I realize that I’m fortunate, in many ways, that I perform POTA activations at times when parks are relatively quiet: weekdays, mostly, and during that 9-5 window when many are at work. On the flip side, I’m also activating when there are fewer hunters out there.
The upshot, for me, is that I rarely have any competition for picnic tables or activation spots at state and national parks. In general, as you’ll see in my activation videos, the park is quiet and sometimes I literally have the place to myself.
I actually take this for granted until I activate on a busy weekend or a holiday. Something like…
Labor Day!
While traveling back to the QTH on Monday, September 4, 2023, I decided to pop by Lake James State Park (K-2739) for a quick POTA activation.
Lake James State Park spans about 3,743 acres and is divided into two areas: the Catawba River Access and Paddy’s Creek Area.
Typically, I play radio at the smaller Catawba River area because there are so many excellent picnic sites with loads of trees.
The Paddy’s Creek area is much larger and (big bonus) has many more trails.
Paddy’s Creek also has a large beach and swimming/boating area with a huge parking lot and large covered picnic shelter (that is often occupied or reserved).
On Labor Day, the weather was gorgeous and, as you might imagine, the park was packed!
So why did I choose Paddy’s Creek on such a busy day?
I might have mentioned in a previous video that we recently purchased a used Volvo C40 Recharge EV (Electric Vehicle). While I normally charge it up at home, I’m trying to familiarize myself with charging on the go as well.
I’d read that Lake James has two (free!) convenience chargers at the Paddy’s Creek area. I drove to the site mainly to see where the were located. On such a busy day, I didn’t assume either of the chargers would be available–my plan was to find them, then head to the Catawba River access.
But turns out, the only available parking spot I could find at the Paddy’s Creek lot was one EV charging spot right there at the beach access and shelter! What!?! That’s an omen, I told myself, so I pulled into the spot, plugged in, and by golly, the car started charging.
I’m still new at this stuff, so it’s all a bit of magic to me. Forgive my excitement.
As I often do, I hunted yet another CW POTA activator during my lunch break while working from home.
I have been learning CW for most of the year. Early on, I realized that with a bit of practice sending, and after listening to recordings of POTA activations, like those from Thomas, I could reliably send the proper exchange needed to hunt a POTA activator.
If you can give your call sign, signal report, and state abbreviation, you can make the contact. I started early on with just the basics and then added some of the common “extras” like GM for good morning, TU for Thank You and then 73. Not only is this great practice for getting on the air sending CW, it’s also very rewarding while learning CW. The exchange is short, standard, and easy to follow with a bit of practice.
CW Practice with the Morserino32 and a Cup of Coffee
Once I finished my upgrade to Extra I focused all my spare time, not much though truth be told, on practicing CW.
At some point this summer I set the goal to Activate POTA/SOTA during the W4G SOTA campout this fall. This really wasn’t an aggressive goal, one I figured was attainable but also one that I could hold myself accountable to even knowing I had a very busy summer ahead of me.
W4G SOTA Campout Summit View Yanah Mountain Bald October 2022
During one of the LICW Club classes I heard again that their goal is to get Hams on the air to make a QSO. I thought to myself, yes, that is great, and I want to do more, but I know I have made many QSOs in CW on the air, albeit very short and simple ones. So, I was curious how many.
I jumped on the POTA site and looked up my statistics. I was surprised at how may hundred I had, and yet at the same time, I was a bit disappointed. It’s not that I wanted to have made more CW contacts, it’s that I realized that they were ALL from hunting and not a single one was from calling CQ.
So, I changed my goal.
I know that Hams, especially CW operators, are a great bunch of people and they want to see new CW operators succeed, so there is lots of patience when you call CQ. So, I decided to move up my timeline. This was on a Thursday, and Saturday was a likely candidate for a POTA outing, why not–?
Saturday was my birthday, and I knew I could get away with some personal free time in the morning where I could dive in and call CQ POTA DE N5FY. The next day, Friday, I firmed it up, I would head out in the morning, bring the new to me KX2 and see what happens.
Surprisingly, I was much less nervous than I expected, I had told myself that it wouldn’t help anyways to be nervous so just do it and see what happens. I made it to my local park, to the picnic table I frequent, then setup a No Transformer 2-Wire antenna with the KX2. One press of the ATU button and I had a 1:1 match on 40m band.
