Category Archives: Videos

Field Reports, Morse Code, News, Portable, POTA, QRP, QRP Radios, Videos

First Field Outing with My New-to-Me Elecraft K1!

4 Comments

In the chaos of the past two months, I managed to post a few field reports out of chronological order. I’m probably the only one who notices—these aren’t sequential stories, after all—but since I was there for each activation, it feels odd when the timeline’s off.

Case in point: you might recall this recent post where I shared how I finally landed an Elecraft K1 field-portable transceiver. I’d been hunting for a K1 for years, so I was thrilled when this one popped up locally in North Carolina.

Last month, I published this field report where I paired the K1 with my AX1 antenna for a low-profile (but high-performance) activation in Pisgah National Forest.

But here’s the thing: that was actually my second activation with the venerable K1. The first one? It took place along the Blue Ridge Parkway on February 24, 2025.

Taking the K1 to the Field!

It’s always exciting to take a new radio to the field—especially one I’d been chasing for so long. I purchased the K1 back in August of last year. As soon as it arrived, I tested it and realized it was in serious need of alignment.

I brought it over to my friend Vlado (N3CZ), hoping to use his signal generator to sort it out. Unfortunately, we didn’t have time that day, so I left the rig at his QTH. Then Hurricane Helene hit, and… well, suddenly it was 2025.

We finally got around to the alignment in February. As soon as it was dialed in, I hit the field.

Blue Ridge Parkway (US-3378)

I made my way to a familiar spot along the Blue Ridge Parkway—the Folk Art Center—and set up the K1.

Mine is a four-bander (40, 30, 20, and 15 meters) with both the optional internal ATU and AA battery pack. To give the internal tuner a little workout, I paired it with my trusty Tufteln 9:1 End-Fed Random Wire antenna.

Once deployed, I hit the ATU button, and the K1 quickly found a solid 1:1 match. With logs at the ready, it was time to hit the airwaves!

Gear

Note: All Amazon, CW Morse, ABR, Chelegance, eBay, and Radioddity links are affiliate links that support QRPer.com at no cost to you.

Radio

  • Elecraft K1 (four band version with optional ATU and internal AA battery pack)

Key

Antenna

Pack and Case

Logging Supplies

Battery

Camera/Audio Gear

On The Air

I started calling CQ POTA on 20 meters, thinking I’d eventually migrate to 30 meters if things slowed down. Continue reading First Field Outing with My New-to-Me Elecraft K1! →

Events, Field Reports, Morse Code, News, Portable, POTA, QRP, Videos

Ham Radio Workbenches On The Air Field Report: Part 2

1 Comment

As promised, here’s Part 2 of my extended HRWBOTA activation report from March 16, 2025!

(US-6856)

As I mentioned in Part 1 of this activation, I’d planned to operate for the full four-hour window of the March 16th Ham Radio Workbenches On The Air (HRWBOTA) event—a rare luxury for me. Most of my field activations typically last anywhere from 30 to maybe 90 minutes at most. So, sitting in one spot and operating for four full hours definitely stretched me a bit—but in a good way!

After two hours of non-stop CW with the Elecraft KX3, I took a brief break, swapped radios, and continued the activation with my Penntek TR-45L.

This portable rig is one of my favorite minimalist CW transceivers, and I thought it was a perfect fit for the second half of the HRWBOTA event. I used it to work 20, 30, and 40 meters in CW (in that order).

One nice bonus of using the TR-45L is that mine has a built-in Z-match ATU, which allowed me to easily find a match on 30 meters, even though the Spooltenna EFHW isn’t resonant on that band. The antenna was the same excellent 40-meter EFHW prototype from Rob (KO4HUI) that I featured in Part 1.

The only other minor change during this segment of the activation was behind the camera. Since I was filming in real-time for four straight hours, I had to pause at one point to connect my action camera to a portable battery pack which then limited my ability to use wireless microphones with wind screens. The gusty wind will be more noticeable in this portion of the activation video as a result—but, hey, it’s all part of the field experience!

