Category Archives: POTA

POTA QRP: Testing the new JNCRadio CS-818 ATU with my upgraded Yaesu FT-818ND

I love testing new stuff in the field and on Tuesday, May 2, 2023 I had a great opportunity to test a number of new items.

FT-818ND Upgrades

I mentioned in a previous post that I purchased a new Yaesu FT-818ND from DX Engineering on December 28, 2022. It smacked of an impulse purchase only in that I had not planned to purchase the radio that very day.

Thing is, Yaesu announced they were discontinuing the FT-818 and I always planned to purchase one to replace out one of my two FT-817NDs. I didn’t want to miss the opportunity to buy a new one under warranty, so I bit the bullet on short notice.

Within a few days of purchasing the FT-818ND, I also purchased another 500 kHz CW filter, a WINDCAMP 3000mAh LIPO battery and a WINDCAMP Anderson PowerPole Adapter.

I planned to make the FT-818ND my primary HF radio and use the other FT-817(s) for full duplex satellite work (and HF too, of course, especially since one is now in a TPA-817 pack frame).

I had all of the upgrades in hand by mid-February, but that Yaesu FT-818ND sat in its box under my radio bench until late April. I was so busy evaluating other gear and keeping up with my busy family life,  it had almost slipped my mind. Well, that and I received the incorrect narrow Collins filter from a seller on eBay; instead of sourcing a replacement, I decided to steal an original 500 Hz filter from one of my other radios while waiting on a replacement.

Those narrow Collins filters? They’ve become pure unobtainium over the past couple of months. At one point, eBay was chock full of them. No longer…

It had actually been a very long time since I pulled out a brand new (non-loaner) radio from the box. It’s funny because I remember opening my first FT-817 back in…what…2001? The box and packaging were identical some twenty one years later!

I unboxed then immediately opened the chassis of the FT-818ND to add the Collins filter, attach my Portable Zero side rails (stolen from my FT-817), add the Windcamp battery pack, and add the Windcamp Anderson PP adapter.

JNCRadio CS-818 ATU

Around the same time, Jesse, with Chelegance, also sent me his latest ATU: the CS-818 which is specifically designed to work with the FT-817 and FT-818 series radios. To be clear, Jesse sent the MC-818 at no cost to me to evaluate.

The CS-818 actually works with any radio, but it ships with the command cable for the FT-817/818 for full integration.

The CS-818 can handle up to 30 watts of power, so it’ll pair nicely with any QRP radio. If using it with a QRO radio, you’d have to be very careful not to push more than 30 watts.

NOTE: Due to the frame rate of my camera and the refresh rate of the OLED display, only a portion of the display shows up in my shots.

In truth, ATUs don’t get me terribly excited. I’m quite content with my Elecraft T1 and Emtech ZM-2; these two portable ATUs match anything and everything I use in the field. Continue reading POTA QRP: Testing the new JNCRadio CS-818 ATU with my upgraded Yaesu FT-818ND

My One Day Mini-DXpedition to Switzerland

View from the Swiss Radegg castle over the valley towards Germany

My wife and kids were with her parents for some days, the weather forecast 25° C / 77° F and the following Monday was a public holiday in Germany – perfect condition for an activation day trip during the weekend. With France and the Czech Republic already visited this year, there were two other neighbor countries waiting to be visited: Switzerland and Austria (the one without kangaroos).  Austria is on my schedule for the Ham Radio fair in Friedrichshafen, so it became Switzerland.

The area northwest of the Swiss town Schaffhausen was perfect.

The region has been inhabited for more than 10,000 years.  Schaffhausen started as an independent city-state around 1000 AD and became a Canton later. A canton is a type of administrative division similar to a state, but in European dimensions. The Swiss Confederation, as a whole, is smaller in size compared to West Virginia and has a slightly smaller population than New Jersey. Anyways, in 1330, the town lost all its lands and its independence, but regained its independence back in 1418. Schaffhausen joined the Swiss Confederation as the twelfth member in 1501. In 1944, Schaffhausen experienced a bombing raid by aircrafts from the US Air Forces, which misidentified the town in the neutral Switzerland as their target Ludwigshafen in Nazi-Germany.

The region is not too far from my home, it has a SOTA summit, which is in a POTA and WWFF area, is history-rich and has a second, although German, SOTA summit not too far away.

OpenTopoMap, OpenStreetMap CC-BY-SA, STRM

I started early on that Sunday morning at 8 a.m. The autobahn was nearly empty and just like an invitation to drive a bit faster. Since Corona, I haven’t been using my car very often, so I still had winter tires on, which are limited to 160 kmh / 100 mph.