Of course, I have great timing. I could not believe the stations on the air on 40m. I never did look but there must have been a contest. I moved up and down about 20kHz and there were stations everywhere! I called “QRL?” on 2 different frequencies and had a reply before I landed on open frequency where I could call CQ.
N5FY First CW Activation KX2 Setup
I had not scheduled the activation; I knew I had a bit of cell phone coverage at this park, so I set the CQ POTA message to calling while I posted a spot.
After two calls, I had my first call back. It was time!
I could have freaked out here, but I was too focused on decoding to even be nervous! Of course, I had to send a partial call and a “?” once or twice to get the full call right. Of course, I made some keying errors. But the caller had patience and worked me and we made the QSO. Now I was really excited!
I called CQ and someone sent me back dits and dahs, and I decoded what they were sending! Boy, this was fun! I continued to call CQ POTA, and tried my best to decode the replies, several pileups, and lots of “?” sent by me. But I was making contacts and having a blast!
After a couple of silent CQ calls later, I switched to 20m. And, again, started to get replies back as well as a couple small pileups. In the end, there were a couple call signs that I could not look up, l had a letter or two wrong, but with almost 20 in the log I knew I had an activation and boy was I happy!
N5FY First CW Activation QSO Map
Looking back on the activation, and after talking to another Ham, it occurred to me why I wasn’t as nervous as I thought I might be.
You see, when you are the Activator, when you call CQ, the ball is in your court, you invite people to call back and they are there for you. I almost get more nervous hunting as I don’t want to slow down an activator or run over another caller. But when you are the one calling CQ, it’s your game!
Of course there were several hiccups along the way. For one, it got HOT sitting in the sun. I ended up deploying my hiking chair on the table as a sunshade and pulled a portable fan out of the car. Even the action camera overheated while recording the activation. I couldn’t get the KXPD2 paddle to key the KX2 on 20m when I first got setup. And of course, I had lots of sending errors (although fewer than I expected to have) and sent a A LOT of “?” asking for a repeat.
That said, I am very glad to have jumped in and will continue to activate CW going forward as I continue to build my CW skills. For me, confidence in the ability to Activate on CW is great motivation for practicing, which again, is my biggest learning. If I want to be a good operator, I need to put in the effort, and going out to play radio is one extremely fun way to practice!
If you’ve been reading QRPer.com for long, you’ll no doubt have gathered that I’m [understatement alert] a big fan of the Elecraft KX1.
A couple months ago, a good friend and supporter of this site/channel, reached out to me because he planned to sell his pristine Elecraft KX1. He’s in the process of downsizing his radio inventory in preparation of a move.
He wanted me to have first dibs at his KX1 and I couldn’t refuse. I knew it would be a great unit and I wanted two fully-functioning KX1s.
You might ask, “But wait Thomas, don’t you have three KX1s???”
Yes, this is true.
With this latest addition, I have now have two fully-functioning KX1s (a 3 and a 4 band version) and one other in need of repair. After I make the repair, I plan to give this radio to a friend (one who doesn’t read QRPer regularly) so will be back to two KX1s.
Since Elecraft has discontinued the KX1, they’ve become difficult to find on the market and when they do appear, they often demand a very high price.
That said, if you’ve been looking for a KX1, you will eventually find one. All of my friends who’ve wanted one have put out word and found willing sellers in due time. Elecraft sold quite a few of these back in the day, so there are units floating around out there.
Tuttle Educational State Forest (K-4861)
On Sunday, August 27, 2023, I had an opening to play a little radio and fit in a hike at Tuttle Educational State Forest.
At the time, I needed a little radio therapy and outdoor break: my mom had been admitted to the hospital the previous day (they released her a few days later and at time of posting she’s doing much better).
Tuttle was only a 30 minute drive from the hospital and, as I suspected, I was the only visitor there that Sunday–educational forests aren’t nearly as busy as other NC state parks.
After a nice 3-ish mile hike, I grabbed my radio backpack from the car and started recording an activation video.
My goal was to test this new KX1 and to set up CW message memories.
North Carolina Parks On The Air Activation weekend
Bob (K4RLC)
The first North Carolina Parks On The Air Activation weekend occurred September 9 & 10. Between a limited amount of time available and weather, I only was able to activate three parks, including an over-night camp out. The primary goal was to return to the Dismal Swamp State Park (K-2727) in Camden County. While the Dismal Swamp in Camden County is a rare and sought after County on CW for those wanting to work all 100 North Carolina counties and all 3000+ US counties, it also is a place comforting to my tortured soul.