Now, let’s dive into Part 2 of the gear and activation details…

Gear

Note: All Amazon, CW Morse, ABR, Chelegance, Spooltenna, eBay, and Radioddity links are affiliate links that support QRPer.com at no cost to you.

Radio

  • Penntek TR-45L with built-in rechargeable battery and Z-Match antenna tuner (discontinued)

Antenna System

Battery

Key and Accessories

Logging

Packs/Cases

Camera and Audio Gear

On the Air

As I mentioned in Part 1, this was a longer activation, and since I needed to submit electronic logs to HRWBOTA admin Mark (N6MTS), I skipped paper logging—a true rarity for me.

Instead, I logged directly into AC Log on my Microsoft Surface Go, just as I would during Field Day.

During this second part of the event, I started on 20 meters and spent a little over an hour working a steady stream of contacts. Continue reading Ham Radio Workbenches On The Air Field Report: Part 2 →

Field Reports, Morse Code, News, Portable, POTA, QRP, Videos

Ham Radio Workbenches On The Air Field Report: Part 1

6 Comments

Many of you likely know that I’m on the crew of the Ham Radio Workbench podcast and that, in December 2023, we hosted the first Ham Radio Workbenches On The Air (HRWBOTA) event.

Unfortunately, I had one scheduling conflict I couldn’t change, which meant starting the event with my KH1 in a downtown Asheville parking lot before heading to Lake James State Park for a couple of hours of solid pileups with my Icom IC-705. I posted a field report and video of the event—it was a blast! Click here to check it out.

On March 16, 2025, we held our second HRWBOTA event, and this time, I was better prepared with a clear schedule and a plan to operate for the full four hours!

Zebulon Vance Birthplace (US-6856)

Of course, even the best-laid plans can run into hiccups, and mine did. I was delayed due to some chainsaw work I wanted to complete before leaving home. As a result, I arrived at US-6856 just as the event was starting (14:00 local).

No worries, though! I turned on the camera and wasted no time deploying my antenna and setting up my radio gear.

The Spooltenna!

For this activation, I used a prototype of the Spooltenna, designed by Rob (KO4HUI).

Rob, a fellow North Carolinian, had been in touch with me about his antenna idea for months. Back in February, when my daughter interviewed for a scholarship at NC State University (which she was later awarded!), I met up with Rob on campus, and he handed me an early prototype of the Spooltenna. He had just completed the build that very morning.

It’s a unique design based on his own needs for a field antenna. From his website:

SPOOLTENNA is a compact, lightweight antenna designed for portable amateur radio operations like Parks on the Air® (POTA) and Summits on the Air™ (SOTA). Its innovative spool form factor is intended to ensure efficient deployment, teardown, and storage, providing a frustration-free operating experience that doesn’t compromise performance.

The design is also Open Source under a Creative Commons Attribution-ShareAlike 4.0 International License.

The Spooltenna he gave me is a 40-meter end-fed half-wave (EFHW). Before this activation, I had only set it up at home to check resonance on 40, 20, 15, and 10 meters. I deployed it as a sloper, with the transformer at the highest point.

The Spooltenna is quick to deploy–by placing a pencil, tent stake, or screwdriver in the center hole–and the spool design ensures a tangle-free wind-up. The components feel very high-quality. Rob is also producing high-quality cable assemblies, which were included in the package he gave me.

Rob has rapidly turned this idea into a side business involving his whole family. In just two months, his wife Christi has launched a website, ordered inventory, and—just a week ago—even set up an affiliate program and coupon code offering free shipping to QRPer.com readers.

Rob will be at the Raleigh Amateur Radio Society hamfest this weekend. He plans to attend FDIM and Hamvention in Dayton next month with inventory.

UPDATE: Rob tells me that he will have some inventory at RARSfest this weekend and will even temporarily open up his website for Spooltenna orders tomorrow (Saturday, April 4, 2025) during the RARSfest. 

Again, I’m most impressed with all that he and his wife have accomplished in a few months.

Deploying the Spooltenna was easy, though I had to adjust my setup. I originally planned to support the transformer with a tree next to the picnic shelter, but that tree had been blown down during Hurricane Helene.

