Tag Archives: Zebulon B. Vance Birthplace (US-6856)

Field Reports, Morse Code, News, Portable, POTA, QRP, Videos

Pairing the Elecraft KH1 and my Tufteln No-Transformer (aka, Speaker Wire) Antenna

7 Comments

On Thursday, November 30, 2023 I had a chunk of afternoon open to fit in some Parks On The Air time. My travels took me near one of my favorite local parks: the Zebulon Vance Birthplace Historic Site (K-6856).

As I packed my car that morning, I brought along some of my Mountain Topper transceivers as well. The plan was to first shoot a video comping the new Elecraft KH1 to these venerable SOTA machines, then do a POTA activation with the KH1 and a new-to-me kit antenna.

The Mountain Topper comparison took a bit longer than I had anticipated (surprise, surprise) so my POTA time was actually somewhat limited. If interested, my KH1/Mountain Topper comparison was posted several weeks ago–click here to check it out.

Tufteln No-Transformer EFRW

One goal of my afternoon activation was to finally put my new-to-me Tufteln “No-Transformer” end-fed random wire antenna on the air.

You might recall that I shared a campsite–during the W4 SOTA campout last year–with good friend Joshua (N5FY) of Tufteln fame and fortune. Being the antenna guy he is, Joshua brought along a full antenna building station and set it up on our picnic table. That first afternoon at camp, he gave me a kit to build this random wire antenna. Thanks again, OM!
These “No-Transformer” random wire antennas are designed to be paired with a good ATU–either external or internal. This type of antenna couldn’t be more simple.

Since there’s no transformer (no 9:1, etc.) the ATU does all of the heavy lifting to make a match. While this might not seem like an efficient way of doing things, one benefit of this design is that there’s no feed line: the radiator and counterpoise connect directly to the radio if your radio has a built-in ATU.  I’ve found that there’s some inherent efficiency in this approach.

Just two wires (radiator and counterpoise) connected directly to a BNC with a little strain relief.

The antenna is identical to the speaker wire antenna I built in the field and have used so extensively over the past few years. Joshua’s design is just much lower-profile and more compact.

When I built this particular antenna, I decided to go for a much longer length than any other random wire I’ve made to date. The idea was to have an antenna that might possibly match 80M. Joshua might correct me, but I believe we cut something between 70-80 feet for the radiator.

At Vance, I deployed this antenna into some short evergreens that surround the picnic shelter. It wasn’t an ideal deployment, per se, but adequate for a quickie activation!

I’ve learned that the length I chose for this radiator isn’t ideal for most of my ATUs to hit some bands. I will end up trimming this antenna a bit until I find the right length. I’m tempted to shorten it for matching on 60 meters, then build another 9:1 random wire to hit 80 and possibly 160 meters.

Setting up the KH1 took no time at all. I did discover during this activation that I needed to better secure the KH1 to the table. Wind gusts were tugging on the random wire a bit (as the trees swayed) and it would move the KH1 around on the table. The KH1 weighs less than a pound, so it’s super lightweight! This will be easy to fix next time.

Gear:

Note: All Amazon, CW Morse, ABR, Chelegance, eBay, and Radioddity links are affiliate links that support QRPer.com at no cost to you.

On The Air

I tuned the EFRW antenna on 30M and got a perfect impedance match.

I started calling CQ POTA and hunters replied!

In fact, I worked ten stations in exactly ten minutes. Two of them were Park-To-Parks–thanks KD8IE and KC3WPW!

I worked two more stations for a total of only twelve logged. I would like to have spent more time on the air, but I had two appointments on my schedule that afternoon.

QSO Map

Here’s what this five watt activation looked like when plotted out on a QSO Map:

Activation Video

Here’s my real-time, real-life video of the entire activation.  As with all of my videos, I don’t edit out any parts of the on-air activation time. In addition, I have monetization turned off on YouTube, although that doesn’t stop them from inserting ads before and after my videos.

Note that Patreon supporters can watch and even download this video 100% ad-free through Vimeo on my Patreon page:

Click here to view on YouTube.