As there is no camping at Dismal Swamp State Park, one camps at the nearby Merchant Mill Pond State Park (K-2745) in Gates County. This is a pleasant small State Park with canoeing and fishing in a 190 year old millpond, with old-growth Cypress trees. It is near the lower extension of the larger Dismal Swamp National Wildlife Refuge, which begins in Virginia.
As an older park, Merchants Mill Pond SP does not have any hook-ups for water or electricity. Fortunately, I was camping in our Solis campervan, which is self-contained by solar power and good for boondocking.
The oppressive heat gave way to rain, so I set up inside the van at my campsite. This gave me an opportunity to use my new favorite portable radio, the Penntek TR – 45 Lite, a QRP CW only radio. An outstanding feature of this rig is that it has no menus, only knobs and toggle switches, and reminds me very much of my radios from the early 1960s, but with modern specs.
The internal keyer performed well with the Putikeeg magnetic paddle from Amazon. Even though there was distant thunder, I felt it was safe to set up an inverted V on a fiberglass mast, bungee-corded to a trailer mount hitch on the camper van. I ran the RG-174 coax through a rear window by sliding the window screen open a bit.
Not wanting to invite an onslaught of mosquitoes, I only used red lights inside the Solis, reminiscent of military operations. The TR -45 Lite did well on 40 CW with 5 W and the inverted V in the rain, and no mosquitoes invaded the van.
The overall goal was to return to the Dismal Swamp. I started early in the morning, setting up on a picnic table in the park between the Canal and the walkway, along the canal. Even though it was midmorning, the weather became interesting, at 90° F and 90% humidity.
For this activation, I used the old IC 706 MKIIG and a modified Wolf River coil set up. I used the Chameleon 17 foot telescopic whip. This whip is Mil-Spec and has a great feel and quality of workmanship. However it is 11 inches too short for the Wolf River “Sporty 40” coil. To address this, I made an 11 inch jumper from solid copper wire left over from my Dad’s days with Southern Bell telephone, and fitted it on an alligator clip, clipped to the top of the whip. The other modification was not to use the three 31 foot radials. For this activation, I tried the KB9VBR “Magic Carpet” ground plane.
This is a 32 x 84 piece of aluminum window screen, laid on the ground, under the antenna tripod. It may be a dB or so less than the radials, but it sure takes up a lot less space, especially in a crowded parking lot. The key is the Whiterook MK-49 made by ElectronicsUSA. It is my favorite backpacking key, lightweight and withstands being thrown into a backpack with no protection. This set-up worked well both on 20 and 40 CW, juggling CW keying with eating leftovers for breakfast until the rain came.
I then decided to wander on some back roads in Eastern North Carolina and wound up in historic Edenton, originally built in the early 1700s and the first capital of the Colony of North Carolina. Their diverse history is reflected in the town square, where there is a 13 Colony US flag, a monument to the Confederate War dead, and the British Union Jack!
The radio setup was very pleasant at the Historic Site (K-6842) near the Albemarle Sound, which begins at the Eastern North Carolina coast, and runs to the leeward side of the North Carolina Outer Banks on the Atlantic Ocean.
I decided to try the TR-45 Lite again, but this time with a Buddipole on 20 meter CW. Propagation was variable with early contacts in Utah and Idaho, but the band became difficult. It was very pleasant operating with the ocean breeze and looking at the 1886 Roanoke River lighthouse, until the rain started again.
So it was time to pack up, but a return trip to spend a weekend in Edenton would be a very pleasant activity. On the way out of town, I passed a puzzling POTA site, the National Fish Hatchery (K-8007), established in 1898, and home of an Annual Fishing Rodeo. Activating there was tempting, but the rain was prohibitive.
All in all, it was a very pleasant activation for the first NC POTA weekend. I got to test different radio and antenna configurations. I would say for the TR -45 Lite, the inverted-V worked best. For the ICOM IC-706 , the “Magic Carpet” aluminum screen worked very well and was very easy to set up.