Since 2008, Switzerland is in the European Schengen Area, so there are no regular border checks. Even before, it was a so-called “Green Border”, i.e. you could often pass it without checks. Without this old, unused border station, you would barely notice that you have crossed the line.

Some minutes later I approached the area, where the first summit is located.

The Wannenberg / Wannebärg (HB/SH-002) is a wooded mountain with an elevation of 661 m / 2168 ft. The peak is rather flat and also wooded. The way from the parking place at the foot of the mountain to the top is rather short and easy, with 2.1 km / 1.3 mi and an ascent of 140 m / 460 ft. Continue reading My One Day Mini-DXpedition to Switzerland

The joy of a low-slung wire

(As is my usual, this article has a bunch of links – click on as many as you wish to receive the full experience)

by Vince (VE6LK)

In May of 2023 I embarked on a two week vacation to Hamilton Ontario that co-incidentally happened to include a side trip to Hamvention just outside of Dayton, Ohio.

For a guy living in Alberta, Canada, this would prove to be quite the trip and it created memories to last a lifetime. I also was told that I could play radio during the trip provided my wife would get to see some of the many waterfalls in the City of Hamilton, the area we’d call home for our two week trip.

At Niagara Falls

Yes, I did take a brief detour to Niagara Falls while on the trip as it is only an hour from Hamilton.

And thus the planning began. I started overlaying POTA entities that overlapped on waterfalls so we both could visit and enjoy in our own way. It also meant I had to figure out what radio gear and, most importantly antennas, to bring along.

I landed up mostly running with low-slung antennas. By this I mean something between 4 and 10′ off the ground and horizontal in orientation. But it’s what I discovered about this simple approach that made it appear like pure magic to me – I made great contacts at what I would consider to be beyond NVIS distances including one from OH to UT!

Continue reading The joy of a low-slung wire

A YL + KX2 = QRP POTA Fun!

A YL + KX2 = QRP POTA Fun

by Teri (KO4WFP)

Last year, I read about Thomas K4SWL’s trip to Canada and plan to activate while there and thought to myself, “Wow! Wouldn’t it be cool to do that one day?” Well, it so happens that my family decided our 2023 summer trip will be to Nova Scotia and immediately I began thinking of how I could work POTA activations into the trip.

Due to time limitations, we are opting to fly which means my Yaesu FT-891 will not work. As much as I have come to enjoy using this radio, it is too bulky and heavy for airplane travel. So I started looking into QRP setups.

I chose the Elecraft KX2 and AX1. Whenever I mentioned to someone I had ordered the KX2, the immediate response was “You’ll love it!” I wasn’t sure it would arrive before the trip, though, given Elecraft’s order fulfillment estimation of 12 to 16 weeks. (Yikes!) Thankfully, the rig and antenna arrived early May giving me six weeks to familiarize myself with the rig and antenna before my summer trip.

So this past Wednesday May 17th, the KX2 and I headed to Wormsloe State Historic Site (K-3725) for my first POTA QRP activation. Quirky note: I’ve actually named the KX2 “Craig”. I figure it and I will be spending lots of time with each other so we might as well be on a first-name basis! Continue reading A YL + KX2 = QRP POTA Fun!

Pit Stop Style Activation with Elecraft KX3 and AX1

(As is my usual, this article has a bunch of links – click on as many as you wish to receive the full experience)

by Vince (VE6LK)

In May of 2023 I embarked on a two week vacation to Hamilton Ontario, the city of Waterfalls. And I found myself with a spare 30 minutes so I decided to squeeze in an activation.

And as I am an opportunist, I made this decision at 23:25’ish z and I had not yet arrived at the park but the target was only a few minutes away! I would have until 23:59:59z to complete it if I were to be successful. “It’s time to break out the Elecraft AX1 antenna I bought at Hamvention last week I think to myself. It would be my first time using the antenna. I had pre-read the instructions and knew what had to be done in order to set it up.

The whole thing would unfold like a Formula 1 pit stop, albeit a wee bit slower <grin>.

Battlefield House

I arrived at VE-5351, The Battle of Stoney Creek National Historic Site and began to scout a location. Pausing only long enough to snap a few photos, I parked and immediately got to work. Continue reading Pit Stop Style Activation with Elecraft KX3 and AX1

Rainy Day POTA: Setting up the Chelegance MC-750 Vertical Antenna Inside a Picnic Shelter?

On Thursday, April 27, 2023, it was pouring rain, so the perfect time for a little POTA, right–?

Right!

Actually, I had an idea: in the past, I’ve been known to play POTA under the roof of a picnic shelter on rainy days. I’ve even been known to use my AX1 antenna inside the shelter, under a metal roof. Quite a few times, actually.