Thank you!

Thank you for joining me on this short activation!

Had I realized how low I was running on time at the beginning of this activation, I might have made the antenna deployment and my commentary a bit briefer to have more air time. That said, I don’t do POTA for the numbers, I do it because it’s amazing fun and such a positive part of my day. This little activation was no exception! Pure radio fun.

I hope you enjoyed this field report and my activation video as much as I enjoyed creating them.

Of course, I’d also like to send a special thanks to those of you who have been supporting the site and channel through Patreon and the Coffee Fund. While certainly not a requirement as my content will always be free, I really appreciate the support.

As I mentioned before, the Patreon platform connected to Vimeo make it possible for me to share videos that are not only 100% ad-free, but also downloadable for offline viewing. The Vimeo account also serves as a third backup for my video files.

Thanks for spending part of your day with me!

Have a brilliant weekend, friends!

Cheers & 72,

Thomas (K4SWL)

Articles, Field Reports, News, Portable, POTA, QRP, QRP Radios, Reviews, Videos

Getting To Know You: The Yaesu FT-817/818 Series Portable QRP Transceivers

13 Comments

I’m very fortunate in that in the past few years I’ve acquired a number of QRP radios that I use in rotation when I do park and summit activations.

I’m often asked for advice on choosing radios, and as I’ve mentioned in the past, I feel like the decision is a very personal one–everything is based on an operator’s own particular preferences.

I’ve written formal reviews about most of the field radios in my collection. In those reviews, I try to take a wide angle view of a radio–to see how it might appeal to a number of types of operators. I highlight the pros and cons, but I don’t focus on my own particular take because, again, my style of operating might not match that of readers. I try to present the full picture as clearly as I can and let the reader decide.

The Getting To Know You series gives me an opportunity to highlight one radio at a time and showcase what I love about it and why it’s a part of my permanent radio collection. After we spend a bit of time talking about the radio, we’ll do a park or summit activation with it!

The Yaesu FT-817 and FT-818 Series

As I mention in my “Getting To Know You” video below, my very first dedicated QRP field radio was the original Yaesu FT-817 (non-ND version), so it has a special place in my heart.

At the time, I was living in the UK and travelling extensively throughout Europe with my UK call (M0CYI).

The FT-817 hit the market and it blew my mind. Up to that point, there were no general coverage QRP radios on the market that small, that comprehensive, and that even sported VHF/UHF multi-mode coverage. It even had a small internal battery pack! What?!

I was an early adopter of this radio and travelled with it extensively–indeed, in all of the years I lived in the UK and Europe, the FT-817 was my only amateur radio transceiver.

Fast-forward to 2023–some 23 years later–and I still have an 817. Actually, I have two 817ND’s and one 818ND (although, I plan to sell one of my 817NDs soon–I don’t need three!).

I find the 817/818 to be an incredibly robust and capable field radio. It’s also a brilliant value–few radios offer you the capabilities of the FT-817/818 for under $700.

My FT-817ND in an Armoloq TPA-817 Frame.

Yaesu discontinued the FT-818ND almost exactly one year ago. Retailers no longer have new stock, but there are loads of them on the used market. Keep in mind that the FT-817/818 was a cash cow for Yaesu for over two decades–the used price remains fair because there’s just so much supply out there. I routinely see 817ND and 818ND models selling for between $375-700 depending on how they’re configured and what’s included.

If you’re looking for a comprehensive article about the Yaesu FT-817/818 series, I would encourage you to check out this piece I originally wrote for The Spectrum Monitor magazine.

Time to activate! Continue reading Getting To Know You: The Yaesu FT-817/818 Series Portable QRP Transceivers →

Antennas, Articles, Field Radio Kits, News, Portable, POTA, QRP, QRP Radios, Travel, Videos

Coffee, QRP, & Question: Is any field kit more portable and versatile that Elecraft’s KX2/AX1 combo?