I did not have time to do a head to head comparison of the antennas; that is a Fall project. Please note I originally got a stainless steel screen from Amazon, but testing with the Rig Expert showed that it really did not conduct as well as aluminum and had higher SWR, so make sure to purchase the aluminum screen.
For a first NC POTA Weekend, the results were modest and certainly can be improved upon next year. Down east on the Outer Banks, Jockey’s Ridge and the Wright Brother Memorial is on my future list, but an annual pilgrimage to the Dismal Swamp (especially in non-summer months) is a must.
There’s a portable wire antenna design I’ve been wanting to put on the air for POTA and SOTA for what seems like ages: a 20 meter vertical loop.
I mentioned in a Ham Radio Workbench podcast episode a few months ago that I planned to build a field-portable delta loop antenna and that led to a mini discussion about configurations, feed points, height off the ground, etc. and how all of those factors can influence the characteristics and dynamics of the antenna.
Vertical loops are pretty fascinating and incredibly effective.
Delta loops are super easy to build (no more difficult than an EFHW) but this summer has been insanely busy for me and I simply hadn’t gotten around to it yet.
Then my good friend Joshua (N5FY) who runs tufteln.com sent me a prototype 20M delta loop in the mail. We’d been talking delta loops and he couldn’t help but build one. He asked that I take it to the field and put it on the air, then give him any feedback and notes I might have.
Joshua’s design incorporates a 4:1 transformer and was cut to be resonant on 20 meters. I’d actually planned to build one identical to this because the type of loops I’ve deployed at home have been fed with ladder/window line which isn’t as portable as something I could feed with RG-316.
Holmes Educational State Forest (K-4856)
On Friday, September 1, 2023, I grabbed the delta loop antenna and the KX2, then made my way to Holmes Educational State Forest.
I knew that Holmes wouldn’t be busy and that there were a number of options for spots to set up.
After a little scouting, I found a great site to set up the antenna.
I planned to set up this antenna as close as I could to an equilateral triangle with the apex up about 30 feet and the feedpoint in the middle of the base of the delta.
Deploying the antenna in this configuration meant that I only needed one line in a tree to hoist the apex of the delta and two lines to pull out the corners of the base.
I brought along some paracord with tent stakes to secure the base corners of the loop. In the end, though, I simply attached the paracord to trees instead of using the stakes.
I (somewhat reluctantly) made a video of the entire activation including the antenna deployment. I wanted to take my time deploying this antenna for the first time, so the antenna deployment section of the video is much longer than usual.
You absolutely cannot see the loop in this photo, but it’s there…I promise!
In the end though? It wasn’t as difficult as I thought it would be. The last vertical delta loop I deployed was a 40 meter loop which is roughly double the size–in my head I was expecting the aperture to be larger than it was.
My arborist line and 12 oz weight hanging to provide a gentle tension to hold the apex of the loop up.
The 20 meter loop is actually pretty compact and almost as easy as setting up as an inverted vee.
After completing my first POTA Rove, it was time to look for other opportunities. The next day, we planned a trip close to the border between Poland and Germany. Due to the high density of POTA parks in Poland, it was not too hard to find a POTA park for me.
The park Łęgi koło Słubic Nature Reserve (SP-1908) is a floodplain for the Oder River, the border river between Poland and Germany. As described in my previous post, the border was shifted from further east to the Oder river as part of the territorial changes at the end of World War II. Later, Poland was the only country, along with Czechoslovakia, where people from East Germany, i.e., the Soviet-controlled part of Germany, could travel to without permission. This arrangement came to an end in 1980 with the rise of the Solidarność (Solidarity) movement in Poland, a social movement against the pro-Soviet government, and the subsequent declaration of martial law.
J. Żołnierkiewicz, Public Domain, via Wikimedia Commons
After the reunification of Germany in 1990, the border became a kind of ‘wealth border’ between Eastern and Western Europe, giving rise to various issues such as crime and immigration. Following Poland’s accession to the European Union in 2004 and its entry into the Schengen Area in 2007, which involved the removal of all border controls, the situation improved. Now the only thing indicating a border ahead is the black-red-yellow post.
The current rapid pace of development in Poland does not make it impossible to overtake Germany in the foreseeable future.
Back to the activation. I took the following equipment with me:
When going (as in walking) to an unknown park without knowing the circumstances, I like to have the option to choose between an antenna with a small and a large footprint. So far, I have just made a handful of car-based activations. But I increasingly like it as it opens another world with big antennas and bigger rigs. We recently made a test activation with an Icom IC-7300 and a 6-band Cobweb antenna from AWK, by chance also from Poland.
