Category Archives: POTA

“Return-to-Office Policy” triggered POTA activation

“Return-to-Office Policy” triggered POTA activation

by Thomas (DM1TBE)

I wasn’t sure if I should write a report about this activation. It was “average” at best. But I thought it might be worth to share that not all activations are perfect, with stunning views in an enjoyable environment.

Intro

I am a relatively new ham and completed my first exam in mid-2019. It took me a while to get my head around all the things that the new hobby is offering. My first successful portable activation was in May 2021 on the SOTA summit Michelsberg (DM/BW-855) – here is a picture of my most recent activation some weeks ago:

This first activation was in the middle of the Corona pandemic. The good thing during the Corona time was certainly the possibility to work from home. Before Corona, I did commute roughly 65 km / 40 mi (oneway), which took me in total 2–3 hours daily. During the first two years, I was in the office two times. In the third year, I was there more often, maybe once every two months.

Two weeks ago, my employer announced a “return-to-office” policy, so the “sweet life” was coming to an end.

After the first disappointment, I thought that this may offer me the chance to work portable at new locations. The next SOTA summit is around 20 km / 12 mi away, but a POTA park begins 2 km / 1.2 mi from the office at the pin in the map below. The park is basically all the green wood in the center of the map.

That comes in very handy, as POTA, with the possibility to operate next to my car, does make it easier than hiking in suit and tie to a SOTA summit.

The Nature Park Schönbuch, POTA DA-0008, located southwest of Stuttgart, is a wooded area of 156 km² / 38,000 acres. In 1972 in became the first nature park of the federal State of Baden-Wuerttemberg. The park is an important recreational area for the region.

Image by Cactus26 – Wikimedia Commons – CC BY-SA 3.0

Activation

Right at the beginning of the park, when coming from my office, there is a parking place and next to it a clearing with a fireplace. I thought that this would be a perfect spot for my activities. Weather was cold and windy on my first “return to office” day, I did not expect too many people to be there.

After working and reading the article about the 2023 QSO Today Virtual Ham Expo, I decided to leave the office early at around 4pm and started my activation.

The parking place at the park was pretty empty, just one old car with four lads in it and doing whatever lads are doing in the woods. I have a 16-year-old son and have given up trying to understand what boys at that age are doing.

The spot was OK, but not as perfect as I had thought. It was in a trough surrounded by large trees. In addition, it was wet, cold and windy.

Due to the wind, I have decided against the 10 meter / 33 ft pole and used the PAC-12 again.

The actual activation did not go as smoothly as my previous one. It might have been due to the time, and afternoon during the week, or the topographical conditions. With a small foldable seat and a tiny desk made of a trunk and a brick, I operated for 40 minutes.

In total, I made 16 QSOs; 10 on the 30-meter band and 6 QSOs on 20 meters.

Although I made a successful activation of the Nature Park Schoenbuch, DA-0008, I think I need to change my plans. Being in the office and therefore close to this park more often in the future, I will be more picky in terms of weather and location. The park has way more to offer than a wet and cold meadow in the middle of the woods. I will look for better weather and locations, such as the following – I just need to find those places.

Image by Martin Rathgeber – Wikimedia Commons  – CC BY 2.5

Postcard Field Report: Cheap POTA thrills with the TEN-TEC R4020 and Chelegance MC-750

Welcome to another Postcard Field Report!

My Postcard Field Reports are information-packed, just slightly more concise and distilled than my average field report so that I can publish them on a busy day.

T-T R4020

One of the least expensive radios I’ve ever purchased is my TEN-TEC R42020 two-band CW only radio. I believe I paid $120 for it (shipped!) a couple years ago and it sat on my shelf unnoticed for months until I took it on a POTA activation last year.

Here’s the admission:  I really love this little radio!

It is not a feature-rich radio, and the sidetone sounds like a 1080s handheld arcade game, but it works a charm! The receiver and audio are fantastic and it sports two of my most useful POTA/SOTA bands: 40 and 20 meters.

What’s not to love?

POTA time!

I had an early morning doctor’s appointment on Thursday, February 23, 2023. As a little reward  for doing my annual physical I decided to add a POTA activation to my morning. This was a last minute decision, so only a couple minutes before leaving the house that morning, I grabbed my TEN-TEC R4020, the Chelegance MC-750, and my Spec Ops Backpack (filled with all other field accessories), and I hit the road!

I chose the MC-750 that day because I needed an antenna that could be configured to be resonant on 40 meters since the R4020 has no internal ATU. That and I couldn’t remember if I’ve configured the MC-750 for 40 meters in the past. I know I’ve deployed the MC-750 with the 40M coil, but I think I may have used an ATU to match it.

