north side of the parking area, you’ll see a trailhead for the Richland Balsam Nature Loop Trail.

I wish my iPhone camera could haver truly captured how the moon looked in the sky.

The trail isn’t long; I believe the entire loop is just shy of 1.5 miles.

Although I didn’t set out to do this, I ended up making a video of the entire loop trail hike along with the activation (of course, you can skip over those parts in my activation video below).

Sadly, one thing you won’t be able to enjoy in my video? The smell. The air is filled with the fragrance of balsam trees along the entire trail–it’s just amazing!

The summit of Richland Balsam is at 6,410 feet ASL (1,954 meters).

The summit is covered in trees which is brilliant for SOTA activators. Another luxury is that there are two benches within the activation zone. I did pack my Helinox Zero chair as a backup, but didn’t need it.

SOTA with the KH1

Setting up my KH1 for a SOTA activation couldn’t be easier or faster. I show the whole process in my video at a very casual pace. Continue reading My first SOTA activation with the new Elecraft KH1 handheld QRP transceiver! →

Field Reports, Guest Posts, News, Portable, POTA, QRP, Travel

POTA Field Report: Andrea Activates Two Iconic Cold War Sites

9 Comments

Many thanks to Andrea (IW0HK) who shares the following field report:

Cold War POTA in Berlin

by Andrea (IW0HK)

In the last week of October, I found myself in Berlin for a work commitment.

Taking advantage of two half-days off, I wanted to combine two of my great passions: radio and the history of the Cold War. I chose to visit two historical sites that also serve as a reference point for the POTA (Parks on the Air) ham radio program, allowing me to transmit with my radio in these unique locations.

The first location is a park located about a kilometer away from where I worked for a week, the headquarters of RBB, the public radio and television of Berlin and Brandenburg. This park is Teufelsberg, which literally means the Devil’s Mountain. It is an artificial hill in Berlin, created using the rubble from World War II, located within the Grunewald forest (POTA reference DA-0218).

On this hill, the Teufelsberg listening station of the American NSA in Berlin was situated, which was used to intercept radio signals from East Germany during the Cold War.

Today, you can still see the remains of the antenna covers of the listening base. I activated the Pota park that has been established around the abandoned base, and I was delighted to transmit my signals in Morse code (CW) in QRP mode in this historically significant place.


I used the small QMX transceiver from QRP Labs, a gem for operating in FT8/CW modes on the 80/60/40/30/20 meter bands.

For an antenna, I used a 20-meter wire connected to an EFHW 49:1 balun, hung above a tree. Amid families flying kites, I made 15 CW QSOs, which allowed me to validate the park activation. The program requires a minimum of 10 QSOs for activation to be valid.

The second activation took place in another symbol of the Cold War: the runway of the former Tempelhof airport. I activated this as a POTA site and transmitted CW QRP with the small QMX transceiver from QRP Labs in the fog and cold.

The Berlin-Tempelhof Airport was an airport located in the southern part of the central Tempelhof-Schöneberg district and was operational from 1923 to 2008.

It is famous for hosting the Berlin Airlift base (1948-1949), which was an incredible operation undertaken during the Cold War by the United States and their Western European allies to transport food and other essential supplies to West Berlin, surrounded by the Soviets.

Today, the airport is closed, and its runway has become a massive park (POTA reference DA-0169) used by Berliners for various outdoor activities. I activated it early in the morning on a gray and cold day, setting up my EFHW antenna practically on the runway.

Again, I used only CW, and in no time, I reached the number of 11 QSOs. The cold made me stop the activity earlier than planned, but the activation is still valid. After concluding the transmissions, I walked through the enormous park, imagining its past use and appreciating how often my amateur radio passion leads me to incredible places.

This was the first test of this “minimal” POTA kit with the QMX transceiver, the 20-meter EfHw antenna, and the XTPower XT-16000QC3 12v power bank.