No worries! I set it up as a sloper with the transformer close to the ground—similar to many of my EFHW deployments.

My HRWBOTA Activation Plan

I planned to use two radios during this activation—first my Elecraft KX3, then my Penntek TR-45L on the lower bands.

To maximize the chance for HRWB listeners to work me:

  • I did not spot myself on POTA.app, even though I was giving all contacts POTA credit. I knew that if I spotted myself, the normal weekend POTA pileups might make it harder for HRWBOTA participants to contact me.
  • I started on 10 meters and slowly worked my way down.
  • If time allowed, I planned to work SSB on at least one band (spoiler alert: CW kept me too busy!).

First up was the Elecraft KX3! I set up the radio and wasted no time getting on the air.

Gear:

Note: All Amazon, CW Morse, ABR, Chelegance, Spooltenna, eBay, and Radioddity links are affiliate links that support QRPer.com at no cost to you.

Radio

Antenna System

Battery

Key and Accessories

Logging

Packs/Cases

Camera and Audio Gear

On the Air

Since this was a long activation and I needed to submit electronic logs to HRWBOTA admin (Mark, N6MTS), I skipped paper logging. Instead, I logged directly to AC Log on my Microsoft Surface Go, just as I would during Field Day. Continue reading Ham Radio Workbenches On The Air Field Report: Part 1 →

Field Reports, Morse Code, News, Portable, POTA, QRP, Videos

Pairing the Elecraft K1 and AX1 for low-profile, low-impact portable POTA!

10 Comments

Friday, February 28, 2025, felt like another “rinse and repeat” day—a pattern I’ve grown used to over the past few weeks.

That morning, I woke up early, published a post on QRPer.com, and by 7:30 AM I was outside with my chainsaw, preparing piles of tree debris for the skid steer operator we hired to move it to the roadside.

As you might imagine, he can collect debris much faster than I can cut and prepare it, so my goal has been to stay ahead of him. I worked steadily all morning and, combined with what I had cut the previous day, managed to prepare enough to keep him busy for the rest of the day. That was fortunate because I needed to help my daughters with activities in town all afternoon.

Finding POTA time

I’ll be honest—after grabbing a quick lunch and a shower, I was pretty worn out. Part of me wanted to use any spare time to sneak in a nap. But I also knew I could use a little POTA therapy, and the weather was unseasonably gorgeous—almost spring-like.

Looking at my schedule, I realized I had about an hour to spare, enough time to detour and activate Pisgah National Forest (US-4510) at the Sycamore Flats Picnic Area. It was the most convenient spot along my route that afternoon.

As for radio gear, I already had my Elecraft K1 packed from an earlier activation that week (which I also recorded and will post soon—obviously, out of chronological order!).

For variety, I didn’t want to use the same antenna as the previous activation. Instead, I grabbed one of my favorite compact antennas to see how well it would pair with the K1: the Elecraft AX1.

If you’ve followed QRPer for long, you’ll know I often use the AX1 during both POTA and SOTA activations. Despite its extreme size compromise, it has always performed well for me.

Loaded verticals like the AX1 typically have a high Q (narrow bandwidth) and benefit from an ATU or capacity hat to help with impedance matching. Luckily, my new-to-me Elecraft K1 has the optional built-in ATU, meaning I could attach the AX1 directly to the back of the radio.

I’ll save the full story of how I acquired this particular K1 for my next field report, but let’s just say I’d been hunting one for a long time—and this one showed up locally. It’s a four-band version (40, 30, 20, and 15 meters) with both the ATU and internal AA battery pack options.

Sycamore Flats Picnic Area

I arrived on site around 13:35 local time and had about 45 minutes to play radio.

I started the activation video and walked through the picnic area until I found a good table. Truthfully, though, the beauty of using the AX1 is that almost any flat surface will do—it’s that low-profile and low-impact.

