Tag Archives: POTA

Field Reports, FT8, Guest Posts, Kits, QRP

FT8 Portable: Steve takes his Phaser Digital Mode Transceiver to the field!

8 Comments

Many thanks to Steve Allen (KZ4TN) who shares the following guest post:

FT8 QRP Portable

I recently finished my Phaser digital mode QRP transceiver kit and have had a hankerin’ to take it portable, and today was the day.

Temps were in the upper 60s with clear blue sky. About fifteen minutes from home is the Watauga Point Recreation Area on Watauga Lake in Carter County, Tennessee. It’s a day use area and is not an official POTA site, though it is in the Cherokee National Forest, which is. I opted to not make this a POTA activation as it was more of a first time “proof of concept” trip.

The Phaser is a small digital mode transceiver designed by Dave Benson, K1SWL with the enclosure the design of AA0ZZ, Craig Johnson. Phasers were available for most all of the HF bands, put out between 3 to 5 watts, and in addition to FT8, have the ability to program a second frequency to operation other digital modes such as PSK-31. They were sold and supported through Midnight Design Solutions, but unfortunately are no longer being offered. Occasionally I see them coming up for sale on the QRZ.com swapmeet forum.

In addition to the Phaser, I brought an FT-891, an LDG Z-11Pro 2 tuner, a netbook computer, and two batteries; a small AGM for the Phaser and a deep cycle lead acid power pack for the FT-891. I brought my W2LI magnetic loop antenna and a homebrew “NorCal Doublet” that sets up as an inverted V on a 20 ft kite pole as a backup antenna. The whole kit (excluding the batteries) fits in two wooden ammunition crates which make it really easy to drive, set up, and operate.

One note on using the W2LI mag loop. You need to first tune the antenna using the radio and listen for an increase in the background noise level. Using the Phaser while connected to my computer made that not possible. If I had brought a small set of earphones I could have plugged them into the audio out jack on the Phaser and tuned for max background noise. So, instead I connected FT-891 to the loop and used it to tune the antenna to 30 meters. Next time bring earphones.

After about fifteen minutes I had the station set up. The waterfall on WJST-X showed that the Phaser was receiving transmissions but no displayed text. Unfortunately I had neglected to synchronize the computer clock before I left the house. The netbook is pretty old and the internal battery needs to be replaced. What to do? First I tried to manually sync the clock to WWV but Windows 10 won’t let you set the seconds in the clock to 00. As I had cell service I figured I could use my cell phone as a hotspot. Never having set it up before I have to say that it was pretty easy. Thank you 21st century tech! This allowed me to sync the internal netbook clock, but it also let me log contacts on QRZ.com, and check my propagation on PSK Reporter.

The Phaser puts out around 3.5 watts, so I didn’t respond to a CQ that was less than -5 dB. While PSK Reporter showed reception of my signal up and down the East coast, contacts were scarce. I seemed to have a window open up into New England as I worked PA, MA, and CT. I was right in the middle of my fifth contact when the computer battery died so that was it. WSJT-X reported these stations on the +dB side for reception but my signal strength was always reported at < -10 dB.

The 30 Meter band was up and down with band conditions being reported as only Fair on the Solar-Terrestrial Data report on QRZ, and at one point for about a half hour there were no signals displayed on the waterfall.

With a loop antenna on a tripod and 3.5 watts I can’t complain. I’m thinking of building an RF amplifier to boost the output up to 10 watts which should help. My next step is to load WSJT-X on my tablet and see how portable of a kit I can assemble. As FT8 was designed as a weak signal mode, it’s perfect for QRP portable operating.

Steve Allen, KZ4TN

Antennas, Field Reports, Kits, News, Portable, POTA, QRP

Putting the KM4ACK End-Fed Half-Wave on the air at Table Rock!

9 Comments

Lately, I’ve been in the mood to build kits.

I say “lately” but in truth I’m always tinkering with something in the shack.

The radio room/office at my QTH is pretty small, though, and I don’t have a dedicated, full-time workbench. I’ve been mentally re-arranging the room and trying to sort out a way to make space for one because it would be so nice to have a spot where my soldering iron could remain hooked up at all times.