37 Comments


Lately, I’ve been kitting out another fully self-contained field radio kit that would be small enough to fit in my EDC (everyday carry) laptop bag–something super compact.

I’ve been getting some great ideas from those of you who have added your kits to the Field Radio Kit Gallery.

[By the way, if you’ve submitted your kit to the gallery and haven’t seen it yet, note that I’m posting these in the order received and there are many in the pipeline!]

I’ll likely build my EDC field kit around the Elecraft KX1 or the Mountain Topper MTR-3B, then pair it with a good wire antenna.

My EDC laptop bag: the Tom Bihn Stowaway

But this process got me thinking: if money was no object, and I wanted the most compact and versatile multi-band field kit, what radio and antenna system would I choose?

My answer? A kit built around the Elecraft KX2 and AX1 antenna.

In my experience, the KX2 AX1 combo is hard to beat. It’s compact, effective, low-profile, and you can set it up pretty much anywhere.

Let’s explore my reasoning here keeping in mind–in my world–this is a very deep rabbit hole to go down. I’ll do my best–no promises–to keep this as concise as possible:

Compact, Low-Profile, Self-Supporting, and Simple

Here are all of the components of my typical KX2 AX1 field kit:

This is all that is needed for a field activation.

And if you’re an SSB operator? You don’t really need a microphone because one is built into the KX2 (that said, I’d suggest you build a compact mic if you plan to do a lot of SSB operating).

If I wanted to make this kit even a bit more versatile? I’d add a kneeboard to the list. This gives one the ability to operate without a picnic table.

I recently published a video showing how the KX1 and AX1 can fit on a kneeboard.

Portable and Versatile

What makes this field kit so portable is that the KX2 is one of the most compact general coverage HF transceivers on the market.

It’s certainly the most compact (at time of posting) when you realize that two important components–the battery and ATU–are internal options.

The AX1 antenna is also incredibly compact–it comes apart in such a way that no one component is longer than about 6 inches. What you see in the photo above is the entire radio and antenna system.

Yes: A Compromise

Sure–and let’s get this out of the way right up-front–the AX1 is a compromised antenna, and being a massive fan of simple wire antennas myself, I know a properly deployed wire in a tree is going to provide better gain each and every time.

Also, people who live in more remote parts of the world–say, Hawaii, the Yukon, or Perth, Australia–where the amateur radio density is sparse within their propagation footprint, the AX1 will not be as productive as it is for me here in the eastern half of North America. Continue reading Coffee, QRP, & Question: Is any field kit more portable and versatile that Elecraft’s KX2/AX1 combo? →

Field Reports, News, Portable, POTA, QRP, QRP Radios, QRPp, Reviews, Videos

Getting To Know You Series: The Elecraft KX3–My thoughts, notes, and one extreme QRPp contact!

16 Comments

I’m very fortunate in that in the past few years I’ve accumulated a number of QRP radios that I use in rotation when I do park and summit activations.

I’m often asked for advice on choosing radios, and as I’ve mentioned in the past, I feel like the decision is a very personal one–everything is based on an operator’s own particular preferences.

Over the years, I’ve written formal reviews about most of the field radios in my collection. In those reviews, I try to take a wide angle view of a radio–to see how it might appeal to a number of types of operators. I highlight the pros and cons, but I don’t focus on my own particular take because, again, my style of operating might not match that of readers. I try to present the full picture as clearly as I can and let the reader decide.

The Getting To Know You series gives me an opportunity to highlight one radio at a time and showcase what I love about it and why it’s a part of my permanent radio collection. After we spend a bit of time talking about the radio, we’ll do a park or summit activation with it!

The Elecraft KX3

I was originally introduced to the Elecraft KX3 at the 2011 Dayton Hamvention–over a decade ago at time of posting!

I was commissioned to write a review of the KX3 for the Monitoring Times Magazine and Elecraft was kind enough to lend me a brand new KX3.

At the time, there was nothing like the KX3 on the market and I felt like I’d just received a radio from the future.

