Many thanks to Christian (IX1CKN) who shares the following field report:
POTA in the hills of Tuscany
by Christian (IX1CKN)
The beauty of the POTA program lies in the fact that, even if you’re not in your region, you can still participate and, in fact, feel somewhat at home even from a distance.
So, Sunday 7th April afternoon, while in Florence, given not common family commitments, I took two buses bound for Fiesole and then walked about twenty minutes to reach reference IT-1396, Monte Ceceri Park.
The concept of a peak at 414 meters above sea level might make a Valdostan smile, because it’s less than the center of Aosta, the place where I usually live, but the view of Florence and its surroundings is priceless and truly breathtaking.
Moreover, as reminded by a monument on the clearing at the summit, the mountain was the stage for Leonardo’s first flight experiments, which adds charm and historical interest to the location.
I set up the equipment I managed to bring with me on the trip: Xiegu G106 and a quarter-wave vertical on the ground, with about ten radials. Not more, but the truth is, more isn’t necessary.
The less than stellar propagation on the higher bands led me to mostly stick to 20 meters, even though they were hyper-populated for the SP contest. However, well, I found a corner with sustainable crowding…
The final log shows 30 QSOs in just over an hour and a half, including various park-to-park contacts (including Nicola IU5KHP, national POTA manager, and Andrea IW0HK).
Unfortunately, an unsuccessful attempt with Dario IZ3QFG, but there will be other opportunities.
No overseas contacts, but I repeat: it’s not about quantity or distance, but the fact that being able to reach a reference by public transport and walking is priceless. It manages to give one that feeling of familiarity – amplified by the voices of those you connect with, amazed to find yourself in a park far from home – which is why it’s no surprise that Parks on the Air is growing!
Our local club runs a repeater network with a dozen repeaters connected hub and spoke style on UHF links. It covers an area approximately 42,000 square kilometers (16,200 square miles) in Southern Alberta. I help to maintain that network and am constantly learning from the smart people that put it together and fix it when it goes awry.
On a Sunday afternoon, in mid-March, I discovered that our club’s VE6HRL repeater at Longview Alberta wasn’t passing audio back to the network, only carrier and some white noise. Local audio was passing along just fine, so the issue is either with the controller or the linking radio. A plan was struck for a service call and to activate this summit at the same time.
Given the repeater is located on Longview Hill, SOTA entity VE6/RA-174, and it is on private land, this summit cannot be activated unless we have reason to be there. Performing repeater maintenance gave us that reason, and so I enlisted the help of Canada’s first double GOAT, VE6VID, to come along with me as it’s a 2 person job to remove a repeater from the rack. We’d activate the summit after the work was complete.
So, on a Sunday morning late in March, the two of us set out in our respective 4x4s to crawl up the road to the summit. In the event you’ve disremembered, I’m in shape -round- and, as a result, my favourite type of SOTA to do is a drive-up. For our repeater sites that are on top of summits, we always bring along two vehicles in case one has mechanical difficulty or gets stuck in the snow. Yes, we have used snowmobiles to do service calls in the past!
The road on the north side of the hill runs up through small valley and does not catch much sun, so the recent snowpack proved to be a small nuisance as we crawled forward. That small nuisance became medium-grade once I got stuck due to lack of forward momentum. A couple of backside-puckering moments later I backed down the hill to take a run at it with more speed and more potty-mouth. Success and no digging with snow shovels was involved.
View from the summit looking West-by-southwest
We arrived at the summit and the view was breathtaking! There were only a few clouds in an otherwise vibrant blue sky, and with the 4″ of snow on the ground it was simply VERY BRIGHT OUT making both of us wish we had darker sunglasses! We entered the repeater building and performed some simple testing in situ and then I powered off the repeater and we removed the gear from the rack and put our tools away a half hour after we arrived. Now we can do SOTA!
The activation zone is quite large at this site and Malen drove a few hundred metres away to set up, providing needed separation between us. He set about to do his thing and I did the same. I brought out my crappie fishing rod/mast and propped it up along the barbed wire fence and set about putting out my VE6VID 66′ EFHW. The folding lawn chair would serve as a table, and a nearby metal cabinet that houses phone lines would hold my Contigo mug and two video cameras.
EFHW running parallel to the fence. The tower is straight in real life, but my camera was not!
With the antenna oriented to the west and sloping downwards and parallel to the very old barbed wire fencing (I call it Tetanus fencing given it’s age and your need for a booster shot if it should puncture your skin), I was uncertain how it would perform. As it turns out I had no cause for concern as I was able to make contacts without too much trouble. I trudged back up the hill to the now-placed lawn chair and finished my set-up.