For the moment, when I work on kits I use our dining room table so I try to stick with one or two session kits as opposed to the multi-day variety.

KM4ACK EFHW

KM4ACK Image

A number of readers and subscribers have asked me to check out the KM4ACK 49:1 End-Fed Half-Wave antenna kit.  This kit is produced by Jason (KM4ACK) and purchasing his kits supports his excellent YouTube channel.

I have a lot of field antennas, so I don’t really need another EFHW, but then again I like having a dedicated resonant wire antenna with each of my radios and, (hey hey!) it’s a great excuse to build a kit!

KM4ACK Image

I purchased the KM4ACK kit and received it within a week. Building the antenna was incredibly straight-forward. Jason packaged the components in small bags so finding parts was easy. I really appreciate kits that aren’t one large “bag-o-parts.” Continue reading Putting the KM4ACK End-Fed Half-Wave on the air at Table Rock! →

Field Reports, News, POTA, QRP, Videos

40M Activation: Pairing the Icom IC-705 and CHA LEFS at Tuttle Educational State Forest

14 Comments

I’ve gotten a few messages from readers lately asking, “Why no love for the Icom IC-705?”

Looking back, I realize that I haven’t had the ‘705 in the field for quite some time (at least, in a video and field report).

Truth is, the ‘705 has been doing duty as a shortwave listening receiver in shack and just hasn’t hopped into my field pack recently. Since it’s important for the health of all field radios to soak in the outdoors on a regular basis, I packed it in my bag and took it to one of my favorite parks.

Tuttle Educational State Forest (K-4861)

The weather was beautiful on Thursday, October 21, 2021.

When I arrived at Tuttle, the first thing I did was hike their 2 mile loop to get the blood pumping.


This also gave me time to decide on the antenna to deploy: my Chameleon CHA LEFS.

The CHA LEFS sloper

The CHA LEFS has served me quite well in the past, especially on days with mediocre propagation.

During my hike I decided to do the entire activation on 40 meters only, just to get a better idea how the CHA LEFS’ propagation footprint might look with a larger sample size.

Gear:

On the Air

This was also the first time I’d used my N0SA paddles with the IC-705. Isn’t it cute?

Setup was quite easy.

I deployed the CHA LEFS with the feed point at about 35-40′ into a large tree.

The radiator sloped down to a point in the middle of a field and the end was elevated perhaps 4′ off the ground. I secured the end of the antenna to a length of paracord, the end of which was attached to a heavy stick on the ground, stretching the radiator.

The CHA LEFS is resonant on 40 meters, so no external ATU was necessary.

I hopped on the air, started calling CQ POTA in CW and within 10 minutes was rewarded with 10 contacts. It doesn’t get much better than this for a good start!

I continued calling CQ and, in the end, worked a total of 22 contacts in 30 minutes–almost all in CW. Check out the video below to see how it all played out.

Many thanks to KC5F and N9UNX for the Park-To-Park contacts!

Video

Here’s my real-time, real-life video of the entire activation (less antenna set up and take-down):

Click here to view on YouTube.

QSO Map

The QSO Map shows an interesting pattern: a ring with a few close regional stations (almost NVIS), and an outer ring of 40 meter skywave:

Thank you!

I believe one of the attractions of activating parks and summits is the fact that we really have no idea in advance how it might all play out. It’s a bit like going fishing.

I’ve gotten a lot of questions from readers lately about what propagation tools I use. In truth, my main propagation forecasting tool is my buddy Mike (K8RAT). Before I head out–or if he knows I’m hitting the field–he’ll usually text me current conditions and they’re quite accurate.

At the end of the day, though, propagation forecasts never stop me from doing an activation when I want to play radio. I just go out there and see what happens. As I’m sure my childhood fishing buddy–my Great Uncle Luther–would have said, “Any day fishing is better than a good day at work!” (Of course, a real quote from Uncle Luther would have included more “colorful metaphors.”)

A special thanks to those of you who are supporting the site and channel through Patreon and the Coffee Fund. While certainly not a requirement as my content will always be free–I really appreciate the support.

