Category Archives: Announcements

Announcements, QRP Radios, Websites

73 Radio Row: A retailer with QRP goodies

2 Comments

73RR Logo - B

(Source: 73 Radio Row press release)

A new website designed for radio amateurs, SWL’ers, CB’ers and all communications hobbyists has launched on the Internet recreating the atmosphere of the famed Radio Row in New York City.

According to its founder, Richard Fisher, KI6SN, “’73 Radio Row’ takes its cue from an era when New York’s legendary radio district bustled with communications fanatics shopping for surplus and used gear along Cortlandt Street in Lower Manhattan.” 73 Radio Row’s Web address is: http://www.73RadioRow.com

The site features used radio receivers, transmitters and transceivers, as well as unbuilt kits, new/old stock antennas, Morse instruments and station accessories of all kinds.

“We are crazy about radio, the same as everyone else,” Fisher said. “RETRO is NOWtro.” For complete details, visit: http://www.73RadioRow.com or write to: [email protected]. Call (951) 395-1923.

I discovered 73 Radio Row right after it launched–I ordered a portable ER TiCK Deluxe Keyer for the very affordable price of $26 US shipped.

IMG_20160507_073723040-001

The keyer was dispatched immediately and I received it within a couple of days.

I just noticed, this morning, that Richard has listed an American Morse Equipment Precision Straight Key for $35.

KK1+-+A

I know Richard Fisher (KI6SN) quite well and can certainly vouch for his integrity. In fact, he’s even giving a portion of 73 Radio Row proceeds to Ears To Our World–what a nice guy!

Announcements, News, Portable, Product Announcements, QRP Radios

The new LNR Precision LD-11 transceiver is essentially general coverage

1 Comment

[FYI: This is a re-post from my blog, the SWLing Post]

LNR-Precision-LD-11

A couple weeks ago, LNR Precision sent me their new LD-11 Digital Direct Conversion QRP transceiver on loan for review.

The LD-11 is basically a small, tabletop SDR transceiver. It’s like a miniature, simplified version of the Icom IC-7100 I’ve also been evaluating.

The LD-11 is an all-mode and all-band transceiver–meaning, it includes SSB, CW, CW-R, Digi, AM and FM modes on all amateur radio bands (160 – 10 meters).

Though the LD-11 isn’t advertised as having a general coverage receiver, it will indeed tune the entire HF band.

You do this by entering the LD-11’s administration mode. LNR describes this in the LD-11 product manual, but suggests you contact them for help the first time you do this. In the admin panel, you’ll find functions that allow you to set the band edges on each amateur radio band.

For a preliminary test of broadcast reception, I moved the lower band edge of the 30 meter ham radio band to 8.2 MHz.

LNR-Precision-LD-11-front panel

After saving the settings and re-starting the LD-11 in normal operation mode, I could then tune the entire 31 meter broadcast band on the LD-11.

Hypothetically, you could either widen each amateur radio band to include adjacent broadcast bands, or you could simply set one of the ham bands to include the entire HF spectrum. To make it easier to navigate and tune through the bands, I’m choosing the former method over the latter.

Since the LD-11 has a proper AM mode, broadcasts sound great–especially via headphones!

Proper AM filters for broadcast reception!

Better yet?  The AM filter width can be widened to an impressive 9.6 kHz! Woo hoo!

LNR-LD-11-Shortwave-AM

The LD-11 has four filter slots: F1, F2, F3 and F4.

The F1-F3 slots can be set to a fixed user-defined widths (common widths are default).

F4 can be altered to any available filter width without having to enter the admin mode of the transceiver. Simply press the “F” (blue function button) and the FILTER button simultaneously and use the encoder/tuning knob to specify the filter width in .1 kHz steps. Pressing the F and FILTER button simultaneously again, will save your filter width for the F4 position.

I’ve been using the F4 filter position for widths between about 8.2 and 9.6 kHz in AM.

It’s still early days with the LD-11, but I’m enjoying this little transceiver immensely. It reminds me of one of my favorite QRP transceivers of yesteryear: the Index Labs QRP Plus (though the LD-11 is much smaller, more versatile and has a much better front end than the QRP Plus!).

LNR Precision sold out all of their first run LD-11 units within moments of having announced availability. I’m willing to bet they’ll bring a few LD-11s to the upcoming Dayton Hamvention, though.

Check inventory status and view LD-11 details on LNR Precision’s website. 

Announcements, News, Portable, Product Announcements, QRP, QRP Radios

LRN Precision announces two new QRP transceivers: the LD-11 and MTR5B

1 Comment

LNR-MountainTopper-LD11-Announcement

LNR Precision announced two new QRP transceivers this weekend: the MTR5B and LD-11.

Below, you can find details I pulled from LNR’s press release and website for both units:

LNR-Precision-LD-11

The LD-11

The LD-11 is a new 11-band QRP transceiver based on the LNR’s LD-5 transceiver. The LD-11 covers from the 6 meter band down to the 160 meter band. A new feature on this model is a built-in panadapter. AM/FM/SSB and CW modes are all included.