Of course, it’s not optimal to operate with your antenna under a metal roof, but with POTA? Let’s just say that you can get away with a lot of less-than-optimal antenna deployments.

That’s the benefit of being the DX!

The MC-750 Tripod

An in-the-shelter activation was also the perfect opportunity to test the new Chelegance tripod that fits both the MC-750 and the JPC-12.

A number of readers have reached out asking about this tripod, so when Jesse at Chelegance asked if I’d like to test it, I agreed to do so.

To be clear, he sent this to me at no cost for evaluation. It’s actually quite affordable ($30 on the Chelegance website, $40 at DX Engineering, for example) so purchasing it would have been easy enough, but Jesse also wanted me to evaluate their new FT-818 ATU, so he sent both at the same time (you’ll see the ATU in a future field report).

The tripod feels very sturdy and is simple to deploy. It’s also a little heavy, so keep that in mind if you plan to pack it in for a long SOTA hike.

A number of you have purchased this tripod and have only had positive comments. I now see why.

I speak about this in more detail in the activation video below.

Lake Norman State Park (K-2740)

I decided that it had been too long since I had activated Lake Norman State Park, so I hopped in the car and headed to Troutman, NC! Lake Norman has a number of picnic shelters and covered areas thus a very safe bet.

It was a rainy day so, of course, I pulled into the Lake Norman picnic area only to find one other car there. In fact, by the time I had taken my backpack to the picnic shelter, that other park visitor appeared at a trailhead, hopped in her car, and left.

The picnic shelter sign wasn’t set to “reserved” either, so it looked like I had a green light to claim it for POTA! Continue reading Rainy Day POTA: Setting up the Chelegance MC-750 Vertical Antenna Inside a Picnic Shelter?

Postcard Field Report: Pairing the Elecraft KX2 and MM0OPX EFHW to face dubious propagation

Welcome to another Postcard Field Report!

I’m still in Dayton after Hamvention weekend, but didn’t want to skip my field report and activation video, so a hope you enjoy the slightly shorter report below:

Zebulon Vance Historic Birthplace (K-6856)

On Tuesday, April 25, 2023, I once again stopped by my weekly POTA spot, the Vance Birthplace.  By mid-May, I will no longer be passing by this excellent little POTA site on a weekly basis, so my activations here will be much less frequent. A shame because I do love this site and its staff!

For this particular activation, I’d planned to test my almost perfectly trimmed QRPguys Tunable EFHW antenna, but I left it at home. Not a problem, actually, because after this activation, I discovered it’s not as resonant as I’d like on the 20, 15, and 10 meter bands, so I may tinker with the toroid windings a bit–perhaps removing one.

Instead, I deployed my MM0OPX EFHW which I thought was actually a great choice considering propagation had been incredibly unstable the previous few days.

Since I also had my Elecraft KX2, I knew I could use its built-in ATU to move to non-resonant bands like 17 and 30 meters.

This activation video is a long one because I had quite a lot of time to play radio and, frankly, it was nice taking things at a casual pace.

After deploying the antenna (twice!) I set up the radio, connected my Begali Traveler, and hopped on the air! Continue reading Postcard Field Report: Pairing the Elecraft KX2 and MM0OPX EFHW to face dubious propagation

Lakefront QRP and Bags Galore!

by Vince (VE6LK)

(As is my usual, this article is full of hyperlinks – click on as many as you wish)

The days leading up to my first Hamvention trip were a bit scattered to say the least. While I was pretty sure I remembered everything and even documented most of my gear on Twitter, I would only discover that the bag I intended to carry my gear around in was too small once I arrived in VE3-land. The very next morning I was shopping in several big box stores trying to find the perfect bag only, hours later, to discover an Army Surplus Store across the street from my activation and after the activation concluded.

Holey Moley lookit all the molle and backpacks!
Thomas’ reaction upon seeing this photo was predictable 😉

Anyways, the short summary on the shopping trip was that I figured out a way to get me through the trip without spending a fortune.

The day’s goals were to make a simple activation at a park near the family where we were visiting east of Toronto. Before travelling I scoped out POTA entities that were nearby and had not yet received a CW Activation thus putting me closer to my CW goal for the year.

I landed up at Lakefront West Park VE-1480 in Oshawa Ontario.  A recreational trail winds along the waterfront of Lake Ontario about 100m away, and eight baseball diamonds are the central feature here. Given the lack of trees at the park, and that I do not have a small mast on this trip for my EFHW -although I may remedy that at Hamvention- I chose to deploy my Comet HFJ-350M with some simple ground radials. With the solar reports showing SFI 149, SSN 134, A 19 and K 2, I chose 20m as the band for the day. 5W on my KX3 into a ground mounted vertical with one each 66′ and 33′ radial wires would have to be enough.