My “desk” for the activation
I evaluated the bands by listening briefly on the FT8 frequency for 10, 15 and 20m. For me it’s a quick measure of how active the bands are, and dialing off a few kHz or so will reveal how noisy the conditions are. I settled on 20m. Aaand right about then, as if I needed another distraction besides the Canadian Rockies staring me in the face, my HamAlert went off on my phone; regrettably I was unable to hear my friend N4JAW at his activation. As it was too cold to handle my cellphone for typing and spotting, I set about getting spotted via SOTAmat and got on the air. Continue reading SOTA: First activation of VE6/RA-174→
(Note: I cut my Florida POTA trip short as I needed to take care of some personal business. I apologize for the change of plans and the inability to communicate that to y’all. I appreciate everyone’s support of the trip and the QSOs of those who hunted me. Articles will be forthcoming for those activations in the near future.)
Those of you who have followed my journey on QRPer know that I wrote an article about my kit for the trip I took last summer to Nova Scotia. Since then, what ham radio equipment I take with me has changed, partially because I am not flying to a different country far from home and partially because of my experiences with what I generally do and don’t need. I thought I’d share what my kit currently looks like for the spring-break Florida trip.
Here is a photo of what ham radio-related gear I am taking on my Florida POTA trip. We’ll first look at what I have in each section of the Elecraft bag I take with me and then a few items that do not fit in this bag but are still along for the ride.
When I purchased my KX2, I also purchased the Elecraft bag. Though the bag is bulky in its profile, it was a worthy purchase due to the amount of stuff it can store in one place in a well-organized manner.
The bag has three compartments.
In the first compartment is my main man, Craig, my KX2. He is the rig I use for all my QRP adventures out and about. I do have a protective cover I purchased for him but haven’t installed yet. I have a fear of messing with electronics and, though installing the shield isn’t rocket science, the project seems overwhelming enough that I haven’t tackled it yet.
Also in this first compartment are my throw bag containing an arbor line and throw weight, some S-carabiners, my homemade radials for the AX1, the tripod mount for the AX1, and a pencil and earbuds. I find I copy CW much better when I have a headset of some sort.
In this compartment, I used to have a back-up key. However, in its place is a new single-lever paddle from CW Morse [QRPer affiliate link]. I am using this key because it is wired to be a cootie or a paddle via an internal switch. I discovered my KX2 doesn’t balk at using this key like a cootie unlike when I use the CW Morse SP4. I desire to use QRP for more than POTA, specifically for SKCC and calling CQ for ragchews. SKCC requires a mechanical key and, as the cootie is my favorite key, this new key should fill the needI discovered the last time I visited Skidaway Island.
In the second compartment, I have the AX1 and the Tufteln EFRW antenna. Those of you who have read my articles know I generally deploy the Tufteln EFRW antenna. On this April Florida trip, I plan to use the AX1 and the Chelegance MC-750 more often in preparation for my summer POTA trip. I anticipate I’ll be limited by terrain and park rules from deploying an antenna in a tree so more experience with verticals will be helpful.
In the third and final compartment are some odds and ends: neon pink flagging tape, an allen wrench for adjusting my CW morse keys, some twine, a short length of wire with an alligator clip on the end, two shock bungee cords, the cord for my CW Morse single-lever key, and a splitter for the headphone jack. I’ve used all these items (except the cord for the new key) at one time or another so I don’t want to leave the house without them.
Here are items I am also taking that don’t fit in the Elecraft bag.
The Tufteln kneeboard, POTA flag, and a notebook. I really like using pencil and paper for my POTA logs. I hold my key in the left hand and send with the right. For some reason, juggling that with paper is more manageable to me than logging in my phone or a laptop. The one thing I miss out on by doing that, though, is not knowing people’s names except those I’ve encountered many times. (And even then I forget names in the busyness of an activation so if I do, please forgive me.) I like to thank people by name at the end of the QSO rather than just their call sign if I know their name. I learned to do this in SKCC exchanges and I think it is a respectful and genteel practice. The one advantage I see to using a logging program is that I could do that with every QSO.
In a Tom Bihn bag, I have my RG-316 coax in three lengths (10’, 20’, and 50’), a short bungee cord, a stereo connector, and a newer version of the SP4 (aka The Minion).
