Many thanks to my friend Ollie–an SWL in Germany–who shares the following guest post:
German spies are eavesdropping on you!
I recently made the first all-night listening sessions at the German North Sea coast for this year. On the night of June 10th/11th I picked up 2 POTA SSB activations over here and I thought you guys might find it mildly interesting what that sounds like here. 🙂 Condx were just going down from “slightly elevated” to “regular solar minimum” values that evening.
RX was an Icom IC-705, antenna is a 10m/33′ lazy monopole (running 10m wire vertically up a fiberglass pole, no counterpoise, no matching network, balun, flux capacitor, just a wire and pretty conductive ground).
Video: KI5OLV activating K6574 (Lower Neches Wildlife Management Area, TX), around 1:40 UTC
Video: W8CFS activating K-1552 (Warren Dunes State Park, MI), around 23:00 UTC, condx to the stateside were dipping at that time
I don’t know that W8CFS had brought to his park, KI5OLV brought an IC-7100 and was running its 100W into a hamstick antenna on his truck. Nothing to learn from that really, I’m just happy I can hear y’all! 🙂
A few weeks ago–out of the blue–I received a QRPver Minion SDR operator’s manual in the mail. From the return address, I couldn’t determine why I would have received it–in fact, I assumed it was sent to me in error.
Still, I read through the manual because I came very close to purchasing one last year. I had seen the Minion SDR transceiver on Gil Grusome’s channel Radio Prepper.
A few days later, I received a USPS Priority Mail box in the post. Again, scratching my head, I opened it to find a QRPer Minion SDR transceiver inside! Woah!
The fellow who sent it included a kind note saying that he wanted this to be considered a contribution to my work here on QRPer and YouTube. He noted some of the Minion’s shortcomings (which Gil had also pointed out) including how sensitive it is to any RF coming back from an antenna. I’ll need to build an RF choke for sure.
I could tell from his note that he’d rather remain anonymous, so I respect that.
Thank you so much for passing the Minion along! I look forward to putting it on the air! It is an incredibly tiny radio–much smaller than I had even imagined.
I’ll need to take it to my buddy Vlado for a minor repair up front. Somehow, when I plugged a speaker into the audio jack, I broke it off the circuit board. It can easily be fixed by Vlado with a little outpatient surgery. 🙂
Thank you again to the kind subscriber/reader for passing along his Minion. I’ll put it to work!
I told Thomas I would do my own field test of the Xiegu X5105 doing a couple of Parks on the Air activations and what I thought of the radio.
I have had several radios I’ve used on POTA and SOTA activations over the past year and without a doubt my favorite radio for out in the field is my ICOM IC-705. It has everything I want in a portable radio, however I’m also enjoying it alongside my ICOM IC-7300 in the shack. Therefore I’ve looked at other portable radios for field use.
My latest acquisition was a used Xiegu X5105 that I purchased used on QRZ. The radio works fine and for the most part the menu system with it is very easy to understand. As Thomas has pointed out, the CW memory is absolutely insane to use. It just makes no sense to me why with the 10 memory slots that it’s really impractical to use more than the memory in Slot 1, which for me is the CQ POTA. I would never even have known how to set it up in the first place without instructions to Tom that was shared in Tom’s post regarding the X5105.
I got the radio on June 3, played around with it in the shack to get familiar with it and programmed in the memories. I went to K-5481 (Wm. Penn State Forest), which has several parts scattered around eastern Pennsylvania. It has a very small 10 acre tract in the Cornwall mountains between Lancaster and Lebanon County, which is also at a SOTA summit. I used my Sotabeams EMCOMM III antenna and turned on the radio to start calling CQ POTA. For the life of me I could not get the CQ message to send, so I gave up on that and used my CW Morse paddle and did it the old fashioned way. I also spotted myself on the cluster and made 3 QSO’s on 40 meters fairly quickly. I had success on 30 and 17 meters as well. In total, there were 10 QSO’s made in about 45 minutes.
Other than my disappointment not being able to easily send the CQ from memory, overall I was pleased with the activation. When I got home I investigated again how to send CW. I also learned how to use the DSP to make it more narrow on CW, which I was thankful for. I then started to see if I could go hands free using my Heil headset that I was able to use when I had the G90. Unfortunately that did not work at all using the AD-1-iCM adapter as it would not transmit with the foot pedal. I did use the Heil headset in the side jack and put the radio in headset mode. I was disappointed to find that I had to increase the volume up the whole way to be able to hear CW loud enough for my old ears. When I unplugged the headset suddenly the radio RX was very loud. (If anyone can offer a solution, please let me know).