I arrived at the Blue Ridge Parkway (K-3378 NC) mid-morning and set up in very short order. Continue reading Postcard Field Report: Cheap POTA thrills with the TEN-TEC R4020 and Chelegance MC-750

QRPer Notes: 3Y0J Presentation, BitBanger Demo, POTA Developers Live, and Georgia State Parks On The Air Event!

Because I receive so many tips from readers here on QRPer, I wanted way to share them in a concise newsletter format.  To that end, welcome to QRPer Notes, a collection of links to interesting stories and tips making waves in the world of radio!


Adrian Ciuperca (KO8SCA):  3Y0J Presentation to the Northern Illinois DX Association

Many thanks to Eric (WD8RIF) who shares this excellent presentation by Bouvet activator, Adrian (KO8SCA):

 Click here to view on YouTube.


BitBanger Demo

Many thanks to Benn (AK4AV) for sharing this video demo:

Click here to view on YouTube.

Click here for the Github page and more notes/details.

Ask the POTA Developers – LIVE!

Click here to view the archived live stream on YouTube.


Georgia State Parks On The Air: April 1-2, 2023

Many thanks to Scott Wooten who shares the following announcement via YouTube:

Welcome to the Georgia State Parks on the Air event. Our goal is to have all fifty Georgia State Parks on the air in one weekend. This event is open to all licensed Amateur Radio Operators whether you live in Georgia or not.

There are two ways to participate: Activating or Hunting. Activators fall into two different categories: Single Operator or Club, and there is a special category for Georgia ARES operations.

The first annual 36 hour event kicks off on April 1, 2023 at 1200 Zulu and concludes at 2359 Zulu on April 2, 2023.

If you participate please remember this event is considered a CONTEST, so while casually operating Parks on the Air on the WARC bands is permissible, this event does not allow operations on the WARC bands.

For more information or to sign up as an activator, go to GAPARKS.org

We look forward to hearing you on the air!

Click here to view on YouTube.

Breaking in the new Elecraft AX2 during a short POTA activation

As I mentioned in my recent AX1 vs AX2 video and blog post, I purchased an Elecraft AX2 antenna and bi-pod in late January (note: two days before Elecraft announced their February ’23 sale price! Doh!).

I received the AX2 package a few days later and I was certainly eager to take it to the field.

My first opportunity came on Tuesday, February 14, 2023, when a short activation window opened up in the afternoon.

Zebulon B. Vance Birthplace (K-6856)

One of the first things I noticed after taking the AX2 out of the package is just how solid and compact it is. The AX1 is short, but the AX2 is a few inches shorter because the base is more compact.

Unlike the AX1, the AX2 is a mono band antenna, thus the coil only needs to accommodate one band. When you receive a new AX2, it’s configured for 20 meters out of the box, but the user can modify the coil to work anything from 20 to 6 meters.

“Resonant-ish”

Even though I mentioned this in my AX1 v AX2 article and video, I’d like to reiterate that the AX2 is nearly-resonant on 20 meters. It is not reliably resonant.

I’ve still been receiving a lot of messages from readers stating that their AX2 and AX1 are resonant on 20 meters, so they don’t pack any sort of matching device in their field kit. They simply hook the AX2 up to their little QRP radio and hop on the air.

While it’s true that these antennas may provide an acceptable SWR most of the time, you really can’t rely on a solid, reliable match as you could with an end-fed half-wave.

I’ll repeat what I mention in a previous post:

Small verticals like the AX1 and AX2, that use coils to electrically “lengthen” the antenna, have a higher Q than, say, a large aperture quarter or half wave antenna. In practical terms, this means that the window of resonance is narrow and more fickle than, for example, an end-fed half-wave.

A lot of factors can affect the SWR on higher-Q antennas like the AX1/AX2 including:

      • the type of terrain,
      • height off the ground,
      • length of counterpoise,
      • configuration of counterpoise,
      • and, most notably, the operator’s own body capacitance.

You may find that the AX2, for example, is natively resonant on 20 meters at one location, but isn’t at another location. This is quite normal. It’s also the reason why Elecraft states that both antennas are designed to be used with an ATU.

So there you go! If I hook up my AX1 or AX2 to a radio, I’ll always have some means of matching the impedance–either an external ATU, or a capacity hat. You can also tinker with the length of the telescoping whip and counterpoise to tweak the match.