Also coming along for the ride is the Chelegance MC-750. [QRPer affiliate link]
The last pieces of equipment I am bringing are for the first park I will visit – Lafayette Wildlife Management Area. In areas that allow hunting, Daisy and I wear blaze orange, even in the off season. Though as hams we try to be law abiding, we need to remember there are others out there who are not. When it comes to areas in which hunting is allowed, it is wise to wear blaze orange year-round because hunting violations due happen.
There you have it – the POTA Babe’s current QRP kit. I have one last question to address in this series – how I plan my trips. To find out, stay tuned…
Many of you QRPer readers know I am headed to Florida the first week of April for POTA. This will be my first POTA trip on my own. Of course, I’ll have my trusty POTA pup Daisy with me as there is no way she’d want to miss such an adventure. My previous trip to Florida with my brother in December 2023 gave me a better idea of what I need and how to streamline my routines for such a trip.
I am a divorced, single mom so I will not be staying at a hotel or Airbnb but tent camping because that is less expensive. I found staying in state parks during my last trip a pleasant experience. Most people camping at a park are friendly but mind their own business. Traveling as a single woman could be a fearful endeavor but being with a dog and in a campground full of people makes that endeavor doable.
I thought I’d share what I am taking in case there are other aspiring POTA Babes (or POTA Dudes for that matter) who are up for the same kind of adventure. So, let’s dive into my equipment.
An overview of what I am taking
[Note: All Amazon links are affiliate and support QRPer.com.]
Shelter
I have a Sierra Designs two-person tent I purchased nearly 30 years ago. That tent was used for a summer cross-country road trip my brother Joseph and I took. Though Joseph and I used a four-person Ozark tent of my parents’ for our December Florida trip, I like the features of the Sierra Designs tent better – the grommets for holding the tent poles, three instead of two tent poles which makes for a more stable design, and tent poles that don’t pull apart easily as you move them through the sleeves on top of the tent. My Sierra Designs tent does not have a dedicated slot for inserting an extension cord into the tent but I’ll make do running it in through the corner of the door.
Tent without rainfly
Sleep is of paramount importance so I use a LuxuryMap Thermarest and it is well worth it. How do I know? This sleeping pad has been my bed for the past six months so I have lots of experience with it. Being in the townhouse now, I could certainly purchase a bed but I’ve become so used to sleeping on the floor, I actually prefer doing so now. My other sleep items are a Northface sleeping bag and a Sea-to-Summit inflatable pillow. Daisy has a sleeping padand bag of her own from Ruffwear.
The last items rounding out my shelter set up are a brush/dust pan, a mat to minimize sand/dirt getting into the tent, and a head lamp.
Sustenance
A confession – I dislike spending time in the kitchen so I keep my meals as simple as possible. To save money, I make my own meals. I learned last December it is easier to pre-package the meals before the trip than to take larger food containers from which to make the meals during the trip.
Breakfast is simple – oatmeal, cranberries, nuts, and protein powder with hot tea to drink out of a large thermos for the morning. Dinner is also simple – noodles, canned chicken, a canned vegetable, and shredded cheese with hot tea to drink once again. For lunch, I snack on fruit or protein bars.
I purchased a new stove – the SOTO Windmaster – for the December trip after reading reviews of backpacking/camping stoves on Gearlab’s website.It was easy to use and quick to bring water to a boil in which I cooked our food. I do not like using gas appliances; however, lightning the stove provided simple and I never felt like I was going to fry off my eyebrows from the flame.
I also have a spork, can opener, dish soap, towel, fuel canister, and lighter to ignite the fuel for the stove.
I debated about bringing a cooler. If one is going to use canned food and does not anticipate using the entire can, obviously the food has to be safely stored overnight. I visited Gearlab again for cooler reviews. The RITC Ultralight 52 quart cooler is a Best Buy and received a 70 rating, only 8 points down from their top rated cooler – the Yeti Roadie 60. But what a price difference – $450 for the Yeti and $210 for the RITC. I realized I didn’t need a 52 quart cooler and looked for something smaller. There is a 32 quart size which is only $140. Sold! In tests, the RITC 52 quart cooler kept items cool for 6 days, long enough to last on my trip.
Power
We live in a world of gadgets and those need to be powered. I purchased a Jackery 300 Plus portable power station for my last trip even though I had access to the RV power outlets. This little unit is sweet! It charges items quickly, is quiet, and has a solar panel option for recharging if you do not have access to an outlet.