The KX3 offered 160-6 meter general coverage with an optional 2 meter module, ATU, internal AA battery compartment, and roofing filters. The controls were top mounted and current draw in receive was as little as 150 mA. At the time, there was no other radio on the market that could compare with the KX3’s field prowess.

But it wasn’t just its field design that was impressive.

In fact, when Rob Sherwood tested the KX3, it placed at the top of his list which is sorted by Third-Order Dynamic Range Narrow Spaced.

This field radio sported a bullet-proof front end and true contest chops, displacing $10,000+ high-end rigs.

Today, the KX3 (at time of posting) is still number 12 on Rob’s list. An impressive feat!

Herein lies the danger of doing reviews…

I didn’t have the KX3 in my grubby little hands for more than a few hours when I decided I had to buy one. I sold some gear to free up money and I bought the KX3 Elecraft sent me on loan for the full price.

I’ve taken this KX3 on numerous activations and on international travels. It’s a brilliant QRP companion.

These days, it’s in the shack more than in the field because I keep it hooked up to my KXPA100 amplifier. I feel like the KX3/KXPA100 combo is like having a poor man’s K3. As a huge bonus, the KX3 takes up little space on my table and the KXPA100 sits on a shelf–the overall footprint is much smaller than a K3 or K3s. It’s like having a remote head on my desk and works perfectly for my limited space shack.

The KX3 is a stellar, benchmark field radio, so it was great fun to feature it in this video.

Zebulon B. Vance Birthplace (K-6856)

For this Getting To Know You report and video, I decided to activate one of my favorite local parks on September 12, 2023: the Vance Birthplace. Continue reading Getting To Know You Series: The Elecraft KX3–My thoughts, notes, and one extreme QRPp contact! →

Accessories, Antenna Tuners, Field Reports, News, Portable, POTA, QRP, Reviews, Videos

POTA QRP: Testing the new JNCRadio CS-818 ATU with my upgraded Yaesu FT-818ND

2 Comments

I love testing new stuff in the field and on Tuesday, May 2, 2023 I had a great opportunity to test a number of new items.

FT-818ND Upgrades

I mentioned in a previous post that I purchased a new Yaesu FT-818ND from DX Engineering on December 28, 2022. It smacked of an impulse purchase only in that I had not planned to purchase the radio that very day.

Thing is, Yaesu announced they were discontinuing the FT-818 and I always planned to purchase one to replace out one of my two FT-817NDs. I didn’t want to miss the opportunity to buy a new one under warranty, so I bit the bullet on short notice.

Within a few days of purchasing the FT-818ND, I also purchased another 500 kHz CW filter, a WINDCAMP 3000mAh LIPO battery and a WINDCAMP Anderson PowerPole Adapter.

I planned to make the FT-818ND my primary HF radio and use the other FT-817(s) for full duplex satellite work (and HF too, of course, especially since one is now in a TPA-817 pack frame).

I had all of the upgrades in hand by mid-February, but that Yaesu FT-818ND sat in its box under my radio bench until late April. I was so busy evaluating other gear and keeping up with my busy family life,  it had almost slipped my mind. Well, that and I received the incorrect narrow Collins filter from a seller on eBay; instead of sourcing a replacement, I decided to steal an original 500 Hz filter from one of my other radios while waiting on a replacement.

Those narrow Collins filters? They’ve become pure unobtainium over the past couple of months. At one point, eBay was chock full of them. No longer…

It had actually been a very long time since I pulled out a brand new (non-loaner) radio from the box. It’s funny because I remember opening my first FT-817 back in…what…2001? The box and packaging were identical some twenty one years later!

I unboxed then immediately opened the chassis of the FT-818ND to add the Collins filter, attach my Portable Zero side rails (stolen from my FT-817), add the Windcamp battery pack, and add the Windcamp Anderson PP adapter.

JNCRadio CS-818 ATU

Around the same time, Jesse, with Chelegance, also sent me his latest ATU: the CS-818 which is specifically designed to work with the FT-817 and FT-818 series radios. To be clear, Jesse sent the MC-818 at no cost to me to evaluate.