Today I took it to my local POTA park near my house, K-1418 (Samuel Lewis State Park). I used the same Sotabeams antenna and was on the air in no time. Band conditions were not so good and I ended up with 18 QSO in just over an hour. It was nice having the CQ function working, however I am used to the interval where it would automatically send every 7 seconds like the IC 705 does. Not a big deal, I just had to press the PTT button on the top.
I never tried using the radio on SSB before so I called unsuccessfully on 20 meters and went to 40 where KM4JEG called me and gave me a 55. Sadly, I had to take my headset off because when I keyed the mic I was hearing my distorted voice through the headset. So, headset was removed. I didn’t expect that was going to happen, so now on SSB, I’m not able to use the headset, at least on TX.
The Good:
I really like the internal battery in the radio. I did not have to bring the Bioenno 12v 3aH battery along. The internal battery works great!
It is very portable. I watched a YouTube video, and unfortunately I cannot find who it was, but they had an Osprey UltraLight Roll Organizer which I purchased on Amazon. This is perfect for storing the X5105 and the few accessories it needs, in my car so I’m always going to have a portable radio available when I travel.
The ATU is great on the radio. I can tune all the bands I want to work with the Sotabeams antenna. This also saves having an extra wire and external ATU like I would have to use on the IC 705 with this type of antenna.
The radio is nice and portable and will store nice in my car when not in use and will be ready to go.
The Bad:
The CW presets are almost worthless and not easy to get to. Once I found how to send from the memories, it only really makes sense to use one of the memory slots. I wouldn’t easily be able to switch to a 73 menu shortcut, then go back to the CQ memory.
With the headset plugged in, when I was transmitting CW, I could hear some distortion while it was sending, however it was not too bad, but something I’m not used to hearing.
The Ugly:
The headset for SSB could not be used at all due to the distorted noise it made. Also, the volume for the headset and the volume through the radio are night and day. As I mentioned before, when I unhooked the headset and the audio came out of the radio again, I had to quickly adjust the volume down.
My Opinion:
Overall, my opinion of the radio is this: For the price and the features it has, I would say it’s a good field radio, as it is easy to store in the car, it has the built in ATU if being used on a random wire antenna, and for 5 watts, people had no problems hearing me, even with poor band conditions and QSB. I hope this radio grows on me, and in the back of my mind don’t find myself thinking during the activation, gee I miss my IC-705 out here.
I know comparing the X5105 to the IC-705 is like comparing apples to oranges. Each radio has it’s good and bad. For the price difference, the Xiegu definitely is worth the price. I would never use it as a first HF radio in the hamshack if I were a new ham. This radio is also not going to be used by me on digital modes. If I want to do digital or work a contest while doing a POTA, then there is no doubt the 705 is coming along for the activation. The Xiegu will be used by me when I want to use a random wire antenna since it has the built in ATU, along with the fact it will be light in the backpack if I am hiking to a summit, and the IC 705 will be used with one of my end-fed half wave antennas or the Hustler vertical array so I don’t need the mAT-705 which I’ll use in the hamshack. I’m trying my best to get away from wires all over the place when I activate, so the laptop computer is staying home. I really like the HAMRS logging program, which I highly recommend, on my Android Samsung S-20.
If anyone who reads this who has some insight into some of the issues I mention, please reply so I have a better understanding of this radio.
73!
Scott KN3A
Scott Lithgow (KN3A) is a contributor on QRPer.com. Click here to check out his previous posts.
Many thanks to a number of QRPer readers who note that WA3RNC has recently introduced the TR-25 CW Transceiver Kit and announced the upcoming TR-45L QRP Transceiver Kit.
Here is a compact but powerful 2-band CW transceiver kit that uses no tiny pushbuttons, and without those seemingly endless and hard-to-remember back menus. There is a knob or a switch for every function!