For my upcoming summer trip, most of the places at which I’ll stay will not have power available so the Jackery will come in handy. I will purchase a car charger to assist in recharging the unit while driving on that trip.
extension cord in campsite power connection in Florida Dec 2023
Niceties
While lounging around camp, it is nice to be able to sit. I possess a Helinox chair I use during activations when the weather is warm outside. But I don’t want to use that in the tent due to the flooring and low ceiling height. I found on the December Florida trip not having something to support your back while operating or reading or typing up a report, to be taxing. Therefore on this trip, I will use the Thermarest chair made to use with my Thermarest sleeping pad.
from Thermarest website
If you are going to spend time outside, you will share the space with insects. Several of the trails I want to walk with Daisy warned about mosquitoes and ticks. To protect me, I will spray my clothing and tent entrance in advance with Sawyer Premium Insect repellent. I’ve used this stuff before and it works well. I also have Ben’s 30% DEET Tick and Insect Repellent wipes, top rated by Consumer Reports. As for Daisy, she is already on an oral flea and tick preventative. However, neither of those cover mosquitoes which of course can carry diseases and are irritating. Before the trip, I’ll apply an Advantix II treatment for her protection.
Other additional items will be clothing, toiletries, a quick-drying towel, a leash, a lead & tarp on which Daisy can lie down, my laptop for writing up reports and checking email, AirPods, my journal, and a few books to read. I tend to travel on the light side.
Well, now you have it – what the POTA Babe uses on her trips. I’d love to hear from y’all what you think would be a great addition to my set-up or a piece of equipment you prefer. For part 2, I’ll share what is currently in my POTA QRP kit. Stay tuned…
Many thank to Bob (K4RLC) who shares the following guest post:
POTA with Blackbeard in Bath, North Carolina
de Bob (K4RLC)
While in Eastern North Carolina for the North Carolina QSO party, I decided to take a trip to visit historic Bath, North Carolina, the oldest city in our state and one of the original 13 colonies.
Bath, named after the English Earl of Bath, was founded in the late 1600s. It soon became the first port for the Carolina colony, then soon thereafter, the center for the colony’s government.
While I enjoy the wilder side of POTA, like state forests and game lands, and the mountains of SOTA, these historic sites often have a vibe that lets the mind wander back in history.
Additionally, two historic houses had recently been added to the POTA program: the Palmer-Marsh House (US-10388) and the Bonner House (US-10263). The Palmer-Marsh House was built in 1744 by Captain Michael Coutanch, the original governor who came from the Isle of Jersey. The house was sold around 1762 to Robert Palmer, then later to the Marsh family around 1805. It is deemed the oldest standing house in North Carolina. While this state historic/POTA site had been activated on SSB, it had not been activated on Morse code yet, and it was appealing to me to be the first CW activator.
Palmer-Marsh House
It was a quiet clear Saturday morning with beautiful Carolina blue skies and chilly temps when I arrived at the Palmer-Marsh House.
The house itself was closed and open only to guided tours, however there were large open grounds with pathways, benches, and a family cemetery for the Marsh family. I had my North Face RECON pack full of the Elecraft KX2 set up I’ve taken overseas, and ready for almost everything.
On the bench near the cemetery there were no overhanging ancient oak branches. I set up the KX2 and laid down the screen wire counterpoise. On top of that, I put a 17 foot Chameleon whip which is resonant on 20 M CW, without wire counterpoises, and running only 5 watts. The key was the CW Morse SP4 key.
Not knowing what would happen, I called CQ and was quickly answered by multiple stations wanting to work this new POTA site for the first time.
KX2 Setup in the Palmer House back yardPalmer Family Cemetery
This entire section of town is loaded with historic houses. If you walk a few blocks down Main Street to Bonner Point, turn left on Front Street, and turn left again on King Street toward the visitor center, you will cover over 300 years of history, in a few blocks.
While the visitor center in the old school building is a POTA site, I chose the other POTA site in Bath – the Bonner House, built around 1830. This is the second house on the site, as John Lawson, the founder of Bath, built a house there which no longer stands. The entire original town boundary is considered a National Register Historic District.
I walked down Main Street to Bonner Point and Bonner House. From the Bonner House, I was looking into the Pamlico River sound fed by Bath Creek, with its deep blue water.
It took a moment to process, but I soon decoded waveforms of a school of dolphins playing close to the shore. They were incredibly graceful and efficient breaking the water. My over analytic mind tried to discern a pattern – could they be responding to the sound of Morse code? Or, simply a highly evolved graceful sea creature at play.
Bonner HouseLooking at Pamlico Sound
In just a few hours, propagation seemed to have changed so it was difficult to make the requisite contacts still on 20 m CW with the same KX2 and antenna setup. My mind wandered back in history to the historical street sign to my right that said that Edward Teach had made his home here in 1713, while taking a brief break after the King’s pardon.