Once I found a table, setup was super quick: I placed the K1 on the table, connected a battery, attached my Palm Mini paddle (its maiden POTA voyage!), and plugged the AX1 directly into the back of the radio. I wasn’t in a hurry–and it truly shows in the video–but I’m confident I could have deployed the entire station in about 60-90 seconds if required. That’s the magic of the AX1—minimal setup time.

With everything connected, it was time to hit the airwaves!

Gear

Note: All Amazon, CW Morse, ABR, Chelegance, eBay, and Radioddity links are affiliate links that support QRPer.com at no cost to you.

Radio

  • Elecraft K1 (four band version with optional ATU and internal AA battery pack)

Key

  • Palm Mini Paddle with new connection cord

Antenna

Pack and Case

Logging Supplies

Battery

Camera/Audio Gear

On The Air

Once on the air, I was thrilled to have no problem collecting hunters for the logs. Continue reading Pairing the Elecraft K1 and AX1 for low-profile, low-impact portable POTA! →

Field Reports, News, Portable, POTA, QRP, Videos

QRP POTA with Vlado: Penntek TR-45L “Skinny” in Pisgah National Forest (Part 2)

1 Comment

On February 9, 2025, my good friend Vlado (N3CZ) and I headed out to Pisgah National Forest (US-4510) near Looking Glass Falls for a joint POTA activation.

This is Part 2 of our activation — if you missed Part 1, you can check it out here!

While I typically write much longer field reports, I’m still in the final days of Hurricane Helene debris removal around our property, which has been my main focus.

As with Part 1, I’ll keep this one short and sweet–a postcard-style field report. I truly appreciate everyone’s understanding!

Pisgah National Forest (US-4510)

After wrapping up Part 1 with the Elecraft KX1, we decided to switch things up for the second half of our activation.

We swapped the KX1 for the Penntek TR-45L skinny and replaced my paddles with the TouchPaddles Model P1. The antenna setup remained the same: the QRPGuys Portable No Tune End Fed Half Wave, which continued to perform like a champ.

The weather, again, was amazing — sunshine, cool air, and the peaceful sounds of the forest surrounding us.

Vlado added more QSOs to his log, making the most of the lively bands.

When it was my turn to jump back in, I logged 18 contacts in 19 minutes before we had to call QRT for the day.

It felt like one of those activations you never want to end. As always, the TR-45L was a pure pleasure to operate.

Gear:

Note: All Amazon, CW Morse, ABR, Chelegance, eBay, and Radioddity links are affiliate links that support QRPer.com at no cost to you.

Radio

  • Penntek TR-45L “Skinny”

Antenna System and Throw Line

Key

Battery

Camera and Audio

QSO Map

Here’s what this five-watt activation looked like when plotted out on a QSO Map. Please note that all of the orange lines are the QSOs from this part of the activation on 30 meters.Click on the map image to enlarge.

Activation Video

Here’s my real-time, real-life video of the entire activation.  As with all of my videos, I don’t edit out any parts of the on-air activation time. In addition, I have YouTube monetization turned off, although that doesn’t stop them from inserting ads before and after my videos.

Note that Patreon supporters can watch and even download this video 100% ad-free through Vimeo on my Patreon page:

Click here to view on YouTube.

Thank you

Thank you for joining us during this activation and for understanding why I’m keeping the field report portion on the short side! 🙂

Of course, I’d also like to send a special thanks to those of you who have been supporting the site and channel through Patreon, and the Coffee Fund. While not a requirement, as my content will always be free, I really appreciate the support.

As I mentioned before, the Patreon platform connected to Vimeo makes it possible for me to share videos that are not only 100% ad-free but also downloadable for offline viewing. The Vimeo account also serves as a third backup for my video files.

Thanks for spending part of your day with us! Have a wonderful weekend!

Cheers & 72,
Thomas (K4SWL)

PS: Consider joining our QRPer.net discussion board! It’s an active community of radio operators who enjoy helping and supporting each other. It’s also the best place to ask any questions you might have about radios, field activities, antennas, or pretty much anything amateur radio. Click here to join.