The important part–especially if pairing these antennas with a radio that lacks both an internal ATU and SWR meter (say, the MTR-3B, G106, or TR-35)–is that you’ve some means to check the SWR before conducting a long activation session. Continue reading Breaking in the new Elecraft AX2 during a short POTA activation

How I found the best antenna for my SOTA/POTA activations

How I found the best antenna for my SOTA/POTA activations

by Thomas (DM1TBE)

Intro

Until January this year I had a German “Klasse E” / CEPT-novice amateur radio license (equivalent to the US General Class), which limits the use of HF to the 10-,15-, 80- and 160-meter bands. When I started with SOTA I used homemade single band end-fed antennas most of the time. However, that is only feasible for the 10- and 15-meter bands.

Unfortunately, both bands are very moody and sometimes they have not worked at all. Unlike the UK for example, FM is uncommon for SOTA in my home association DM (i.e. Germany Low Mountains). You can be lucky and get your 4 QSOs, but I did not want to rely on pure luck.

Therefore, I bought an end-fed half-wave antenna for 10-, 15-, 20-, 40- and 80-meter bands, after some experiments with 10-80-meter end-fed half-wave antennas, from a small German company called ANjo.

Although I could not use the 20- and 40- meter bands at that time, the EFW80-10P (en: auto-translated) antenna gave me the possibility to use the 80-meter band. The antenna could also be tuned for 15. It has a mechanical length of 23.6 m / 77 ft and a coil for the 80-meter band. It is pretty lightweight with 0.4 kg / 14 oz and allows up to 30 watts PEP – more than enough for me. 80-meters is not the best band for daytime SOTA activations, but in 21 months doing SOTA activations, it worked 37 times and tipped the scales for an activation from time to time.

It was sometimes a bit tricky to raise the long wire into the air, but it always worked … better or worse …somehow … like here in the woods along a trail.

In January this year, I upgraded my license and a new world of HF-bands opened for me. Although I have learned a lot about propagation for the exam, I am in favour of a German saying: “The difference between theory and praxis is larger in the praxis than in the theory”. Continue reading How I found the best antenna for my SOTA/POTA activations

Field Report: More Xiegu G106 POTA time and I rope in Brooks to log!

On Friday, February 10, 2023, I had a hankering to fit in a POTA activation that morning. South Mountains State Park was an easy detour on my drive back to the QTH, so I scheduled an activation.

I’d also been meaning to meet up with Brooks (KO4QCC). Brooks started his POTA journey not even one year ago–here’s a field report from his first SSB POTA activation.

Brooks has been steadily working on his CW skills and is dangerously close to doing his first CW activation. We’ve managed to set up one late evening casual CW rag chew and I think his CW chops are very good.  We plan to do more evening rag chews when our schedules align. He’s made amazing progress.

I contacted Brooks that Friday morning and he was game to meet up and do some POTA. He wasn’t quite ready to do a CW activation, so I suggested he log for me using the HAMRS app on my iPhone. I find that logging for CW ops during past Field Days really helped build my own confidence before I started using CW daily.

Brooks was 100% game to log for me.

And let me just say what a luxury it is to have someone log to HAMRS for me on my iPhone! It frees up my brain to simply log on paper (which I always do) and enjoy working stations without the extra busy work! Hat tip to good ole’ Brooks.

South Mountains State Park (K-2753)

I arrived at South Mountains State Park (the Clear Creek Access), put on my hiking boots, then Brooks pulled into the parking lot only a few minutes later.

We agreed in advance to fit in a quick hike up the Clear Creek Trail prior to the activation. I, for one, really needed to stretch my legs!

After the hike, I grabbed some gear from the car and we set up at the one picnic table at the Clear Creek Access.

Brooks and I both had commitments that day so could only play radio for 45-60 minutes max including set-up and take-down.

I deployed the same antenna I’d used the previous day: MW0SAW’s homebrew EFHW on a SOTAbeams winder.

Deployment didn’t take long–since the 40M EFHW is resonant on both 20 and 40 meters, there was no need for an external ATU. I powered the G106 with a 3Ah LiFePo4 battery via my Ham Radio Workbench DC Distribution Panel. Continue reading Field Report: More Xiegu G106 POTA time and I rope in Brooks to log!

AX1, AX2, DS-1, HFJ-350M, MFJ-1899T: Compromised portable antenna strategies vary by location

Many thanks to Terry (N7TB) who sent the following question by email and has kindly agreed to allow me to share it here along with my response on QRPer:

Hi Thomas,

I cannot tell you how much I appreciate your POTA videos and all the suggestions you have made that I have adopted. I look forward to every activation you put on video. […]

[…]I have a question for you about using your AX1, and would really like your advice. I marvel at how quickly you can activate a park even with an AX1 antenna on 5 watts. I also have an AX1 antenna, counterpoise and KX2[…].