I must say that the test was successful. This is an excellent little radio that I want to use and take with me on every work trip. The POTA program continually takes me to incredible places, both in terms of nature and history, as it did in this case in Berlin

Articles, Field Reports, Guest Posts, News, Portable, QRP, SOTA, Travel

Bob pairs the KX2 and AX1 for ultralight travel-friendly SOTA in Greece

6 Comments

Many thanks to Bob (K4RLC) for the following guest post:

Field Trip to Greece: September & October 2023

 Bob (K4RLC)

A trip to Greece had been on the bucket list for my YL Alanna K4AAC and me for several years. In fact, we had to postpone the trip twice due to COVID. An opportunity arose to take a unique trip to Greece with the University of North Carolina – Chapel Hill, rather than a more touristy cruise. It’s always good to have fellow Tar Heels around, to share experiences.

This trip involved a few days in Athens, seeing the classic archeologic sites such as the Parthenon and the Acropolis, as well as exploring the packed downtown markets, such as Plaka and Monasteraki Square. Then the group would travel to the South of Greece on the Peloponnesian Peninsula staying in a fishing village called Gytheio, founded in the 5th Century BC, and port to the Spartan warriors.   From there, there would be day trips to historic sites. These included a trip to Areopoli, where the Greek revolution against the Turks started in 1821. Another trip would be to Monemvasia, an island fortress founded in 50 AD.  Other trips would be to Mystras (the last outpost of the Byzantine Empire) and ancient Sparta. On the return trip to Athens for departure, the tour would stop in Ancient Corinth, which had been civilized by the Greeks by the 8th century BCE and where the Apostle Paul preached ethics to this Sin City of ancient Greece.

As I had taken the KX1 and KX2 to various places overseas, I, of course, wanted to operate portable radio  in Greece. Past treasured memories included enjoyment operating with the KX1 on Suomenlinna Island, in the Bay of Finland, and with the KX2 in various Caribbean sites, including St. Lucia in 2019.

One of the first things I did was to consult the SOTA Summits Database for peaks we might be near. In the Peloponnesian (PL) region, there are about 180 sites, many of which had never been activated. Once we got there, we found out why. The peninsula is extremely mountainous, with steep barren peaks up to 4000 feet, rising quickly from the shore. In fact, talking with Cristos, our guide in Areopoli and a local young man, he said that he and his friends would hike about 6 to 8 hours to a summit, then spend the night in a cave before returning home. Obviously, this would not fit in with our somewhat rigid tour schedule.

Olive tree grove & Taygetos Mountains
SOTA map of Peloponnesian Peninsula with Gytheio circled

I was very excited to see that Mt. Mystras, where we would visit, also was a SOTA site (SV/PL-012), as well as a UNESCO World Heritage Centre.

I found it curious that Mystras had not been activated since 2017. I found the name of the last ham who had activated this site, and took a chance of sending him an email at his QRZ address. I was very pleased to get a nice reply from Cristos (a common name in Greece, named after Saint, or “Agios” Christopher), who said that he lived in the north of Greece some distance away and had not been back. I asked him if he had to seek permission to activate there. Cristos said they just didn’t ask anybody, but that I should be “careful of the guards” as I’m not a local.

I took his caution under advisement and reached out to the Greek Radio Union. I received a very nice email from Takis, Vice President of the Greek Radio Union. He advised me that my call sign on the Peloponnesian peninsula would be SV3/K4RLC/P. That is, in Greece the geographic location of operation still matters, while it doesn’t in the United States. And I also should use the designator P, identifying as a portable station. Takis went on to write that radio operation in many the archaeological sites is now “prohibited” by the Greek Ministry of Culture and Antiquities. I filed that away for consideration.

The tour was culturally enriching, taking in the incredibly long and complex history of each ancient site we explored. Just as memorable, we were extremely well fed with local cuisine, including fresh fish caught that day, especially eating by the water in Limeni on the West Coast of the Mani Peninsula. I have to admit we ate spanakopita at least once for 10 consecutive days (it’s even served at breakfast)!

The trip to Mystras also included a trip to ancient Sparta, civilized in the 6th and 5th centuries BC. We were fortunate to have an archaeologist who is currently excavating Sparta as a guide to the fascinating history here. On the trip to Mystras, three miles to the west of Sparta, the bus stopped at the tavern where we would return to eat later that afternoon, for a pre-tour bathroom break. Bathrooms are few and far between in ancient sites, and most of our group could be considered geriatric and needed proximity to a bathroom. Mystras  is a 682 meter sharp  peak over the town (see photo). Continue reading Bob pairs the KX2 and AX1 for ultralight travel-friendly SOTA in Greece →

Field Reports, FT8, Guest Posts, Mobile, News, QRP

Field Report: Dave ventures into the fog to play FT8 POTA!