Field Reports, Morse Code, News, Portable, QRP, Videos

QRP POTA with Vlado: Elecraft KX1 in Pisgah National Forest (Part 1)

7 Comments

On February 9, 2025, my good friend Vlado (N3CZ) and I headed out to Pisgah National Forest (US-4510) near Looking Glass Falls for a joint POTA activation.

This is Part 1 of our activation — and while I typically write much longer field reports, I’m still in the final stages of Hurricane Helene debris removal around our property.

To keep things moving, I’ll keep this one short and sweet–a postcard field report length. I truly appreciate everyone’s understanding!

Pisgah National Forest (US-4510)

The weather couldn’t have been better for our outing — crisp, cool air with bright sunshine filtering through the trees. It was one of those perfect days where you feel lucky just to be outside, let alone playing radio with a great friend.

Our activation video below captures the entire activation from Vlado deploying the antenna, to setting up the radio gear and both of our activations.

Vlado kicked things off with his trusty Elecraft KX1 hooked up to an end-fed half-wave he built himself.

After he wrapped up his activation, he handed the controls over to me. I logged 41 contacts in 39 minutes — the bands were lively, and the little KX1 was working like a charm. (Golly I love this radio!)

We stopped the video there to wrap up Part 1, but we weren’t quite finished yet. We switched to a different radio and kept the POTA fun going for a while longer — stay tuned for Part 2 next week, where we dive into a new setup and share more of the adventure!

Gear:

Note: All Amazon, CW Morse, ABR, Chelegance, eBay, and Radioddity links are affiliate links that support QRPer.com at no cost to you.

Radio

  • Elecraft KX1

Antenna System and Throw Line

Key

Battery

Accessories

Camera and Audio

Logs

QSO Map

Here’s what this five-watt activation looked like when plotted out on a QSO Map. Please note that all of the blue lines are the QSOs from this activation on 20 meters.Click on the map image to enlarge.

Activation Video

Here’s my real-time, real-life video of the entire activation.  As with all of my videos, I don’t edit out any parts of the on-air activation time. In addition, I have YouTube monetization turned off, although that doesn’t stop them from inserting ads before and after my videos.

Note that Patreon supporters can watch and even download this video 100% ad-free through Vimeo on my Patreon page:

Click here to view on YouTube.

Thank you

Thank you for joining me during this activation and for understanding why I’m keeping the field report portion on the short side! 🙂

I hope you enjoyed the field report and my activation video as much as I enjoyed creating them!

Of course, I’d also like to send a special thanks to those of you who have been supporting the site and channel through Patreon, and the Coffee Fund. While not a requirement, as my content will always be free, I really appreciate the support.

As I mentioned before, the Patreon platform connected to Vimeo makes it possible for me to share videos that are not only 100% ad-free but also downloadable for offline viewing. The Vimeo account also serves as a third backup for my video files.

Thanks for spending part of your day with us! Have a wonderful weekend!

Cheers & 72,
Thomas (K4SWL)

PS: Consider joining our QRPer.net discussion board! It’s an active community of radio operators who enjoy helping and supporting each other. It’s also the best place to ask any questions you might have about radios, field activities, antennas, or pretty much anything amateur radio. Click here to join.

Field Reports, News, Portable, POTA, QRP, QRP Radios, Videos

Index Labs QRP Plus: A Proper POTA Field Test!

13 Comments

Last year, just a few weeks before Hurricane Helene hit our area, I received a large package containing several partial kits and even a couple of transceivers.

The package came from a reader and subscriber who wanted to downsize his radio collection but didn’t want to sell his gear. He refused to let me pay him—even for shipping—seeing it instead as a way to support QRPer.com and my YouTube channel. An incredibly kind gesture!

On Monday, February 10, 2025, I finally took one of those radios to the field: an Index Labs QRP Plus.

As many of you know, I’m quite a fan of this radio. Not only was it one of the first compact general coverage QRP transceivers on the market—back in the mid-1990s—but it’s also a brilliant piece of engineering and ergonomics.

Beyond that, there’s a strong nostalgia factor for me. The QRP Plus was the first QRP radio I ever saw in person… back in 1997.