But that’s another story.
Not sure if I have mentioned it: My BaMaKey had a technical issue and I had to send it back to the manufacturer. The repair took just a couple of days and the communication was very smooth and convenient. I was happy to have my favourite key back in time before my vacation.
So after I dropped my family to do their business, I went on and looked around for a nice place. Of course, I had to see the actual border.
Left Poland, right Germany. In the background is Frankfurt (Oder), not to be confused with the more well-known Frankfurt am Main.
The weather looked a bit difficult, but it remained dry.
Eventually, I found a place in a meadow with more than enough space for the SOTABeams linked dipole so I could leave the JPC-12, the ground mounted vertical, in the backpack. In the meanwhile, I am used to the SOTABeams antenna. I can build it alone in less than 5 minutes and – as it is hard to beat a dipole – have a very good antenna for operating QRP.
The activation was difficult. It was a holiday season, a morning during a weekday, and the conditions were tough. After 30 minutes, I had just 4 QSOs. So I asked in the chat groups of my local ham radio club and a German POTA group for help. After 1.5 hours, I ended the activation with 15 QSOs, of which 5 were from the alerted groups. At least the place was nice, and the weather was not as hot as in the days before.
Log Analyzer by DL4MFM / Google Maps
The next day, I wanted to spend some time with my 7-year-old son, and I was looking for an opportunity to combine it with a quick activation. I remembered the bunkers and museums of the Ostwall (East Wall), technically Festungsfront Oder-Warthe-Bogen (Fortified Front Oder-Warthe-Bogen). The structure, spanning 120 km / 75 miles in total, was constructed between 1934 and 1944. It stood as the most technologically advanced fortification system during the era of Nazi Germany, and continues to be one of the largest systems of its kind in the world today. Continue reading Poland Adventures – Part II→
On Sunday, August 20, 2023, en route to check in with my parents, I popped by Lake James State Park for a little early evening POTA fun.
In the car, I’d pack the Elecraft KX2 kit and I still had the REZ Ranger 80 vertical antenna system on loan from REZ Antennas (it’s since been returned to them).
The last time I deployed the REZ was on Mount Mitchell in some pretty sketchy weather. While I recorded a couple of short videos, I didn’t record a full activation video since we were having a family picnic that day.
Before sending the Ranger 80 back, I wanted to fit in a proper activation showing how I deploy the antenna, how I tuned it for the first time, and how it might perform on the 40 meter band.
Lake James State Park (K-2739)
It was golden hour at Lake James and the park was bustling with activity. There were kids running around, parents chasing them, and several families cooking out at the numerous picnic sites.
I sought out a location that was private and quiet mainly because the Ranger 80 antenna has four 31 foot radials, thus a large footprint; I didn’t want children, pets, or anyone tripping on the ground radials.
Fortunately, one of my favorite spots overlooking the lake was free, so I could simply set the Ranger 80 up in the woods where folks weren’t walking.
The Ranger 80 is super easy to deploy: simply extend the vertical, attach it to the top of the base, then attach the stainless spike to the base and plunge the entire thing into the ground. Next, you deploy the four radials and connect it to the base of the antenna.
It only takes a couple of minutes especially since the counterpoises are wound using the over-under method. I simply tossed each line into the woods and didn’t worry if they were all lying perfectly on the ground.
Note to REZ: Consider offering optional high-visibility counterpoise wires–for those of us setting up in busy parks, it would make the ground radials more conspicuous to passersby.
Next, I needed to tune the Ranger 80 for the forty meter band.
Typically, when I use a sliding-tap tuning coil style antenna like this one, I turn on the radio and move the coil until I hear an audio peak, then I fine tune it by sending a “dit” on the radio, checking the SWR, and adjusting the coil slider.
That evening, though, I had my RigExpert AA-35 Zoom antenna analyzer so I set it to continuous SWR monitoring and adjusted the coil until I achieved a good match. Easy.
I should add here that when you use an antenna like this frequently, you learn where the best tap points are on the coil thus tuning becomes easier. My friend Alan (W2AEW) actually made a PVC rig for his coil antenna (click here to check it out).