5 Comments

Many thanks to Dave (K1SWL) who shares the following field report:

October 6th POTA activation

by Dave (K1SWL)

I’m pretty much a died-in-the-wool CW guy. I’m not averse to dabbling in other modes, though. Friday, October 6, 2023, was such an occasion. I’d noted that there’d been little recent Digital activity in one of our area’s Parks. As if it needs more familiarity, it looms over I-91 only three miles from the Connecticut river. As a result, it’s been activated more than 75 times.

This was Mount Ascutney State Park in VT, and at 3144′, features a paved road to the summit. Off I went!

Finding a parking space at the summit lot wasn’t an issue. The top of the mountain was socked in above 2500 feet. Visibility was 30 to 50 feet, and sightseers were inexplicably scarce.

I normally use a 20M end-fed antenna and homebrew pneumatic launcher. The stunted trees at that elevation made that less practical. I used instead Hustler resonators for 10M and 20M atop the truck cab on a mag mount. I usually consider that setup a compromise, but at 2000 feet above average terrain (HAAT), it didn’t matter.

The operating position inside the truck is quite comfortable. A melamine-clad slab serves as the operating surface. (see above) The chain at the far end was a design ‘iteration’. I’d originally just supported that end on the passenger-side arm rest. I’d operated from the driver’s side, and one day got out, went around and absent-mindedly opened the passenger door. The whole station headed for the ground. I caught the rig but the Vibroplex Iambic paddles were a loss. A fabulous excuse for a Begali- and a hard protective case! When I’m operating from the truck, an IC-706MKIIg and 15-AH Bioenno battery does the honors. If gear needs to be carried any distance, the KX3 makes more sense. The station itself takes two minutes at most to set up.

So how’d it work out? A closeup of the WSJT-X screen (seee above) illustrates it. (The device is an MS Surface.) I was getting as many as 3 replies to my CQs at a time. I wound up ‘interleaving’ three contacts at a time. It got confusing! I need to look into ‘Fox/Hounds’ operation to speed things up for the future.

All in all- a great success. A total of 62 FT8 contacts in a little over 2 hours. 16 of these were on 10M at the start and the balance on 20M. The attached QSO Map (att. 4) shows the contact distribution- mainly eastern US with a few Europeans for good measure. Will I do it again? You bet!

73- K1SWL

Field Reports, News, Portable, POTA, QRP, QRPp, Videos

Testing the Ionosphere: A 100 milliwatt to 1 watt POTA Activation During a CME? Why not!?

6 Comments

Sometimes, I like the odd “exercise in futility.”

I enjoy shaking up routine and since POTA and SOTA activations are my routine, they end up being the shakers.

On Monday, September 18, 2023, I found out that our planet was rotating into a large CME (Coronal Mass Ejection). This CME made all of the space weather news and we planned for either some potential radio blackouts or at least very unstable conditions.

As I’ve said many times before, I never let the potential for poor propagation stop me from hitting the field. Don’t let it stop you either.

Lake Norman State Park (K-2740)

I had a full afternoon to play radio, so I made my way to Lake Norman State Park.

En route, I tried to think of a way to shake up the activation a bit. I planned to activate at the same spot I had during my last visit because I knew the park’s main trail system was still closed and, frankly, I wanted to take advantage of the EV charger at the visitor’s center again!

I’d packed MW0SAW’s End-Fed Half-Wave (the gift that keeps on giving, Steve) and I did have one new radio toy (more on that later).

I also had a lot of time–at least, more than I normally do during a POTA activation–so I thought it might be fun taking my KX2 down to the lowest power setting it has: 100 milliwatts.

I’ve activated parks with 100mw before, but never intentionally on a day when I knew propagation would be poor.

I figured with enough time, maybe I would get the ten contacts needed for a valid POTA activation.

If not, it would be fun trying!

Why Milliwatting?

At the end of the day, I think taking our radios and antennas to their low-power extremes gives us a taste of what we can actually do with so little signal.