73,

Thomas (K4SWL)

Field Reports, News, POTA, QRP

POTA Field Report: Coffee & QRP at Tuttle Educational State Forest

28 Comments

Thursday, October 28, 2021 was a wet, rainy day but I wanted to do a POTA activation on the way back to the QTH after having visited my parents for a couple nights.

I didn’t have a lot of radio gear with me on that trip, but I had the right gear: my Elecraft KX2 transceiver and AX1 antenna. If I could activate a park under a covered picnic shelter, I knew I would stay dry while playing radio.

There are only two parks within a reasonable detour that have covered picnic shelters: Lake James State Park and Tuttle Educational State Forest.

Lake James was the shortest detour, but they tend to be busier than Tuttle and last time I was there? Yeah, the picnic shelter was occupied.

On the other hand, I was nearly certain that I would have the picnic shelter all to myself at Tuttle. It would be a slightly longer detour, but worth it. Continue reading POTA Field Report: Coffee & QRP at Tuttle Educational State Forest →

Field Reports, News, Portable, POTA, QRP

Pairing the KX2 & Speaker Wire Antenna at Johns River State Game Land

4 Comments

You might have noticed that normally I’m a good 2-4 weeks behind posting activation videos and field reports. This is due to the fact that I typically record an activation video one week, upload it sometime within the following two weeks, then write up the field report, add photos, and put it all together when the stars align.

Much of my workflow is dictated by the fact that it can (literally) take 2-3 days for a video to upload from my rural QTH. Therefore, I never upload from home, only when I have proper bandwidth.

However, I’m happy to announce that this field report and video are going to move to the front of the line! Continue reading Pairing the KX2 & Speaker Wire Antenna at Johns River State Game Land →

Articles, How To, News

My Motto? Less theory, more practice!

43 Comments

I don’t often read comments in ham radio forums and discussion groups. 

Recently, however, I was trying to dig up information on a field antenna design and the search results lead me to two articles and discussions on two of the most popular ham radio sites on the internet. 

I read through the comments and (you might have guessed) was really disappointed with the number trolls who seemed to thrive in that fertile environment. It blows my mind that discussions like these seem completely unmoderated. I assume it’s a conscious decision since we seem to live in a society that rewards drama and division–I assume this leads to more site traffic and thus more revenue.

It’s a shame. It would be incredibly discouraging to a new ham who is reading the same article and comments looking for ideas. Gives one the impression the hobby is full of (I’ll keep my language clean here) schmucks.

But I digress…

What was perhaps equally discouraging were all of the comments from those who were trying to explain to the authors how the antenna design in their article simply wouldn’t work.  Even when the author posted positive results/data from having used the antenna. 

While not all of the naysayers were being rude–and sometimes in their roundabout way I’m sure they felt they were being helpful–I can’t help but feel sorry for them.

The naysayers, that is.

Why? These are people who are afraid to experiment. Continue reading My Motto? Less theory, more practice! →

Antennas, Field Reports, News, QRP

POTA Field Report: Pairing the Elecraft KX2 with a stolen doublet at Table Rock Fish Hatchery!

4 Comments

Someone asked me recently which activity I prefer more: Summits on the Air (SOTA) or Parks On The Air (POTA)?

Truth is, I like both.

I like SOTA because I love hiking and playing radio on the summits of some pretty impressive mountains.  I’m often treated to amazing views and the DX can be spectacular. I love the sense of accomplishment when the activation goes well and I’m back home later feeling a bit tired from a long hike. Good stuff!

I like POTA because it’s incredibly accessible (thus fits in my tight schedule easily). Many of the parks have great hiking trails, and there’s almost always a picnic table available making set up so much easier.  Here in western North Carolina it’s almost a given that park picnic tables are surrounded by large trees and have a reasonable amount of space, thus POTA sites can be ideal for antenna experimentation.

I don’t typically experiment with antennas during SOTA because after hiking 2-3 hours to a summit, I feel pretty invested in the activation and the last thing I want to do is roll the dice with my antenna.  With POTA, I can bring a few extra supplies or “plan B” antennas if something goes sideways.  Plus, unlike parks, summits are often lacking in tall trees so I stick with shorter wire antennas and self-supporting verticals.