DX Toolbox on iOS – click for App Store link

I have the full Comet HFJ-350M kit including the bag to carry all the pieces in. I also have a ground stake from eBay that comes with a 90 degree SO-239 adapter allowing me to attach feedline on the side and the antenna on the top. Not including the ground radials, the whole kit rolls up reasonably small, about 3″ in diameter and 12″ long. Continue reading Lakefront QRP and Bags Galore!

Postcard Field Report: Pairing the Elecraft KX2 and Packtenna 9:1 Random Wire at Holmes Educational State Forest

Well, I’m off to Hamvention in two days and trying to prepare for the trip. There’s so much to do!

If you are attending Hamvention this year, I’d love to meet you. Stop by the Ham Radio Workbench/Halibut Electronics table (#3011) and introduce yourself.

Since my travels this week are imposing on my field report time, I’m going to share another, shorter, Postcard Field Report. I hope you enjoy it:

Holmes Educational State Forest (K-4856)

On Friday, April 21, 2023, I had a short window of time to fit in an activation while my daughter was attending her high school robotics class.

Her robotics class lasts nearly two hours, but it’s 30 minutes away from all parks and summits, so traveling to/from a site takes about one hour.

I didn’t care because I had a particular park in mind: Holmes Educational State Forest (K-4856).

It had been one year almost to the day since I last activated Holmes.

I arrived on site around 13:30 local, and there were only a few other people floating about.

I walked up the main loop path in search of a good picnic table that was out of the way and with ample trees about.

In a pinch, any of the picnic table sites would have sufficed, but since I practically had the whole park to myself, I could afford to be picky!

The sign above reminds me that Educational State Forests in North Carolina have hours that vary by season and truly cater to school groups, thus are primarily open during the school day. Always check those hours before embarking on a journey to this type of park.

One great thing about our Educational State Forests is that they almost always have a nice covered picnic shelter for school groups. If they’re not occupied, they’re perfect for POTA activators who’d like to escape heavy rains. You can see the one at Holmes off in the distance in this photo:

I ended up choosing the same picnic table I used last time–it had more room around it to set up an antenna without crossing the path.

I didn’t have a lot of time to set up and operate, so I chose to use one of my speedier deployment combos: the Elecraft KX2 and PackTenna 9:1 Random Wire. Continue reading Postcard Field Report: Pairing the Elecraft KX2 and Packtenna 9:1 Random Wire at Holmes Educational State Forest

Postcard Field Report: Pairing my new-to-me Palm Pico with the TX-500 at K-6856!

I finally snagged one.

In the world of lightweight, super-compact QRP radio kits, there is one key that is, essentially, a legend: the venerable Palm Pico.

The Palm Pico has a stellar reputation because it’s super lightweight, can retract into its housing to protect it in transport, and can be directly attached to various radios with a specific mounting assembly or via Velcro or magnets.

The Palm Pico has been out of production for some time now and, they’re so highly desired, they often fetch the original purchase price or even higher on the used market. Truth is, so few Pico owners are willing to sell that very few of these keys ever enter the used market.

I was very lucky, indeed, when a long-time Patreon supporter reached out and offered to sell me her Palm Pico and Palm Mini paddles along with a KX2 mounting assembly. She had noticed how my eyes lit up when Josh (KI6NAZ) showed me his Palm Pico paddle on an HRCC Livestream in February.

The price she offered was amazingly low. She told me that she favored some of the other keys in her collection and wanted to give me the opportunity to own them. They were like-new with all original boxes and accessories.

How could I resist? I’m so grateful.

I really look forward to using the Palm Pico and Palm Mini this year. I’m especially eager to hook up the Palm Pico directly to the KX2 with its custom mounting bracket.

I decided to take my Palm Pico on a maiden POTA activation at the Vance Birthplace on April 18, 2023.

Postcard Field Report

I’ve got a load of videos in the pipeline and to keep from falling behind publishing them, you’re going to see more of my slightly shorter “Postcard Field Reports” for the next couple of weeks during my travels.

These postcard reports contain all of the core information, just less wordy.  (In theory!)

Zebulon Vance Historic Birthplace (K-6856)

I arrived at the Vance Birthplace and checked in quickly with the park staff. There were no picnic shelter reservations that day but there was a family with children eating a picnic lunch when I arrived. Continue reading Postcard Field Report: Pairing my new-to-me Palm Pico with the TX-500 at K-6856!