I remember shortly after I bought my first Elecraft KX1 in 2008, I was speaking with a local ham and he told me that a maximum output of three watts was pretty useless and that I really needed a minimum of five watts if I expected to make any contacts.

Part of me did feel like perhaps I’d bought something more akin to a toy–fun to look at and hold, but not terribly practical.

Then I started using that KX1 to make contacts and even carry on extended rag chews. Turns out, three watts gets a lot done!

Today, I’ll often run my MTR-3B with three watts or even less when activating a summit and the results are simply outstanding–fabulous DX and contacts galore.

I know 100mw is a proper compromise, but I like knowing what I can achieve with so little. Tinkering with it in the field and listening to signal reports (also reading RBN stats) gives me a good idea.

In an emergency situation? If I could only push 100mw into a decent antenna, I know it wouldn’t be ideal, but I know it wouldn’t be futile either.

Begali Adventure Dual

Another activation motivation was the opportunity to test my new-to-me Begali Adventure Dual paddles. Continue reading Testing the Ionosphere: A 100 milliwatt to 1 watt POTA Activation During a CME? Why not!? →

Articles, Field Reports, Guest Posts, News, Portable, QRP, Travel

Guest Post: The Full Moon, Eels, and /P Operation on Mount Peyton, NL, Canada

1 Comment
VO1DR on top of Mount Peyton

Guest Post: The Full Moon, Eels, and /P Operation on Mount Peyton, NL, Canada

by Scott (VO1DR)

Introduction

I have been eyeing Mount Peyton in central Newfoundland for years as an attractive spot for /P HF operation.  Even before my radio adventure to Mount Sylvester (reported earlier in QRPer.com), I have been seeking a way to get up Mount Peyton.  Like Mount Sylvester, Mount Peyton is an inselberg of granite protruding above the glacial plain of central Newfoundland.  However, Mount Peyton is even larger and higher; an elongated ridge about 800 m long reaching up to 487 m (1,599 ft) above sea level.  For SOTA enthusiasts, it is designated VO1-CE-005, multiplier 4.

Figures 1 and 2 show the location local topography around Mount Peyton.

Figure 1 – Highway map of central Newfoundland showing Mount Peyton and landmarks
Figure 2 – 1:50,000 scale map I used during trip showing topography near Mount Peyton and our hiking route.  Each block is 1 km on a side.

Mount Peyton is a case of “so near and yet so far”.  Just west of Gander, this ridge is visible in the distance south of the Trans-Canada Highway (the main arterial highway traversing the island of Newfoundland).  However, in summer there is no trail directly to the top, and access to its base is only via rough ATV tracks and wet bogs.  One must get to the base of the mountain, then hike overland to the south side and climb a long inclined cleft in the hillside to the top.  This cleft is the surface trace of a fault in the underlying granite (see route on Figure 2).  By contrast in winter, Mount Peyton is a popular and readily accessible snowmobile destination with dozens of machines roaring up this same cleft on a thick blanket of snow.

The Full Moon and Eels

Looking at maps and Google Earth, an approach on foot would entail a three-day hiking trip.  While this sounds delightful, my current living situation would not permit this, and in addition I have no hiking buddies able and willing to make such a commitment.  So, it became clear I needed all-terrain vehicles (ATVs) to get quickly to the base, so we could do the entire trip in one long day.

I don’t own an ATV and after multiple attempts over this summer to find any ATVers interested in such an adventure, there were no takers.  Apparently ATVers like to ride, but don’t like to get off their machines ?. I finally found a local outfitter (Paul) who not only could supply ATVs, but had hiked multiple times to the top of Mount Peyton – a perfect fit.  For safety, I needed at least one extra person to go to the top.  All other potential radio or hiking companions fell by the wayside for various reasons, so it became just me and Paul.

As is common in rural Newfoundland, Paul is a Jack of all trades and is also a commercial eel fisherman.  American Eels (Anguilla rostrata) have a fascinating life history (https://en.wikipedia.org/wiki/American_eel) and inhabit freshwater rivers and streams in Newfoundland.  Paul harvests them in conical net traps anchored to the stream bottom (Figure 3).

Figure 3 – An eel trap in place in a local stream.  Eels move into the large mouth and get trapped in the bottom cage.