The CS-818 actually works with any radio, but it ships with the command cable for the FT-817/818 for full integration.

The CS-818 can handle up to 30 watts of power, so it’ll pair nicely with any QRP radio. If using it with a QRO radio, you’d have to be very careful not to push more than 30 watts.

NOTE: Due to the frame rate of my camera and the refresh rate of the OLED display, only a portion of the display shows up in my shots.

In truth, ATUs don’t get me terribly excited. I’m quite content with my Elecraft T1 and Emtech ZM-2; these two portable ATUs match anything and everything I use in the field. Continue reading POTA QRP: Testing the new JNCRadio CS-818 ATU with my upgraded Yaesu FT-818ND →

Field Reports, Morse Code, News, Portable, POTA, QRP

Postcard Field Report: Pairing the Elecraft KX2 and MM0OPX EFHW to face dubious propagation

2 Comments

Welcome to another Postcard Field Report!

I’m still in Dayton after Hamvention weekend, but didn’t want to skip my field report and activation video, so a hope you enjoy the slightly shorter report below:

Zebulon Vance Historic Birthplace (K-6856)

On Tuesday, April 25, 2023, I once again stopped by my weekly POTA spot, the Vance Birthplace.  By mid-May, I will no longer be passing by this excellent little POTA site on a weekly basis, so my activations here will be much less frequent. A shame because I do love this site and its staff!

For this particular activation, I’d planned to test my almost perfectly trimmed QRPguys Tunable EFHW antenna, but I left it at home. Not a problem, actually, because after this activation, I discovered it’s not as resonant as I’d like on the 20, 15, and 10 meter bands, so I may tinker with the toroid windings a bit–perhaps removing one.

Instead, I deployed my MM0OPX EFHW which I thought was actually a great choice considering propagation had been incredibly unstable the previous few days.

Since I also had my Elecraft KX2, I knew I could use its built-in ATU to move to non-resonant bands like 17 and 30 meters.

This activation video is a long one because I had quite a lot of time to play radio and, frankly, it was nice taking things at a casual pace.

After deploying the antenna (twice!) I set up the radio, connected my Begali Traveler, and hopped on the air! Continue reading Postcard Field Report: Pairing the Elecraft KX2 and MM0OPX EFHW to face dubious propagation →

Field Reports, Morse Code, News, Portable, POTA, QRP, Videos

Postcard Field Report: Pairing my new-to-me Palm Pico with the TX-500 at K-6856!

8 Comments

I finally snagged one.

In the world of lightweight, super-compact QRP radio kits, there is one key that is, essentially, a legend: the venerable Palm Pico.

The Palm Pico has a stellar reputation because it’s super lightweight, can retract into its housing to protect it in transport, and can be directly attached to various radios with a specific mounting assembly or via Velcro or magnets.

The Palm Pico has been out of production for some time now and, they’re so highly desired, they often fetch the original purchase price or even higher on the used market. Truth is, so few Pico owners are willing to sell that very few of these keys ever enter the used market.

I was very lucky, indeed, when a long-time Patreon supporter reached out and offered to sell me her Palm Pico and Palm Mini paddles along with a KX2 mounting assembly. She had noticed how my eyes lit up when Josh (KI6NAZ) showed me his Palm Pico paddle on an HRCC Livestream in February.

The price she offered was amazingly low. She told me that she favored some of the other keys in her collection and wanted to give me the opportunity to own them. They were like-new with all original boxes and accessories.

How could I resist? I’m so grateful.

I really look forward to using the Palm Pico and Palm Mini this year. I’m especially eager to hook up the Palm Pico directly to the KX2 with its custom mounting bracket.

I decided to take my Palm Pico on a maiden POTA activation at the Vance Birthplace on April 18, 2023.

Postcard Field Report

I’ve got a load of videos in the pipeline and to keep from falling behind publishing them, you’re going to see more of my slightly shorter “Postcard Field Reports” for the next couple of weeks during my travels.