Most people know Teach by his more famous nickname of Blackbeard the Pirate. My mind time traveled, and I wondered what it would be like to have sailed with Blackbeard and his outrageous exploits in his time, or what he would’ve thought of the KX2 in our time!
Teach sign at Pamlico Sound
Not wanting to leave the site right away, I enjoyed the typical lunch my YL Alanna K4AAC makes for a me on sojourns away from home – a really good peanut butter and jelly sandwich with fruit punch Gatorade and a Reese cup. It’s great brain food for all the cognitive processing needed for Morse Code.
After a wonderful morning taking in Bath and being the first to activate the Palmer-Marsh house for POTA CW, I packed up my KX2 kit and headed off for nearby Goose Creek State Park (US-2731) where the other Dr. Bob , W4TTX and I were setting up as NC4QP, a bonus station for the North Carolina QSO party.
As there is still one more POTA site to activate, a return trip to historic Bath is on the list to take in its wonderful ambience, watch dolphins and daydream about Blackbeard playing radio.
Sunday, March 10th, my son had another Dungeons & Dragons session. I figured why not play QRP radio again on the north end of Skidaway Island at the University of Georgia Skidaway Institute of Oceanography. The weather appeared more conducive for radio than my previous visit. My friend Glenn W4YES accompanied me.
Skidaway Island’s Location in Savannah, GA area from Google MapsUGA Institute of Oceanography at north end of island as per Google Maps
I chose as my location the bluff behind the aquarium which contains picnic tables and looks out over the intracoastal waterway. There was a stiff breeze but what a pretty place to play radio!
My QTH on the bluff
The Straight Key Century Club (SKCC) was holding the Weekend Sprintathon (WES), a monthly event for members. As I mentioned in my previous Skidaway article, SKCC is an organization with 28,000 plus members that use mechanical keys (straight, cootie, and bug) for their QSOs. Participating in their sprints is a simple way (like POTA) for new ops to gain experience and build confidence.
I figured I’d accomplish several things at once today: get more QRP experience with something other than POTA, garner a few more QSOs on my march toward Senator for SKCC, and use the AX1.
In researching my upcoming summer POTA trip, I read a post by Bob Condor (K4RLC) on the W4SOTA groups.io about modifications to the AX1. I plan to attempt my first SOTA activations during the trip and want light, nimble antenna options.
Admittedly, the AX1 and I haven’t been on the best terms. Bob modified his by adding three 14’ radials instead of the counterpoises with which the antenna comes. He used this configuration during a trip to Greece and had good results. I figured, why not give it a try? It was easy to make the radials with a lug connector on each end to add them to the AX1 mount on my Joby Gorillapod (the only tripod I currently have).
While Glenn took a leisurely walk on the nature trail at the bluff, I began on 20 meters.
I engaged the ATU which dropped the SWR from 2.2 down to 1. There were a lot of stations on 20 meters but I finally found a place to settle. After 8 minutes calling CQ, Randy K8ZAA answered me and gave me a 579 in MI, a good signal report for the AX1.
Given the paucity of stations answering my CQ, I decided to move to 17 meters but realized the WARC bands are not allowed in the SKCC WES so I opted for 15 meters instead. After a few minutes calling CQ, Bob AF5Z answered me. He gave me a 449 in Texas.
It became quiet again after that QSO so I jumped to 40 meters, had no callers, and moved back to 20 meters. After 10 minutes calling CQ, Jerry WA4JK answered me and gave me a 559 in Alabama. By this point, the wind had increased and Glenn and I had enough of being buffeted by what felt like gale-force winds. However, I still had an hour and a half before my son’s Dungeons & Dragons session ended so this POTA Babe wasn’t ready to call it quits. Continue reading The POTA Babe and AX1 Make Up→
Do you remember the last time you arrived at a new vantage point on a hiking trail and all of a sudden you were stunned by a view that you didn’t expect at all?
“No kidding.” I said when I approached the summit of Mount Caroline Livermoore on Angel Island and “bang” there it was: San Francisco Bay showing itself from its best side all around and in beautiful sunlight. Wow what a moment to remember.
Is this CGI?
If you’re passing through San Francisco and you’re looking for the perfect ham radio-infused hiking day trip and a very hard-to-beat city panorama, Angel Island is your ticket to a heavenly experience. If you’re the fast type you could get an activation done in half a day even including the summit. My two cents though: Bring a little time and let it soak all the way in. It’s worth it and not just because you can log three references in one go:
Angel Island State Park is covered by the very large Golden Gate National Recreation Area. If you are eager to read about the history of Angel Island you can do so here or here (former immigration station).