He told me that eels run during the new moon and stay put near the full moon.  Now doesn’t that ring deep bass notes of evolutionary biology!?  Since eel fishing is an important part of Paul’s income, we agreed to fit in my radio around his eel-catching.  He would be available around the full moon when the eels were sluggish; toward the end of September, the moon was full on the 29th.  Given the local weather, we settled on Tuesday, September 26 as our day.  Isn’t life fascinating – the moon controls eel movement, which controls human movement, which controls our /P radio expedition!

Getting There was Half the Fun

I drove from St. John’s to Paul’s cabin west of Glenwood, NL on the afternoon of Sep 25, on the beautiful shores of Indian Arm Pond (Figures 4 and 5).

Figure 4 – Paul’s cabin on Indian Arm Pond
Figure 5 – Shoreline of Indian Arm Pond

We planned an early departure on the ATVs.  Sun-up was around 7 am and sun-down was about 7 pm, so we had 12 hrs of daylight to work with.  September 26 dawned bright and clear (Figure 6) and we were soon packed and underway on two ATVs (Figure 7).  We drove for over 2 hrs on a wide range of roads, tracks, and rough trails to a point where we dropped the ATVs and started hiking (one way distance 26.7 km or 16.6 mi).

Figure 6 – Dawn over Indian Arm Pond on September 26.  Time to get moving!
Figure 7 – Scott on Polaris 450 ATV ready to go.  Black lumbar pack on right.  Blue survival bag on left.  Pole strapped on my left.  Radio and spare water in elbow compartments.
Figure 8 – Turtles are huge in Newfoundland
Figure 9 – Passing over beautiful Neyles Brook.  This is quintessential central Newfoundland scenery.
Figure 10 – Magnificent Mount Peyton looms in the distance.  This view is toward the nearly-vertical NW face.  We are about half-way there.  After dropping the ATVs, we will hike around the right end and climb up the far (SE) side.

This trip reinforced that I am not a motor sports guy.  The ATV ride was long, bone-jarring, and noisy.  Buying an ATV at great expense and doing this for “fun” is a mystery to me; and forget about seeing any wildlife.  But, hey, the ATVs got us there; we couldn’t have done this trip without them! Continue reading Guest Post: The Full Moon, Eels, and /P Operation on Mount Peyton, NL, Canada →

Antennas, Field Reports, News, Portable, POTA, QRP, Stealth, Videos

A Trailside, Low-Impact, Knee Board POTA activation at the Carl Sandburg National Historic Site!

9 Comments

On Friday, September 15, 2023, my wife and I had a few hours midday to enjoy the gorgeous pre-fall weather, so we decided to go on a hike with Hazel.

My wife was the one that suggested I pick out a hike that would open the door to a short POTA activation (isn’t she the best–?).

Carl Sandburg National Historic Site (K-0804)

Earlier that week, I made a note to activate the Carl Sandburg National Historic Site in the village of Flat Rock, North Carolina. I passed this idea by my wife and she agreed that it’d make for a perfect outing.

The mission of the Carl Sandburg National Historic Site is to preserve Connemara, the home of Pulitzer Prize-winning poet and writer Carl Sandburg.

The park has a wonderful trail network and I hadn’t visited it since 2016, during the National Parks On The Air (NPOTA) ARRL event.

Technically, I could go back into my NPOTA logs and upload my Sandburg activations to the POTA site because previous activations do count, but I’m not actually motivated by my park count so much as I am just having fun working new-to-me sites under the new POTA program.

That said, my somewhat flexible, non-committal goal of having at least 100 unique parks activated for POTA before the end of 2023 was also on my mind; a small motivator to expand my POTA footprint.

Admittedly, there really aren’t many parks that are within two hours of my QTH that I haven’t already activated for POTA. The ones left, like Sandburg, are just outside the corridors I normally travel.

The Sandburg site is a beautiful one, and I think Hazel may have even remembered this spot from so many years ago. My wife and I got a kick out of how giddy she was to hit the trails, smell the smells, and meet all of the other hikers.

Hazel: “Enough talking, Dad! More hiking!”

Time to hit the trails and find an activation spot!

Knee Board Portable!

Back in 2016, I got permission from a Sandburg park ranger to place a wire in a tree in order to perform my NPOTA activation. She only asked that I perform my activation on the trail network (not at the house and goat farm).