These postcard reports contain all of the core information, just less wordy.  (In theory!)

Zebulon Vance Historic Birthplace (K-6856)

I arrived at the Vance Birthplace and checked in quickly with the park staff. There were no picnic shelter reservations that day but there was a family with children eating a picnic lunch when I arrived. Continue reading Postcard Field Report: Pairing my new-to-me Palm Pico with the TX-500 at K-6856! →

Accessories, Field Reports, Grab And Go, Morse Code, News, Portable, POTA, QRP, QRP Radios, Reviews, Videos

POTA Field Report: Testing my CP Gear Tactical Aircrew/Pubs Bag with FT-817ND and Armoloq TPA-817 Pack Frame

7 Comments

Last year, during a Black Friday sale, I took a calculated risk and purchased a bag I hoped would accommodate my Yaesu FT-817ND that has been outfitted with an Armoloq TPA-817 Pack Frame.

CP Gear Tactical Aircrew/Pubs Bag

Rod (VA3ON) first introduced me to CP Gear Tactical–a  military pack manufacturer based in New Brunswick, Canada.

I’d had their their Aircrew/Pubs Bag with Padded Tablet Pocket on my wish list since the Ham Radio Workbench podcast episode where we talked about backpacks and pouches. CP Gear Tactical manufactures a wide variety of gear primarily for the Canadian military market. Everything is made either in Canada or the US (or both).

I contacted CP Gear Tactical shortly after outfitting my FT-817 with the TPA-817 pack frame. I measured the frame carefully and asked if the interior padded pocket (which is actually designed to hold a tablet–might fit my radio.

I never heard back from them. I could have called them, but on Black Friday, when it was on sale for 20% off and free shipping, I decided to throw caution to the wind and simply purchase it. My total price in USD was something like $62 shipped.

As soon as I opened the CP Gear pack, the first thing I did was check to see if the FT-817 with pack frame would fit in the interior pocket.

Much to my surprise, it fit it perfectly!

Indeed, it’s as if the pocket were specifically designed to accommodate the FT-817ND/TPA-817 combo.

Even the middle Velcro strap fits precisely in the middle of the radio between the pack frame side extensions. The strap holds the rig securely; once, I accidentally fumbled while holding the bag and even though it was upside down, the FT-817 remained securely inside. The strap held it in place.

The bag has loads of room inside. In fact, you can very easily transform it into a fully self-contained field radio kit.

I actually give a small tour of this pack in my activation video below, so if you’d like to see some of the exterior pockets, I would encourage you to check it out!

Zebulon B. Vance Birthplace (K-6856)

On Tuesday, April 11, 2023, I once again popped by the Vance Birthplace for a leisurely POTA activation–I thought this activation, in particular, would be a good one to test my new Aircrew/Pubs bag! Continue reading POTA Field Report: Testing my CP Gear Tactical Aircrew/Pubs Bag with FT-817ND and Armoloq TPA-817 Pack Frame →

Accessories, Field Reports, Grab And Go, Morse Code, News, Portable, POTA, QRP, Reviews, Videos

Field Report: BROG Gadget Bag Tour, New Anker Speaker, & Pairing the KX3 w/the MC-750 for Serious QRP POTA Fun!

29 Comments

On Tuesday, March 28, 2023, I packed my Elecraft KX3 and took it to the Zebulon Vance Historic Birthplace (K-6856) for a nice, relaxing, early afternoon POTA activation!

It had been a few months since I’d taken the KX3 to the field and it really does deserve some outdoor time because…well…I still think it’s one of the best HF field radios on the market.

I’m spoiled, though, because I also own a KX2 and it does 80% of what the KX3 does, is much smaller, and sports a very long-lasting internal battery. Because of this, my KX2 gets way more field time and the KX3–hooked up to a KXPA100–is my main radio in the shack.

When I make an activation video in the field, I like using a speaker rather than recording from the line out of the radio. Besides the extra post-processing, sometimes the line-out audio from left and right channels are out of phase from each other and end up cancelling each other out in YouTube videos if listening in mono. I recently learned how to fix this, but I find the whole process just adds *that* much more time to post-processing and I’m always pressed for time.