A few hours earlier:
KX2 radio kit, sandwich, granola bars, water. The contents of my backpack on November 8th 2023. This was going to be a good day. I just knew it when I approached the dock at San Francisco Ferry Terminal (Gate B).
See ‘ya city life
I had a couple of minutes left so I enjoyed walking through the ferry building with all its nice shops, bakeries and cafes. Many options for advanced coffee-heads to get their fix before going aboard.
Yes please
The ferry takes you across the bay in just about 30 minutes, past Alcatraz Island and without noticing you’ll have left big city life behind and swapped it for a remarkable landscape. You can check out their service times here and make sure to keep an eye on the last departure from the island. Otherwise you’ll have to stay for the night. Also the only restaurant on the island was closed (for renovation?) and I am not sure what their plans are to open again.
Alcatraz
From the arrival dock at Ayala Cove I decided to start the hike towards the north-east side of the island via the North Ridge Trail. It takes the better part of an hour to get to the summit if you walk at a constant pace but of course depending on your level of fitness and also how much time you take to enjoy the views. The trails are in very good shape and there is nothing keeping you from finding your personal and comfortable rhythm up the mountain.
Yes I admit it – I am getting excited before an activation. Most likely it’s because I am looking forward to having fun on the airwaves but then it’s also about not knowing what to expect at the operating site and how to tackle potential challenges. So I usually try to get there fast.
At the summit:
I was still catching my breath from the not-so-difficult ascent and then I saw a demounted truss mast lying on the ground. Should I try to somehow get this up pointing towards the sky and use it as an antenna support? Tempting, but given the fact that I was alone and lacking proper guying material it seemed a bit mad. This brings me to an important fact: There are pretty much no usable trees inside the activation zone when it comes to hoisting a wire. So I do recommend bringing some form of a mast. A luxury I didn’t have due to luggage restrictions on my flight to the U.S.. So the trusty Elecraft AX1 needed to make do.
Should I or should I not?
There is however a very nice picnic area just below the summit and well inside the AZ. It doesn’t have a roof and it might get a bit windy but it sports a fabulous view and plenty of options to attach masts. Luckily, I was completely alone for the most part of the activation so I didn’t need to worry as much about someone tripping over the counterpoise wire. I used a second round of 50+ sunscreen on my central-European mozzarella body and got the antenna tuned up.
Downtown San Francisco and Alcatraz Island
A few seconds into calling CQ on 20m K6EL came in 599+ from a summit nearby and I was super happy to log him given the fact that we had completed an activation together only one day before. He was followed by many US operators almost all the way over to the east coast and then, of course, Chris (F4WBN) from France. Wait – which antenna was I using again in W6?
Dream operating location
I have “whipped out” this compromised whip so many times to complete an activation that it has become one of my favorite antennas in the arsenal. What fun to reach France from the West Coast with it.
40 QSOs on 20&17m later (yes including some S2S SSB via the KX2’s internal mic and even a contact on 15m thanks to the capable tuner) I had to go QRT because the sun was strong and I wanted to make sure I had a relaxed hike back down.
Testing the transmit and receive capabilities of a QRP dummy load
Because you get a couple of loop trail options you will also get a completely new perspective of the island and landscape while walking back to the dock which is nice. It is worth mentioning that poison oak is pretty common there and branches of these plants hang down across the paths. I actually touched a leaf accidentally with my arm but was lucky not to get a full load of the poison. The itching was already gone in about an hour.
At the dock I had a nice chat with some of the rangers and then hopped on the ferry back to SF. Thanks to all chasers and hunters for making this a truly special day.
Many thanks to Brian (K3ES) who shares the following field report:
Molly is on the trail of a POTA activation. Temperatures are in the 40s, but there is still snow on the ground.
A Hike and a 2-fer
by Brian (K3ES)
When you live in northwestern Pennsylvania, and a February day shows up with the sun shining, moderate temperatures, and nothing pressing on the calendar, it is time to go and enjoy the outdoors.
One of the best ways to do that is to take a hike with your dog. Hopefully your dog is like Molly, who doesn’t mind taking a break mid-hike for a Parks on the Air (POTA) activation. So on Wednesday, February 21 we scheduled an activation and jumped in the truck for a drive to the trail head. The hike to and from the activation site would be a nice change from the short walks we had been taking to the pond behind our house in the colder weather, and from activating while sitting in the truck. And, to better share the joy with our POTA hunters, we would make this activation a 2-fer, giving them credit for both the North Country Trail National Scenic Trail (K-4239) and Pennsylvania State Game Land 024 (K-8725).