Size 5 ½ X 3 ¼ X 1 ½ less protrusions, weight 10.6 Oz
Full band coverage of 40 and 20 meters
About 10 watts output with a 14 volt power supply
5 Watts minimum output with a 10 volt supply
4 Watts output with an 9 volt supply
Optimized for operation from 3 series-connected 18650 Lithium cells
RIT tunes + and – 5KHz
Blue OLED display reads frequency to 10 Hz and RIT offset
Built in Iambic keyer is adjustable 5 to 35 WPM with front panel control
Separate jacks for straight key and paddles; Always ready for SKCC contacts
Operates on 9 to 14 volts, < 90ma receive, about 1 Amp Xmitt at 10 volts
Selectable tuning resolution steps of 10, 100, and 1000Hz
Low battery indicator with internal adjustment 9 to 12 volts
Front panel adjustable RF gain control
Front panel TX power control; Adjustable from 0 to 10 watts (@14V)
Rugged TO-220 FET RF amp can deliver 5 Watts key down for 5 minutes
Signal quality blue LED, RIT warning orange LED, Low battery red LED
More than enough audio to fill any room with an external speaker
Excellent receiver sensitivity with MDS of -132dBm (0.06 microvolt)
Very effective receive AGC prevents ear damage with strong signals
Transmitter harmonics and spurs -58dB, meets FCC specs
CW sidetone is the actual transmitter signal as heard by receiver
Match the received signal tone to the sidetone for perfect zero beating
Sharp IF filter; Better than 300 Hz at the -6dB point, plus 700 Hz audio filter
Over 200 machine placed SMT parts, and about 55 user installed parts
All critical circuits are factory pre-aligned and calibrated
No endless “back menus”; There is a control or switch for every function
Options include pre-wound toroid coils, precision optical tuning encoder, and complete factory assembly
Price is $250 or you can add pre-wound toroids for $18, a precision optical encoder for $30, or for $310 you can purchase this kit fully assembled and tested. Click here to check it out.
TR-45L is a 4-band 5-watt CW transceiver covering the 80-75, 40, 30, and 20 meter bands.
Full band coverage is provided, with the transmitter optimized for the CW band portions.
The receiver is provided with both narrow and wide band IF filters, and CW and SSB detectors.
An illuminated front panel meter shows “S” units on receive, and power output (forward or reverse) while transmitting. The meter also will display the battery state of charge.
A “High SWR” warning indicator will illuminate if the antenna SWR exceeds about 2:1.
The transmitter power output is adjustable from less than ½ watt to 5 watts with a front panel control.
RIT is provided to adjust the receive frequency up to + or – 5 KHz from the transmit frequency.
Two VFOs for each band are provided with recallable memories.
A built-in keyer is adjustable from about 5 wpm to 35 wpm with a front panel speed control.
Separate straight key and keyer paddle inputs are provided on the front panel.
A front panel adjustable sharp notch filter is provided to null out interference.
A front panel receiver RF gain control is provided.
Operates from a 12 volt nominal power source requiring up to 1.3 amperes on transmit, and about 130 ma on receive. A front panel power on – off switch is provided.
Tuning speed is easily settable from 1 Hz to 1 KHz per step.
A selectable dial lock is available to prevent inadvertent frequency changes.
There is a knob or switch for every function – no confusing back menus!
Size 8-1/2” wide, 5” high, 3” deep Weight about 2.8 lb with Internal Batteries
Beta testing is continuing…73 de WA3RNC
No pricing or availability has been noted yet.
I life the look of both of these kits. I love the fact that you can buy pre-wound toroids as this is often one of the more complicated parts when building radios. Also, I’m pleased to see that all SMD components are pre-installed and that all critical circuits are factory pre-aligned and calibrated. That will make this kit accessible to a much larger kit building audience.
If you live here in the States and like to play radio in the field, I highly recommend one of the DeLorme Atlas & Gazetteer issues.
Although I use electronic devices like smart phones and dedicated GPS, it’s always nice to have a paper map. I always have one of these Gazetteers in my car. You should never be without a paper map, I say.
I love the Gazetteer because it shows lines of elevation and every/any possible road and trail. It’s incredibly useful for finding summit road and trail access points and also for finding game land entry areas.
Funny, but I opened my new Gazetteer while still in the parking lot of the camping store and almost instantly spotted a brilliant new access point for the Overland Victory trail in Morganton. It’s an even better activation spot than I’ve used in the past.
Last year, I wanted to purchase the latest edition for North Carolina but I’m sure due to the pandemic, they were as rare as hens teeth!
The other week, I found one in a local camping store and grabbed it! The store owner told me he’d only gotten a handful in recently and had been out for months. Check for one at your local camping store, book store or outdoor center. If you can’t find one there, check Amazom.com (affiliate link).