The Elecraft KX3 has a built-in speaker, but it’s pretty anemic. I almost always pair the KX3 with an external speaker to amplify the otherwise excellent KX3 audio for my activation videos.

On this particular day, I had a new speaker to try as well: an Anker Soundcore Mini. I purchased this speaker on the same day I posted Mike’s speaker search and review of the Soundcore Mini. Although I have a Sony SRS-XB12 portable speaker and love it, they’re no longer produced and the battery life isn’t quite as good as the Soundcore Mini (Anker states up to 15 hours per full charge).

This activation would give me an opportunity to really test the Anker Soundcore Mini in the field. In the end, it did a brilliant job.

I should note that I also brought my Blue Ridge Overland Gadget Bag (see above) to the field that day, so I include a little tour and overview of this pack in my activation video.

I did recently post a review of the BROG Gadget Bag here on QRPer as well.

Zebulon B. Vance Birthplace (K-6856)

As I mention in my activation videos, Vance is a small park and, unless you plan to operate from your car, there’s really only one good site to set up: in the picnic shelter. Thing is, if a school, club, or civic group is scheduled to meet that day, the picnic shelter will almost certainly be reserved for them.

Each time I activate Vance, I ask the park staff in advance if the picnic shelter is reserved and if it’s okay if I perform the activation. Fortunately, the shelter is reserved only about 20% of the time. On days when it’s reserved, I simply activate elsewhere.

On the 28th, I had the site to myself and the staff encouraged me to activate as long as I wanted to. Continue reading Field Report: BROG Gadget Bag Tour, New Anker Speaker, & Pairing the KX3 w/the MC-750 for Serious QRP POTA Fun! →

Field Reports, Morse Code, News, Portable, POTA, QRP, QRPp

QRPp POTA: How many hunters can I possibly log with only 100 milliwatts–?

6 Comments

As I walked out the door on the morning of Tuesday, March 21, 2023, I grabbed my Elecraft KX2, MM0OPX 40 meter end-fed half-wave, and a key I hadn’t yet taken to the field: my Bamakey TP-III!

I had a full day of errands, appointments, and carting my daughters to/from school, but I also had a good 90 minute window to play radio!

As I’ve mentioned previously, the Vance Birthplace (K-6856) is incredibly convenient this particular school term. I pass by it twice a week, and I feel incredibly fortunate because it’s a wonderful POTA site with POTA-friendly staff. They all know me quite well there at this point.

The Vance site is a small park and the only negative (from the point of view of a POTA activator) is if you have poor timing, you might arrive only to find that a large school group has taken over the site. This is especially a concern on weekdays during school hours–in other words, the time I usually activate Vance.

I pulled into the Vance site that morning and there were no vehicles there other than park staff. A good sign so far!

The only appropriate spot to activate at Vance (if you operate a portable HF station) is in or near the picnic shelter. The rest of the site is where visitors wonder through the old homestead and take guided tours.

I never set up my station in the middle of park activities or in a viewshed.

At the end of the day, we represent all Parks On The Air activators and the amateur radio community at large when we’re in public spaces. The last thing we want to do is detract from others’ park experience.

Before pulling any gear out of the car, I walked into the visitor center and asked the park staff for permission to set up in the picnic shelter. I always do this because if a school or tour group is scheduled to visit the site that day, they almost always need the picnic shelter and have it reserved.

Fortunately, no one had scheduled the picnic shelter, so the park ranger told me, “It’s all yours! Have fun!”

Proper POTA Flea Power!

I like shaking up each new activation in some small way so that it’s not a carbon copy of any previous activation.

Since, like most POTA activators, I visit the same local parks the bulk of the time, it adds a little extra challenge and fun to try different gear combinations, experiment with new antennas, or even (as in this case) try different power settings–! Continue reading QRPp POTA: How many hunters can I possibly log with only 100 milliwatts–? →