On the morning of October 20, 2021, I decided that I wanted to try a new antenna or an antenna I hadn’t used in quite some time. My intention was to dig out my Wolf River Coils TIA vertical, but when I reached into my antenna bag, I pulled out a nondescript Shure microphone pouch. I scratched my head for a moment…

For the life of me, I couldn’t remember what this was, so I opened it up and discovered a doublet inside! Not just any doublet, either–based on the use of a 35mm film canister in the antenna’s construction, I knew it had to be a creation of my buddy Eric (WD8RIF).

Then my memory kicked in. Continue reading POTA Field Report: Pairing the Elecraft KX2 with a stolen doublet at Table Rock Fish Hatchery! →

Field Reports, Morse Code, News, POTA, QRP

POTA Field Report: Dodging the rain at Lake James State Park

8 Comments

On Thursday, October 7, 2021, I was driving back to the QTH and had a hankering to do an activation. There was only one problem…

Rain.

Lots of rain…

As I was driving on Interstate 40 west-bound, I passed through bands of rain producing torrential downpours; the kind that brings interstate traffic to a crawl. Weather-wise, this is not typically when I would contemplate a park activation. I did a quick mental inventory of what I had in the car. Turns out I had the Icom IC-705 and the Elecraft KX2.

I also had the Elecraft AX1 portable antenna. Having used the KX2/AX1 pairing under picnic shelters with success, it was a no-brainer what I’d use at Lake James.

Most North Carolina state parks have covered picnic shelters that are first-come, first-serve or can be reserved (at no small expense) for group gatherings. There’s a really nice large picnic shelter at the Catawba River access of Lake James State Park–in fact, I took shelter there earlier this year during an activation.

No matter how bad the rain, I knew I could play radio under the shelter with my KX2/AX1 pair. Continue reading POTA Field Report: Dodging the rain at Lake James State Park →

Field Reports, News, POTA, QRP

Field Report: POTA Roadside activation with a view!

2 Comments

On Monday, October, 18, 2021, I finished a few errands in Asheville, NC and realized I had just enough time to squeeze in an afternoon activation. The weather was beautiful, the fall air felt amazing, and although I had no clue what propagation was like, I needed some field radio therapy!

Blue Ridge Parkway to the rescue!

I’ve mentioned in previous videos that pretty much anytime I drive into Asheville I pass by the Blue Ridge Parkway. Over the years, I’ve discovered numerous POTA (Parks On The Air) spots scattered along “America’s Favorite Drive.”

It’s fall, so we’ve autumn leaf colors and loads of tourists in the region–especially on the BRP.

Even so, I’ve one favorite overlook that is often overlooked by tourist!

It’s a little unofficial turn-out on the parkway that offers up spectacular views. I believe the reason tourists pass by it is because it’s located just beyond one of the most popular overlooks in the area: the Tanbark Ridge Overview. Tourists stop at Tanbark to enjoy the views not knowing that a mere +/-200 meters away, there’s one they could enjoy all on their own. Continue reading Field Report: POTA Roadside activation with a view! →

Antennas, Field Reports, Morse Code, News, POTA, QRP

New N0SA paddles and Elecraft AX1 showing off during an impromptu POTA activation

12 Comments

On Monday, October 4, 2021, I was set to have a lunch with my good friend, Taiyo, who happened to be in town from Japan. We decided to grab some take-out and meet at a picnic area halfway between my QTH and where he would be staying during his visit. Turns out, the Vance Birthplace (K-6856) fit the bill perfectly–especially since rain showers were in the forecast all day and Vance has a covered picnic area.

I didn’t have an activation in mind that Monday because my focus was on spending time with a friend I hadn’t seen in years, but I brought the KX2 field kit with the AX1 antenna…you know...just in case.

Radio time!

After running a number of errands in town and grabbing some take-out lunch from Whole Foods market, I still ended up arriving at Vance about an hour early, so I pulled the KX2 and AX1 out of the car.

I thought this might be a good opportunity to attempt to prove (once again) that antennas like the AX1 are super fun and portable, but you can’t expect large aperture antenna results. Continue reading New N0SA paddles and Elecraft AX1 showing off during an impromptu POTA activation →