I’m a huge map geek. Although I don’t recall them including topographic information, when I lived in the UK, I was a massive fan of A to Z road maps for their design. I’d love to know if there’s a topo map equivalent.
If you live outside the US, I’d love to know what maps you use for your field activities! Please comment!
Last time I visited Table Rock Fish Hatchery–this activation–it was a struggle to get the ten contacts I needed for a valid activation. Propagation was horrible that day, making it a proper struggle.
On Thursday, May 20, 2021, I thought I’d go back to the fish hatchery for another try! I really like the site: it’s open, has lots of trees, and the staff (and neighborhood dogs) are all very friendly.
My not-so-QRP diesel truck!
Thing is, as I drove to Table Rock, my buddy Mike informed me that propagation took a nose dive. Earlier in the day, it had been reasonably stable, but he noted that POTA activators were struggling in the afternoon and the propagation numbers were in the dumps.
There’s a beautiful little creek next to the picnic area.
My secret weapon: The Chameleon CHA LEFS
Shortly after I posted my “unboxing” video of the lab599 Discovery TX-500, Carl at Chameleon Antenna made a comment on my YouTube channel that he was going to send me their CHA LEFS (Lightweight End Fed Sloper) wire antenna since it’s resonant on 40, 20, 17, 15, 12 and 10 meters. In many ways, it’s ideally suited to pair with the TX-500 since this transceiver lacks an internal ATU. Side note: there is a cool project in the works called the DIY599 that adds a 60 watt amp and ATU to the TX-500 .
I had only recently received the CHA LEFS and had not yet taken it to the field. Table Rock was the perfect opportunity.
When I know in advance that propagation is poor, I try to make my portable set up as efficient as possible, so that’s when I 1.) make sure I pull out a resonant wire antenna and 2.) use a wire antenna with longer radiators. The CHA LEFS fits both of these bills.
The CHA LEFS has a 63 foot radiator made of 20 gauge PTFE antenna KEVLAR wire. The winder has a large efficient transformer to match impedance, and there is an inline coil to make the most of the 63′ radiator. They also include 50′ of Micro 90 paracord.
Like all Chameleon antennas I’ve used, it’s built to military specs.
Table Rock Fish Hatchery (K-8012)
Table Rock is ideally-suited for a long-ish sloping wire antenna, too. The site has tall trees and open spaces that make stretching out the sloping radiator quite easy. Just watch those power lines!
The CHA LEFS takes longer to deploy that end-fed antennas with a feedpoint near the ground. I find it quicker to deploy, however, than dipoles.
I deployed the LEFS by first stretching out its radiator wire in the direction I planned to deploy it.
Next, I connected the coax feedline to the SO-239 on the LEFS winder and stretched it in the opposite direction of the radiator. Why do this? It helps keep the radiator and coax from twisting together as I raise the winder/feedpoint into the tree.
This is not a difficult antenna to deploy as one person. Of course, if you have a helper, it’ll go even faster (I’ve yet to convince Hazel to help me with antenna deployment).
I had launched the arborist line quite high into a tree at the picnic table where I planned to operate. I was able to elevate the LEFS feedpoint/winder about 47′ into the tree.
I used the supplied paracord to attach the radiator to a nearby branch. The end of the sloper was perhaps 6 feet off the ground (if memory serves).
Knowing how poor conditions were from real-life K8RAT observations, I didn’t expect to actually validate my activation by logging the required 10 contacts. As I stated in my activation video, I was fully prepared to walk away with three or four contacts–I didn’t have a few hours to burn on an activation. I was simply happy to play with a new antenna, the TX-500, hang with the local canine welcome committee and enjoy the fine weather.
First, I hopped on 40 meters and discovered the LEFS provided a perfect 1:1 match on 7063 kHz. Very promising!
Next, I started calling CQ and the Reverse Beacon Network functionality of the POTA spots page must have quickly auto-spotted me.
Within 13 minutes, I logged six contacts! I was impressed. Mike (K8RAT) was in that first six contacts and he later told me it was one of the strongest signals he’d ever heard from me at a POTA activation. He asked what I was using as an antenna that day and said, “it was working!”
Next, I moved to the 30 meter band and worked K8RAT again (a rarity on 30 meters!) along with four other stations.
I ran out of time, so called it quits with 11 stations logged.
I did not expect to not only walk away with a valid activation, but to have completed it in such short order.