Anyway, I was out today activating K-0213, Maude Williamson State Park, about 20 minutes from my QTH in West Salem, OR. I operated 12W into a 33ft. EFHW antenna suspended vertically from a 31 ft. Jackite mast. All my activations are CW; I usually activate 20 meters.[…]

I was able to finally work 22 stations in an hour and a half, mostly in CA, UT, MT, and one in AZ. I did get a contact in KY, AZ NM, and MB, but it was a tough go for them to hear me. Most of my activations take me a bit over an hour to get 20 contacts.

As I thought about how much easier it seems that you are able to activate, I started to think about geography and population density differences between the East and West coasts. I used Google Earth and measured almost all points east of the Mississippi from Asheville and most were within 1200 miles. I would guess 2/3 of the US population live in this area. I drew the same range from my QTH and I get about half way into MT, barely into WY, most but not all UT, just touch the NW corner of AZ, and all of CA. In all but CA, I would guess the population total in this vast area is less than Illinois. That is my dilemma. I would love to be able to go out, setup my AX1 with my KX2 on even 10 watts, and make quick activations, but I would be surprised if I would get many contacts because the distances are so vast in the West and population density so low. I will actually try using the AX1 when the WX gets better and I can sit at a picnic table. So far, I have had little success with it, even deployed with the correct counterpoise. Do you have any thoughts on how to be successful with the AX1 from the West coast for POTA, or should I just concentrate on other antennas?

[…]Thanks again, Thomas, for the emails you have sent me with suggestions about equipment, and for all your great videos.

Very 73,

Terry

N7TB

Hi, Terry,

First of all, thank you so much for the kind words. I really appreciate that!

Regarding your message:

Keep in mind that the day you were operating was a very strange day in terms of propagation. There were times when we were having radio blackouts (especially in the western half of the US) and there were times propagation was amazing, yet very unstable. We were hit by so many heavy CMEs this weekend–one seemingly on top of another.

I think you do have a valid point, though, about the geography–one I try to mention when talking about compromised antennas like the AX1.

QSO Map from my latest AX1 activation.

I realize that I enjoy a lot of success with the AX1 because of where I live. I guarantee that the bulk of the US ham radio population is within easy reach of my AX1 antenna, no matter what band.

For you? There are no hams to your west (within easy reach), extremely few to your north (save WA and BC), and the best ham density is to your south in California.

In your shoes, here’s how/when I’d try using the AX1 (keeping in mind I’ve never operated POTA in the western states):

First, I would focus on using 40 meters when the band is healthy and/or for early morning, late afternoon/evening sessions. That should snag contacts across WA, OR, and CA with the AX1. Might be a stretch for southern CA, but I think you could make that work. The only caveat is that flaring has been wiping out daytime 40 meters a lot lately. You might check band conditions in advance.

I would also consider spending time on 17 meters, and possibly 15 meters with your AX1. This might throw your signal across to the midwest, Ohio Valley, and beyond. 17 and 15 meters isn’t typically as productive as 20 meters (at least, for me) but I routinely log west coast stations on 17 meters with the AX1. 15 meters is also getting a lot of attention in the POTA spots!

A wire antenna is almost always a better option than the AX1 if you have the time and space to put it up, but the AX1 is just so darn convenient.

Cheers,
Thomas
K4SWL

More suggestions?

The reason I asked Terry for permission to post his question and my reply here on the blog is because I suspect there are west-coasters (and those in similar geographic situations) who may be able to share some helpful strategies.

There are so many factors involved beyond what I mentioned in my reply. In fact, I imagine if the goal is to work parts further east, then adjusting the activation schedule for Central and Eastern time zones might also help (for example, not activating during dinner hours when I always see a bit of a lull in hunter activity).

If you have some experience, please feel free to comment!

Giving the Xiegu G106 a thorough workout at Fort Dobbs!

On Thursday, February 9, 2023, a rare opportunity opened up for me: a 3.5 hour activation window–!

I was visiting and helping my parents in Catawba County, NC, so considered the park options, almost all of which are within a 35-45 minute drive.

I thought about fitting in two shorter park activations that day, but it has been so long since I’ve had the opportunity to simply hang at one park and play radio for more than an hour, I chose the extended activation option.

Although the forecast was for clear skies that day, a front was moving through that afternoon and the skies were overcast with gusty winds. I could tell rain was a very real possibility, so I chose a site with a picnic shelter to make things a bit easier.

Fort Dobbs State Historic Site (K-6839)

Fort Dobbs was a no-brainer: not only was it the closest park (thus less travel time eating into my on-air time), but the staff there are very POTA-friendly, the site is quiet, and they have an excellent shelter that I suspected (due to the dodgy weather) would be unoccupied.