Wow…I just checked and I had forgotten that I made a short field report of that activation over on (my other blog) the SWLing Post—check it out here.  Back then, my KX2 was still very new and shiny!

Not even a scratch on the KX2 back then! Today, Hedy looks a little more field battered! 🙂

And here we are seven years later and I’m still activating the Carl Sandburg site from my lap. This time, however, I don’t have my radio on a clip board, I’m using a folding knee board:

This is my Tufteln/N0RNM folding knee board and you’ve seen me use it in numerous activation videos.

Instead of just placing my logs and radio on the knee board, like I did back in 2016, I wanted to place my entire antenna system on it, too.

You see, although I’m sure the staff at the Sandburg home wouldn’t mind me putting a wire in their trees along the hiking trail, I couldn’t find a staff member to ask, so I used this as an excuse to try something I’ve always wanted to do: mount my AX1 on the knee board as well!

We found a park bench a mile up the trail and decided to set up there. Continue reading A Trailside, Low-Impact, Knee Board POTA activation at the Carl Sandburg National Historic Site! →

Field Reports, News, Portable, POTA, QRP, QRP Radios, QRPp, Reviews, Videos

Getting To Know You Series: The Elecraft KX3–My thoughts, notes, and one extreme QRPp contact!

16 Comments

I’m very fortunate in that in the past few years I’ve accumulated a number of QRP radios that I use in rotation when I do park and summit activations.

I’m often asked for advice on choosing radios, and as I’ve mentioned in the past, I feel like the decision is a very personal one–everything is based on an operator’s own particular preferences.

Over the years, I’ve written formal reviews about most of the field radios in my collection. In those reviews, I try to take a wide angle view of a radio–to see how it might appeal to a number of types of operators. I highlight the pros and cons, but I don’t focus on my own particular take because, again, my style of operating might not match that of readers. I try to present the full picture as clearly as I can and let the reader decide.

The Getting To Know You series gives me an opportunity to highlight one radio at a time and showcase what I love about it and why it’s a part of my permanent radio collection. After we spend a bit of time talking about the radio, we’ll do a park or summit activation with it!

The Elecraft KX3

I was originally introduced to the Elecraft KX3 at the 2011 Dayton Hamvention–over a decade ago at time of posting!

I was commissioned to write a review of the KX3 for the Monitoring Times Magazine and Elecraft was kind enough to lend me a brand new KX3.

At the time, there was nothing like the KX3 on the market and I felt like I’d just received a radio from the future.

The KX3 offered 160-6 meter general coverage with an optional 2 meter module, ATU, internal AA battery compartment, and roofing filters. The controls were top mounted and current draw in receive was as little as 150 mA. At the time, there was no other radio on the market that could compare with the KX3’s field prowess.

But it wasn’t just its field design that was impressive.

In fact, when Rob Sherwood tested the KX3, it placed at the top of his list which is sorted by Third-Order Dynamic Range Narrow Spaced.

This field radio sported a bullet-proof front end and true contest chops, displacing $10,000+ high-end rigs.

Today, the KX3 (at time of posting) is still number 12 on Rob’s list. An impressive feat!

Herein lies the danger of doing reviews…

I didn’t have the KX3 in my grubby little hands for more than a few hours when I decided I had to buy one. I sold some gear to free up money and I bought the KX3 Elecraft sent me on loan for the full price.

I’ve taken this KX3 on numerous activations and on international travels. It’s a brilliant QRP companion.

These days, it’s in the shack more than in the field because I keep it hooked up to my KXPA100 amplifier. I feel like the KX3/KXPA100 combo is like having a poor man’s K3. As a huge bonus, the KX3 takes up little space on my table and the KXPA100 sits on a shelf–the overall footprint is much smaller than a K3 or K3s. It’s like having a remote head on my desk and works perfectly for my limited space shack.

The KX3 is a stellar, benchmark field radio, so it was great fun to feature it in this video.

Zebulon B. Vance Birthplace (K-6856)

For this Getting To Know You report and video, I decided to activate one of my favorite local parks on September 12, 2023: the Vance Birthplace. Continue reading Getting To Know You Series: The Elecraft KX3–My thoughts, notes, and one extreme QRPp contact! →