With an opening in my schedule, I was eager to put this radio on the air. The only POTA site that was convenient based on my travels that day was the Blue Ridge Parkway. Since I was already in east Asheville, the Folk Art Center made for the perfect spot to give the QRP Plus its POTA trial.

I picked a picnic table and then set up the Chelegance MC-750 vertical. In no time, I was ready to hit the air!

Gear:

Note: All Amazon, CW Morse, ABR, Chelegance, eBay, and Radioddity links are affiliate links that support QRPer.com at no cost to you.

Radio

  • Index Labs QRP Plus

Antenna System

Battery

Key and Accessories

Logging

Packs/Cases

Camera and Audio Gear

On The Air

I decided to test the waters first on 15 meters, which had recently been yielding plenty of POTA hunters. Continue reading Index Labs QRP Plus: A Proper POTA Field Test! →

Accessories, Field Reports, Morse Code, News, Portable, POTA, QRP, QRP Radios, Videos

Should It Stay or Go? A POTA Activation with the Ten-Tec Argonaut V

25 Comments

On Wednesday, January 5, 2025, I planned a trip to Hickory to pick up my father and take him to lunch. With our family’s hectic schedule, I hadn’t been able to spend any meaningful time with him in weeks, so I was looking forward to catching up.

Of course, as is tradition, I also planned a POTA activation en route.

That morning, before leaving the house, I debated which park to activate: South Mountains State Park, Tuttle Educational State Forest, or Lake James State Park?

It had been a long time since I’d activated South Mountains, so I considered heading there. However, after checking their website, I was surprised to find the entire park still closed due to damage from Hurricane Helene. I hadn’t realized the storm had impacted the foothills that severely—though with miles of trails, it made sense that they were still working to clear blowdowns.

Next, I checked Tuttle, only to discover it was still closed as well. Wow…

I knew the Catawba River access at Lake James was open because I had activated it a few weeks prior. Sure enough, their site confirmed that the Paddy’s Creek area—the park’s largest section—remained closed. Wow.

Clearly, I had underestimated the damage these parks sustained after Helene.

So, I set my course for Lake James, hoping that, by spring, the other parks would reopen. No doubt, park staff were working hard to make that happen.

Another mission

I had a specific radio in mind for this activation: my TEN-TEC Argonaut V.

I bought this radio used almost four years ago and have been very pleased with it. I’ve always been a big fan of Ten-Tec, and to me, the Argo V embodies the super-simple design I loved from their late 1990s/early 2000s radios. It features a big LED display, a prominent encoder, and a proper fold-out bail underneath—a solid legacy field radio.

What I love most about the Argo V (and Ten-Tec radios in general) is its superb audio, low-noise receiver, and silky-smooth QSK.

The Argo V wasn’t built to be a power miser—the audio amplifier is beefy and a bit current-hungry (I believe it draws around 500mA in receive, and more with audio output). But the tradeoff? Outstanding audio quality. It’s the perfect radio for Field Day or long operating sessions when you want to avoid listener fatigue. It’s also a fantastic shack radio.

That said, because of its bulk—and my tendency to grab smaller radios for field use—the Argo V has primarily lived in my shack.

The Argonaut VI

Last year, I acquired a Ten-Tec Argonaut VI, the last Argonaut model Ten-Tec produced—one I helped beta test back in the day.

When I bought the Argo VI, I told myself I might let go of the Argo V at some point. I’ve been debating this ever since.

Lately, I’ve been actively downsizing my shack. I need to sell, trade, or give away radios I’m not using. I don’t like harboring “shelf queens”—I want my radios to get regular airtime. But since bringing the Argo VI into the shack, the Argo V hasn’t seen much action.

My friend Vlado (N3CZ) and I plan to sell gear at the Charlotte Hamfest in a couple of weeks. I figured this POTA activation might help me decide whether to sell or keep the Argo V.

So, with my Argonaut V and my Tufteln linked 40M EFHW packed, I made my way to Lake James!

Lake James State Park (US-2739)

That morning, Lake James was incredibly quiet. There were very few visitors—even though this was the only section of the park open.