Here is the description from LNR’s website:

The new LD-11 is Digital Direct Conversion, SDR type, build-in CPU (SM32a) DSP radio in which RF signals are directly converted to a digital data via differential and balanced A/D converters. This enables direct sampling with extremely low phase and floor noise.

The DSP is unique and features two independent channels. It also employs a unique differential algorithm within the software which is applied for IQ processing of the channels with phase suppression of the unwanted side-band channel.

The balanced ADC and DAC gives additional noise floor reduction and the receiver can handle interfering signals that are 100 dB stronger than the desired signal at a frequency separation of 10 kHz, and is about 130 dB stronger at 50 kHz separation. As the receiver and transmitter are using the same DSP channel, there is no gap between the receiver performance and the transmitter performance. Thus, there is a clean neighborhood on the bands. At the development stage, our intentions were motivated by the TX side-band noise of existing SDR manufacturers, so our aim was to fully equalize our transmitter to have noise performance that is compatible with the best modern receivers, or even better. After a arduous year of development , we think we achieved it!

This 11+ band radio is based on the LD-5, which has proven to be one of the most exciting QRP transceivers introduced in the last few years. Quite frankly, the performance rivals high end units offered by other manufactures at a much lower price point. Our motto is that we make QRP transceivers that you will want to take out in the field (without fear of breaking the bank).

LNR-Precision-LD-11-L-Side LNR-Precision-LD-11-R-Side

Note: I will review the LD-11 in the coming weeks and post images and notes here on QRPer.com.

MTR5B

The MTR5B

The new MTR5B 5-Band Mountain Topper is a fully-assembled 5-band CW transceiver KD1JV designs “Steve Weber” kit. The following are specifications/features from the LNR website:

40M, 30M, 20M, 17M, 15M
Size: 4.337″L x 3.153″W x 1.008″T
Weight: approx 6.4 OZ.

Features:

  • Switch selected 40/30/20/17/15 meter bands (no band modules to lose or change out)
  • Wide operating voltage range, 6 to 12 volts 15 ma Rx current at 12V supply
  • Efficient transmitter. Low current with 4W output
  • LCD display
  • Push button or Optional rotary tuning
  • 24 hour clock built in, with battery back up
  • Three 63 character programmable message memories
  • Message beacon mode with adjustable pause time

MTR5B-1

If you were lucky enough to grab a first production unit of either of these radios, I would love to post your overview/review! I’m looking forward to checking out the LD-11.

Announcements, News, Portable, QRP

W1SFR’s New Portable Torsion Bar Key

Leave a comment

TBP3qtrLftFront(Source: W1SFR)

New Portable Torsion Bar Key Announced by W1SFR
Jan 12, 2016—Sudbury, VT

Many of you know W1SFR from the End Fed random wire antennas that have become very popular with QRP ops around the world. The antenna design is not new and has handed down by many hams over many years, but Steve has managed to create quite a following due to his attention to construction and only using the best of materials…all at a very reasonable price.

Now he has applied that same attention to detail and high value to his new “TBP” (Torsion Bar Portable) key. Torsion bar keys use a unique combination of construction and design to provide the CW op with a different experience…one that users are saying very good things about. All of his keys feature a contact system that allows the key lever to make a “softer” contact allowing the very slightest movement when the contact post hits the stainless contact. That not only makes the key feel less “mechanical”, but also makes it much more quiet…a feature these keys are known for.

“ I make each key by hand and top them off with my trademark exotic wood finger pieces with a signature Mother-Of-Pearl dot on each finger piece…no CNC plastic here. The torsion system allows very close contact spacing and effortless CW. The TBP represents a much smaller version of my larger keys, designed to be at home in the field or in the shack.”

The new portable key follows W1SFR’s TBKII, a single lever key and the TBSK, a torsion bar straight key.

You can see all of the keys at W1SFR.com.

Note: Steve also tells me that he lowered his prices for the Christmas season and has decided to extend them for the month of January. Click here to check out his product line.

Announcements, News

RKR Designs have acquired Alpha Amplifier and TEN-TEC brands

3 Comments

Ten-Tec-Alpha(Source: TEN-TEC Press Release)

(April 2, 2015) RKR Designs, LLC of Longmont Colorado has announced that they have acquired the assets of Alpha Amplifier and TEN-TEC brands from RF Concepts. RKR plans to expand the product line, while continuing to service their customers that have enjoyed their products over the years.

The principals of RKR Designs are Richard Gall, Ken Long and Rich Danielson (Gall and Danielson of QSC Systems, Longmont, Colorado have been a successful contract manufacturer, for over 20 years). Ken Long, N0QO has over 20 years in the electronics and amateur radio industry. Long will be President and CEO of the new company. QSC has been building Alpha amplifiers for over 5 years. They have also been building boards for TEN-TEC since their purchase by RF Concepts last year. Mr. Long said “QSC has always been a fantastic contract manufacturer, and has the expertise and knowledge that will allow us to bring down costs, while increasing quality and reducing manufacturing times.”