Molly is ready to go. She is not at all amused by waiting for me to take pictures.
Since I had hiked the planned route before, both solo, with friends, and with Molly, I expected that the route would be familiar. Some of it was, and some of it was brand new to us. You see, the North Country Trail volunteers had been busy since we last hiked as far up the trail as we planned to go. They had cleared and marked an entirely new route for one section of the trail, bypassing an old favorite activation site! So, we got to do some exploring, and we found a new favorite activation site. Bonus!
Finding a New 2-fer Site
One of the things that I enjoy about POTA is planning my activation.
Since days long ago as a Boy Scout, I have enjoyed outdoor navigation. Map and compass always fascinated me. Things have gotten much easier with Global Positioning System (GPS), online maps, and online satellite imagery. Still, I do most of my activation planning while sitting comfortably at home with a tablet or a computer. For this trip, finding the newly marked trail (that had not yet been transferred to the online map) presented a bit of a challenge. While I could follow the marked trail easily, I needed to be sure that I had entered Game Land property so that the 2-fer activation would be valid.
Thankfully, I had access to an app on my smart phone to help me solve this problem as we walked along the trail through the woods. The On X Hunt app combines GPS, topographic maps, satellite imagery, and tax office databases to identify land ownership (even when the owner happens to be the Commonwealth of Pennsylvania). Full functionality of this app is not free, but as the owner of a parcel of land, it is something I had elected to pay for. Once it became clear that the newly marked trail would not quickly rejoin the prior route, I set up the app to record our track on the map. After confirming that Molly and I had definitely crossed PA Game Land property line (there were no marking signs along the new trail), we went just a bit further, then found a promising spot to set up for the activation.
With a change to the K-4239 North Country Scenic Trail route, we found a new 2-fer site within K-8725, along the partially snow-covered Game Land road that carries this section of the Trail.
Setting Up to Activate
I chose to locate our station in the woods beside a Game Land road that provided the path for the North Country Trail in that particular area. We set up on the inside of a bend flanked by trees with long overhanging branches. I placed my chair in the woods on the inside of the bend, and tossed a throw line over a branch on the outside of the bend, then deployed my Packtenna EFRW with 71 ft wire as an inverted V across the road. I used the throw line to hoist the middle of the radiating wire up about 30 ft, and secured both the feedpoint and the far end of the antenna to nearby trees, about 6 ft off the ground.
Even though I did not expect traffic on this road (shaded areas were still snow covered, and the snow showed tracks only from woodland creatures), I try to deploy my wire antennas high enough that they are not a hazard to others who may travel through.
Temperatures were rising, but with the high only expected to hit 50F, I brought a blanket to give Molly some additional insulation (though she is a rough, tough POTA dog, as a Boston Terrier, her coat is not particularly thick). I laid out the blanket beside my operating position, so that it could provide both top cover and insulation from the ground.
Many thanks to Dale (N3HXZ) who shares the following field report:
SOTA-Lite with the KH1
by Dale (N3HXZ)
My KH1 Edgewood Package finally arrived in late February. As an owner of a KX2, I wondered why the heck I was buying the KH1. I am perfectly satisfied with the KX2 for my SOTA operations. However, the idea of shedding a few pounds in my pack got my attention, and the notion that I could set up and be on the air in a minute or so was also intriguing. I like to do several summits a day and this would be a time saver.
I decided to take Elecraft to task by convincing myself that I could do successful activations with just the Edgewood package.
The only exception to the package was to bring along the AXE1 extender so that I could operate 40 M.
I also wanted to prove to myself that I could carry all my gear with just a waist pack (Hence SOTA Lite!). A picture of my gear is shown below. I have an older AXE1 and it does not fit into the whip post of the KH1. I reverted to using the AX1/AXE1/Whip attached to the bnc jack. I include the 33’ counterpoise for 40M, a right angle jack for the ear buds (to not conflict with the log tray), a small first aid kit, deet, a spare keyer, a power bar, and a waist pack. The total equipment weighs in at 2.9lbs (excluding water!).
My traditional SOTA gear includes the KX2, the Chameleon MPAS-Lite Vertical antenna, a small portable pad to set the gear on, and a folding stool. Along with a backpack, the equipment comes in at 17 lbs. Hence the KH1 gear saves me 14 lbs! I decided to jettison the folding stool and operate in true pedestrian style (standing) with the KH1.