Then again, it was early on a Wednesday morning, not exactly prime time!

I chose a picnic table near the parking lot since I was carrying the Argonaut V and gear in a storage box rather than a backpack.

My high-visibility ABR cable assembly.

I quickly deployed my End-Fed Half-Wave (EFHW) antenna and set up the Argonaut V.

Testing the TouchPaddles

Next, I hooked up my new-to-me TouchPaddles, a generous gift from a kind subscriber/supporter.

These keyers were originally sold as kits and have been discontinued for at least a decade. Though a bit bulky, it’s a fantastic CW accessory!

It uses capacitive touch paddles instead of mechanical parts. The added bulk and weight keep it stable while keying.

The unit also has built-in CW message memory. I haven’t programmed it yet (if you have experience with this model, let me know how!), but I plan to experiment with it soon.

The paddle has two output modes:

  • Standard paddle output (for radios with built-in keyers, like the Argo V).
  • External keying mode (for radios without built-in keyers or those with poor internal keying).

I used the standard paddle output since the Argo V’s internal keyer works brilliantly.

With everything hooked up, it was time to hit the air!

Gear

Note: All Amazon, CW Morse, ABR, Chelegance, eBay, and Radioddity links are affiliate links that support QRPer.com at no cost to you.

Radio

  • TEN-TEC Argonaut V

Antenna system

Key and cable

Logging

Camera

On The Air

Since I was using a 40-meter EFHW, I had access to 40, 20, 15, and 10 meters without needing an ATU.

I started calling CQ POTA on 40 meters. Continue reading Should It Stay or Go? A POTA Activation with the Ten-Tec Argonaut V →

Field Reports, News, Pedestrian Mobile, Portable, POTA, QRP, Videos

Time Crunch: A QRP POTA Activation Challenge and Impromptu Two-Fer!

12 Comments

February has been a whirlwind of a month. Between juggling projects and my daughters’ incredibly busy senior year of high school, free time has been in short supply.

That said, I’ve made it a goal (for the sake of my own sanity—ha!) to squeeze in as much radio time as possible.

Super Portable POTA

Before October 2023, my go-to radio and antenna combo for quick POTA or SOTA activations was the Elecraft KX2 paired with the AX1 or AX2 antenna.

My trusty KX2/AX1 combo!

Even now, I rely on that setup when I want to minimize gear deployment and maximize on-air time. As long as I have a surface to set the radio on—be it a picnic table or my kneeboard–I’m good to go.

But in October 2023, the Elecraft KH1 changed the game. Designed for handheld operation with virtually zero setup time, this radio has made quick activations even more accessible. Given my current busy schedule, the KH1 has been an absolute lifesaver.

It stays packed in my EDC backpack at all times, ready for an impromptu activation or some portable POTA/SOTA hunting.

A Spontaneous Challenge: 45 Minutes to Activate!

Thursday, February 4, 2025, was a perfect example of this radio’s convenience.

My wife and I had a long list of errands, including dropping off donations at various thrift stores and hurricane relief centers. My wife loves thrift shopping (and volunteering), especially when it comes to browsing clothing sections. As we stopped at one of her favorite large thrift stores to drop off donations, she turned to me and said, “I’d like some time here. Could you do a really quick POTA activation and be back in 45 minutes?”

Without hesitation (I do love a challenge), I said, “Heck yeah!”

Mental Math

I quickly mapped out my plan:

  • The nearest POTA entity was the Blue Ridge Parkway (US-3378), about a 5-6 minute drive away.
  • I already had a mental spot in mind where I could park and get on the air fast.
  • Filming the activation would add at least 3-4 minutes for setting up my camera and audio recorder.

Breakdown of the time constraints:

  • Round-trip drive: ~10-12 minutes
  • Camera/Audio setup: ~4 minutes
  • KH1 setup: ~20 seconds
  • Scheduling the activation: ~1 minute
  • Remaining activation time: ~29 minutes

Totally doable—as long as nothing went sideways!

A Two-Fer Bonus!