When asked for comment, Michael Seedman, AA6DY said “I can’t think of a more capable group of people to take over the 45 year Alpha Amplifier/TEN-TEC legacy. Ken Long has been involved with the industry for years, and has a great feeling for products and operations. He has the manufacturing and engineering resources available to deliver quality products that our customers demand”. Mr. Seedman went on to say “Alpha and TEN-TEC have always had a warm spot in my heart, and I am thrilled that RKR Designs will be able to continue the operations of the business. I wish them the best”.

Ken, Richard and Rich have been working very close over the past several years and feel that this new relationship will benefit the company and customers moving forward. This closer relationship to the contract manufacturer will allow a more consistent process and delivery of quality products along with significant cost benefits.

RKR Designs LLC is privately held, and terms of the acquisition were not disclosed.

Announcements, News

Working K1N: The Navassa Island DXpedition

Leave a comment
Lighthouse OP at night LED lighting (Photo: k1N DXpedition)
Lighthouse OP at night LED lighting (Photo: k1N DXpedition)

While I love QRP and ham radio in general, I must admit that I’m not much of a DXer. I love the idea of DX, but at this point in my life, it’s hard to make time for it and, frankly, my CW skills are somewhat lacking.

I owe many thanks, though, to my good friend, Vlado (N3CZ), who sat with me yesterday at his QTH and coached me through working K1N on 15 meters CW. It was a bit like learning from a Jedi Master…er, Jedi Elmer. At any rate, it felt good to see my call in the K1N log and to know that I worked a station that may not reappear for another 25 years.

If you have the time and patience, you might try working K1N soon.  I understand the K1N team announced earlier today that they intend to tear down their stations starting this Saturday.  They will go QRT Sunday morning.

Announcements, News

Sherwood Engineering ranks the Flex 6700

Leave a comment

Flex_6700

Rob Sherwood has now tested and ranked the new FlexRadio Systems 6700 on his receiver test data page. Sherwood-RX-data

Hint: the 6700 tops the list when sorted by third-order dynamic range narrow spaced. Click here to view the results.

Announcements, News

New HRO store in Plano, Texas

1 Comment

HROLogoMany thanks to Dave (N9EWO) who writes:

Ham Radio Outlet has announced a new store location in Plano, TX planned to open in the first quarter of 2015.

see:   http://www.hamradio.com/news_announcements.cfm

Thanks, Dave!

Announcements, News

KX3 Companion App for Android

Leave a comment

KX3-companion-001

Neil, comments on (my other blog) the SWLing Post:

“An app specifically made for the Elecraft KX3 is KX3Companion (www.kx3companion.com). There are free and paid versions on Google Play (does not work on Kindle Fire).

The same author has created KX3 KeyApp to give a virtual set of keys for KX3 users. It comes with two predefined templates (CW, and default) with KX3 macros setup for use.

Finally, he created QRSS Beacon – A fully featured QRSS (Slow CW) Beacon on Android. You can select a DIT duration from 1 to 60 seconds and choose one of the 3 supported modes: QRSS, FSK/CW and DFCW. This works on any radio, connect the audio out of your Android device to the audio in of your radio and an enable VOX.

Also, HamLog is available on iOS & Android (there’s even a MAC version).”

Many thanks for sharing this, Neil!  I will add the KX3 Companion apps to our comprehensive list of ham/shortwave radio apps.

Announcements, Kits, Product Announcements

The new Splinter II kit from Breadboard Radio

1 Comment

SplinterIII’ve just learned that Bill (W4FSV) has cooked up a new QRPp receiver / transmitter kit at Breadboard Radio: the Splinter II.

In his blog, Bill mentions some of his first contacts on the Splinter II:

“I have never been to Dayton or the QRP event Four Days In May.  I hope to go someday, but you see my birthday is May 17th and it always conflicts.  My wife, kids and grandkids insist that I’m there at my party!  As thrilling as it must be to go to Dayton and FDIM, I had my own QRP adventure about a month earlier.  On April 16th I finished my own building session…the Splinter II prototype.  Later that evening I made the first two contacts with the Splinter II…KK4GFR, Jim in Clarkson, KY followed by KF2UZ, Jack in Hyde Park, NY.  Then on the 17th, I worked SV1ENG in Greece (see above).  On the 23rd I worked PA3BUD in the Netherlands.  Finally, on the 24th I had a QSO with SM6CWK in Sweden.

These contacts were especially nice since they were all new countries for my QRPp totals.

Yes, I really wanted to go to Dayton, but my Four Days In April were still pretty cool!”

Bill, I must say, you certainly would enjoy Four Days In May. We’ll sing Happy Birthday to you if you make it next year!

The Splinter II can be ordered online at BreadboardRadio.com.

Thanks for the update, Bill!