Traditional SOTA gear:
KH1 SOTA gear:
Jim (KJ3D) and I have done several activations together and he also purchased the KH1. Our first outing was a day trip on March 4th from our QTH’s in Pittsburgh to Maryland to activate Marsh Hill (W3/WE-001) and Dan’s Rock (W3/WE-002).
Jim operated on 17M and 20M, I operated on 15M and 40M. My favorite band for morning operations is 15M. If you hit it right, you can work both Europe and the West Coast at the same time. 11 AM was such a time and with the KH1 at 5 watts, I was able to reach east as far as Sweden and west as far as California. Not bad for a compact transceiver, 5 watts, and a compromised whip antenna!
I decided to also check out 40M with the AX1/AXE1 on the bnc post. It tuned up nicely and I worked a couple stations (including an S2S!). The QSO map of the contacts is shown below.
The first activation also gave me some real-time experience using the log tray. I was skeptical going in as to how effective this would be, especially in a pile-up. I also like to record RST signal reports so I can report a complete QSO. The log sheets are not set up for that, but you can jot down the signal reports in a lower line. I was recording about 4-5 QSO’s per sheet. With a pile up going on, I found it easier to just stuff the sheets in my pocket after they were used up rather than trying to insert them in the log tray behind the unused sheets.
Still, I applaud Elecraft for the log tray design; doing the best you can with the real estate space available in an all-inclusive compact transceiver unit.
My operating platform switched from a rectangular pad holding the KX2 gear on my lap while sitting in a stool to operating from my left hand while standing. The picture below captures my operating set-up. As a courtesy, I like to include the chaser’s name in my QSO. I have a sheet of ‘Frequent Chasers” in my hand as a quick reference!
Having completed an initial outing to work out the kinks of operating a new rig, we took a two-day trip to the Blue Ridge mountains on March 14th-15th and activated seven summits along Skyline Drive. I wanted to see if the KH1 and my slimmed down gear would meet the challenge. T
he summit hikes along Skyline Drive are not too rigorous; roughly 0.5 to 1 mile each way with elevation gains from 200 ft. to 600 ft. We operated North Marshall (W4V/SH-009), Hogback Mountain (W4V/SH-007), The Pinnacle (W4V/SH-005), Stony Man (W4V/SH-002), Hawksbill (W4V/SH-001), and Hazeltop (W4V/SH-004). Here is a pic of Jim operating atop North Marshall.
The KH1 performed flawlessly. We operated all the bands (40/30/20/17/15). Activations got easier as we got more familiar with operating the rig. I grew very accustomed to activating standing up; Jim preferred to sit on a rock or log. What surprised the both of us was the positive impact on our physical endurance from shedding 14 lbs of gear. This cannot be underestimated for rigorous summit hikes and for me is a key reason to buy the KH1.
Another key factor was eliminating the time needed to set up and tear down a more traditional SOTA set-up (transceiver, antenna, cables, etc.).
Finally, my fears about operating 5 watts with a compromised whip antenna have vanished. From my experience having 5 operating bands is more important than more power, or a larger antenna. Below is a composite of my two-day activation QSO’s which encompassed the 5 bands available with the KH1.
Finally, the article would not be complete without a view atop Dan’s Rock (W3/WE-002) just off I68 near Cumberland MD.
No, your eyes are not deceiving you. Aside from a beautiful view looking east, you have psychedelic paint covering the rocks! At first you think this is an affront to the natural beauty of the land, but after a while it kind of grows on you. 🙂
QRP radios, product announcements, reviews, news and more. Low power amateur radio fun!
Please support QRPer by adding us to your whitelist in your ad blocker. Ads are what helps us stay online. All of our ads are ham radio related--no junk, we promise! Thank you!
So, Sunday 7th April afternoon, while in Florence, given not common family commitments, I took two buses bound for Fiesole and then walked about twenty minutes to reach reference IT-1396, Monte Ceceri Park.
Moreover, as reminded by a monument on the clearing at the summit, the mountain was the stage for Leonardo’s first flight experiments, which adds charm and historical interest to the location.
The final log shows 30 QSOs in just over an hour and a half, including various park-to-park contacts (including Nicola IU5KHP, national POTA manager, and Andrea IW0HK).
Unfortunately, an unsuccessful attempt with Dario IZ3QFG, but there will be other opportunities.
It manages to give one that feeling of familiarity – amplified by the voices of those you connect with, amazed to find yourself in a park far from home – which is why it’s no surprise that Parks on the Air is growing!