QSO Map
Here’s the QSO Map of my contacts all made with 5 watts of power:
As Carl suggested, I’m going to keep the CHA LEFS tucked away along with my PackTenna EFHW in the Discovery TX-500 pack.
When conditions are poor, I’ll spend the modest amount of extra time deploying this fine antenna.
The only CHA LEFS criticism I noted–and it’s a minor one–is that the in-line trap/coil isn’t very low-profile and takes a little attention to make it fall in the right spot when reeling the antenna up post-activation. Seriously. A minor criticism and I’m guessing Chameleon has a reason for it being on the large size–likely for power handling reasons.
Field Day is coming up, and I think I’m going to make the CHA LEFS one of Team Baklava‘s main antennas (Team Baklava = my buddy N3CZ and me!).
I would like to thank everyone for their positive and kind comments from my first part of the SOTA adventure with NK8Q. I have a slight correction to make, Cole Mountain was the first summit we did on Day 2. As you can see below in the pictures, there were no trees to hang our EFHW antennas, so we brought along our fishing poles. This generated a lot of interest from the A.T. thru hikers asking what we were doing. On particular hiker told us he’s seen others doing SOTA at summits throughout his journey from Georgia until that day. This was a fairly steep climb to get to, but the scenery was fantastic and well worth the walk. We offered trail magic to several of the hikers and we had very good conversation with them all.
Heading back down from the summit are a couple of other views we saw. There were some trees outside of the activation zone.
We packed up and started heading down the mountain to the parking lot around noon with the next destination Rocky Mountain (W4V/BR-001).
We drove almost 3 hours to get to this drive-up summit. The “S” turns and elevation changes were worth it though as there was so many spectacular views of the mountains. The last 4 or 5 miles was up a very steep gravel road that had me white knuckling until we got to the top. This was a site with several towers for different things and not a lot of view. I was able to get 10 QSO’s at the summit. I recall it was getting very warm that afternoon and I was not looking forward to the drive back down the mountain on the access road. I figured out how to do the manual shifting in my Tucson and Mark followed me down the hill. It was a non-issue and then we had a long drive to where we thought we would be able to camp on Skyline Drive.
I got my 4 SOTA QSO’s, time to relax.
When we finally got back onto paved roads and eventually into cell phone coverage briefly; we were hoping to find a place to get ice for the coolers and maybe a place to eat. Well, we found a gas station in the middle of nowhere with ice and a little store and they happened to be selling their own fried chicken and fries. When we got to the south end of Skyline Drive entrance, the sign showed all of the campgrounds were full. Since it was already getting dark, we made the decision to get on I-81 and head north and found a Super 8 Motel in Newmarket, VA for the night with the plan to get back to Skyline Drive at the Thornton Gap entrance. We got up early and looked for a gas station and a place to eat. Conveniently, Dunkin Donuts has a gas station as well (we didn’t realize that until after we got gas) but had a good breakfast sandwich each and I got a large coffee. I believe Mark is only the second person I’ve ever known who does not drink coffee. I believe my large cup was consumed before we got to Skyline Drive that morning, which I believe was about 18 miles.
First Summit of the day was Hazeltop Mountain (W4V/SH-004), which was south on Skyline Drive. The scenic outlooks were beautiful on the way to the summit.
Once we reached the summit, there was not much to see. I set up a few yards off the A.T. and made 15 contacts. The band conditions were pretty decent. This was my set up at this location.
Next stop – Hawksbill Mountain (W4V/SH-001). It was just after 12 noon when we got to the parking area, and there was a good mile or so of steep uphill climbing. The reward at the top was worth the climb! I got another 20 QSO’s in the logbook at this summit.
This dial pointed to the many summits within view of Upper Hawksbill.
Final summit for the day was Stony Man Mountain (W4V/SH-002). This was another steep climb, but the reward was also a beautiful view. I made 8 QSO’s and Mark and I shared the antenna and radio due to the limited space and all the people walking around at the summit.
I will continue with Part 3 of our journey to the Summits in Virginia in the next post. I hope I have half the writing skills that Tom Witherspoon has and that I was able to hold your interest in the SOTA journey that Mark and I did. I will wrap up the story with a Part 3. Thank you for taking the time to read this.
Scott Lithgow
KN3A
Scott Lithgow (KN3A) is a contributor on QRPer.com. Click here to check out his previous posts.
I just got back from an activation at Lake Jame State Park where I used the Xiegu X5105. Radioddity sent this radio on loan at my request for an upcoming review in The Spectrum Monitor magazine.