When I arrived at my planned activation spot, I needed only one thing: a place to park. Since the KH1 is fully handheld, I could operate anywhere.

The red pin is roughly the location where I parked.

I recalled a small pull-off near the Mountains to Sea Trail (US-8313)—a place I’d used before for a quick hike. If the parking spot was close enough to the MST, this might count as a two-fer.

You can see the Mountains to Sea Trail on the left and the short path leading to it from my parked car on the right.

After arriving on site, I confirmed that I was within 20 feet of the MST. POTA rules require that an activator must be within 100 feet (30.5 meters) of a trail for it to count as an activation–obviously, I was well within those limits.

Although I could have operated directly from the trail, the MST is a busy single-track trail, and I didn’t want to block hikers. So, I opted to activate from the parking spot instead.

Next, all I had to do was grab the KH1, set up my camera gear, and hop on the air!

Gear

Note: All Amazon links are affiliate links that support QRPer.com at no cost to you.

Radio and Antenna System

Camera and Audio Gear

On The Air

Knowing that 20 meters would likely be the most productive band, I still wanted to experiment on the higher bands first. I started calling CQ POTA on 15 meters and planned to work my way down through 17 meters before finishing on 20 meters. Continue reading Time Crunch: A QRP POTA Activation Challenge and Impromptu Two-Fer! →

Field Reports, News, Portable, POTA, QRP, Videos

Signs of Recovery: My First Activation at Vance Since Hurricane Helene

6 Comments

On Thursday, January 30, 2025, I did something I hadn’t done in months—I activated the Zebulon B. Vance Birthplace State Historic Site (US-6856).

Regular readers know that western North Carolina was hit hard by Hurricane Helene on September 27, 2024. The Vance Birthplace–nestled in the Reems Creek valley which experienced severe flooding–had been closed for months.

I hadn’t driven out that way post-Helene, assuming the worst. In general, I avoided traveling into affected areas unnecessarily to keep traffic light for those working on recovery efforts.

Recently, another local activator mentioned that the site had reopened. A quick call to the park confirmed that I was welcome to activate, so I packed up my gear and headed out.

Assessing the Site

Upon arrival, I was relieved to see that the site itself hadn’t sustained significant flood damage. There were several downed trees, including a few that hadn’t yet been cleared, but the picnic shelter—the spot I usually operate from—was in great shape. Two large trees had fallen near it, but thankfully, the structure remained unscathed.

For this activation, I opted to use my Chelegance MC-750 self-supporting vertical antenna rather than relying on one of the remaining trees.

Setup

I was so eager to get on the air that I nearly set up the antenna before starting my activation video. Fortunately, I caught myself just in time, grabbed the camera, and recorded the process.

Setting up the MC-750 was simple. I extended the stainless whip to a quarter-wave length on 20 meters, deployed the four counterpoise wires, and connected the feedline to my radio.

I brought my Penntek TR-45L (full-size version) for this activation, and setup was minimal. With its large internal battery, I only needed to ensure the Z-Match tuner was in bypass mode, plug in the antenna and key, and I was ready to go.

Originally, I planned to test a new prototype paddle that had recently arrived. However, the left paddle wasn’t functioning consistently. (After the activation, I discovered a bonding issue between two contact points—mystery solved!) I quickly swapped in my CW Morse double paddle, which I always keep as a backup.

With my logs in place, it was time to hit the air!

Gear:

Note: All Amazon, CW Morse, ABR, Chelegance, eBay, and Radioddity links are affiliate links that support QRPer.com at no cost to you.

Radio

  • Penntek TR-45L with optional Z-Match tuner and internal battery (note: this item has been discontinued)

Antenna System

Key and Cable

Logging

Pack and case

  • Vintage Swiss Army Rucksack
  • FoxPro padded case for the TR-45L (discontinued)

Camera Gear

On The Air

I started calling CQ POTA, and since I had pre-announced the activation, I was auto-spotted via the Reverse Beacon Network. Continue reading Signs of Recovery: My First Activation at Vance Since Hurricane Helene →