When I arrived on-site, I checked in at the visitor’s center to make sure the picnic shelter hadn’t been reserved. Fortunately, they said I could have the shelter all to myself!

I had a number of radios in my car and decided en route that I would use the Xiegu G106 once again.

I packed the G106 in a waterproof Husky radio gear box I keep in my car trunk/boot. I grabbed it and my Spec-Ops EDC pack and carried it to the picnic shelter.

My plan was to pair the G106 with MW0SAW’s 40 meter EFHW antenna.

This would give me two resonant bands (40 and 20 meters) so there’d be no need to connect an external ATU. Continue reading Giving the Xiegu G106 a thorough workout at Fort Dobbs!

Guest Field Report: Germany has a new POTA activator!

My conciliation with Parks on the Air

by Thomas (DM1TBE)

Intro

POTA and I had a very one-side relationship so far.

Roughly a year ago I tried to activate a park, but although I spotted myself, I had not been able to make a single QSO. In April last year, I tried it again, with the same result. Luckily, I was on a SOTA summit and spotting me on SOTA brought me enough QSOs to make it a successful activation for both, POTA and SOTA. So I decided to disregard POTA and my only POTA activity was watching Thomas (K4SWL) nice videos on YouTube.

My bad experience with POTA was probably due to two factors:

  1. I only had an intermediate license previously, which limited me on HF to the 10, 15 and 80 meter bands and
  2. POTA was no as popular in Europe and Germany in particular as it was and is in the US. While SOTA and the Flora & Fauna program already had a very active community in Europe for years, POTA had a hen and egg problem.

However, with the increasing popularity of portable operations, POTA has also gained some traction in Europe. I have the feeling that every time I take a look at the spots on the POTA website, I see more European stations.

Things here in Germany have changed for the better, too. POTA got a German website (parksontheair.de) and a community called “Draussenfunker.de” (“Outdoor ham”) with website + Discord that became very active with those pursuing outdoor activities in general and POTA in particular. Lately, local POTA coordinators have been named, who started to add new parks to the program.


Photo by Carsten Steger CC BY-SA

I thought suggesting a recreation area close to my home would be a good idea. A few days later I had the brand new POTA park DA-0410 30 minutes away. The park has a size of 6.3 km² / 1,567 acres and a peak elevation of 780 m / 2559 ft, which is also the SOTA summit Kaltes Feld (DM/BW-659).

My plan was to operate from the clearing on the top plateau, where there is also a mountain hut with restaurant. The 2 km / 1.25 mi trail was not very difficult with an incline of just 105 m / 344ft as the parking area is already at an elevated level.

Although the park extends to the proximity of the parking area at the Hornberg gliding airfield, I wanted to be in the SOTA activation zone due to my bad experiences with POTA activations. The gliding site was founded nearly 100 years ago.  After the First World War, the Allies largely banned motor flight sports in Germany, so gliding airfields, such as this one, popped up across Germany. Continue reading Guest Field Report: Germany has a new POTA activator!

Lunch Box POTA: Pairing the Elecraft AX1 with the Penntek TR-45L!

As I mentioned in previous posts, I’ve been using the Elecraft AX1 in heavy rotation this year. I made a commitment to myself to do a string of activations with it in January and February and also pair it with a wide variety of radios beyond the Elecraft KX2 and KX3.  So far, I’ve paired the AX1 with the:

In truth, the AX1 can be paired with any radio when you use a tripod mount.

It’s a bit trickier when connecting the AX1 directly to a radio and using the Bipod as a support because 1.) the antenna connector on the radio mustn’t be too high off of the surface, 2.) there needs to be enough clearance on the back of the radio to accommodate the bipod legs and 3.) ideally, it’s nice to have a ground point on the radio, else you’ll need to clamp the counterpoise to the shield of the BNC connector.

In addition, if your radio doesn’t have a built-in ATU of some sort, then you’ll also need a capacity hat or external ATU to finish off the impedance match. (For more notes about the AX1 and AX2, check out this previous post.)

Of course, you don’t have to use Elecraft’s bipod to support the AX1 when directly connected to a radio–you can build or 3D print your own support–but the bipod is really convenient when it does work.

Objective: Lunch Box Radio

One radio I’ve been eager to pair with the AX1 is the Penntek TR-45L.

Why? Because I love the form-factor.

Something about having a lunch box-sized radio sitting on a table with a telescoping whip protruding out the back and, with that combo, the potential of making contacts all over the globe. Continue reading Lunch Box POTA: Pairing the Elecraft AX1 with the Penntek TR-45L!