I must say that I underestimated this little radio…
Impressive play on the internal battery
I’ve now completed 3 activations with the X5105 on one battery charge made three weeks ago!
This weekend, I used the X5105 in the shack for perhaps 30-40 minutes chasing a few parks and summits on that same charge. During that weekend time it was mostly in receive mode, unlike when I’m activating (and working stations or constantly calling CW).
I decided to see how long it would continue to play off of the internal battery, so I didn’t re-charge it. Instead, today (June 7), I took it to Lake Norman State Park and had an external battery at the ready if it failed mid-activation.
It didn’t fail, though, even after 1.5 hours on the air. The voltage, when I finally gave up, was about 10.2 volts. I ran out of time, not the battery.
I’m impressed.
Internal Microphone
Once I’ve uploaded the video and written the field report (in a week or two), you’ll see that at one point today, I switched to SSB operation. Thing is: I didn’t bring the X5105 hand mic with me–it was 2 hours away at the QTH!
I remembered that the X5105 has a built-in mic–meaning, built into the body–so I decided to give it a go. I mean why not–?
Turns out, it was very easy to operate: simply press the PTT button as you would a mic button and speak. I worked a few SSB contacts this way.
The only other radio I own with an internal mic is the Elecraft KX2.
This X5105 might become permanent
Herein lies the trouble with doing radio reviews: sometimes you get attached. I need to talk with Radioddity.
I’ve been hesitant to take this unit on a SOTA activation because the chances of it getting scratched, etc. increases.
I believe I’m going to add the X5105 to my HF radio arsenal. It’s a fun little radio and it would make the short list for SOTA runs along with the Elecraft KX2 and Discovery TX-500.
Ed operated as FP0AR–one of his favorite family DXpeditions– more than four decades ago.
This past week has been a crazy one.
I set the week aside to catch up on a number of projects and to fit in at least one activation. I did manage that activation on Tuesday–Hazel and I hit the trails and I activated Mount Pisgah.
Wednesday, however, was a different story…
At midday, I received a call from the daughter of a dear ham radio friend telling me that her father–and my friend–was unresponsive and now under hospice care. She didn’t expect him to live much longer, and wanted to know if Vlado (N3CZ) and I could come over to spend a little time at his bedside. A quick call to Vlado, and we instantly dropped everything we were doing; I picked up Vlado at his QTH and we drove the two hours to be with Ed (W2HTI), his wife Eileen (KO4DI), and their children and grandchildren.
It was sad, of course, but Ed indicated that he recognized us and even attempted to communicate as best he could. Needless to say, we were deeply touched and so glad we’d made the trip, even on the long drive home.
Ed (W2HTI) SK
Early Friday morning, only 32 hours later, Ed went silent key.
The good news: Ed was pushing 91 and had led a very rich, full life. I’m not sure I’ve ever known anyone with the energy level, love of life, and amazing talent to make everyone laugh. This Brooklyn “boy” and his wife, Eileen, were/are also some of the most generous people I’ve known, and have gone out of their way to treat me and Vlado and our families–and indeed, many DXers over the years– like their own family.
Ed lived at least five full lifetimes, all of them full of adventure with an amazing family.
And did I mention, he was an avid DXer…?
A small request
Ed (W2HTI) on the left and Vlado (N3CZ) on the right during one of our visits in 2019.
You might have guessed that ham radio played a central role in Ed’s life–and still does, for his wife Eileen. It’s no exaggeration to say, Ed was one of the top radio DXers in the world. Ed also collected QSLs, and his family counts these among his precious possessions, and are making sure they are carefully archived.
Our special request: For this QSL collecter, there’s no better memorial than QSL cards. If you have a moment, please consider sending his wife, Eileen a QSL card in memory of this incredible member of the radio community. Even if you didn’t know Ed, it would mean a lot, coming from the ham radio world that was such an inspiration to him and his family, to be acknowledged. Vlado and I are asking this of all the hams we know. Thank you, friends.
Eileen’s contact information can be found on her QRZ.com page. If you don’t have access to QRZ.com and need her address, simply email me and I’d be happy to provide it.
QRP radios, product announcements, reviews, news and more. Low power amateur radio fun!
Please support QRPer by adding us to your whitelist in your ad blocker. Ads are what helps us stay online. All of our ads are ham radio related--no junk, we promise! Thank you!