With the antenna all set up and ready to rock-and-roll, I simply hooked up the Elecraft KX2, my VK3IL pressure paddles, and prepared the logs.
As many readers know, I am on a Parks on the Air (POTA) quest to activate all references in the state of Connecticut. There are 136 parks, and four of them are only accessible by boat. You may have seen my recent field report here on QRPer.com about activating three islands located in the Connecticut River. For those islands, I enlisted professional help from a boat captain with the navigation experience and proper tools (like radar and maps) to access those islands.
The final boat-only accessible island is Minnie Island, located in the middle of Gardner Lake in the town of Salem, Connecticut. I DO have experience kayaking on a Lake, thanks to my uncle, who has two kayaks and has taken me out on Tillson Lake in New York’s Hudson Valley a number of times. Unlike the challenges the river posed, I felt like I could manage the lake on my own. I did need a kayak, though, which I didn’t own.
I had to do some kayak research then. In case you didn’t know this, different kayaks have different specifications on how much weight they can hold. I’m a big guy, six foot five inches tall. Add me, plus a backpack of radio equipment, and I needed to be sure I didn’t sink.
I started on eBay, looking for people selling used kayaks. There are all different kinds of kayaks. Some made for the ocean and dealing with waves and others for casual lake paddler. Some have rudders, some have small, sealed cockpits and some even have motors. I had no idea how serious you could get with all of the accessories and options. I was really looking for something simple.
After striking out on eBay, I found a fishing supply store at the end of the Connecticut River that also had kayaks you could rent. I visited their web site and was happy to see that they were having an end of season clearance sale, where they were selling their rentals. I visited their shop and after looking at my options, I ended up buying an Old Town Vapor 10 kayak. It came with a paddle and life jacket and it was 50% of the price new. A great bargain. The added benefit is now I own my own kayak…a friend suggested that now that I do, there might be IOTA activations in my future.
What sold me on the Vapor 10 was the open cockpit. No trying to squeeze myself in and plenty of room to bring a backpack with the radio equipment in-between my legs. Also, I was able to fit it into my Jeep Wrangler.
Many thanks to Jonathan (KM4CFT) who shares the following guest field report:
A Relaxing Labor Day SOTA Activation
by Jonathan Kayne (KM4CFT)
September 4, 2023
Days off from work can be a really great thing. And for someone who spends most of his time indoors at a computer, I try to find plenty of excuses to go outside and get some fresh air. Labor Day is one of those days I get off from work, so I decided I would do a SOTA activation, but I wasn’t entirely sure where.
Luckily, there are plenty of tools out there to help with planning a SOTA activation, namely sotl.as, which shows all the summits on a map along with additional information about the summit.
I wasn’t entirely sure which one to pick, so I just searched around and came across Evergreen Mountain, which has the reference designator W0C/FR-076. Doing some research showed that it was about a 2-3 mile hike to the summit from the parking lot, which was perfect. The air around Denver, CO can be somewhat thin and these hikes can be strenuous if you aren’t used to it. I have been living in the Denver area for 2 years and I still am not used to it!
After a small amount of planning, I pack my radio and antenna into a bag along with the usual hiking gear and drive to the base of the mountain. There were a lot of cars already parked there, so I had to park on the side of the road. It seems other people had the same idea that I did!
The trail to the summit of Evergreen mountain was comparatively easy due to the trail being designed for mountain biking. Mountains in Colorado tend to be incredibly steep, which can make them quite the workout, even if the hike is short. This trail consisted of plenty of switchbacks, which made the hike incredibly easy, trading steepness for distance. This was a massive bonus from my perspective!
As you might have guessed, Evergreen Mountain (and the town) get their name from the impressive number of evergreen trees in the area. As you drive towards the town, it almost becomes exclusively pine trees everywhere!
As I walked, I couldn’t help but notice all the fallen pine trees, which concerned me, but I quickly came across a sign explaining the reason.
I really got to enjoy walking through these trees, and listening to the wind howl through the mountains. It also had the benefit of keeping me nice and cool in the reasonable 83° temperature outside.
The trees also blocked the views of the mountains to some extent, but my research showed me that we get plenty of gorgeous views closer to the summit!
Right before the summit loop, I was rewarded with a small glimpse of the views that were to come!
I made it to the summit loop trail, and advanced to the last little bit before the summit. Right before the true summit there is a tenth-mile little trail that leads to a scenic overlook. I, of course, had to go and take a look.
I went back and made it to the summit. The top of the mountain was pretty flat so I just went to what I thought was the summit and set up my station there. Searching around showed that I was well within the activation zone. The area had some nice rocks to sit on as well as trees for me to lash my crappie pole to with para-cord.
I unpacked my gear and started to set up. The gear I brought was as follows:
With SOTA, I have the opportunity to use my VHF/UHF equipment to make some QSOs. I find it quite rare for me to do simplex communication on VHF or UHF these days as I almost exclusively operate on HF. Also, I like to try to operate in the parts of the bands with the lowest license requirement so that the less experienced hams have an opportunity to work me. With this, I can give our technicians a chance to chase SOTA! Continue reading KM4CFT: A Relaxing Labor Day SOTA Activation→
Many thanks to Alan (W2AEW) who shares the following guest post:
Radioactive vacation on LBI (Long Beach Island)
by Alan (W2AEW)
We look forward every August to our much needed 2 week vacation “down the shore” as we say here in New Jersey. Our vacation spot of choice is Long Beach Island, one of the barrier islands on the Jersey coast. This is an 18 mile long island that hugs the Atlantic coast of southern NJ, just north of Atlantic City. The part of the island we love to stay in is called Surf City. The Surf City area has been continually populated since 1690, although the town of Surf City was officially established in the late 1800s.
The XYL and I are both pretty fair skinned, so laying out on the beautiful LBI beaches everyday isn’t really our thing.
So, the house we rent is actually on the bay side, facing west, overlooking the Manahawkin Bay. We enjoy sitting back and watching (and occasionally participating in) the wide variety of activities on the bay – the fishing & crabbing, the power boats, personal watercraft, paddle boarding, sailing, etc. Our favorite though, and the thing that keeps us coming back every year, are the awesome sunsets over the bay.
Of course, we always need to find a house that is pet friendly. Sophie loves LBI also, especially the long walks around town with the sea breeze. Here she is waiting at the top of the stairs – hoping to hear the magical word…. “walk”…
LBI is certainly a family and pet friendly place. Even the local Dunkin Donuts has a wall dedicated to the local pets:
I certainly planned to do a fair amount of QRP operating while on vacation – both from the rental house as well as POTA from the nearby parks (more about this soon). But lest you think this was purely a radioactive vacation, let me reassure you that we did a lot of “normal” vacation activities too.
Like most, a lot of vacation is about relaxing, eating, other stress relieving activities, eating, shopping, and of course, eating… Breakfasts were typically some homebaked muffins, or even some fresh biscuits from the oven with some great Black Bear Jam – a gift from a good friend in NC. Yummy!
The main meals were a mix of good ‘ole home cooking and some great local cuisine, including great Jersey pizza from Panzone’s, fresh local seafood from Mud City Crab House and Pinky Shrimp’s Seafood Company. Of course, no trip to LBI is complete without getting some of the best burgers in the state from Woodies Drive In in Ship Bottom, right next to Flamingo Mini-Golf – one of *many* mini-golf places on the island. I’ve personally seen Ray Romano golfing at Flamingo with his family.
I did manage to do some other “normal” vacation activities besides radio… A couple of relaxing afternoons on the beach, completed a 1000 pc jigsaw puzzle, read two James Patterson novels, lounging on the decks overlooking the bay and lots of strolls with the XYL and the dog.
But who’s kidding who, this is a QRP blog right! Let’s get radioactive!
One of the first tasks after unpacking was setting up the antenna at the rental house. The location was great, right next to the bay! I strapped my slip-fit military fiberglass poles to the corner post of the 2nd floor deck, which made a great support for the 40m EFHW wire. This is the same UNUN & antenna that I featured in a “build” video a few years ago. Continue reading Alan’s Long Beach Island Radioactive Vacation!→
QRP radios, product announcements, reviews, news and more. Low power amateur radio fun!
Please support QRPer by adding us to your whitelist in your ad blocker. Ads are what helps us stay online. All of our ads are ham radio related--no junk, we promise! Thank you!
I realize that I’m fortunate, in many ways, that I perform POTA activations at times when parks are relatively quiet: weekdays, mostly, and during that 9-5 window when many are at work. On the flip side, I’m also activating when there are fewer hunters out there.
